]> www.infradead.org Git - users/jedix/linux-maple.git/log
users/jedix/linux-maple.git
12 months agoaccel/habanalabs: print timestamp of last PQ heartbeat on EQ heartbeat failure
Tomer Tayar [Wed, 1 May 2024 12:10:59 +0000 (15:10 +0300)]
accel/habanalabs: print timestamp of last PQ heartbeat on EQ heartbeat failure

The test packet which is sent to FW for the PQ heartbeat is used also as
the trigger in FW to send the EQ heartbeat event.
Add the time of the last sent packet to the debug info which is printed
upon a EQ heartbeat failure.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs: dump the EQ entries headers on EQ heartbeat failure
Tomer Tayar [Tue, 16 Apr 2024 16:01:42 +0000 (19:01 +0300)]
accel/habanalabs: dump the EQ entries headers on EQ heartbeat failure

Add a dump of the EQ entries headers upon a EQ heartbeat failure.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs: revise print on EQ heartbeat failure
Tomer Tayar [Tue, 16 Apr 2024 14:01:12 +0000 (17:01 +0300)]
accel/habanalabs: revise print on EQ heartbeat failure

Don't print the "previous EQ index" value in case of a EQ heartbeat
failure, because it is incremented along with the EQ CI and therefore
redundant.

In addition, as the CPU-CP PI is zeroed when it reaches a value that is
twice the queue size, add a value of the CI with a similar wrap around,
to make it easier to compare the values.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs: add more info upon cpu pkt timeout
Farah Kassabri [Tue, 9 Apr 2024 11:46:19 +0000 (14:46 +0300)]
accel/habanalabs: add more info upon cpu pkt timeout

In order to have better debuggability upon encountering FW issues,
We are adding additional info once CPU packet timeout expires.

Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs: additional print in device-in-use info
Ilia Levi [Thu, 4 Apr 2024 10:50:47 +0000 (13:50 +0300)]
accel/habanalabs: additional print in device-in-use info

When device release triggers a hard reset, there is a printout of
the cause. Currently listed causes (that increment context refcount)
are active command submissions and exported DMA buffer objects. In
any other case, the printout emits "unknown reason". We identify and
print another reason - allocated command buffers.

Signed-off-by: Ilia Levi <illevi@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoMAINTAINERS: Change habanalabs maintainer and git repo path
Oded Gabbay [Wed, 15 May 2024 16:22:21 +0000 (19:22 +0300)]
MAINTAINERS: Change habanalabs maintainer and git repo path

Because I left habana, Ofir Bitton is now the habanalabs driver
maintainer.

The git repo also changed location to the Habana GitHub website.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalbs/gaudi2: reduce interrupt count to 128
Ofir Bitton [Sun, 31 Mar 2024 12:37:32 +0000 (15:37 +0300)]
accel/habanalbs/gaudi2: reduce interrupt count to 128

Some systems allow a maximum number of 128 MSI-X interrupts.
Hence we reduce the interrupt count to 128 instead of 512.

Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs: disable EQ interrupt after disabling pci
Tal Cohen [Wed, 3 Apr 2024 10:09:42 +0000 (13:09 +0300)]
accel/habanalabs: disable EQ interrupt after disabling pci

When sending disable pci msg towards firmware, there is a
possibility that an EQ packet is already pending,
disabling EQ interrupt will prevent this from happening.
The interrupt will be re-enabled after reset.

Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs: change the heartbeat scheduling point
Farah Kassabri [Thu, 4 Apr 2024 08:06:03 +0000 (11:06 +0300)]
accel/habanalabs: change the heartbeat scheduling point

Currently we schedule the heartbeat thread at late init, only then
we set the INTS_REGISTER packet which enables events to be received
from firmware.

Init may take some time and we want to give firmware 2 full cycles of
heartbeat thread after it received INTS_REGISTER.

The patch will move the heartbeat thread scheduling to be after driver
is done with all initializations.

Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs/gaudi2: unsecure edma max outstanding register
Rakesh Ughreja [Tue, 26 Mar 2024 06:01:02 +0000 (08:01 +0200)]
accel/habanalabs/gaudi2: unsecure edma max outstanding register

Netowrk EDMAs uses more outstanding transfers so this needs to be
programmed by EDMA firmware.

Signed-off-by: Rakesh Ughreja <rughreja@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs: remove timestamp registration debug prints
Ofir Bitton [Wed, 20 Mar 2024 14:02:48 +0000 (16:02 +0200)]
accel/habanalabs: remove timestamp registration debug prints

There are several timestamp registration debug prints which
spams the kernel log whenever dyn debug is enabled.
Remove those prints.

Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs: add cpld ts cpld_timestamp cpucp
Vitaly Margolin [Mon, 27 May 2024 14:25:37 +0000 (17:25 +0300)]
accel/habanalabs: add cpld ts cpld_timestamp cpucp

Add cpld_timestamp field to cpucp_info structure and return cpld
timestamp as part of cpld version

Signed-off-by: Vitaly Margolin <vmargolin@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs: add a common handler for clock change events
Tomer Tayar [Tue, 12 Mar 2024 14:48:42 +0000 (16:48 +0200)]
accel/habanalabs: add a common handler for clock change events

As the new dynamic EQ includes clock change events which are common and
not ASIC-specific, add a common handler for these events.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs: use device-name directory in debugfs-driver-habanalabs
Tomer Tayar [Wed, 28 Feb 2024 18:40:00 +0000 (20:40 +0200)]
accel/habanalabs: use device-name directory in debugfs-driver-habanalabs

The device debugfs directory was modified to be named as the parent
device name.
Update the description of 'mmu' and 'mmu_error' to use the new path.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs/gaudi2: add GAUDI2D revision support
Farah Kassabri [Thu, 14 Mar 2024 10:36:04 +0000 (12:36 +0200)]
accel/habanalabs/gaudi2: add GAUDI2D revision support

Gaudi2 with PCI revision ID with the value of '4' represents Gaudi2D
device and should be detected and initialized as Gaudi2.

Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs: move hl_eq_heartbeat_event_handle() to common code
Tomer Tayar [Tue, 12 Mar 2024 14:55:08 +0000 (16:55 +0200)]
accel/habanalabs: move hl_eq_heartbeat_event_handle() to common code

hl_eq_heartbeat_event_handle() doesn't have ASIC specific code, and
therefore can be moved from Gaudi2-only code to common code, and
possibly used for other ASICs.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs: add an EQ size ASIC property
Tomer Tayar [Wed, 13 Mar 2024 09:45:45 +0000 (11:45 +0200)]
accel/habanalabs: add an EQ size ASIC property

Future supported ASICs might use the dynamic EQ mechanism with the
firmware, and in that case the EQ size won't be equal to the default
HL_EQ_SIZE_IN_BYTES value.
Add an ASIC property to enable overriding this value.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs: separate nonce from max_size in cpucp_packet struct
Dani Liberman [Mon, 11 Mar 2024 16:31:10 +0000 (18:31 +0200)]
accel/habanalabs: separate nonce from max_size in cpucp_packet struct

In struct cpucp_packet both nonce and data_max_size members are in an
union overlapping each other. This is a problem as they both are used
in attestation and info_signed packets.
The solution here is to move the nonce member to a different union under
the same structure.

Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs/gaudi2: assume hard-reset by FW upon MC SEI severe error
Tomer Tayar [Sun, 10 Mar 2024 10:18:35 +0000 (12:18 +0200)]
accel/habanalabs/gaudi2: assume hard-reset by FW upon MC SEI severe error

FW initiates a hard reset upon an MC SEI severe error.
Align the driver to expect this reset and avoid accessing the device
until the reset is done.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs/gaudi2: revise return value handling in gaudi2_hbm_sei_handle_read_err()
Tomer Tayar [Sun, 10 Mar 2024 10:03:22 +0000 (12:03 +0200)]
accel/habanalabs/gaudi2: revise return value handling in gaudi2_hbm_sei_handle_read_err()

The return value in gaudi2_hbm_sei_handle_read_err() is boolean and not
a bitmask, so there is need for "|= true".
In addition, rename the 'rc' variable, as no "return code" is returned
here but an indication if a hard reset is required.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs/gaudi2: align interrupt names to table
Ariel Suller [Wed, 6 Mar 2024 09:04:01 +0000 (11:04 +0200)]
accel/habanalabs/gaudi2: align interrupt names to table

when reporting tpc events, the dcore and tpc in dcore should
be reported and propagated, and not the generatl tpc number

Signed-off-by: Ariel Suller <asuller@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs: check for errors after preboot is ready
Farah Kassabri [Sun, 3 Mar 2024 16:06:11 +0000 (18:06 +0200)]
accel/habanalabs: check for errors after preboot is ready

Driver should check and report any fatal errors detected by preboot,
before it attempts to load the boot fit.
Some errors may cause the driver to stop the boot process and mark
the device as unusable.
This check will allow the driver to fail and print the error reported
by preboot and skip the time wasting attempt of trying to load the
boot fit, which will fail due to the error.

Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs: use msg_header instead of desc_header
Igal Zeltser [Sun, 3 Mar 2024 14:32:08 +0000 (16:32 +0200)]
accel/habanalabs: use msg_header instead of desc_header

Struct comms_desc_header is deprecated and replaced by struct
comms_msg_header. As a preparation for removing comms_desc_header
from FW, all it's usage in code is replaced by comms_msg_header.

Signed-off-by: Igal Zeltser <izeltser@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs: add heartbeat debug info
Farah Kassabri [Wed, 21 Feb 2024 09:47:12 +0000 (11:47 +0200)]
accel/habanalabs: add heartbeat debug info

It is hard to debug the reason for heartbeat check failures.
As an attempt to ease this task, this patch will provide more
information when this failure happens.
Heartbeat checks the communication with FW, so printing
the CPU queue pi/ci and the counter of how many times that event
was received would help in debugging the issue.

Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs: add device name to invalidation failure msg
Ohad Sharabi [Sun, 25 Feb 2024 09:07:58 +0000 (11:07 +0200)]
accel/habanalabs: add device name to invalidation failure msg

This addition helps log parsers better define the error without the need
to go back and search the device name on former log lines.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs: expose server type in debugfs
Tal Risin [Mon, 26 Feb 2024 09:56:35 +0000 (11:56 +0200)]
accel/habanalabs: expose server type in debugfs

Exposing server type through debugfs to enable easier access via
scripts.

