* remotes/sstabellini/tags/xen-20170421-v2-tag: (21 commits)
move xen-mapcache.c to hw/i386/xen/
move xen-hvm.c to hw/i386/xen/
move xen-common.c to hw/xen/
add xen-9p-backend to MAINTAINERS under Xen
xen/9pfs: build and register Xen 9pfs backend
xen/9pfs: send responses back to the frontend
xen/9pfs: implement in/out_iov_from_pdu and vmarshal/vunmarshal
xen/9pfs: receive requests from the frontend
xen/9pfs: connect to the frontend
xen/9pfs: introduce Xen 9pfs backend
9p: introduce a type for the 9p header
xen: import ring.h from xen
configure: use pkg-config for obtaining xen version
xen: additionally restrict xenforeignmemory operations
xen: use libxendevice model to restrict operations
xen: use 5 digit xen versions
xen: use libxendevicemodel when available
configure: detect presence of libxendevicemodel
xen: create wrappers for all other uses of xc_hvm_XXX() functions
xen: rename xen_modified_memory() to xen_hvm_modified_memory()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Stefano Stabellini [Wed, 22 Mar 2017 17:16:09 +0000 (10:16 -0700)]
xen/9pfs: send responses back to the frontend
Once a request is completed, xen_9pfs_push_and_notify gets called. In
xen_9pfs_push_and_notify, update the indexes (data has already been
copied to the sg by the common code) and send a notification to the
frontend.
Schedule the bottom-half to check if we already have any other requests
pending.
Stefano Stabellini [Wed, 22 Mar 2017 17:16:03 +0000 (10:16 -0700)]
xen/9pfs: receive requests from the frontend
Upon receiving an event channel notification from the frontend, schedule
the bottom half. From the bottom half, read one request from the ring,
create a pdu and call pdu_submit to handle it.
For now, only handle one request per ring at a time.
Peter Maydell [Tue, 25 Apr 2017 13:14:17 +0000 (14:14 +0100)]
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Tue 25 Apr 2017 12:22:03 BST
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
COLO-compare: Optimize tcp compare trace event
COLO-compare: Optimize tcp compare for option field
slirp: add a fake NC-SI backend
aspeed: add a FTGMAC100 nic
net/ftgmac100: add a 'aspeed' property
net: add FTGMAC100 support
hw/net: add MII definitions
colo-compare: Fix old packet check bug.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philipp Kern [Tue, 18 Aug 2015 11:50:55 +0000 (13:50 +0200)]
target-s390x: Mask the SIGP order_code to 8bit.
According to "CPU Signaling and Response", "Signal-Processor Orders",
the order field is bit position 56-63. Without this, the Linux
guest kernel is sometimes unable to stop emulation and enters
an infinite loop of "XXX unknown sigp: 0xffffffff00000005".
Signed-off-by: Philipp Kern <phil@philkern.de> Reviewed-by: Thomas Huth <thuth@tuxfamily.org>
[agraf: add comment according to email] Signed-off-by: Alexander Graf <agraf@suse.de>
macOS 10.12 deprecated/replaced many AppKit constants to make naming
more consistent. Use the new constants, and #define them to the
old constants when compiling against a pre-10.12 SDK.
Signed-off-by: Brendan Shanks <brendan@bslabs.net>
Message-id: 20170425062952.99149-1-brendan@bslabs.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
COLO-compare: Optimize tcp compare for option field
In this patch we support packet that have tcp options field.
Add tcp options field check, If the packet have options
field we just skip it and compare tcp payload,
Avoid unnecessary checkpoint, optimize performance.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
NC-SI (Network Controller Sideband Interface) enables a BMC to manage
a set of NICs on a system. This model takes the simplest approach and
reverses the NC-SI packets to pretend a NIC is present and exercise
the Linux driver.
The NCSI header file <ncsi-pkt.h> comes from mainline Linux and was
untabified.
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
There is a second NIC but we do not use it for the moment. We use the
'aspeed' property to tune the definition of the end of ring buffer bit
for the Aspeed SoCs.
Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
Krzysztof Kozlowski [Sat, 22 Apr 2017 19:07:09 +0000 (21:07 +0200)]
hw/arm/exynos: Add generic SDHCI devices
Exynos4210 has four SD/MMC controllers supporting:
- SD Standard Host Specification Version 2.0,
- MMC Specification Version 4.3,
- SDIO Card Specification Version 2.0,
- DMA and ADMA.
Add emulation of SDHCI devices which allows accessing storage through SD
cards. Differences from real hardware:
- Devices are shipped with eMMC memory, not SD card.
- The Exynos4210 SDHCI has few more registers, e.g. for
controlling the clocks, additional status (0x80, 0x84, 0x8c). These
are not implemented.
Testing on smdkc210 machine with "-drive file=FILE,if=sd,bus=0,index=2".
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Message-id: 20170422190709.8676-1-krzk@kernel.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/cody/tags/block-pull-request:
qemu-iotests: _cleanup_qemu must be called on exit
block/rbd: Add support for reopen()
block/rbd - update variable names to more apt names
block: use bdrv_can_set_read_only() during reopen
block: introduce bdrv_can_set_read_only()
block: code movement
block: honor BDRV_O_ALLOW_RDWR when clearing bs->read_only
block: do not set BDS read_only if copy_on_read enabled
block: add bdrv_set_read_only() helper function
qemu-iotests: exclude vxhs from image creation via protocol
block/vxhs.c: Add qemu-iotests for new block device type "vxhs"
block/vxhs.c: Add support for a new block device type called "vxhs"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Jeff Cody [Tue, 18 Apr 2017 19:42:41 +0000 (15:42 -0400)]
qemu-iotests: _cleanup_qemu must be called on exit
For the tests that use the common.qemu functions for running a QEMU
process, _cleanup_qemu must be called in the exit function.
If it is not, if the qemu process aborts, then not all of the droppings
are cleaned up (e.g. pidfile, fifos).
This updates those tests that did not have a cleanup in qemu-iotests.
(I swapped spaces for tabs in test 102 as well)
Reported-by: Eric Blake <eblake@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: d59c2f6ad6c1da8b9b3c7f357c94a7122ccfc55a.1492544096.git.jcody@redhat.com
Jeff Cody [Fri, 7 Apr 2017 20:55:32 +0000 (16:55 -0400)]
block/rbd: Add support for reopen()
This adds support for reopen in rbd, for changing between r/w and r/o.
Note, that this is only a flag change, but we will block a change from
r/o to r/w if we are using an RBD internal snapshot.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: d4e87539167ec6527d44c97b164eabcccf96e4f3.1491597120.git.jcody@redhat.com
Jeff Cody [Fri, 7 Apr 2017 20:55:31 +0000 (16:55 -0400)]
block/rbd - update variable names to more apt names
Update 'clientname' to be 'user', which tracks better with both
the QAPI and rados variable naming.
Update 'name' to be 'image_name', as it indicates the rbd image.
Naming it 'image' would have been ideal, but we are using that for
the rados_image_t value returned by rbd_open().
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: b7ec1fb2e1cf36f9b6911631447a5b0422590b7d.1491597120.git.jcody@redhat.com
Jeff Cody [Fri, 7 Apr 2017 20:55:30 +0000 (16:55 -0400)]
block: use bdrv_can_set_read_only() during reopen
Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 00aed7ffdd7be4b9ed9ce1007d50028a72b34ebe.1491597120.git.jcody@redhat.com
Jeff Cody [Fri, 7 Apr 2017 20:55:29 +0000 (16:55 -0400)]
block: introduce bdrv_can_set_read_only()
Introduce check function for setting read_only flags. Will return < 0 on
error, with appropriate Error value set. Does not alter any flags.
Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: e2bba34ac3bc76a0c42adc390413f358ae0566e8.1491597120.git.jcody@redhat.com
Jeff Cody [Fri, 7 Apr 2017 20:55:28 +0000 (16:55 -0400)]
block: code movement
Move bdrv_is_read_only() up with its friends.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 73b2399459760c32506f9407efb9dddb3a2789de.1491597120.git.jcody@redhat.com
Jeff Cody [Fri, 7 Apr 2017 20:55:27 +0000 (16:55 -0400)]
block: honor BDRV_O_ALLOW_RDWR when clearing bs->read_only
The BDRV_O_ALLOW_RDWR flag allows / prohibits the changing of
the BDS 'read_only' state, but there are a few places where it
is ignored. In the bdrv_set_read_only() helper, make sure to
honor the flag.
Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: be2e5fb2d285cbece2b6d06bed54a6f56520d251.1491597120.git.jcody@redhat.com
Jeff Cody [Fri, 7 Apr 2017 20:55:26 +0000 (16:55 -0400)]
block: do not set BDS read_only if copy_on_read enabled
A few block drivers will set the BDS read_only flag from their
.bdrv_open() function. This means the bs->read_only flag could
be set after we enable copy_on_read, as the BDRV_O_COPY_ON_READ
flag check occurs prior to the call to bdrv->bdrv_open().
This adds an error return to bdrv_set_read_only(), and an error will be
return if we try to set the BDS to read_only while copy_on_read is
enabled.
This patch also changes the behavior of vvfat. Before, vvfat could
override the drive 'readonly' flag with its own, internal 'rw' flag.
For instance, this -drive parameter would result in a writable image:
This is not correct. Now, attempting to use the above -drive parameter
will result in an error (i.e., 'rw' is incompatible with 'readonly=on').
Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 0c5b4c1cc2c651471b131f21376dfd5ea24d2196.1491597120.git.jcody@redhat.com
Jeff Cody [Fri, 7 Apr 2017 20:55:25 +0000 (16:55 -0400)]
block: add bdrv_set_read_only() helper function
We have a helper wrapper for checking for the BDS read_only flag,
add a helper wrapper to set the read_only flag as well.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 9b18972d05f5fa2ac16c014f0af98d680553048d.1491597120.git.jcody@redhat.com
* remotes/armbru/tags/pull-error-2017-04-24:
error: Apply error_propagate_null.cocci again
qga: Make errp the last parameter of qga_vss_fsfreeze
migration: Make errp the last parameter of local functions
scsi: Make errp the last parameter of virtio_scsi_common_realize
fdc: Make errp the last parameter of fdctrl_connect_drives
nfs: Make errp the last parameter of nfs_client_open
block: Make errp the last parameter of commit_active_start
mirror: Make errp the last parameter of mirror_start_job
crypto: Make errp the last parameter of functions
block: Make errp the last parameter of bdrv_img_create
socket: Make errp the last parameter of vsock_connect_saddr
socket: Make errp the last parameter of unix_connect_saddr
socket: Make errp the last parameter of inet_connect_saddr
socket: Make errp the last parameter of socket_connect
util/error: Fix leak in error_vprepend()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ppc: Add SM501 device in ppc softmmu targets default configs
This is not used by default on any emulated machine yet but it is
still useful to have it compiled so it can be added from the command
line for clients that can use it (e.g. MorphOS has no driver for any
other emulated video cards but can output via SM501)
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Acked-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: bf305f36dcde152668cf12438ef983cd09ed2d3f.1492787889.git.balaton@eik.bme.hu Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is to allow clients to initialise these without failing as long
as no 2D engine function is called that would use the written value.
Saved values are not used yet (may get used when more of 2D engine is
added sometimes) and clients normally only write to most of these
registers, nothing is known to ever read them but they are documented
as read/write so also implement read for these.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 80adf8e4d084ec6cc30d149f8e8215debb67314a.1492787889.git.balaton@eik.bme.hu Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rework HWC handling to simplify it and fix cursor not updating on
screen as needed. Previously cursor was not updated because checking
for changes in a line overrode the update flag set for the cursor but
fixing this is not enough because the cursor should also be updated if
its shape or location changes. Introduce hwc_invalidate() function to
handle that similar to other display controller models.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 6970a5e9868b7246656c1d02038dc5d5fa369507.1492787889.git.balaton@eik.bme.hu Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We only emulate the sysbus device in its default LE mode and PCI is LE
as well so specify this for registers and framebuffer memory.
