These old functions can be removed now too. Let net_param_nic() print
the full set of network devices directly, and also make it note that a
list more specific to this platform/config will be available by using
'-nic model=help' instead.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Mon, 23 Oct 2023 08:37:45 +0000 (09:37 +0100)]
hw/m68k/q800: use qemu_find_nic_info()
If a corresponding NIC configuration was found, it will have a MAC address
already assigned, so use that. Else, generate and assign a default one.
Using qemu_find_nic_info() is simpler than the alternative of using
qemu_configure_nic_device() and then having to fetch the "mac" property
as a string and convert it.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Mon, 23 Oct 2023 08:37:40 +0000 (09:37 +0100)]
hw/arm/stellaris: use qemu_find_nic_info()
Rather than just using qemu_configure_nic_device(), populate the MAC
address in the system-registers device by peeking at the NICInfo before
it's assigned to the device.
Generate the MAC address early, if there is no matching -nic option.
Otherwise the MAC address wouldn't be generated until net_client_init1()
runs.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Mon, 23 Oct 2023 08:37:36 +0000 (09:37 +0100)]
hw/net/lan9118: use qemu_configure_nic_device()
Some callers instantiate the device unconditionally, others will do so only
if there is a NICInfo to go with it. This appears to be fairly random, but
preseve the existing behaviour for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Mon, 23 Oct 2023 08:37:35 +0000 (09:37 +0100)]
hw/net/smc91c111: use qemu_configure_nic_device()
Some callers instantiate the device unconditionally, others will do so only
if there is a NICInfo to go with it. This appears to be fairly random, but
preserve the existing behaviour for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Mon, 23 Oct 2023 08:37:23 +0000 (09:37 +0100)]
hw/sh4/r2d: use pci_init_nic_devices()
Previously, the first PCI NIC would be assigned to slot 2 even if the
user override the model and made it something other than an rtl8139
which is the default. Everything else would be dynamically assigned.
Now, the first rtl8139 gets slot 2 and everything else is dynamic.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
David Woodhouse [Mon, 23 Oct 2023 08:37:17 +0000 (09:37 +0100)]
hw/ppc/spapr: use qemu_get_nic_info() and pci_init_nic_devices()
Avoid directly referencing nd_table[] by first instantiating any
spapr-vlan devices using a qemu_get_nic_info() loop, then calling
pci_init_nic_devices() to do the rest.
No functional change intended.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Mon, 23 Oct 2023 08:37:14 +0000 (09:37 +0100)]
hw/ppc/prep: use pci_init_nic_devices()
Previously, the first PCI NIC would be placed in PCI slot 3 and the rest
would be dynamically assigned. Even if the user overrode the default NIC
type and made it something other than PCNet.
Now, the first PCNet NIC (that is, anything not explicitly specified
to be anything different) will go to slot 3 even if it isn't the first
NIC specified on the commnd line. And anything else will be dynamically
assigned.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Sat, 21 Oct 2023 20:30:51 +0000 (21:30 +0100)]
hw/mips/malta: use pci_init_nic_devices()
The Malta board setup code would previously place the first NIC into PCI
slot 11 if was a PCNet card, and the rest (including the first if it was
anything other than a PCNet card) would be dynamically assigned.
Now it will place any PCNet NIC into slot 11, and then anything else will
be dynamically assigned.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Sat, 21 Oct 2023 20:26:19 +0000 (21:26 +0100)]
hw/mips/fuloong2e: use pci_init_nic_devices()
The previous behaviour was: *if* the first NIC specified on the command
line was an RTL8139 (or unspecified model) then it gets assigned to PCI
slot 7, which is where the Fuloong board had an RTL8139. All other
devices (including the first, if it was specified a anything other then
an rtl8319) get dynamically assigned on the bus.
The new behaviour is subtly different: If the first NIC was given a
specific model *other* than rtl8139, and a subsequent NIC was not,
then the rtl8139 (or unspecified) NIC will go to slot 7 and the rest
will be dynamically assigned.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Tue, 17 Oct 2023 16:53:58 +0000 (17:53 +0100)]
hw/xen: use qemu_create_nic_bus_devices() to instantiate Xen NICs
When instantiating XenBus itself, for each NIC which is configured with
either the model unspecified, or set to to "xen" or "xen-net-device",
create a corresponding xen-net-device for it.
