Add regulator supply into PWBUS_REGULATOR macro. This makes it optional
to define a vin-supply in DT. Not defining a supply will add a dummy
regulator supply instead and only cause the following debug output:
```
Looking up vin-supply property in node [...] failed
```
Armin Wolf [Tue, 15 Feb 2022 19:11:10 +0000 (20:11 +0100)]
hwmon: (dell-smm) Improve temperature sensors detection
On the Dell Inspiron 3505, three temperature sensors are
available through the SMM interface. However since they
do not have an associated type, they are not detected.
Probe for those sensors in case no type was detected.
_i8k_get_temp() is used instead of i8k_get_temp()
since it is sometimes faster and the result is
easier to check (no -ENODATA) since we do not
care about the actual temp value.
Armin Wolf [Tue, 15 Feb 2022 19:11:09 +0000 (20:11 +0100)]
hwmon: (dell-smm) Make fan/temp sensor number a u8
Right now, we only use bits 0 to 7 of the fan/temp sensor number
by doing number & 0xff. Passing the value as a u8 makes this
step unnecessary. Also add checks to the ioctl handler since
users might get confused when passing 0x00000101 does the same
as passing 0x00000001.
Armin Wolf [Tue, 15 Feb 2022 19:11:12 +0000 (20:11 +0100)]
hwmon: (dell-smm) Add SMM interface documentation
Document the SMM interface as requested by Pali Rohar.
Since Dell does not offer any offical documentation
regarding the SMM interface, the necessary information
was extracted from the dell_smm_hwmon driver and other
sources.
Armin Wolf [Tue, 15 Feb 2022 19:11:13 +0000 (20:11 +0100)]
hwmon: (dell-smm) Reword and mark parameter "force" as unsafe
When enabling said module parameter, the driver ignores
all feature blacklists on relevant models, which has the
potential for strange side effects. Also there seems to
be a slight chance for unsupported devices to behave
badly when probed for features.
In such cases, the kernel should be tainted to inform
people that these issues might have been caused by
the dell_smm_hwmon driver with "force" enabled.
Also reword the parameter description to remind users
that enabling "force" also enables blacklisted features.
Eddie James [Tue, 15 Feb 2022 15:10:21 +0000 (09:10 -0600)]
hwmon: (occ) Add sysfs entries for additional extended status bits
Add sysfs entries for DVFS due to a VRM Vdd over-temperature condition,
and add the GPU throttling condition bits (such that if bit 1 is set,
GPU1 is throttling).
Eddie James [Tue, 15 Feb 2022 15:10:19 +0000 (09:10 -0600)]
hwmon: (occ) Add sysfs entry for IPS (Idle Power Saver) status
BMC control applications need to check the Idle Power Saver status
byte returned by the OCC poll response, so export it in sysfs with
the other OCC-specific data.
Eugene Shalygin [Thu, 17 Feb 2022 19:43:18 +0000 (20:43 +0100)]
hwmon: (asus-ec-sensors) do not print from .probe()
Remove the call to dev_info() from the board detection function, which
is called from probe(), not only to be in line with hwmon driver rules, but
also because the message duplicates the error code returned from probe()
for that case (ENODEV).
Zev Weiss [Sat, 19 Feb 2022 00:07:42 +0000 (16:07 -0800)]
hwmon: (pmbus/lm25066) Add regulator support
While these chips aren't strictly advertised as voltage regulators per
se, they (aside from the lm25056) support the PMBus OPERATION command
to enable and disable their outputs and have status bits for reporting
various warnings and faults, and can hence usefully support all the
pmbus_regulator_ops operations.
Zev Weiss [Sat, 19 Feb 2022 00:03:59 +0000 (16:03 -0800)]
hwmon: (pmbus) Add get_error_flags support to regulator ops
The various PMBus status bits don't all map perfectly to the more
limited set of REGULATOR_ERROR_* flags, but there's a reasonable
number where they correspond well enough.
Eugene Shalygin [Fri, 11 Feb 2022 16:48:55 +0000 (17:48 +0100)]
hwmon: (asus-ec-sensors) deduce sensor signedness from its type
Reading DSDT code for ASUS X470-based boards (the ones served by the
asus_wmi_Sensors driver), where ASUS put hardware monitoring functions
into the WMI code, reveals that fan and current sensors data is
unsigned. For the current sensor that was confirmed by a user who showed
high enough current value for overflow.
Thus let's assume that the signedness of the sensors is determined by its
type and that only temperature ones provide signed numbers.
