Jonas Karlman [Wed, 21 Jun 2023 22:33:21 +0000 (22:33 +0000)]
drm/rockchip: vop2: Don't crash for invalid duplicate_state
It's possible for users to try to duplicate the CRTC state even when the
state doesn't exist. drm_atomic_helper_crtc_duplicate_state() (and other
users of __drm_atomic_helper_crtc_duplicate_state()) already guard this
with a WARN_ON() instead of crashing, so let's do that here too.
Jonas Karlman [Wed, 21 Jun 2023 22:33:18 +0000 (22:33 +0000)]
drm/rockchip: vop: Use cleanup helper directly as destroy funcs
vop_plane_destroy and vop_crtc_destroy are plain wrappers around
drm_plane_cleanup and drm_crtc_cleanup. Use them directly as plane and
crtc funcs to closer match VOP2 driver.
drm/loongson: Fix error handling in lsdc_pixel_pll_setup()
There are two problems in lsdc_pixel_pll_setup()
1. If kzalloc() fails then call iounmap() to release the resources.
2. Both kzalloc and ioremap does not return error pointers on failure, so
using IS_ERR_OR_NULL() checks is a bit confusing and not very right,
fix this by changing those to NULL checks instead.
Alexander Stein [Thu, 10 Aug 2023 06:32:29 +0000 (08:32 +0200)]
drm/bridge: lvds-codec: Implement atomic_get_input_bus_fmts for LVDS encoder
atomic_get_input_bus_fmts is only implemented for LVDS decoders, resulting
that LVDS encoders only support bus format MEDIA_BUS_FMT_FIXED. This
results in warnings like:
mxsfb 21c8000.lcdif: Bridge does not provide bus format, assuming
MEDIA_BUS_FMT_RGB888_1X24.
Please fix bridge driver by handling atomic_get_input_bus_fmts.
Fix this by reusing lvds_codec_atomic_get_input_bus_fmts currently used
for LVDS decoders. Use RGB888_1X24 for LVDS encoders. This also allows
removing the dedicated struct drm_bridge_funcs for decoders.
Marek Szyprowski [Wed, 9 Aug 2023 14:56:41 +0000 (16:56 +0200)]
drm: bridge: samsung-dsim: Fix waiting for empty cmd transfer FIFO on older Exynos
Samsung DSIM used in older Exynos SoCs (like Exynos 4210, 4x12, 3250)
doesn't report empty level of packer header FIFO. In case of those SoCs,
use the old way of waiting for empty command tranfsfer FIFO, removed
recently by commit 14806c641582 ("drm: bridge: samsung-dsim: Drain command transfer FIFO before transfer").
Randy Dunlap [Fri, 4 Aug 2023 03:01:37 +0000 (20:01 -0700)]
drm: bridge: for GENERIC_PHY_MIPI_DPHY also select GENERIC_PHY
Three DRM bridge drivers select GENERIC_PHY_MIPI_DPHY when GENERIC_PHY
might not be set. This causes Kconfig warnings and a build error.
WARNING: unmet direct dependencies detected for GENERIC_PHY_MIPI_DPHY
Depends on [n]: GENERIC_PHY [=n]
Selected by [y]:
- DRM_NWL_MIPI_DSI [=y] && DRM_BRIDGE [=y] && DRM [=y] && COMMON_CLK [=y] && OF [=y] && HAS_IOMEM [=y]
- DRM_SAMSUNG_DSIM [=y] && DRM [=y] && DRM_BRIDGE [=y] && COMMON_CLK [=y] && OF [=y] && HAS_IOMEM [=y]
(drm/bridge/cadence/Kconfig was found by inspection.)
aarch64-linux-ld: drivers/gpu/drm/bridge/samsung-dsim.o: in function `samsung_dsim_set_phy_ctrl':
drivers/gpu/drm/bridge/samsung-dsim.c:731: undefined reference to `phy_mipi_dphy_get_default_config_for_hsclk'
Prevent these warnings and build error by also selecting GENERIC_PHY
whenever selecting GENERIC_PHY_MIPI_DPHY.
