Merge tag 'net-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
There is a recently notified BT regression with no fix yet. I do not
think a fix will land in the next week.
Current release - regressions:
- core: tighten bad gso csum offset check in virtio_net_hdr
- netfilter: move nf flowtable bpf initialization in
nf_flow_table_module_init()
- eth: ice: stop calling pci_disable_device() as we use pcim
- eth: fou: fix null-ptr-deref in GRO.
Current release - new code bugs:
- hsr: prevent NULL pointer dereference in hsr_proxy_announce()
Previous releases - regressions:
- hsr: remove seqnr_lock
- netfilter: nft_socket: fix sk refcount leaks
- mptcp: pm: fix uaf in __timer_delete_sync
- phy: dp83822: fix NULL pointer dereference on DP83825 devices
- eth: revert "virtio_net: rx enable premapped mode by default"
- eth: octeontx2-af: Modify SMQ flush sequence to drop packets
Previous releases - always broken:
- eth: mlx5: fix bridge mode operations when there are no VFs
- eth: igb: Always call igb_xdp_ring_update_tail() under Tx lock"
* tag 'net-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
net: netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init()
net: tighten bad gso csum offset check in virtio_net_hdr
netlink: specs: mptcp: fix port endianness
net: dpaa: Pad packets to ETH_ZLEN
mptcp: pm: Fix uaf in __timer_delete_sync
net: libwx: fix number of Rx and Tx descriptors
net: dsa: felix: ignore pending status of TAS module when it's disabled
net: hsr: prevent NULL pointer dereference in hsr_proxy_announce()
selftests: mptcp: include net_helper.sh file
selftests: mptcp: include lib.sh file
selftests: mptcp: join: restrict fullmesh endp on 1st sf
netfilter: nft_socket: make cgroupsv2 matching work with namespaces
netfilter: nft_socket: fix sk refcount leaks
MAINTAINERS: Add ethtool pse-pd to PSE NETWORK DRIVER
dt-bindings: net: tja11xx: fix the broken binding
selftests: net: csum: Fix checksums for packets with non-zero padding
net: phy: dp83822: Fix NULL pointer dereference on DP83825 devices
virtio_net: disable premapped mode by default
Revert "virtio_net: big mode skip the unmap check"
Revert "virtio_net: rx remove premapped failover code"
...
Merge tag 'platform-drivers-x86-v6.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- asus-wmi: Disable OOBE that interferes with backlight control
- panasonic-laptop: Two fixes to SINF array handling
* tag 'platform-drivers-x86-v6.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-wmi: Disable OOBE experience on Zenbook S 16
platform/x86: panasonic-laptop: Allocate 1 entry extra in the sinf array
platform/x86: panasonic-laptop: Fix SINF array out of bounds accesses
mm: avoid leaving partial pfn mappings around in error case
As Jann points out, PFN mappings are special, because unlike normal
memory mappings, there is no lifetime information associated with the
mapping - it is just a raw mapping of PFNs with no reference counting of
a 'struct page'.
That's all very much intentional, but it does mean that it's easy to
mess up the cleanup in case of errors. Yes, a failed mmap() will always
eventually clean up any partial mappings, but without any explicit
lifetime in the page table mapping itself, it's very easy to do the
error handling in the wrong order.
In particular, it's easy to mistakenly free the physical backing store
before the page tables are actually cleaned up and (temporarily) have
stale dangling PTE entries.
To make this situation less error-prone, just make sure that any partial
pfn mapping is torn down early, before any other error handling.
Reported-and-tested-by: Jann Horn <jannh@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Simona Vetter <simona.vetter@ffwll.ch> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lorenzo Bianconi [Wed, 11 Sep 2024 15:37:30 +0000 (17:37 +0200)]
net: netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init()
Move nf flowtable bpf initialization in nf_flow_table module load
routine since nf_flow_table_bpf is part of nf_flow_table module and not
nf_flow_table_inet one. This patch allows to avoid the following kernel
warning running the reproducer below:
$modprobe nf_flow_table_inet
$rmmod nf_flow_table_inet
$modprobe nf_flow_table_inet
modprobe: ERROR: could not insert 'nf_flow_table_inet': Invalid argument
Paolo Abeni [Thu, 12 Sep 2024 13:26:18 +0000 (15:26 +0200)]
Merge tag 'nf-24-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains two fixes from Florian Westphal:
Patch #1 fixes a sk refcount leak in nft_socket on mismatch.
Patch #2 fixes cgroupsv2 matching from containers due to incorrect
level in subtree.
netfilter pull request 24-09-12
* tag 'nf-24-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_socket: make cgroupsv2 matching work with namespaces
netfilter: nft_socket: fix sk refcount leaks
====================
Willem de Bruijn [Tue, 10 Sep 2024 21:35:35 +0000 (17:35 -0400)]
net: tighten bad gso csum offset check in virtio_net_hdr
The referenced commit drops bad input, but has false positives.
Tighten the check to avoid these.
The check detects illegal checksum offload requests, which produce
csum_start/csum_off beyond end of packet after segmentation.
But it is based on two incorrect assumptions:
1. virtio_net_hdr_to_skb with VIRTIO_NET_HDR_GSO_TCP[46] implies GSO.
True in callers that inject into the tx path, such as tap.
But false in callers that inject into rx, like virtio-net.
Here, the flags indicate GRO, and CHECKSUM_UNNECESSARY or
CHECKSUM_NONE without VIRTIO_NET_HDR_F_NEEDS_CSUM is normal.
2. TSO requires checksum offload, i.e., ip_summed == CHECKSUM_PARTIAL.
False, as tcp[46]_gso_segment will fix up csum_start and offset for
all other ip_summed by calling __tcp_v4_send_check.
Because of 2, we can limit the scope of the fix to virtio_net_hdr
that do try to set these fields, with a bogus value.
Sean Anderson [Tue, 10 Sep 2024 14:31:44 +0000 (10:31 -0400)]
net: dpaa: Pad packets to ETH_ZLEN
When sending packets under 60 bytes, up to three bytes of the buffer
following the data may be leaked. Avoid this by extending all packets to
ETH_ZLEN, ensuring nothing is leaked in the padding. This bug can be
reproduced by running
$ ping -s 11 destination
Fixes: 9ad1a3749333 ("dpaa_eth: add support for DPAA Ethernet") Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240910143144.1439910-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In remove_anno_list_by_saddr(running on CPU2), after leaving the critical
zone protected by "pm.lock", the entry will be released, which leads to the
occurrence of uaf in the mptcp_pm_del_add_timer(running on CPU1).
Keeping a reference to add_timer inside the lock, and calling
sk_stop_timer_sync() with this reference, instead of "entry->add_timer".
Move list_del(&entry->list) to mptcp_pm_del_add_timer and inside the pm lock,
do not directly access any members of the entry outside the pm lock, which
can avoid similar "entry->x" uaf.
Fixes: 00cfd77b9063 ("mptcp: retransmit ADD_ADDR when timeout") Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+f3a31fb909db9b2a5c4d@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=f3a31fb909db9b2a5c4d Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Edward Adam Davis <eadavis@qq.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://patch.msgid.link/tencent_7142963A37944B4A74EF76CD66EA3C253609@qq.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The number of transmit and receive descriptors must be a multiple of 128
due to the hardware limitation. If it is set to a multiple of 8 instead of
a multiple 128, the queues will easily be hung.
