Lukasz Majewski [Mon, 10 Jun 2024 13:39:14 +0000 (15:39 +0200)]
net: hsr: Send supervisory frames to HSR network with ProxyNodeTable data
This patch provides support for sending supervision HSR frames with
MAC addresses stored in ProxyNodeTable when RedBox (i.e. HSR-SAN) is
enabled.
Supervision frames with RedBox MAC address (appended as second TLV)
are only send for ProxyNodeTable nodes.
This patch series shall be tested with hsr_redbox.sh script.
Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patchset for the lantiq_gswip driver is a collection of minor fixes
and coding improvements by Martin Blumenstingl without any real changes
in the actual functionality.
====================
Martin Blumenstingl [Tue, 11 Jun 2024 13:54:33 +0000 (15:54 +0200)]
net: dsa: lantiq_gswip: Update comments in gswip_port_vlan_filtering()
Update the comments in gswip_port_vlan_filtering() so it's clear that
there are two separate cases, one for "tag based VLAN" and another one
for "port based VLAN".
Suggested-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Martin Schiller <ms@dev.tdt.de> Link: https://lore.kernel.org/r/20240611135434.3180973-12-ms@dev.tdt.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin Schiller [Tue, 11 Jun 2024 13:54:32 +0000 (15:54 +0200)]
net: dsa: lantiq_gswip: Remove dead code from gswip_add_single_port_br()
The port validation in gswip_add_single_port_br() is superfluous and
can be omitted.
Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Martin Schiller <ms@dev.tdt.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20240611135434.3180973-11-ms@dev.tdt.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin Blumenstingl [Tue, 11 Jun 2024 13:54:31 +0000 (15:54 +0200)]
net: dsa: lantiq_gswip: Consistently use macros for the mac bridge table
Only bits [5:0] in mac_bridge.key[3] are reserved for the FID.
Also, for dynamic (learned) entries, bits [7:4] in mac_bridge.val[0]
represents the port.
Introduce new macros GSWIP_TABLE_MAC_BRIDGE_KEY3_FID and
GSWIP_TABLE_MAC_BRIDGE_VAL0_PORT macro and use it throughout the driver.
Also rename and update GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC to use the
BIT() macro. This makes the driver code easier to understand.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Martin Schiller <ms@dev.tdt.de> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20240611135434.3180973-10-ms@dev.tdt.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin Schiller [Tue, 11 Jun 2024 13:54:28 +0000 (15:54 +0200)]
net: dsa: lantiq_gswip: do also enable or disable cpu port
Before commit 74be4babe72f ("net: dsa: do not enable or disable non user
ports"), gswip_port_enable/disable() were also executed for the cpu port
in gswip_setup() which disabled the cpu port during initialization.
Let's restore this by removing the dsa_is_user_port checks. Also, let's
clean up the gswip_port_enable() function so that we only have to check
for the cpu port once. The operation reordering done here is safe.
Signed-off-by: Martin Schiller <ms@dev.tdt.de> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20240611135434.3180973-7-ms@dev.tdt.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin Blumenstingl [Tue, 11 Jun 2024 13:54:26 +0000 (15:54 +0200)]
net: dsa: lantiq_gswip: Use dev_err_probe where appropriate
dev_err_probe() can be used to simplify the existing code. Also it means
we get rid of the following warning which is seen whenever the PMAC
(Ethernet controller which connects to GSWIP's CPU port) has not been
probed yet:
gswip 1e108000.switch: dsa switch register failed: -517
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Martin Schiller <ms@dev.tdt.de> Link: https://lore.kernel.org/r/20240611135434.3180973-5-ms@dev.tdt.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin Schiller [Tue, 11 Jun 2024 13:54:25 +0000 (15:54 +0200)]
net: dsa: lantiq_gswip: add terminating \n where missing
Some dev_err are missing the terminating \n. Let's add that.
Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Martin Schiller <ms@dev.tdt.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20240611135434.3180973-4-ms@dev.tdt.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin Blumenstingl [Tue, 11 Jun 2024 13:54:24 +0000 (15:54 +0200)]
net: dsa: lantiq_gswip: Only allow phy-mode = "internal" on the CPU port
Add the CPU port to gswip_xrx200_phylink_get_caps() and
gswip_xrx300_phylink_get_caps(). It connects through a SoC-internal bus,
so the only allowed phy-mode is PHY_INTERFACE_MODE_INTERNAL.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Martin Schiller <ms@dev.tdt.de> Link: https://lore.kernel.org/r/20240611135434.3180973-3-ms@dev.tdt.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin Schiller [Tue, 11 Jun 2024 13:54:23 +0000 (15:54 +0200)]
dt-bindings: net: dsa: lantiq,gswip: convert to YAML schema
Convert the lantiq,gswip bindings to YAML format.
Also add this new file to the MAINTAINERS file.
Furthermore, the CPU port has to specify a phy-mode and either a phy or
a fixed-link. Since GSWIP is connected using a SoC internal protocol
there's no PHY involved. Add phy-mode = "internal" and a fixed-link to
the example code to describe the communication between the PMAC
(Ethernet controller) and GSWIP switch.
Signed-off-by: Martin Schiller <ms@dev.tdt.de> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20240611135434.3180973-2-ms@dev.tdt.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- geneve: fix incorrectly setting lengths of inner headers in the
skb, confusing the drivers and causing mangled packets
- sched: initialize noop_qdisc owner to avoid false-positive
recursion detection (recursing on CPU 0), which bubbles up to user
space as a sendmsg() error, while noop_qdisc should silently drop
- netdevsim: fix backwards compatibility in nsim_get_iflink()
Previous releases - always broken:
- netfilter: ipset: fix race between namespace cleanup and gc in the
list:set type"
* tag 'net-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
bnxt_en: Adjust logging of firmware messages in case of released token in __hwrm_send()
af_unix: Read with MSG_PEEK loops if the first unread byte is OOB
bnxt_en: Cap the size of HWRM_PORT_PHY_QCFG forwarded response
gve: Clear napi->skb before dev_kfree_skb_any()
ionic: fix use after netif_napi_del()
Revert "igc: fix a log entry using uninitialized netdev"
net: bridge: mst: fix suspicious rcu usage in br_mst_set_state
net: bridge: mst: pass vlan group directly to br_mst_vlan_set_state
net/ipv6: Fix the RT cache flush via sysctl using a previous delay
net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters
gve: ignore nonrelevant GSO type bits when processing TSO headers
net: pse-pd: Use EOPNOTSUPP error code instead of ENOTSUPP
netfilter: Use flowlabel flow key when re-routing mangled packets
netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type
netfilter: nft_inner: validate mandatory meta and payload
tcp: use signed arithmetic in tcp_rtx_probe0_timed_out()
mailmap: map Geliang's new email address
mptcp: pm: update add_addr counters after connect
mptcp: pm: inc RmAddr MIB counter once per RM_ADDR ID
mptcp: ensure snd_una is properly initialized on connect
...
Linus Torvalds [Thu, 13 Jun 2024 18:07:32 +0000 (11:07 -0700)]
Merge tag 'nfs-for-6.10-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
"Bugfixes:
- NFSv4.2: Fix a memory leak in nfs4_set_security_label
- NFSv2/v3: abort nfs_atomic_open_v23 if the name is too long.