Christian Lamparter [Sun, 13 Feb 2022 00:47:33 +0000 (01:47 +0100)]
hwmon: (tc654) Add thermal_cooling device support
Adds thermal_cooling device support to the tc654/tc655
driver. This make it possible to integrate it into a
device-tree supported thermal-zone node as a
cooling device.
I have been using this patch as part of the Netgear WNDR4700
Centria NAS Router support within OpenWrt since 2016.
Mateusz Jończyk [Sat, 12 Feb 2022 12:56:54 +0000 (13:56 +0100)]
hwmon: (dell-smm) rewrite CONFIG_I8K description
It is not the laptops, but the /proc/i8k interface that is legacy (or so
I think was the intention of the help text author). The old description
was confusing, fix this.
The phrase "Say Y if you intend to run this kernel on old Dell laptops
or want to use userspace package i8kutils." was introduced in 2015, in
commit 039ae58503f3 ("hwmon: Allow to compile dell-smm-hwmon driver without /proc/i8k")
I think that "old laptops" was about hotkey and Fn key support - this
driver in the 2.4 kernels' era apparently had these capabilities
(see: https://github.com/vitorafsr/i8kutils , description of
"repeat_rate" kernel module parameter).
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Cc: Pali Rohár <pali@kernel.org> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Mark Gross <markgross@kernel.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20220212125654.357408-2-mat.jonczyk@o2.pl Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Mateusz Jończyk [Sat, 12 Feb 2022 12:56:53 +0000 (13:56 +0100)]
x86/Kconfig: move and modify CONFIG_I8K
In Kconfig, inside the "Processor type and features" menu, there is
the CONFIG_I8K option: "Dell i8k legacy laptop support". This is
very confusing - enabling CONFIG_I8K is not required for the kernel to
support old Dell laptops. This option is specific to the dell-smm-hwmon
driver, which mostly exports some hardware monitoring information and
allows the user to change fan speed.
This option is misplaced, so move CONFIG_I8K to drivers/hwmon/Kconfig,
where it belongs.
Also, modify the dependency order - change
select SENSORS_DELL_SMM
to
depends on SENSORS_DELL_SMM
as it is just a configuration option of dell-smm-hwmon. This includes
changing the option type from tristate to bool. It was tristate because
it could select CONFIG_SENSORS_DELL_SMM=m .
When running "make oldconfig" on configurations with
CONFIG_SENSORS_DELL_SMM enabled , this change will result in an
additional question (which could be printed several times during
bisecting). I think that tidying up the configuration is worth it,
though.
Next patch tweaks the description of CONFIG_I8K.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Cc: Pali Rohár <pali@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Mark Gross <markgross@kernel.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20220212125654.357408-1-mat.jonczyk@o2.pl Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Eugene Shalygin [Tue, 8 Feb 2022 09:42:43 +0000 (10:42 +0100)]
hwmon: (asus-ec-sensors) add CPU core voltage
A user discovered [1] the CPU Core voltage sensor, which spans 2
registers and provides output in mV. Althroug the discovery was made
with a X470 chipset, the sensor is present in X570 (tested with C8H).
For now simply add it to each board with the CPU current sensor present.
Cosmin Tanislav [Tue, 21 Dec 2021 21:58:37 +0000 (23:58 +0200)]
hwmon: (adt7x10) Use devm_hwmon_device_register_with_info
Describe the only available channel, implement read, write
and is_visible callbacks.
Also, pass name to core driver for the i2c device so that
it can be used to register hwmon device.
Guenter Roeck [Thu, 23 Dec 2021 18:32:05 +0000 (10:32 -0800)]
hwmon: (adt7x10) Convert to use regmap
Using regmap lets us use the regmap subsystem for SPI vs. I2C register
accesses. It lets us hide access differences in backend code and lets
the common code just access registers without knowing their size.
We can also use regmap for register caching.
Eugene Shalygin [Fri, 4 Feb 2022 16:30:45 +0000 (17:30 +0100)]
hwmon: (asus-ec-sensors) read sensors as signed ints
Temperature sensor readings are signed, which is hinted by their blank
value (oxd8, 216 as unsigned and -40 as signed). T_Sensor, Crosshair
VIII Hero, and a freezer were used to confirm that.
Here we read fan sensors as signed too, because with their typical
values and 2-byte width, I can't tell a difference between signed and
unsigned, as I don't have a high speed chipset fan.