Cc: stable@vger.kernel.org Fixes: 883b5984a5d2 ("net: wangxun: add ethtool_ops for ring parameters") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240910095629.570674-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xiaoliang Yang [Fri, 6 Sep 2024 09:35:50 +0000 (17:35 +0800)]
net: dsa: felix: ignore pending status of TAS module when it's disabled
The TAS module could not be configured when it's running in pending
status. We need disable the module and configure it again. However, the
pending status is not cleared after the module disabled. TC taprio set
will always return busy even it's disabled.
For example, a user uses tc-taprio to configure Qbv and a future
basetime. The TAS module will run in a pending status. There is no way
to reconfigure Qbv, it always returns busy.
Actually the TAS module can be reconfigured when it's disabled. So it
doesn't need to check the pending status if the TAS module is disabled.
After the patch, user can delete the tc taprio configuration to disable
Qbv and reconfigure it again.
Jeongjun Park [Sat, 7 Sep 2024 19:03:41 +0000 (04:03 +0900)]
net: hsr: prevent NULL pointer dereference in hsr_proxy_announce()
In the function hsr_proxy_annouance() added in the previous commit 5f703ce5c981 ("net: hsr: Send supervisory frames to HSR network
with ProxyNodeTable data"), the return value of the hsr_port_get_hsr()
function is not checked to be a NULL pointer, which causes a NULL
pointer dereference.
To solve this, we need to add code to check whether the return value
of hsr_port_get_hsr() is NULL.
Reported-by: syzbot+02a42d9b1bd395cbcab4@syzkaller.appspotmail.com Fixes: 5f703ce5c981 ("net: hsr: Send supervisory frames to HSR network with ProxyNodeTable data") Signed-off-by: Jeongjun Park <aha310510@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Lukasz Majewski <lukma@denx.de> Link: https://patch.msgid.link/20240907190341.162289-1-aha310510@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 11 Sep 2024 22:18:23 +0000 (15:18 -0700)]
Merge branch 'selftests-mptcp-misc-small-fixes'
Matthieu Baerts says:
====================
selftests: mptcp: misc. small fixes
Here are some various fixes for the MPTCP selftests.
Patch 1 fixes a recently modified test to continue to work as expected
on older kernels. This is a fix for a recent fix that can be backported
up to v5.15.
Patch 2 and 3 include dependences when exporting or installing the
tests. Two fixes for v6.11-rc1.
====================
Similar to the previous commit, the net_helper.sh file from the parent
directory is used by the MPTCP selftests and it needs to be present when
running the tests.
This file then needs to be listed in the Makefile to be included when
exporting or installing the tests, e.g. with:
make -C tools/testing/selftests \
TARGETS=net/mptcp \
install INSTALL_PATH=$KSFT_INSTALL_PATH
cd $KSFT_INSTALL_PATH
./run_kselftest.sh -c net/mptcp
selftests: mptcp: join: restrict fullmesh endp on 1st sf
A new endpoint using the IP of the initial subflow has been recently
added to increase the code coverage. But it breaks the test when using
old kernels not having commit 86e39e04482b ("mptcp: keep track of local
endpoint still available for each msk"), e.g. on v5.15.
Similar to commit d4c81bbb8600 ("selftests: mptcp: join: support local
endpoint being tracked or not"), it is possible to add the new endpoint
conditionally, by checking if "mptcp_pm_subflow_check_next" is present
in kallsyms: this is not directly linked to the commit introducing this
symbol but for the parent one which is linked anyway. So we can know in
advance what will be the expected behaviour, and add the new endpoint
only when it makes sense to do so.
to match traffic from a process that got added to "foo" via
"echo $pid > /sys/fs/cgroup/foo/cgroup.procs".
However, 'level 3' is needed to make this work.
Seen from initial namespace, the complete hierarchy is:
% stat /sys/fs/cgroup/system.slice/docker-.../foo
Device: 0,21 Inode: 2264 ..
i.e. hierarchy is
0 1 2 3
/ -> system.slice -> docker-1... -> foo
... but the container doesn't know that its "/" is the "docker-1.."
cgroup. Current code will retrieve the 'system.slice' cgroup node
and store its kn->id in the destination register, so compare with
2264 ("foo" cgroup id) will not match.
Fetch "/" cgroup from ->init() and add its level to the level we try to
extract. cgroup root-level is 0 for the init-namespace or the level
of the ancestor that is exposed as the cgroup root inside the container.
In the above case, cgrp->level of "/" resolved in the container is 2
(docker-1...scope/) and request for 'level 1' will get adjusted
to fetch the actual level (3).
v2: use CONFIG_SOCK_CGROUP_DATA, eval function depends on it.
(kernel test robot)
Cc: cgroups@vger.kernel.org Fixes: e0bb96db96f8 ("netfilter: nft_socket: add support for cgroupsv2") Reported-by: Nadia Pinaeva <n.m.pinaeva@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Merge tag 'arm-fixes-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The bulk of the changes this time are for device tree files in the
rockchips platform, addressing correctness issues on individual
boards, plus one change in the rk356x SoC file to make it match the
binding.
The only other changes that came in are
- a CPU frequencey scaling fix for JH7110 (RISC-V)
- a build fix for the cznic hwrandom driver
- a fix for a deadlock in qualcomm uefi secure application firmware
driver"
* tag 'arm-fixes-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
platform: cznic: turris-omnia-mcu: fix HW_RANDOM dependency
riscv: dts: starfive: jh7110-common: Fix lower rate of CPUfreq by setting PLL0 rate to 1.5GHz
firmware: qcom: uefisecapp: Fix deadlock in qcuefi_acquire()
arm64: dts: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
dt-bindings: soc: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
arm64: dts: rockchip: override BIOS_DISABLE signal via GPIO hog on RK3399 Puma
arm64: dts: rockchip: fix eMMC/SPI corruption when audio has been used on RK3399 Puma
arm64: dts: rockchip: fix PMIC interrupt pin in pinctrl for ROCK Pi E
arm64: dts: rockchip: Remove broken tsadc pinctrl binding for rk356x
Merge tag 'for-6.11/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fix from Mikulas Patocka:
- fix a race condition in dm-integrity
* tag 'for-6.11/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-integrity: fix a race condition when accessing recalc_sector
Merge tag 'printk-for-6.11-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fix from Petr Mladek:
- Fix build of serial_core as a module
* tag 'printk-for-6.11-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Export match_devname_and_update_preferred_console()
Lorenzo Stoakes [Wed, 11 Sep 2024 17:51:11 +0000 (18:51 +0100)]
minmax: reduce min/max macro expansion in atomisp driver
Avoid unnecessary nested min()/max() which results in egregious macro
expansion.
Use clamp_t() as this introduces the least possible expansion, and turn
the {s,u}DIGIT_FITTING() macros into inline functions to avoid the
nested expansion.
This resolves an issue with slackware 15.0 32-bit compilation as
reported by Richard Narron.
Presumably the min/max fixups would be difficult to backport, this patch
should be easier and fix's Richard's problem in 5.15.
