Victor Lu [Tue, 19 Dec 2023 00:38:26 +0000 (19:38 -0500)]
drm/amdgpu: Do not program SQ_TIMEOUT_CONFIG in SRIOV
VF should not program this register.
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Zhigang Luo <Zhigang.Luo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lijo Lazar [Thu, 22 Feb 2024 09:24:50 +0000 (14:54 +0530)]
drm/amdkfd: Skip packet submission on fatal error
If fatal error is detected, packet submission won't go through. Return
error in such cases. Also, avoid waiting for fence when fatal error is
detected.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Tue, 20 Feb 2024 03:44:25 +0000 (09:14 +0530)]
drm/amd/display: Prevent potential buffer overflow in map_hw_resources
Adds a check in the map_hw_resources function to prevent a potential
buffer overflow. The function was accessing arrays using an index that
could potentially be greater than the size of the arrays, leading to a
buffer overflow.
Adds a check to ensure that the index is within the bounds of the
arrays. If the index is out of bounds, an error message is printed and
break it will continue execution with just ignoring extra data early to
prevent the buffer overflow.
Ma Jun [Wed, 21 Feb 2024 09:16:49 +0000 (17:16 +0800)]
drm/amdgpu: Fix the runtime resume failure issue
Don't set power state flag when system enter runtime suspend,
or it may cause runtime resume failure issue.
Fixes: 3a9626c816db ("drm/amd: Stop evicting resources on APUs in suspend") Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Melissa Wen [Fri, 16 Feb 2024 12:23:19 +0000 (09:23 -0300)]
drm/amd/display: fix null-pointer dereference on edid reading
Use i2c adapter when there isn't aux_mode in dc_link to fix a
null-pointer derefence that happens when running
igt@kms_force_connector_basic in a system with DCN2.1 and HDMI connector
detected as below:
Ilpo Järvinen [Thu, 15 Feb 2024 13:31:54 +0000 (15:31 +0200)]
drm/amdgpu: Use RMW accessors for changing LNKCTL2
Convert open coded RMW accesses for LNKCTL2 to use
pcie_capability_clear_and_set_word() which makes its easier to
understand what the code tries to do.
LNKCTL2 is not really owned by any driver because it is a collection of
control bits that PCI core might need to touch. RMW accessors already
have support for proper locking for a selected set of registers
(LNKCTL2 is not yet among them but likely will be in the future) to
avoid losing concurrent updates.
Acked-by: Alex Deucher <alexander.deucher@amd.com> Suggested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kunwu Chan [Wed, 21 Feb 2024 09:59:07 +0000 (17:59 +0800)]
drm/amdgpu: Simplify the allocation of sync slab caches
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Kunwu Chan <chentao@kylinos.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Veerabadhran Gopalakrishnan [Tue, 30 Jan 2024 13:40:12 +0000 (19:10 +0530)]
drm/amdgpu/soc21: Enabling PG and CG flags for VCN 4.0.6
Enabled the VCN Power Gating and Clock Gating flags for VCN 4.0.6.
Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Thu, 15 Feb 2024 12:55:40 +0000 (18:25 +0530)]
drm/amdgpu/display: Address kdoc for 'is_psr_su' in 'fill_dc_dirty_rects'
The is_psr_su parameter is a boolean flag indicating whether the Panel
Self Refresh Selective Update (PSR SU) feature is enabled which is a
power-saving feature that allows only the updated regions of the screen
to be refreshed, reducing the amount of data that needs to be sent to
the display.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5257: warning: Function parameter or member 'is_psr_su' not described in 'fill_dc_dirty_rects'
Fixes: d16df040c8da ("drm/amdgpu: make damage clips support configurable") Cc: stable@vger.kernel.org Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ilpo Järvinen [Thu, 15 Feb 2024 13:31:53 +0000 (15:31 +0200)]
drm/radeon: Use RMW accessors for changing LNKCTL2
Convert open coded RMW accesses for LNKCTL2 to use
pcie_capability_clear_and_set_word() which makes its easier to
understand what the code tries to do.
LNKCTL2 is not really owned by any driver because it is a collection of
control bits that PCI core might need to touch. RMW accessors already
have support for proper locking for a selected set of registers
(LNKCTL2 is not yet among them but likely will be in the future) to
avoid losing concurrent updates.
Acked-by: Alex Deucher <alexander.deucher@amd.com> Suggested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: 743b9786b14a ("drm/amd/display: Hook up the DMUB service in DM") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lenko Donchev [Sun, 28 Jan 2024 09:04:38 +0000 (03:04 -0600)]
drm/amd/display: Use kcalloc() instead of kzalloc()
We are trying to get rid of all multiplications from allocation
functions to prevent integer overflows. Here the multiplication is
obviously safe, but using kcalloc() is more appropriate and improves
readability. This patch has no effect on runtime behavior.