Signed-off-by: Tal Risin <trisin@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs: use parent device for trace events
Tomer Tayar [Sun, 25 Feb 2024 11:54:14 +0000 (13:54 +0200)]
accel/habanalabs: use parent device for trace events

Trace events might still be recorded after the accel device is released,
while the device name is no longer available.
Modify the trace functions to use the parent device instead, which is
available at that point and still informative as the device name.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs: no CPUCP prints on heartbeat failure
Ohad Sharabi [Sun, 18 Feb 2024 09:54:29 +0000 (11:54 +0200)]
accel/habanalabs: no CPUCP prints on heartbeat failure

If we detected heartbet event while some daemon in the background send
(via driver interface) CPUCP messages the dmesg will be flooded.

Instead, a slight refactor in hl_fw_send_cpu_message() returns -EAGAIN
when CPU is disabled (i.e. heartbeat failure) and only then.

Later, all calling functions that may be invoked by user space can issue
prints only if the error code is not -EAGAIN.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs/gaudi2: align embedded specs headers
Ofir Bitton [Mon, 19 Feb 2024 11:43:55 +0000 (13:43 +0200)]
accel/habanalabs/gaudi2: align embedded specs headers

Align embedded headers to latest release.

Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs: restructure function that checks heartbeat received
Ohad Sharabi [Sun, 18 Feb 2024 07:38:23 +0000 (09:38 +0200)]
accel/habanalabs: restructure function that checks heartbeat received

The function returned an error code which isn't propagated up the stack
(nor is it printed).

The return value is only checked for =0 or !=0 which implies bool return
value.

The function signature is updated accordingly, renamed, and slightly
refactored.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs/gaudi2: update interrupts related headers
Farah Kassabri [Sun, 18 Feb 2024 11:04:31 +0000 (13:04 +0200)]
accel/habanalabs/gaudi2: update interrupts related headers

Align the interrupts related headers to latest release.

Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs: add device name to error print
Dani Liberman [Thu, 15 Feb 2024 13:04:40 +0000 (15:04 +0200)]
accel/habanalabs: add device name to error print

The extra info will help in better traceability and debug.

Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
12 months agoaccel/habanalabs/gaudi2: use single function to compare FW versions
Ohad Sharabi [Wed, 10 Jan 2024 12:27:44 +0000 (14:27 +0200)]
accel/habanalabs/gaudi2: use single function to compare FW versions

Currently, the code contains 2 types of FW version comparison functions:
- hl_is_fw_sw_ver_[below/equal_or_greater]()
- gaudi2 specific function of the type
  gaudi2_is_fw_ver_[below/above]x_y_z()

Moreover, some functions use the inner FW version which shuold be only
stage during development but not version dependencies.

Finally, some tests are done to deprecated FW version to which LKD
should hold no compatibility.

This commit aligns all APIs to a single function that just compares the
version and return an integers indicator (similar in some way to
strcmp()).

In addition, this generic function now considers also the sub-minor FW
version and also remove dead code resulting in deprecated FW versions
compatibility.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
13 months agoMerge tag 'amd-drm-next-6.11-2024-06-07' of https://gitlab.freedesktop.org/agd5f...
Dave Airlie [Tue, 11 Jun 2024 04:01:55 +0000 (14:01 +1000)]
Merge tag 'amd-drm-next-6.11-2024-06-07' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.11-2024-06-07:

amdgpu:
- DCN 4.0.x support
- DCN 3.5 updates
- GC 12.0 support
- DP MST fixes
- Cursor fixes
- MES11 updates
- MMHUB 4.1 support
- DML2 Updates
- DCN 3.1.5 fixes
- IPS fixes
- Various code cleanups
- GMC 12.0 support
- SDMA 7.0 support
- SMU 13 updates
- SR-IOV fixes
- VCN 5.x fixes
- MES12 support
- SMU 14.x updates
- Devcoredump improvements
- Fixes for HDP flush on platforms with >4k pages
- GC 9.4.3 fixes
- RAS ACA updates
- Silence UBSAN flex array warnings
- MMHUB 3.3 updates

amdkfd:
- Contiguous VRAM allocations
- GC 12.0 support
- SDMA 7.0 support
- SR-IOV fixes

radeon:
- Backlight workaround for iMac
- Silence UBSAN flex array warnings

UAPI:
- GFX12 modifier and DCC support
  Proposed Mesa changes:
  https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/29510
- KFD GFX ALU exceptions
  Proposed ROCdebugger changes:
  https://github.com/ROCm/ROCdbgapi/commit/08c760622b6601abf906f75abbc5e21d9fd425df
  https://github.com/ROCm/ROCgdb/commit/944fe1c1414a68700414e86e32273b6bfa62ba6f
- KFD Contiguous VRAM allocation flag
  Proposed ROCr/HIP changes:
  https://github.com/ROCm/ROCT-Thunk-Interface/commit/f7b4a269914a3ab4f1e2453c2879adb97b5cc9e5
  https://github.com/ROCm/ROCR-Runtime/pull/214/commits/26e8530d05a775872cb06dde6693db72be0c454a
  https://github.com/ROCm/clr/commit/1d48f2a1ab38b632919c4b7274899b3faf4279ff

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607195900.902537-1-alexander.deucher@amd.com
13 months agoMerge tag 'drm-xe-next-2024-06-06' of https://gitlab.freedesktop.org/drm/xe/kernel...
Dave Airlie [Mon, 10 Jun 2024 23:08:54 +0000 (09:08 +1000)]
Merge tag 'drm-xe-next-2024-06-06' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next

UAPI Changes:
- Expose the L3 bank mask (Francois)

Cross-subsystem Changes:
- Update Xe driver maintainers (Oded)

Display (i915):
- Add missing include to intel_vga.c (Michal Wajdeczko)

Driver Changes:
- Fix Display (xe-only) detection for ADL-N (Lucas)
- Runtime PM fixes that enabled PC-10 and D3Cold (Francois, Rodrigo)
- Fix unexpected silent drm backmerge issues (Thomas)
- More (a lot more) preparation for SR-IOV support (Michal Wajdeczko)
- Devcoredump fixes and improvements (Jose, Tejas, Matt Brost)
- Introduce device 'wedged' state (Rodrigo)
- Improve debug and info messages (Michal Wajdeczko, Rodrigo, Nirmoy)
- Adding or fixing workarounds (Tejas, Shekhar, Lucas, Bommu)
- Check result of drmm_mutex_init (Michal Wajdeczko)
- Enlarge the critical dma fence area for preempt fences (Matt Auld)
- Prevent UAF in VM's rebind work (Matt Auld)
- GuC submit related clean-ups and fixes (Matt Brost, Himal, Jonathan, Niranjana)
- Prefer local helpers to perform dma reservation locking (Himal)
- Spelling and typo fixes (Colin, Francois)
- Prep patches for 1 job per VM bind IOCTL (no uapi change yet) (Matt Brost)
- Remove uninitialized end var from xe_gt_tlb_invalidation_range (Nirmoy)
- GSC related changes targeting LNL support (Daniele)
- Fix assert in L3 bank mask generation (Francois)
- Perform dma_map when moving system buffer objects to TT (Thomas)
- Add helpers for manipulating macro arguments (Michal Wajdeczko)
- Refactor default device atomic settings (Nirmoy)
- Add debugfs node to dump mocs (Janga)
- Use ordered WQ for G2H handler (Matt Brost)
- Clean up and fixes in header includes (Michal Wajdeczko)
- Prefer flexible-array over deprecated zero-lenght ones (Lucas)
- Add Indirect Ring State support (Niranjana)
- Fix UBSAN shift-out-of-bounds failure (Shuicheng)
- HWMon fixes and additions (Karthik)
- Clean-up refactor around probe init functions (Lucas, Michal Wajdeczko)
- Fix PCODE init function (Himal)
- Only use reserved BCS instances for usm migrate exec queue (Matt Brost)
- Only zap PTEs as needed (Matt Brost)
- Per client usage info (Lucas)
- Core hotunplug improvements converting stuff towards devm (Matt Auld)
- Don't emit false error if running in execlist mode (Michal Wajdeczko)
- Remove unused struct (Dr. David)
- Support/debug for slow GuC loads (John Harrison)
- Decouple job seqno and lrc seqno (Matt Brost)
- Allow migrate vm gpu submissions from reclaim context (Thomas)
- Rename drm-client running time to run_ticks and fix a UAF (Umesh)
- Check empty pinned BO list with lock held (Nirmoy)
- Drop undesired prefix from the platform name (Michal Wajdeczko)
- Remove unwanted mutex locking on xe file close (Niranjana)
- Replace format-less snprintf() with strscpy() (Arnd)
- Other general clean-ups on registers definitions and function names (Michal Wajdeczko)
- Add kernel-doc to some xe_lrc interfaces (Niranajana)
- Use missing lock in relay_needs_worker (Nirmoy)
- Drop redundant W=1 warnings from Makefile (Jani)
- Simplify if condition in preempt fences code (Thorsten)
- Flush engine buffers before signalling user fence on all engines (Andrzej)
- Don't overmap identity VRAM mapping (Matt Brost)
- Do not dereference NULL job->fence in trace points (Matt Brost)
- Add synchronous gt reset debugfs (Jonathan)
- Xe gt_idle fixes (Riana)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZmItmuf7vq_xvRjJ@intel.com
13 months agoLinux 6.10-rc3
Linus Torvalds [Sun, 9 Jun 2024 21:19:43 +0000 (14:19 -0700)]
Linux 6.10-rc3

13 months agoMerge tag 'perf-tools-fixes-for-v6.10-2-2024-06-09' of git://git.kernel.org/pub/scm...
Linus Torvalds [Sun, 9 Jun 2024 16:04:51 +0000 (09:04 -0700)]
Merge tag 'perf-tools-fixes-for-v6.10-2-2024-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Update copies of kernel headers, which resulted in support for the
   new 'mseal' syscall, SUBVOL statx return mask bit, RISC-V and PPC
   prctls, fcntl's DUPFD_QUERY, POSTED_MSI_NOTIFICATION IRQ vector,
   'map_shadow_stack' syscall for x86-32.