Reported-by: Richard Narron <richard@aaazen.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Closes: https://lore.kernel.org/all/4a5321bd-b1f-1832-f0c-cea8694dc5aa@aaazen.com/ Fixes: 867046cc7027 ("minmax: relax check to allow comparison between unsigned arguments and signed constants") Cc: stable@vger.kernel.org Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'riscv-soc-fixes-for-v6.11-final' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V soc fixes for v6.11-final
StarFive:
A fix to return one of the clocks on the JH7110 from 1 GHz to 1.5 GHz
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-fixes-for-v6.11-final' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: starfive: jh7110-common: Fix lower rate of CPUfreq by setting PLL0 rate to 1.5GHz
There is still a build failure when the rwrng support is in a loadable
module but the mcu driver is built-in:
arm-linux-gnueabi-ld: drivers/platform/cznic/turris-omnia-mcu-trng.o: in function `omnia_mcu_register_trng':
turris-omnia-mcu-trng.c:(.text.omnia_mcu_register_trng+0x11c): undefined reference to `devm_hwrng_register'
Change the dependency to explicitly disallow the broken
configuration.
Jakub Kicinski [Wed, 11 Sep 2024 03:15:10 +0000 (20:15 -0700)]
Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-09-09 (ice, igb)
This series contains updates to ice and igb drivers.
Martyna moves LLDP rule removal to the proper uninitialization function
for ice.
Jake corrects accounting logic for FWD_TO_VSI_LIST switch filters on
ice.
Przemek removes incorrect, explicit calls to pci_disable_device() for
ice.
Michal Schmidt stops incorrect use of VSI list for VLAN use on ice.
Sriram Yagnaraman adjusts igb_xdp_ring_update_tail() to be called under
Tx lock on igb.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igb: Always call igb_xdp_ring_update_tail() under Tx lock
ice: fix VSI lists confusion when adding VLANs
ice: stop calling pci_disable_device() as we use pcim
ice: fix accounting for filters shared by multiple VSIs
ice: Fix lldp packets dropping after changing the number of channels
====================
Jakub Kicinski [Wed, 11 Sep 2024 03:11:40 +0000 (20:11 -0700)]
Merge tag 'mlx5-fixes-2024-09-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2024-09-09
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2024-09-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Fix bridge mode operations when there are no VFs
net/mlx5: Verify support for scheduling element and TSAR type
net/mlx5: Add missing masks and QoS bit masks for scheduling elements
net/mlx5: Explicitly set scheduling element and TSAR type
net/mlx5e: Add missing link mode to ptys2ext_ethtool_map
net/mlx5e: Add missing link modes to ptys2ethtool_map
net/mlx5: Update the list of the PCI supported devices
====================
As Rob pointed in another mail thread [1], the binding of tja11xx PHY
is completely broken, the schema cannot catch the error in the DTS. A
compatiable string must be needed if we want to add a custom propety.
So extract known PHY IDs from the tja11xx PHY drivers and convert them
into supported compatible string list to fix the broken binding issue.
Sean Anderson [Fri, 6 Sep 2024 21:07:43 +0000 (17:07 -0400)]
selftests: net: csum: Fix checksums for packets with non-zero padding
Padding is not included in UDP and TCP checksums. Therefore, reduce the
length of the checksummed data to include only the data in the IP
payload. This fixes spurious reported checksum failures like
rx: pkt: sport=33000 len=26 csum=0xc850 verify=0xf9fe
pkt: bad csum
Technically it is possible for there to be trailing bytes after the UDP
data but before the Ethernet padding (e.g. if sizeof(ip) + sizeof(udp) +
udp.len < ip.len). However, we don't generate such packets.
Fixes: 91a7de85600d ("selftests/net: add csum offload test") Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240906210743.627413-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tomas Paukrt [Fri, 6 Sep 2024 10:52:40 +0000 (12:52 +0200)]
net: phy: dp83822: Fix NULL pointer dereference on DP83825 devices
The probe() function is only used for DP83822 and DP83826 PHY,
leaving the private data pointer uninitialized for the DP83825 models
which causes a NULL pointer dereference in the recently introduced/changed
functions dp8382x_config_init() and dp83822_set_wol().
Add the dp8382x_probe() function, so all PHY models will have a valid
private data pointer to fix this issue and also prevent similar issues
in the future.
Fixes: 9ef9ecfa9e9f ("net: phy: dp8382x: keep WOL settings across suspends") Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/66w.ZbGt.65Ljx42yHo5.1csjxu@seznam.cz Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge tag 'trace-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Move declaration of interface_lock outside of CONFIG_TIMERLAT_TRACER
The fix to some locking races moved the declaration of the
interface_lock up in the file, but also moved it into the
CONFIG_TIMERLAT_TRACER #ifdef block, breaking the build when that
wasn't set. Move it further up and out of that #ifdef block.
- Remove unused function run_tracer_selftest() stub
When CONFIG_FTRACE_STARTUP_TEST is not set the stub function
run_tracer_selftest() is not used and clang is warning about it.
Remove the function stub as it is not needed.
* tag 'trace-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Drop unused helper function to fix the build
tracing/osnoise: Fix build when timerlat is not enabled
Bas Nieuwenhuizen [Mon, 9 Sep 2024 22:35:03 +0000 (00:35 +0200)]
platform/x86: asus-wmi: Disable OOBE experience on Zenbook S 16
The OOBE experience fades the keyboard backlight in & out continuously,
and make the backlight uncontrollable using its device.
Workaround taken from
https://wiki.archlinux.org/index.php?title=ASUS_Zenbook_UM5606&diff=next&oldid=815547
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Reviewed-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20240909223503.1445779-1-bas@basnieuwenhuizen.nl Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
net: ftgmac100: Enable TX interrupt to avoid TX timeout
Currently, the driver only enables RX interrupt to handle RX
packets and TX resources. Sometimes there is not RX traffic,
so the TX resource needs to wait for RX interrupt to free.
This situation will toggle the TX timeout watchdog when the MAC
TX ring has no more resources to transmit packets.
Therefore, enable TX interrupt to release TX resources at any time.
When I am verifying iperf3 over UDP, the network hangs.
Like the log below.
The network topology is FTGMAC connects directly to a PC.
UDP does not need to wait for ACK, unlike TCP.
Therefore, FTGMAC needs to enable TX interrupt to release TX resources instead
of waiting for the RX interrupt.
octeontx2-af: Modify SMQ flush sequence to drop packets
The current implementation of SMQ flush sequence waits for the packets
in the TM pipeline to be transmitted out of the link. This sequence
doesn't succeed in HW when there is any issue with link such as lack of
link credits, link down or any other traffic that is fully occupying the
link bandwidth (QoS). This patch modifies the SMQ flush sequence to
drop the packets after TL1 level (SQM) instead of polling for the packets
to be sent out of RPM/CGX link.
Steven Rostedt [Mon, 9 Sep 2024 14:32:31 +0000 (10:32 -0400)]
tracing/osnoise: Fix build when timerlat is not enabled
To fix some critical section races, the interface_lock was added to a few
locations. One of those locations was above where the interface_lock was
declared, so the declaration was moved up before that usage.
