Dr. David Alan Gilbert [Thu, 8 May 2025 00:02:25 +0000 (01:02 +0100)]
ALSA: gus: Remove deadcode
snd_gus_use_dec(), snd_gus_use_inc() and snd_gf1_print_voice_registers()
last uses were removed in 2007 by
commit e5723b41abe5 ("[ALSA] Remove sequencer instrument layer")
Remove them.
While there, remove big #if 0 blocks next to the code being deleted.
snd_hdac_stream_get_spbmaxfifo() was originally added in 2015
in commit ee8bc4df1b5a ("ALSA: hdac: Add support to enable SPIB for hdac
ext stream")
when it was originally called snd_hdac_ext_stream_set_spbmaxfifo,
it was renamed snd_hdac_ext_stream_get_spbmaxfifo shortly after
and was finally renamed to snd_hdac_stream_get_spbmaxfifo in 2022.
But it was never used.
The last use of snd_seq_queue_client_leave_cells() was removed in 2018
by
commit 85d59b57be59 ("ALSA: seq: Remove superfluous
snd_seq_queue_client_leave_cells() call")
The last use of snd_pcm_rate_range_to_bits() was removed in 2016 by
commit b6b6e4d670c9 ("ASoC: topology: Fix setting of stream rates, rate_min
and rate_max")
ALSA: hda/tas2781: Remove tas2781_spi_fwlib.c and leverage SND_SOC_TAS2781_FMWLIB
Most codes in tas2781_spi_fwlib.c are same as tas2781-fmwlib.c, mainly for
firmware parsing, only differece is the register reading, bit update and
book switching in i2c and spi. The main purpose of this patch is for code
cleaup and arrange the shared part for i2c and spi.
Richard Fitzgerald [Mon, 28 Apr 2025 09:41:26 +0000 (10:41 +0100)]
ALSA: hda/cs35l56: Remove dependency on COMPILE_TEST
Change the Kconfig dependency on ACPI || COMPILE_TEST to only depend on
ACPI.
The alternate dependency on COMPILE_TEST was a fudge to enable building
KUnit tests for modules that are selected by the CS35L56 driver but don't
depend on ACPI. This was based on a misunderstanding that KUNIT_ALL_TESTS
meant "all tests". Actually KUNIT_ALL_TESTS only means "tests for modules
that have satisfied dependencies" so it shouldn't be overriding
dependencies.
ALSA: korg1212: Replace the pending stop check code with sync_stop PCM ops
The korg1212 driver has an overly complex code with the timer API to
check the pending stop operation and to sync at the prepare stage.
This very same thing can be achieved more simply by the PCM sync_stop
ops without timer, and this patch implements it.
Along with the rewrite to sync_stop ops, the flag
dsp_stop_is_processed is replaced with dsp_stop_processing to indicate
the stop operation is pending, not to indicate it's finished. In that
way, wait_for_event() can be used more straightforwardly.
The cs35l56_hda driver now doesn't use hda_cs_dsp_ctl at all. The
cs35l41_hda driver only uses the small array of firmware names and the
function to read a control value. All other functions and data in
hda_cs_dsp_ctl are unused. There is no need to keep a separate module
for such a small amount of data and code that is only used by one driver,
so remove the whole module.