 - Revert perf.data record memory allocation optimization that ended up
   causing a regression, work is being done to re-introduce it in the
   next merge window.

 - Fix handling of minimal vmlinux.h file used with BPF's CO-RE when
   interrupting the build.

* tag 'perf-tools-fixes-for-v6.10-2-2024-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  perf bpf: Fix handling of minimal vmlinux.h file when interrupting the build
  Revert "perf record: Reduce memory for recording PERF_RECORD_LOST_SAMPLES event"
  tools headers arm64: Sync arm64's cputype.h with the kernel sources
  tools headers uapi: Sync linux/stat.h with the kernel sources to pick STATX_SUBVOL
  tools headers UAPI: Update i915_drm.h with the kernel sources
  tools headers UAPI: Sync kvm headers with the kernel sources
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  tools headers: Update the syscall tables and unistd.h, mostly to support the new 'mseal' syscall
  perf trace beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources to pick POSTED_MSI_NOTIFICATION
  perf beauty: Update copy of linux/socket.h with the kernel sources
  tools headers UAPI: Sync fcntl.h with the kernel sources to pick F_DUPFD_QUERY
  tools headers UAPI: Sync linux/prctl.h with the kernel sources
  tools include UAPI: Sync linux/stat.h with the kernel sources

13 months agoMerge tag 'edac_urgent_for_v6.10_rc3' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 9 Jun 2024 15:49:13 +0000 (08:49 -0700)]
Merge tag 'edac_urgent_for_v6.10_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras

Pull EDAC fixes from Borislav Petkov:

 - Convert PCI core error codes to proper error numbers since latter get
   propagated all the way up to the module loading functions

* tag 'edac_urgent_for_v6.10_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/igen6: Convert PCIBIOS_* return codes to errnos
  EDAC/amd64: Convert PCIBIOS_* return codes to errnos

13 months agoMerge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 9 Jun 2024 02:14:02 +0000 (19:14 -0700)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk fix from Stephen Boyd:
 "One fix for the SiFive PRCI clocks so that the device boots again.

  This driver was registering clkdev lookups that were always going to
  be useless. This wasn't a problem until clkdev started returning an
  error in these cases, causing this driver to fail probe, and thus boot
  to fail because clks are essential for most drivers. The fix is
  simple, don't use clkdev because this is a DT based system where
  clkdev isn't used"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: sifive: Do not register clkdevs for PRCI clocks

13 months agoMerge tag '6.10-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Sun, 9 Jun 2024 02:07:18 +0000 (19:07 -0700)]
Merge tag '6.10-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull smb client fixes from Steve French:
 "Two small smb3 client fixes:

   - fix deadlock in umount

   - minor cleanup due to netfs change"

* tag '6.10-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Don't advance the I/O iterator before terminating subrequest
  smb: client: fix deadlock in smb2_find_smb_tcon()

13 months agoMerge tag 'for-linus-2024060801' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 8 Jun 2024 17:48:11 +0000 (10:48 -0700)]
Merge tag 'for-linus-2024060801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid

Pull HID fixes from Benjamin Tissoires:

 - fix potential read out of bounds in hid-asus (Andrew Ballance)

 - fix endian-conversion on little endian systems in intel-ish-hid (Arnd
   Bergmann)

 - A couple of new input event codes (Aseda Aboagye)

 - errors handling fixes in hid-nvidia-shield (Chen Ni), hid-nintendo
   (Christophe JAILLET), hid-logitech-dj (José Expósito)

 - current leakage fix while the device is in suspend on a i2c-hid
   laptop (Johan Hovold)

 - other assorted smaller fixes and device ID / quirk entry additions

* tag 'for-linus-2024060801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: Ignore battery for ELAN touchscreens 2F2C and 4116
  HID: i2c-hid: elan: fix reset suspend current leakage
  dt-bindings: HID: i2c-hid: elan: add 'no-reset-on-power-off' property
  dt-bindings: HID: i2c-hid: elan: add Elan eKTH5015M
  dt-bindings: HID: i2c-hid: add dedicated Ilitek ILI2901 schema
  input: Add support for "Do Not Disturb"
  input: Add event code for accessibility key
  hid: asus: asus_report_fixup: fix potential read out of bounds
  HID: logitech-hidpp: add missing MODULE_DESCRIPTION() macro
  HID: intel-ish-hid: fix endian-conversion
  HID: nintendo: Fix an error handling path in nintendo_hid_probe()
  HID: logitech-dj: Fix memory leak in logi_dj_recv_switch_to_dj_mode()
  HID: core: remove unnecessary WARN_ON() in implement()
  HID: nvidia-shield: Add missing check for input_ff_create_memless
  HID: intel-ish-hid: Fix build error for COMPILE_TEST

13 months agoMerge tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 8 Jun 2024 17:12:33 +0000 (10:12 -0700)]
Merge tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix the initial state of the save button in 'make gconfig'

 - Improve the Kconfig documentation

 - Fix a Kconfig bug regarding property visibility

 - Fix build breakage for systems where 'sed' is not installed in /bin

 - Fix a false warning about missing MODULE_DESCRIPTION()

* tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  modpost: do not warn about missing MODULE_DESCRIPTION() for vmlinux.o
  kbuild: explicitly run mksysmap as sed script from link-vmlinux.sh
  kconfig: remove wrong expr_trans_bool()
  kconfig: doc: document behavior of 'select' and 'imply' followed by 'if'
  kconfig: doc: fix a typo in the note about 'imply'
  kconfig: gconf: give a proper initial state to the Save button
  kconfig: remove unneeded code for user-supplied values being out of range

13 months agoMerge tag 'media/v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
Linus Torvalds [Sat, 8 Jun 2024 16:57:09 +0000 (09:57 -0700)]
Merge tag 'media/v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:

 - fixes for the new ipu6 driver (and related fixes to mei csi driver)

 - fix a double debugfs remove logic at mgb4 driver

 - a documentation fix

* tag 'media/v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: intel/ipu6: add csi2 port sanity check in notifier bound
  media: intel/ipu6: update the maximum supported csi2 port number to 6
  media: mei: csi: Warn less verbosely of a missing device fwnode
  media: mei: csi: Put the IPU device reference
  media: intel/ipu6: fix the buffer flags caused by wrong parentheses
  media: intel/ipu6: Fix an error handling path in isys_probe()
  media: intel/ipu6: Move isys_remove() close to isys_probe()
  media: intel/ipu6: Fix some redundant resources freeing in ipu6_pci_remove()
  media: Documentation: v4l: Fix ACTIVE route flag
  media: mgb4: Fix double debugfs remove

13 months agoMerge tag 'irq-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 8 Jun 2024 16:44:50 +0000 (09:44 -0700)]
Merge tag 'irq-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq fixes from Ingo Molnar:

 - Fix possible memory leak the riscv-intc irqchip driver load failures

 - Fix boot crash in the sifive-plic irqchip driver caused by recently
   changed boot initialization order

 - Fix race condition in the gic-v3-its irqchip driver

* tag 'irq-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Fix potential race condition in its_vlpi_prop_update()
  irqchip/sifive-plic: Chain to parent IRQ after handlers are ready
  irqchip/riscv-intc: Prevent memory leak when riscv_intc_init_common() fails

13 months agoMerge tag 'x86-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 8 Jun 2024 16:36:08 +0000 (09:36 -0700)]
Merge tag 'x86-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
 "Miscellaneous fixes:

   - Fix kexec() crash if call depth tracking is enabled

   - Fix SMN reads on inaccessible registers on certain AMD systems"

* tag 'x86-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/amd_nb: Check for invalid SMN reads
  x86/kexec: Fix bug with call depth tracking

13 months agoMerge tag 'perf-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 8 Jun 2024 16:26:59 +0000 (09:26 -0700)]
Merge tag 'perf-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf event fix from Ingo Molnar:
 "Fix race between perf_event_free_task() and perf_event_release_kernel()
  that can result in missed wakeups and hung tasks"

* tag 'perf-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix missing wakeup when waiting for context reference

13 months agoMerge tag 'locking-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 8 Jun 2024 16:03:46 +0000 (09:03 -0700)]
Merge tag 'locking-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull locking doc fix from Ingo Molnar:
 "Fix typos in the kerneldoc of some of the atomic APIs"

* tag 'locking-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/atomic: scripts: fix ${atomic}_sub_and_test() kerneldoc

13 months agoMerge tag 'mm-hotfixes-stable-2024-06-07-15-24' of git://git.kernel.org/pub/scm/linux...
Linus Torvalds [Sat, 8 Jun 2024 00:01:10 +0000 (17:01 -0700)]
Merge tag 'mm-hotfixes-stable-2024-06-07-15-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "14 hotfixes, 6 of which are cc:stable.