Unfortunately, where it was placed was inside a CONFIG_TIMERLAT_TRACER
ifdef block. As the interface_lock is used outside that config, this broke
the build when CONFIG_OSNOISE_TRACER was enabled but
CONFIG_TIMERLAT_TRACER was not.
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: "Helena Anna" <helena.anna.dubel@intel.com> Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com> Cc: Tomas Glozar <tglozar@redhat.com> Link: https://lore.kernel.org/20240909103231.23a289e2@gandalf.local.home Fixes: e6a53481da29 ("tracing/timerlat: Only clear timer if a kthread exists") Reported-by: "Bityutskiy, Artem" <artem.bityutskiy@intel.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The bridge mode is only relevant when there are multiple functions per
port. Therefore, prevent setting and getting this setting when there are no
VFs.
Note that after this change, there are no settings to change on the PF
interface using `bridge link` when there are no VFs, so the interface no
longer appears in the `bridge link` output.
Fixes: 4b89251de024 ("net/mlx5: Support ndo bridge_setlink and getlink") Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Carolina Jubran [Mon, 5 Aug 2024 10:13:03 +0000 (13:13 +0300)]
net/mlx5: Verify support for scheduling element and TSAR type
Before creating a scheduling element in a NIC or E-Switch scheduler,
ensure that the requested element type is supported. If the element is
of type Transmit Scheduling Arbiter (TSAR), also verify that the
specific TSAR type is supported.
Fixes: 214baf22870c ("net/mlx5e: Support HTB offload") Fixes: 85c5f7c9200e ("net/mlx5: E-switch, Create QoS on demand") Fixes: 0fe132eac38c ("net/mlx5: E-switch, Allow to add vports to rate groups") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Shahar Shitrit [Sun, 11 Aug 2024 10:58:04 +0000 (13:58 +0300)]
net/mlx5e: Add missing link mode to ptys2ext_ethtool_map
Add MLX5E_400GAUI_8_400GBASE_CR8 to the extended modes
in ptys2ext_ethtool_table, since it was missing.
Fixes: 6a897372417e ("net/mlx5: ethtool, Add ethtool support for 50Gbps per lane link modes") Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Sriram Yagnaraman [Thu, 22 Aug 2024 07:42:07 +0000 (09:42 +0200)]
igb: Always call igb_xdp_ring_update_tail() under Tx lock
Always call igb_xdp_ring_update_tail() under __netif_tx_lock, add a comment
and lockdep assert to indicate that. This is needed to share the same TX
ring between XDP, XSK and slow paths. Furthermore, the current XDP
implementation is racy on tail updates.
Fixes: 9cbc948b5a20 ("igb: add XDP support") Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
[Kurt: Add lockdep assert and fixes tag] Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Michal Schmidt [Wed, 4 Sep 2024 09:39:22 +0000 (11:39 +0200)]
ice: fix VSI lists confusion when adding VLANs
The description of function ice_find_vsi_list_entry says:
Search VSI list map with VSI count 1
However, since the blamed commit (see Fixes below), the function no
longer checks vsi_count. This causes a problem in ice_add_vlan_internal,
where the decision to share VSI lists between filter rules relies on the
vsi_count of the found existing VSI list being 1.
The reproducing steps:
1. Have a PF and two VFs.
There will be a filter rule for VLAN 0, referring to a VSI list
containing VSIs: 0 (PF), 2 (VF#0), 3 (VF#1).
2. Add VLAN 1234 to VF#0.
ice will make the wrong decision to share the VSI list with the new
rule. The wrong behavior may not be immediately apparent, but it can
be observed with debug prints.
3. Add VLAN 1234 to VF#1.
ice will unshare the VSI list for the VLAN 1234 rule. Due to the
earlier bad decision, the newly created VSI list will contain
VSIs 0 (PF) and 3 (VF#1), instead of expected 2 (VF#0) and 3 (VF#1).
4. Try pinging a network peer over the VLAN interface on VF#0.
This fails.
Reproducer script at:
https://gitlab.com/mschmidt2/repro/-/blob/master/RHEL-46814/test-vlan-vsi-list-confusion.sh
Commented debug trace:
https://gitlab.com/mschmidt2/repro/-/blob/master/RHEL-46814/ice-vlan-vsi-lists-debug.txt
Patch adding the debug prints:
https://gitlab.com/mschmidt2/linux/-/commit/f8a8814623944a45091a77c6094c40bfe726bfdb
(Unsafe, by the way. Lacks rule_lock when dumping in ice_remove_vlan.)
Michal Swiatkowski added to the explanation that the bug is caused by
reusing a VSI list created for VLAN 0. All created VFs' VSIs are added
to VLAN 0 filter. When a non-zero VLAN is created on a VF which is already
in VLAN 0 (normal case), the VSI list from VLAN 0 is reused.
It leads to a problem because all VFs (VSIs to be specific) that are
subscribed to VLAN 0 will now receive a new VLAN tag traffic. This is
one bug, another is the bug described above. Removing filters from
one VF will remove VLAN filter from the previous VF. It happens a VF is
reset. Example:
- creation of 3 VFs
- we have VSI list (used for VLAN 0) [0 (pf), 2 (vf1), 3 (vf2), 4 (vf3)]
- we are adding VLAN 100 on VF1, we are reusing the previous list
because 2 is there
- VLAN traffic works fine, but VLAN 100 tagged traffic can be received
on all VSIs from the list (for example broadcast or unicast)
- trust is turning on VF2, VF2 is resetting, all filters from VF2 are
removed; the VLAN 100 filter is also removed because 3 is on the list
- VLAN traffic to VF1 isn't working anymore, there is a need to recreate
VLAN interface to readd VLAN filter
One thing I'm not certain about is the implications for the LAG feature,
which is another caller of ice_find_vsi_list_entry. I don't have a
LAG-capable card at hand to test.
Fixes: 23ccae5ce15f ("ice: changes to the interface with the HW and FW for SRIOV_VF+LAG") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Dave Ertman <David.m.ertman@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Przemek Kitszel [Fri, 30 Aug 2024 13:44:11 +0000 (15:44 +0200)]
ice: stop calling pci_disable_device() as we use pcim
Our driver uses devres to manage resources, in particular we call
pcim_enable_device(), what also means we express the intent to get
automatic pci_disable_device() call at driver removal. Manual calls to
pci_disable_device() misuse the API.
Recent commit (see "Fixes" tag) has changed the removal action from
conditional (silent ignore of double call to pci_disable_device()) to
unconditional, but able to catch unwanted redundant calls; see cited
"Fixes" commit for details.
Since that, unloading the driver yields following warn+splat:
Jacob Keller [Wed, 31 Jul 2024 16:55:55 +0000 (09:55 -0700)]
ice: fix accounting for filters shared by multiple VSIs
When adding a switch filter (such as a MAC or VLAN filter), it is expected
that the driver will detect the case where the filter already exists, and
return -EEXIST. This is used by calling code such as ice_vc_add_mac_addr,
and ice_vsi_add_vlan to avoid incrementing the accounting fields such as
vsi->num_vlan or vf->num_mac.
This logic works correctly for the case where only a single VSI has added a
given switch filter.
