bnxt_en: Fix the resource check condition for RSS contexts
While creating a new RSS context, bnxt_rfs_capable() currently
makes a strict check to see if the required VNICs are already
available. If the current VNICs are not what is required,
either too many or not enough, it will call the firmware to
reserve the exact number required.
There is a bug in the firmware when the driver tries to
relinquish some reserved VNICs and RSS contexts. It will
cause the default VNIC to lose its RSS configuration and
cause receive packets to be placed incorrectly.
Workaround this problem by skipping the resource reduction.
The driver will not reduce the VNIC and RSS context reservations
when a context is deleted. The resources will be available for
use when new contexts are created later.
Potentially, this workaround can cause us to run out of VNIC
and RSS contexts if there are a lot of VF functions creating
and deleting RSS contexts. In the future, we will conditionally
disable this workaround when the firmware fix is available.
Aleksandr Mishin [Wed, 3 Jul 2024 20:32:51 +0000 (23:32 +0300)]
mlxsw: core_linecards: Fix double memory deallocation in case of invalid INI file
In case of invalid INI file mlxsw_linecard_types_init() deallocates memory
but doesn't reset pointer to NULL and returns 0. In case of any error
occurred after mlxsw_linecard_types_init() call, mlxsw_linecards_init()
calls mlxsw_linecard_types_fini() which performs memory deallocation again.
Add pointer reset to NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b217127e5e4e ("mlxsw: core_linecards: Add line card objects and implement provisioning") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Link: https://patch.msgid.link/20240703203251.8871-1-amishin@t-argos.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 4 Jul 2024 14:31:54 +0000 (07:31 -0700)]
Merge tag 'wireless-2024-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.10
Hopefully the last fixes for v6.10. Fix a regression in wilc1000
where bitrate Information Elements longer than 255 bytes were broken.
Few fixes also to mac80211 and iwlwifi.
* tag 'wireless-2024-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference
wifi: iwlwifi: mvm: avoid link lookup in statistics
wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL
wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK
wifi: wilc1000: fix ies_len type in connect path
wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESP
====================
Paolo Abeni [Thu, 4 Jul 2024 13:31:26 +0000 (15:31 +0200)]
Merge tag 'nf-24-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains a oneliner patch to inconditionally flush
workqueue containing stale objects to be released, syzbot managed to
trigger UaF. Patch from Florian Westphal.
netfilter pull request 24-07-04
* tag 'nf-24-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: unconditionally flush pending work before notifier
====================
Shigeru Yoshida [Wed, 3 Jul 2024 09:16:49 +0000 (18:16 +0900)]
inet_diag: Initialize pad field in struct inet_diag_req_v2
KMSAN reported uninit-value access in raw_lookup() [1]. Diag for raw
sockets uses the pad field in struct inet_diag_req_v2 for the
underlying protocol. This field corresponds to the sdiag_raw_protocol
field in struct inet_diag_req_raw.
inet_diag_get_exact_compat() converts inet_diag_req to
inet_diag_req_v2, but leaves the pad field uninitialized. So the issue
occurs when raw_lookup() accesses the sdiag_raw_protocol field.
Fix this by initializing the pad field in
inet_diag_get_exact_compat(). Also, do the same fix in
inet_diag_dump_compat() to avoid the similar issue in the future.
tcp: Don't flag tcp_sk(sk)->rx_opt.saw_unknown for TCP AO.
When we process segments with TCP AO, we don't check it in
tcp_parse_options(). Thus, opt_rx->saw_unknown is set to 1,
which unconditionally triggers the BPF TCP option parser.
Let's avoid the unnecessary BPF invocation.
Fixes: 0a3a809089eb ("net/tcp: Verify inbound TCP-AO signed segments") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Dmitry Safonov <0x7f454c46@gmail.com> Link: https://patch.msgid.link/20240703033508.6321-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
====================
fix OOM and order check in msg_zerocopy selftest
In selftests/net/msg_zerocopy.c, it has a while loop keeps calling sendmsg
on a socket with MSG_ZEROCOPY flag, and it will recv the notifications
until the socket is not writable. Typically, it will start the receiving
process after around 30+ sendmsgs. However, as the introduction of commit dfa2f0483360 ("tcp: get rid of sysctl_tcp_adv_win_scale"), the sender is
always writable and does not get any chance to run recv notifications.
The selftest always exits with OUT_OF_MEMORY because the memory used by
opt_skb exceeds the net.core.optmem_max. Meanwhile, it could be set to a
different value to trigger OOM on older kernels too.
Thus, we introduce "cfg_notification_limit" to force sender to receive
notifications after some number of sendmsgs.
And, we find that when lock debugging is on, notifications may not come in
order. Thus, we have order checking outputs managed by cfg_verbose, to
avoid too many outputs in this case.
====================
selftests: make order checking verbose in msg_zerocopy selftest
We find that when lock debugging is on, notifications may not come in
order. Thus, we have order checking outputs managed by cfg_verbose, to
avoid too many outputs in this case.
Fixes: 07b65c5b31ce ("test: add msg_zerocopy test") Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com> Signed-off-by: Xiaochun Lu <xiaochun.lu@bytedance.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240701225349.3395580-3-zijianzhang@bytedance.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In selftests/net/msg_zerocopy.c, it has a while loop keeps calling sendmsg
on a socket with MSG_ZEROCOPY flag, and it will recv the notifications
until the socket is not writable. Typically, it will start the receiving
process after around 30+ sendmsgs. However, as the introduction of commit dfa2f0483360 ("tcp: get rid of sysctl_tcp_adv_win_scale"), the sender is
always writable and does not get any chance to run recv notifications.
The selftest always exits with OUT_OF_MEMORY because the memory used by
opt_skb exceeds the net.core.optmem_max. Meanwhile, it could be set to a
different value to trigger OOM on older kernels too.
Thus, we introduce "cfg_notification_limit" to force sender to receive
notifications after some number of sendmsgs.
Fixes: 07b65c5b31ce ("test: add msg_zerocopy test") Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com> Signed-off-by: Xiaochun Lu <xiaochun.lu@bytedance.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240701225349.3395580-2-zijianzhang@bytedance.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Intel Wired LAN Driver Updates 2024-06-25 (ice)
This series contains updates to ice driver only.
Milena adds disabling of extts events when PTP is disabled.
Jake prevents possible NULL pointer by checking that timestamps are
ready before processing extts events and adds checks for unsupported
PTP pin configuration.
Petr Oros replaces _test_bit() with the correct test_bit() macro.
v1: https://lore.kernel.org/netdev/20240625170248.199162-1-anthony.l.nguyen@intel.com/
====================
Petr Oros [Tue, 2 Jul 2024 17:14:57 +0000 (10:14 -0700)]
ice: use proper macro for testing bit
Do not use _test_bit() macro for testing bit. The proper macro for this
is one without underline.
_test_bit() is what test_bit() was prior to const-optimization. It
directly calls arch_test_bit(), i.e. the arch-specific implementation
(or the generic one). It's strictly _internal_ and shouldn't be used
anywhere outside the actual test_bit() macro.
test_bit() is a wrapper which checks whether the bitmap and the bit
number are compile-time constants and if so, it calls the optimized
function which evaluates this call to a compile-time constant as well.
If either of them is not a compile-time constant, it just calls _test_bit().
test_bit() is the actual function to use anywhere in the kernel.
The sensors is not a compile-time constant, thus most probably there
are no object code changes before and after the patch.
But anyway, we shouldn't call internal wrappers instead of
the actual API.
Fixes: 4da71a77fc3b ("ice: read internal temperature sensor") Acked-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240702171459.2606611-5-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jacob Keller [Tue, 2 Jul 2024 17:14:56 +0000 (10:14 -0700)]
ice: Reject pin requests with unsupported flags
The driver receives requests for configuring pins via the .enable
callback of the PTP clock object. These requests come into the driver
with flags which modify the requested behavior from userspace. Current
implementation in ice does not reject flags that it doesn't support.
This causes the driver to incorrectly apply requests with such flags as
PTP_PEROUT_DUTY_CYCLE, or any future flags added by the kernel which it
is not yet aware of.
Fix this by properly validating flags in both ice_ptp_cfg_perout and
ice_ptp_cfg_extts. Ensure that we check by bit-wise negating supported
flags rather than just checking and rejecting known un-supported flags.
This is preferable, as it ensures better compatibility with future
kernels.
