As Christian Brauner pointed out [1]: the root cause is f2fs sets
SB_RDONLY flag in internal function, rather than setting the flag
covered w/ sb->s_umount semaphore via remount procedure, then below
race condition causes this bug:
Since f2fs has almost the same logic as ext4 [2] when handling critical
error in filesystem if it mounts w/ errors=remount-ro option:
- set CP_ERROR_FLAG flag which indicates filesystem is stopped
- record errors to superblock
- set SB_RDONLY falg
Once we set CP_ERROR_FLAG flag, all writable interfaces can detect the
flag and stop any further updates on filesystem. So, it is safe to not
set SB_RDONLY flag, let's remove the logic and keep in line w/ ext4 [3].
Fixes: b62e71be2110 ("f2fs: support errors=remount-ro|continue|panic mountoption") Reported-by: syzbot+20d7e439f76bbbd863a7@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/000000000000b90a8e061e21d12f@google.com/ Cc: Jan Kara <jack@suse.cz> Cc: Christian Brauner <brauner@kernel.org> Signed-off-by: Chao Yu <chao@kernel.org> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs: add valid block ratio not to do excessive GC for one time GC
We need to introduce a valid block ratio threshold not to trigger
excessive GC for zoned deivces. The initial value of it is 95%. So, F2FS
will stop the thread from intiating GC for sections having valid blocks
exceeding the ratio.
We can control the scanning window granularity for GC migration. For
more frequent scanning and GC on zoned devices, we need a fine grained
control knob for it.
Daejun Park [Thu, 5 Sep 2024 05:24:33 +0000 (14:24 +0900)]
f2fs: avoid unused block when dio write in LFS mode
This patch addresses the problem that when using LFS mode, unused blocks
may occur in f2fs_map_blocks() during block allocation for dio writes.
If a new section is allocated during block allocation, it will not be
included in the map struct by map_is_mergeable() if the LBA of the
allocated block is not contiguous. However, the block already allocated
in this process will remain unused due to the LFS mode.
This patch avoids the possibility of unused blocks by escaping
f2fs_map_blocks() when allocating the last block in a section.
Signed-off-by: Daejun Park <daejun7.park@samsung.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs: fix to check atomic_file in f2fs ioctl interfaces
Some f2fs ioctl interfaces like f2fs_ioc_set_pin_file(),
f2fs_move_file_range(), and f2fs_defragment_range() missed to
check atomic_write status, which may cause potential race issue,
fix it.
Cc: stable@vger.kernel.org Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Online repaire on corrupted directory in f2fs_lookup() can generate
dirty data/meta while racing w/ readonly remount, it may leave dirty
inode after filesystem becomes readonly, however, checkpoint() will
skips flushing dirty inode in a state of readonly mode, result in
above panic.
Let's get rid of online repaire in f2fs_lookup(), and leave the work
to fsck.f2fs.
Yeongjin Gil [Mon, 19 Aug 2024 08:34:30 +0000 (17:34 +0900)]
f2fs: compress: don't redirty sparse cluster during {,de}compress
In f2fs_do_write_data_page, when the data block is NULL_ADDR, it skips
writepage considering that it has been already truncated.
This results in an infinite loop as the PAGECACHE_TAG_TOWRITE tag is not
cleared during the writeback process for a compressed file including
NULL_ADDR in compress_mode=user.
Shin'ichiro Kawasaki [Fri, 16 Aug 2024 04:07:03 +0000 (13:07 +0900)]
f2fs: check discard support for conventional zones
As the helper function f2fs_bdev_support_discard() shows, f2fs checks if
the target block devices support discard by calling
bdev_max_discard_sectors() and bdev_is_zoned(). This check works well
for most cases, but it does not work for conventional zones on zoned
block devices. F2fs assumes that zoned block devices support discard,
and calls __submit_discard_cmd(). When __submit_discard_cmd() is called
for sequential write required zones, it works fine since
__submit_discard_cmd() issues zone reset commands instead of discard
commands. However, when __submit_discard_cmd() is called for
conventional zones, __blkdev_issue_discard() is called even when the
devices do not support discard.
The inappropriate __blkdev_issue_discard() call was not a problem before
the commit 30f1e7241422 ("block: move discard checks into the ioctl
handler") because __blkdev_issue_discard() checked if the target devices
support discard or not. If not, it returned EOPNOTSUPP. After the
commit, __blkdev_issue_discard() no longer checks it. It always returns
zero and sets NULL to the given bio pointer. This NULL pointer triggers
f2fs_bug_on() in __submit_discard_cmd(). The BUG is recreated with the
commands below at the umount step, where /dev/nullb0 is a zoned null_blk
with 5GB total size, 128MB zone size and 10 conventional zones.
$ mkfs.f2fs -f -m /dev/nullb0
$ mount /dev/nullb0 /mnt
$ for ((i=0;i<5;i++)); do dd if=/dev/zero of=/mnt/test bs=65536 count=1600 conv=fsync; done
$ umount /mnt
To fix the BUG, avoid the inappropriate __blkdev_issue_discard() call.
When discard is requested for conventional zones, check if the device
supports discard or not. If not, return EOPNOTSUPP.
Fixes: 30f1e7241422 ("block: move discard checks into the ioctl handler") Cc: stable@vger.kernel.org Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Chao Yu <chao@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We will call f2fs_do_shutdown() in two paths:
- for f2fs_ioc_shutdown() path, we should grab sb->s_umount semaphore
for fixing.
- for f2fs_shutdown() path, it's safe since caller has already grabbed
sb->s_umount semaphore.