Vadim Pasternak [Wed, 26 Jan 2022 14:18:25 +0000 (16:18 +0200)]
hwmon: (mlxreg-fan) Use pwm attribute for setting fan speed low limit
Recently 'cur_state' user space 'sysfs' interface 'sysfs' has been
deprecated. This interface is used in Nvidia systems for setting fan
speed limit. Currently fan speed limit is set from the user space by
setting 'sysfs' 'cur_state' attribute to 'max_state + n', where 'n' is
required limit, for example: 15 for 50% speed limit, 20 for full fan
speed enforcement.
The purpose of this feature is to provides ability to limit fan speed
according to some system wise considerations, like absence of some
replaceable units (PSU or line cards), high system ambient temperature,
unreliable transceivers temperature sensing or some other factors which
indirectly impacts system's airflow.
The motivation is to support fan low limit feature through 'hwmon'
interface.
Use 'hwmon' 'pwm' attribute for setting low limit for fan speed in
case 'thermal' subsystem is configured in kernel. In this case setting
fan speed through 'hwmon' will never let the 'thermal' subsystem to
select a lower duty cycle than the duty cycle selected with the 'pwm'
attribute.
From other side, fan speed is to be updated in hardware through 'pwm'
only in case the requested fan speed is above last speed set by
'thermal' subsystem, otherwise requested fan speed will be just stored
with no PWM update.
Eugene Shalygin [Mon, 24 Jan 2022 01:56:43 +0000 (02:56 +0100)]
hwmon: (asus-ec-sensors) add driver for ASUS EC
This driver provides the same data as the asus_wmi_ec_sensors driver
(and gets it from the same source) but does not use WMI, polling
the ACPI EC directly.
That provides two enhancements: sensor reading became quicker (on some
systems or kernel configuration it took almost a full second to read
all the sensors, that transfers less than 15 bytes of data), the driver
became more flexible. The driver now relies on ACPI mutex to lock access
to the EC in the same way as the WMI code does.
Armin Wolf [Mon, 31 Jan 2022 21:19:35 +0000 (22:19 +0100)]
hwmon: (sch56xx-common) Replace WDOG_ACTIVE with WDOG_HW_RUNNING
If the watchdog was already enabled by the BIOS after booting, the
watchdog infrastructure needs to regularly send keepalives to
prevent a unexpected reset.
WDOG_ACTIVE only serves as an status indicator for userspace,
we want to use WDOG_HW_RUNNING instead.
Since my Fujitsu Esprimo P720 does not support the watchdog,
this change is compile-tested only.
Suggested-by: Guenter Roeck <linux@roeck-us.net> Fixes: fb551405c0f8 (watchdog: sch56xx: Use watchdog core) Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20220131211935.3656-5-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Armin Wolf [Mon, 31 Jan 2022 21:19:34 +0000 (22:19 +0100)]
hwmon: (sch56xx-common) Replace msleep() with usleep_range()
msleep(1) will often sleep more than 20ms, slowing down sensor
and watchdog reads/writes. Use usleep_range() as recommended
in timers-howto.rst to fix that.
Armin Wolf [Mon, 31 Jan 2022 21:19:33 +0000 (22:19 +0100)]
hwmon: (sch56xx-common) Add automatic module loading on supported devices
This patch enables the sch56xx-common module to get automatically
loaded on supported machines.
If a machine supports Fujitsu's SCH56XX-based hardware monitoring
solutions, it contains a "Antiope"/" Antiope" dmi onboard device
in case of the sch5627 or a "Theseus"/" Theseus" dmi onboard device
in case of the sch5636.
Since some machines like the Esprimo C700 have a seemingly faulty
DMI table containing both onboard devices, the driver still needs
to probe for the individual superio chip, which in presence of at
least one DMI onboard device however can be considered safe.
Also add a module parameter allowing for bypassing the
DMI check.
Armin Wolf [Mon, 31 Jan 2022 21:19:32 +0000 (22:19 +0100)]
hwmon: (sch56xx) Autoload modules on platform device creation
Right now, when sch56xx-common has detected a SCH5627/SCH5636
superio chip, the corresponding module is not automatically
loaded.
Fix that by adding the necessary device tables to both modules.
Michael Shych [Tue, 18 Jan 2022 07:56:11 +0000 (09:56 +0200)]
hwmon: (powr1220) Add support for Lattice's POWR1014 power manager IC
This patch adds support for Lattice's POWR1014 power manager IC.
Read access to all the ADCs on the chip are supported through
the "hwmon" "sysfs" files.