Fixes: 172db5f91d5f ("ice: add support for auxiliary input/output pins") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240702171459.2606611-4-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jacob Keller [Tue, 2 Jul 2024 17:14:55 +0000 (10:14 -0700)]
ice: Don't process extts if PTP is disabled
The ice_ptp_extts_event() function can race with ice_ptp_release() and
result in a NULL pointer dereference which leads to a kernel panic.
Panic occurs because the ice_ptp_extts_event() function calls
ptp_clock_event() with a NULL pointer. The ice driver has already
released the PTP clock by the time the interrupt for the next external
timestamp event occurs.
To fix this, modify the ice_ptp_extts_event() function to check the
PTP state and bail early if PTP is not ready.
Fixes: 172db5f91d5f ("ice: add support for auxiliary input/output pins") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240702171459.2606611-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extts events are disabled and enabled by the application ts2phc.
However, in case where the driver is removed when the application is
running, a specific extts event remains enabled and can cause a kernel
crash.
As a side effect, when the driver is reloaded and application is started
again, remaining extts event for the channel from a previous run will
keep firing and the message "extts on unexpected channel" might be
printed to the user.
To avoid that, extts events shall be disabled when PTP is released.
Fixes: 172db5f91d5f ("ice: add support for auxiliary input/output pins") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Co-developed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Milena Olech <milena.olech@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240702171459.2606611-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shigeru Yoshida [Tue, 2 Jul 2024 16:04:27 +0000 (01:04 +0900)]
af_unix: Fix uninit-value in __unix_walk_scc()
KMSAN reported uninit-value access in __unix_walk_scc() [1].
In the list_for_each_entry_reverse() loop, when the vertex's index
equals it's scc_index, the loop uses the variable vertex as a
temporary variable that points to a vertex in scc. And when the loop
is finished, the variable vertex points to the list head, in this case
scc, which is a local variable on the stack (more precisely, it's not
even scc and might underflow the call stack of __unix_walk_scc():
container_of(&scc, struct unix_vertex, scc_entry)).
However, the variable vertex is used under the label prev_vertex. So
if the edge_stack is not empty and the function jumps to the
prev_vertex label, the function will access invalid data on the
stack. This causes the uninit-value access issue.
Fix this by introducing a new temporary variable for the loop.
Sam Sun [Tue, 2 Jul 2024 13:55:55 +0000 (14:55 +0100)]
bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set()
In function bond_option_arp_ip_targets_set(), if newval->string is an
empty string, newval->string+1 will point to the byte after the
string, causing an out-of-bound read.
Fix it by adding a check of string length before using it.
Fixes: f9de11a16594 ("bonding: add ip checks when store ip target") Signed-off-by: Yue Sun <samsun1006219@gmail.com> Signed-off-by: Simon Horman <horms@kernel.org> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20240702-bond-oob-v6-1-2dfdba195c19@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Radu Rendec [Tue, 2 Jul 2024 21:08:37 +0000 (17:08 -0400)]
net: rswitch: Avoid use-after-free in rswitch_poll()
The use-after-free is actually in rswitch_tx_free(), which is inlined in
rswitch_poll(). Since `skb` and `gq->skbs[gq->dirty]` are in fact the
same pointer, the skb is first freed using dev_kfree_skb_any(), then the
value in skb->len is used to update the interface statistics.
Let's move around the instructions to use skb->len before the skb is
freed.
This bug is trivial to reproduce using KFENCE. It will trigger a splat
every few packets. A simple ARP request or ICMP echo request is enough.
Fixes: 271e015b9153 ("net: rswitch: Add unmap_addrs instead of dma address in each desc") Signed-off-by: Radu Rendec <rrendec@redhat.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://patch.msgid.link/20240702210838.2703228-1-rrendec@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netfilter: nf_tables: unconditionally flush pending work before notifier
syzbot reports:
KASAN: slab-uaf in nft_ctx_update include/net/netfilter/nf_tables.h:1831
KASAN: slab-uaf in nft_commit_release net/netfilter/nf_tables_api.c:9530
KASAN: slab-uaf int nf_tables_trans_destroy_work+0x152b/0x1750 net/netfilter/nf_tables_api.c:9597
Read of size 2 at addr ffff88802b0051c4 by task kworker/1:1/45
[..]
Workqueue: events nf_tables_trans_destroy_work
Call Trace:
nft_ctx_update include/net/netfilter/nf_tables.h:1831 [inline]
nft_commit_release net/netfilter/nf_tables_api.c:9530 [inline]
nf_tables_trans_destroy_work+0x152b/0x1750 net/netfilter/nf_tables_api.c:9597
Problem is that the notifier does a conditional flush, but its possible
that the table-to-be-removed is still referenced by transactions being
processed by the worker, so we need to flush unconditionally.
We could make the flush_work depend on whether we found a table to delete
in nf-next to avoid the flush for most cases.
AFAICS this problem is only exposed in nf-next, with
commit e169285f8c56 ("netfilter: nf_tables: do not store nft_ctx in transaction objects"),
with this commit applied there is an unconditional fetch of
table->family which is whats triggering the above splat.
Fixes: 2c9f0293280e ("netfilter: nf_tables: flush pending destroy work before netlink notifier") Reported-and-tested-by: syzbot+4fd66a69358fc15ae2ad@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=4fd66a69358fc15ae2ad Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference
iwl_mvm_get_bss_vif might return a NULL or ERR_PTR. Some of the callers
check only the NULL case, and some doesn't check at all.
Some of the callers even have a pointer to the mvmvif of the bss vif,
so we don't even need to call this function, and can simply get the vif
from mvmvif. Do it for those cases, and for the others - properly check
if IS_ERR_OR_NULL
Johannes Berg [Wed, 3 Jul 2024 03:43:14 +0000 (06:43 +0300)]
wifi: iwlwifi: mvm: avoid link lookup in statistics
We already iterate the link bss_conf/link_info and have the
pointer, or know that deflink/bss_conf is used, so avoid an
extra lookup and just pass the pointer. This may also avoid
a crash when this is processed during restart, where the FW
to link conf array (link_id_to_link_conf) may be NULLed out.
wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL
Since we now want to sync the queues even when we're in RFKILL, we
shouldn't wake up the wait queue since we still expect to get all the
notifications from the firmware.
Daniel Gabay [Wed, 3 Jul 2024 03:43:13 +0000 (06:43 +0300)]
wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK
The WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK should be set based on the
WOWLAN_KEK_KCK_MATERIAL command version. Currently, the command
version in the firmware has advanced to 4, which prevents the
flag from being set correctly, fix that.
Jozef Hopko [Mon, 1 Jul 2024 16:23:20 +0000 (18:23 +0200)]
wifi: wilc1000: fix ies_len type in connect path
Commit 205c50306acf ("wifi: wilc1000: fix RCU usage in connect path")
made sure that the IEs data was manipulated under the relevant RCU section.
Unfortunately, while doing so, the commit brought a faulty implicit cast
from int to u8 on the ies_len variable, making the parsing fail to be
performed correctly if the IEs block is larger than 255 bytes. This failure
can be observed with Access Points appending a lot of IEs TLVs in their
beacon frames (reproduced with a Pixel phone acting as an Access Point,
which brough 273 bytes of IE data in my testing environment).
Fix IEs parsing by removing this undesired implicit cast.
Fixes: 205c50306acf ("wifi: wilc1000: fix RCU usage in connect path") Signed-off-by: Jozef Hopko <jozef.hopko@altana.com> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Acked-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240701-wilc_fix_ies_data-v1-1-7486cbacf98a@bootlin.com
net: stmmac: enable HW-accelerated VLAN stripping for gmac4 only
Commit 750011e239a5 ("net: stmmac: Add support for HW-accelerated VLAN
stripping") enables MAC level VLAN tag stripping for all MAC cores, but
leaves set_hw_vlan_mode() and rx_hw_vlan() un-implemented for both gmac
and xgmac.
On gmac and xgmac, ethtool reports rx-vlan-offload is on, both MAC and
driver do nothing about VLAN packets actually, although VLAN works well.
Driver level stripping should be used on gmac and xgmac for now.
Fixes: 750011e239a5 ("net: stmmac: Add support for HW-accelerated VLAN stripping") Signed-off-by: Furong Xu <0x1207@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The cause is due to the idxd driver interrupt completion handler uses
threaded interrupt and the threaded handler is not hard or soft interrupt
context. However __netif_rx() can only be called from interrupt context.
Change the call to netif_rx() in order to allow completion via normal
context for dmaengine drivers that utilize threaded irq handling.