  All except the nilfs2 fix affect MM and all are singletons - see the
  chagelogs for details"

* tag 'mm-hotfixes-stable-2024-06-07-15-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors
  mm: fix xyz_noprof functions calling profiled functions
  codetag: avoid race at alloc_slab_obj_exts
  mm/hugetlb: do not call vma_add_reservation upon ENOMEM
  mm/ksm: fix ksm_zero_pages accounting
  mm/ksm: fix ksm_pages_scanned accounting
  kmsan: do not wipe out origin when doing partial unpoisoning
  vmalloc: check CONFIG_EXECMEM in is_vmalloc_or_module_addr()
  mm: page_alloc: fix highatomic typing in multi-block buddies
  nilfs2: fix potential kernel bug due to lack of writeback flag waiting
  memcg: remove the lockdep assert from __mod_objcg_mlstate()
  mm: arm64: fix the out-of-bounds issue in contpte_clear_young_dirty_ptes
  mm: huge_mm: fix undefined reference to `mthp_stats' for CONFIG_SYSFS=n
  mm: drop the 'anon_' prefix for swap-out mTHP counters

13 months agoMerge tag 'gpio-fixes-for-v6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 7 Jun 2024 23:54:57 +0000 (16:54 -0700)]
Merge tag 'gpio-fixes-for-v6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:

 - interrupt handling and Kconfig fixes for gpio-tqmx86

 - add a buffer for storing output values in gpio-tqmx86 as reading back
   the registers always returns the input values

 - add missing MODULE_DESCRIPTION()s to several GPIO drivers

* tag 'gpio-fixes-for-v6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: add missing MODULE_DESCRIPTION() macros
  gpio: tqmx86: fix broken IRQ_TYPE_EDGE_BOTH interrupt type
  gpio: tqmx86: store IRQ trigger type and unmask status separately
  gpio: tqmx86: introduce shadow register for GPIO output value
  gpio: tqmx86: fix typo in Kconfig label

13 months agoMerge tag 'block-6.10-20240607' of git://git.kernel.dk/linux
Linus Torvalds [Fri, 7 Jun 2024 23:45:48 +0000 (16:45 -0700)]
Merge tag 'block-6.10-20240607' of git://git.kernel.dk/linux

Pull block fixes from Jens Axboe:

 - Fix for null_blk block size validation (Andreas)

 - NVMe pull request via Keith:
      - Use reserved tags for special fabrics operations (Chunguang)
      - Persistent Reservation status masking fix (Weiwen)

* tag 'block-6.10-20240607' of git://git.kernel.dk/linux:
  null_blk: fix validation of block size
  nvme: fix nvme_pr_* status code parsing
  nvme-fabrics: use reserved tag for reg read/write command

13 months agoMerge tag 'io_uring-6.10-20240607' of git://git.kernel.dk/linux
Linus Torvalds [Fri, 7 Jun 2024 23:43:07 +0000 (16:43 -0700)]
Merge tag 'io_uring-6.10-20240607' of git://git.kernel.dk/linux

Pull io_uring fixes from Jens Axboe:

 - Fix a locking order issue with setting max async thread workers
   (Hagar)

 - Fix for a NULL pointer dereference for failed async flagged requests
   using ring provided buffers. This doesn't affect the current kernel,
   but it does affect older kernels, and is being queued up for 6.10
   just to make the stable process easier (me)

 - Fix for NAPI timeout calculations for how long to busy poll, and
   subsequently how much to sleep post that if a wait timeout is passed
   in (me)

 - Fix for a regression in this release cycle, where we could end up
   using a partially unitialized match value for io-wq (Su)

* tag 'io_uring-6.10-20240607' of git://git.kernel.dk/linux:
  io_uring: fix possible deadlock in io_register_iowq_max_workers()
  io_uring/io-wq: avoid garbage value of 'match' in io_wq_enqueue()
  io_uring/napi: fix timeout calculation
  io_uring: check for non-NULL file pointer in io_file_can_poll()

13 months agoMerge tag 'for-6.10-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave...
Linus Torvalds [Fri, 7 Jun 2024 22:13:12 +0000 (15:13 -0700)]
Merge tag 'for-6.10-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:

 - fix handling of folio private changes.

   The private value holds pointer to our extent buffer structure
   representing a metadata range. Release and create of the range was
   not properly synchronized when updating the private bit which ended
   up in double folio_put, leading to all sorts of breakage

 - fix a crash, reported as duplicate key in metadata, but caused by a
   race of fsync and size extending write. Requires prealloc target
   range + fsync and other conditions (log tree state, timing)

 - fix leak of qgroup extent records after transaction abort

* tag 'for-6.10-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: protect folio::private when attaching extent buffer folios
  btrfs: fix leak of qgroup extent records after transaction abort
  btrfs: fix crash on racing fsync and size-extending write into prealloc

13 months agoMerge tag 'nfsd-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Linus Torvalds [Fri, 7 Jun 2024 22:07:57 +0000 (15:07 -0700)]
Merge tag 'nfsd-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux

Pull nfsd fix from Chuck Lever:

 - Fix an occasional memory overwrite caused by a fix added in 6.10

* tag 'nfsd-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  SUNRPC: Fix loop termination condition in gss_free_in_token_pages()

13 months agoMerge tag 'riscv-for-linus-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 7 Jun 2024 21:47:38 +0000 (14:47 -0700)]
Merge tag 'riscv-for-linus-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

 - Another fix to avoid allocating pages that overlap with ERR_PTR,
   which manifests on rv32

 - A revert for the badaccess patch I incorrectly picked up an early
   version of

* tag 'riscv-for-linus-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  Revert "riscv: mm: accelerate pagefault when badaccess"
  riscv: fix overlap of allocated page and PTR_ERR

13 months agoMerge tag 's390-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Linus Torvalds [Fri, 7 Jun 2024 21:44:53 +0000 (14:44 -0700)]
Merge tag 's390-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 fixes from Alexander Gordeev:

 - Do not create PT_LOAD program header for the kenel image when the
   virtual memory informaton in OS_INFO data is not available. That
   fixes stand-alone dump failures against kernels that do not provide
   the virtual memory informaton

 - Add KVM s390 shared zeropage selftest

* tag 's390-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  KVM: s390x: selftests: Add shared zeropage test
  s390/crash: Do not use VM info if os_info does not have it

13 months agoMerge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Linus Torvalds [Fri, 7 Jun 2024 21:36:57 +0000 (14:36 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:

 - Fix spurious CPU hotplug warning message from SETEND emulation code

 - Fix the build when GCC wasn't inlining our I/O accessor internals

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/io: add constant-argument check
  arm64: armv8_deprecated: Fix warning in isndep cpuhp starting process

13 months agoMerge tag 'platform-drivers-x86-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 7 Jun 2024 21:13:46 +0000 (14:13 -0700)]
Merge tag 'platform-drivers-x86-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

 -  Default silead touchscreen driver to 10 fingers and drop 10 finger
    setting from all DMI quirks. More of a cleanup then a pure fix, but
    since the DMI quirks always get updated through the fixes branch
    this avoids conflicts.

 -  Kconfig fix for randconfig builds

 -  dell-smbios: Fix wrong token data in sysfs

 -  amd-hsmp: Fix driver poking unsupported hw when loaded manually

* tag 'platform-drivers-x86-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86/amd/hsmp: Check HSMP support on AMD family of processors
  platform/x86: dell-smbios: Simplify error handling
  platform/x86: dell-smbios: Fix wrong token data in sysfs
  platform/x86: yt2-1380: add CONFIG_EXTCON dependency
  platform/x86: touchscreen_dmi: Use 2-argument strscpy()
  platform/x86: touchscreen_dmi: Drop "silead,max-fingers" property
  Input: silead - Always support 10 fingers

13 months agoMerge tag 'iommu-fixes-v6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 7 Jun 2024 20:34:53 +0000 (13:34 -0700)]
Merge tag 'iommu-fixes-v6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull iommu fixes from Joerg Roedel:
 "Core:

   - Make iommu-dma code recognize 'force_aperture' again

   - Fix for potential NULL-ptr dereference from iommu_sva_bind_device()
     return value

  AMD IOMMU fixes:

   - Fix lockdep splat for invalid wait context

   - Add feature bit check before enabling PPR

   - Make workqueue name fit into buffer

   - Fix memory leak in sysfs code"

* tag 'iommu-fixes-v6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Fix Invalid wait context issue
  iommu/amd: Check EFR[EPHSup] bit before enabling PPR
  iommu/amd: Fix workqueue name
  iommu: Return right value in iommu_sva_bind_device()
  iommu/dma: Fix domain init
  iommu/amd: Fix sysfs leak in iommu init

13 months agoMerge tag 'ata-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata...
Linus Torvalds [Fri, 7 Jun 2024 19:47:20 +0000 (12:47 -0700)]
Merge tag 'ata-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux

Pull ata fix from Niklas Cassel:

 - Fix a regression for the PATA MacIO driver were it would fail to
   probe because of the recent changes of initializing the limits in
   SCSI core

* tag 'ata-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
  ata: pata_macio: Fix max_segment_size with PAGE_SIZE == 64K

13 months agoMerge tag 'drm-fixes-2024-06-07' of https://gitlab.freedesktop.org/drm/kernel
Linus Torvalds [Fri, 7 Jun 2024 19:35:56 +0000 (12:35 -0700)]
Merge tag 'drm-fixes-2024-06-07' of https://gitlab.freedesktop.org/drm/kernel

Pull drm fixes from Dave Airlie:
 "Weekly fixes: vmwgfx leads the way this week, with minor changes in xe
  and amdgpu and a couple of other small fixes.

  Seems quiet enough.

  xe:
   - Update the LMTT when freeing VF GT config

  amdgpu:
   - Fix shutdown issues on some SMU 13.x platforms
   - Silence some UBSAN flexible array warnings

  panel:
   - sitronix-st7789v: handle of_drm_get_panel_orientation failing
     error

  vmwgfx:
   - filter modes greater than available graphics memory
   - fix 3D vs STDU enable
   - remove STDU logic from mode valid
   - logging fix
   - memcmp pointers fix
   - remove unused struct
   - screen target lifetime fix

  komeda:
   - unused struct removal"

* tag 'drm-fixes-2024-06-07' of https://gitlab.freedesktop.org/drm/kernel:
  drm/vmwgfx: Don't memcmp equivalent pointers
  drm/vmwgfx: remove unused struct 'vmw_stdu_dma'
  drm/vmwgfx: Don't destroy Screen Target when CRTC is enabled but inactive
  drm/vmwgfx: Standardize use of kibibytes when logging
  drm/vmwgfx: Remove STDU logic from generic mode_valid function
  drm/vmwgfx: 3D disabled should not effect STDU memory limits
  drm/vmwgfx: Filter modes which exceed graphics memory
  drm/amdgpu/pptable: Fix UBSAN array-index-out-of-bounds
  drm/amd: Fix shutdown (again) on some SMU v13.0.4/11 platforms
  drm/xe/pf: Update the LMTT when freeing VF GT config
  drm/panel: sitronix-st7789v: Add check for of_drm_get_panel_orientation
  drm/komeda: remove unused struct 'gamma_curve_segment'

13 months agoHID: Ignore battery for ELAN touchscreens 2F2C and 4116
Louis Dalibard [Fri, 7 Jun 2024 14:53:43 +0000 (16:53 +0200)]
HID: Ignore battery for ELAN touchscreens 2F2C and 4116

At least ASUS Zenbook 14 (2023) and ASUS Zenbook 14 Pro (2023) are affected.