Now we can revert the previous more hackish version which relied on the
platform code explicitly registering the NICs on its own XenBus, having
returned the BusState* from xen_bus_init() itself.
This also fixes the setup for Xen PV guests, which was previously broken
in various ways and never actually managed to peer with the netdev.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
David Woodhouse [Sun, 22 Oct 2023 08:13:41 +0000 (09:13 +0100)]
net: add qemu_create_nic_bus_devices()
This will instantiate any NICs which live on a given bus type. Each bus
is allowed *one* substitution (for PCI it's virtio → virtio-net-pci, for
Xen it's xen → xen-net-device; no point in overengineering it unless we
actually want more).
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
David Woodhouse [Sat, 21 Oct 2023 22:09:38 +0000 (23:09 +0100)]
net: report list of available models according to platform
By noting the models for which a configuration was requested, we can give
the user an accurate list of which NIC models were actually available on
the platform/configuration that was otherwise chosen.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
Most code which directly accesses nd_table[] and nb_nics uses them for
one of two things. Either "I have created a NIC device and I'd like a
configuration for it", or "I will create a NIC device *if* there is a
configuration for it". With some variants on the theme around whether
they actually *check* if the model specified in the configuration is
the right one.
Provide functions which perform both of those, allowing platforms to
be a little more consistent and as a step towards making nd_table[]
and nb_nics private to the net code.
Also export the qemu_find_nic_info() helper, as some platforms have
special cases they need to handle.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
David Woodhouse [Tue, 17 Oct 2023 20:59:03 +0000 (21:59 +0100)]
net: do not delete nics in net_cleanup()
In net_cleanup() we only need to delete the netdevs, as those may have
state which outlives Qemu when it exits, and thus may actually need to
be cleaned up on exit.
The nics, on the other hand, are owned by the device which created them.
Most devices don't bother to clean up on exit because they don't have
any state which will outlive Qemu... but XenBus devices do need to clean
up their nodes in XenStore, and do have an exit handler to delete them.
When the XenBus exit handler destroys the xen-net-device, it attempts
to delete its nic after net_cleanup() had already done so. And crashes.
Fix this by only deleting netdevs as we walk the list. As the comment
notes, we can't use QTAILQ_FOREACH_SAFE() as each deletion may remove
*multiple* entries, including the "safely" saved 'next' pointer. But
we can store the *previous* entry, since nics are safe.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
Stefan Hajnoczi [Mon, 13 Nov 2023 12:15:43 +0000 (07:15 -0500)]
Merge tag 'pull-request-2023-11-13' of https://gitlab.com/thuth/qemu into staging
* Fix compilation with Clang 17 on s390x hosts
* Two small s390x PCI fixes
* Update MAINTAINERS file with more entries
* Fix NetBSD VM test
* Clean up some bad wordings
* tag 'pull-request-2023-11-13' of https://gitlab.com/thuth/qemu:
hw/audio/es1370: Clean up comment
tests/tsan: Rename the file with the entries that should be ignored
test-resv-mem: Fix CID 1523911
tests/vm/netbsd: Use Python v3.11
MAINTAINERS: Add a general architecture section for x86
MAINTAINERS: Extend the Stellaris section
MAINTAINERS: Add hw/display/sii9022.c to the Versatile Express section
MAINTAINERS: Add hw/input/ads7846.c to the PXA2XX section
MAINTAINERS: Add include/hw/input/pl050.h to the PrimeCell/CMSDK section
s390x/pci: only limit DMA aperture if vfio DMA limit reported
s390x/pci: bypass vfio DMA counting when using cdev
host/include/generic/host/atomic128: Fix compilation problem with Clang 17
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* tag 'pull-qapi-2023-11-13' of https://repo.or.cz/qemu/armbru:
tests/qapi-schema: Tidy up pylint warnings and advice
sphinx/qapidoc: Tidy up pylint warning raise-missing-from
qapi: Fix QAPISchemaEntity.__repr__()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* tag 'pull-shadow-2023-11-13' of https://repo.or.cz/qemu/armbru:
meson: Enable -Wshadow=local
block/snapshot: Fix compiler warning with -Wshadow=local
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Thomas Huth [Thu, 9 Nov 2023 17:47:20 +0000 (18:47 +0100)]
tests/tsan: Rename the file with the entries that should be ignored
Let's use a better file name here.