Chao Yu [Mon, 12 Aug 2024 14:12:42 +0000 (22:12 +0800)]
f2fs: fix to wait page writeback before setting gcing flag
Soft IRQ Thread
- f2fs_write_end_io
- f2fs_defragment_range
- set_page_private_gcing
- type = WB_DATA_TYPE(page, false);
: assign type w/ F2FS_WB_CP_DATA
due to page_private_gcing() is true
- dec_page_count() w/ wrong type
- end_page_writeback()
Value of F2FS_WB_CP_DATA reference count may become negative under above
race condition, the root cause is we missed to wait page writeback before
setting gcing page private flag, let's fix it.
Fixes: 2d1fe8a86bf5 ("f2fs: fix to tag gcing flag on page during file defragment") Fixes: 4961acdd65c9 ("f2fs: fix to tag gcing flag on page during block migration") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Yeongjin Gil [Tue, 13 Aug 2024 07:32:44 +0000 (16:32 +0900)]
f2fs: Create COW inode from parent dentry for atomic write
The i_pino in f2fs_inode_info has the previous parent's i_ino when inode
was renamed, which may cause f2fs_ioc_start_atomic_write to fail.
If file_wrong_pino is true and i_nlink is 1, then to find a valid pino,
we should refer to the dentry from inode.
To resolve this issue, let's get parent inode using parent dentry
directly.
Fixes: 3db1de0e582c ("f2fs: change the current atomic write way") Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by: Sunmin Jeong <s_min.jeong@samsung.com> Signed-off-by: Yeongjin Gil <youngjin.gil@samsung.com> Reviewed-by: Daeho Jeong <daehojeong@google.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jann Horn [Tue, 6 Aug 2024 14:07:16 +0000 (16:07 +0200)]
f2fs: Require FMODE_WRITE for atomic write ioctls
The F2FS ioctls for starting and committing atomic writes check for
inode_owner_or_capable(), but this does not give LSMs like SELinux or
Landlock an opportunity to deny the write access - if the caller's FSUID
matches the inode's UID, inode_owner_or_capable() immediately returns true.
There are scenarios where LSMs want to deny a process the ability to write
particular files, even files that the FSUID of the process owns; but this
can currently partially be bypassed using atomic write ioctls in two ways:
- F2FS_IOC_START_ATOMIC_REPLACE + F2FS_IOC_COMMIT_ATOMIC_WRITE can
truncate an inode to size 0
- F2FS_IOC_START_ATOMIC_WRITE + F2FS_IOC_ABORT_ATOMIC_WRITE can revert
changes another process concurrently made to a file
Fix it by requiring FMODE_WRITE for these operations, just like for
F2FS_IOC_MOVE_RANGE. Since any legitimate caller should only be using these
ioctls when intending to write into the file, that seems unlikely to break
anything.
Fixes: 88b88a667971 ("f2fs: support atomic writes") Cc: stable@vger.kernel.org Signed-off-by: Jann Horn <jannh@google.com> Reviewed-by: Chao Yu <chao@kernel.org> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Zijie Wang [Mon, 1 Apr 2024 13:24:08 +0000 (21:24 +0800)]
f2fs: use f2fs_get_node_page when write inline data
We just need inode page when write inline data, use
f2fs_get_node_page() to get it instead of using dnode_of_data,
which can eliminate unnecessary struct use.
Signed-off-by: Zijie Wang <wangzijie1@honor.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
liujinbao1 [Wed, 21 Feb 2024 07:32:49 +0000 (15:32 +0800)]
f2fs: sysfs: support atgc_enabled
When we add "atgc" to the fstab table, ATGC is not immediately enabled.
There is a 7-day time threshold, and we can use "atgc_enabled" to
show whether ATGC is enabled.
Since Commit dd291d77cc90eb6a86e9860ba8e6e38eebd57d12 ("block:
Introduce zone write plugging") has enabled the block layer to
handle this order issue, there is no need to use flush command.
Chao Yu [Thu, 27 Jun 2024 07:15:21 +0000 (15:15 +0800)]
f2fs: fix to avoid racing in between read and OPU dio write
If lfs mode is on, buffered read may race w/ OPU dio write as below,
it may cause buffered read hits unwritten data unexpectly, and for
dio read, the race condition exists as well.
Thread A Thread B
- f2fs_file_write_iter
- f2fs_dio_write_iter
- __iomap_dio_rw
- f2fs_iomap_begin
- f2fs_map_blocks
- __allocate_data_block
- allocated blkaddr #x
- iomap_dio_submit_bio
- f2fs_file_read_iter
- filemap_read
- f2fs_read_data_folio
- f2fs_mpage_readpages
- f2fs_map_blocks
: get blkaddr #x
- f2fs_submit_read_bio
IRQ
- f2fs_read_end_io
: read IO on blkaddr #x complete
IRQ
- iomap_dio_bio_end_io
: direct write IO on blkaddr #x complete
In LFS mode, if there is inflight dio, let's wait for its completion,
this policy won't cover all race cases, however it is a tradeoff which
avoids abusing lock around IO paths.
Fixes: f847c699cff3 ("f2fs: allow out-place-update for direct IO in LFS mode") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Chao Yu [Thu, 27 Jun 2024 07:17:11 +0000 (15:17 +0800)]
f2fs: fix to wait dio completion
It should wait all existing dio write IOs before block removal,
otherwise, previous direct write IO may overwrite data in the
block which may be reused by other inode.
Cc: stable@vger.kernel.org Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Chao Yu [Wed, 26 Jun 2024 01:47:27 +0000 (09:47 +0800)]
f2fs: reduce expensive checkpoint trigger frequency
We may trigger high frequent checkpoint for below case:
1. mkdir /mnt/dir1; set dir1 encrypted
2. touch /mnt/file1; fsync /mnt/file1
3. mkdir /mnt/dir2; set dir2 encrypted
4. touch /mnt/file2; fsync /mnt/file2
...
Although, newly created dir and file are not related, due to
commit bbf156f7afa7 ("f2fs: fix lost xattrs of directories"), we will
trigger checkpoint whenever fsync() comes after a new encrypted dir
created.