Note that though the Linux kernel driver has code which claims to
handle both big and little endian, it is obviously bogus for 16 bit
and cannot be trusted as a source of information on the framebuffer
pixel format. This is our best guess about device behaviour based on
the specs and testing with MorphOS that is known to work on real HW.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 8b9605a569f8bf54074e15903620b18cd9967c89.1492787889.git.balaton@eik.bme.hu Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do not use the base address to access data in local memory. This is in
preparation to allow chip connected via PCI where base address depends
on where the BAR is mapped so it will be unknown.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 79dab21bc6ec4d563aabf265c3bab40e2e95aae8.1492787889.git.balaton@eik.bme.hu Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adding vmstate saving is not in this patch because the state structure
will be changed in further patches, then another patch will add
vmstate descriptor after those changes.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: a32b7fc981a20205f96d530d8e958f12ace1104c.1492787889.git.balaton@eik.bme.hu Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 24 Apr 2017 08:43:03 +0000 (09:43 +0100)]
Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-signed' into staging
qemu-sparc update
# gpg: Signature made Fri 21 Apr 2017 20:09:35 BST
# gpg: using RSA key 0x5BC2C56FAE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* remotes/mcayland/tags/qemu-sparc-signed:
tcx: switch to load_image_mr() and remove prom_addr hack
tcx: use tcx_set_dirty() for accelerated ops
tcx: remove primitives for non-32-bit surfaces
tcx: remove TARGET_PAGE_SIZE from tcx24_update_display()
tcx: remove TARGET_PAGE_SIZE from tcx_update_display()
tcx: remove page24 and cpage from tcx24_update_display()
tcx: alter tcx24_reset_dirty() to accept address and length parameters
tcx: alter tcx24_check_dirty() to accept address and length parameters
tcx: ensure tcx_set_dirty() also invalidates the 24-bit plane and cplane
tcx: alter tcx_set_dirty() to accept address and length parameters
cg3: switch to load_image_mr() and remove prom-addr hack
cg3: fix up size parameter for memory_region_get_dirty()
cg3: remove TARGET_PAGE_SIZE rounding on dirty page detection
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix standard vga mode check: Both s->config and s->enabled must be set
to enable vmware command fifo processing.
Drop dirty tracking code from the fifo rendering code path, it isn't
used anyway because vmsvga turns off dirty tracking when leaving
standard vga mode.
The vga code clears the dirty bits *after* reading the framebuffer
memory. So if the guest framebuffer updates hits the race window
between vga reading the framebuffer and vga clearing the dirty bits
vga will miss that update
Fix it by using the new memory_region_copy_and_clear_dirty()
memory_region_copy_get_dirty() functions. That way we clear the
dirty bitmap before reading the framebuffer. Any guest display
updates happening in parallel will be properly tracked in the
dirty bitmap then and the next display refresh will pick them up.
Problem triggers with mttcg only. Before mttcg was merged tcg
never ran in parallel to vga emulation. Using kvm will hide the
problem too, due to qemu operating on a userspace copy of the
kernel's dirty bitmap.
Add vga_scanline_invalidated helper to check whenever a scanline was
invalidated. Add a sanity check to fix OOB read access for display
heights larger than 2048.
Only cirrus uses this, for hardware cursor rendering, so having this
work properly for the first 2048 scanlines only shouldn't be a problem
as the cirrus can't handle large resolutions anyway. Also changing the
invalidated_y_table size would break live migration.
memory: add support getting and using a dirty bitmap copy.