Philipp Stanner [Wed, 23 Apr 2025 07:53:46 +0000 (09:53 +0200)]
ALSA: maestro3: Use pure devres PCI
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Philipp Stanner [Wed, 23 Apr 2025 07:53:45 +0000 (09:53 +0200)]
ALSA: ali5451: Use pure devres PCI
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Philipp Stanner [Wed, 23 Apr 2025 07:53:44 +0000 (09:53 +0200)]
ALSA: ca0106: Use pure devres PCI
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Philipp Stanner [Wed, 23 Apr 2025 07:53:43 +0000 (09:53 +0200)]
ALSA: cs46xx: Use pure devres PCI
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Philipp Stanner [Wed, 23 Apr 2025 07:53:42 +0000 (09:53 +0200)]
ALSA: cs5535: Use pure devres PCI
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Philipp Stanner [Wed, 23 Apr 2025 07:53:41 +0000 (09:53 +0200)]
ALSA: echoaudio: Use pure devres PCI
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Philipp Stanner [Wed, 23 Apr 2025 07:53:40 +0000 (09:53 +0200)]
ALSA: emu10k1: Use pure devres PCI
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Philipp Stanner [Wed, 23 Apr 2025 07:53:39 +0000 (09:53 +0200)]
ALSA: ice: Use pure devres PCI
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Philipp Stanner [Wed, 23 Apr 2025 07:53:38 +0000 (09:53 +0200)]
ALSA: nm256: Use pure devres PCI
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Philipp Stanner [Wed, 23 Apr 2025 07:53:37 +0000 (09:53 +0200)]
ALSA: riptide: Use pure devres PCI
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Philipp Stanner [Wed, 23 Apr 2025 07:53:36 +0000 (09:53 +0200)]
ALSA: ymfpci: Use pure devres PCI
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Philipp Stanner [Wed, 23 Apr 2025 07:53:35 +0000 (09:53 +0200)]
ALSA: rme9652: Use pure devres PCI
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Philipp Stanner [Wed, 23 Apr 2025 07:53:34 +0000 (09:53 +0200)]
ALSA: trident: Use pure devres PCI
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
In addition, the request function's name parameter should describe the
driver, not the device.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Philipp Stanner [Wed, 23 Apr 2025 07:53:33 +0000 (09:53 +0200)]
ALSA: vx222: Use pure devres PCI
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Pass the driver's name as the name parameter of
pcim_request_all_regions().
Philipp Stanner [Wed, 23 Apr 2025 07:53:32 +0000 (09:53 +0200)]
ALSA: lx6464es: Use pure devres PCI
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Philipp Stanner [Wed, 23 Apr 2025 07:53:31 +0000 (09:53 +0200)]
ALSA: oxygen: Use pure devres PCI
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Philipp Stanner [Wed, 23 Apr 2025 07:53:30 +0000 (09:53 +0200)]
ALSA: als: Use pure devres PCI
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Philipp Stanner [Wed, 23 Apr 2025 07:53:29 +0000 (09:53 +0200)]
ALSA: azt3328: Use pure devres PCI
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Philipp Stanner [Wed, 23 Apr 2025 07:53:28 +0000 (09:53 +0200)]
ALSA: es19x8: Use pure devres PCI
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Philipp Stanner [Wed, 23 Apr 2025 07:53:27 +0000 (09:53 +0200)]
ALSA: fm801: Use pure devres PCI
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Philipp Stanner [Wed, 23 Apr 2025 07:53:26 +0000 (09:53 +0200)]
ALSA: intel8x: Use pure devres PCI
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Philipp Stanner [Wed, 23 Apr 2025 07:53:25 +0000 (09:53 +0200)]
ALSA: sis7019: Use pure devres PCI
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Philipp Stanner [Wed, 23 Apr 2025 07:53:24 +0000 (09:53 +0200)]
ALSA: via82: Use pure devres PCI
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Philipp Stanner [Wed, 23 Apr 2025 07:53:23 +0000 (09:53 +0200)]
ALSA: cmipci: Use pure devres PCI
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Philipp Stanner [Wed, 23 Apr 2025 07:53:22 +0000 (09:53 +0200)]
ALSA: ens1370: Use pure devres PCI
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Philipp Stanner [Wed, 23 Apr 2025 07:53:21 +0000 (09:53 +0200)]
ALSA: rme32: Use pure devres PCI
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Philipp Stanner [Wed, 23 Apr 2025 07:53:20 +0000 (09:53 +0200)]
ALSA: rme96: Use pure devres PCI
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Philipp Stanner [Wed, 23 Apr 2025 07:53:19 +0000 (09:53 +0200)]
ALSA: sonicvibes: Use pure devres PCI
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
František Kučera [Mon, 21 Apr 2025 15:59:53 +0000 (17:59 +0200)]
ALSA: usb-audio: Add Pioneer DJ DJM-V10 support
Pioneer DJ DJM-V10 is a high end mixer that acts like a USB sound card.
The MIDI controller part is standard but the PCM part is "vendor specific".
Input and output is enabled by this patch:
- 12 channels (6 stereo) in each direction
- 44 100 / 48 000 / 96 000 Hz
- S24_3LE
Capture channels can be configured through alsamixer.