The touchscreen reports a battery status of 0% and jumps to 1% when a
stylus is used.

The device ID was added and the battery ignore quirk was enabled for it.

[jkosina@suse.com: reformatted changelog a bit]
Signed-off-by: Louis Dalibard <ontake@ontake.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
13 months agoHID: i2c-hid: elan: fix reset suspend current leakage
Johan Hovold [Tue, 7 May 2024 14:48:18 +0000 (16:48 +0200)]
HID: i2c-hid: elan: fix reset suspend current leakage

The Elan eKTH5015M touch controller found on the Lenovo ThinkPad X13s
shares the VCC33 supply with other peripherals that may remain powered
during suspend (e.g. when enabled as wakeup sources).

The reset line is also wired so that it can be left deasserted when the
supply is off.

This is important as it avoids holding the controller in reset for
extended periods of time when it remains powered, which can lead to
increased power consumption, and also avoids leaking current through the
X13s reset circuitry during suspend (and after driver unbind).

Use the new 'no-reset-on-power-off' devicetree property to determine
when reset needs to be asserted on power down.

Notably this also avoids wasting power on machine variants without a
touchscreen for which the driver would otherwise exit probe with reset
asserted.

Fixes: bd3cba00dcc6 ("HID: i2c-hid: elan: Add support for Elan eKTH6915 i2c-hid touchscreens")
Cc: <stable@vger.kernel.org> # 6.0
Cc: Douglas Anderson <dianders@chromium.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240507144821.12275-5-johan+linaro@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
13 months agodt-bindings: HID: i2c-hid: elan: add 'no-reset-on-power-off' property
Johan Hovold [Tue, 7 May 2024 14:48:17 +0000 (16:48 +0200)]
dt-bindings: HID: i2c-hid: elan: add 'no-reset-on-power-off' property

When the power supply is shared with other peripherals the reset line
can be wired in such a way that it can remain deasserted regardless of
whether the supply is on or not.

This is important as it can be used to avoid holding the controller in
reset for extended periods of time when it remains powered, something
which can lead to increased power consumption. Leaving reset deasserted
also avoids leaking current through the reset circuitry pull-up
resistors.

Add a new 'no-reset-on-power-off' devicetree property which can be used
by the OS to determine when reset needs to be asserted on power down.

Note that this property can also be used when the supply cannot be
turned off by the OS at all.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240507144821.12275-4-johan+linaro@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
13 months agodt-bindings: HID: i2c-hid: elan: add Elan eKTH5015M
Johan Hovold [Tue, 7 May 2024 14:48:16 +0000 (16:48 +0200)]
dt-bindings: HID: i2c-hid: elan: add Elan eKTH5015M

Add a compatible string for the Elan eKTH5015M touch controller.

Judging from the current binding and commit bd3cba00dcc6 ("HID: i2c-hid:
elan: Add support for Elan eKTH6915 i2c-hid touchscreens"), eKTH5015M
appears to be compatible with eKTH6915. Notably the power-on sequence is
the same.

While at it, drop a redundant label from the example.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240507144821.12275-3-johan+linaro@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
13 months agodt-bindings: HID: i2c-hid: add dedicated Ilitek ILI2901 schema
Johan Hovold [Tue, 7 May 2024 14:48:15 +0000 (16:48 +0200)]
dt-bindings: HID: i2c-hid: add dedicated Ilitek ILI2901 schema

The Ilitek ILI2901 touch screen controller was apparently incorrectly
added to the Elan eKTH6915 schema simply because it also has a reset
gpio and is currently managed by the Elan driver in Linux.

The two controllers are not related even if an unfortunate wording in
the commit message adding the Ilitek compatible made it sound like they
were.

Add a dedicated schema for the ILI2901 which does not specify the I2C
address (which is likely 0x41 rather than 0x10 as for other Ilitek touch
controllers) to avoid cluttering the Elan schema with unrelated devices
and to make it easier to find the correct schema when adding further
Ilitek controllers.

Fixes: d74ac6f60a7e ("dt-bindings: HID: i2c-hid: elan: Introduce Ilitek ili2901")
Cc: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240507144821.12275-2-johan+linaro@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
13 months agoinput: Add support for "Do Not Disturb"
Aseda Aboagye [Tue, 4 Jun 2024 23:16:32 +0000 (23:16 +0000)]
input: Add support for "Do Not Disturb"

HUTRR94 added support for a new usage titled "System Do Not Disturb"
which toggles a system-wide Do Not Disturb setting. This commit simply
adds a new event code for the usage.

Signed-off-by: Aseda Aboagye <aaboagye@chromium.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/Zl-gUHE70s7wCAoB@google.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
13 months agoinput: Add event code for accessibility key
Aseda Aboagye [Tue, 4 Jun 2024 23:10:47 +0000 (23:10 +0000)]
input: Add event code for accessibility key

HUTRR116 added support for a new usage titled "System Accessibility
Binding" which toggles a system-wide bound accessibility UI or command.
This commit simply adds a new event code for the usage.

Signed-off-by: Aseda Aboagye <aaboagye@chromium.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/Zl-e97O9nvudco5z@google.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
13 months agohid: asus: asus_report_fixup: fix potential read out of bounds
Andrew Ballance [Sun, 2 Jun 2024 08:50:23 +0000 (03:50 -0500)]
hid: asus: asus_report_fixup: fix potential read out of bounds

syzbot reported a potential read out of bounds in asus_report_fixup.

this patch adds checks so that a read out of bounds will not occur

Signed-off-by: Andrew Ballance <andrewjballance@gmail.com>
Reported-by: <syzbot+07762f019fd03d01f04c@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=07762f019fd03d01f04c
Fixes: 59d2f5b7392e ("HID: asus: fix more n-key report descriptors if n-key quirked")
Link: https://lore.kernel.org/r/20240602085023.1720492-1-andrewjballance@gmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
13 months agogpio: add missing MODULE_DESCRIPTION() macros
Jeff Johnson [Fri, 7 Jun 2024 03:23:50 +0000 (20:23 -0700)]
gpio: add missing MODULE_DESCRIPTION() macros

On x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpio/gpio-gw-pld.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpio/gpio-mc33880.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpio/gpio-pcf857x.o

Add the missing invocations of the MODULE_DESCRIPTION() macro,
including the one missing in gpio-pl061.c, which is not built for x86.

Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240606-md-drivers-gpio-v1-1-cb42d240ca5c@quicinc.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
13 months agocifs: Don't advance the I/O iterator before terminating subrequest
David Howells [Fri, 31 May 2024 14:53:42 +0000 (15:53 +0100)]
cifs: Don't advance the I/O iterator before terminating subrequest

There's now no need to make sure subreq->io_iter is advanced to match
subreq->transferred before calling one of the netfs subrequest termination
functions as the check has been removed netfslib and the iterator is reset
prior to retrying a subreq.

Fixes: 3ee1a1fc3981 ("cifs: Cut over to using netfslib")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: Steve French <stfrench@microsoft.com>
13 months agosmb: client: fix deadlock in smb2_find_smb_tcon()
Enzo Matsumiya [Thu, 6 Jun 2024 16:13:13 +0000 (13:13 -0300)]
smb: client: fix deadlock in smb2_find_smb_tcon()

Unlock cifs_tcp_ses_lock before calling cifs_put_smb_ses() to avoid such
deadlock.

Cc: stable@vger.kernel.org
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
13 months agomodpost: do not warn about missing MODULE_DESCRIPTION() for vmlinux.o
Masahiro Yamada [Thu, 6 Jun 2024 18:36:12 +0000 (03:36 +0900)]
modpost: do not warn about missing MODULE_DESCRIPTION() for vmlinux.o

Building with W=1 incorrectly emits the following warning:

  WARNING: modpost: missing MODULE_DESCRIPTION() in vmlinux.o

This check should apply only to modules.

Fixes: 1fffe7a34c89 ("script: modpost: emit a warning when the description is missing")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
13 months agokbuild: explicitly run mksysmap as sed script from link-vmlinux.sh
Richard Acayan [Wed, 5 Jun 2024 17:58:09 +0000 (13:58 -0400)]
kbuild: explicitly run mksysmap as sed script from link-vmlinux.sh

In commit b18b047002b7 ("kbuild: change scripts/mksysmap into sed
script"), the mksysmap script was transformed into a sed script,
made directly executable with "#!/bin/sed -f". Apparently, the path to
sed is different on NixOS.

The shebang can't use the env command, otherwise the "sed -f" command
would be treated as a single argument. This can be solved with the -S
flag, but that is a GNU extension. Explicitly use sed instead of relying
on the executable shebang to fix NixOS builds without breaking build
environments using Busybox.

Fixes: b18b047002b7 ("kbuild: change scripts/mksysmap into sed script")
Reported-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
13 months agoMerge tag 'drm-misc-next-fixes-2024-06-07' of https://gitlab.freedesktop.org/drm...
Dave Airlie [Thu, 6 Jun 2024 22:40:57 +0000 (08:40 +1000)]
Merge tag 'drm-misc-next-fixes-2024-06-07' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes

drm-misc-next-fixes for v6.10-rc3:
- Single unused struct removal that should have been in -fixes.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0251b6ae-bffa-44b2-b698-955712c25a27@linux.intel.com
13 months agoMerge tag 'drm-misc-fixes-2024-06-07' of https://gitlab.freedesktop.org/drm/misc...
Dave Airlie [Thu, 6 Jun 2024 22:37:25 +0000 (08:37 +1000)]
Merge tag 'drm-misc-fixes-2024-06-07' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes

drm-misc-fixes for v6.10-rc3:
- Robustness fixes for vmwgfx.
- Error check for of_drm_get_panel_orientation failing in
  sitronix-st7789v.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d5645d00-a8cf-47d9-a2a0-4ff55842fc7d@linux.intel.com
13 months agoMerge tag 'amd-drm-fixes-6.10-2024-06-06' of https://gitlab.freedesktop.org/agd5f...
Dave Airlie [Thu, 6 Jun 2024 22:22:08 +0000 (08:22 +1000)]
Merge tag 'amd-drm-fixes-6.10-2024-06-06' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.10-2024-06-06:

amdgpu:
- Fix shutdown issues on some SMU 13.x platforms
- Silence some UBSAN flexible array warnings

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240606192348.3620805-1-alexander.deucher@amd.com
13 months agoMerge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Linus Torvalds [Thu, 6 Jun 2024 21:40:51 +0000 (14:40 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "The core change is to detect unusually large number of VPD pages
  (caused by device manufacturers having an endiannes issue) and reject
  them rather than trying to parse a huge non-existent array.