Fixes: fced5a364dee ("drm/bridge: cdns: Convert to phy framework") Fixes: 44cfc6233447 ("drm/bridge: Add NWL MIPI DSI host controller support") Fixes: 171b3b1e0f8b ("drm: bridge: samsung-dsim: Select GENERIC_PHY_MIPI_DPHY") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Aleksandr Nogikh <nogikh@google.com>
Link: lore.kernel.org/r/20230803144227.2187749-1-nogikh@google.com Cc: Adam Ford <aford173@gmail.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Guido Günther <agx@sigxcpu.org> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Robert Foss <rfoss@kernel.org> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Adam Ford <aford173@gmail.com> Tested-by: Aleksandr Nogikh <nogikh@google.com> Reviewed-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230804030140.21395-1-rdunlap@infradead.org
Marek Vasut [Sun, 9 Jul 2023 13:48:27 +0000 (15:48 +0200)]
drm: bridge: samsung-dsim: Initialize ULPS EXIT for i.MX8M DSIM
The ULPS EXIT is initialized to 0xaf in downstream BSP as well as older
revisions of this patchset, in newer revisions of the DSIM patchset it
was left out and set to 0. Fix it.
Karolina Stolarek [Fri, 11 Aug 2023 11:36:49 +0000 (13:36 +0200)]
drm/ttm/tests: Require MMU when testing
Satisfy MMU dependency when testing TTM with KUnit. This fixes
compilation errors on platforms that don't select this option
by default.
Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202308110133.f0lhFwMV-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202308111032.enU8IisR-lkp@intel.com/ Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230811113649.697886-1-karolina.stolarek@intel.com Signed-off-by: Christian König <christian.koenig@amd.com>
Danilo Krummrich [Wed, 9 Aug 2023 22:50:14 +0000 (00:50 +0200)]
drm/test: drm_exec: fix memory leak on object prepare
drm_exec_prepare_obj() and drm_exec_prepare_array() both reserve
dma-fence slots and hence a dma_resv_list without ever freeing it.
Make sure to call drm_gem_private_object_fini() for each GEM object
passed to drm_exec_prepare_obj()/drm_exec_prepare_array() throughout the
test to fix this up.
Dmitry Osipenko [Mon, 7 Aug 2023 00:04:44 +0000 (03:04 +0300)]
drm/panfrost: Sync IRQ by job's timeout handler
Panfrost IRQ handler may stuck for a long time, for example this happens
when there is a bad HDMI connection and HDMI handler takes a long time to
finish processing, holding Panfrost. Make Panfrost's job timeout handler
to sync IRQ before checking fence signal status in order to prevent
spurious job timeouts due to a slow IRQ processing.
Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> # MediaTek MT8192 and MT8195 Chromebooks Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230807000444.14926-1-dmitry.osipenko@collabora.com
Karolina Stolarek [Tue, 8 Aug 2023 09:51:14 +0000 (11:51 +0200)]
drm/ttm/tests: Add tests for ttm_pool
Add KUnit tests that exercise page allocation using page pools
and freeing pages, either by returning them to the pool or
freeing them. Add a basic test for ttm_pool cleanup. Introduce
helpers to create a dummy ttm_buffer_object.
Karolina Stolarek [Tue, 8 Aug 2023 09:51:13 +0000 (11:51 +0200)]
drm/ttm/tests: Add tests for ttm_device
Test initialization and cleanup of the ttm_device struct, including
some error paths. Verify the creation of page pools if use_dma_alloc
param is true.
Add support VPU 4 - new generation of VPU IP with various
hardware design improvements. From driver point of view, it differs
in register set, initialization process and MMU memory ranges.
Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Co-developed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Co-developed-by: Karol Wachowski <karol.wachowski@linux.intel.com> Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230731161258.2987564-7-stanislaw.gruszka@linux.intel.com
Karol Wachowski [Mon, 31 Jul 2023 16:12:57 +0000 (18:12 +0200)]
accel/ivpu: Refactor memory ranges logic
Add new dma range and change naming convention for virtual address
memory ranges managed by KMD.
New available ranges are named as follows:
* global range - global context accessible by FW
* aliased range - user context accessible by FW
* dma range - user context accessible by DMA
* shave range - user context accessible by shaves
* global shave range - global context accessible by shave nn
accel/ivpu: Extend get_param ioctl to identify capabilities
Add DRM_IVPU_PARAM_CAPABILITIES parameters to get_param ioctl to query
driver capabilities. For now use it for identify metric streamer and
new dma memory range features. Currently upstream version of intel_vpu
does not have those, they will be added it the future.
Jacek Lawrynowicz [Mon, 31 Jul 2023 16:12:54 +0000 (18:12 +0200)]
accel/ivpu: Use generation based function and registers names
Given that VPU generation can be used by multiple platforms, driver should
use VPU IP generation names instead of a platform.
Change naming for functions and registries.
Use 37XX format, where:
3 - major VPU IP generation version
7 - minor VPU IP generation version
XX - postfix indicating this is an architecture and not marketing name
Jacek Lawrynowicz [Mon, 31 Jul 2023 16:12:53 +0000 (18:12 +0200)]
accel/ivpu: Rename sources to use generation based names
Given that VPU generation can be used by multiple platforms, driver should
use VPU IP generation in names instead of a platform.