When a second VSI adds the same switch filter, the driver converts the
existing filter from an ICE_FWD_TO_VSI filter into an ICE_FWD_TO_VSI_LIST
filter. This saves switch resources, by ensuring that multiple VSIs can
re-use the same filter.
The ice_add_update_vsi_list() function is responsible for doing this
conversion. When first converting a filter from the FWD_TO_VSI into
FWD_TO_VSI_LIST, it checks if the VSI being added is the same as the
existing rule's VSI. In such a case it returns -EEXIST.
However, when the switch rule has already been converted to a
FWD_TO_VSI_LIST, the logic is different. Adding a new VSI in this case just
requires extending the VSI list entry. The logic for checking if the rule
already exists in this case returns 0 instead of -EEXIST.
This breaks the accounting logic mentioned above, so the counters for how
many MAC and VLAN filters exist for a given VF or VSI no longer accurately
reflect the actual count. This breaks other code which relies on these
counts.
In typical usage this primarily affects such filters generally shared by
multiple VSIs such as VLAN 0, or broadcast and multicast MAC addresses.
Fix this by correctly reporting -EEXIST in the case of adding the same VSI
to a switch rule already converted to ICE_FWD_TO_VSI_LIST.
Fixes: 9daf8208dd4d ("ice: Add support for switch filter programming") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Martyna Szapar-Mudlaw [Wed, 26 Jun 2024 09:43:42 +0000 (11:43 +0200)]
ice: Fix lldp packets dropping after changing the number of channels
After vsi setup refactor commit 6624e780a577 ("ice: split ice_vsi_setup
into smaller functions") ice_cfg_sw_lldp function which removes rx rule
directing LLDP packets to vsi is moved from ice_vsi_release to
ice_vsi_decfg function. ice_vsi_decfg is used in more cases than just in
vsi_release resulting in unnecessary removal of rx lldp packets handling
switch rule. This leads to lldp packets being dropped after a change number
of channels via ethtool.
This patch moves ice_cfg_sw_lldp function that removes rx lldp sw rule back
to ice_vsi_release function.
Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") Reported-by: Matěj Grégr <mgregr@netx.as> Closes: https://lore.kernel.org/intel-wired-lan/1be45a76-90af-4813-824f-8398b69745a9@netx.as/T/#u Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Hans de Goede [Mon, 9 Sep 2024 11:32:25 +0000 (13:32 +0200)]
platform/x86: panasonic-laptop: Fix SINF array out of bounds accesses
The panasonic laptop code in various places uses the SINF array with index
values of 0 - SINF_CUR_BRIGHT(0x0d) without checking that the SINF array
is big enough.
Not all panasonic laptops have this many SINF array entries, for example
the Toughbook CF-18 model only has 10 SINF array entries. So it only
supports the AC+DC brightness entries and mute.
Check that the SINF array has a minimum size which covers all AC+DC
brightness entries and refuse to load if the SINF array is smaller.
For higher SINF indexes hide the sysfs attributes when the SINF array
does not contain an entry for that attribute, avoiding show()/store()
accessing the array out of bounds and add bounds checking to the probe()
and resume() code accessing these.
Fixes: e424fb8cc4e6 ("panasonic-laptop: avoid overflow in acpi_pcc_hotkey_add()") Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240909113227.254470-1-hdegoede@redhat.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Merge tag 'bcachefs-2024-09-09' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
- fix ca->io_ref usage; analagous to previous patch doing that for main
discard path
- cond_resched() in __journal_keys_sort(), cutting down on "hung task"
warnings when journal is big
- rest of basic BCH_SB_MEMBER_INVALID support
- and the critical one: don't delete open files in online fsck, this
was causing the "dirent points to inode that doesn't point back"
inconsistencies some users were seeing
* tag 'bcachefs-2024-09-09' of git://evilpiepirate.org/bcachefs:
bcachefs: Don't delete open files in online fsck
bcachefs: fix btree_key_cache sysfs knob
bcachefs: More BCH_SB_MEMBER_INVALID support
bcachefs: Simplify bch2_bkey_drop_ptrs()
bcachefs: Add a cond_resched() to __journal_keys_sort()
bcachefs: Fix ca->io_ref usage
* tag 'hyperv-fixes-signed-20240908' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hv: vmbus: Constify struct kobj_type and struct attribute_group
tools: hv: rm .*.cmd when make clean
x86/hyperv: fix kexec crash due to VP assist page corruption
Drivers: hv: vmbus: Fix the misplaced function description
tools: hv: lsvmbus: change shebang to use python3
x86/hyperv: Set X86_FEATURE_TSC_KNOWN_FREQ when Hyper-V provides frequency
Documentation: hyperv: Add overview of Confidential Computing VM support
clocksource: hyper-v: Use lapic timer in a TDX VM without paravisor
Drivers: hv: Remove deprecated hv_fcopy declarations
Kent Overstreet [Wed, 4 Sep 2024 21:49:20 +0000 (17:49 -0400)]
bcachefs: Simplify bch2_bkey_drop_ptrs()
bch2_bkey_drop_ptrs() had a some complicated machinery for avoiding
O(n^2) when dropping multiple pointers - but when n is only going to be
~4, it's not worth it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Eric Dumazet [Wed, 4 Sep 2024 13:37:25 +0000 (13:37 +0000)]
net: hsr: remove seqnr_lock
syzbot found a new splat [1].
Instead of adding yet another spin_lock_bh(&hsr->seqnr_lock) /
spin_unlock_bh(&hsr->seqnr_lock) pair, remove seqnr_lock
and use atomic_t for hsr->sequence_nr and hsr->sup_sequence_nr.
This also avoid a race in hsr_fill_info().
Also remove interlink_sequence_nr which is unused.
Fixes: 06afd2c31d33 ("hsr: Synchronize sending frames to have always incremented outgoing seq nr.") Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Xingyu Wu [Mon, 26 Aug 2024 08:04:30 +0000 (16:04 +0800)]
riscv: dts: starfive: jh7110-common: Fix lower rate of CPUfreq by setting PLL0 rate to 1.5GHz
CPUfreq supports 4 cpu frequency loads on 375/500/750/1500MHz.
But now PLL0 rate is 1GHz and the cpu frequency loads become
250/333/500/1000MHz in fact.
The PLL0 rate should be default set to 1.5GHz and set the
cpu_core rate to 500MHz in safe.