  The remaining fixes are in drivers the most user visible of which is
  the ALUA state transition recognition (leads to intermittent I/O
  errors in some situations otherwise)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: mcq: Fix error output and clean up ufshcd_mcq_abort()
  scsi: core: Handle devices which return an unusually large VPD page count
  scsi: mpt3sas: Add missing kerneldoc parameter descriptions
  scsi: qedf: Set qed_slowpath_params to zero before use
  scsi: qedf: Wait for stag work during unload
  scsi: qedf: Don't process stag work during unload and recovery
  scsi: sr: Fix unintentional arithmetic wraparound
  scsi: core: alua: I/O errors for ALUA state transitions
  scsi: mpi3mr: Use proper format specifier in mpi3mr_sas_port_add()

13 months agoMerge tag 'pci-v6.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Linus Torvalds [Thu, 6 Jun 2024 21:28:11 +0000 (14:28 -0700)]
Merge tag 'pci-v6.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci fix from Bjorn Helgaas:

 - Revert lockdep checking on locking that protects device resets from
   user-space config accesses; it exposed issues for which fixes are in
   the works but are too risky for this cycle (Dan Williams)

* tag 'pci-v6.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  PCI: Revert the cfg_access_lock lockdep mechanism

13 months agobtrfs: protect folio::private when attaching extent buffer folios
Qu Wenruo [Thu, 6 Jun 2024 01:31:51 +0000 (11:01 +0930)]
btrfs: protect folio::private when attaching extent buffer folios

[BUG]
Since v6.8 there are rare kernel crashes reported by various people,
the common factor is bad page status error messages like this:

  BUG: Bad page state in process kswapd0  pfn:d6e840
  page: refcount:0 mapcount:0 mapping:000000007512f4f2 index:0x2796c2c7c
  pfn:0xd6e840
  aops:btree_aops ino:1
  flags: 0x17ffffe0000008(uptodate|node=0|zone=2|lastcpupid=0x3fffff)
  page_type: 0xffffffff()
  raw: 0017ffffe0000008 dead000000000100 dead000000000122 ffff88826d0be4c0
  raw: 00000002796c2c7c 0000000000000000 00000000ffffffff 0000000000000000
  page dumped because: non-NULL mapping

[CAUSE]
Commit 09e6cef19c9f ("btrfs: refactor alloc_extent_buffer() to
allocate-then-attach method") changes the sequence when allocating a new
extent buffer.

Previously we always called grab_extent_buffer() under
mapping->i_private_lock, to ensure the safety on modification on
folio::private (which is a pointer to extent buffer for regular
sectorsize).

This can lead to the following race:

Thread A is trying to allocate an extent buffer at bytenr X, with 4
4K pages, meanwhile thread B is trying to release the page at X + 4K
(the second page of the extent buffer at X).

           Thread A                |                 Thread B
-----------------------------------+-------------------------------------
                                   | btree_release_folio()
   | | This is for the page at X + 4K,
   | | Not page X.
   | |
alloc_extent_buffer()              | |- release_extent_buffer()
|- filemap_add_folio() for the     | |  |- atomic_dec_and_test(eb->refs)
|  page at bytenr X (the first     | |  |
|  page).                          | |  |
|  Which returned -EEXIST.         | |  |
|                                  | |  |
|- filemap_lock_folio()            | |  |
|  Returned the first page locked. | |  |
|                                  | |  |
|- grab_extent_buffer()            | |  |
|  |- atomic_inc_not_zero()        | |  |
|  |  Returned false               | |  |
|  |- folio_detach_private()       | |  |- folio_detach_private() for X
|     |- folio_test_private()      | |     |- folio_test_private()
      |  Returned true             | |     |  Returned true
      |- folio_put()               |       |- folio_put()

Now there are two puts on the same folio at folio X, leading to refcount
underflow of the folio X, and eventually causing the BUG_ON() on the
page->mapping.

The condition is not that easy to hit:

- The release must be triggered for the middle page of an eb
  If the release is on the same first page of an eb, page lock would kick
  in and prevent the race.

- folio_detach_private() has a very small race window
  It's only between folio_test_private() and folio_clear_private().

That's exactly when mapping->i_private_lock is used to prevent such race,
and commit 09e6cef19c9f ("btrfs: refactor alloc_extent_buffer() to
allocate-then-attach method") screwed that up.

At that time, I thought the page lock would kick in as
filemap_release_folio() also requires the page to be locked, but forgot
the filemap_release_folio() only locks one page, not all pages of an
extent buffer.

[FIX]
Move all the code requiring i_private_lock into
attach_eb_folio_to_filemap(), so that everything is done with proper
lock protection.

Furthermore to prevent future problems, add an extra
lockdep_assert_locked() to ensure we're holding the proper lock.

To reproducer that is able to hit the race (takes a few minutes with
instrumented code inserting delays to alloc_extent_buffer()):

  #!/bin/sh
  drop_caches () {
  while(true); do
  echo 3 > /proc/sys/vm/drop_caches
  echo 1 > /proc/sys/vm/compact_memory
  done
  }

  run_tar () {
  while(true); do
  for x in `seq 1 80` ; do
  tar cf /dev/zero /mnt > /dev/null &
  done
  wait
  done
  }

  mkfs.btrfs -f -d single -m single /dev/vda
  mount -o noatime /dev/vda /mnt
  # create 200,000 files, 1K each
  ./simoop -n 200000 -E -f 1k /mnt
  drop_caches &
  (run_tar)

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/linux-btrfs/CAHk-=wgt362nGfScVOOii8cgKn2LVVHeOvOA7OBwg1OwbuJQcw@mail.gmail.com/
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Link: https://lore.kernel.org/lkml/CABXGCsPktcHQOvKTbPaTwegMExije=Gpgci5NW=hqORo-s7diA@mail.gmail.com/
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Link: https://lore.kernel.org/linux-btrfs/e8b3311c-9a75-4903-907f-fc0f7a3fe423@gmx.de/
Reported-by: syzbot+f80b066392366b4af85e@syzkaller.appspotmail.com
Fixes: 09e6cef19c9f ("btrfs: refactor alloc_extent_buffer() to allocate-then-attach method")
CC: stable@vger.kernel.org # 6.8+
CC: Chris Mason <clm@fb.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agodrm/xe: move disable_c6 call
Riana Tauro [Thu, 6 Jun 2024 10:08:42 +0000 (15:38 +0530)]
drm/xe: move disable_c6 call

disable c6 called in guc_pc_fini_hw is unreachable.

GuC PC init returns earlier if skip_guc_pc is true and never
registers the finish call thus making disable_c6 unreachable.

move this call to gt idle.

v2: rebase
v3: add fixes tag (Himal)

Fixes: 975e4a3795d4 ("drm/xe: Manually setup C6 when skip_guc_pc is set")
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240606100842.956072-3-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
13 months agodrm/xe/xe_gt_idle: use GT forcewake domain assertion
Riana Tauro [Thu, 6 Jun 2024 10:08:41 +0000 (15:38 +0530)]
drm/xe/xe_gt_idle: use GT forcewake domain assertion

The rc6 registers used in disable_c6 function belong
to the GT forcewake domain. Hence change the forcewake
assertion to check GT forcewake domain.

v2: add fixes tag (Himal)

Fixes: 975e4a3795d4 ("drm/xe: Manually setup C6 when skip_guc_pc is set")
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240606100842.956072-2-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
13 months agodrm/xe/xe_gt_debugfs: Add synchronous gt reset debugfs
Jonathan Cavitt [Wed, 5 Jun 2024 15:08:28 +0000 (08:08 -0700)]
drm/xe/xe_gt_debugfs: Add synchronous gt reset debugfs

We currently have debugfs support that allows the userspace to initiate
an asynchronous gt reset on command.  However, userspace may also wish
to wait for the completion of the gt reset before performing any
additional work.  To that end, add a version of the force_reset gt
debugfs function that operates synchronously.

Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1068
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
CC: John Harrison <john.c.harrison@intel.com>
CC: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240605150828.2736396-1-jonathan.cavitt@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
13 months agoMerge tag 'net-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Linus Torvalds [Thu, 6 Jun 2024 16:55:27 +0000 (09:55 -0700)]
Merge tag 'net-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Including fixes from BPF and big collection of fixes for WiFi core and
  drivers.