Kunwu Chan [Wed, 21 Feb 2024 09:59:06 +0000 (17:59 +0800)]
drm/amdgpu: Simplify the allocation of mux_chunk slab caches
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Kunwu Chan <chentao@kylinos.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kunwu Chan [Wed, 21 Feb 2024 09:59:05 +0000 (17:59 +0800)]
drm/amdgpu: Simplify the allocation of fence slab caches
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Kunwu Chan <chentao@kylinos.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Veerabadhran Gopalakrishnan [Mon, 12 Feb 2024 07:45:27 +0000 (13:15 +0530)]
drm/amdgpu/soc21: Added Video Capabilities for VCN 406
Updated Query Video codecs for VCN 406
Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Veerabadhran Gopalakrishnan [Thu, 1 Feb 2024 07:11:29 +0000 (12:41 +0530)]
drm/amdgpu/vcn: Enable VCN 4.0.6 Support
Modified driver to use the appropriate FW files and instance.
v2: squash in fixes (Alex)
Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jonathan Kim [Wed, 21 Feb 2024 10:20:34 +0000 (05:20 -0500)]
drm/amdkfd: fix process reference drop on debug ioctl
Prevent dropping the KFD process reference at the end of a debug
IOCTL call where the acquired process value is an error.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Victor Lu [Tue, 19 Dec 2023 15:22:19 +0000 (10:22 -0500)]
drm/amdgpu: Use correct SRIOV macro for gmc_v9_0_vm_fault_interrupt_state
Under SRIOV, programming to VM_CONTEXT*_CNTL regs failed because the
current macro does not pass through the correct xcc instance.
Use the *REG32_XCC macro in this case.
The behaviour without SRIOV is the same without this patch.
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Zhigang Luo <Zhigang.Luo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Victor Lu [Tue, 13 Feb 2024 22:28:40 +0000 (17:28 -0500)]
drm/amdgpu: Do not program IH_CHICKEN in vega20_ih.c under SRIOV
IH_CHICKEN is blocked for VF writes; this access should be skipped.
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Victor Lu [Mon, 12 Feb 2024 22:33:45 +0000 (17:33 -0500)]
drm/amdgpu: Improve error checking in amdgpu_virt_rlcg_reg_rw (v2)
The current error detection only looks for a timeout.
This should be changed to also check scratch_reg1 for any errors
returned from RLCG.
v2: remove new error value
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rodrigo Siqueira [Tue, 13 Feb 2024 21:35:55 +0000 (14:35 -0700)]
drm/amd/display: Drop unnecessary header
A long time ago, the slab header was added to multiple files in DC. We
also included it in the os_types.h, which is included in many of those
DC files. At this point, there is no need to insert the slab.h header in
multiple files, so this commit drops those includes.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Fri, 9 Feb 2024 19:00:27 +0000 (14:00 -0500)]
drm/amd/display: reenable windowed mpo odm support on dcn32 and dcn321
[why]
The feature was disabled due to regression found during testing. Now
that all the pending issues are addressed, we are reenabling the power
saving feature again.
The feature optimizes dispclk level when user is using MPO capable
broswers or watching MPO capable videos in windowed mode. The feature
achieves power optimization by utilizing free pipes to process incoming
pixels in parallel. So it reduces max dispclk requirements for each
pipe.
Previously ODM power optimization will be disabled when MPO plane is
present due to technical challeges. This is mainly because ODM divides
pixel workload with respect to stream but MPO plane position and size
are arbitrary with respect to stream. The pixel processing workload of
an MPO plane is not guarenteed to be evenly distributed across DCN pipes.
For example if a plane is moved inside single ODM slice, all the
processing for the plane is distributed to the pipe in the current ODM
slice, while the other ODM slices don't need to process this plane. If
the plane is then moved to the middle crosing two ODM slices, each ODM
slice gets half of the workload. This is especially difficult when the
plane itself has a large source rect which can't be processed by single
DCN pipe. In this case we can't enable ODM power optimization when the
plane is only within one ODM slice.
[how]
To overcome the challeges, new pipe resource management is in place to
make sure a plane is validated with ODM power optimization support if
it can be validated regardless of its position and the same pipe
topology can be used regardless of the plane's position. When the plane
is moved outside current ODM slice, we will set recout to 0 so the pipe
can be idling without the need to update pipe topology. When the user
resizes a plane, it may result in downscaling ratio changes. When the
downscaling ratio is above single pipe's threshold, we will seamlessly
exit ODM power optimization and applies MPC combine to support the plane.
when downscaling ratio becomes smaller, we will seamlessly enter ODM
power optimization again. All these pipe transitions happen
automatically and quietly when the conditions are met without any visual
impacts to the user.
Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Swapnil Patel [Tue, 6 Feb 2024 16:40:20 +0000 (11:40 -0500)]
drm/amd/display: fix input states translation error for dcn35 & dcn351
[Why]
Currently there is an error while translating input clock sates into
output clock states. The highest fclk setting from output sates is
being dropped because of this error.
[How]
For dcn35 and dcn351, make output_states equal to input states.
Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Swapnil Patel <swapnil.patel@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Wed, 7 Feb 2024 19:00:10 +0000 (14:00 -0500)]
drm/amd/display: Generalize new minimal transition path
Previously the new minimal transition path was only used for windowed
MPO + ODM for plane scaling updates. However, we want to generalize the
transition for all cases whenever a non-seamless transition is detected
(such as for MPO -> SubVP + MPC).
To make this change we add pointers in the plane state, stream, and
pointers in the stream state to the dc_scratch state and backup and
restore these so the minimal transition can take place successfully.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen [Tue, 6 Feb 2024 21:08:49 +0000 (16:08 -0500)]
drm/amd/display: Check DP Alt mode DPCS state via DMUB
[Why]
Currently, driver state for DCN3.2 is not strictly matching HW state for
the USBC port. To reduce inconsistencies while debugging, the driver
should match HW configuration.
[How]
Update link encoder flag to indicate USBC port. Call into DMUB to check
when DP Alt mode is entered, and also to check for 2-lane versuse 4-lane
mode.
Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Mon, 19 Feb 2024 06:13:16 +0000 (11:43 +0530)]
drm/amd/display: Fix potential null pointer dereference in dc_dmub_srv
Fixes potential null pointer dereference warnings in the
dc_dmub_srv_cmd_list_queue_execute() and dc_dmub_srv_is_hw_pwr_up()
functions.
In both functions, the 'dc_dmub_srv' variable was being dereferenced
before it was checked for null. This could lead to a null pointer
dereference if 'dc_dmub_srv' is null. The fix is to check if
'dc_dmub_srv' is null before dereferencing it.
Thus moving the null checks for 'dc_dmub_srv' to the beginning of the
functions to ensure that 'dc_dmub_srv' is not null when it is
dereferenced.
Found by smatch & thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:133 dc_dmub_srv_cmd_list_queue_execute() warn: variable dereferenced before check 'dc_dmub_srv' (see line 128)
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_is_hw_pwr_up() warn: variable dereferenced before check 'dc_dmub_srv' (see line 1164)
Fixes: 028bac583449 ("drm/amd/display: decouple dmcub execution to reduce lock granularity") Fixes: 65138eb72e1f ("drm/amd/display: Add DCN35 DMUB") Cc: JinZe.Xu <jinze.xu@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Josip Pavic <josip.pavic@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Mon, 5 Feb 2024 22:13:40 +0000 (17:13 -0500)]
drm/amd/display: Fix S4 hang polling on HW power up done for VBIOS DMCUB
[Why]
VBIOS DMCUB firmware doesn't set the dal_fw bit and we end up hanging
waiting for HW power up done because of it.
[How]
Simplify the path and allow mailbox_rdy to be a functional check when
we detect VBIOS firmware.
Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wayne Lin [Fri, 2 Feb 2024 09:34:11 +0000 (17:34 +0800)]
drm/amd/display: adjust few initialization order in dm
[Why]
Observe error message "Can't retrieve aconnector in hpd_rx_irq_offload_work"
when boot up with a mst tbt4 dock connected. After analyzing, there are few
parts needed to be adjusted:
1. hpd_rx_offload_wq[].aconnector is not initialzed before the dmub outbox
hpd_irq handler get registered which causes the error message.
2. registeration of hpd and hpd_rx_irq event for usb4 dp tunneling is not
aligned with legacy interface sequence
[How]
Put DMUB_NOTIFICATION_HPD and DMUB_NOTIFICATION_HPD_IRQ handler
registration into register_hpd_handlers() to align other interfaces and
get hpd_rx_offload_wq[].aconnector initialized earlier than that.
Leave DMUB_NOTIFICATION_AUX_REPLY registered as it was since we need that
while calling dc_link_detect(). USB4 connection status will be proactively
detected by dc_link_detect_connection_type() in amdgpu_dm_initialize_drm_device()
Cc: Stable <stable@vger.kernel.org> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Thu, 15 Feb 2024 13:08:16 +0000 (18:38 +0530)]
drm/amd/display: Add 'replay' NULL check in 'edp_set_replay_allow_active()'
In the first if statement, we're checking if 'replay' is NULL. But in
the second if statement, we're not checking if 'replay' is NULL again
before calling replay->funcs->replay_set_power_opt().