While the following commit changed from netif_rx() to __netif_rx(), baebdf48c360 ("net: dev: Makes sure netif_rx() can be invoked in any context."),
the change should've been a noop instead. However, the code precedes this
fix should've been using netif_rx_ni() or netif_rx_any_context().
Fixes: 548c237c0a99 ("net: Add support for NTB virtual ethernet device") Reported-by: Jerry Dai <jerry.dai@intel.com> Tested-by: Jerry Dai <jerry.dai@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://patch.msgid.link/20240701181538.3799546-1-dave.jiang@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When using MSI/INTx interrupt, the shared interrupts are still being
handled in the device remove routine, before free IRQs. So isb memory
is still read after it is freed. Thus move wx_free_isb_resources()
from txgbe_close() to txgbe_remove(). And fix the improper isb free
action in txgbe_open() error handling path.
Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net: txgbe: add extra handle for MSI/INTx into thread irq handle
Rename original txgbe_misc_irq_handle() to txgbe_misc_irq_thread_fn()
since it is the handle thread to wake up. And add the primary handler
to deal the case of MSI/INTx, because there is a schedule NAPI poll.
Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net: txgbe: remove separate irq request for MSI and INTx
When using MSI or INTx interrupts, request_irq() for pdev->irq will
conflict with request_threaded_irq() for txgbe->misc.irq, to cause
system crash. So remove txgbe_request_irq() for MSI/INTx case, and
rename txgbe_request_msix_irqs() since it only request for queue irqs.
Add wx->misc_irq_domain to determine whether the driver creates an IRQ
domain and threaded request the IRQs.
Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Sagi Grimberg [Wed, 26 Jun 2024 10:00:08 +0000 (13:00 +0300)]
net: allow skb_datagram_iter to be called from any context
We only use the mapping in a single context, so kmap_local is sufficient
and cheaper. Make sure to use skb_frag_foreach_page as skb frags may
contain compound pages and we need to map page by page.
Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202406161539.b5ff7b20-oliver.sang@intel.com Fixes: 950fcaecd5cc ("datagram: consolidate datagram copy to iter helpers") Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Link: https://patch.msgid.link/20240626100008.831849-1-sagi@grimberg.me Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Dima Ruinskiy [Fri, 28 Jun 2024 20:17:53 +0000 (13:17 -0700)]
e1000e: Fix S0ix residency on corporate systems
On vPro systems, the configuration of the I219-LM to achieve power
gating and S0ix residency is split between the driver and the CSME FW.
It was discovered that in some scenarios, where the network cable is
connected and then disconnected, S0ix residency is not always reached.
This was root-caused to a subset of I219-LM register writes that are not
performed by the CSME FW. Therefore, the driver should perform these
register writes on corporate setups, regardless of the CSME FW state.
This was discovered on Meteor Lake systems; however it is likely to
appear on other platforms as well.
Jakub Kicinski [Tue, 2 Jul 2024 03:00:24 +0000 (20:00 -0700)]
Merge tag 'linux-can-fixes-for-6.10-20240701' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2024-07-01
Jimmy Assarsson's patch for the kvaser_usb adds a missing explicit
initialization of the struct kvaser_usb_driver_info::family for the
kvaser_usb_driver_info_leafimx.
* tag 'linux-can-fixes-for-6.10-20240701' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: kvaser_usb: Explicitly initialize family in leafimx driver_info struct
====================
David S. Miller [Mon, 1 Jul 2024 12:08:12 +0000 (13:08 +0100)]
Merge tag 'for-net-2024-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth into main
bluetooth pull request for net:
- Ignore too large handle values in BIG
- L2CAP: sync sock recv cb and release
- hci_bcm4377: Fix msgid release
- ISO: Check socket flag instead of hcon
- hci_event: Fix setting of unicast qos interval
- hci: disallow setting handle bigger than HCI_CONN_HANDLE_MAX
- Add quirk to ignore reserved PHY bits in LE Extended Adv Report
- hci_core: cancel all works upon hci_unregister_dev
- btintel_pcie: Fix REVERSE_INULL issue reported by coverity
- qca: Fix BT enable failure again for QCA6390 after warm reboot
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 27 Jun 2024 21:25:00 +0000 (14:25 -0700)]
tcp_metrics: validate source addr length
I don't see anything checking that TCP_METRICS_ATTR_SADDR_IPV4
is at least 4 bytes long, and the policy doesn't have an entry
for this attribute at all (neither does it for IPv6 but v6 is
manually validated).
Reviewed-by: Eric Dumazet <edumazet@google.com> Fixes: 3e7013ddf55a ("tcp: metrics: Allow selective get/del of tcp-metrics based on src IP") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Jimmy Assarsson [Fri, 28 Jun 2024 19:45:29 +0000 (21:45 +0200)]
can: kvaser_usb: Explicitly initialize family in leafimx driver_info struct
Explicitly set the 'family' driver_info struct member for leafimx.
Previously, the correct operation relied on KVASER_LEAF being the first
defined value in enum kvaser_usb_leaf_family.
Fixes: e6c80e601053 ("can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regression") Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20240628194529.312968-1-extja@kvaser.com Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Fix UBSAN warnings that occur when using a system with 32 physical
cpu cores or more, or when the user defines a number of Ethernet
queues greater than or equal to FP_SB_MAX_E1x using the num_queues
module parameter.
Currently there is a read/write out of bounds that occurs on the array
"struct stats_query_entry query" present inside the "bnx2x_fw_stats_req"
struct in "drivers/net/ethernet/broadcom/bnx2x/bnx2x.h".
Looking at the definition of the "struct stats_query_entry query" array:
FP_SB_MAX_E1x is defined as the maximum number of fast path interrupts and
has a value of 16, while BNX2X_FIRST_QUEUE_QUERY_IDX has a value of 3
meaning the array has a total size of 19.
Since accesses to "struct stats_query_entry query" are offset-ted by
BNX2X_FIRST_QUEUE_QUERY_IDX, that means that the total number of Ethernet
queues should not exceed FP_SB_MAX_E1x (16). However one of these queues
is reserved for FCOE and thus the number of Ethernet queues should be set
to [FP_SB_MAX_E1x -1] (15) if FCOE is enabled or [FP_SB_MAX_E1x] (16) if
it is not.
This is also described in a comment in the source code in
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h just above the Macro definition
of FP_SB_MAX_E1x. Below is the part of this explanation that it important
for this patch
/*
* The total number of L2 queues, MSIX vectors and HW contexts (CIDs) is
* control by the number of fast-path status blocks supported by the
* device (HW/FW). Each fast-path status block (FP-SB) aka non-default
* status block represents an independent interrupts context that can
* serve a regular L2 networking queue. However special L2 queues such
* as the FCoE queue do not require a FP-SB and other components like
* the CNIC may consume FP-SB reducing the number of possible L2 queues
*
* If the maximum number of FP-SB available is X then:
* a. If CNIC is supported it consumes 1 FP-SB thus the max number of
* regular L2 queues is Y=X-1
* b. In MF mode the actual number of L2 queues is Y= (X-1/MF_factor)
* c. If the FCoE L2 queue is supported the actual number of L2 queues
* is Y+1
* d. The number of irqs (MSIX vectors) is either Y+1 (one extra for
* slow-path interrupts) or Y+2 if CNIC is supported (one additional
* FP interrupt context for the CNIC).
* e. The number of HW context (CID count) is always X or X+1 if FCoE
* L2 queue is supported. The cid for the FCoE L2 queue is always X.
*/
However this driver also supports NICs that use the E2 controller which can
handle more queues due to having more FP-SB represented by FP_SB_MAX_E2.
Looking at the commits when the E2 support was added, it was originally
using the E1x parameters: commit f2e0899f0f27 ("bnx2x: Add 57712 support").
Back then FP_SB_MAX_E2 was set to 16 the same as E1x. However the driver
was later updated to take full advantage of the E2 instead of having it be
limited to the capabilities of the E1x. But as far as we can tell, the
array "stats_query_entry query" was still limited to using the FP-SB
available to the E1x cards as part of an oversignt when the driver was
updated to take full advantage of the E2, and now with the driver being
aware of the greater queue size supported by E2 NICs, it causes the UBSAN
warnings seen in the stack traces below.
This patch increases the size of the "stats_query_entry query" array by
replacing FP_SB_MAX_E1x with FP_SB_MAX_E2 to be large enough to handle
both types of NICs.