  Current release - regressions:

   - vxlan: fix regression when dropping packets due to invalid src
     addresses

   - bpf: fix a potential use-after-free in bpf_link_free()

   - xdp: revert support for redirect to any xsk socket bound to the
     same UMEM as it can result in a corruption

   - virtio_net:
      - add missing lock protection when reading return code from
        control_buf
      - fix false-positive lockdep splat in DIM
      - Revert "wifi: wilc1000: convert list management to RCU"

   - wifi: ath11k: fix error path in ath11k_pcic_ext_irq_config

  Previous releases - regressions:

   - rtnetlink: make the "split" NLM_DONE handling generic, restore the
     old behavior for two cases where we started coalescing those
     messages with normal messages, breaking sloppily-coded userspace

   - wifi:
      - cfg80211: validate HE operation element parsing
      - cfg80211: fix 6 GHz scan request building
      - mt76: mt7615: add missing chanctx ops
      - ath11k: move power type check to ASSOC stage, fix connecting to
        6 GHz AP
      - ath11k: fix WCN6750 firmware crash caused by 17 num_vdevs
      - rtlwifi: ignore IEEE80211_CONF_CHANGE_RETRY_LIMITS
      - iwlwifi: mvm: fix a crash on 7265

  Previous releases - always broken:

   - ncsi: prevent multi-threaded channel probing, a spec violation

   - vmxnet3: disable rx data ring on dma allocation failure

   - ethtool: init tsinfo stats if requested, prevent unintentionally
     reporting all-zero stats on devices which don't implement any

   - dst_cache: fix possible races in less common IPv6 features

   - tcp: auth: don't consider TCP_CLOSE to be in TCP_AO_ESTABLISHED

   - ax25: fix two refcounting bugs

   - eth: ionic: fix kernel panic in XDP_TX action

  Misc:

   - tcp: count CLOSE-WAIT sockets for TCP_MIB_CURRESTAB"

* tag 'net-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits)
  selftests: net: lib: set 'i' as local
  selftests: net: lib: avoid error removing empty netns name
  selftests: net: lib: support errexit with busywait
  net: ethtool: fix the error condition in ethtool_get_phy_stats_ethtool()
  ipv6: fix possible race in __fib6_drop_pcpu_from()
  af_unix: Annotate data-race of sk->sk_shutdown in sk_diag_fill().
  af_unix: Use skb_queue_len_lockless() in sk_diag_show_rqlen().
  af_unix: Use skb_queue_empty_lockless() in unix_release_sock().
  af_unix: Use unix_recvq_full_lockless() in unix_stream_connect().
  af_unix: Annotate data-race of net->unx.sysctl_max_dgram_qlen.
  af_unix: Annotate data-races around sk->sk_sndbuf.
  af_unix: Annotate data-races around sk->sk_state in UNIX_DIAG.
  af_unix: Annotate data-race of sk->sk_state in unix_stream_read_skb().
  af_unix: Annotate data-races around sk->sk_state in sendmsg() and recvmsg().
  af_unix: Annotate data-race of sk->sk_state in unix_accept().
  af_unix: Annotate data-race of sk->sk_state in unix_stream_connect().
  af_unix: Annotate data-races around sk->sk_state in unix_write_space() and poll().
  af_unix: Annotate data-race of sk->sk_state in unix_inq_len().
  af_unix: Annodate data-races around sk->sk_state for writers.
  af_unix: Set sk->sk_state under unix_state_lock() for truly disconencted peer.
  ...

13 months agoMerge tag 'tomoyo-pr-20240606' of git://git.code.sf.net/p/tomoyo/tomoyo
Linus Torvalds [Thu, 6 Jun 2024 16:48:57 +0000 (09:48 -0700)]
Merge tag 'tomoyo-pr-20240606' of git://git.code.sf.net/p/tomoyo/tomoyo

Pull tomoyo fixlet from Tetsuo Handa:
 "Single patch to update project links, no behavior changes"

* tag 'tomoyo-pr-20240606' of git://git.code.sf.net/p/tomoyo/tomoyo:
  tomoyo: update project links

13 months agoMerge tag 'efi-fixes-for-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 6 Jun 2024 16:39:36 +0000 (09:39 -0700)]
Merge tag 'efi-fixes-for-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi

Pull EFI fixes from Ard Biesheuvel:

 - Ensure that .discard sections are really discarded in the EFI zboot
   image build

 - Return proper error numbers from efi-pstore

 - Add __nocfi annotations to EFI runtime wrappers

* tag 'efi-fixes-for-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: Add missing __nocfi annotations to runtime wrappers
  efi: pstore: Return proper errors on UEFI failures
  efi/libstub: zboot.lds: Discard .discard sections

13 months agodrm/xe: Do not dereference NULL job->fence in trace points
Matthew Brost [Wed, 5 Jun 2024 05:50:41 +0000 (22:50 -0700)]
drm/xe: Do not dereference NULL job->fence in trace points

job->fence is not assigned until xe_sched_job_arm(), check for
job->fence in xe_sched_job_seqno() so any usage of this function (trace
points) do not result in NULL ptr dereference. Also check job->fence
before assigning error in job trace points.

Fixes: 0ac7a2c745e8 ("drm/xe: Don't initialize fences at xe_sched_job_create()")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240605055041.2082074-1-matthew.brost@intel.com
13 months agoMerge branch 'selftests-net-lib-small-fixes'
Jakub Kicinski [Thu, 6 Jun 2024 15:23:44 +0000 (08:23 -0700)]
Merge branch 'selftests-net-lib-small-fixes'

Matthieu Baerts says:

====================
selftests: net: lib: small fixes

While looking at using 'lib.sh' for the MPTCP selftests [1], we found
some small issues with 'lib.sh'. Here they are:

- Patch 1: fix 'errexit' (set -e) support with busywait. 'errexit' is
  supported in some functions, not all. A fix for v6.8+.

- Patch 2: avoid confusing error messages linked to the cleaning part
  when the netns setup fails. A fix for v6.8+.

- Patch 3: set a variable as local to avoid accidentally changing the
  value of a another one with the same name on the caller side. A fix
  for v6.10-rc1+.

Link: https://lore.kernel.org/mptcp/5f4615c3-0621-43c5-ad25-55747a4350ce@kernel.org/T/
====================

Link: https://lore.kernel.org/r/20240605-upstream-net-20240605-selftests-net-lib-fixes-v1-0-b3afadd368c9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
13 months agoselftests: net: lib: set 'i' as local
Matthieu Baerts (NGI0) [Wed, 5 Jun 2024 09:21:18 +0000 (11:21 +0200)]
selftests: net: lib: set 'i' as local

Without this, the 'i' variable declared before could be overridden by
accident, e.g.

  for i in "${@}"; do
      __ksft_status_merge "${i}"  ## 'i' has been modified
      foo "${i}"                  ## using 'i' with an unexpected value
  done

After a quick look, it looks like 'i' is currently not used after having
been modified in __ksft_status_merge(), but still, better be safe than
sorry. I saw this while modifying the same file, not because I suspected
an issue somewhere.

Fixes: 596c8819cb78 ("selftests: forwarding: Have RET track kselftest framework constants")
Acked-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240605-upstream-net-20240605-selftests-net-lib-fixes-v1-3-b3afadd368c9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
13 months agoselftests: net: lib: avoid error removing empty netns name
Matthieu Baerts (NGI0) [Wed, 5 Jun 2024 09:21:17 +0000 (11:21 +0200)]
selftests: net: lib: avoid error removing empty netns name

If there is an error to create the first netns with 'setup_ns()',
'cleanup_ns()' will be called with an empty string as first parameter.

The consequences is that 'cleanup_ns()' will try to delete an invalid
netns, and wait 20 seconds if the netns list is empty.

Instead of just checking if the name is not empty, convert the string
separated by spaces to an array. Manipulating the array is cleaner, and
calling 'cleanup_ns()' with an empty array will be a no-op.

Fixes: 25ae948b4478 ("selftests/net: add lib.sh")
Cc: stable@vger.kernel.org
Acked-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240605-upstream-net-20240605-selftests-net-lib-fixes-v1-2-b3afadd368c9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
13 months agoselftests: net: lib: support errexit with busywait
Matthieu Baerts (NGI0) [Wed, 5 Jun 2024 09:21:16 +0000 (11:21 +0200)]
selftests: net: lib: support errexit with busywait

If errexit is enabled ('set -e'), loopy_wait -- or busywait and others
using it -- will stop after the first failure.

Note that if the returned status of loopy_wait is checked, and even if
errexit is enabled, Bash will not stop at the first error.

Fixes: 25ae948b4478 ("selftests/net: add lib.sh")
Cc: stable@vger.kernel.org
Acked-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240605-upstream-net-20240605-selftests-net-lib-fixes-v1-1-b3afadd368c9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
13 months agodrm/xe/vf: Custom GT restart
Michal Wajdeczko [Tue, 4 Jun 2024 21:22:31 +0000 (23:22 +0200)]
drm/xe/vf: Custom GT restart

Only few steps from the GT restart phase are applicable for the
VF drivers, as initialization of PAT, WOPCM, MOCS or CCS mode can
be done only by the native or PF drivers. Use custom GT restart
function if running in VF mode.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604212231.1416-5-michal.wajdeczko@intel.com
13 months agodrm/xe/vf: Custom GuC reset
Michal Wajdeczko [Tue, 4 Jun 2024 21:22:30 +0000 (23:22 +0200)]
drm/xe/vf: Custom GuC reset

The VF drivers can't trigger real GuC firmware reset using GDRST
register, but for the VF drivers it is sufficient to send VF_RESET
message to reset any VF specific state maintained by the GuC.
Use our existing VF bootstrap function as VF_RESET is part of it.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604212231.1416-4-michal.wajdeczko@intel.com
13 months agodrm/xe/vf: Custom uC initialization
Michal Wajdeczko [Tue, 4 Jun 2024 21:22:29 +0000 (23:22 +0200)]
drm/xe/vf: Custom uC initialization

VF drivers can't modify WOPCM registers nor upload firmwares to
GuC, HuC or GSC.  Modify xe_uc initialization functions to skip
those steps if running in the VF mode, or defer to a new custom
helper function that would not include those steps.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604212231.1416-3-michal.wajdeczko@intel.com
13 months agodrm/xe/vf: Support only GuC/HuC firmwares
Michal Wajdeczko [Tue, 4 Jun 2024 21:22:28 +0000 (23:22 +0200)]
drm/xe/vf: Support only GuC/HuC firmwares

Only GuC/HuC firmwares can be used by the VFs, don't claim support
for any other firmware (like GSC) even if the driver can support it.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604212231.1416-2-michal.wajdeczko@intel.com
13 months agoata: pata_macio: Fix max_segment_size with PAGE_SIZE == 64K
Michael Ellerman [Thu, 6 Jun 2024 11:14:45 +0000 (21:14 +1000)]
ata: pata_macio: Fix max_segment_size with PAGE_SIZE == 64K

The pata_macio driver advertises a max_segment_size of 0xff00, because
the hardware doesn't cope with requests >= 64K.

However the SCSI core requires max_segment_size to be at least
PAGE_SIZE, which is a problem for pata_macio when the kernel is built
with 64K pages.