The main differences of POWR1014 compared to POWR1220 are
amount of VMON input lines: 10 on POWR1014 and 12 lines on POWR1220 and
number of output control signals: 14 on POWR1014 and 20 on POWR1220.
Michael Shych [Tue, 18 Jan 2022 07:56:10 +0000 (09:56 +0200)]
hwmon: (powr1220) Upgrade driver to support hwmon info infrastructure
Reduce code by using devm_hwmon_device_register_with_groups() API by
devm_hwmon_device_register_with_info() API.
The motivation is to reduce code and to allow easy support for similar
devices by the same driver.
Rob Herring [Wed, 19 Jan 2022 01:55:13 +0000 (19:55 -0600)]
dt-bindings: hwmon: lm90: Drop Tegra specifics from example
There's no need to complicate examples with a platform specific macro.
It also complicates example parsing to figure out the number of
interrupt cells in examples (based on bracketing).
Dmitry Baryshkov [Mon, 10 Jan 2022 02:47:12 +0000 (05:47 +0300)]
hwmon: (nct6775) add PRIME B550-PLUS motherboard to whitelist
Asus PRIME B550-PLUS motherboards have got an nct6775 chip. Its resource
range is covered by the \AMW0.SHWM OpRegion, so the chip is unusable
when using SIO. However ASUS WMI access works.
Add PRIME B550-PLUS to the list of motherboards using ASUS WMI to read
data.
Paul Cercueil [Mon, 10 Jan 2022 18:22:56 +0000 (18:22 +0000)]
hwmon: Add "label" attribute
If a label is defined in the device tree for this device add that
to the device specific attributes. This is useful for userspace to
be able to identify an individual device when multiple identical
chips are present in the system.
Zev Weiss [Thu, 13 Jan 2022 16:46:29 +0000 (08:46 -0800)]
hwmon: (nct6775) add support for TSI temperature registers
These registers report CPU temperatures (and, depending on the system,
sometimes chipset temperatures) via the TSI interface on AMD systems.
They're distinct from most of the other Super-IO temperature readings
(CPUTIN, SYSTIN, etc.) in that they're not a selectable source for
monitoring and are in a different (higher resolution) format, but can
still provide useful temperature data.
Guenter Roeck [Fri, 24 Dec 2021 19:31:32 +0000 (11:31 -0800)]
hwmon: (lm83) Explain why LM82 may be misdetected as LM83
According to the March 2013 revision of the LM82 datasheet, the latest
LM82 die revision is 0x03. This was confirmed and observed with a real
chip. Further details in this revision of the LM82 datasheet suggest that
LM82 is now just a repackaged LM83. Such versions of LM82 will be detected
as LM83. Add comment to the code explaining why this may happen.
Guenter Roeck [Thu, 23 Dec 2021 07:49:59 +0000 (23:49 -0800)]
hwmon: (lm83) Demote log message if chip identification fails
There should be no message in the kernel function if the detect function
fails to identify a chip; this is perfectly normal and does not warrant
a kernel log entry. Demote message to debug.
Guenter Roeck [Thu, 23 Dec 2021 00:22:00 +0000 (16:22 -0800)]
hwmon: (lm83) Use regmap
Using local caching in this driver had few benefits. It used cached values
for two seconds and then re-read all registers from the chip even if the
user only accessed a single attribute. On top of that, alarm attributes
were stale for up to four seconds (the first status register read reports
and clears an alarm, the second reports it cleared). Use regmap instead
for caching. Do not re-read non-volatile registers, and do not cache
volatile registers.
As part of this change, handle register read and write address differences
in regmap code. This is necessary to avoid problems with caching in the
regmap core, and ultimately simplifies the code.
Also, errors observed when reading from and writing to registers are no
longer ignored.
Guenter Roeck [Thu, 23 Dec 2021 00:23:31 +0000 (16:23 -0800)]
hwmon: (lm83) Replace new_client with client
It has no value to name a variable 'new_client' in probe and detect
functions; it is obvious that the client is new. Use 'client' as
variable name instead.
Guenter Roeck [Mon, 10 Jan 2022 22:56:25 +0000 (14:56 -0800)]
hwmon: Report attribute name with udev events
Up to now udev events only report the affected hwmon device if an alert
is reported. This requires userspace to read all attributes if it wants
to know what triggered the event. Provide the attribute name with the
NAME property to help userspace find the attribute causing the event.