Stack traces:
UBSAN: array-index-out-of-bounds in
drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c:1529:11
index 20 is out of range for type 'stats_query_entry [19]'
CPU: 12 PID: 858 Comm: systemd-network Not tainted 6.9.0-060900rc7-generic
#202405052133
Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9,
BIOS P89 10/21/2019
Call Trace:
<TASK>
dump_stack_lvl+0x76/0xa0
dump_stack+0x10/0x20
__ubsan_handle_out_of_bounds+0xcb/0x110
bnx2x_prep_fw_stats_req+0x2e1/0x310 [bnx2x]
bnx2x_stats_init+0x156/0x320 [bnx2x]
bnx2x_post_irq_nic_init+0x81/0x1a0 [bnx2x]
bnx2x_nic_load+0x8e8/0x19e0 [bnx2x]
bnx2x_open+0x16b/0x290 [bnx2x]
__dev_open+0x10e/0x1d0
RIP: 0033:0x736223927a0a
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca
64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00
f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
RSP: 002b:00007ffc0bb2ada8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000583df50f9c78 RCX: 0000736223927a0a
RDX: 0000000000000020 RSI: 0000583df50ee510 RDI: 0000000000000003
RBP: 0000583df50d4940 R08: 00007ffc0bb2adb0 R09: 0000000000000080
R10: 0000000000000000 R11: 0000000000000246 R12: 0000583df5103ae0
R13: 000000000000035a R14: 0000583df50f9c30 R15: 0000583ddddddf00
</TASK>
---[ end trace ]---
------------[ cut here ]------------
UBSAN: array-index-out-of-bounds in
drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c:1546:11
index 28 is out of range for type 'stats_query_entry [19]'
CPU: 12 PID: 858 Comm: systemd-network Not tainted 6.9.0-060900rc7-generic
#202405052133
Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9,
BIOS P89 10/21/2019
Call Trace:
<TASK>
dump_stack_lvl+0x76/0xa0
dump_stack+0x10/0x20
__ubsan_handle_out_of_bounds+0xcb/0x110
bnx2x_prep_fw_stats_req+0x2fd/0x310 [bnx2x]
bnx2x_stats_init+0x156/0x320 [bnx2x]
bnx2x_post_irq_nic_init+0x81/0x1a0 [bnx2x]
bnx2x_nic_load+0x8e8/0x19e0 [bnx2x]
bnx2x_open+0x16b/0x290 [bnx2x]
__dev_open+0x10e/0x1d0
RIP: 0033:0x736223927a0a
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca
64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00
f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
RSP: 002b:00007ffc0bb2ada8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000583df50f9c78 RCX: 0000736223927a0a
RDX: 0000000000000020 RSI: 0000583df50ee510 RDI: 0000000000000003
RBP: 0000583df50d4940 R08: 00007ffc0bb2adb0 R09: 0000000000000080
R10: 0000000000000000 R11: 0000000000000246 R12: 0000583df5103ae0
R13: 000000000000035a R14: 0000583df50f9c30 R15: 0000583ddddddf00
</TASK>
---[ end trace ]---
------------[ cut here ]------------
UBSAN: array-index-out-of-bounds in
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1895:8
index 29 is out of range for type 'stats_query_entry [19]'
CPU: 13 PID: 163 Comm: kworker/u96:1 Not tainted 6.9.0-060900rc7-generic
#202405052133
Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9,
BIOS P89 10/21/2019
Workqueue: bnx2x bnx2x_sp_task [bnx2x]
Call Trace:
<TASK>
dump_stack_lvl+0x76/0xa0
dump_stack+0x10/0x20
__ubsan_handle_out_of_bounds+0xcb/0x110
bnx2x_iov_adjust_stats_req+0x3c4/0x3d0 [bnx2x]
bnx2x_storm_stats_post.part.0+0x4a/0x330 [bnx2x]
? bnx2x_hw_stats_post+0x231/0x250 [bnx2x]
bnx2x_stats_start+0x44/0x70 [bnx2x]
bnx2x_stats_handle+0x149/0x350 [bnx2x]
bnx2x_attn_int_asserted+0x998/0x9b0 [bnx2x]
bnx2x_sp_task+0x491/0x5c0 [bnx2x]
process_one_work+0x18d/0x3f0
</TASK>
---[ end trace ]---
Pavel Skripkin [Thu, 20 Jun 2024 19:27:47 +0000 (22:27 +0300)]
bluetooth/hci: disallow setting handle bigger than HCI_CONN_HANDLE_MAX
Syzbot hit warning in hci_conn_del() caused by freeing handle that was
not allocated using ida allocator.
This is caused by handle bigger than HCI_CONN_HANDLE_MAX passed by
hci_le_big_sync_established_evt(), which makes code think it's unset
connection.
Add same check for handle upper bound as in hci_conn_set_handle() to
prevent warning.
Link: https://syzkaller.appspot.com/bug?extid=b2545b087a01a7319474 Reported-by: syzbot+b2545b087a01a7319474@syzkaller.appspotmail.com Fixes: 181a42edddf5 ("Bluetooth: Make handle of hci_conn be unique") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
1365 sk->sk_state = BT_CONFIG;
1366 }
1367 release_sock(sk);
1368 return 0;
1369 case BT_CONNECTED:
1370 if (test_bit(BT_SK_PA_SYNC,
Fixes: fbdc4bc47268 ("Bluetooth: ISO: Use defer setup to separate PA sync and BIG sync") Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Edward Adam Davis [Sat, 15 Jun 2024 01:45:54 +0000 (09:45 +0800)]
bluetooth/l2cap: sync sock recv cb and release
The problem occurs between the system call to close the sock and hci_rx_work,
where the former releases the sock and the latter accesses it without lock protection.
If hci_rx_work processes the data that needs to be received before the sock is
closed, then everything is normal; Otherwise, the work thread may access the
released sock when receiving data.
Add a chan mutex in the rx callback of the sock to achieve synchronization between
the sock release and recv cb.
Sock is dead, so set chan data to NULL, avoid others use invalid sock pointer.
Reported-and-tested-by: syzbot+b7f6f8c9303466e16c8a@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis <eadavis@qq.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Edward Adam Davis [Mon, 17 Jun 2024 11:09:37 +0000 (19:09 +0800)]
Bluetooth: Ignore too large handle values in BIG
hci_le_big_sync_established_evt is necessary to filter out cases where the
handle value is belonging to ida id range, otherwise ida will be erroneously
released in hci_conn_cleanup.
Fixes: 181a42edddf5 ("Bluetooth: Make handle of hci_conn be unique") Reported-by: syzbot+b2545b087a01a7319474@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=b2545b087a01a7319474 Signed-off-by: Edward Adam Davis <eadavis@qq.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Neeraj Sanjay Kale [Fri, 14 Jun 2024 08:20:39 +0000 (13:50 +0530)]
Bluetooth: btnxpuart: Enable Power Save feature on startup
This sets the default power save mode setting to enabled.
The power save feature is now stable and stress test issues, such as the
TX timeout error, have been resolved.
commit c7ee0bc8db32 ("Bluetooth: btnxpuart: Resolve TX timeout error in
power save stress test")
With this setting, the driver will send the vendor command to FW at
startup, to enable power save feature.
User can disable this feature using the following vendor command:
hcitool cmd 3f 23 03 00 00 (HCI_NXP_AUTO_SLEEP_MODE)
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tetsuo Handa [Mon, 10 Jun 2024 11:00:32 +0000 (20:00 +0900)]
Bluetooth: hci_core: cancel all works upon hci_unregister_dev()
syzbot is reporting that calling hci_release_dev() from hci_error_reset()
due to hci_dev_put() from hci_error_reset() can cause deadlock at
destroy_workqueue(), for hci_error_reset() is called from
hdev->req_workqueue which destroy_workqueue() needs to flush.
We need to make sure that hdev->{rx_work,cmd_work,tx_work} which are
queued into hdev->workqueue and hdev->{power_on,error_reset} which are
queued into hdev->req_workqueue are no longer running by the moment
Zijun Hu [Thu, 16 May 2024 13:31:34 +0000 (21:31 +0800)]
Bluetooth: qca: Fix BT enable failure again for QCA6390 after warm reboot
Commit 272970be3dab ("Bluetooth: hci_qca: Fix driver shutdown on closed
serdev") will cause below regression issue:
BT can't be enabled after below steps:
cold boot -> enable BT -> disable BT -> warm reboot -> BT enable failure
if property enable-gpios is not configured within DT|ACPI for QCA6390.