Fixes: e2c510d6d630 ("riscv: dts: starfive: Add cpu scaling for JH7110 SoC") Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com> Reviewed-by: Hal Feng <hal.feng@starfivetech.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Merge tag 'timers_urgent_for_v6.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Borislav Petkov:
- Remove percpu irq related code in the timer-of initialization routine
as it is broken but also unused (Daniel Lezcano)
- Fix return -ETIME when delta exceeds INT_MAX and the next event not
taking effect sometimes (Jacky Bai)
* tag 'timers_urgent_for_v6.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/imx-tpm: Fix next event not taking effect sometime
clocksource/drivers/imx-tpm: Fix return -ETIME when delta exceeds INT_MAX
clocksource/drivers/timer-of: Remove percpu irq related code
Merge tag 'perf_urgent_for_v6.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Fix perf's AUX buffer serialization
- Prevent uninitialized struct members in perf's uprobes handling
* tag 'perf_urgent_for_v6.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/aux: Fix AUX buffer serialization
uprobes: Use kzalloc to allocate xol area
Merge tag 'char-misc-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/other driver fixes for 6.11-rc7. It's
nothing huge, just a bunch of small fixes of reported problems,
including:
- lots of tiny iio driver fixes
- nvmem driver fixex
- binder UAF bugfix
- uio driver crash fix
- other small fixes
All of these have been in linux-next this week with no reported
problems"
* tag 'char-misc-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
VMCI: Fix use-after-free when removing resource in vmci_resource_remove()
Drivers: hv: vmbus: Fix rescind handling in uio_hv_generic
uio_hv_generic: Fix kernel NULL pointer dereference in hv_uio_rescind
misc: keba: Fix sysfs group creation
dt-bindings: nvmem: Use soc-nvmem node name instead of nvmem
nvmem: Fix return type of devm_nvmem_device_get() in kerneldoc
nvmem: u-boot-env: error if NVMEM device is too small
misc: fastrpc: Fix double free of 'buf' in error path
binder: fix UAF caused by offsets overwrite
iio: imu: inv_mpu6050: fix interrupt status read for old buggy chips
iio: adc: ad7173: fix GPIO device info
iio: adc: ad7124: fix DT configuration parsing
iio: adc: ad_sigma_delta: fix irq_flags on irq request
iio: adc: ads1119: Fix IRQ flags
iio: fix scale application in iio_convert_raw_to_processed_unlocked
iio: adc: ad7124: fix config comparison
iio: adc: ad7124: fix chip ID mismatch
iio: adc: ad7173: Fix incorrect compatible string
iio: buffer-dmaengine: fix releasing dma channel on error
iio: adc: ad7606: remove frstdata check for serial mode
...
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A pile of Qualcomm clk driver fixes with two main themes: the alpha
PLL driver and shared RCGs, and one fix for the Starfive JH7110 SoC.
- The Alpha PLL clk_ops had multiple problems around setting rates.
There are a handful of patches here that fix masks and skip
enabling the clk from set_rate() when the PLL is disabled. The PLLs
are crucial to operation of the system as almost all frequencies in
the system are derived from them.
- Parking shared RCGs at a slow always on clk at registration time
breaks stuff.
USB host mode can't handle such a slow frequency and the serial
console gets all garbled when the UART clk is handed over to the
kernel. There's a few patches that don't use the shared clk_ops for
the UART clks and another one to skip parking the USB clk at
registration time.
- The Starfive PLL driver used for the CPU was busted causing cpufreq
to fail because the clk didn't change to a safe parent during
set_rate().
The fix is to register a notifier and switch to a safe parent so
the PLL can change rate in a glitch free manner"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: gcc-sc8280xp: don't use parking clk_ops for QUPs
clk: starfive: jh7110-sys: Add notifier for PLL0 clock
clk: qcom: gcc-sm8650: Don't use shared clk_ops for QUPs
clk: qcom: gcc-sm8550: Don't park the USB RCG at registration time
clk: qcom: gcc-sm8550: Don't use parking clk_ops for QUPs
clk: qcom: gcc-x1e80100: Don't use parking clk_ops for QUPs
clk: qcom: ipq9574: Update the alpha PLL type for GPLLs
clk: qcom: gcc-x1e80100: Fix USB 0 and 1 PHY GDSC pwrsts flags
clk: qcom: clk-alpha-pll: Update set_rate for Zonda PLL
clk: qcom: clk-alpha-pll: Fix zonda set_rate failure when PLL is disabled
clk: qcom: clk-alpha-pll: Fix the trion pll postdiv set rate API
clk: qcom: clk-alpha-pll: Fix the pll post div mask
Merge tag 'pinctrl-v6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fix from Linus Walleij:
"A single fix for Qualcomm laptops that are affected by
missing wakeup IRQs"
* tag 'pinctrl-v6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: x1e80100: Bypass PDC wakeup parent for now
Merge tag 'linux_kselftest-kunit-fixes-6.11-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
PullKUnit fix from Shuah Khan:
"Fix to a missing function parameter warning found during documentation
build in linux-next"
* tag 'linux_kselftest-kunit-fixes-6.11-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Fix missing kerneldoc comment
Merge tag 'pci-v6.11-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Unregister platform devices for child nodes when stopping a PCI
device, even if the PCI core has already cleared the OF_POPULATED bit
and of_platform_depopulate() doesn't do anything (Bartosz
Golaszewski)
- Rescan the bus from a separate thread so we don't deadlock when
triggering rescan from sysfs (Bartosz Golaszewski)
* tag 'pci-v6.11-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/pwrctl: Rescan bus on a separate thread
PCI: Don't rely on of_platform_depopulate() for reused OF-nodes
Merge tag 'v6.11-rc6-cifs-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- fix potential mount hang
- fix retry problem in two types of compound operations
- important netfs integration fix in SMB1 read paths
- fix potential uninitialized zero point of inode
- minor patch to improve debugging for potential crediting problems
* tag 'v6.11-rc6-cifs-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
netfs, cifs: Improve some debugging bits
cifs: Fix SMB1 readv/writev callback in the same way as SMB2/3
cifs: Fix zero_point init on inode initialisation
smb: client: fix double put of @cfile in smb2_set_path_size()
smb: client: fix double put of @cfile in smb2_rename_path()
smb: client: fix hang in wait_for_response() for negproto
KVM: x86: don't fall through case statements without annotations
clang warns on this because it has an unannotated fall-through between
cases:
arch/x86/kvm/x86.c:4819:2: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough]
and while we could annotate it as a fallthrough, the proper fix is to
just add the break for this case, instead of falling through to the
default case and the break there.
gcc also has that warning, but it looks like gcc only warns for the
cases where they fall through to "real code", rather than to just a
break. Odd.
Fixes: d30d9ee94cc0 ("KVM: x86: Only advertise KVM_CAP_READONLY_MEM when supported by VM") Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Tom Dohrmann <erbse.13@gmx.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix the arm64 usage of ftrace_graph_ret_addr() to pass the
&state->graph_idx pointer instead of NULL, otherwise this function
just returns early"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: stacktrace: fix the usage of ftrace_graph_ret_addr()
Merge tag 'riscv-for-linus-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A revert for the mmap() change that ties the allocation range to the
hint adress, as what we tried to do ended up regressing on other
userspace workloads.
- A fix to avoid a kernel memory leak when emulating misaligned
accesses from userspace.
- A Kconfig fix for toolchain vector detection, which now correctly
detects vector support on toolchains where the V extension depends on
the M extension.
- A fix to avoid failing the linear mapping bootmem bounds check on
NOMMU systems.
- A fix for early alternatives on relocatable kernels.
* tag 'riscv-for-linus-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix RISCV_ALTERNATIVE_EARLY
riscv: Do not restrict memory size because of linear mapping on nommu
riscv: Fix toolchain vector detection
riscv: misaligned: Restrict user access to kernel memory
riscv: mm: Do not restrict mmap address based on hint
riscv: selftests: Remove mmap hint address checks
Revert "RISC-V: mm: Document mmap changes"
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull x86 kvm fixes from Paolo Bonzini:
"Many small fixes that accumulated while I was on vacation...