Patrick Rudolph [Fri, 25 Feb 2022 16:06:09 +0000 (17:06 +0100)]
hwmon: (pmbus) Add mutex to regulator ops
On PMBUS devices with multiple pages, the regulator ops need to be
protected with the update mutex. This prevents accidentally changing
the page in a separate thread while operating on the PMBUS_OPERATION
register.
Tested on Infineon xdpe11280 while a separate thread polls for sensor
data.
Linus Torvalds [Sun, 27 Feb 2022 21:07:40 +0000 (13:07 -0800)]
Merge tag 'irq-urgent-2022-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single fix for a regression caused by the recent PCI/MSI rework
which resulted in a recursive locking problem in the VMD driver.
The cure is to cache the relevant information upfront instead of
retrieving it at runtime"
* tag 'irq-urgent-2022-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI: vmd: Prevent recursive locking on interrupt allocation
Linus Torvalds [Sun, 27 Feb 2022 20:30:54 +0000 (12:30 -0800)]
Merge tag 'pinctrl-v5-17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix some drive strength and pull-up code in the K210 driver.
- Add the Alder Lake-M ACPI ID so it starts to work properly.
- Use a static name for the StarFive GPIO irq_chip, forestalling an
upcoming fixes series from Marc Zyngier.
- Fix an ages old bug in the Tegra 186 driver where we were indexing at
random into struct and being lucky getting the right member.
* tag 'pinctrl-v5-17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
gpio: tegra186: Fix chip_data type confusion
pinctrl: starfive: Use a static name for the GPIO irq_chip
pinctrl: tigerlake: Revert "Add Alder Lake-M ACPI ID"
pinctrl: k210: Fix bias-pull-up
pinctrl: fix loop in k210_pinconf_get_drive()
Linus Torvalds [Sat, 26 Feb 2022 20:10:17 +0000 (12:10 -0800)]
Merge tag 'trace-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- rtla (Real-Time Linux Analysis tool):
- fix typo in man page
- Update API -e to -E before it is released
- Error message fix and memory leak fix
- Partially uninline trace event soft disable to shrink text
- Fix function graph start up test
- Have triggers affect the trace instance they are in and not top level
- Have osnoise sleep in the units it says it uses
- Remove unused ftrace stub function
- Remove event probe redundant info from event in the buffer
- Fix group ownership setting in tracefs
- Ensure trace buffer is minimum size to prevent crashes
* tag 'trace-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
rtla/osnoise: Fix error message when failing to enable trace instance
rtla/osnoise: Free params at the exit
rtla/hist: Make -E the short version of --entries
tracing: Fix selftest config check for function graph start up test
tracefs: Set the group ownership in apply_options() not parse_options()
tracing/osnoise: Make osnoise_main to sleep for microseconds
ftrace: Remove unused ftrace_startup_enable() stub
tracing: Ensure trace buffer is at least 4096 bytes large
tracing: Uninline trace_trigger_soft_disabled() partly
eprobes: Remove redundant event type information
tracing: Have traceon and traceoff trigger honor the instance
tracing: Dump stacktrace trigger to the corresponding instance
rtla: Fix systme -> system typo on man page
Linus Torvalds [Sat, 26 Feb 2022 19:52:14 +0000 (11:52 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"12 patches.
Subsystems affected by this patch series: MAINTAINERS, mailmap, memfd,
and mm (hugetlb, kasan, hugetlbfs, pagemap, selftests, memcg, and
slab)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
selftests/memfd: clean up mapping in mfd_fail_write
mailmap: update Roman Gushchin's email
MAINTAINERS, SLAB: add Roman as reviewer, git tree
MAINTAINERS: add Shakeel as a memcg co-maintainer
MAINTAINERS: remove Vladimir from memcg maintainers
MAINTAINERS: add Roman as a memcg co-maintainer
selftest/vm: fix map_fixed_noreplace test failure
mm: fix use-after-free bug when mm->mmap is reused after being freed
hugetlbfs: fix a truncation issue in hugepages parameter
kasan: test: prevent cache merging in kmem_cache_double_destroy
mm/hugetlb: fix kernel crash with hugetlb mremap
MAINTAINERS: add sysctl-next git tree
Linus Torvalds [Sat, 26 Feb 2022 17:53:19 +0000 (09:53 -0800)]
Merge tag 'xfs-5.17-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"Nothing exciting, just more fixes for not returning sync_filesystem
error values (and eliding it when it's not necessary).