The commit is to fix a use-after-free issue within qca_serdev_shutdown()
by adding condition to avoid the serdev is flushed or wrote after closed
but also introduces this regression issue regarding above steps since the
VSC is not sent to reset controller during warm reboot.
Fixed by sending the VSC to reset controller within qca_serdev_shutdown()
once BT was ever enabled, and the use-after-free issue is also fixed by
this change since the serdev is still opened before it is flushed or wrote.
Verified by the reported machine Dell XPS 13 9310 laptop over below two
kernel commits:
commit e00fc2700a3f ("Bluetooth: btusb: Fix triggering coredump
implementation for QCA") of bluetooth-next tree.
commit b23d98d46d28 ("Bluetooth: btusb: Fix triggering coredump
implementation for QCA") of linus mainline tree.
Fixes: 272970be3dab ("Bluetooth: hci_qca: Fix driver shutdown on closed serdev") Cc: stable@vger.kernel.org Reported-by: Wren Turkal <wt@penguintechs.org> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218726 Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Tested-by: Wren Turkal <wt@penguintechs.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Luiz Augusto von Dentz [Thu, 6 Jun 2024 16:04:30 +0000 (12:04 -0400)]
Bluetooth: hci_event: Fix setting of unicast qos interval
qos->ucast interval reffers to the SDU interval, and should not
be set to the interval value reported by the LE CIS Established
event since the latter reffers to the ISO interval. These two
interval are not the same thing:
BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 6, Part G
Isochronous interval:
The time between two consecutive BIS or CIS events (designated
ISO_Interval in the Link Layer)
SDU interval:
The nominal time between two consecutive SDUs that are sent or
received by the upper layer.
So this instead uses the following formula from the spec to calculate
the resulting SDU interface:
BLUETOOTH CORE SPECIFICATION Version 5.4 | Vol 6, Part G
page 3075:
Link: https://github.com/bluez/bluez/issues/823 Fixes: 2be22f1941d5 ("Bluetooth: hci_event: Fix parsing of CIS Established Event") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Vijay Satija [Fri, 17 May 2024 09:54:47 +0000 (15:24 +0530)]
Bluetooth: btintel_pcie: Fix REVERSE_INULL issue reported by coverity
check pdata return of skb_pull_data, instead of data.
Fixes: c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport") Signed-off-by: Vijay Satija <vijay.satija@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Hector Martin [Wed, 15 May 2024 18:15:04 +0000 (18:15 +0000)]
Bluetooth: hci_bcm4377: Fix msgid release
We are releasing a single msgid, so the order argument to
bitmap_release_region must be zero.
Fixes: 8a06127602de ("Bluetooth: hci_bcm4377: Add new driver for BCM4377 PCIe boards") Cc: stable@vger.kernel.org Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Sven Peter <sven@svenpeter.dev> Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Sven Peter [Wed, 15 May 2024 18:02:58 +0000 (18:02 +0000)]
Bluetooth: Add quirk to ignore reserved PHY bits in LE Extended Adv Report
Some Broadcom controllers found on Apple Silicon machines abuse the
reserved bits inside the PHY fields of LE Extended Advertising Report
events for additional flags. Add a quirk to drop these and correctly
extract the Primary/Secondary_PHY field.
The following excerpt from a btmon trace shows a report received with
"Reserved" for "Primary PHY" on a 4388 controller:
> HCI Event: LE Meta Event (0x3e) plen 26
LE Extended Advertising Report (0x0d)
Num reports: 1
Entry 0
Event type: 0x2515
Props: 0x0015
Connectable
Directed
Use legacy advertising PDUs
Data status: Complete
Reserved (0x2500)
Legacy PDU Type: Reserved (0x2515)
Address type: Random (0x01)
Address: 00:00:00:00:00:00 (Static)
Primary PHY: Reserved
Secondary PHY: No packets
SID: no ADI field (0xff)
TX power: 127 dBm
RSSI: -60 dBm (0xc4)
Periodic advertising interval: 0.00 msec (0x0000)
Direct address type: Public (0x00)
Direct address: 00:00:00:00:00:00 (Apple, Inc.)
Data length: 0x00
Cc: stable@vger.kernel.org Fixes: 2e7ed5f5e69b ("Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync") Reported-by: Janne Grunau <j@jannau.net> Closes: https://lore.kernel.org/all/Zjz0atzRhFykROM9@robin Tested-by: Janne Grunau <j@jannau.net> Signed-off-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Leon Romanovsky [Thu, 27 Jun 2024 18:02:40 +0000 (21:02 +0300)]
net/mlx5e: Approximate IPsec per-SA payload data bytes count
ConnectX devices lack ability to count payload data byte size which is
needed for SA to return to libreswan for rekeying.
As a solution let's approximate that by decreasing headers size from
total size counted by flow steering. The calculation doesn't take into
account any other headers which can be in the packet (e.g. IP extensions).
Fixes: 5a6cddb89b51 ("net/mlx5e: Update IPsec per SA packets/bytes count") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Leon Romanovsky [Thu, 27 Jun 2024 18:02:39 +0000 (21:02 +0300)]
net/mlx5e: Present succeeded IPsec SA bytes and packet
IPsec SA statistics presents successfully decrypted and encrypted
packet and bytes, and not total handled by this SA. So update the
calculation logic to take into account failures.
Fixes: 6fb7f9408779 ("net/mlx5e: Connect mlx5 IPsec statistics with XFRM core") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jianbo Liu [Thu, 27 Jun 2024 18:02:38 +0000 (21:02 +0300)]
net/mlx5e: Add mqprio_rl cleanup and free in mlx5e_priv_cleanup()
In the cited commit, mqprio_rl cleanup and free are mistakenly removed
in mlx5e_priv_cleanup(), and it causes the leakage of host memory and
firmware SCHEDULING_ELEMENT objects while changing eswitch mode. So,
add them back.
Fixes: 0bb7228f7096 ("net/mlx5e: Fix mqprio_rl handling on devlink reload") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Chris Mi [Thu, 27 Jun 2024 18:02:37 +0000 (21:02 +0300)]
net/mlx5: E-switch, Create ingress ACL when needed
Currently, ingress acl is used for three features. It is created only
when vport metadata match and prio tag are enabled. But active-backup
lag mode also uses it. It is independent of vport metadata match and
prio tag. And vport metadata match can be disabled using the
following devlink command:
# devlink dev param set pci/0000:08:00.0 name esw_port_metadata \
value false cmode runtime
If ingress acl is not created, will hit panic when creating drop rule
for active-backup lag mode. If always create it, there will be about
5% performance degradation.
Fix it by creating ingress acl when needed. If esw_port_metadata is
true, ingress acl exists, then create drop rule using existing
ingress acl. If esw_port_metadata is false, create ingress acl and
then create drop rule.
Fixes: 1749c4c51c16 ("net/mlx5: E-switch, add drop rule support to ingress ACL") Signed-off-by: Chris Mi <cmi@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Jurgens [Thu, 27 Jun 2024 18:02:36 +0000 (21:02 +0300)]
net/mlx5: Use max_num_eqs_24b when setting max_io_eqs
Due a bug in the device max_num_eqs doesn't always reflect a written
value. As a result, setting max_io_eqs may not work but appear
successful. Instead write max_num_eqs_24b, which reflects correct
value.
Fixes: 93197c7c509d ("mlx5/core: Support max_io_eqs for a function") Signed-off-by: Daniel Jurgens <danielj@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Jurgens [Thu, 27 Jun 2024 18:02:35 +0000 (21:02 +0300)]
net/mlx5: Use max_num_eqs_24b capability if set
A new capability with more bits is added. If it's set use that value as
the maximum number of EQs available.
This cap is also writable by the vhca_resource_manager to allow limiting
the number of EQs available to SFs and VFs.
Fixes: 93197c7c509d ("mlx5/core: Support max_io_eqs for a function") Signed-off-by: Daniel Jurgens <danielj@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Reviewed-by: William Tu <witu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Jurgens [Thu, 27 Jun 2024 18:02:34 +0000 (21:02 +0300)]
net/mlx5: IFC updates for changing max EQs
Expose new capability to support changing the number of EQs available
to other functions.