Message-ID: <20231109174720.375873-1-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
Coverity complains about passing "&expected" to "run_range_inverse_array",
which dereferences null "expected". I guess the problem is that the
compare_ranges() loop dereferences 'e' without testing it. However the
loop condition is based on 'ranges' which is garanteed to have
the same length as 'expected' given the g_assert_cmpint() just
before the loop. So the code looks safe to me.
Nevertheless adding a test on expected before the loop to get rid of the
warning.
Fixes: CID 1523901 Signed-off-by: Eric Auger <eric.auger@redhat.com> Reported-by: Coverity (CID 1523901)
Message-ID: <20231110083654.277345-1-eric.auger@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Then the build system picks Python v3.11, and doesn't find
py-expat because we only installed the 3.10 version:
python determined to be '/usr/pkg/bin/python3.11'
python version: Python 3.11.5
*** Ouch! ***
Python's pyexpat module is not found.
It's normally part of the Python standard library, maybe your distribution packages it separately?
Either install pyexpat, or alleviate the need for it in the first place by installing pip and setuptools for '/usr/pkg/bin/python3.11'.
(Hint: NetBSD's pkgsrc debundles this to e.g. 'py310-expat'.)
ERROR: python venv creation failed
Fix by installing py-expat for v3.11. Remove the v3.10
packages since we aren't using them anymore.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231109150900.91186-1-philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Fri, 29 Sep 2023 13:45:51 +0000 (15:45 +0200)]
MAINTAINERS: Add a general architecture section for x86
It's a little bit weird that the files in target/i386/ which
are not in a subfolder there do not have any associated
maintainer (and thus nobody might be CC:-ed on changes to
these files). We should have a general x86 section for these
files, similar to what we already have for s390x and mips.
Since Paolo is already listed as maintainer for both, the
x86 KVM and TCG CPUs, I'd like to suggest him as maintainer
for the general files, too.
Message-ID: <20230929134551.395438-1-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Fri, 20 Oct 2023 06:09:36 +0000 (08:09 +0200)]
MAINTAINERS: Extend the Stellaris section
This header include/hw/timer/stellaris-gptm.h obviously belongs to the
Stellaris machines, so let's add it to the corresponding section.
And hw/display/ssd0303.c and hw/display/ssd0323.c are only used
by hw/arm/stellaris.c, so add them to the corresponding section
in the MAINTAINERS file, too.
Message-ID: <20231020060936.524988-5-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Fri, 20 Oct 2023 06:09:35 +0000 (08:09 +0200)]
MAINTAINERS: Add hw/display/sii9022.c to the Versatile Express section
This graphics adapter is only used by the Versatile Express machine,
so add it to the corresponding section in MAINTAINERS.
Message-ID: <20231020060936.524988-4-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Fri, 20 Oct 2023 06:09:34 +0000 (08:09 +0200)]
MAINTAINERS: Add hw/input/ads7846.c to the PXA2XX section
The code from hw/input/ads7846.c is only used by hw/arm/spitz.c,
so add this file to the same section where hw/arm/spitz.c is
listed.
Message-ID: <20231020060936.524988-3-thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Fri, 20 Oct 2023 06:09:33 +0000 (08:09 +0200)]
MAINTAINERS: Add include/hw/input/pl050.h to the PrimeCell/CMSDK section
The corresponding pl050.c file is already listed here, so we should
mention the header here, too.
Message-ID: <20231020060936.524988-2-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
Matthew Rosato [Fri, 10 Nov 2023 17:51:08 +0000 (12:51 -0500)]
s390x/pci: only limit DMA aperture if vfio DMA limit reported
If the host kernel lacks vfio DMA limit reporting, do not attempt
to shrink the guest DMA aperture.