- NFS: Add appropriate memory barriers to the sillyrename code
- Propagate readlink errors in nfs_symlink_filler
- NFS: don't invalidate dentries on transient errors
- NFS: fix unnecessary synchronous writes in random write workloads
- NFSv4.1: enforce rootpath check when deciding whether or not to trunk
Other:
- Change email address for Trond Myklebust due to email server concerns"
* tag 'nfs-for-6.10-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: add barriers when testing for NFS_FSDATA_BLOCKED
SUNRPC: return proper error from gss_wrap_req_priv
NFSv4.1 enforce rootpath check in fs_location query
NFS: abort nfs_atomic_open_v23 if name is too long.
nfs: don't invalidate dentries on transient errors
nfs: Avoid flushing many pages with NFS_FILE_SYNC
nfs: propagate readlink errors in nfs_symlink_filler
MAINTAINERS: Change email address for Trond Myklebust
NFSv4: Fix memory leak in nfs4_set_security_label
Linus Torvalds [Thu, 13 Jun 2024 17:09:29 +0000 (10:09 -0700)]
Merge tag 'fixes-2024-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fixes from Mike Rapoport:
"Fix validation of NUMA coverage.
memblock_validate_numa_coverage() was checking for a unset node ID
using NUMA_NO_NODE, but x86 used MAX_NUMNODES when no node ID was
specified by buggy firmware.
Update memblock to substitute MAX_NUMNODES with NUMA_NO_NODE in
memblock_set_node() and use NUMA_NO_NODE in x86::numa_init()"
* tag 'fixes-2024-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
x86/mm/numa: Use NUMA_NO_NODE when calling memblock_set_node()
memblock: make memblock_set_node() also warn about use of MAX_NUMNODES
Aleksandr Mishin [Tue, 11 Jun 2024 08:25:46 +0000 (11:25 +0300)]
bnxt_en: Adjust logging of firmware messages in case of released token in __hwrm_send()
In case of token is released due to token->state == BNXT_HWRM_DEFERRED,
released token (set to NULL) is used in log messages. This issue is
expected to be prevented by HWRM_ERR_CODE_PF_UNAVAILABLE error code. But
this error code is returned by recent firmware. So some firmware may not
return it. This may lead to NULL pointer dereference.
Adjust this issue by adding token pointer check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 8fa4219dba8e ("bnxt_en: add dynamic debug support for HWRM messages") Suggested-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240611082547.12178-1-amishin@t-argos.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rao Shoaib [Tue, 11 Jun 2024 08:46:39 +0000 (01:46 -0700)]
af_unix: Read with MSG_PEEK loops if the first unread byte is OOB
Read with MSG_PEEK flag loops if the first byte to read is an OOB byte.
commit 22dd70eb2c3d ("af_unix: Don't peek OOB data without MSG_OOB.")
addresses the loop issue but does not address the issue that no data
beyond OOB byte can be read.
Michael Chan [Wed, 12 Jun 2024 23:17:36 +0000 (16:17 -0700)]
bnxt_en: Cap the size of HWRM_PORT_PHY_QCFG forwarded response
Firmware interface 1.10.2.118 has increased the size of
HWRM_PORT_PHY_QCFG response beyond the maximum size that can be
forwarded. When the VF's link state is not the default auto state,
the PF will need to forward the response back to the VF to indicate
the forced state. This regression may cause the VF to fail to
initialize.
Fix it by capping the HWRM_PORT_PHY_QCFG response to the maximum
96 bytes. The SPEEDS2_SUPPORTED flag needs to be cleared because the
new speeds2 fields are beyond the legacy structure. Also modify
bnxt_hwrm_fwd_resp() to print a warning if the message size exceeds 96
bytes to make this failure more obvious.
Fixes: 84a911db8305 ("bnxt_en: Update firmware interface to 1.10.2.118") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240612231736.57823-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ziwei Xiao [Wed, 12 Jun 2024 00:16:54 +0000 (00:16 +0000)]
gve: Clear napi->skb before dev_kfree_skb_any()
gve_rx_free_skb incorrectly leaves napi->skb referencing an skb after it
is freed with dev_kfree_skb_any(). This can result in a subsequent call
to napi_get_frags returning a dangling pointer.
Fix this by clearing napi->skb before the skb is freed.
Taehee Yoo [Wed, 12 Jun 2024 06:04:46 +0000 (06:04 +0000)]
ionic: fix use after netif_napi_del()
When queues are started, netif_napi_add() and napi_enable() are called.
If there are 4 queues and only 3 queues are used for the current
configuration, only 3 queues' napi should be registered and enabled.
The ionic_qcq_enable() checks whether the .poll pointer is not NULL for
enabling only the using queue' napi. Unused queues' napi will not be
registered by netif_napi_add(), so the .poll pointer indicates NULL.
But it couldn't distinguish whether the napi was unregistered or not
because netif_napi_del() doesn't reset the .poll pointer to NULL.
So, ionic_qcq_enable() calls napi_enable() for the queue, which was
unregistered by netif_napi_del().
igc_ptp_init() needs to be called before igc_reset(), otherwise kernel
crash could be observed. Following the corresponding discussion [1] and
[2] revert this commit.
CDC-NCM: add support for Apple's private interface
Available on iOS/iPadOS >= 17, where this new interface is used by
developer tools using the new RemoteXPC protocol.
This private interface lacks a status endpoint, presumably because there
isn't a physical cable that can be unplugged, nor any speed changes to
be notified about.
Note that NCM interfaces are not exposed until a mode switch is
requested, which macOS does automatically.
This set fixes a suspicious RCU usage warning triggered by syzbot[1] in
the bridge's MST code. After I converted br_mst_set_state to RCU, I
forgot to update the vlan group dereference helper. Fix it by using
the proper helper, in order to do that we need to pass the vlan group
which is already obtained correctly by the callers for their respective
context. Patch 01 is a requirement for the fix in patch 02.
Note I did consider rcu_dereference_rtnl() but the churn is much bigger
and in every part of the bridge. We can do that as a cleanup in
net-next.
Nikolay Aleksandrov [Sun, 9 Jun 2024 10:36:54 +0000 (13:36 +0300)]
net: bridge: mst: fix suspicious rcu usage in br_mst_set_state
I converted br_mst_set_state to RCU to avoid a vlan use-after-free
but forgot to change the vlan group dereference helper. Switch to vlan
group RCU deref helper to fix the suspicious rcu usage warning.
Nikolay Aleksandrov [Sun, 9 Jun 2024 10:36:53 +0000 (13:36 +0300)]
net: bridge: mst: pass vlan group directly to br_mst_vlan_set_state
Pass the already obtained vlan group pointer to br_mst_vlan_set_state()
instead of dereferencing it again. Each caller has already correctly
dereferenced it for their context. This change is required for the
following suspicious RCU dereference fix. No functional changes
intended.
====================
net: flower: validate encapsulation control flags
Now that all drivers properly rejects unsupported flower control flags
used with FLOW_DISSECTOR_KEY_CONTROL, then time has come to add similar
checks to the drivers supporting FLOW_DISSECTOR_KEY_ENC_CONTROL.
There are currently just 4 drivers supporting this key, and
3 of those currently doesn't validate encapsulated control flags.
Encapsulation control flags may currently be unused, but they should
still be validated by the drivers, so that drivers will properly
reject any new flags when they are introduced.
This series adds some helper functions, and implements them in all
4 drivers.