Playback channels are fixed and controlled by hardware knobs on the mixer.
ALSA: pcm: Make snd_pcm_lib_malloc_pages() debug message say "allocate"
snd_pcm_lib_malloc_pages() is commonly used for allocating buffers during
the hw_params callback, whereas preallocating buffers goes through
preallocate_pcm_pages().
Having the same terminology in the failure debug messages in both
misleads developers.
Change the debug message in snd_pcm_lib_malloc_pages() to use the
term "allocate" to match its intended use.
ALSA: hda/tas2781: Create a common header for both spi and i2c tas2781 hda driver
Move the common macro definition of kcontrols into a common header for code
cleanup, and create a common header to store the common declaration for
both spi and i2c hda driver.
Richard Fitzgerald [Tue, 15 Apr 2025 10:54:14 +0000 (11:54 +0100)]
ALSA: hda/cirrus_scodec_test: Modernize creation of dummy devices
Replace the old direct use of platform_device APIs with newer KUnit APIs
and the faux bus.
The dummy codec driver device doesn't need to be a platform device.
It can be a faux bus device.
The dummy GPIO driver still must be a platform_device so that a
software_node can be added to it before it probes. But use the new
KUnit-managed APIs to create the platform_device and platform_driver.
These will cleanup automatically when a test completes or fails.
Also use KUnit resource cleanup to destroy the faux bus driver and the GPIO
software node instead of doing this "manually" in test exit() functions.
Merge tag 'asoc-fix-v6.15-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.15
A set of small fixes, quirks and device ID additions that came in since
-rc1, none of them super stand out. There's also a change to Srini's
email address in MAINTAINERS.
Richard Fitzgerald [Thu, 10 Apr 2025 13:21:29 +0000 (14:21 +0100)]
firmware: cs_dsp: test_bin_error: Fix uninitialized data used as fw version
Call cs_dsp_mock_xm_header_get_fw_version() to get the firmware version
from the dummy XM header data in cs_dsp_bin_err_test_common_init().
Make the same change to cs_dsp_bin_test_common_init() and remove the
cs_dsp_mock_xm_header_get_fw_version_from_regmap() function.
The code in cs_dsp_test_bin.c was correctly calling
cs_dsp_mock_xm_header_get_fw_version_from_regmap() to fetch the fw version
from a dummy header it wrote to XM registers. However in
cs_dsp_test_bin_error.c the test doesn't stuff a dummy header into XM, it
populates it the normal way using a wmfw file. It should have called
cs_dsp_mock_xm_header_get_fw_version() to get the data from its blob
buffer, but was calling cs_dsp_mock_xm_header_get_fw_version_from_regmap().
As nothing had been written to the registers this returned the value of
uninitialized data.
The only other use of cs_dsp_mock_xm_header_get_fw_version_from_regmap()
was cs_dsp_test_bin.c, but it doesn't need to use it. It already has a
blob buffer containing the dummy XM header so it can use
cs_dsp_mock_xm_header_get_fw_version() to read from that.
ASoC: fsl: fsl_qmc_audio: Reset audio data pointers on TRIGGER_START event
On SNDRV_PCM_TRIGGER_START event, audio data pointers are not reset.
This leads to wrong data buffer usage when multiple TRIGGER_START are
received and ends to incorrect buffer usage between the user-space and
the driver. Indeed, the driver can read data that are not already set by
the user-space or the user-space and the driver are writing and reading
the same area.
Fix that resetting data pointers on each SNDRV_PCM_TRIGGER_START events.
Charles Keepax [Wed, 9 Apr 2025 12:07:17 +0000 (13:07 +0100)]
ASoC: cs42l43: Reset clamp override on jack removal
Some of the manually selected jack configurations will disable the
headphone clamp override. Restore this on jack removal, such that
the state is consistent for a new insert.
Kailang Yang [Wed, 9 Apr 2025 07:09:08 +0000 (15:09 +0800)]
ALSA: hda/realtek - Fixed ASUS platform headset Mic issue
ASUS platform Headset Mic was disable by default.
Assigned verb table for Mic pin will enable it.