In order to avoid such performance regression issue, let's record an
entry including directory's ino in global cache whenever we update
directory's xattr data, and then triggerring checkpoint() only if
xattr metadata of target file's parent was updated.
This patch updates to cover below no encryption case as well:
1) parent is checkpointed
2) set_xattr(dir) w/ new xnid
3) create(file)
4) fsync(file)
Fixes: bbf156f7afa7 ("f2fs: fix lost xattrs of directories") Reported-by: wangzijie <wangzijie1@honor.com> Reported-by: Zhiguo Niu <zhiguo.niu@unisoc.com> Tested-by: Zhiguo Niu <zhiguo.niu@unisoc.com> Reported-by: Yunlei He <heyunlei@hihonor.com> Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
- writepages
- f2fs_do_write_data_page
: overwrite atomic_file's data to cow_inode
- f2fs_ioc_commit_atomic_write
In above cases racing in between atomic_write and GC, previous
data in atomic_file may be overwrited to cow_file, result in
data corruption.
This patch introduces PAGE_PRIVATE_ATOMIC_WRITE bit flag in page.private,
and use it to indicate that there is last dirty data in atomic file,
and the data should be writebacked into cow_file, if the flag is not
tagged in page, we should never write data across files.
Fixes: 3db1de0e582c ("f2fs: change the current atomic write way") Cc: Daeho Jeong <daehojeong@google.com> Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Julian Sun [Mon, 22 Jul 2024 02:39:13 +0000 (22:39 -0400)]
f2fs: fix macro definition stat_inc_cp_count
The macro stat_inc_cp_count accepts a parameter si,
but it was not used, rather the variable sbi was directly used,
which may be a local variable inside a function that calls the macros.
Signed-off-by: Julian Sun <sunjunchao2870@gmail.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The macro on_f2fs_build_free_nids accepts a parameter nmi,
but it was not used, rather the variable nm_i was directly used,
which may be a local variable inside a function that calls the macros.
Signed-off-by: Julian Sun <sunjunchao2870@gmail.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Currently, we are using a mix of traditional UFS and zone UFS to support
some functionalities that cannot be achieved on zone UFS alone. However,
there are some issues with this approach. There exists a significant
performance difference between traditional UFS and zone UFS. Under normal
usage, we prioritize writes to zone UFS. However, in critical conditions
(such as when the entire UFS is almost full), we cannot determine whether
data will be written to traditional UFS or zone UFS. This can lead to
significant performance fluctuations, which is not conducive to
development and testing. To address this, we have added an option
zlu_io_enable under sys with the following three modes:
1) zlu_io_enable == 0:Normal mode, prioritize writing to zone UFS;
2) zlu_io_enable == 1:Zone UFS only mode, only allow writing to zone UFS;
3) zlu_io_enable == 2:Traditional UFS priority mode, prioritize writing to
traditional UFS.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com> Signed-off-by: Wu Bo <bo.wu@vivo.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs: fix several potential integer overflows in file offsets
When dealing with large extents and calculating file offsets by
summing up according extent offsets and lengths of unsigned int type,
one may encounter possible integer overflow if the values are
big enough.
Prevent this from happening by expanding one of the addends to
(pgoff_t) type.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: d323d005ac4a ("f2fs: support file defragment") Cc: stable@vger.kernel.org Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs: prevent possible int overflow in dir_block_index()
The result of multiplication between values derived from functions
dir_buckets() and bucket_blocks() *could* technically reach
2^30 * 2^2 = 2^32.
While unlikely to happen, it is prudent to ensure that it will not
lead to integer overflow. Thus, use mul_u32_u32() as it's more
appropriate to mitigate the issue.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Linus Torvalds [Mon, 5 Aug 2024 16:23:00 +0000 (09:23 -0700)]
Merge tag 'slab-fixes-for-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
"Since v6.8 we've had a subtle breakage in SLUB with KFENCE enabled,
that can cause a crash. It hasn't been found earlier due to quite
specific conditions necessary (OOM during kmem_cache_alloc_bulk())"
* tag 'slab-fixes-for-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm, slub: do not call do_slab_free for kfence object
Tetsuo Handa [Sun, 4 Aug 2024 09:48:10 +0000 (18:48 +0900)]
profiling: remove profile=sleep support
The kernel sleep profile is no longer working due to a recursive locking
bug introduced by commit 42a20f86dc19 ("sched: Add wrapper for get_wchan()
to keep task blocked")
Booting with the 'profile=sleep' kernel command line option added or
executing
# echo -n sleep > /sys/kernel/profiling
after boot causes the system to lock up.
Lockdep reports
kthreadd/3 is trying to acquire lock: ffff93ac82e08d58 (&p->pi_lock){....}-{2:2}, at: get_wchan+0x32/0x70
but task is already holding lock: ffff93ac82e08d58 (&p->pi_lock){....}-{2:2}, at: try_to_wake_up+0x53/0x370
However, since nobody noticed this regression for more than two years,
let's remove 'profile=sleep' support based on the assumption that nobody
needs this functionality.
Linus Torvalds [Sun, 4 Aug 2024 15:57:08 +0000 (08:57 -0700)]
Merge tag 'x86-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- Prevent a deadlock on cpu_hotplug_lock in the aperf/mperf driver.
A recent change in the ACPI code which consolidated code pathes moved
the invocation of init_freq_invariance_cppc() to be moved to a CPU
hotplug handler. The first invocation on AMD CPUs ends up enabling a
static branch which dead locks because the static branch enable tries
to acquire cpu_hotplug_lock but that lock is already held write by
the hotplug machinery.
Use static_branch_enable_cpuslocked() instead and take the hotplug
lock read for the Intel code path which is invoked from the
architecture code outside of the CPU hotplug operations.
- Fix the number of reserved bits in the sev_config structure bit field
so that the bitfield does not exceed 64 bit.