Summary:
- Only call sync_filesystem when we're remounting the filesystem
readonly readonly, and actually check its return value"
* tag 'xfs-5.17-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: only bother with sync_filesystem during readonly remount
Mike Kravetz [Sat, 26 Feb 2022 03:11:26 +0000 (19:11 -0800)]
selftests/memfd: clean up mapping in mfd_fail_write
Running the memfd script ./run_hugetlbfs_test.sh will often end in error
as follows:
memfd-hugetlb: CREATE
memfd-hugetlb: BASIC
memfd-hugetlb: SEAL-WRITE
memfd-hugetlb: SEAL-FUTURE-WRITE
memfd-hugetlb: SEAL-SHRINK
fallocate(ALLOC) failed: No space left on device
./run_hugetlbfs_test.sh: line 60: 166855 Aborted (core dumped) ./memfd_test hugetlbfs
opening: ./mnt/memfd
fuse: DONE
If no hugetlb pages have been preallocated, run_hugetlbfs_test.sh will
allocate 'just enough' pages to run the test. In the SEAL-FUTURE-WRITE
test the mfd_fail_write routine maps the file, but does not unmap. As a
result, two hugetlb pages remain reserved for the mapping. When the
fallocate call in the SEAL-SHRINK test attempts allocate all hugetlb
pages, it is short by the two reserved pages.
Fix by making sure to unmap in mfd_fail_write.
Link: https://lkml.kernel.org/r/20220219004340.56478-1-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlastimil Babka [Sat, 26 Feb 2022 03:11:20 +0000 (19:11 -0800)]
MAINTAINERS, SLAB: add Roman as reviewer, git tree
The slab code has an overlap with kmem accounting, where Roman has done
a lot of work recently and it would be useful to make sure he's CC'd on
patches that potentially affect it. Thus add him as a reviewer for the
SLAB subsystem.
Also while at it, add the link to slab git tree.
Link: https://lkml.kernel.org/r/20220222103104.13241-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roman Gushchin [Sat, 26 Feb 2022 03:11:11 +0000 (19:11 -0800)]
MAINTAINERS: add Roman as a memcg co-maintainer
Add myself as a memcg co-maintainer. My primary focus over last few
years was the kernel memory accounting stack, but I do work on some
other parts of the memory controller as well.
Link: https://lkml.kernel.org/r/20220221233951.659048-1-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Suren Baghdasaryan [Sat, 26 Feb 2022 03:11:05 +0000 (19:11 -0800)]
mm: fix use-after-free bug when mm->mmap is reused after being freed
oom reaping (__oom_reap_task_mm) relies on a 2 way synchronization with
exit_mmap. First it relies on the mmap_lock to exclude from unlock
path[1], page tables tear down (free_pgtables) and vma destruction.
This alone is not sufficient because mm->mmap is never reset.
For historical reasons[2] the lock is taken there is also MMF_OOM_SKIP
set for oom victims before.
The oom reaper only ever looks at oom victims so the whole scheme works
properly but process_mrelease can opearate on any task (with fatal
signals pending) which doesn't really imply oom victims. That means
that the MMF_OOM_SKIP part of the synchronization doesn't work and it
can see a task after the whole address space has been demolished and
traverse an already released mm->mmap list. This leads to use after
free as properly caught up by KASAN report.
Fix the issue by reseting mm->mmap so that MMF_OOM_SKIP synchronization
is not needed anymore. The MMF_OOM_SKIP is not removed from exit_mmap
yet but it acts mostly as an optimization now.
[1] 27ae357fa82b ("mm, oom: fix concurrent munlock and oom reaper unmap, v3")
[2] 212925802454 ("mm: oom: let oom_reap_task and exit_mmap run concurrently")
[mhocko@suse.com: changelog rewrite]
Link: https://lore.kernel.org/all/00000000000072ef2c05d7f81950@google.com/ Link: https://lkml.kernel.org/r/20220215201922.1908156-1-surenb@google.com Fixes: 64591e8605d6 ("mm: protect free_pgtables with mmap_lock write lock in exit_mmap") Signed-off-by: Suren Baghdasaryan <surenb@google.com> Reported-by: syzbot+2ccf63a4bd07cf39cab0@syzkaller.appspotmail.com Suggested-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Rik van Riel <riel@surriel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: David Rientjes <rientjes@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Rik van Riel <riel@surriel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Jan Engelhardt <jengelh@inai.de> Cc: Tim Murray <timmurray@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
and kernel will allocate 5 hugepages for node 1 instead of ignoring it.