Fixes: df202e3ff3 ("s390x/pci: shrink DMA aperture to be bound by vfio DMA limit") Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-ID: <20231110175108.465851-3-mjrosato@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Matthew Rosato [Fri, 10 Nov 2023 17:51:07 +0000 (12:51 -0500)]
s390x/pci: bypass vfio DMA counting when using cdev
The current code assumes that there is always a vfio group, but
that's no longer guaranteed with the iommufd backend when using
cdev. In this case, we don't need to track the vfio dma limit
anyway.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-ID: <20231110175108.465851-2-mjrosato@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Wed, 8 Nov 2023 08:59:54 +0000 (09:59 +0100)]
host/include/generic/host/atomic128: Fix compilation problem with Clang 17
When compiling QEMU with Clang 17 on a s390x, the compilation fails:
In file included from ../accel/tcg/cputlb.c:32:
In file included from /root/qemu/include/exec/helper-proto-common.h:10:
In file included from /root/qemu/include/qemu/atomic128.h:62:
/root/qemu/host/include/generic/host/atomic128-ldst.h:68:15: error:
__sync builtin operation MUST have natural alignment (consider using __
atomic). [-Werror,-Wsync-alignment]
68 | } while (!__sync_bool_compare_and_swap_16(ptr_align, old, new.i));
| ^
In file included from ../accel/tcg/cputlb.c:32:
In file included from /root/qemu/include/exec/helper-proto-common.h:10:
In file included from /root/qemu/include/qemu/atomic128.h:61:
/root/qemu/host/include/generic/host/atomic128-cas.h:36:11: error:
__sync builtin operation MUST have natural alignment (consider using __a
tomic). [-Werror,-Wsync-alignment]
36 | r.i = __sync_val_compare_and_swap_16(ptr_align, c.i, n.i);
| ^
2 errors generated.
It's arguably a bug in Clang since we already use __builtin_assume_aligned()
to tell the compiler that the pointer is properly aligned. But according to
https://github.com/llvm/llvm-project/issues/69146 it seems like the Clang
folks don't see an easy fix on their side and recommend to use a type
declared with __attribute__((aligned(16))) to work around this problem.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1934
Message-ID: <20231108085954.313071-1-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
Markus Armbruster [Wed, 25 Oct 2023 09:29:25 +0000 (11:29 +0200)]
tests/qapi-schema: Tidy up pylint warnings and advice
Pylint warns:
tests/qapi-schema/test-qapi.py:139:13: W1514: Using open without explicitly specifying an encoding (unspecified-encoding)
tests/qapi-schema/test-qapi.py:143:13: W1514: Using open without explicitly specifying an encoding (unspecified-encoding)
Add encoding='utf-8'.
Pylint advises:
tests/qapi-schema/test-qapi.py:143:13: R1732: Consider using 'with' for resource-allocating operations (consider-using-with)
Silence this by returning the value directly.
Pylint advises:
tests/qapi-schema/test-qapi.py:221:4: R1722: Consider using sys.exit() (consider-using-sys-exit)
tests/qapi-schema/test-qapi.py:226:4: R1722: Consider using sys.exit() (consider-using-sys-exit)
Sure, why not.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231025092925.1785934-1-armbru@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
Markus Armbruster [Wed, 25 Oct 2023 09:21:59 +0000 (11:21 +0200)]
sphinx/qapidoc: Tidy up pylint warning raise-missing-from
Pylint advises:
docs/sphinx/qapidoc.py:518:12: W0707: Consider explicitly re-raising using 'raise ExtensionError(str(err)) from err' (raise-missing-from)
>From its manual:
Python's exception chaining shows the traceback of the current
exception, but also of the original exception. When you raise a
new exception after another exception was caught it's likely that
the second exception is a friendly re-wrapping of the first
exception. In such cases `raise from` provides a better link
between the two tracebacks in the final error.
Makes sense, so do it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231025092159.1782638-2-armbru@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
Markus Armbruster [Tue, 24 Oct 2023 10:48:41 +0000 (12:48 +0200)]
qapi: Fix QAPISchemaEntity.__repr__()
I messed it up on merge. It's a debugging aid, so no impact on build.
Fixes: e307a8174bb8 (qapi: provide a friendly string representation of QAPI classes) Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231024104841.1569250-1-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Markus Armbruster [Thu, 26 Oct 2023 05:31:15 +0000 (07:31 +0200)]
meson: Enable -Wshadow=local
Local variables shadowing other local variables or parameters make the
code needlessly hard to understand. Bugs love to hide in such code.