In older kernels the SCSI core would just increase the segment size to
be equal to PAGE_SIZE, however since the commit tagged below it causes a
warning and the device fails to probe:

  WARNING: CPU: 0 PID: 26 at block/blk-settings.c:202 .blk_validate_limits+0x2f8/0x35c
  CPU: 0 PID: 26 Comm: kworker/u4:1 Not tainted 6.10.0-rc1 #1
  Hardware name: PowerMac7,2 PPC970 0x390202 PowerMac
  ...
  NIP .blk_validate_limits+0x2f8/0x35c
  LR  .blk_alloc_queue+0xc0/0x2f8
  Call Trace:
    .blk_alloc_queue+0xc0/0x2f8
    .blk_mq_alloc_queue+0x60/0xf8
    .scsi_alloc_sdev+0x208/0x3c0
    .scsi_probe_and_add_lun+0x314/0x52c
    .__scsi_add_device+0x170/0x1a4
    .ata_scsi_scan_host+0x2bc/0x3e4
    .async_port_probe+0x6c/0xa0
    .async_run_entry_fn+0x60/0x1bc
    .process_one_work+0x228/0x510
    .worker_thread+0x360/0x530
    .kthread+0x134/0x13c
    .start_kernel_thread+0x10/0x14
  ...
  scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured

Although the hardware can't cope with a 64K segment, the driver
already deals with that internally by splitting large requests in
pata_macio_qc_prep(). That is how the driver has managed to function
until now on 64K kernels.

So fix the driver to advertise a max_segment_size of 64K, which avoids
the warning and keeps the SCSI core happy.

Fixes: afd53a3d8528 ("scsi: core: Initialize scsi midlayer limits before allocating the queue")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/all/ce2bf6af-4382-4fe1-b392-cc6829f5ceb2@roeck-us.net/
Reported-by: Doru Iorgulescu <doru.iorgulescu1@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218858
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
13 months agonet: ethtool: fix the error condition in ethtool_get_phy_stats_ethtool()
Su Hui [Wed, 5 Jun 2024 03:47:43 +0000 (11:47 +0800)]
net: ethtool: fix the error condition in ethtool_get_phy_stats_ethtool()

Clang static checker (scan-build) warning:
net/ethtool/ioctl.c:line 2233, column 2
Called function pointer is null (null dereference).

Return '-EOPNOTSUPP' when 'ops->get_ethtool_phy_stats' is NULL to fix
this typo error.

Fixes: 201ed315f967 ("net/ethtool/ioctl: split ethtool_get_phy_stats into multiple helpers")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://lore.kernel.org/r/20240605034742.921751-1-suhui@nfschina.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
13 months agokconfig: remove wrong expr_trans_bool()
Masahiro Yamada [Mon, 3 Jun 2024 16:19:04 +0000 (01:19 +0900)]
kconfig: remove wrong expr_trans_bool()

expr_trans_bool() performs an incorrect transformation.

[Test Code]

    config MODULES
            def_bool y
            modules

    config A
            def_bool y
            select C if B != n

    config B
            def_tristate m

    config C
            tristate

[Result]

    CONFIG_MODULES=y
    CONFIG_A=y
    CONFIG_B=m
    CONFIG_C=m

This output is incorrect because CONFIG_C=y is expected.

Documentation/kbuild/kconfig-language.rst clearly explains the function
of the '!=' operator:

    If the values of both symbols are equal, it returns 'n',
    otherwise 'y'.

Therefore, the statement:

    select C if B != n

should be equivalent to:

    select C if y

Or, more simply:

    select C

Hence, the symbol C should be selected by the value of A, which is 'y'.

However, expr_trans_bool() wrongly transforms it to:

    select C if B

Therefore, the symbol C is selected by (A && B), which is 'm'.

The comment block of expr_trans_bool() correctly explains its intention:

  * bool FOO!=n => FOO
    ^^^^

If FOO is bool, FOO!=n can be simplified into FOO. This is correct.

However, the actual code performs this transformation when FOO is
tristate:

    if (e->left.sym->type == S_TRISTATE) {
                             ^^^^^^^^^^

While it can be fixed to S_BOOLEAN, there is no point in doing so
because expr_tranform() already transforms FOO!=n to FOO when FOO is
bool. (see the "case E_UNEQUAL" part)

expr_trans_bool() is wrong and unnecessary.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
13 months agoipv6: fix possible race in __fib6_drop_pcpu_from()
Eric Dumazet [Tue, 4 Jun 2024 19:35:49 +0000 (19:35 +0000)]
ipv6: fix possible race in __fib6_drop_pcpu_from()

syzbot found a race in __fib6_drop_pcpu_from() [1]

If compiler reads more than once (*ppcpu_rt),
second read could read NULL, if another cpu clears
the value in rt6_get_pcpu_route().

Add a READ_ONCE() to prevent this race.

Also add rcu_read_lock()/rcu_read_unlock() because
we rely on RCU protection while dereferencing pcpu_rt.

[1]

Oops: general protection fault, probably for non-canonical address 0xdffffc0000000012: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097]
CPU: 0 PID: 7543 Comm: kworker/u8:17 Not tainted 6.10.0-rc1-syzkaller-00013-g2bfcfd584ff5 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
Workqueue: netns cleanup_net
 RIP: 0010:__fib6_drop_pcpu_from.part.0+0x10a/0x370 net/ipv6/ip6_fib.c:984
Code: f8 48 c1 e8 03 80 3c 28 00 0f 85 16 02 00 00 4d 8b 3f 4d 85 ff 74 31 e8 74 a7 fa f7 49 8d bf 90 00 00 00 48 89 f8 48 c1 e8 03 <80> 3c 28 00 0f 85 1e 02 00 00 49 8b 87 90 00 00 00 48 8b 0c 24 48
RSP: 0018:ffffc900040df070 EFLAGS: 00010206
RAX: 0000000000000012 RBX: 0000000000000001 RCX: ffffffff89932e16
RDX: ffff888049dd1e00 RSI: ffffffff89932d7c RDI: 0000000000000091
RBP: dffffc0000000000 R08: 0000000000000005 R09: 0000000000000007
R10: 0000000000000001 R11: 0000000000000006 R12: ffff88807fa080b8
R13: fffffbfff1a9a07d R14: ffffed100ff41022 R15: 0000000000000001
FS:  0000000000000000(0000) GS:ffff8880b9200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b32c26000 CR3: 000000005d56e000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
  __fib6_drop_pcpu_from net/ipv6/ip6_fib.c:966 [inline]
  fib6_drop_pcpu_from net/ipv6/ip6_fib.c:1027 [inline]
  fib6_purge_rt+0x7f2/0x9f0 net/ipv6/ip6_fib.c:1038
  fib6_del_route net/ipv6/ip6_fib.c:1998 [inline]
  fib6_del+0xa70/0x17b0 net/ipv6/ip6_fib.c:2043
  fib6_clean_node+0x426/0x5b0 net/ipv6/ip6_fib.c:2205
  fib6_walk_continue+0x44f/0x8d0 net/ipv6/ip6_fib.c:2127
  fib6_walk+0x182/0x370 net/ipv6/ip6_fib.c:2175
  fib6_clean_tree+0xd7/0x120 net/ipv6/ip6_fib.c:2255
  __fib6_clean_all+0x100/0x2d0 net/ipv6/ip6_fib.c:2271
  rt6_sync_down_dev net/ipv6/route.c:4906 [inline]
  rt6_disable_ip+0x7ed/0xa00 net/ipv6/route.c:4911
  addrconf_ifdown.isra.0+0x117/0x1b40 net/ipv6/addrconf.c:3855
  addrconf_notify+0x223/0x19e0 net/ipv6/addrconf.c:3778
  notifier_call_chain+0xb9/0x410 kernel/notifier.c:93
  call_netdevice_notifiers_info+0xbe/0x140 net/core/dev.c:1992
  call_netdevice_notifiers_extack net/core/dev.c:2030 [inline]
  call_netdevice_notifiers net/core/dev.c:2044 [inline]
  dev_close_many+0x333/0x6a0 net/core/dev.c:1585
  unregister_netdevice_many_notify+0x46d/0x19f0 net/core/dev.c:11193
  unregister_netdevice_many net/core/dev.c:11276 [inline]
  default_device_exit_batch+0x85b/0xae0 net/core/dev.c:11759
  ops_exit_list+0x128/0x180 net/core/net_namespace.c:178
  cleanup_net+0x5b7/0xbf0 net/core/net_namespace.c:640
  process_one_work+0x9fb/0x1b60 kernel/workqueue.c:3231
  process_scheduled_works kernel/workqueue.c:3312 [inline]
  worker_thread+0x6c8/0xf70 kernel/workqueue.c:3393
  kthread+0x2c1/0x3a0 kernel/kthread.c:389
  ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
  ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244

Fixes: d52d3997f843 ("ipv6: Create percpu rt6_info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20240604193549.981839-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
13 months agokconfig: doc: document behavior of 'select' and 'imply' followed by 'if'
Masahiro Yamada [Mon, 3 Jun 2024 16:19:03 +0000 (01:19 +0900)]
kconfig: doc: document behavior of 'select' and 'imply' followed by 'if'

Documentation/kbuild/kconfig-language.rst explains the behavior of
'select' as follows:

  reverse dependencies can be used to force a lower limit of
  another symbol. The value of the current menu symbol is used as the
  minimal value <symbol> can be set to.

This is not true when the 'select' property is followed by 'if'.

[Test Code]

    config MODULES
            def_bool y
            modules

    config A
            def_tristate y
            select C if B

    config B
            def_tristate m

    config C
            tristate

[Result]

    CONFIG_MODULES=y
    CONFIG_A=y
    CONFIG_B=m
    CONFIG_C=m

If "the value of A is used as the minimal value C can be set to",
C must be 'y'.

The actual behavior is "C is selected by (A && B)". The lower limit of
C is downgraded due to B being 'm'.

This behavior is kind of weird, and this has arisen several times in
the mailing list.

I do not know whether it is a bug or intended behavior. Anyway, it is
not feasible to change it now because many Kconfig files are written
based on this behavior. The same applies to 'imply'.

Document this (but reserve the possibility for a future change).

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
13 months agokconfig: doc: fix a typo in the note about 'imply'
Masahiro Yamada [Mon, 3 Jun 2024 16:19:02 +0000 (01:19 +0900)]
kconfig: doc: fix a typo in the note about 'imply'

This sentence does not make sense due to a typo. Fix it.

Fixes: def2fbffe62c ("kconfig: allow symbols implied by y to become m")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>