This patch adds support for getting and using a local copy of the dirty
bitmap.
memory_region_snapshot_and_clear_dirty() will create a snapshot of the
dirty bitmap for the specified range, clear the dirty bitmap and return
the copy. The returned bitmap can be a bit larger than requested, the
range is expanded so the code can copy unsigned longs from the bitmap
and avoid atomic bit update operations.
memory_region_snapshot_get_dirty() will return the dirty status of
pages, pretty much like memory_region_get_dirty(), but using the copy
returned by memory_region_copy_and_clear_dirty().
Max Reitz [Thu, 13 Apr 2017 16:09:52 +0000 (18:09 +0200)]
util/error: Fix leak in error_vprepend()
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20170413160952.29918-1-mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
The FTGMAC100 device is an Ethernet controller with DMA function that
can be found on Aspeed SoCs (which include NCSI).
It is fully compliant with IEEE 802.3 specification for 10/100 Mbps
Ethernet and IEEE 802.3z specification for 1000 Mbps Ethernet and
includes Reduced Media Independent Interface (RMII) and Reduced
Gigabit Media Independent Interface (RGMII) interfaces. It adopts an
AHB bus interface and integrates a link list DMA engine with direct
M-Bus accesses for transmitting and receiving packets. It has
independent TX/RX fifos, supports half and full duplex (1000 Mbps mode
only supports full duplex), flow control for full duplex and
backpressure for half duplex.
The FTGMAC100 also implements IP, TCP, UDP checksum offloads and
supports IEEE 802.1Q VLAN tag insertion and removal. It offers
high-priority transmit queue for QoS and CoS applications
This model is backed with a RealTek 8211E PHY which is the chip found
on the AST2500 EVB. It is complete enough to satisfy two different
Linux drivers and a U-Boot driver. Not supported features are :
This adds comments on the Basic mode control and status registers bit
definitions. It also adds a couple of bits for 1000BASE-T and the
RealTek 8211E PHY for the FTGMAC100 model to use.
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
Stefano Stabellini [Tue, 21 Mar 2017 20:51:25 +0000 (13:51 -0700)]
xen: import ring.h from xen
Do not use the ring.h header installed on the system. Instead, import
the header into the QEMU codebase. This avoids problems when QEMU is
built against a Xen version too old to provide all the ring macros.
Juergen Gross [Mon, 27 Mar 2017 07:42:45 +0000 (09:42 +0200)]
configure: use pkg-config for obtaining xen version
Instead of trying to guess the Xen version to use by compiling various
test programs first just ask the system via pkg-config. Only if it
can't return the version fall back to the test program scheme.
If configure is being called with dedicated flags for the Xen libraries
use those instead of the pkg-config output. This will avoid breaking
an in-tree Xen build of an old Xen version while a new Xen version is
installed on the build machine: pkg-config would pick up the installed
Xen config files as the Xen tree wouldn't contain any of them.
Commit f0f272baf3a7 "xen: use libxendevice model to restrict operations"
added a command-line option (-xen-domid-restrict) to limit operations
using the libxendevicemodel API to a specified domid. The commit also
noted that the restriction would be extended to cover operations issued
via other xen libraries by subsequent patches.
My recent Xen patch [1] added a call to the xenforeignmemory API to allow
it to be restricted. This patch now makes use of that new call when the
-xen-domid-restrict option is passed.
Paul Durrant [Wed, 22 Mar 2017 09:39:15 +0000 (09:39 +0000)]
xen: use libxendevice model to restrict operations
This patch adds a command-line option (-xen-domid-restrict) which will
use the new libxendevicemodel API to restrict devicemodel [1] operations
to the specified domid. (Such operations are not applicable to the xenpv
machine type).
This patch also adds a tracepoint to allow successful enabling of the
restriction to be monitored.
[1] I.e. operations issued by libxendevicemodel. Operation issued by other
xen libraries (e.g. libxenforeignmemory) are currently still unrestricted
but this will be rectified by subsequent patches.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Juergen Gross [Thu, 16 Mar 2017 14:19:52 +0000 (15:19 +0100)]
xen: use 5 digit xen versions
Today qemu is using e.g. the value 480 for Xen version 4.8.0. As some
Xen version tests are using ">" relations this scheme will lead to
problems when Xen version 4.10.0 is being reached.