Evidence: commit bbde656263d (migration/rdma: Fix save_page method to
fail on polling error).
Enable -Wshadow=local to prevent such issues. Possible thanks to
recent cleanups. Enabling -Wshadow would prevent more issues, but
we're not yet ready for that.
As usual, the warning is only enabled when the compiler recognizes it.
GCC does, Clang doesn't.
Some shadowed locals remain in bsd-user. Since BSD prefers Clang,
let's not wait for its cleanup.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231026053115.2066744-2-armbru@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
David Hildenbrand [Mon, 23 Oct 2023 11:13:41 +0000 (13:13 +0200)]
virtio-mem: fix division by zero in virtio_mem_activate_memslots_to_plug()
When running with "dynamic-memslots=off", we enter
virtio_mem_activate_memslots_to_plug() to return immediately again
because "vmem->dynamic_memslots == false". However, the compiler might
not optimize out calculating start_idx+end_idx, where we divide by
vmem->memslot_size. In such a configuration, the memslot size is 0 and
we'll get a division by zero:
(qemu) qom-set vmem0 requested-size 3G
(qemu) q35.sh: line 38: 622940 Floating point exception(core dumped)
The same is true for virtio_mem_deactivate_unplugged_memslots(), however
we never really reach that code without a prior
virtio_mem_activate_memslots_to_plug() call.
Let's fix it by simply calling these functions only with
"dynamic-memslots=on".
This was found when using a debug build of QEMU.
Message-ID: <20231023111341.219317-1-david@redhat.com> Reprted-by: Mario Casquero <mcasquer@redhat.com> Fixes: 177f9b1ee464 ("virtio-mem: Expose device memory dynamically via multiple memslots if enabled") Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Tested-by: Mario Casquero <mcasquer@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
Thomas Huth [Mon, 23 Oct 2023 17:50:38 +0000 (19:50 +0200)]
block/snapshot: Fix compiler warning with -Wshadow=local
No need to declare a new variable in the the inner code block
here, we can re-use the "ret" variable that has been declared
at the beginning of the function. With this change, the code
can now be successfully compiled with -Wshadow=local again.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231023175038.111607-1-thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
* tag 'qdev-array-prop' of https://repo.or.cz/qemu/kevin:
qdev: Rework array properties based on list visitor
qdev: Make netdev properties work as list elements
qom: Add object_property_set_default_list()
hw/rx/rx62n: Use qdev_prop_set_array()
hw/arm/xlnx-versal: Use qdev_prop_set_array()
hw/arm/virt: Use qdev_prop_set_array()
hw/arm/vexpress: Use qdev_prop_set_array()
hw/arm/sbsa-ref: Use qdev_prop_set_array()
hw/arm/mps2: Use qdev_prop_set_array()
hw/arm/mps2-tz: Use qdev_prop_set_array()
hw/i386/pc: Use qdev_prop_set_array()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Thu, 9 Nov 2023 17:42:40 +0000 (18:42 +0100)]
qdev: Rework array properties based on list visitor
Until now, array properties are actually implemented with a hack that
uses multiple properties on the QOM level: a static "foo-len" property
and after it is set, dynamically created "foo[i]" properties.
In external interfaces (-device on the command line and device_add in
QMP), this interface was broken by commit f3558b1b ('qdev: Base object
creation on QDict rather than QemuOpts') because QDicts are unordered
and therefore it could happen that QEMU tried to set the indexed
properties before setting the length, which fails and effectively makes
array properties inaccessible. In particular, this affects the 'ports'
property of the 'rocker' device, which used to be configured like this:
This patch reworks the external interface so that instead of using a
separate top-level property for the length and for each element, we use
a single true array property that accepts a list value. In the external
interfaces, this is naturally expressed as a JSON list and makes array
properties accessible again. The new syntax looks like this:
Creating an array property on the command line without using JSON format
is currently not possible. This could be fixed by switching from
QemuOpts to a keyval parser, which however requires consideration of the
compatibility implications.