I move the validation check earlier to fix this issue, and slightly
simplifies the condition here.
Link: https://lkml.kernel.org/r/20220209134018.8242-1-liuyuntao10@huawei.com Fixes: b5389086ad7be0 ("hugetlbfs: extend the definition of hugepages parameter to support node allocation") Signed-off-by: Liu Yuntao <liuyuntao10@huawei.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Konovalov [Sat, 26 Feb 2022 03:10:59 +0000 (19:10 -0800)]
kasan: test: prevent cache merging in kmem_cache_double_destroy
With HW_TAGS KASAN and kasan.stacktrace=off, the cache created in the
kmem_cache_double_destroy() test might get merged with an existing one.
Thus, the first kmem_cache_destroy() call won't actually destroy it but
will only decrease the refcount. This causes the test to fail.
Provide an empty constructor for the created cache to prevent the cache
from getting merged.
Link: https://lkml.kernel.org/r/b597bd434c49591d8af00ee3993a42c609dc9a59.1644346040.git.andreyknvl@google.com Fixes: f98f966cd750 ("kasan: test: add test case for double-kmem_cache_destroy()") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kernel BUG at include/linux/mm.h:2373!
cpu 0x5d: Vector: 700 (Program Check) at [c00000003c6e76e0]
pc: c000000000581a54: pmd_to_page+0x54/0x80
lr: c00000000058d184: move_hugetlb_page_tables+0x4e4/0x5b0
sp: c00000003c6e7980
msr: 9000000000029033
current = 0xc00000003bd8d980
paca = 0xc000200fff610100 irqmask: 0x03 irq_happened: 0x01
pid = 9349, comm = hugepage-mremap
kernel BUG at include/linux/mm.h:2373!
move_hugetlb_page_tables+0x4e4/0x5b0 (link register)
move_hugetlb_page_tables+0x22c/0x5b0 (unreliable)
move_page_tables+0xdbc/0x1010
move_vma+0x254/0x5f0
sys_mremap+0x7c0/0x900
system_call_exception+0x160/0x2c0
the kernel can't use huge_pte_offset before it set the pte entry because
a page table lookup check for huge PTE bit in the page table to
differentiate between a huge pte entry and a pointer to pte page. A
huge_pte_alloc won't mark the page table entry huge and hence kernel
should not use huge_pte_offset after a huge_pte_alloc.
Link: https://lkml.kernel.org/r/20220211063221.99293-1-aneesh.kumar@linux.ibm.com Fixes: 550a7d60bd5e ("mm, hugepages: add mremap() support for hugepage backed vma") Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Mina Almasry <almasrymina@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Luis Chamberlain [Sat, 26 Feb 2022 03:10:53 +0000 (19:10 -0800)]
MAINTAINERS: add sysctl-next git tree
Add a git tree for sysctls as there's been quite a bit of work lately to
remove all the syctls out of kernel/sysctl.c and move to their respective
places, so coordination has been needed to avoid conflicts. This tree
will also help soak these changes on linux-next prior to getting to Linus.
Link: https://lkml.kernel.org/r/20220218182736.3694508-1-mcgrof@kernel.org Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Bristot de Oliveira [Fri, 18 Feb 2022 17:57:07 +0000 (18:57 +0100)]
rtla/hist: Make -E the short version of --entries
Currently, --entries uses -e as the short version in the hist mode of
timerlat and osnoise tools. But as -e is already used to enable events
on trace sessions by other tools, thus let's keep it available for the
same usage for all rtla tools.
Make -E the short version of --entries for hist mode on all tools.
Note: rtla was merged in this merge window, so rtla was not released yet.
Steven Rostedt (Google) [Fri, 25 Feb 2022 20:34:26 +0000 (15:34 -0500)]
tracefs: Set the group ownership in apply_options() not parse_options()
Al Viro brought it to my attention that the dentries may not be filled
when the parse_options() is called, causing the call to set_gid() to
possibly crash. It should only be called if parse_options() succeeds
totally anyway.
He suggested the logical place to do the update is in apply_options().
Linus Torvalds [Fri, 25 Feb 2022 22:08:03 +0000 (14:08 -0800)]
Merge tag 'for-5.17-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"This is a hopefully last batch of fixes for defrag that got broken in
5.16, all stable material.