Fixes: 7ab61d0a9a35 ("ALSA: hda/realtek: Add support for ASUS B3405 and B3605 Laptops using CS35L41 HDA") Fixes: c86dd79a7c33 ("ALSA: hda/realtek: Add support for ASUS B5405 and B5605 Laptops using CS35L41 HDA") Signed-off-by: Kailang Yang <kailang@realtek.com> Link: https://lore.kernel.org/0fe3421a6850461fb0b7012cb28ef71d@realtek.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
Depend on SND_HDA_CIRRUS_SCODEC and GPIOLIB instead of selecting them.
KUNIT_ALL_TESTS should only build tests that have satisfied dependencies
and test components that are already being built. It must not cause
other stuff to be added to the build.
ASoC: hdmi-codec: use RTD ID instead of DAI ID for ELD entry
commit 0ecd24a6d8b2 ("ASoC: hdmi-codec: dump ELD through procfs") adds
"eld#%d" entry for sound proc. It is using DAI ID. But it is possible to
have duplicate DAI ID on same Sound Card. In such case, we will get below
error. To avoid duplicate entry name, use RTD ID instead of DAI ID.
ASoC: Intel: avs: Constrain path based on BE capabilities
For i2s and DMIC copiers constraint stream capabilities based on
available NHLT configuration. This allows topology to provide generic
configuration that handles more hardware, while filtering unavailable
ones at runtime.
Henry Martin [Wed, 2 Apr 2025 14:14:11 +0000 (22:14 +0800)]
ASoC: Intel: avs: Fix null-ptr-deref in avs_component_probe()
devm_kasprintf() returns NULL when memory allocation fails. Currently,
avs_component_probe() does not check for this case, which results in a
NULL pointer dereference.
Fixes: 739c031110da ("ASoC: Intel: avs: Provide support for fallback topology") Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Ethan Carter Edwards <ethan@ethancedwards.com> Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com> Link: https://patch.msgid.link/20250402141411.44972-1-bsdhenrymartin@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
Shengjiu Wang [Wed, 19 Mar 2025 03:35:04 +0000 (11:35 +0800)]
ASoC: fsl_asrc_dma: get codec or cpu dai from backend
With audio graph card, original cpu dai is changed to codec device in
backend, so if cpu dai is dummy device in backend, get the codec dai
device, which is the real hardware device connected.
Case values introduced in commit 5f78e1fb7a3e ("ASoC: qcom: Add driver support for audioreach solution")
cause out of bounds access in arrays of sc7280 driver data (e.g. in case
of RX_CODEC_DMA_RX_0 in sc7280_snd_hw_params()).
Redefine LPASS_MAX_PORTS to consider the maximum possible port id for
q6dsp as sc7280 driver utilizes some of those values.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 77d0ffef793d ("ASoC: qcom: Add macro for lpass DAI id's max limit") Cc: stable@vger.kernel.org # v6.0+ Suggested-by: Mikhail Kobuk <m.kobuk@ispras.ru> Suggested-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Evgeny Pimenov <pimenoveu12@gmail.com> Link: https://patch.msgid.link/20250401204058.32261-1-pimenoveu12@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
Brady Norander [Sun, 30 Mar 2025 13:08:54 +0000 (09:08 -0400)]
ASoC: dwc: always enable/disable i2s irqs
Commit a42e988 ("ASoC: dwc: add DMA handshake control") changed the
behavior of the driver to not enable or disable i2s irqs if using DMA. This
breaks platforms such as AMD ACP. Audio playback appears to work but no
audio can be heard. Revert to the old behavior by always enabling and
disabling i2s irqs while keeping DMA handshake control.
ASoC: codecs:lpass-wsa-macro: Fix logic of enabling vi channels
Existing code only configures one of WSA_MACRO_TX0 or WSA_MACRO_TX1
paths eventhough we enable both of them. Fix this bug by adding proper
checks and rearranging some of the common code to able to allow setting
both TX0 and TX1 paths
Without this patch only one channel gets enabled in VI path instead of 2
channels. End result would be 1 channel recording instead of 2.