Fixes: 93197c7c509d ("mlx5/core: Support max_io_eqs for a function") Signed-off-by: Daniel Jurgens <danielj@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Reviewed-by: William Tu <witu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Neal Cardwell [Thu, 27 Jun 2024 02:42:27 +0000 (22:42 -0400)]
UPSTREAM: tcp: fix DSACK undo in fast recovery to call tcp_try_to_open()
In some production workloads we noticed that connections could
sometimes close extremely prematurely with ETIMEDOUT after
transmitting only 1 TLP and RTO retransmission (when we would normally
expect roughly tcp_retries2 = TCP_RETR2 = 15 RTOs before a connection
closes with ETIMEDOUT).
From tracing we determined that these workloads can suffer from a
scenario where in fast recovery, after some retransmits, a DSACK undo
can happen at a point where the scoreboard is totally clear (we have
retrans_out == sacked_out == lost_out == 0). In such cases, calling
tcp_try_keep_open() means that we do not execute any code path that
clears tp->retrans_stamp to 0. That means that tp->retrans_stamp can
remain erroneously set to the start time of the undone fast recovery,
even after the fast recovery is undone. If minutes or hours elapse,
and then a TLP/RTO/RTO sequence occurs, then the start_ts value in
retransmits_timed_out() (which is from tp->retrans_stamp) will be
erroneously ancient (left over from the fast recovery undone via
DSACKs). Thus this ancient tp->retrans_stamp value can cause the
connection to die very prematurely with ETIMEDOUT via
tcp_write_err().
The fix: we change DSACK undo in fast recovery (TCP_CA_Recovery) to
call tcp_try_to_open() instead of tcp_try_keep_open(). This ensures
that if no retransmits are in flight at the time of DSACK undo in fast
recovery then we properly zero retrans_stamp. Note that calling
tcp_try_to_open() is more consistent with other loss recovery
behavior, since normal fast recovery (CA_Recovery) and RTO recovery
(CA_Loss) both normally end when tp->snd_una meets or exceeds
tp->high_seq and then in tcp_fastretrans_alert() the "default" switch
case executes tcp_try_to_open(). Also note that by inspection this
change to call tcp_try_to_open() implies at least one other nice bug
fix, where now an ECE-marked DSACK that causes an undo will properly
invoke tcp_enter_cwr() rather than ignoring the ECE mark.
Fixes: c7d9d6a185a7 ("tcp: undo on DSACK during recovery") Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the definition of BSS_CHANGED_UNSOL_BCAST_PROBE_RESP so that
not all higher bits get set, 1<<31 is a signed variable, so when
we do
u64 changed = BSS_CHANGED_UNSOL_BCAST_PROBE_RESP;
we get sign expansion, so the value is 0xffff'ffff'8000'0000 and
that's clearly not desired. Use BIT_ULL() to make it unsigned as
well as the right type for the change flags.
Marek Vasut [Wed, 26 Jun 2024 03:06:17 +0000 (05:06 +0200)]
net: phy: phy_device: Fix PHY LED blinking code comment
Fix copy-paste error in the code comment. The code refers to
LED blinking configuration, not brightness configuration. It
was likely copied from comment above this one which does
refer to brightness configuration.
Fixes: 4e901018432e ("net: phy: phy_device: Call into the PHY driver to set LED blinking") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240626030638.512069-1-marex@denx.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 27 Jun 2024 18:57:40 +0000 (11:57 -0700)]
Merge tag 'wireless-2024-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just a few changes:
- maintainers: Larry Finger sadly passed away
- maintainers: ath trees are in their group now
- TXQ FQ quantum configuration fix
- TI wl driver: work around stuck FW in AP mode
- mac80211: disable softirqs in some new code
needing that
* tag 'wireless-2024-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
MAINTAINERS: wifi: update ath.git location
MAINTAINERS: Remembering Larry Finger
wifi: mac80211: disable softirqs for queued frame handling
wifi: cfg80211: restrict NL80211_ATTR_TXQ_QUANTUM values
wifi: wlcore: fix wlcore AP mode
====================
Linus Torvalds [Thu, 27 Jun 2024 17:05:35 +0000 (10:05 -0700)]
Merge tag 'net-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, bpf and netfilter.
There are a bunch of regressions addressed here, but hopefully nothing
spectacular. We are still waiting the driver fix from Intel, mentioned
by Jakub in the previous networking pull.
Current release - regressions:
- core: add softirq safety to netdev_rename_lock
- tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed
TFO
- batman-adv: fix RCU race at module unload time
Previous releases - regressions:
- openvswitch: get related ct labels from its master if it is not
confirmed
- eth: mlxsw: fix memory corruptions on spectrum-4 systems
- eth: ionic: use dev_consume_skb_any outside of napi
Previous releases - always broken:
- netfilter: fully validate NFT_DATA_VALUE on store to data registers
- unix: several fixes for OoB data
- tcp: fix race for duplicate reqsk on identical SYN
- bpf:
- fix may_goto with negative offset
- fix the corner case with may_goto and jump to the 1st insn
- fix overrunning reservations in ringbuf
- can:
- j1939: recover socket queue on CAN bus error during BAM
transmission
- mcp251xfd: fix infinite loop when xmit fails
- dsa: microchip: monitor potential faults in half-duplex mode
- eth: vxlan: pull inner IP header in vxlan_xmit_one()
- eth: ionic: fix kernel panic due to multi-buffer handling
Misc:
- selftest: unix tests refactor and a lot of new cases added"
* tag 'net-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
net: mana: Fix possible double free in error handling path
selftest: af_unix: Check SIOCATMARK after every send()/recv() in msg_oob.c.
af_unix: Fix wrong ioctl(SIOCATMARK) when consumed OOB skb is at the head.
selftest: af_unix: Check EPOLLPRI after every send()/recv() in msg_oob.c
selftest: af_unix: Check SIGURG after every send() in msg_oob.c
selftest: af_unix: Add SO_OOBINLINE test cases in msg_oob.c
af_unix: Don't stop recv() at consumed ex-OOB skb.
selftest: af_unix: Add non-TCP-compliant test cases in msg_oob.c.
af_unix: Don't stop recv(MSG_DONTWAIT) if consumed OOB skb is at the head.
af_unix: Stop recv(MSG_PEEK) at consumed OOB skb.
selftest: af_unix: Add msg_oob.c.
selftest: af_unix: Remove test_unix_oob.c.
tracing/net_sched: NULL pointer dereference in perf_trace_qdisc_reset()
netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers
net: usb: qmi_wwan: add Telit FN912 compositions
tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed TFO
ionic: use dev_consume_skb_any outside of napi
net: dsa: microchip: fix wrong register write when masking interrupt
Fix race for duplicate reqsk on identical SYN
ibmvnic: Add tx check to prevent skb leak
...
Linus Torvalds [Thu, 27 Jun 2024 16:34:09 +0000 (09:34 -0700)]
Merge tag 'sound-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This became bigger than usual, as it receives a pile of pending ASoC
fixes. Most of changes are for device-specific issues while there are
a few core fixes that are all rather trivial:
- DMA-engine sync fixes
- Continued MIDI2 conversion fixes
- Various ASoC Intel SOF fixes
- A series of ASoC topology fixes for memory handling
- AMD ACP fix, curing a recent regression, too
- Platform / codec-specific fixes for mediatek, atmel, realtek, etc"
* tag 'sound-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (40 commits)
ASoC: rt5645: fix issue of random interrupt from push-button
ALSA: seq: Fix missing MSB in MIDI2 SPP conversion
ASoC: amd: yc: Fix non-functional mic on ASUS M5602RA
ALSA: hda/realtek: fix mute/micmute LEDs don't work for EliteBook 645/665 G11.
ALSA: hda/realtek: Fix conflicting quirk for PCI SSID 17aa:3820
ALSA: dmaengine_pcm: terminate dmaengine before synchronize
ALSA: hda/relatek: Enable Mute LED on HP Laptop 15-gw0xxx
ALSA: PCM: Allow resume only for suspended streams
ALSA: seq: Fix missing channel at encoding RPN/NRPN MIDI2 messages
ASoC: mediatek: mt8195: Add platform entry for ETDM1_OUT_BE dai link
ASoC: fsl-asoc-card: set priv->pdev before using it
ASoC: amd: acp: move chip->flag variable assignment
ASoC: amd: acp: remove i2s configuration check in acp_i2s_probe()
ASoC: amd: acp: add a null check for chip_pdev structure
ASoC: Intel: soc-acpi: mtl: fix speaker no sound on Dell SKU 0C64
ASoC: q6apm-lpass-dai: close graph on prepare errors
ASoC: cs35l56: Disconnect ASP1 TX sources when ASP1 DAI is hooked up
ASoC: topology: Fix route memory corruption
ASoC: rt722-sdca-sdw: add debounce time for type detection
ASoC: SOF: sof-audio: Skip unprepare for in-use widgets on error rollback
...