If 'replay' is NULL, this will cause a null pointer dereference.
Fixes the below found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_edp_panel_control.c:895 edp_set_replay_allow_active() error: we previously assumed 'replay' could be null (see line 887)
Fixes: c7ddc0a800bc ("drm/amd/display: Add Functions to enable Freesync Panel Replay") Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Suggested-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Thu, 15 Feb 2024 12:26:55 +0000 (17:56 +0530)]
drm/amdgpu: Fix missing parameter descriptions in ih_v7_0.c
Rectifies kdoc warnings related to the 'ih' parameter in the
'ih_v7_0_get_wptr', 'ih_v7_0_irq_rearm', and 'ih_v7_0_set_rptr'
functions within the 'ih_v7_0.c' file.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/ih_v7_0.c:392: warning: Function parameter or member 'ih' not described in 'ih_v7_0_get_wptr'
drivers/gpu/drm/amd/amdgpu/ih_v7_0.c:432: warning: Function parameter or member 'ih' not described in 'ih_v7_0_irq_rearm'
drivers/gpu/drm/amd/amdgpu/ih_v7_0.c:458: warning: Function parameter or member 'ih' not described in 'ih_v7_0_set_rptr'
Fixes: 12443fc53e7d ("drm/amdgpu: Add ih v7_0 ip block support") Cc: Likun Gao <Likun.Gao@amd.com> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Thu, 25 Jan 2024 19:12:43 +0000 (14:12 -0500)]
drm/amdkfd: Relocate TBA/TMA to opposite side of VM hole
The TBA and TMA, along with an unused IB allocation, reside at low
addresses in the VM address space. A stray VM fault which hits these
pages must be serviced by making their page table entries invalid.
The scheduler depends upon these pages being resident and fails,
preventing a debugger from inspecting the failure state.
By relocating these pages above 47 bits in the VM address space they
can only be reached when bits [63:48] are set to 1. This makes it much
less likely for a misbehaving program to generate accesses to them.
The current placement at VA (PAGE_SIZE*2) is readily hit by a NULL
access with a small offset.
v2:
- Move it to the reserved space to avoid concflicts with Mesa
- Add macros to make reserved space management easier
v3:
- Move VM max PFN calculation into AMDGPU_VA_RESERVED macros
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Cc: Christian Koenig <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Sun, 4 Feb 2024 17:59:07 +0000 (12:59 -0500)]
drm/amd/display: 3.2.272
Summary:
* Revert some changes related to pixel encoding and clocks that cause
corruption
* IPS hang fix and FGCG enable by default for DCN35
* PSR-SU/Replay fixes
* Plane clip size change treated as medium update
* Fix for checking link alignment done during link training.
* HDMI compliance test fixes and other improvements
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Thu, 26 Oct 2023 09:53:26 +0000 (17:53 +0800)]
drm/amdgpu/psp: set boot_time_tmr flag
Set boot_time_tmr flag for the ASIC which MP0 ip version
newer than 14.0.2
For runtime TMR:
Init tmr and load tmr should did.
For boottime TMR:
If do not support autoload, skip init TMR.
If support autoload, excute init TMR but skip load tmr.
Likun Gao [Thu, 26 Oct 2023 09:28:19 +0000 (17:28 +0800)]
drm/amdgpu/psp: set autoload support by default
Set psp->autoload_supported to true by default,
as only a few version of ASIC not support autoload,
and the furture version of PSP should support this.
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Tue, 30 Jan 2024 19:34:41 +0000 (14:34 -0500)]
drm/amdgpu: Reduce VA_RESERVED_BOTTOM to 64KB
The reservation is there to catch NULL pointer dereferences from the
GPU. Reduce the size to 64KB to make sure that shared virtual address
programming models can map all CPU-accessible virtual addresses for GPU
access. This is also the default for CPU virtual address mappings as
seen in /proc/sys/vm/mmap_min_addr.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rajneesh Bhardwaj [Sat, 10 Feb 2024 01:23:19 +0000 (20:23 -0500)]
drm/amdgpu: Fix implicit assumtion in gfx11 debug flags
Gfx11 debug flags mask is currently set with an implicit assumption that
no other mqd update flags exist. This needs to be fixed with newly
introduced flag UPDATE_FLAG_IS_GWS by the previous patch.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rajneesh Bhardwaj [Thu, 1 Feb 2024 00:33:49 +0000 (19:33 -0500)]
drm/amdkfd: update SIMD distribution algo for GFXIP 9.4.2 onwards
In certain cooperative group dispatch scenarios the default SPI resource
allocation may cause reduced per-CU workgroup occupancy. Set
COMPUTE_RESOURCE_LIMITS.FORCE_SIMD_DIST=1 to mitigate soft hang
scenarions.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Suggested-by: Joseph Greathouse <Joseph.Greathouse@amd.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Martin Tsai [Fri, 2 Feb 2024 06:39:29 +0000 (14:39 +0800)]
drm/amd/display: should support dmub hw lock on Replay
[Why]
Without acquiring DMCUB hw lock, a race condition is caused with
Panel Replay feature, which will trigger a hang. Indicate that a
lock is necessary to prevent this when replay feature is enabled.