All internal users of devices with array properties go through
qdev_prop_set_array() at this point, so updating it takes care of all of
them.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1090 Fixes: f3558b1b763683bb877f7dd5b282469cdadc65c3 Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231109174240.72376-12-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 9 Nov 2023 17:42:39 +0000 (18:42 +0100)]
qdev: Make netdev properties work as list elements
The 'name' parameter of QOM setters is primarily used to specify the name
of the currently parsed input element in the visitor interface. For
top-level qdev properties, this is always set and matches 'prop->name'.
However, for list elements it is NULL, because each element of a list
doesn't have a separate name. Passing a non-NULL value runs into
assertion failures in the visitor code.
Therefore, using 'name' in error messages is not right for property
types that are used in lists, because "(null)" (or even a segfault)
isn't very helpful to identify what QEMU is complaining about.
Change netdev properties to use 'prop->name' instead, which will contain
the name of the array property after switching array properties to lists
in the external interface. (This is still not perfect, as it doesn't
identify which element in the list caused the error, but strictly better
than before.)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231109174240.72376-11-kwolf@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 9 Nov 2023 17:42:38 +0000 (18:42 +0100)]
qom: Add object_property_set_default_list()
This function provides a default for properties that are accessed using
the list visitor interface. The default is always an empty list.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20231109174240.72376-10-kwolf@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 9 Nov 2023 17:42:37 +0000 (18:42 +0100)]
hw/rx/rx62n: Use qdev_prop_set_array()
Instead of manually setting "foo-len" and "foo[i]" properties, build a
QList and use the new qdev_prop_set_array() helper to set the whole
array property with a single call.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231109174240.72376-9-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 9 Nov 2023 17:42:36 +0000 (18:42 +0100)]
hw/arm/xlnx-versal: Use qdev_prop_set_array()
Instead of manually setting "foo-len" and "foo[i]" properties, build a
QList and use the new qdev_prop_set_array() helper to set the whole
array property with a single call.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20231109174240.72376-8-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 9 Nov 2023 17:42:35 +0000 (18:42 +0100)]
hw/arm/virt: Use qdev_prop_set_array()
Instead of manually setting "foo-len" and "foo[i]" properties, build a
QList and use the new qdev_prop_set_array() helper to set the whole
array property with a single call.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20231109174240.72376-7-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 9 Nov 2023 17:42:34 +0000 (18:42 +0100)]
hw/arm/vexpress: Use qdev_prop_set_array()
Instead of manually setting "foo-len" and "foo[i]" properties, build a
QList and use the new qdev_prop_set_array() helper to set the whole
array property with a single call.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20231109174240.72376-6-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 9 Nov 2023 17:42:33 +0000 (18:42 +0100)]
hw/arm/sbsa-ref: Use qdev_prop_set_array()
Instead of manually setting "foo-len" and "foo[i]" properties, build a
QList and use the new qdev_prop_set_array() helper to set the whole
array property with a single call.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20231109174240.72376-5-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 9 Nov 2023 17:42:32 +0000 (18:42 +0100)]
hw/arm/mps2: Use qdev_prop_set_array()
Instead of manually setting "foo-len" and "foo[i]" properties, build a
QList and use the new qdev_prop_set_array() helper to set the whole
array property with a single call.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20231109174240.72376-4-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 9 Nov 2023 17:42:31 +0000 (18:42 +0100)]
hw/arm/mps2-tz: Use qdev_prop_set_array()