NB: It is currently discussed[1] to use encapsulation control flags
for tunnel flags instead of the new FLOW_DISSECTOR_KEY_ENC_FLAGS.
Encapsulation control flags are currently not used anywhere,
so all flags are currently unsupported by all drivers.
This patch adds validation of this assumption, so that
encapsulation flags may be used in the future.
In case any encapsulation control flags are masked,
flow_rule_match_has_enc_control_flags() sets a NL extended
error message, and we return -EOPNOTSUPP.
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Davide Caratti <dcaratti@redhat.com> Link: https://lore.kernel.org/r/20240609173358.193178-6-ast@fiberby.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Encapsulation control flags are currently not used anywhere,
so all flags are currently unsupported by all drivers.
This patch adds validation of this assumption, so that
encapsulation flags may be used in the future.
In case any encapsulation control flags are masked,
flow_rule_match_has_enc_control_flags() sets a NL extended
error message, and we return -EOPNOTSUPP.
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Signed-off-by: Louis Peens <louis.peens@corigine.com> Reviewed-by: Davide Caratti <dcaratti@redhat.com> Link: https://lore.kernel.org/r/20240609173358.193178-5-ast@fiberby.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/mlx5e: flower: validate encapsulation control flags
Encapsulation control flags are currently not used anywhere,
so all flags are currently unsupported by all drivers.
This patch adds validation of this assumption, so that
encapsulation flags may be used in the future.
In case any encapsulation control flags are masked,
flow_rule_match_has_enc_control_flags() sets a NL extended
error message, and we return -EOPNOTSUPP.
flow_offload: add encapsulation control flag helpers
This patch adds two new helper functions:
flow_rule_is_supp_enc_control_flags()
flow_rule_has_enc_control_flags()
They are intended to be used for validating encapsulation control
flags, and compliment the similar helpers without "enc_" in the name.
The only difference is that they have their own error message,
to make it obvious if an unsupported flag error is related to
FLOW_DISSECTOR_KEY_CONTROL or FLOW_DISSECTOR_KEY_ENC_CONTROL.
flow_rule_has_enc_control_flags() is for drivers supporting
FLOW_DISSECTOR_KEY_ENC_CONTROL, but not supporting any
encapsulation control flags.
(Currently all 4 drivers fits this category)
flow_rule_is_supp_enc_control_flags() is currently only used
for the above helper, but should also be used by drivers once
they implement at least one encapsulation control flag.
There is AFAICT currently no need for an "enc_" variant of
flow_rule_match_has_control_flags(), as all drivers currently
supporting FLOW_DISSECTOR_KEY_ENC_CONTROL, are already calling
flow_rule_match_enc_control() directly.
Petr Pavlu [Fri, 7 Jun 2024 11:28:28 +0000 (13:28 +0200)]
net/ipv6: Fix the RT cache flush via sysctl using a previous delay
The net.ipv6.route.flush system parameter takes a value which specifies
a delay used during the flush operation for aging exception routes. The
written value is however not used in the currently requested flush and
instead utilized only in the next one.
A problem is that ipv6_sysctl_rtcache_flush() first reads the old value
of net->ipv6.sysctl.flush_delay into a local delay variable and then
calls proc_dointvec() which actually updates the sysctl based on the
provided input.
Fix the problem by switching the order of the two operations.
Fixes: 4990509f19e8 ("[NETNS][IPV6]: Make sysctls route per namespace.") Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240607112828.30285-1-petr.pavlu@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Elad Yifee [Fri, 7 Jun 2024 08:21:50 +0000 (11:21 +0300)]
net: ethernet: mtk_eth_soc: ppe: add support for multiple PPEs
Add the missing pieces to allow multiple PPEs units, one for each GMAC.
mtk_gdm_config has been modified to work on targted mac ID,
the inner loop moved outside of the function to allow unrelated
operations like setting the MAC's PPE index.
Introduce a sanity check in flow_offload_replace to account for
non-MTK ingress devices.
Additional field 'ppe_idx' was added to struct mtk_mac in order
to keep track on the assigned PPE unit.
Linus Torvalds [Wed, 12 Jun 2024 23:58:05 +0000 (16:58 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM and clkdev fixes from Russell King:
- Fix clkdev - erroring out on long strings causes boot failures, so
don't do this. Still warn about the over-sized strings (which will
never match and thus their registration with clkdev is useless)
- Fix for ftrace with frame pointer unwinder with recent GCC changing
the way frames are stacked.
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9405/1: ftrace: Don't assume stack frames are contiguous in memory
clkdev: don't fail clkdev_alloc() if over-sized
====================
Allow configuration of multipath hash seed
Let me just quote the commit message of patch #2 here to inform the
motivation and some of the implementation:
When calculating hashes for the purpose of multipath forwarding,
both IPv4 and IPv6 code currently fall back on
flow_hash_from_keys(). That uses a randomly-generated seed. That's a
fine choice by default, but unfortunately some deployments may need
a tighter control over the seed used.
In this patchset, make the seed configurable by adding a new sysctl
key, net.ipv4.fib_multipath_hash_seed to control the seed. This seed
is used specifically for multipath forwarding and not for the other
concerns that flow_hash_from_keys() is used for, such as queue
selection. Expose the knob as sysctl because other such settings,
such as headers to hash, are also handled that way.
Despite being placed in the net.ipv4 namespace, the multipath seed
sysctl is used for both IPv4 and IPv6, similarly to e.g. a number of
TCP variables. Like those, the multipath hash seed is a per-netns
variable.
The seed used by flow_hash_from_keys() is a 128-bit quantity.
However it seems that usually the seed is a much more modest value.
32 bits seem typical (Cisco, Cumulus), some systems go even lower.
For that reason, and to decouple the user interface from
implementation details, go with a 32-bit quantity, which is then
quadruplicated to form the siphash key.
One example of use of this interface is avoiding hash polarization,
where two ECMP routers, one behind the other, happen to make consistent
hashing decisions, and as a result, part of the ECMP space of the latter
router is never used. Another is a load balancer where several machines
forward traffic to one of a number of leaves, and the forwarding
decisions need to be made consistently. (This is a case of a desired
hash polarization, mentioned e.g. in chapter 6.3 of [0].)
There has already been a proposal to include a hash seed control
interface in the past[1].
- Patches #1-#2 contain the substance of the work
- Patch #3 is an mlxsw offload
- Patches #4 and #5 are a selftest
Petr Machata [Fri, 7 Jun 2024 15:13:57 +0000 (17:13 +0200)]
selftests: forwarding: router_mpath_hash: Add a new selftest
Add a selftest that exercises the sysctl added in the previous patches.
Test that set/get works as expected; that across seeds we eventually hit
all NHs (test_mpath_seed_*); and that a given seed keeps hitting the same
NHs even across seed changes (test_mpath_seed_stability_*).
Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240607151357.421181-6-petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When Spectrum machines compute hash for the purposes of ECMP routing, they
use a seed specified through RECR_v2 (Router ECMP Configuration Register).
Up until now mlxsw computed the seed by hashing the machine's base MAC.
Now that we can optionally have a user-provided seed, use that if possible.
Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240607151357.421181-4-petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Fri, 7 Jun 2024 15:13:54 +0000 (17:13 +0200)]
net: ipv4: Add a sysctl to set multipath hash seed
When calculating hashes for the purpose of multipath forwarding, both IPv4
and IPv6 code currently fall back on flow_hash_from_keys(). That uses a
randomly-generated seed. That's a fine choice by default, but unfortunately
some deployments may need a tighter control over the seed used.
In this patch, make the seed configurable by adding a new sysctl key,
net.ipv4.fib_multipath_hash_seed to control the seed. This seed is used
specifically for multipath forwarding and not for the other concerns that
flow_hash_from_keys() is used for, such as queue selection. Expose the knob
as sysctl because other such settings, such as headers to hash, are also
handled that way. Like those, the multipath hash seed is a per-netns
variable.
Despite being placed in the net.ipv4 namespace, the multipath seed sysctl
is used for both IPv4 and IPv6, similarly to e.g. a number of TCP
variables.
The seed used by flow_hash_from_keys() is a 128-bit quantity. However it
seems that usually the seed is a much more modest value. 32 bits seem
typical (Cisco, Cumulus), some systems go even lower. For that reason, and
to decouple the user interface from implementation details, go with a
32-bit quantity, which is then quadruplicated to form the siphash key.
Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240607151357.421181-3-petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Fri, 7 Jun 2024 15:13:53 +0000 (17:13 +0200)]
net: ipv4,ipv6: Pass multipath hash computation through a helper
The following patches will add a sysctl to control multipath hash
seed. In order to centralize the hash computation, add a helper,
fib_multipath_hash_from_keys(), and have all IPv4 and IPv6 route.c
invocations of flow_hash_from_keys() go through this helper instead.
Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240607151357.421181-2-petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 12 Jun 2024 23:28:59 +0000 (16:28 -0700)]
Merge tag 'nf-24-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patch #1 fixes insufficient sanitization of netlink attributes for the
inner expression which can trigger nul-pointer dereference,
from Davide Ornaghi.
Patch #2 address a report that there is a race condition between
namespace cleanup and the garbage collection of the list:set
type. This patch resolves this issue with other minor issues
as well, from Jozsef Kadlecsik.
Patch #3 ip6_route_me_harder() ignores flowlabel/dsfield when ip dscp
has been mangled, this unbreaks ip6 dscp set $v,
from Florian Westphal.
All of these patches address issues that are present in several releases.
* tag 'nf-24-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: Use flowlabel flow key when re-routing mangled packets
netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type
netfilter: nft_inner: validate mandatory meta and payload
====================
Linus Torvalds [Wed, 12 Jun 2024 22:08:23 +0000 (15:08 -0700)]
Merge tag 'bcachefs-2024-06-12' of https://evilpiepirate.org/git/bcachefs
Pull bcachefs fixes from Kent Overstreet:
- fix kworker explosion, due to calling submit_bio() (which can block)
from a multithreaded workqueue
- fix error handling in btree node scan
- forward compat fix: kill an old debug assert
- key cache shrinker fixes
This is a partial fix for stalls doing multithreaded creates - there
were various O(n^2) issues the key cache shrinker was hitting [1].
There's more work coming here; I'm working on a patch to delete the
key cache lock, which initial testing shows to be a pretty drastic
performance improvement
- assorted syzbot fixes
Link: https://lore.kernel.org/linux-bcachefs/CAGudoHGenxzk0ZqPXXi1_QDbfqQhGHu+wUwzyS6WmfkUZ1HiXA@mail.gmail.com/
* tag 'bcachefs-2024-06-12' of https://evilpiepirate.org/git/bcachefs:
bcachefs: Fix rcu_read_lock() leak in drop_extra_replicas
bcachefs: Add missing bch_inode_info.ei_flags init
bcachefs: Add missing synchronize_srcu_expedited() call when shutting down
bcachefs: Check for invalid bucket from bucket_gen(), gc_bucket()
bcachefs: Replace bucket_valid() asserts in bucket lookup with proper checks
bcachefs: Fix snapshot_create_lock lock ordering
bcachefs: Fix refcount leak in check_fix_ptrs()
bcachefs: Leave a buffer in the btree key cache to avoid lock thrashing
bcachefs: Fix reporting of freed objects from key cache shrinker
bcachefs: set sb->s_shrinker->seeks = 0
bcachefs: increase key cache shrinker batch size
bcachefs: Enable automatic shrinking for rhashtables
bcachefs: fix the display format for show-super
bcachefs: fix stack frame size in fsck.c
bcachefs: Delete incorrect BTREE_ID_NR assertion
bcachefs: Fix incorrect error handling found_btree_node_is_readable()
bcachefs: Split out btree_write_submit_wq
Sean Anderson [Tue, 11 Jun 2024 15:41:16 +0000 (11:41 -0400)]
net: xilinx: axienet: Use NL_SET_ERR_MSG instead of netdev_err
This error message can be triggered by userspace. Use NL_SET_ERR_MSG so
the message is returned to the user and to avoid polluting the kernel
logs. Additionally, change the return value from EFAULT to EBUSY to
better reflect the error (which has nothing to do with addressing).
====================
net: flow dissector: allow explicit passing of netns
Change since last version:
fix kdoc comment warning reported by kbuild robot, no other changes,
thus retaining RvB tags from Eric and Willem.
v1: https://lore.kernel.org/netdev/20240607083205.3000-1-fw@strlen.de/
Years ago flow dissector gained ability to delegate flow dissection
to a bpf program, scoped per netns.
The netns is derived from skb->dev, and if that is not available, from
skb->sk. If neither is set, we hit a (benign) WARN_ON_ONCE().
This WARN_ON_ONCE can be triggered from netfilter.
Known skb origins are nf_send_reset and ipv4 stack generated IGMP
messages.
Lets allow callers to pass the current netns explicitly and make
nf_tables use those instead.
This targets net-next instead of net because the WARN is benign and this
is not a regression.
====================
Florian Westphal [Sat, 8 Jun 2024 22:10:40 +0000 (00:10 +0200)]
net: add and use __skb_get_hash_symmetric_net
Similar to previous patch: apply same logic for
__skb_get_hash_symmetric and let callers pass the netns to the dissector
core.
Existing function is turned into a wrapper to avoid adjusting all
callers, nft_hash.c uses new function.
Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240608221057.16070-3-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal [Sat, 8 Jun 2024 22:10:39 +0000 (00:10 +0200)]
net: add and use skb_get_hash_net
Years ago flow dissector gained ability to delegate flow dissection
to a bpf program, scoped per netns.
Unfortunately, skb_get_hash() only gets an sk_buff argument instead
of both net+skb. This means the flow dissector needs to obtain the
netns pointer from somewhere else.
The netns is derived from skb->dev, and if that is not available, from
skb->sk. If neither is set, we hit a (benign) WARN_ON_ONCE().
Trying both dev and sk covers most cases, but not all, as recently
reported by Christoph Paasch.
In case of nf-generated tcp reset, both sk and dev are NULL:
syzkaller did something like this:
table inet filter {
chain input {
type filter hook input priority filter; policy accept;
meta nftrace set 1
tcp dport 42 reject with tcp reset
}
chain output {
type filter hook output priority filter; policy accept;
# empty chain is enough
}
}
... then sends a tcp packet to port 42.
Initial attempt to simply set skb->dev from nf_reject_ipv4 doesn't cover
all cases: skbs generated via ipv4 igmp_send_report trigger similar splat.