- Add missing Zen5 model numbers
- Fix the alignment assumptions of pti_clone_pgtable() and
clone_entry_text() on 32-bit:
The code assumes PMD aligned code sections, but on 32-bit the kernel
entry text is not PMD aligned. So depending on the code size and
location, which is configuration and compiler dependent, entry text
can cross a PMD boundary. As the start is not PMD aligned adding PMD
size to the start address is larger than the end address which
results in partially mapped entry code for user space. That causes
endless recursion on the first entry from userspace (usually #PF).
Cure this by aligning the start address in the addition so it ends up
at the next PMD start address.
clone_entry_text() enforces PMD mapping, but on 32-bit the tail might
eventually be PTE mapped, which causes a map fail because the PMD for
the tail is not a large page mapping. Use PTI_LEVEL_KERNEL_IMAGE for
the clone() invocation which resolves to PTE on 32-bit and PMD on
64-bit.
- Zero the 8-byte case for get_user() on range check failure on 32-bit
The recend consolidation of the 8-byte get_user() case broke the
zeroing in the failure case again. Establish it by clearing ECX
before the range check and not afterwards as that obvioulsy can't be
reached when the range check fails
* tag 'x86-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/uaccess: Zero the 8-byte get_range case on failure on 32-bit
x86/mm: Fix pti_clone_entry_text() for i386
x86/mm: Fix pti_clone_pgtable() alignment assumption
x86/setup: Parse the builtin command line before merging
x86/CPU/AMD: Add models 0x60-0x6f to the Zen5 range
x86/sev: Fix __reserved field in sev_config
x86/aperfmperf: Fix deadlock on cpu_hotplug_lock
Linus Torvalds [Sun, 4 Aug 2024 15:50:16 +0000 (08:50 -0700)]
Merge tag 'timers-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Two fixes for the timer/clocksource code:
- The recent fix to make the take over of the broadcast timer more
reliable retrieves a per CPU pointer in preemptible context.
This went unnoticed in testing as some compilers hoist the access
into the non-preemotible section where the pointer is actually
used, but obviously compilers can rightfully invoke it where the
code put it.
Move it into the non-preemptible section right to the actual usage
side to cure it.
- The clocksource watchdog is supposed to emit a warning when the
retry count is greater than one and the number of retries reaches
the limit.
The condition is backwards and warns always when the count is
greater than one. Fixup the condition to prevent spamming dmesg"
* tag 'timers-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Fix brown-bag boolean thinko in cs_watchdog_read()
tick/broadcast: Move per CPU pointer access into the atomic section
Linus Torvalds [Sun, 4 Aug 2024 15:46:14 +0000 (08:46 -0700)]
Merge tag 'sched-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
- When stime is larger than rtime due to accounting imprecision, then
utime = rtime - stime becomes negative. As this is unsigned math, the
result becomes a huge positive number.
Cure it by resetting stime to rtime in that case, so utime becomes 0.
- Restore consistent state when sched_cpu_deactivate() fails.
When offlining a CPU fails in sched_cpu_deactivate() after the SMT
present counter has been decremented, then the function aborts but
fails to increment the SMT present counter and leaves it imbalanced.
Consecutive operations cause it to underflow. Add the missing fixup
for the error path.
For SMT accounting the runqueue needs to marked online again in the
error exit path to restore consistent state.
* tag 'sched-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Fix unbalance set_rq_online/offline() in sched_cpu_deactivate()
sched/core: Introduce sched_set_rq_on/offline() helper
sched/smt: Fix unbalance sched_smt_present dec/inc
sched/smt: Introduce sched_smt_present_inc/dec() helper
sched/cputime: Fix mul_u64_u64_div_u64() precision for cputime
Linus Torvalds [Sun, 4 Aug 2024 15:42:18 +0000 (08:42 -0700)]
Merge tag 'perf-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fixes from Thomas Gleixner:
- Move the smp_processor_id() invocation back into the non-preemtible
region, so that the result is valid to use
- Add the missing package C2 residency counters for Sierra Forest CPUs
to make the newly added support actually useful
* tag 'perf-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix smp_processor_id()-in-preemptible warnings
perf/x86/intel/cstate: Add pkg C2 residency counter for Sierra Forest
Linus Torvalds [Sun, 4 Aug 2024 15:36:57 +0000 (08:36 -0700)]
Merge tag 'irq-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A couple of fixes for interrupt chip drivers:
- Make sure to skip the clear register space in the MBIGEN driver
when calculating the node register index. Otherwise the clear
register is clobbered and the wrong node registers are accessed.
- Fix a signed/unsigned confusion in the loongarch CPU driver which
converts an error code to a huge "valid" interrupt number.
- Convert the mesion GPIO interrupt controller lock to a raw spinlock
so it works on RT.
- Add a missing static to a internal function in the pic32 EVIC
driver"
* tag 'irq-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mbigen: Fix mbigen node address layout
irqchip/meson-gpio: Convert meson_gpio_irq_controller::lock to 'raw_spinlock_t'
irqchip/irq-pic32-evic: Add missing 'static' to internal function
irqchip/loongarch-cpu: Fix return value of lpic_gsi_to_irq()
Linus Torvalds [Sun, 4 Aug 2024 15:32:31 +0000 (08:32 -0700)]
Merge tag 'locking-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Two fixes for locking and jump labels:
- Ensure that the atomic_cmpxchg() conditions are correct and
evaluating to true on any non-zero value except 1. The missing
check of the return value leads to inconsisted state of the jump
label counter.
- Add a missing type conversion in the paravirt spinlock code which
makes loongson build again"
* tag 'locking-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
jump_label: Fix the fix, brown paper bags galore
locking/pvqspinlock: Correct the type of "old" variable in pv_kick_node()
arm: dts: arm: versatile-ab: Fix duplicate clock node name
Commit 04f08ef291d4 ("arm/arm64: dts: arm: Use generic clock and
regulator nodenames") renamed nodes and created 2 "clock-24000000" nodes
(at different paths).