Instead of manually setting "foo-len" and "foo[i]" properties, build a
QList and use the new qdev_prop_set_array() helper to set the whole
array property with a single call.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20231109174240.72376-3-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 9 Nov 2023 17:42:30 +0000 (18:42 +0100)]
hw/i386/pc: Use qdev_prop_set_array()
Instead of manually setting "foo-len" and "foo[i]" properties, build a
QList and use the new qdev_prop_set_array() helper to set the whole
array property with a single call.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20231109174240.72376-2-kwolf@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (25 commits)
hw/ide/ahci: trigger either error IRQ or regular IRQ, not both
block: Protect bs->file with graph_lock
block: Take graph lock for most of .bdrv_open
vhdx: Take locks for accessing bs->file
qcow2: Take locks for accessing bs->file
block: Add missing GRAPH_RDLOCK annotations
block: Introduce bdrv_co_change_backing_file()
blkverify: Add locking for request_fn
block: Protect bs->backing with graph_lock
block: Mark bdrv_replace_node() GRAPH_WRLOCK
block: Mark bdrv_replace_node_common() GRAPH_WRLOCK
block: Inline bdrv_set_backing_noperm()
block: Mark bdrv_set_backing_hd_drained() GRAPH_WRLOCK
block: Mark bdrv_cow_child() and callers GRAPH_RDLOCK
block: Mark bdrv_filter_child() and callers GRAPH_RDLOCK
block: Mark bdrv_chain_contains() and callers GRAPH_RDLOCK
block: Mark bdrv_(un)freeze_backing_chain() and callers GRAPH_RDLOCK
block: Mark bdrv_skip_filters() and callers GRAPH_RDLOCK
block: Mark bdrv_skip_implicit_filters() and callers GRAPH_RDLOCK
block: Mark bdrv_filter_or_cow_bs() and callers GRAPH_RDLOCK
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Thu, 9 Nov 2023 00:25:12 +0000 (08:25 +0800)]
Merge tag 'pull-halloween-omnibus-081123-1' of https://gitlab.com/stsquad/qemu into staging
Final test, gdbstub, plugin and gitdm updates for 8.2
- fix duplicate register in arm xml
- hide various duplicate system registers from gdbstub
- add new gdb register test to the CI (skipping s390x/ppc64 for now)
- introduce GDBFeatureBuilder
- move plugin initialisation to after vCPU init completes
- enable building TCG plugins on Windows platform
- various gitdm updates
- some mailmap fixes
- disable testing for nios2 signals which have regressed
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmVLpk4ACgkQ+9DbCVqe
# KkT7Zwf+LgNS2T8Gd6UBMk50Zwew3DSzK3HRRkAlxSV9vN9TCprnVDGJn7ObRpfq
# QCwiTmh20JRPFFBEsPGy/ozNPZsuWbt1/vyh3fnU4KD3aMySuyc/Hb9/mONPC9VE
# zh1mUxLCx10uwG5qF8jupIp22BQYD7B9i4YSF1gAUGsQNU7BPvcBDeDzyhCItJen
# 73oG9RQm7vDbjTOcGDkAMAG8iwLt07oMgFrDSgD8x7RWOxG8aiM3ninAW6S5GcO3
# s49t0rTqJIu+pOncYYzmPvFxyZ/6W82tsJYtfxlVML02qj24HOmLWywRWgL5b10y
# TyXsDba3Ru8ez/kEaVVX6u9N1G/Ktg==
# =or8W
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 08 Nov 2023 23:16:30 HKT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-halloween-omnibus-081123-1' of https://gitlab.com/stsquad/qemu: (23 commits)
Revert "tests/tcg/nios2: Re-enable linux-user tests"
mailmap: fixup some more corrupted author fields
contrib/gitdm: add Daynix to domain-map
contrib/gitdm: map HiSilicon to Huawei
contrib/gitdm: add domain-map for Cestc
contrib/gitdm: Add Rivos Inc to the domain map
plugins: allow plugins to be enabled on windows
gitlab: add dlltool to Windows CI
plugins: disable lockstep plugin on windows
plugins: make test/example plugins work on windows
plugins: add dllexport and dllimport to api funcs
configure: tell meson and contrib_plugins about DLLTOOL
cpu: Call plugin hooks only when ready
gdbstub: Introduce GDBFeatureBuilder
gdbstub: Introduce gdb_find_static_feature()
gdbstub: Add num_regs member to GDBFeature
tests/avocado: update the tcg_plugins test
tests/tcg: add an explicit gdbstub register tester
target/arm: hide aliased MIDR from gdbstub
target/arm: hide all versions of DBGD[RS]AR from gdbstub
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Niklas Cassel [Wed, 11 Oct 2023 13:12:20 +0000 (15:12 +0200)]
hw/ide/ahci: trigger either error IRQ or regular IRQ, not both
According to AHCI 1.3.1, 5.3.8.1 RegFIS:Entry, if ERR_STAT is set,
we jump to state ERR:FatalTaskfile, which will raise a TFES IRQ
unconditionally, regardless if the I bit is set in the FIS or not.