- Fixup missed comments from the REMOVED_SPTE => FROZEN_SPTE rename
- Ensure a root is successfully loaded when pre-faulting SPTEs
- Grab kvm->srcu when handling KVM_SET_VCPU_EVENTS to guard against
accessing memslots if toggling SMM happens to force a VM-Exit
- Emulate MSR_{FS,GS}_BASE on SVM even though interception is always
disabled, so that KVM does the right thing if KVM's emulator
encounters {RD,WR}MSR
- Explicitly clear BUS_LOCK_DETECT from KVM's caps on AMD, as KVM
doesn't yet virtualize BUS_LOCK_DETECT on AMD
- Cleanup the help message for CONFIG_KVM_AMD_SEV, and call out that
KVM now supports SEV-SNP too
- Specialize return value of
KVM_CHECK_EXTENSION(KVM_CAP_READONLY_MEM), based on VM type
- Remove unnecessary dependency on CONFIG_HIGH_RES_TIMERS
- Note an RCU quiescent state on guest exit. This avoids a call to
rcu_core() if there was a grace period request while guest was
running"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: Remove HIGH_RES_TIMERS dependency
kvm: Note an RCU quiescent state on guest exit
KVM: x86: Only advertise KVM_CAP_READONLY_MEM when supported by VM
KVM: SEV: Update KVM_AMD_SEV Kconfig entry and mention SEV-SNP
KVM: SVM: Don't advertise Bus Lock Detect to guest if SVM support is missing
KVM: SVM: fix emulation of msr reads/writes of MSR_FS_BASE and MSR_GS_BASE
KVM: x86: Acquire kvm->srcu when handling KVM_SET_VCPU_EVENTS
KVM: x86/mmu: Check that root is valid/loaded when pre-faulting SPTEs
KVM: x86/mmu: Fixup comments missed by the REMOVED_SPTE=>FROZEN_SPTE rename
Merge tag 'pm-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix an incorrect warning emitted by the amd-pstate driver on
processors that don't support X86_FEATURE_CPPC (Gautham Shenoy)"
* tag 'pm-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate: Remove warning for X86_FEATURE_CPPC on certain Zen models
Merge tag 'block-6.11-20240906' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Mostly just some fixlets for NVMe, but also a bug fix for the ublk
driver and an integrity fix"
* tag 'block-6.11-20240906' of git://git.kernel.dk/linux:
bio-integrity: don't restrict the size of integrity metadata
ublk_drv: fix NULL pointer dereference in ublk_ctrl_start_recovery()
nvmet: Identify-Active Namespace ID List command should reject invalid nsid
nvme: set BLK_FEAT_ZONED for ZNS multipath disks
nvme-pci: Add sleep quirk for Samsung 990 Evo
nvme-pci: allocate tagset on reset if necessary
nvmet-tcp: fix kernel crash if commands allocation fails
nvme: use better description for async reset reason
nvmet: Make nvmet_debugfs static
Merge tag 'sound-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Hopefully the last PR for 6.11, at least for this level of amount.
In addition to the usual HD-audio quirks, there are more changes in
ASoC, but all look small and device-specific fixes, and nothing stands
out. The only slightly big change is sunxi I2S fix, which looks quite
safe to apply, too"
* tag 'sound-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: hda/realtek - Fix inactive headset mic jack for ASUS Vivobook 15 X1504VAP
ALSA: hda/realtek: Support mute LED on HP Laptop 14-dq2xxx
ALSA: hda/realtek: Enable Mute Led for HP Victus 15-fb1xxx
ALSA: hda/realtek: extend quirks for Clevo V5[46]0
ASoC: codecs: lpass-va-macro: set the default codec version for sm8250
ALSA: hda: add HDMI codec ID for Intel PTL
ALSA: hda/realtek: add patch for internal mic in Lenovo V145
ASoC: sunxi: sun4i-i2s: fix LRCLK polarity in i2s mode
ASoC: amd: yc: Add a quirk for MSI Bravo 17 (D7VEK)
ASoC: mediatek: mt8188-mt6359: Modify key
ASoc: SOF: topology: Clear SOF link platform name upon unload
ALSA: hda/conexant: Add pincfg quirk to enable top speakers on Sirius devices
ASoC: SOF: ipc: replace "enum sof_comp_type" field with "uint32_t"
ASoC: fix module autoloading
ASoC: tda7419: fix module autoloading
ASoC: google: fix module autoloading
ASoC: intel: fix module autoloading
ASoC: tegra: Fix CBB error during probe()
ASoC: dapm: Fix UAF for snd_soc_pcm_runtime object
ASoC: Intel: soc-acpi-cht: Make Lenovo Yoga Tab 3 X90F DMI match less strict
...
Merge tag 'mmc-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Apply SD quirks earlier during probe so they become relevant
MMC host:
- cqhci: Fix checking of CQHCI_HALT state
- dw_mmc: Fix IDMAC operation with pages bigger than 4K
- sdhci-of-aspeed: Fix module autoloading"
* tag 'mmc-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: cqhci: Fix checking of CQHCI_HALT state
mmc: dw_mmc: Fix IDMAC operation with pages bigger than 4K
mmc: sdhci-of-aspeed: fix module autoloading
mmc: core: apply SD quirks earlier during probe
Merge tag 'gpio-fixes-for-v6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix an OF node reference leak in gpio-rockchip
- add the missing module device table to gpio-modepin
* tag 'gpio-fixes-for-v6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: modepin: Enable module autoloading
gpio: rockchip: fix OF node leak in probe()
Merge tag 'pmdomain-v6.11-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fix from Ulf Hansson:
- Fix support for required OPPs for multiple PM domains
* tag 'pmdomain-v6.11-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
OPP: Fix support for required OPPs for multiple PM domains
Merge tag 'pwm/for-6.11-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fix from Uwe Kleine-König:
"Fix an off-by-one in the stm32 driver.
Hardware engineers tend to start counting at 1 while the software guys
usually start with 0. This isn't so nice because that results in
drivers where pwm device #2 needs to use the hardware registers with
index 3.
This was noticed by Fabrice Gasnier.
A small patch fixing that mismatch is the only change included here"
* tag 'pwm/for-6.11-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: stm32: Use the right CCxNP bit in stm32_pwm_enable()
Merge tag 'drm-fixes-2024-09-06' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"This has a fair few patches in it, but I reviewed them all and they
seem like real things, amdgpu, i915 and xe each have a bunch of fixes
for various things, then there is a some bridge suspend/resume
ordering fixes for a recent rework, and then some single driver
changes in a few others.