Paolo Abeni [Thu, 27 Jun 2024 11:00:50 +0000 (13:00 +0200)]
Merge tag 'nf-24-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains two Netfilter fixes for net:
Patch #1 fixes CONFIG_SYSCTL=n for a patch coming in the previous PR
to move the sysctl toggle to enable SRv6 netfilter hooks from
nf_conntrack to the core, from Jianguo Wu.
Patch #2 fixes a possible pointer leak to userspace due to insufficient
validation of NFT_DATA_VALUE.
Linus found this pointer leak to userspace via zdi-disclosures@ and
forwarded the notice to Netfilter maintainers, he appears as reporter
because whoever found this issue never approached Netfilter
maintainers neither via security@ nor in private.
netfilter pull request 24-06-27
* tag 'nf-24-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers
netfilter: fix undefined reference to 'netfilter_lwtunnel_*' when CONFIG_SYSCTL=n
====================
Ma Ke [Tue, 25 Jun 2024 13:03:14 +0000 (21:03 +0800)]
net: mana: Fix possible double free in error handling path
When auxiliary_device_add() returns error and then calls
auxiliary_device_uninit(), callback function adev_release
calls kfree(madev). We shouldn't call kfree(madev) again
in the error handling path. Set 'madev' to NULL.
Kuniyuki Iwashima [Tue, 25 Jun 2024 01:36:44 +0000 (18:36 -0700)]
af_unix: Fix wrong ioctl(SIOCATMARK) when consumed OOB skb is at the head.
Even if OOB data is recv()ed, ioctl(SIOCATMARK) must return 1 when the
OOB skb is at the head of the receive queue and no new OOB data is queued.
Without fix:
# RUN msg_oob.no_peek.oob ...
# msg_oob.c:305:oob:Expected answ[0] (0) == oob_head (1)
# oob: Test terminated by assertion
# FAIL msg_oob.no_peek.oob
not ok 2 msg_oob.no_peek.oob
With fix:
# RUN msg_oob.no_peek.oob ...
# OK msg_oob.no_peek.oob
ok 2 msg_oob.no_peek.oob
Kuniyuki Iwashima [Tue, 25 Jun 2024 01:36:42 +0000 (18:36 -0700)]
selftest: af_unix: Check SIGURG after every send() in msg_oob.c
When data is sent with MSG_OOB, SIGURG is sent to a process if the
receiver socket has set its owner to the process by ioctl(FIOSETOWN)
or fcntl(F_SETOWN).
This patch adds SIGURG check after every send(MSG_OOB) call.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now the consumed OOB skb stays at the head of recvq to return a correct
value for ioctl(SIOCATMARK), which is broken now and fixed by a later
patch.
Then, if peer issues recv() with MSG_DONTWAIT, manage_oob() returns NULL,
so recv() ends up with -EAGAIN.
>>> c2.setblocking(False) # This causes -EAGAIN even with available data
>>> c2.recv(5)
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
BlockingIOError: [Errno 11] Resource temporarily unavailable
However, next recv() will return the following available data, "world".
>>> c2.recv(5)
b'world'
When the consumed OOB skb is at the head of the queue, we need to fetch
the next skb to fix the weird behaviour.
Note that the issue does not happen without MSG_DONTWAIT because we can
retry after manage_oob().
This patch also adds a test case that covers the issue.
Without fix:
# RUN msg_oob.no_peek.ex_oob_break ...
# msg_oob.c:134:ex_oob_break:AF_UNIX :Resource temporarily unavailable
# msg_oob.c:135:ex_oob_break:Expected:ld
# msg_oob.c:137:ex_oob_break:Expected ret[0] (-1) == expected_len (2)
# ex_oob_break: Test terminated by assertion
# FAIL msg_oob.no_peek.ex_oob_break
not ok 8 msg_oob.no_peek.ex_oob_break
With fix:
# RUN msg_oob.no_peek.ex_oob_break ...
# OK msg_oob.no_peek.ex_oob_break
ok 8 msg_oob.no_peek.ex_oob_break
Yunseong Kim [Mon, 24 Jun 2024 17:33:23 +0000 (02:33 +0900)]
tracing/net_sched: NULL pointer dereference in perf_trace_qdisc_reset()
In the TRACE_EVENT(qdisc_reset) NULL dereference occurred from
qdisc->dev_queue->dev <NULL> ->name
This situation simulated from bunch of veths and Bluetooth disconnection
and reconnection.
During qdisc initialization, qdisc was being set to noop_queue.
In veth_init_queue, the initial tx_num was reduced back to one,
causing the qdisc reset to be called with noop, which led to the kernel
panic.
I've attached the GitHub gist link that C converted syz-execprogram
source code and 3 log of reproduced vmcore-dmesg.
However, without our patch applied, I tested upstream 6.10.0-rc3 kernel
using the qdisc_reset event and the ip command on my qemu virtual machine.
This 2 commands makes always kernel panic.
Linux version: 6.10.0-rc3
[ 0.000000] Linux version 6.10.0-rc3-00164-g44ef20baed8e-dirty
(paran@fedora) (gcc (GCC) 14.1.1 20240522 (Red Hat 14.1.1-4), GNU ld
version 2.41-34.fc40) #20 SMP PREEMPT Sat Jun 15 16:51:25 KST 2024
Yeoreum and I don't know if the patch we wrote will fix the underlying
cause, but we think that priority is to prevent kernel panic happening.
So, we're sending this patch.
Linus Torvalds [Thu, 27 Jun 2024 00:51:39 +0000 (17:51 -0700)]
Merge tag 'mm-hotfixes-stable-2024-06-26-17-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"13 hotfixes, 7 are cc:stable.
All are MM related apart from a MAINTAINERS update. There is no
identifiable theme here - just singleton patches in various places"
* tag 'mm-hotfixes-stable-2024-06-26-17-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/memory: don't require head page for do_set_pmd()
mm/page_alloc: Separate THP PCP into movable and non-movable categories
nfs: drop the incorrect assertion in nfs_swap_rw()
mm/migrate: make migrate_pages_batch() stats consistent
MAINTAINERS: TPM DEVICE DRIVER: update the W-tag
selftests/mm:fix test_prctl_fork_exec return failure
mm: convert page type macros to enum
ocfs2: fix DIO failure due to insufficient transaction credits
kasan: fix bad call to unpoison_slab_object
mm: handle profiling for fake memory allocations during compaction
mm/slab: fix 'variable obj_exts set but not used' warning
/proc/pid/smaps: add mseal info for vma
mm: fix incorrect vbq reference in purge_fragmented_block
Pablo Neira Ayuso [Wed, 26 Jun 2024 21:15:38 +0000 (23:15 +0200)]
netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers
register store validation for NFT_DATA_VALUE is conditional, however,
the datatype is always either NFT_DATA_VALUE or NFT_DATA_VERDICT. This
only requires a new helper function to infer the register type from the
set datatype so this conditional check can be removed. Otherwise,
pointer to chain object can be leaked through the registers.
Linus Torvalds [Wed, 26 Jun 2024 22:01:33 +0000 (15:01 -0700)]
Merge tag 'wq-for-6.10-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
"Two patches to fix kworker name formatting"
* tag 'wq-for-6.10-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Increase worker desc's length to 32
workqueue: Refactor worker ID formatting and make wq_worker_comm() use full ID string
Takashi Iwai [Wed, 26 Jun 2024 20:02:55 +0000 (22:02 +0200)]
Merge tag 'asoc-fix-v6.10-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.10
A relatively large batch of updates, largely due to the long interval
since I last sent fixes due to various travel and holidays. There's a
lot of driver specific fixes and quirks in here, none of them too major,
and also some fixes for recently introduced memory safety issues in the
topology code.
Kalle Valo [Wed, 26 Jun 2024 10:26:32 +0000 (13:26 +0300)]
MAINTAINERS: wifi: update ath.git location
ath.git tree has moved to a new location. The old location will be an alias to
the new location and will work at least until end of 2024, but best to update
git trees already now.
Kalle Valo [Tue, 25 Jun 2024 10:39:29 +0000 (13:39 +0300)]
MAINTAINERS: Remembering Larry Finger
We got sad news that Larry is not with us anymore. He was a long time
Linux developer, his first commit was back in 2005 and he has
maintained several wireless drivers over the years. He was known for
patiently supporting Linux users with all sorts of problems they had.