Fixes: 2c4066e5d428 ("ASoC: codecs: lpass-wsa-macro: add dapm widgets and route") Cc: stable@vger.kernel.org Co-developed-by: Manikantan R <quic_manrav@quicinc.com> Signed-off-by: Manikantan R <quic_manrav@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://patch.msgid.link/20250403160209.21613-3-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
Thomas Weißschuh [Wed, 2 Apr 2025 20:21:57 +0000 (21:21 +0100)]
tools/include: make uapi/linux/types.h usable from assembly
The "real" linux/types.h UAPI header gracefully degrades to a NOOP when
included from assembly code.
Mirror this behaviour in the tools/ variant.
Test for __ASSEMBLER__ over __ASSEMBLY__ as the former is provided by the
toolchain automatically.
Reported-by: Mark Brown <broonie@kernel.org> Closes: https://lore.kernel.org/lkml/af553c62-ca2f-4956-932c-dd6e3a126f58@sirena.org.uk/ Fixes: c9fbaa879508 ("selftests: vDSO: parse_vdso: Use UAPI headers instead of libc headers") Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Link: https://patch.msgid.link/20250321-uapi-consistency-v1-1-439070118dc0@linutronix.de Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'soundwire-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fix from Vinod Koul:
- add missing config symbol CONFIG_SND_HDA_EXT_CORE required for asoc
driver CONFIG_SND_SOF_SOF_HDA_SDW_BPT
* tag 'soundwire-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
ASoC: SOF: Intel: Let SND_SOF_SOF_HDA_SDW_BPT select SND_HDA_EXT_CORE
Len Brown [Sun, 6 Apr 2025 18:49:20 +0000 (14:49 -0400)]
tools/power turbostat: v2025.05.06
Support up to 8192 processors
Add cpuidle governor debug telemetry, disabled by default
Update default output to exclude cpuidle invocation counts
Bug fixes
Merge tag 'perf-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fix from Ingo Molnar:
"Fix a perf events time accounting bug"
* tag 'perf-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix child_total_time_enabled accounting bug at task exit
Merge tag 'sched-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix a nonsensical Kconfig combination
- Remove an unnecessary rseq-notification
* tag 'sched-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Eliminate useless task_work on execve
sched/isolation: Make CONFIG_CPU_ISOLATION depend on CONFIG_SMP
... and don't error out so hard on missing module descriptions.
Before commit 6c6c1fc09de3 ("modpost: require a MODULE_DESCRIPTION()")
we used to warn about missing module descriptions, but only when
building with extra warnigns (ie 'W=1').
After that commit the warning became an unconditional hard error.
And it turns out not all modules have been converted despite the claims
to the contrary. As reported by Damian Tometzki, the slub KUnit test
didn't have a module description, and apparently nobody ever really
noticed.
The reason nobody noticed seems to be that the slub KUnit tests get
disabled by SLUB_TINY, which also ends up disabling a lot of other code,
both in tests and in slub itself. And so anybody doing full build tests
didn't actually see this failre.
So let's disable SLUB_TINY for build-only tests, since it clearly ends
up limiting build coverage. Also turn the missing module descriptions
error back into a warning, but let's keep it around for non-'W=1'
builds.
Len Brown [Sun, 6 Apr 2025 15:18:39 +0000 (11:18 -0400)]
tools/power turbostat: report CoreThr per measurement interval
The CoreThr column displays total thermal throttling events
since boot time.
Change it to report events during the measurement interval.
This is more useful for showing a user the current conditions.
Total events since boot time are still available to the user via
/sys/devices/system/cpu/cpu*/thermal_throttle/*
Document CoreThr on turbostat.8
Fixes: eae97e053fe30 ("turbostat: Support thermal throttle count print") Reported-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Cc: Chen Yu <yu.c.chen@intel.com>
Justin Ernst [Wed, 19 Mar 2025 20:27:31 +0000 (15:27 -0500)]
tools/power turbostat: Increase CPU_SUBSET_MAXCPUS to 8192
On systems with >= 1024 cpus (in my case 1152), turbostat fails with the error output:
"turbostat: /sys/fs/cgroup/cpuset.cpus.effective: cpu str malformat 0-1151"
A similar error appears with the use of turbostat --cpu when the inputted cpu
range contains a cpu number >= 1024:
# turbostat -c 1100-1151
"--cpu 1100-1151" malformed
...
Both errors are caused by parse_cpu_str() reaching its limit of CPU_SUBSET_MAXCPUS.