Moreover, Pablo Neira found that nft_hash.c uses __skb_get_hash_symmetric()
which would trigger same warn splat for such skbs.
Lets allow callers to pass the current netns explicitly.
The nf_trace infrastructure is adjusted to use the new helper.
__skb_get_hash_symmetric is handled in the next patch.
Reported-by: Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/494 Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240608221057.16070-2-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shradha Gupta [Mon, 10 Jun 2024 10:28:39 +0000 (03:28 -0700)]
net: mana: Allow variable size indirection table
Allow variable size indirection table allocation in MANA instead
of using a constant value MANA_INDIRECT_TABLE_SIZE.
The size is now derived from the MANA_QUERY_VPORT_CONFIG and the
indirection table is allocated dynamically.
David S. Miller [Wed, 12 Jun 2024 05:39:04 +0000 (06:39 +0100)]
Merge branch 'tcp-ao-md5-racepoits'
Dmitry Safonov says:
====================
net/tcp: TCP-AO and TCP-MD5 tracepoints
Changes in v2:
- Fix the build with CONFIG_IPV6=m (Eric Dumazet)
- Move unused keyid/rnext/maclen later in the series to the patch
that uses them (Simon Horman)
- Reworked tcp_ao selftest lib to allow async tracing non-tcp events
(was working on a stress-test that needs trace_kfree_skb() event,
not in this series).
- Separated selftest changes from kernel, as they now have a couple
of unrelated to tracepoints changes
- Wrote a few lines of Documentation/
- Link to v1: https://lore.kernel.org/r/20240224-tcp-ao-tracepoints-v1-0-15f31b7f30a7@arista.com
====================
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Safonov [Thu, 6 Jun 2024 23:25:59 +0000 (00:25 +0100)]
net/tcp: Remove tcp_hash_fail()
Now there are tracepoints, that cover all functionality of
tcp_hash_fail(), but also wire up missing places
They are also faster, can be disabled and provide filtering.
This potentially may create a regression if a userspace depends on dmesg
logs. Fingers crossed, let's see if anyone complains in reality.
Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Safonov [Thu, 6 Jun 2024 23:25:58 +0000 (00:25 +0100)]
net/tcp: Add tcp-md5 and tcp-ao tracepoints
Instead of forcing userspace to parse dmesg (that's what currently is
happening, at least in codebase of my current company), provide a better
way, that can be enabled/disabled in runtime.
Currently, there are already tcp events, add hashing related ones there,
too. Rasdaemon currently exercises net_dev_xmit_timeout,
devlink_health_report, but it'll be trivial to teach it to deal with
failed hashes. Otherwise, BGP may trace/log them itself. Especially
exciting for possible investigations is key rotation (RNext_key
requests).
Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Safonov [Thu, 6 Jun 2024 23:25:57 +0000 (00:25 +0100)]
net/tcp: Move tcp_inbound_hash() from headers
Two reasons:
1. It's grown up enough
2. In order to not do header spaghetti by including
<trace/events/tcp.h>, which is necessary for TCP tracepoints.
While at it, unexport and make static tcp_inbound_ao_hash().
Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Safonov [Thu, 6 Jun 2024 23:25:56 +0000 (00:25 +0100)]
net/tcp: Add a helper tcp_ao_hdr_maclen()
It's going to be used more in TCP-AO tracepoints.
Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Safonov [Thu, 6 Jun 2024 23:25:55 +0000 (00:25 +0100)]
net/tcp: Use static_branch_tcp_{md5,ao} to drop ifdefs
It's possible to clean-up some ifdefs by hiding that
tcp_{md5,ao}_needed static branch is defined and compiled only
under related configs, since commit 4c8530dc7d7d ("net/tcp: Only produce
AO/MD5 logs if there are any keys").
Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xiaolei Wang [Sat, 8 Jun 2024 14:35:24 +0000 (22:35 +0800)]
net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters
The current cbs parameter depends on speed after uplinking,
which is not needed and will report a configuration error
if the port is not initially connected. The UAPI exposed by
tc-cbs requires userspace to recalculate the send slope anyway,
because the formula depends on port_transmit_rate (see man tc-cbs),
which is not an invariant from tc's perspective. Therefore, we
use offload->sendslope and offload->idleslope to derive the
original port_transmit_rate from the CBS formula.
Fixes: 1f705bc61aee ("net: stmmac: Add support for CBS QDISC") Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20240608143524.2065736-1-xiaolei.wang@windriver.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Joshua Washington [Mon, 10 Jun 2024 22:57:18 +0000 (15:57 -0700)]
gve: ignore nonrelevant GSO type bits when processing TSO headers
TSO currently fails when the skb's gso_type field has more than one bit
set.
TSO packets can be passed from userspace using PF_PACKET, TUNTAP and a
few others, using virtio_net_hdr (e.g., PACKET_VNET_HDR). This includes
virtualization, such as QEMU, a real use-case.
The gso_type and gso_size fields as passed from userspace in
virtio_net_hdr are not trusted blindly by the kernel. It adds gso_type
|= SKB_GSO_DODGY to force the packet to enter the software GSO stack
for verification.
This issue might similarly come up when the CWR bit is set in the TCP
header for congestion control, causing the SKB_GSO_TCP_ECN gso_type bit
to be set.
Fixes: a57e5de476be ("gve: DQO: Add TX path") Signed-off-by: Joshua Washington <joshwash@google.com> Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Suggested-by: Eric Dumazet <edumazet@google.com> Acked-by: Andrei Vagin <avagin@gmail.com>
v2 - Remove unnecessary comments, remove line break between fixes tag
and signoffs.
Jakub Kicinski [Wed, 12 Jun 2024 02:40:27 +0000 (19:40 -0700)]
Merge tag 'for-net-2024-06-10' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_sync: fix not using correct handle
- L2CAP: fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ
- L2CAP: fix connection setup in l2cap_connect
* tag 'for-net-2024-06-10' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: fix connection setup in l2cap_connect
Bluetooth: L2CAP: Fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ
Bluetooth: hci_sync: Fix not using correct handle
====================
Geliang Tang [Fri, 7 Jun 2024 16:31:07 +0000 (18:31 +0200)]
selftests: mptcp: lib: use wait_local_port_listen helper
This patch includes net_helper.sh into mptcp_lib.sh, uses the helper
wait_local_port_listen() defined in it to implement the similar mptcp
helper. This can drop some duplicate code.
It looks like this helper from net_helper.sh was originally coming from
MPTCP, but MPTCP selftests have not been updated to use it from this
shared place.
Geliang Tang [Fri, 7 Jun 2024 16:31:06 +0000 (18:31 +0200)]
selftests: mptcp: lib: use setup/cleanup_ns helpers
This patch includes lib.sh into mptcp_lib.sh, uses setup_ns helper
defined in lib.sh to set up namespaces in mptcp_lib_ns_init(), and
uses cleanup_ns to delete namespaces in mptcp_lib_ns_exit().
Geliang Tang [Fri, 7 Jun 2024 16:31:05 +0000 (18:31 +0200)]
selftests: net: lib: remove 'ns' var in setup_ns
The helper setup_ns() doesn't work when a net namespace named "ns" is
passed to it.