The kernel can't handle these duplicate names even though they are at
different paths. Fix this by renaming one of the nodes to "clock-pclk".
This name is aligned with other Arm boards (those didn't have a known
frequency to use in the node name).
Linus Torvalds [Sun, 4 Aug 2024 15:18:40 +0000 (08:18 -0700)]
Merge tag '6.11-rc1-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- two reparse point fixes
- minor cleanup
- additional trace point (to help debug a recent problem)
* tag '6.11-rc1-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal version number
smb: client: fix FSCTL_GET_REPARSE_POINT against NetApp
smb3: add dynamic tracepoints for shutdown ioctl
cifs: Remove cifs_aio_ctx
smb: client: handle lack of FSCTL_GET_REPARSE_POINT support
Linus Torvalds [Sun, 4 Aug 2024 15:12:33 +0000 (08:12 -0700)]
Merge tag 'media/v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- two Kconfig fixes
- one fix for the UVC driver addressing probing time detection of a UVC
custom controls
- one fix related to PDF generation
* tag 'media/v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: v4l: Fix missing tabular column hint for Y14P format
media: intel/ipu6: select AUXILIARY_BUS in Kconfig
media: ipu-bridge: fix ipu6 Kconfig dependencies
media: uvcvideo: Fix custom control mapping probing
Linus Torvalds [Sat, 3 Aug 2024 22:12:56 +0000 (15:12 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"One core change that reverts the double message print patch in sd.c
(it was causing regressions on embedded systems).
The rest are driver fixes in ufs, mpt3sas and mpi3mr"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: exynos: Don't resume FMP when crypto support is disabled
scsi: mpt3sas: Avoid IOMMU page faults on REPORT ZONES
scsi: mpi3mr: Avoid IOMMU page faults on REPORT ZONES
scsi: ufs: core: Do not set link to OFF state while waking up from hibernation
scsi: Revert "scsi: sd: Do not repeat the starting disk message"
scsi: ufs: core: Fix deadlock during RTC update
scsi: ufs: core: Bypass quick recovery if force reset is needed
scsi: ufs: core: Check LSDBS cap when !mcq
Linus Torvalds [Sat, 3 Aug 2024 16:09:25 +0000 (09:09 -0700)]
Merge tag 'xfs-6.11-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Chandan Babu:
- Fix memory leak when corruption is detected during scrubbing parent
pointers
- Allow SECURE namespace xattrs to use reserved block pool to in order
to prevent ENOSPC
- Save stack space by passing tracepoint's char array to file_path()
instead of another stack variable
- Remove unused parameter in macro XFS_DQUOT_LOGRES
- Replace comma with semicolon in a couple of places
* tag 'xfs-6.11-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: convert comma to semicolon
xfs: convert comma to semicolon
xfs: remove unused parameter in macro XFS_DQUOT_LOGRES
xfs: fix file_path handling in tracepoints
xfs: allow SECURE namespace xattrs to use reserved block pool
xfs: fix a memory leak
Linus Torvalds [Sat, 3 Aug 2024 16:03:21 +0000 (09:03 -0700)]
Merge tag 'parisc-for-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- fix unaligned memory accesses when calling BPF functions
- adjust memory size constants to fix possible DMA corruptions
* tag 'parisc-for-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: fix a possible DMA corruption
parisc: fix unaligned accesses in BPF
Linus Torvalds [Sat, 3 Aug 2024 01:12:06 +0000 (18:12 -0700)]
runtime constants: deal with old decrepit linkers
The runtime constants linker script depended on documented linker
behavior [1]:
"If an output section’s name is the same as the input section’s name
and is representable as a C identifier, then the linker will
automatically PROVIDE two symbols: __start_SECNAME and __stop_SECNAME,
where SECNAME is the name of the section. These indicate the start
address and end address of the output section respectively"
to just automatically define the symbol names for the bounds of the
runtime constant arrays.
It turns out that this isn't actually something we can rely on, with old
linkers not generating these automatic symbols. It looks to have been
introduced in binutils-2.29 back in 2017, and we still support building
with versions all the way back to binutils-2.25 (from 2015).
And yes, Oleg actually seems to be using such ancient versions of
binutils.
So instead of depending on the implicit symbols from "section names
match and are representable C identifiers", just do this all manually.
It's not like it causes us any extra pain, we already have to do that
for all the other sections that we use that often have special
characters in them.
Linus Torvalds [Fri, 2 Aug 2024 21:18:31 +0000 (14:18 -0700)]
Merge tag 'io_uring-6.11-20240802' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"Two minor tweaks for the NAPI handling, both from Olivier:
- Kill two unused list definitions
- Ensure that multishot NAPI doesn't age away"
* tag 'io_uring-6.11-20240802' of git://git.kernel.dk/linux:
io_uring: remove unused local list heads in NAPI functions
io_uring: keep multishot request NAPI timeout current
Linus Torvalds [Fri, 2 Aug 2024 21:10:11 +0000 (14:10 -0700)]
Merge tag 'thermal-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix a few issues related to the MSI IRQs management in the
int340x thermal driver, fix a thermal core issue that may lead to
missing trip point crossing events and update the thermal core
documentation.