[How]
To allow dmub hw lock on Replay.
Reviewed-by: Robin Chen <robin.chen@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Martin Tsai <martin.tsai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Wed, 31 Jan 2024 16:39:19 +0000 (11:39 -0500)]
drm/amd/display: allow psr-su/replay for z8
[why]
allow psr-su/replay for z8
Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Charlene Liu <charlene.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Sun, 11 Feb 2024 03:34:19 +0000 (09:04 +0530)]
drm/amdgpu/display: Initialize gamma correction mode variable in dcn30_get_gamcor_current()
The dcn30_get_gamcor_current() function is responsible for determining
the current gamma correction mode used by the display controller.
However, the 'mode' variable, which stores the gamma correction mode,
was not initialized before its first usage, leading to an uninitialized
symbol error.
Thus initializes the 'mode' variable with a default value of LUT_BYPASS
before the conditional statements in the function, improves code clarity
and stability, ensuring correct behavior of the
dcn30_get_gamcor_current() function in determining the gamma correction
mode.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_dpp_cm.c:77 dpp30_get_gamcor_current() error: uninitialized symbol 'mode'.
Fixes: 03f54d7d3448 ("drm/amd/display: Add DCN3 DPP") Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by: Roman Li <roman.li@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Tue, 30 Jan 2024 20:24:56 +0000 (15:24 -0500)]
drm/amd/display: Add shared firmware state for DMUB IPS handshake
[Why]
Read modify write hazards can occur when using a single shared scratch
register between driver and firmware leading to driver accessing DCN
in IPS2 and a system hang.
[How]
Add infrastructure for using REGION6 as a shared firmware state between
driver and firmware. This region is uncachable.
Replace the existing get/set idle calls with reads/writes to the
(volatile) shared firmware state blocks that a separated by at least
a cache line between firmware and driver.
Remove the workarounds that required rewriting/checking read modify
write hazards.
Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Tue, 30 Jan 2024 23:07:24 +0000 (18:07 -0500)]
drm/amd/display: Fix array-index-out-of-bounds in dcn35_clkmgr
[Why]
There is a potential memory access violation while
iterating through array of dcn35 clks.
[How]
Limit iteration per array size.
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michael Strauss [Fri, 12 Jan 2024 17:19:40 +0000 (12:19 -0500)]
drm/amd/display: Update FIXED_VS Retimer HWSS Test Pattern Sequences
[WHY]
Need to fix some broken logic and sequencing in initial commit
[HOW]
Fix logic handling override deprogramming when exiting SQ128.
Don't exit early from dp_set_hw_lane_settings for DP2/FIXED_VS case.
Move LTTPR 128b/132b check out of requires_hwss and check during
runtime, as LTTPR caps are not populated on initial call.
Add pending_test_pattern to link state to allow HWSS to set FFE overrides
on retimer TX and/or skip setting APU TX FFE depending on requested pattern.
Use updated clock source for SQ128 override sequence.
Skip HW FFE preset programming when performing test pattern overrides.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Tue, 30 Jan 2024 00:30:12 +0000 (19:30 -0500)]
drm/amd/display: enable fgcg by default
[why]
sw has most of the fgcg enabled which is the same as HW default.
but driver disabled some due to enable flag not initialized.
comparing HW state, we still need to enable dpp and dio.
Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Charlene Liu <charlene.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Tue, 30 Jan 2024 19:29:08 +0000 (14:29 -0500)]
drm/amd/display: treat plane clip size change as MED update type
[why]
When clip size is changed recout and viewport size would require an
update. When the update is clip size only current driver fails to
program the update into hardware.
[how]
Set a new clip_size_change flag when it is detected and set MED update
type and reprogram scaling params in next program pipe.
Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / users / dwmw2 / linux.git / log