For example, in net/mptcp/diag.sh, the name of the namespace is "ns". If
"setup_ns ns" is used in it, diag.sh fails with errors:
Invalid netns name "./mptcp_connect"
Cannot open network namespace "10000": No such file or directory
Cannot open network namespace "10000": No such file or directory
That is because "ns" is also a local variable in setup_ns, and it will
not set the value for the global variable that has been giving in
argument. To solve this, we could rename the variable, but it sounds
better to drop it, as we can resolve the name using the variable passed
in argument instead.
The other local variables -- "ns_list" and "ns_name" -- are more
unlikely to conflict with existing global variables. They don't seem to
be currently used in any other net selftests.
selftests: net: lib: do not set ns var as readonly
It sounds good to mark the global netns variable as 'readonly', but Bash
doesn't allow the creation of local variables with the same name.
Because it looks like 'readonly' is mainly used here to check if a netns
with that name has already been set, it sounds fine to check if a
variable with this name has already been set instead. By doing that, we
avoid having to modify helpers from MPTCP selftests using the same
variable name as the one used to store the created netns name.
While at it, also avoid an unnecessary call to 'eval' to set a local
variable.
====================
net: core: Unify dstats with tstats and lstats, implement generic dstats collection
The struct pcpu_dstats ("dstats") has a few variations from the other
two stats types (struct pcpu_sw_netstats and struct pcpu_lstats), and
doesn't have generic helpers for collecting the per-cpu stats into a
struct rtnl_link_stats64.
This change unifies dstats with the other types, adds a collection
implementation to the core, and updates the single driver (vrf) to use
this generic implementation.
Of course, questions/comments/etc are most welcome!
Jeremy Kerr [Fri, 7 Jun 2024 10:25:26 +0000 (18:25 +0800)]
net: vrf: move to generic dstat helpers
The vrf driver has its own dstats-to-rtnl_link_stats64 collection, but
we now have a generic implementation for dstats collection, so switch to
this.
In doing so, we fix a minor issue where the (non-percpu)
dev->stats->tx_errors value was never collected into rtnl_link_stats64,
as the generic dev_get_dstats64() consumes the starting values from
dev->stats.
We currently have dev_get_tstats64() for collecting per-cpu stats of
type pcpu_sw_netstats ("tstats"). However, tstats doesn't allow for
accounting tx/rx drops. We do have a stats variant that does have stats
for dropped packets: struct pcpu_dstats, but there are no core helpers
for using those stats.
The VRF driver uses dstats, by providing its own collation/fetch
functions to do so.
This change adds a common implementation for dstats-type collection,
used when pcpu_stat_type == NETDEV_PCPU_STAT_DSTAT. This is based on the
VRF driver's existing stats collator (plus the unused tx_drops stat from
there). We will switch the VRF driver to use this in the next change.
Breno Leitao [Fri, 7 Jun 2024 08:44:19 +0000 (01:44 -0700)]
ip_tunnel: Move stats allocation to core
With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core instead
of this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Move ip_tunnel driver to leverage the core allocation.
All the ip_tunnel_init() users call ip_tunnel_init() as part of their
.ndo_init callback. The .ndo_init callback is called before the stats
allocation in netdev_register(), thus, the allocation will happen before
the netdev is visible.
Linus Torvalds [Tue, 11 Jun 2024 19:04:21 +0000 (12:04 -0700)]
Merge tag 'vfs-6.10-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"Misc:
- Restore debugfs behavior of ignoring unknown mount options
- Fix kernel doc for netfs_wait_for_oustanding_io()
- Fix struct statx comment after new addition for this cycle
- Fix a check in find_next_fd()
iomap:
- Fix data zeroing behavior when an extent spans the block that
contains i_size
- Restore i_size increasing in iomap_write_end() for now to avoid
stale data exposure on xfs with a realtime device
Cachefiles:
- Remove unneeded fdtable.h include
- Improve trace output for cachefiles_obj_{get,put}_ondemand_fd()
- Remove requests from the request list to prevent accessing already
freed requests
- Fix UAF when issuing restore command while the daemon is still
alive by adding an additional reference count to requests
- Fix UAF by grabbing a reference during xarray lookup with xa_lock()
held
- Simplify error handling in cachefiles_ondemand_daemon_read()
- Add consistency checks read and open requests to avoid crashes
- Add a spinlock to protect ondemand_id variable which is used to
determine whether an anonymous cachefiles fd has already been
closed
- Make on-demand reads killable allowing to handle broken cachefiles
daemon better
- Flush all requests after the kernel has been marked dead via
CACHEFILES_DEAD to avoid hung-tasks
- Ensure that closed requests are marked as such to avoid reusing
them with a reopen request
- Defer fd_install() until after copy_to_user() succeeded and thereby
get rid of having to use close_fd()
- Ensure that anonymous cachefiles on-demand fds are reused while
they are valid to avoid pinning already freed cookies"
* tag 'vfs-6.10-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: Fix iomap_adjust_read_range for plen calculation
iomap: keep on increasing i_size in iomap_write_end()
cachefiles: remove unneeded include of <linux/fdtable.h>
fs/file: fix the check in find_next_fd()
cachefiles: make on-demand read killable
cachefiles: flush all requests after setting CACHEFILES_DEAD
cachefiles: Set object to close if ondemand_id < 0 in copen
cachefiles: defer exposing anon_fd until after copy_to_user() succeeds
cachefiles: never get a new anonymous fd if ondemand_id is valid
cachefiles: add spin_lock for cachefiles_ondemand_info
cachefiles: add consistency check for copen/cread
cachefiles: remove err_put_fd label in cachefiles_ondemand_daemon_read()
cachefiles: fix slab-use-after-free in cachefiles_ondemand_daemon_read()
cachefiles: fix slab-use-after-free in cachefiles_ondemand_get_fd()
cachefiles: remove requests from xarray during flushing requests
cachefiles: add output string to cachefiles_obj_[get|put]_ondemand_fd
statx: Update offset commentary for struct statx
netfs: fix kernel doc for nets_wait_for_outstanding_io()
debugfs: continue to ignore unknown mount options
Florian Westphal [Thu, 6 Jun 2024 10:23:31 +0000 (12:23 +0200)]
netfilter: Use flowlabel flow key when re-routing mangled packets
'ip6 dscp set $v' in an nftables outpute route chain has no effect.
While nftables does detect the dscp change and calls the reroute hook.
But ip6_route_me_harder never sets the dscp/flowlabel:
flowlabel/dsfield routing rules are ignored and no reroute takes place.
Thanks to Yi Chen for an excellent reproducer script that I used
to validate this change.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Yi Chen <yiche@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Jozsef Kadlecsik [Tue, 4 Jun 2024 13:58:03 +0000 (15:58 +0200)]
netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type
Lion Ackermann reported that there is a race condition between namespace cleanup
in ipset and the garbage collection of the list:set type. The namespace
cleanup can destroy the list:set type of sets while the gc of the set type is
waiting to run in rcu cleanup. The latter uses data from the destroyed set which
thus leads use after free. The patch contains the following parts:
- When destroying all sets, first remove the garbage collectors, then wait
if needed and then destroy the sets.
- Fix the badly ordered "wait then remove gc" for the destroy a single set
case.
- Fix the missing rcu locking in the list:set type in the userspace test
case.
- Use proper RCU list handlings in the list:set type.
The patch depends on c1193d9bbbd3 (netfilter: ipset: Add list flush to cancel_gc).