Instead of the 3 digit schem use a 5 digit scheme (e.g. 40800 for
version 4.8.0).
Paul Durrant [Tue, 7 Mar 2017 10:55:34 +0000 (10:55 +0000)]
xen: use libxendevicemodel when available
This patch modifies the wrapper functions in xen_common.h to use the
new xendevicemodel interface if it is available along with compatibility
code to use the old libxenctrl interface if it is not.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Anthony Perard <anthony.perard@citrix.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Paul Durrant [Tue, 7 Mar 2017 10:55:33 +0000 (10:55 +0000)]
configure: detect presence of libxendevicemodel
This patch adds code in configure to set CONFIG_XEN_CTRL_INTERFACE_VERSION
to a new value of 490 if libxendevicemodel is present in the build
environment.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Anthony Perard <anthony.perard@citrix.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
* remotes/juanquintela/tags/migration/20170421: (65 commits)
hmp: info migrate_parameters format tunes
hmp: info migrate_capability format tunes
migration: rename max_size to threshold_size
migration: set current_active_state once
virtio-rng: stop virtqueue while the CPU is stopped
migration: don't close a file descriptor while it can be in use
ram: Remove migration_bitmap_extend()
migration: Disable hotplug/unplug during migration
qdev: Move qdev_unplug() to qdev-monitor.c
qdev: Export qdev_hot_removed
qdev: qdev_hotplug is really a bool
migration: Remove MigrationState parameter from migration_is_idle()
ram: Use RAMBitmap type for coherence
ram: rename last_ram_offset() last_ram_pages()
ram: Use ramblock and page offset instead of absolute offset
ram: Change offset field in PageSearchStatus to page
ram: Remember last_page instead of last_offset
ram: Use page number instead of an address for the bitmap operations
ram: reorganize last_sent_block
ram: ram_discard_range() don't use the mis parameter
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/stefanha/tags/tracing-pull-request:
simpletrace: document Analyzer method signatures
trace: Put all trace.o into libqemuutil.a
configure: eliminate Python dependency for --help
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/stefanha/tags/block-pull-request:
MAINTAINERS: update my email address
MAINTAINERS: update Wen's email address
migration/block: use blk_pwrite_zeroes for each zero cluster
throttle: make throttle_config(throttle_get_config()) symmetric
throttle: do not use invalid config in test
qemu-options: explain disk I/O throttling options
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/cohuck/tags/s390x-20170421:
s390x: Drop useless casts
s390x: register I/O adapters per ISC during init
s390x/flic: cache flic in s390_get_flic
s390x: initialize flic before I/O subsystems
s390x: use enum for adapter type and standardize its naming
s390x/css: consolidate the devno property for ccw devices
s390x/css: provide introspection for virtual subchannel and device busid
s390x/css: introduce read-only property type for device ids
s390x/pci: make printf always compile in debug output
s390x/kvm: make printf always compile in debug output
s390x: introduce 2.10 compat machine
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Xu [Sat, 1 Apr 2017 08:18:45 +0000 (16:18 +0800)]
hmp: info migrate_parameters format tunes
Do the same (one per line) to the parameter list.
CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Peter Xu [Sat, 1 Apr 2017 08:18:44 +0000 (16:18 +0800)]
hmp: info migrate_capability format tunes
Dump the info in a single line is hard to read. Do it one per line.
Also, the first "capabilities:" didn't help much. Let's remove it.
CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Peter Xu [Sat, 1 Apr 2017 08:18:43 +0000 (16:18 +0800)]
migration: rename max_size to threshold_size
In migration codes (especially in migration_thread()), max_size is used
in many place for the threshold value that we will start to do the final
flush and jump to the next stage to dump the whole rest things to
destination. However its name is confusing to first readers. Let's
rename it to "threshold_size" when proper and add a comment for it. No
functional change is made.
CC: Juan Quintela <quintela@redhat.com> CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
projects / users / dwmw2 / qemu.git / log