The remaining reported problem is excessive IO with autodefrag due to
various conditions in the defrag code not met or missing"
* tag 'for-5.17-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: reduce extent threshold for autodefrag
btrfs: autodefrag: only scan one inode once
btrfs: defrag: don't use merged extent map for their generation check
btrfs: defrag: bring back the old file extent search behavior
btrfs: defrag: remove an ambiguous condition for rejection
btrfs: defrag: don't defrag extents which are already at max capacity
btrfs: defrag: don't try to merge regular extents with preallocated extents
btrfs: defrag: allow defrag_one_cluster() to skip large extent which is not a target
btrfs: prevent copying too big compressed lzo segment
Linus Torvalds [Fri, 25 Feb 2022 21:34:30 +0000 (13:34 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
- Older "does not even boot" regression in qib from July
- Bug fixes for error unwind in rtrs
- Avoid a deadlock syzkaller found in srp
- Fix another UAF syzkaller found in cma
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/cma: Do not change route.addr.src_addr outside state checks
RDMA/ib_srp: Fix a deadlock
RDMA/rtrs-clt: Move free_permit from free_clt to rtrs_clt_close
RDMA/rtrs-clt: Fix possible double free in error case
IB/qib: Fix duplicate sysfs directory name
Linus Torvalds [Fri, 25 Feb 2022 20:56:11 +0000 (12:56 -0800)]
Merge tag 'gpio-fixes-for-v5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix an bug generating spurious interrupts in gpio-rockchip
- fix a race condition in gpiod_to_irq() called by GPIO consumers
* tag 'gpio-fixes-for-v5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: Return EPROBE_DEFER if gc->to_irq is NULL
gpio: rockchip: Reset int_bothedge when changing trigger
Jason Gunthorpe [Wed, 23 Feb 2022 15:23:57 +0000 (11:23 -0400)]
RDMA/cma: Do not change route.addr.src_addr outside state checks
If the state is not idle then resolve_prepare_src() should immediately
fail and no change to global state should happen. However, it
unconditionally overwrites the src_addr trying to build a temporary any
address.
For instance if the state is already RDMA_CM_LISTEN then this will corrupt
the src_addr and would cause the test in cma_cancel_operation():
if (cma_any_addr(cma_src_addr(id_priv)) && !id_priv->cma_dev)
Which would manifest as this trace from syzkaller:
BUG: KASAN: use-after-free in __list_add_valid+0x93/0xa0 lib/list_debug.c:26
Read of size 8 at addr ffff8881546491e0 by task syz-executor.1/32204
This is indicating that an rdma_id_private was destroyed without doing
cma_cancel_listens().
Instead of trying to re-use the src_addr memory to indirectly create an
any address derived from the dst build one explicitly on the stack and
bind to that as any other normal flow would do. rdma_bind_addr() will copy
it over the src_addr once it knows the state is valid.
This is similar to commit bc0bdc5afaa7 ("RDMA/cma: Do not change
route.addr.src_addr.ss_family")
Link: https://lore.kernel.org/r/0-v2-e975c8fd9ef2+11e-syz_cma_srcaddr_jgg@nvidia.com Cc: stable@vger.kernel.org Fixes: 732d41c545bb ("RDMA/cma: Make the locking for automatic state transition more clear") Reported-by: syzbot+c94a3675a626f6333d74@syzkaller.appspotmail.com Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Linus Torvalds [Fri, 25 Feb 2022 20:37:41 +0000 (12:37 -0800)]
Merge tag 'spi-fix-v5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small driver specific fixes"
* tag 'spi-fix-v5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: rockchip: terminate dma transmission when slave abort
spi: rockchip: Fix error in getting num-cs property
spi: spi-zynq-qspi: Fix a NULL pointer dereference in zynq_qspi_exec_mem_op()
Linus Torvalds [Fri, 25 Feb 2022 20:33:51 +0000 (12:33 -0800)]
Merge tag 'regulator-fix-v5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A series of fixes for the da9121 driver"
* tag 'regulator-fix-v5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: da9121: Remove surplus DA9141 parameters
regulator: da9121: Fix DA914x voltage value
regulator: da9121: Fix DA914x current values
Linus Torvalds [Fri, 25 Feb 2022 20:30:01 +0000 (12:30 -0800)]
Merge tag 'regmap-fix-v5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"A fix for interrupt controllers which require the explicit
acknowledgement of interrupts using a different register to the one
where interrupts are reported.
Urgent for the few devices this affects"
* tag 'regmap-fix-v5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap-irq: Update interrupt clear register for proper reset
projects / users / hch / dma-mapping.git / log