Change naming for sources files.
Use 37XX format, where:
3 - major VPU IP generation version
7 - minor VPU IP generation version
XX - postfix indicating this is an architecture and not marketing name
Faith Ekstrand [Mon, 7 Aug 2023 23:41:44 +0000 (18:41 -0500)]
drm/nouveau/sched: Don't pass user flags to drm_syncobj_find_fence()
The flags field in drm_syncobj_find_fence() takes SYNCOBJ_WAIT flags
from the syncobj UAPI whereas sync->flags is from the nouveau UAPI. What
we actually want is 0 flags which tells it to just try to find the
fence and then return without waiting.
Danilo Krummrich [Mon, 7 Aug 2023 16:32:26 +0000 (18:32 +0200)]
drm/nouveau: uvmm: remove dedicated VM pointer from VMAs
VMAs can find their corresponding VM through their embedded struct
drm_gpuva which already carries a pointer to a struct drm_gpuva_manager
which the VM is based on. Hence, remove the struct nouveau_uvmm pointer
from struct nouveau_uvma to save a couple of bytes per mapping.
Danilo Krummrich [Mon, 7 Aug 2023 16:32:25 +0000 (18:32 +0200)]
drm/nouveau: uvmm: remove incorrect calls to mas_unlock()
Remove incorrect calls to mas_unlock() in the unwind path of
__nouveau_uvma_region_insert(). The region maple tree uses an external
lock instead, namely the global uvmm lock.
Zhu Wang [Mon, 31 Jul 2023 13:18:10 +0000 (21:18 +0800)]
drm/mcde: remove redundant of_match_ptr
The driver depends on CONFIG_OF, so it is not necessary to use
of_match_ptr here.
Even for drivers that do not depend on CONFIG_OF, it's almost always
better to leave out the of_match_ptr(), since the only thing it can
possibly do is to save a few bytes of .text if a driver can be used both
with and without it. Hence we remove of_match_ptr.
Zhu Wang [Mon, 31 Jul 2023 12:42:22 +0000 (20:42 +0800)]
drm/tve200: remove redundant of_match_ptr
The driver depends on CONFIG_OF, so it is not necessary to use
of_match_ptr here.
Even for drivers that do not depend on CONFIG_OF, it's almost always
better to leave out the of_match_ptr(), since the only thing it can
possibly do is to save a few bytes of .text if a driver can be used both
with and without it. Hence we remove of_match_ptr.
Danilo Krummrich [Fri, 4 Aug 2023 18:23:51 +0000 (20:23 +0200)]
drm/nouveau: implement new VM_BIND uAPI
This commit provides the implementation for the new uapi motivated by the
Vulkan API. It allows user mode drivers (UMDs) to:
1) Initialize a GPU virtual address (VA) space via the new
DRM_IOCTL_NOUVEAU_VM_INIT ioctl for UMDs to specify the portion of VA
space managed by the kernel and userspace, respectively.
2) Allocate and free a VA space region as well as bind and unbind memory
to the GPUs VA space via the new DRM_IOCTL_NOUVEAU_VM_BIND ioctl.
UMDs can request the named operations to be processed either
synchronously or asynchronously. It supports DRM syncobjs
(incl. timelines) as synchronization mechanism. The management of the
GPU VA mappings is implemented with the DRM GPU VA manager.
3) Execute push buffers with the new DRM_IOCTL_NOUVEAU_EXEC ioctl. The
execution happens asynchronously. It supports DRM syncobj (incl.
timelines) as synchronization mechanism. DRM GEM object locking is
handled with drm_exec.
Both, DRM_IOCTL_NOUVEAU_VM_BIND and DRM_IOCTL_NOUVEAU_EXEC, use the DRM
GPU scheduler for the asynchronous paths.
Danilo Krummrich [Fri, 4 Aug 2023 18:23:50 +0000 (20:23 +0200)]
drm/nouveau: nvkm/vmm: implement raw ops to manage uvmm
The new VM_BIND UAPI uses the DRM GPU VA manager to manage the VA space.
Hence, we a need a way to manipulate the MMUs page tables without going
through the internal range allocator implemented by nvkm/vmm.
This patch adds a raw interface for nvkm/vmm to pass the resposibility
for managing the address space and the corresponding map/unmap/sparse
operations to the upper layers.