Larry's work helped so many people around the world and I always
enjoyed working with him, even though I sadly never met him.
Takashi Iwai [Wed, 26 Jun 2024 14:51:13 +0000 (16:51 +0200)]
ALSA: seq: Fix missing MSB in MIDI2 SPP conversion
The conversion of SPP to MIDI2 UMP called a wrong function, and the
secondary argument wasn't taken. As a result, MSB of SPP was always
zero. Fix to call the right function.
Johannes Berg [Wed, 26 Jun 2024 07:15:59 +0000 (09:15 +0200)]
wifi: mac80211: disable softirqs for queued frame handling
As noticed by syzbot, calling ieee80211_handle_queued_frames()
(and actually handling frames there) requires softirqs to be
disabled, since we call into the RX code. Fix that in the case
of cleaning up frames left over during shutdown.
Takashi Iwai [Tue, 25 Jun 2024 15:52:12 +0000 (17:52 +0200)]
ALSA: hda/realtek: Fix conflicting quirk for PCI SSID 17aa:3820
The recent fix for Lenovo IdeaPad 330-17IKB replaced the quirk entry,
and this eventually breaks the existing quirk for Lenovo Yoga Duet 7
13ITL6 equipped with the same PCI SSID 17aa:3820.
For applying a proper quirk for each model, check the codec SSID
additionally. Fortunately Yoga Duet has a different codec SSID,
0x17aa3802.
(Interestingly, 17aa:3802 has another conflict of SSID between another
Yoga model vs 14IRP8 which we had to work around similarly.)
Neal Cardwell [Mon, 24 Jun 2024 14:43:23 +0000 (14:43 +0000)]
tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed TFO
Testing determined that the recent commit 9e046bb111f1 ("tcp: clear
tp->retrans_stamp in tcp_rcv_fastopen_synack()") has a race, and does
not always ensure retrans_stamp is 0 after a TFO payload retransmit.
If transmit completion for the SYN+data skb happens after the client
TCP stack receives the SYNACK (which sometimes happens), then
retrans_stamp can erroneously remain non-zero for the lifetime of the
connection, causing a premature ETIMEDOUT later.
Testing and tracing showed that the buggy scenario is the following
somewhat tricky sequence:
+ Client attempts a TFO handshake. tcp_send_syn_data() sends SYN + TFO
cookie + data in a single packet in the syn_data skb. It hands the
syn_data skb to tcp_transmit_skb(), which makes a clone. Crucially,
it then reuses the same original (non-clone) syn_data skb,
transforming it by advancing the seq by one byte and removing the
FIN bit, and enques the resulting payload-only skb in the
sk->tcp_rtx_queue.
+ Client sets retrans_stamp to the start time of the three-way
handshake.
+ Cookie mismatches or server has TFO disabled, and server only ACKs
SYN.
+ tcp_ack() sees SYN is acked, tcp_clean_rtx_queue() clears
retrans_stamp.
+ Since the client SYN was acked but not the payload, the TFO failure
code path in tcp_rcv_fastopen_synack() tries to retransmit the
payload skb. However, in some cases the transmit completion for the
clone of the syn_data (which had SYN + TFO cookie + data) hasn't
happened. In those cases, skb_still_in_host_queue() returns true
for the retransmitted TFO payload, because the clone of the syn_data
skb has not had its tx completetion.
+ Because skb_still_in_host_queue() finds skb_fclone_busy() is true,
it sets the TSQ_THROTTLED bit and the retransmit does not happen in
the tcp_rcv_fastopen_synack() call chain.
+ The tcp_rcv_fastopen_synack() code next implicitly assumes the
retransmit process is finished, and sets retrans_stamp to 0 to clear
it, but this is later overwritten (see below).
+ Later, upon tx completion, tcp_tsq_write() calls
tcp_xmit_retransmit_queue(), which puts the retransmit in flight and
sets retrans_stamp to a non-zero value.
+ The client receives an ACK for the retransmitted TFO payload data.
+ Since we're in CA_Open and there are no dupacks/SACKs/DSACKs/ECN to
make tcp_ack_is_dubious() true and make us call
tcp_fastretrans_alert() and reach a code path that clears
retrans_stamp, retrans_stamp stays nonzero.
+ Later, if there is a TLP, RTO, RTO sequence, then the connection
will suffer an early ETIMEDOUT due to the erroneously ancient
retrans_stamp.
The fix: this commit refactors the code to have
tcp_rcv_fastopen_synack() retransmit by reusing the relevant parts of
tcp_simple_retransmit() that enter CA_Loss (without changing cwnd) and
call tcp_xmit_retransmit_queue(). We have tcp_simple_retransmit() and
tcp_rcv_fastopen_synack() share code in this way because in both cases
we get a packet indicating non-congestion loss (MTU reduction or TFO
failure) and thus in both cases we want to retransmit as many packets
as cwnd allows, without reducing cwnd. And given that retransmits will
set retrans_stamp to a non-zero value (and may do so in a later
calling context due to TSQ), we also want to enter CA_Loss so that we
track when all retransmitted packets are ACked and clear retrans_stamp
when that happens (to ensure later recurring RTOs are using the
correct retrans_stamp and don't declare ETIMEDOUT prematurely).
Fixes: 9e046bb111f1 ("tcp: clear tp->retrans_stamp in tcp_rcv_fastopen_synack()") Fixes: a7abf3cd76e1 ("tcp: consider using standard rtx logic in tcp_rcv_fastopen_synack()") Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Link: https://patch.msgid.link/20240624144323.2371403-1-ncardwell.sw@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shannon Nelson [Mon, 24 Jun 2024 17:50:15 +0000 (10:50 -0700)]
ionic: use dev_consume_skb_any outside of napi
If we're not in a NAPI softirq context, we need to be careful
about how we call napi_consume_skb(), specifically we need to
call it with budget==0 to signal to it that we're not in a
safe context.
This was found while running some configuration stress testing
of traffic and a change queue config loop running, and this
curious note popped out:
I found that ionic_tx_clean() calls napi_consume_skb() which calls
napi_skb_cache_put(), but before that last call is the note
/* Zero budget indicate non-NAPI context called us, like netpoll */
and
DEBUG_NET_WARN_ON_ONCE(!in_softirq());
Those are pretty big hints that we're doing it wrong. We can pass a
context hint down through the calls to let ionic_tx_clean() know what
we're doing so it can call napi_consume_skb() correctly.
Tristram Ha [Fri, 21 Jun 2024 22:34:22 +0000 (15:34 -0700)]
net: dsa: microchip: fix wrong register write when masking interrupt
The switch global port interrupt mask, REG_SW_PORT_INT_MASK__4, is
defined as 0x001C in ksz9477_reg.h. The designers used 32-bit value in
anticipation for increase of port count in future product but currently
the maximum port count is 7 and the effective value is 0x7F in register
0x001F. Each port has its own interrupt mask and is defined as 0x#01F.
It uses only 4 bits for different interrupts.
The developer who implemented the current interrupt mechanism in the
switch driver noticed there are similarities between the mechanism to
mask port interrupts in global interrupt and individual interrupts in
each port and so used the same code to handle these interrupts. He
updated the code to use the new macro REG_SW_PORT_INT_MASK__1 which is
defined as 0x1F in ksz_common.h but he forgot to update the 32-bit write
to 8-bit as now the mask registers are 0x1F and 0x#01F.
In addition all KSZ switches other than the KSZ9897/KSZ9893 and LAN937X
families use only 8-bit access and so this common code will eventually
be changed to accommodate them.
Shengjiu Wang [Thu, 20 Jun 2024 02:40:18 +0000 (10:40 +0800)]
ALSA: dmaengine_pcm: terminate dmaengine before synchronize
When dmaengine supports pause function, in suspend state,
dmaengine_pause() is called instead of dmaengine_terminate_async(),
In end of playback stream, the runtime->state will go to
SNDRV_PCM_STATE_DRAINING, if system suspend & resume happen
at this time, application will not resume playback stream, the
stream will be closed directly, the dmaengine_terminate_async()
will not be called before the dmaengine_synchronize(), which
violates the call sequence for dmaengine_synchronize().
This behavior also happens for capture streams, but there is no
SNDRV_PCM_STATE_DRAINING state for capture. So use
dmaengine_tx_status() to check the DMA status if the status is
DMA_PAUSED, then call dmaengine_terminate_async() to terminate
dmaengine before dmaengine_synchronize().
projects / nvme.git / log