Davide Ornaghi [Wed, 5 Jun 2024 11:03:45 +0000 (13:03 +0200)]
netfilter: nft_inner: validate mandatory meta and payload
Check for mandatory netlink attributes in payload and meta expression
when used embedded from the inner expression, otherwise NULL pointer
dereference is possible from userspace.
Fixes: a150d122b6bd ("netfilter: nft_meta: add inner match support") Fixes: 3a07327d10a0 ("netfilter: nft_inner: support for inner tunnel header matching") Signed-off-by: Davide Ornaghi <d.ornaghi97@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
====================
Intel Wired LAN Driver Updates 2024-06-03
This series includes miscellaneous improvements for the ice as well as a
cleanup to the Makefiles for all Intel net drivers.
Andy fixes all of the Intel net driver Makefiles to use the documented
'*-y' syntax for specifying object files to link into kernel driver
modules, rather than the '*-objs' syntax which works but is documented as
reserved for user-space host programs.
Jacob has a cleanup to refactor rounding logic in the ice driver into a
common roundup_u64 helper function.
Michal Schmidt replaces irq_set_affinity_hint() to use
irq_update_affinity_hint() which behaves better with user-applied affinity
settings.
Michal Schmidt [Fri, 7 Jun 2024 21:22:34 +0000 (14:22 -0700)]
ice: use irq_update_affinity_hint()
irq_set_affinity_hint() is deprecated. Use irq_update_affinity_hint()
instead. This removes the side-effect of actually applying the affinity.
The driver does not really need to worry about spreading its IRQs across
CPUs. The core code already takes care of that.
On the contrary, when the driver applies affinities by itself, it breaks
the users' expectations:
1. The user configures irqbalance with IRQBALANCE_BANNED_CPULIST in
order to prevent IRQs from being moved to certain CPUs that run a
real-time workload.
2. ice reconfigures VSIs at runtime due to a MIB change
(ice_dcb_process_lldp_set_mib_change). Reopening a VSI resets the
affinity in ice_vsi_req_irq_msix().
3. ice has no idea about irqbalance's config, so it may move an IRQ to
a banned CPU. The real-time workload suffers unacceptable latency.
I am not sure if updating the affinity hints is at all useful, because
irqbalance ignores them since 2016 ([1]), but at least it's harmless.
This ice change is similar to i40e commit d34c54d1739c ("i40e: Use
irq_update_affinity_hint()").
Jacob Keller [Fri, 7 Jun 2024 21:22:33 +0000 (14:22 -0700)]
ice: add and use roundup_u64 instead of open coding equivalent
In ice_ptp_cfg_clkout(), the ice driver needs to calculate the nearest next
second of a current time value specified in nanoseconds. It implements this
using div64_u64, because the time value is a u64. It could use div_u64
since NSEC_PER_SEC is smaller than 32-bits.
Ideally this would be implemented directly with roundup(), but that can't
work on all platforms due to a division which requires using the specific
macros and functions due to platform restrictions, and to ensure that the
most appropriate and fast instructions are used.
The kernel doesn't currently provide any 64-bit equivalents for doing
roundup. Attempting to use roundup() on a 32-bit platform will result in a
link failure due to not having a direct 64-bit division.
The closest equivalent for this is DIV64_U64_ROUND_UP, which does a
division always rounding up. However, this only computes the division, and
forces use of the div64_u64 in cases where the divisor is a 32bit value and
could make use of div_u64.
Introduce DIV_U64_ROUND_UP based on div_u64, and then use it to implement
roundup_u64 which takes a u64 input value and a u32 rounding value.
The name roundup_u64 matches the naming scheme of div_u64, and future
patches could implement roundup64_u64 if they need to round by a multiple
that is greater than 32-bits.
Replace the logic in ice_ptp.c which does this equivalent with the newly
added roundup_u64.
Andy Shevchenko [Fri, 7 Jun 2024 21:22:32 +0000 (14:22 -0700)]
net: intel: Use *-y instead of *-objs in Makefile
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-1-d1470cee3347@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Fri, 7 Jun 2024 12:56:52 +0000 (12:56 +0000)]
tcp: use signed arithmetic in tcp_rtx_probe0_timed_out()
Due to timer wheel implementation, a timer will usually fire
after its schedule.
For instance, for HZ=1000, a timeout between 512ms and 4s
has a granularity of 64ms.
For this range of values, the extra delay could be up to 63ms.
For TCP, this means that tp->rcv_tstamp may be after
inet_csk(sk)->icsk_timeout whenever the timer interrupt
finally triggers, if one packet came during the extra delay.
We need to make sure tcp_rtx_probe0_timed_out() handles this case.
Fixes: e89688e3e978 ("net: tcp: fix unexcepted socket die when snd_wnd is 0") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Menglong Dong <imagedong@tencent.com> Acked-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Link: https://lore.kernel.org/r/20240607125652.1472540-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 11 Jun 2024 02:49:13 +0000 (19:49 -0700)]
Merge branch 'mptcp-various-fixes'
Matthieu Baerts says:
====================
mptcp: various fixes
The different patches here are some unrelated fixes for MPTCP:
- Patch 1 ensures 'snd_una' is initialised on connect in case of MPTCP
fallback to TCP followed by retransmissions before the processing of
any other incoming packets. A fix for v5.9+.
- Patch 2 makes sure the RmAddr MIB counter is incremented, and only
once per ID, upon the reception of a RM_ADDR. A fix for v5.10+.
- Patch 3 doesn't update 'add addr' related counters if the connect()
was not possible. A fix for v5.7+.
- Patch 4 updates the mailmap file to add Geliang's new email address.
====================
Geliang Tang [Fri, 7 Jun 2024 15:01:51 +0000 (17:01 +0200)]
mailmap: map Geliang's new email address
Just like my other email addresses, map my new one to kernel.org
account too.
My new email address uses "last name, first name" format, which is
different from my other email addresses. This mailmap is also used
to indicate that it is actually the same person.
YonglongLi [Fri, 7 Jun 2024 15:01:50 +0000 (17:01 +0200)]
mptcp: pm: update add_addr counters after connect
The creation of new subflows can fail for different reasons. If no
subflow have been created using the received ADD_ADDR, the related
counters should not be updated, otherwise they will never be decremented
for events related to this ID later on.
For the moment, the number of accepted ADD_ADDR is only decremented upon
the reception of a related RM_ADDR, and only if the remote address ID is
currently being used by at least one subflow. In other words, if no
subflow can be created with the received address, the counter will not
be decremented. In this case, it is then important not to increment
pm.add_addr_accepted counter, and not to modify pm.accept_addr bit.
Note that this patch does not modify the behaviour in case of failures
later on, e.g. if the MP Join is dropped or rejected.
The "remove invalid addresses" MP Join subtest has been modified to
validate this case. The broadcast IP address is added before the "valid"
address that will be used to successfully create a subflow, and the
limit is decreased by one: without this patch, it was not possible to
create the last subflow, because:
- the broadcast address would have been accepted even if it was not
usable: the creation of a subflow to this address results in an error,
- the limit of 2 accepted ADD_ADDR would have then been reached.
YonglongLi [Fri, 7 Jun 2024 15:01:49 +0000 (17:01 +0200)]
mptcp: pm: inc RmAddr MIB counter once per RM_ADDR ID
The RmAddr MIB counter is supposed to be incremented once when a valid
RM_ADDR has been received. Before this patch, it could have been
incremented as many times as the number of subflows connected to the
linked address ID, so it could have been 0, 1 or more than 1.