Danilo Krummrich [Fri, 4 Aug 2023 18:23:49 +0000 (20:23 +0200)]
drm/nouveau: chan: provide nouveau_channel_kill()
The new VM_BIND UAPI implementation introduced in subsequent commits
will allow asynchronous jobs processing push buffers and emitting fences.
If a job times out, we need a way to recover from this situation. For
now, simply kill the channel to unblock all hung up jobs and signal
userspace that the device is dead on the next EXEC or VM_BIND ioctl.
Danilo Krummrich [Fri, 4 Aug 2023 18:23:48 +0000 (20:23 +0200)]
drm/nouveau: fence: fail to emit when fence context is killed
The new VM_BIND UAPI implementation introduced in subsequent commits
will allow asynchronous jobs processing push buffers and emitting
fences.
If a fence context is killed, e.g. due to a channel fault, jobs which
are already queued for execution might still emit new fences. In such a
case a job would hang forever.
To fix that, fail to emit a new fence on a killed fence context with
-ENODEV to unblock the job.
Danilo Krummrich [Fri, 4 Aug 2023 18:23:47 +0000 (20:23 +0200)]
drm/nouveau: fence: separate fence alloc and emit
The new (VM_BIND) UAPI exports DMA fences through DRM syncobjs. Hence,
in order to emit fences within DMA fence signalling critical sections
(e.g. as typically done in the DRM GPU schedulers run_job() callback) we
need to separate fence allocation and fence emitting.
Danilo Krummrich [Fri, 4 Aug 2023 18:23:44 +0000 (20:23 +0200)]
drm/nouveau: get vmm via nouveau_cli_vmm()
Provide a getter function for the client's current vmm context. Since
we'll add a new (u)vmm context for UMD bindings in subsequent commits,
this will keep the code clean.
Dave Airlie [Fri, 4 Aug 2023 18:23:42 +0000 (20:23 +0200)]
drm/nouveau: fixup the uapi header file.
nouveau > 10 years ago had a plan for new multiplexer inside a multiplexer
API using nvif. It never fully reached fruition, fast forward 10 years,
and the new vulkan driver is avoiding libdrm and calling ioctls, and
these 3 ioctls, getparam, channel alloc + free don't seem to be things
we'd want to use nvif for.
Undeprecate and put them into the uapi header so we can just copy it
into mesa later.
Danilo Krummrich [Fri, 4 Aug 2023 18:23:41 +0000 (20:23 +0200)]
drm/gem: fix lockdep check for dma-resv lock
When no custom lock is set to protect a GEMs GPUVA list, lockdep checks
should fall back to the GEM objects dma-resv lock. With the current
implementation we're setting the lock_dep_map of the GEM objects 'resv'
pointer (in case no custom lock_dep_map is set yet) on
drm_gem_private_object_init().
However, the GEM objects 'resv' pointer might still change after
drm_gem_private_object_init() is called, e.g. through
ttm_bo_init_reserved(). This can result in the wrong lock being tracked.
To fix this, call dma_resv_held() directly from
drm_gem_gpuva_assert_lock_held() and fall back to the GEMs lock_dep_map
pointer only if an actual custom lock is set.
Javier Martinez Canillas [Fri, 4 Aug 2023 12:51:43 +0000 (14:51 +0200)]
drm: Drop select FRAMEBUFFER_CONSOLE for DRM_FBDEV_EMULATION
The commit c242f48433e7 ("drm: Make FB_CORE to be selected if DRM fbdev
emulation is enabled") changed DRM_FBDEV_EMULATION from 'depends on FB'
to an effective 'select FB_CORE', so any config that previously had DRM=y
and FB=n now has FB_CORE=y and FRAMEBUFFER_CONSOLE=y.
This leads to unmet direct dependencies detected for FRAMEBUFFER_CONSOLE
as reported by Arthur Grillo, e.g:
WARNING: unmet direct dependencies detected for FRAMEBUFFER_CONSOLE
Depends on [n]: VT [=n] && FB_CORE [=y] && !UML [=y]
Selected by [y]:
- DRM_FBDEV_EMULATION [=y] && HAS_IOMEM [=y] && DRM [=y] && !EXPERT [=n]
Arnd Bergmann suggests to drop the select FRAMEBUFFER_CONSOLE for the
DRM_FBDEV_EMULATION Kconfig symbol, since a possible use case could
be to enable DRM fbdev emulation but without a framebuffer console.