Thus, we should never raise a normal IRQ after having sent an error
IRQ.
NOTE: for QEMU platforms that use SeaBIOS, this patch depends on QEMU
commit 784155cdcb02 ("seabios: update submodule to git snapshot"), and
QEMU commit 14f5a7bae4cb ("seabios: update binaries to git snapshot"),
which update SeaBIOS to a version that contains SeaBIOS commit 1281e340
("ahci: handle TFES irq correctly").
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Message-ID: <20231011131220.1992064-1-nks@flawful.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 27 Oct 2023 15:53:33 +0000 (17:53 +0200)]
block: Protect bs->file with graph_lock
Almost all functions that access bs->file already take the graph
lock now. Add locking to the remaining users and finally annotate the
struct field itself as protected by the graph lock.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-25-kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 27 Oct 2023 15:53:32 +0000 (17:53 +0200)]
block: Take graph lock for most of .bdrv_open
Most implementations of .bdrv_open first open their file child (which is
an operation that internally takes the write lock and therefore we
shouldn't hold the graph lock while calling it), and afterwards many
operations that require holding the graph lock, e.g. for accessing
bs->file.
This changes block drivers that follow this pattern to take the graph
lock after opening the child node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-24-kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 27 Oct 2023 15:53:31 +0000 (17:53 +0200)]
vhdx: Take locks for accessing bs->file
This updates the vhdx code to add GRAPH_RDLOCK annotations for all
places that read bs->file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-23-kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 27 Oct 2023 15:53:30 +0000 (17:53 +0200)]
qcow2: Take locks for accessing bs->file
This updates the qcow2 code to add GRAPH_RDLOCK annotations for all
places that read bs->file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-22-kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 27 Oct 2023 15:53:29 +0000 (17:53 +0200)]
block: Add missing GRAPH_RDLOCK annotations
This adds GRAPH_RDLOCK to some driver callbacks that are already called
with the graph lock held, and which will need the annotation because
they access bs->file, but don't have it yet.
This also covers a few callbacks that were not marked GRAPH_RDLOCK
before, but where updating BlockDriver is trivially possible.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-21-kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 27 Oct 2023 15:53:28 +0000 (17:53 +0200)]
block: Introduce bdrv_co_change_backing_file()
bdrv_change_backing_file() is called both inside and outside coroutine
context. This makes it difficult for it to take the graph lock
internally. It also means that driver implementations need to be able to
run outside of coroutines, too. Switch it to the usual model with a
coroutine based implementation and a co_wrapper instead. The new
function is marked GRAPH_RDLOCK.
As the co_wrapper now runs the function in the AioContext of the node
(as it should always have done), this is not GLOBAL_STATE_CODE() any
more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-20-kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 27 Oct 2023 15:53:27 +0000 (17:53 +0200)]
blkverify: Add locking for request_fn
This is either bdrv_co_preadv() or bdrv_co_pwritev() which both need to
have the graph locked. Annotate the function pointer accordingly and add
locking to its callers.
This shouldn't actually have resulted in a bug because the graph lock is
already held by blkverify_co_prwv(), which waits for the coroutines to
terminate. Annotate with GRAPH_RDLOCK as well to make this clearer.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-19-kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 27 Oct 2023 15:53:26 +0000 (17:53 +0200)]
block: Protect bs->backing with graph_lock
Almost all functions that access bs->backing already take the graph
lock now. Add locking to the remaining users and finally annotate the
struct field itself as protected by the graph lock.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-18-kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
retry.py -n 10 -c -- ./qemu-nios2 ./tests/tcg/nios2-linux-user/signals
Results summary:
0: 8 times (80.00%), avg time 2.254 (0.00 varience/0.00 deviation)
-11: 2 times (20.00%), avg time 0.253 (0.00 varience/0.00 deviation)
Ran command 10 times, 8 passes
This wasn't picked up by CI as we don't have a docker container that
can build QEMU with the nios2 compiler. I don't have time to bisect
the breakage and the target is orphaned anyway so take the easy route
and revert it.
Cc: Chris Wulff <crwulff@gmail.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231106185112.2755262-23-alex.bennee@linaro.org>
projects / users / dwmw2 / qemu.git / log