Specifics:
- Fix MSI error path cleanup in int340x, allow it to work with a
subset of thermal MSI IRQs if some of them are not working and make
it free all MSI IRQs on module exit (Srinivas Pandruvada)
- Fix a thermal core issue that may lead to missing trip point
crossing events in some cases when thermal_zone_set_trips() is used
and update the thermal core documentation (Rafael Wysocki)"
* tag 'thermal-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Update thermal zone registration documentation
thermal: trip: Avoid skipping trips in thermal_zone_set_trips()
thermal: intel: int340x: Free MSI IRQ vectors on module exit
thermal: intel: int340x: Allow limited thermal MSI support
thermal: intel: int340x: Fix kernel warning during MSI cleanup
Linus Torvalds [Fri, 2 Aug 2024 17:33:06 +0000 (10:33 -0700)]
Merge tag 'ceph-for-6.11-rc2' of https://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"A fix for a potential hang in the MDS when cap revocation races with
the client releasing the caps in question, marked for stable"
* tag 'ceph-for-6.11-rc2' of https://github.com/ceph/ceph-client:
ceph: force sending a cap update msg back to MDS for revoke op
Linus Torvalds [Fri, 2 Aug 2024 17:17:49 +0000 (10:17 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"The bulk of the changes here is a largish change to guest_memfd,
delaying the clearing and encryption of guest-private pages until they
are actually added to guest page tables. This started as "let's make
it impossible to misuse the API" for SEV-SNP; but then it ballooned a
bit.
The new logic is generally simpler and more ready for hugepage support
in guest_memfd.
Summary:
- fix latent bug in how usage of large pages is determined for
confidential VMs
- fix "underline too short" in docs
- eliminate log spam from limited APIC timer periods
- disallow pre-faulting of memory before SEV-SNP VMs are initialized
- delay clearing and encrypting private memory until it is added to
guest page tables
- this change also enables another small cleanup: the checks in
SNP_LAUNCH_UPDATE that limit it to non-populated, private pages can
now be moved in the common kvm_gmem_populate() function
- fix compilation error that the RISC-V merge introduced in selftests"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: fix determination of max NPT mapping level for private pages
KVM: riscv: selftests: Fix compile error
KVM: guest_memfd: abstract how prepared folios are recorded
KVM: guest_memfd: let kvm_gmem_populate() operate only on private gfns
KVM: extend kvm_range_has_memory_attributes() to check subset of attributes
KVM: cleanup and add shortcuts to kvm_range_has_memory_attributes()
KVM: guest_memfd: move check for already-populated page to common code
KVM: remove kvm_arch_gmem_prepare_needed()
KVM: guest_memfd: make kvm_gmem_prepare_folio() operate on a single struct kvm
KVM: guest_memfd: delay kvm_gmem_prepare_folio() until the memory is passed to the guest
KVM: guest_memfd: return locked folio from __kvm_gmem_get_pfn
KVM: rename CONFIG_HAVE_KVM_GMEM_* to CONFIG_HAVE_KVM_ARCH_GMEM_*
KVM: guest_memfd: do not go through struct page
KVM: guest_memfd: delay folio_mark_uptodate() until after successful preparation
KVM: guest_memfd: return folio from __kvm_gmem_get_pfn()
KVM: x86: disallow pre-fault for SNP VMs before initialization
KVM: Documentation: Fix title underline too short warning
KVM: x86: Eliminate log spam from limited APIC timer periods
Paolo Bonzini [Fri, 2 Aug 2024 16:31:48 +0000 (12:31 -0400)]
Merge branch 'kvm-fixes' into HEAD
* fix latent bug in how usage of large pages is determined for
confidential VMs
* fix "underline too short" in docs
* eliminate log spam from limited APIC timer periods
* disallow pre-faulting of memory before SEV-SNP VMs are initialized
* delay clearing and encrypting private memory until it is added to
guest page tables
* this change also enables another small cleanup: the checks in
SNP_LAUNCH_UPDATE that limit it to non-populated, private pages
can now be moved in the common kvm_gmem_populate() function
Linus Torvalds [Fri, 2 Aug 2024 16:33:35 +0000 (09:33 -0700)]
Merge tag 'riscv-for-linus-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to avoid dropping some of the internal pseudo-extensions, which
breaks *envcfg dependency parsing
- The kernel entry address is now aligned in purgatory, which avoids a
misaligned load that can lead to crash on systems that don't support
misaligned accesses early in boot
- The FW_SFENCE_VMA_RECEIVED perf event was duplicated in a handful of
perf JSON configurations, one of them been updated to
FW_SFENCE_VMA_ASID_SENT
- The starfive cache driver is now restricted to 64-bit systems, as it
isn't 32-bit clean
- A fix for to avoid aliasing legacy-mode perf counters with software
perf counters
- VM_FAULT_SIGSEGV is now handled in the page fault code
- A fix for stalls during CPU hotplug due to IPIs being disabled
- A fix for memblock bounds checking. This manifests as a crash on
systems with discontinuous memory maps that have regions that don't
fit in the linear map
* tag 'riscv-for-linus-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix linear mapping checks for non-contiguous memory regions
RISC-V: Enable the IPI before workqueue_online_cpu()
riscv/mm: Add handling for VM_FAULT_SIGSEGV in mm_fault_error()
perf: riscv: Fix selecting counters in legacy mode
cache: StarFive: Require a 64-bit system
perf arch events: Fix duplicate RISC-V SBI firmware event name
riscv/purgatory: align riscv_kernel_entry
riscv: cpufeature: Do not drop Linux-internal extensions
Paul E. McKenney [Fri, 2 Aug 2024 15:46:15 +0000 (08:46 -0700)]
clocksource: Fix brown-bag boolean thinko in cs_watchdog_read()
The current "nretries > 1 || nretries >= max_retries" check in
cs_watchdog_read() will always evaluate to true, and thus pr_warn(), if
nretries is greater than 1. The intent is instead to never warn on the
first try, but otherwise warn if the successful retry was the last retry.
Therefore, change that "||" to "&&".