The "RmSubflow" is incremented after a local operation. In this case,
it is normal to tied it with the number of subflows that have been
actually removed.
The "remove invalid addresses" MP Join subtest has been modified to
validate this case. A broadcast IP address is now used instead: the
client will not be able to create a subflow to this address. The
consequence is that when receiving the RM_ADDR with the ID attached to
this broadcast IP address, no subflow linked to this ID will be found.
Paolo Abeni [Fri, 7 Jun 2024 15:01:48 +0000 (17:01 +0200)]
mptcp: ensure snd_una is properly initialized on connect
This is strictly related to commit fb7a0d334894 ("mptcp: ensure snd_nxt
is properly initialized on connect"). It turns out that syzkaller can
trigger the retransmit after fallback and before processing any other
incoming packet - so that snd_una is still left uninitialized.
Address the issue explicitly initializing snd_una together with snd_nxt
and write_seq.
Suggested-by: Mat Martineau <martineau@kernel.org> Fixes: 8fd738049ac3 ("mptcp: fallback in case of simultaneous connect") Cc: stable@vger.kernel.org Reported-by: Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/485 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-1-1ab9ddfa3d00@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Johannes Berg [Fri, 7 Jun 2024 15:53:32 +0000 (17:53 +0200)]
net/sched: initialize noop_qdisc owner
When the noop_qdisc owner isn't initialized, then it will be 0,
so packets will erroneously be regarded as having been subject
to recursion as long as only CPU 0 queues them. For non-SMP,
that's all packets, of course. This causes a change in what's
reported to userspace, normally noop_qdisc would drop packets
silently, but with this change the syscall returns -ENOBUFS if
RECVERR is also set on the socket.
Fix this by initializing the owner field to -1, just like it
would be for dynamically allocated qdiscs by qdisc_alloc().
We've added 54 non-merge commits during the last 10 day(s) which contain
a total of 50 files changed, 1887 insertions(+), 527 deletions(-).
The main changes are:
1) Add a user space notification mechanism via epoll when a struct_ops
object is getting detached/unregistered, from Kui-Feng Lee.
2) Big batch of BPF selftest refactoring for sockmap and BPF congctl
tests, from Geliang Tang.
3) Add BTF field (type and string fields, right now) iterator support
to libbpf instead of using existing callback-based approaches,
from Andrii Nakryiko.
4) Extend BPF selftests for the latter with a new btf_field_iter
selftest, from Alan Maguire.
5) Add new kfuncs for a generic, open-coded bits iterator,
from Yafang Shao.
6) Fix BPF selftests' kallsyms_find() helper under kernels configured
with CONFIG_LTO_CLANG_THIN, from Yonghong Song.
7) Remove a bunch of unused structs in BPF selftests,
from David Alan Gilbert.
8) Convert test_sockmap section names into names understood by libbpf
so it can deduce program type and attach type, from Jakub Sitnicki.
9) Extend libbpf with the ability to configure log verbosity
via LIBBPF_LOG_LEVEL environment variable, from Mykyta Yatsenko.
10) Fix BPF selftests with regards to bpf_cookie and find_vma flakiness
in nested VMs, from Song Liu.
11) Extend riscv32/64 JITs to introduce shift/add helpers to generate Zba
optimization, from Xiao Wang.
12) Enable BPF programs to declare arrays and struct fields with kptr,
bpf_rb_root, and bpf_list_head, from Kui-Feng Lee.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits)
selftests/bpf: Drop useless arguments of do_test in bpf_tcp_ca
selftests/bpf: Use start_test in test_dctcp in bpf_tcp_ca
selftests/bpf: Use start_test in test_dctcp_fallback in bpf_tcp_ca
selftests/bpf: Add start_test helper in bpf_tcp_ca
selftests/bpf: Use connect_to_fd_opts in do_test in bpf_tcp_ca
libbpf: Auto-attach struct_ops BPF maps in BPF skeleton
selftests/bpf: Add btf_field_iter selftests
selftests/bpf: Fix send_signal test with nested CONFIG_PARAVIRT
libbpf: Remove callback-based type/string BTF field visitor helpers
bpftool: Use BTF field iterator in btfgen
libbpf: Make use of BTF field iterator in BTF handling code
libbpf: Make use of BTF field iterator in BPF linker code
libbpf: Add BTF field iterator
selftests/bpf: Ignore .llvm.<hash> suffix in kallsyms_find()
selftests/bpf: Fix bpf_cookie and find_vma in nested VM
selftests/bpf: Test global bpf_list_head arrays.
selftests/bpf: Test global bpf_rb_root arrays and fields in nested struct types.
selftests/bpf: Test kptr arrays and kptrs in nested struct fields.
bpf: limit the number of levels of a nested struct type.
bpf: look into the types of the fields of a struct type recursively.
...
====================
Jakub Kicinski [Tue, 11 Jun 2024 00:40:25 +0000 (17:40 -0700)]
Merge tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.11
The first "new features" pull request for v6.11 with changes both in
stack and in drivers. Nothing out of ordinary, except that we have
two conflicts this time:
cfg80211/mac80211
* parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers
wilc1000
* read MAC address during probe to make it visible to user space
iwlwifi
* bump FW API to 91 for BZ/SC devices
* report 64-bit radiotap timestamp
* enable P2P low latency by default
* handle Transmit Power Envelope (TPE) advertised by AP
* start using guard()
rtlwifi
* RTL8192DU support
ath12k
* remove unsupported tx monitor handling
* channel 2 in 6 GHz band support
* Spatial Multiplexing Power Save (SMPS) in 6 GHz band support
* multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA)
support
* dynamic VLAN support
* add panic handler for resetting the firmware state
ath10k
* add qcom,no-msa-ready-indicator Device Tree property
* LED support for various chipsets
* tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits)
wifi: ath12k: add hw_link_id in ath12k_pdev
wifi: ath12k: add panic handler
wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity()
wifi: brcm80211: remove unused structs
wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type)
wifi: ath12k: do not process consecutive RDDM event
dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example
wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup()
wifi: rtlwifi: handle return value of usb init TX/RX
wifi: rtlwifi: Enable the new rtl8192du driver
wifi: rtlwifi: Add rtl8192du/sw.c
wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg
wifi: rtlwifi: Add rtl8192du/dm.{c,h}
wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h}
wifi: rtlwifi: Add rtl8192du/rf.{c,h}
wifi: rtlwifi: Add rtl8192du/trx.{c,h}
wifi: rtlwifi: Add rtl8192du/phy.{c,h}
wifi: rtlwifi: Add rtl8192du/hw.{c,h}
wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU
wifi: rtlwifi: Add rtl8192du/table.{c,h}
...
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Kent Overstreet [Sat, 8 Jun 2024 21:36:24 +0000 (17:36 -0400)]
bcachefs: Add missing synchronize_srcu_expedited() call when shutting down
We use the polling interface to srcu for tracking pending frees; when
shutting down we don't need to wait for an srcu barrier to free them,
but SRCU still gets confused if we shutdown with an outstanding grace
period.
Reported-by: syzbot+6a038377f0a594d7d44e@syzkaller.appspotmail.com Reported-by: syzbot+0ece6edfd05ed20e32d9@syzkaller.appspotmail.com Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
projects / users / jedix / linux-maple.git / log