Nothing looks too serious, hopefully next week is quiet.
amdgpu:
- IPS workaround
- Fix compatibility with older MES firmware
- Fix CPU spikes when clearing VRAM
- Backlight fix
- PMO fix
- Revert SWSMU change to fix regression
i915:
- Do not attempt to load the GSC multiple times
- Fix readout degamma_lut mismatch on ilk/snb
- Mark debug_fence_init_onstack() with __maybe_unused
- fence: Mark debug_fence_free() with __maybe_unused
- display: Add mechanism to use sink model when applying quirk
- display: Increase Fast Wake Sync length as a quirk
komeda:
- zpos normalization fix
nouveau:
- incorrect register fix
imagination:
- memory leak fix
bridge:
- hdmi/bridge rework fixes
panthor:
- cache coherency fix
- hi priority access fix
panel:
- change of compatible string
fbdev:
- deferred-io init with no struct page fix"
* tag 'drm-fixes-2024-09-06' of https://gitlab.freedesktop.org/drm/kernel: (29 commits)
Revert "drm/amdgpu: align pp_power_profile_mode with kernel docs"
drm/fbdev-dma: Only install deferred I/O if necessary
drm/panthor: flush FW AS caches in slow reset path
drm: panel: nv3052c: Correct WL-355608-A8 panel compatible
dt-bindings: display: panel: Rename WL-355608-A8 panel to rg35xx-*-panel
drm/panthor: Restrict high priorities on group_create
drm/xe/display: Avoid encoder_suspend at runtime suspend
drm/xe: Suspend/resume user access only during system s/r
drm/xe/display: Match i915 driver suspend/resume sequences better
drm/xe: Add missing runtime reference to wedged upon gt_reset
drm/xe/pcode: Treat pcode as per-tile rather than per-GT
drm/xe/gsc: Do not attempt to load the GSC multiple times
drm/bridge-connector: reset the HDMI connector state
drm/bridge-connector: move to DRM_DISPLAY_HELPER module
drm/display: stop depending on DRM_DISPLAY_HELPER
drm/i915/display: Increase Fast Wake Sync length as a quirk
drm/i915/display: Add mechanism to use sink model when applying quirk
drm/amd/display: Block timing sync for different signals in PMO
drm/amd/display: Lock DC and exit IPS when changing backlight
drm/amdgpu: always allocate cleared VRAM for GEM allocations
...
Christian Brauner [Fri, 6 Sep 2024 16:22:22 +0000 (18:22 +0200)]
libfs: fix get_stashed_dentry()
get_stashed_dentry() tries to optimistically retrieve a stashed dentry
from a provided location. It needs to ensure to hold rcu lock before it
dereference the stashed location to prevent UAF issues. Use
rcu_dereference() instead of READ_ONCE() it's effectively equivalent
with some lockdep bells and whistles and it communicates clearly that
this expects rcu protection.
dm-integrity: fix a race condition when accessing recalc_sector
There's a race condition when accessing the variable
ic->sb->recalc_sector. The function integrity_recalc writes to this
variable when it makes some progress and the function
dm_integrity_map_continue may read this variable concurrently.
One problem is that on 32-bit architectures the 64-bit variable is not
read and written atomically - it may be possible to read garbage if read
races with write.
Another problem is that memory accesses to this variable are not guarded
with memory barriers.
This commit fixes the race - it moves reading ic->sb->recalc_sector to an
earlier place where we hold &ic->endio_wait.lock.
Merge tag 'asoc-fix-v6.11-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.11
A larger set of fixes than I'd like at this point, but mainly due to
people working on fixing module autoloading by adding missing exports of
ID tables rather than anything particularly concerning. There are some
other runtime fixes and quirks, and a tweak to the ABI definition for
SOF which ensures that a struct layout doesn't vary depending on the
architecture of the host.
Merge tag 'bpf-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Fix crash when btf_parse_base() returns an error (Martin Lau)
- Fix out of bounds access in btf_name_valid_section() (Jeongjun Park)
* tag 'bpf-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add a selftest to check for incorrect names
bpf: add check for invalid name in btf_name_valid_section()
bpf: Fix a crash when btf_parse_base() returns an error pointer
Dave Airlie [Fri, 6 Sep 2024 01:25:38 +0000 (11:25 +1000)]
Merge tag 'drm-misc-fixes-2024-09-05' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A zpos normalization fix for komeda, a register bitmask fix for nouveau,
a memory leak fix for imagination, three fixes for the recent bridge
HDMI work, a potential DoS fix and a cache coherency for panthor, a
change of panel compatible and a deferred-io fix when used with
non-highmem memory.
Merge tag 'net-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can, bluetooth and wireless.
No known regressions at this point. Another calm week, but chances are
that has more to do with vacation season than the quality of our work.
Current release - new code bugs:
- smc: prevent NULL pointer dereference in txopt_get
- eth: ti: am65-cpsw: number of XDP-related fixes
Previous releases - regressions:
- Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over
BREDR/LE", it breaks existing user space
- Bluetooth: qca: if memdump doesn't work, re-enable IBS to avoid
later problems with suspend
- can: mcp251x: fix deadlock if an interrupt occurs during
mcp251x_open
- eth: r8152: fix the firmware communication error due to use of bulk
write
- ptp: ocp: fix serial port information export
- eth: igb: fix not clearing TimeSync interrupts for 82580
- Revert "wifi: ath11k: support hibernation", fix suspend on Lenovo
Previous releases - always broken:
- eth: intel: fix crashes and bugs when reconfiguration and resets
happening in parallel
- wifi: ath11k: fix NULL dereference in ath11k_mac_get_eirp_power()
Misc:
- docs: netdev: document guidance on cleanup.h"
* tag 'net-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
ila: call nf_unregister_net_hooks() sooner
tools/net/ynl: fix cli.py --subscribe feature
MAINTAINERS: fix ptp ocp driver maintainers address
selftests: net: enable bind tests
net: dsa: vsc73xx: fix possible subblocks range of CAPT block
sched: sch_cake: fix bulk flow accounting logic for host fairness
docs: netdev: document guidance on cleanup.h
net: xilinx: axienet: Fix race in axienet_stop
net: bridge: br_fdb_external_learn_add(): always set EXT_LEARN
r8152: fix the firmware doesn't work
fou: Fix null-ptr-deref in GRO.
bareudp: Fix device stats updates.
net: mana: Fix error handling in mana_create_txq/rxq's NAPI cleanup
bpf, net: Fix a potential race in do_sock_getsockopt()
net: dqs: Do not use extern for unused dql_group
sch/netem: fix use after free in netem_dequeue
usbnet: modern method to get random MAC
MAINTAINERS: wifi: cw1200: add net-cw1200.h
ice: do not bring the VSI up, if it was down before the XDP setup
ice: remove ICE_CFG_BUSY locking from AF_XDP code
...
Merge tag 'spi-fix-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small driver specific fixes (including some of the widespread
work on fixing missing ID tables for module autoloading and the revert
of some problematic PM work in spi-rockchip), some improvements to the
MAINTAINERS information for the NXP drivers and the addition of a new
device ID to spidev"
* tag 'spi-fix-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
MAINTAINERS: SPI: Add mailing list imx@lists.linux.dev for nxp spi drivers
MAINTAINERS: SPI: Add freescale lpspi maintainer information
spi: spi-fsl-lpspi: Fix off-by-one in prescale max
spi: spidev: Add missing spi_device_id for jg10309-01
spi: bcm63xx: Enable module autoloading
spi: intel: Add check devm_kasprintf() returned value
spi: spidev: Add an entry for elgin,jg10309-01
spi: rockchip: Resolve unbalanced runtime PM / system PM handling
projects / users / jedix / linux-maple.git / log