Fixes: db3a34e17433 ("clocksource: Retry clock read if long delays detected") Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20240802154618.4149953-2-paulmck@kernel.org
Linus Torvalds [Fri, 2 Aug 2024 16:14:48 +0000 (09:14 -0700)]
Merge tag 'asm-generic-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"These are three important bug fixes for the cross-architecture tree,
fixing a regression with the new syscall.tbl file, the inconsistent
numbering for the new uretprobe syscall and a bug with iowrite64be on
alpha"
* tag 'asm-generic-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
syscalls: fix syscall macros for newfstat/newfstatat
uretprobe: change syscall number, again
alpha: fix ioread64be()/iowrite64be() helpers
Linus Torvalds [Fri, 2 Aug 2024 16:04:57 +0000 (09:04 -0700)]
Merge tag 'sound-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A small collection of fixes:
- Revert of FireWire changes that caused a long-time regression
- Another long-time regression fix for AMD HDMI
- MIDI2 UMP fixes
- HD-audio Conexant codec fixes and a quirk"
* tag 'sound-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: Conditionally use snooping for AMD HDMI
ALSA: usb-audio: Correct surround channels in UAC1 channel map
ALSA: seq: ump: Explicitly reset RPN with Null RPN
ALSA: seq: ump: Transmit RPN/NRPN message at each MSB/LSB data reception
ALSA: seq: ump: Use the common RPN/bank conversion context
ALSA: ump: Explicitly reset RPN with Null RPN
ALSA: ump: Transmit RPN/NRPN message at each MSB/LSB data reception
Revert "ALSA: firewire-lib: operate for period elapse event in process context"
Revert "ALSA: firewire-lib: obsolete workqueue for period update"
ALSA: hda/realtek: Add quirk for Acer Aspire E5-574G
ALSA: seq: ump: Optimize conversions from SysEx to UMP
ALSA: hda/conexant: Mute speakers at suspend / shutdown
ALSA: hda/generic: Add a helper to mute speakers at suspend/shutdown
ALSA: hda: conexant: Fix headset auto detect fail in the polling mode
Linus Torvalds [Fri, 2 Aug 2024 15:59:09 +0000 (08:59 -0700)]
Merge tag 'drm-fixes-2024-08-02' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Regular weekly fixes. This is a bit larger than usual but doesn't seem
too crazy.
Most of it is vmwgfx changes that fix a bunch of issues with wayland
userspaces with dma-buf/external buffers and modesetting fixes.
Otherwise it's kinda spread out, v3d fixes some new ioctls, nouveau
has regression revert and fixes, amdgpu, i915 and ast have some small
fixes, and some core fixes spread about.
client:
- fix error code
atomic:
- allow damage clips with async flips
- allow explicit sync with async flips
kselftests:
- fix dmabuf-heaps test
panic:
- fix schedule_work in panic paths
panel:
- fix OrangePi Neo orientation
gpuvm:
- fix missing dependency
amdgpu:
- SMU 14.x update
- Fix contiguous VRAM handling for IB parsing
- GFX 12 fix
- Regression fix for old APUs
i915:
- Static analysis fix for int overflow
- Fix for HDCP2_STREAM_STATUS macro and removal of PWR_CLK_STATE for gen12
nouveau:
- revert busy wait change that caused a resume regression
- fix buffer placement fault on dynamic pm s/r
- fix refcount underflow
ast:
- fix black screen on resume
- wake during connector status detect
v3d:
- fix issues with perf/timestamp ioctls
vmwgfx:
- fix deadlock in dma-buf fence polling
- fix screen surface refcounting
- fix dumb buffer handling
- fix support for external buffers
- fix overlay with screen targets
- trigger modeset on screen moves"
* tag 'drm-fixes-2024-08-02' of https://gitlab.freedesktop.org/drm/kernel: (31 commits)
Revert "nouveau: rip out busy fence waits"
nouveau: set placement to original placement on uvmm validate.
drm/atomic: Allow userspace to use damage clips with async flips
drm/atomic: Allow userspace to use explicit sync with atomic async flips
drm/i915: Fix possible int overflow in skl_ddi_calculate_wrpll()
drm/i915/hdcp: Fix HDCP2_STREAM_STATUS macro
drm/ast: astdp: Wake up during connector status detection
i915/perf: Remove code to update PWR_CLK_STATE for gen12
kselftests: dmabuf-heaps: Ensure the driver name is null-terminated
drm/client: Fix error code in drm_client_buffer_vmap_local()
drm/amdgpu: Fix APU handling in amdgpu_pm_load_smu_firmware()
drm/amdgpu: increase mes log buffer size for gfx12
drm/amdgpu: fix contiguous handling for IB parsing v2
drm/amdgpu/pm: support gpu_metrics sysfs interface for smu v14.0.2/3
drm/vmwgfx: Trigger a modeset when the screen moves
drm/vmwgfx: Fix overlay when using Screen Targets
drm/vmwgfx: Add basic support for external buffers
drm/vmwgfx: Fix handling of dumb buffers
drm/vmwgfx: Make sure the screen surface is ref counted
drm/vmwgfx: Fix a deadlock in dma buf fence polling
...
Paulo Alcantara [Thu, 1 Aug 2024 21:12:39 +0000 (18:12 -0300)]
smb: client: fix FSCTL_GET_REPARSE_POINT against NetApp
NetApp server requires the file to be open with FILE_READ_EA access in
order to support FSCTL_GET_REPARSE_POINT, otherwise it will return
STATUS_INVALID_DEVICE_REQUEST. It doesn't make any sense because
there's no requirement for FILE_READ_EA bit to be set nor
STATUS_INVALID_DEVICE_REQUEST being used for something other than
"unsupported reparse points" in MS-FSA.
To fix it and improve compatibility, set FILE_READ_EA & SYNCHRONIZE
bits to match what Windows client currently does.
Tested-by: Sebastian Steinbeisser <Sebastian.Steinbeisser@lrz.de> Acked-by: Tom Talpey <tom@talpey.com> Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Steve French [Tue, 30 Jul 2024 05:26:21 +0000 (00:26 -0500)]
smb3: add dynamic tracepoints for shutdown ioctl
For debugging an umount failure in xfstests generic/043 generic/044 in some
configurations, we needed more information on the shutdown ioctl which
was suspected of being related to the cause, so tracepoints are added
in this patch e.g.