Fixes: c242f48433e7 ("drm: Make FB_CORE to be selected if DRM fbdev emulation is enabled") Reported-by: Arthur Grillo <arthurgrillo@riseup.net> Closes: https://lore.kernel.org/dri-devel/20230726220325.278976-1-arthurgrillo@riseup.net Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Arthur Grillo <arthurgrillo@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230804125156.1387542-1-javierm@redhat.com
Thomas Zimmermann [Thu, 3 Aug 2023 18:36:12 +0000 (20:36 +0200)]
vfio-dev/mdpy-fb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:36:11 +0000 (20:36 +0200)]
fbdev/xilinxfb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:36:10 +0000 (20:36 +0200)]
fbdev/vesafb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:36:09 +0000 (20:36 +0200)]
fbdev/valkyriefb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:36:08 +0000 (20:36 +0200)]
fbdev/uvesafb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:36:07 +0000 (20:36 +0200)]
fbdev/sunxvr2500: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:36:06 +0000 (20:36 +0200)]
fbdev/sunxvr1000: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:36:05 +0000 (20:36 +0200)]
fbdev/sstfb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:36:04 +0000 (20:36 +0200)]
fbdev/simplefb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:36:03 +0000 (20:36 +0200)]
fbdev/sh7760fb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:36:02 +0000 (20:36 +0200)]
fbdev/s3cfb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:36:01 +0000 (20:36 +0200)]
fbdev/q40fb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:36:00 +0000 (20:36 +0200)]
fbdev/pxafb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:59 +0000 (20:35 +0200)]
fbdev/pxa168fb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:58 +0000 (20:35 +0200)]
fbdev/pmagb-b-fb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
* fix driver name in commit message
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:57 +0000 (20:35 +0200)]
fbdev/pmag-ba-fb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:56 +0000 (20:35 +0200)]
fbdev/pmag-aa-fb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:55 +0000 (20:35 +0200)]
fbdev/platinumfb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:54 +0000 (20:35 +0200)]
fbdev/omapfb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:53 +0000 (20:35 +0200)]
fbdev/offb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:52 +0000 (20:35 +0200)]
fbdev/ocfb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:51 +0000 (20:35 +0200)]
fbdev/mx3fb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:50 +0000 (20:35 +0200)]
fbdev/mmpfb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:49 +0000 (20:35 +0200)]
fbdev/mb862xxfb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:48 +0000 (20:35 +0200)]
fbdev/maxinefb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:47 +0000 (20:35 +0200)]
fbdev/macfb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:46 +0000 (20:35 +0200)]
fbdev/kyro: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:45 +0000 (20:35 +0200)]
fbdev/imxfb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Helge Deller <deller@gmx.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-21-tzimmermann@suse.de
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:44 +0000 (20:35 +0200)]
fbdev/i740fb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:43 +0000 (20:35 +0200)]
fbdev/gxt4500: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:42 +0000 (20:35 +0200)]
fbdev/grvga: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:41 +0000 (20:35 +0200)]
fbdev/goldfishfb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:40 +0000 (20:35 +0200)]
fbdev/geode/lxfb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:39 +0000 (20:35 +0200)]
fbdev/geode/gxfb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:38 +0000 (20:35 +0200)]
fbdev/geode/gx1fb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:37 +0000 (20:35 +0200)]
fbdev/g364fb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:36 +0000 (20:35 +0200)]
fbdev/fsl-diu-fb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:35 +0000 (20:35 +0200)]
fbdev/fm2fb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:34 +0000 (20:35 +0200)]
fbdev/efifb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:33 +0000 (20:35 +0200)]
fbdev/da8xx-fb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:32 +0000 (20:35 +0200)]
fbdev/chipsfb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:31 +0000 (20:35 +0200)]
fbdev/carminefb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:30 +0000 (20:35 +0200)]
fbdev/aty128fb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:29 +0000 (20:35 +0200)]
fbdev/atmel_lcdfb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Helge Deller <deller@gmx.de> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-5-tzimmermann@suse.de
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:28 +0000 (20:35 +0200)]
fbdev/asiliantfb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:27 +0000 (20:35 +0200)]
fbdev/acornfb: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Thomas Zimmermann [Thu, 3 Aug 2023 18:35:26 +0000 (20:35 +0200)]
media/vivid: Use fbdev I/O helpers
Set struct fb_ops and with FB_DEFAULT_IOMEM_OPS, fbdev's initializer
for I/O memory. Sets the callbacks to the cfb_ and fb_io_ functions.
Select the correct modules with Kconfig's FB_IOMEM_HELPERS token.
The macro and token set the currently selected values, so there is
no functional change.
v3:
* use _IOMEM_ in commit message
v2:
* updated to use _IOMEM_ tokens
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Helge Deller <deller@gmx.de> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230803184034.6456-2-tzimmermann@suse.de
projects / users / dwmw2 / linux.git / log