It's a good idea to limit the maximum cpu number being parsed, but 1024 is too low.
For a small increase in compute and allocated memory, increasing CPU_SUBSET_MAXCPUS
brings support for parsing cpu numbers >= 1024.
Increase CPU_SUBSET_MAXCPUS to 8192, a common setting for CONFIG_NR_CPUS on x86_64.
Signed-off-by: Justin Ernst <justin.ernst@hpe.com> Signed-off-by: Len Brown <len.brown@intel.com>
Merge tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A set of final cleanups for the timer subsystem:
- Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
- The final cleanup of the hrtimer_init() to hrtimer_setup()
conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline
and all new users are catched.
Doing this right before rc1 ensures that new code which is merged post
rc1 is not introducing new instances of the original functionality"
* tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tracing/timers: Rename the hrtimer_init event to hrtimer_setup
hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack()
hrtimers: Rename debug_init() to debug_setup()
hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper()
hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns()
hrtimers: Make callback function pointer private
hrtimers: Merge __hrtimer_init() into __hrtimer_setup()
hrtimers: Switch to use __htimer_setup()
hrtimers: Delete hrtimer_init()
treewide: Convert new and leftover hrtimer_init() users
treewide: Switch/rename to timer_delete[_sync]()
Merge tag 'irq-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more irq updates from Thomas Gleixner:
"A set of updates for the interrupt subsystem:
- A treewide cleanup for the irq_domain code, which makes the naming
consistent and gets rid of the original oddity of naming domains
'host'.
This is a trivial mechanical change and is done late to ensure that
all instances have been catched and new code merged post rc1 wont
reintroduce new instances.
- A trivial consistency fix in the migration code
The recent introduction of irq_force_complete_move() in the core
code, causes a problem for the nostalgia crowd who maintains ia64
out of tree.
The code assumes that hierarchical interrupt domains are enabled
and dereferences irq_data::parent_data unconditionally. That works
in mainline because both architectures which enable that code have
hierarchical domains enabled. Though it breaks the ia64 build,
which enables the functionality, but does not have hierarchical
domains.
While it's not really a problem for mainline today, this
unconditional dereference is inconsistent and trivially fixable by
using the existing helper function irqd_get_parent_data(), which
has the appropriate #ifdeffery in place"
* tag 'irq-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/migration: Use irqd_get_parent_data() in irq_force_complete_move()
irqdomain: Stop using 'host' for domain
irqdomain: Rename irq_get_default_host() to irq_get_default_domain()
irqdomain: Rename irq_set_default_host() to irq_set_default_domain()
Merge tag 'timers-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A revert to fix a adjtimex() regression:
The recent change to prevent that time goes backwards for the coarse
time getters due to immediate multiplier adjustments via adjtimex(),
changed the way how the timekeeping core treats that.
That change result in a regression on the adjtimex() side, which is
user space visible:
1) The forwarding of the base time moves the update out of the
original period and establishes a new one. That's changing the
behaviour of the [PF]LL control, which user space expects to be
applied periodically.
2) The clearing of the accumulated NTP error due to #1, changes the
behaviour as well.
An attempt to delay the multiplier/frequency update to the next tick
did not solve the problem as userspace expects that the multiplier or
frequency updates are in effect, when the syscall returns.
There is a different solution for the coarse time problem available,
so revert the offending commit to restore the existing adjtimex()
behaviour"
* tag 'timers-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "timekeeping: Fix possible inconsistencies in _COARSE clockids"
Merge tag 'sh-for-v6.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"One important fix and one small configuration update.
The first patch by Artur Rojek fixes an issue with the J2 firmware
loader not being able to find the location of the device tree blob due
to insufficient alignment of the .bss section which rendered J2 boards
unbootable.
The second patch by Johan Korsnes updates the defconfigs on sh to drop
the CONFIG_NET_CLS_TCINDEX configuration option which became obsolete
after 8c710f75256b ("net/sched: Retire tcindex classifier").
Summary:
- sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
- sh: Align .bss section padding to 8-byte boundary"
* tag 'sh-for-v6.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
sh: Align .bss section padding to 8-byte boundary
projects / users / jedix / linux-maple.git / log