"trace-cmd record -e smb3_shutdown_enter -e smb3_shutdown_done -e smb3_shutdown_err"
David Howells [Wed, 31 Jul 2024 10:30:00 +0000 (11:30 +0100)]
cifs: Remove cifs_aio_ctx
Remove struct cifs_aio_ctx and its associated alloc/release functions as it
is no longer used, the functions being taken over by netfslib.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: linux-cifs@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
Paulo Alcantara [Wed, 31 Jul 2024 13:23:39 +0000 (10:23 -0300)]
smb: client: handle lack of FSCTL_GET_REPARSE_POINT support
As per MS-FSA 2.1.5.10.14, support for FSCTL_GET_REPARSE_POINT is
optional and if the server doesn't support it,
STATUS_INVALID_DEVICE_REQUEST must be returned for the operation.
If we find files with reparse points and we can't read them due to
lack of client or server support, just ignore it and then treat them
as regular files or junctions.
Fixes: 5f71ebc41294 ("smb: client: parse reparse point flag in create response") Reported-by: Sebastian Steinbeisser <Sebastian.Steinbeisser@lrz.de> Tested-by: Sebastian Steinbeisser <Sebastian.Steinbeisser@lrz.de> Acked-by: Tom Talpey <tom@talpey.com> Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Will Deacon [Wed, 31 Jul 2024 13:36:01 +0000 (14:36 +0100)]
arm64: jump_label: Ensure patched jump_labels are visible to all CPUs
Although the Arm architecture permits concurrent modification and
execution of NOP and branch instructions, it still requires some
synchronisation to ensure that other CPUs consistently execute the newly
written instruction:
> When the modified instructions are observable, each PE that is
> executing the modified instructions must execute an ISB or perform a
> context synchronizing event to ensure execution of the modified
> instructions
Prior to commit f6cc0c501649 ("arm64: Avoid calling stop_machine() when
patching jump labels"), the arm64 jump_label patching machinery
performed synchronisation using stop_machine() after each modification,
however this was problematic when flipping static keys from atomic
contexts (namely, the arm_arch_timer CPU hotplug startup notifier) and
so we switched to the _nosync() patching routines to avoid "scheduling
while atomic" BUG()s during boot.
In hindsight, the analysis of the issue in f6cc0c501649 isn't quite
right: it cites the use of IPIs in the default patching routines as the
cause of the lockup, whereas stop_machine() does not rely on IPIs and
the I-cache invalidation is performed using __flush_icache_range(),
which elides the call to kick_all_cpus_sync(). In fact, the blocking
wait for other CPUs is what triggers the BUG() and the problem remains
even after f6cc0c501649, for example because we could block on the
jump_label_mutex. Eventually, the arm_arch_timer driver was fixed to
avoid the static key entirely in commit a862fc2254bd
("clocksource/arm_arch_timer: Remove use of workaround static key").
This all leaves the jump_label patching code in a funny situation on
arm64 as we do not synchronise with other CPUs to reduce the likelihood
of a bug which no longer exists. Consequently, toggling a static key on
one CPU cannot be assumed to take effect on other CPUs, leading to
potential issues, for example with missing preempt notifiers.
Rather than revert f6cc0c501649 and go back to stop_machine() for each
patch site, implement arch_jump_label_transform_apply() and kick all
the other CPUs with an IPI at the end of patching.
Cc: Alexander Potapenko <glider@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <maz@kernel.org> Fixes: f6cc0c501649 ("arm64: Avoid calling stop_machine() when patching jump labels") Signed-off-by: Will Deacon <will@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20240731133601.3073-1-will@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Arnd Bergmann [Thu, 1 Aug 2024 12:27:23 +0000 (14:27 +0200)]
syscalls: fix syscall macros for newfstat/newfstatat
The __NR_newfstat and __NR_newfstatat macros accidentally got renamed
in the conversion to the syscall.tbl format, dropping the 'new' portion
of the name.
In an unrelated change, the two syscalls are no longer architecture
specific but are once more defined on all 64-bit architectures, so the
'newstat' ABI keyword can be dropped from the table as a simplification.
Despite multiple attempts to get the syscall number assignment right
for the newly added uretprobe syscall, we ended up with a bit of a mess:
- The number is defined as 467 based on the assumption that the
xattrat family of syscalls would use 463 through 466, but those
did not make it into 6.11.
- The include/uapi/asm-generic/unistd.h file still lists the number
463, but the new scripts/syscall.tbl that was supposed to have the
same data lists 467 instead as the number for arc, arm64, csky,
hexagon, loongarch, nios2, openrisc and riscv. None of these
architectures actually provide a uretprobe syscall.
- All the other architectures (powerpc, arm, mips, ...) don't list
this syscall at all.
There are two ways to make it consistent again: either list it with
the same syscall number on all architectures, or only list it on x86
but not in scripts/syscall.tbl and asm-generic/unistd.h.
Based on the most recent discussion, it seems like we won't need it
anywhere else, so just remove the inconsistent assignment and instead
move the x86 number to the next available one in the architecture
specific range, which is 335.
Fixes: 5c28424e9a34 ("syscalls: Fix to add sys_uretprobe to syscall.tbl") Fixes: 190fec72df4a ("uprobe: Wire up uretprobe system call") Fixes: 63ded110979b ("uprobe: Change uretprobe syscall scope and number") Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rafael J. Wysocki [Thu, 1 Aug 2024 16:39:28 +0000 (18:39 +0200)]
thermal: core: Update thermal zone registration documentation
The thermal sysfs API document is outdated. One of the problems with
it is that is still documents thermal_zone_device_register() which
does not exit any more and it does not reflect the current thermal
zone operations definition.
Replace the thermal_zone_device_register() description in it with
a thermal_zone_device_register_with_trips() description, including
an update of the thermal zone operations list.
projects / users / jedix / linux-maple.git / log