Linus Torvalds [Fri, 11 Dec 2020 22:29:46 +0000 (14:29 -0800)]
Merge tag 'mtd/fixes-for-5.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"Second series of fixes for raw NAND drivers initiated because of a
rework of the ECC engine subsystem.
The location of the DT parsing logic got moved, breaking several
drivers which in fact were not doing the ECC engine initialization at
the right place.
These drivers have been fixed by enforcing a particular ECC engine
type and algorithm, software Hamming, while the algorithm may be
overwritten by a DT property. This merge request fixes this in the
xway, socrates, plat_nand, pasemi, orion, mpc5121, gpio, au1550 and
ams-delta controller drivers"
* tag 'mtd/fixes-for-5.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: xway: Do not force a particular software ECC engine
mtd: rawnand: socrates: Do not force a particular software ECC engine
mtd: rawnand: plat_nand: Do not force a particular software ECC engine
mtd: rawnand: pasemi: Do not force a particular software ECC engine
mtd: rawnand: orion: Do not force a particular software ECC engine
mtd: rawnand: mpc5121: Do not force a particular software ECC engine
mtd: rawnand: gpio: Do not force a particular software ECC engine
mtd: rawnand: au1550: Do not force a particular software ECC engine
mtd: rawnand: ams-delta: Do not force a particular software ECC engine
Linus Torvalds [Fri, 11 Dec 2020 22:26:17 +0000 (14:26 -0800)]
Merge tag 'mmc-v5.10-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"A couple of MMC fixes:
MMC core:
- Fixup condition for CMD13 polling for RPMB requests
MMC host:
- mtk-sd: Fix system suspend/resume support for CQHCI
- mtd-sd: Extend SDIO IRQ fix to more variants
- sdhci-of-arasan: Fix clock registration error for Keem Bay SOC
- tmio: Bring HW to a sane state after a power off"
* tag 'mmc-v5.10-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: mediatek: mark PM functions as __maybe_unused
mmc: block: Fixup condition for CMD13 polling for RPMB requests
mmc: tmio: improve bringing HW to a sane state with MMC_POWER_OFF
mmc: sdhci-of-arasan: Fix clock registration error for Keem Bay SOC
mmc: mediatek: Extend recheck_sdio_irq fix to more variants
mmc: mediatek: Fix system suspend/resume support for CQHCI
Andrii Nakryiko [Fri, 11 Dec 2020 21:36:25 +0000 (22:36 +0100)]
bpf: Fix enum names for bpf_this_cpu_ptr() and bpf_per_cpu_ptr() helpers
Remove bpf_ prefix, which causes these helpers to be reported in verifier
dump as bpf_bpf_this_cpu_ptr() and bpf_bpf_per_cpu_ptr(), respectively. Lets
fix it as long as it is still possible before UAPI freezes on these helpers.
Linus Torvalds [Fri, 11 Dec 2020 22:10:51 +0000 (14:10 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"8 patches.
Subsystems affected by this patch series: proc, selftests, kbuild, and
mm (pagecache, kasan, hugetlb)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/hugetlb: clear compound_nr before freeing gigantic pages
kasan: fix object remaining in offline per-cpu quarantine
elfcore: fix building with clang
initramfs: fix clang build failure
kbuild: avoid static_assert for genksyms
selftest/fpu: avoid clang warning
proc: use untagged_addr() for pagemap_read addresses
revert "mm/filemap: add static for function __add_to_page_cache_locked"
Gerald Schaefer [Fri, 11 Dec 2020 21:36:53 +0000 (13:36 -0800)]
mm/hugetlb: clear compound_nr before freeing gigantic pages
Commit 1378a5ee451a ("mm: store compound_nr as well as compound_order")
added compound_nr counter to first tail struct page, overlaying with
page->mapping. The overlay itself is fine, but while freeing gigantic
hugepages via free_contig_range(), a "bad page" check will trigger for
non-NULL page->mapping on the first tail page:
BUG: Bad page state in process bash pfn:380001
page:00000000c35f0856 refcount:0 mapcount:0 mapping:00000000126b68aa index:0x0 pfn:0x380001
aops:0x0
flags: 0x3ffff00000000000()
raw: 3ffff00000000000000000000000010000000000000001220000000100000000
raw: 00000000000000000000000000000000ffffffff000000000000000000000000
page dumped because: non-NULL mapping
Modules linked in:
CPU: 6 PID: 616 Comm: bash Not tainted 5.10.0-rc7-next-20201208 #1
Hardware name: IBM 3906 M03 703 (LPAR)
Call Trace:
show_stack+0x6e/0xe8
dump_stack+0x90/0xc8
bad_page+0xd6/0x130
free_pcppages_bulk+0x26a/0x800
free_unref_page+0x6e/0x90
free_contig_range+0x94/0xe8
update_and_free_page+0x1c4/0x2c8
free_pool_huge_page+0x11e/0x138
set_max_huge_pages+0x228/0x300
nr_hugepages_store_common+0xb8/0x130
kernfs_fop_write+0xd2/0x218
vfs_write+0xb0/0x2b8
ksys_write+0xac/0xe0
system_call+0xe6/0x288
Disabling lock debugging due to kernel taint
This is because only the compound_order is cleared in
destroy_compound_gigantic_page(), and compound_nr is set to
1U << order == 1 for order 0 in set_compound_order(page, 0).
Fix this by explicitly clearing compound_nr for first tail page after
calling set_compound_order(page, 0).
Link: https://lkml.kernel.org/r/20201208182813.66391-2-gerald.schaefer@linux.ibm.com Fixes: 1378a5ee451a ("mm: store compound_nr as well as compound_order") Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: <stable@vger.kernel.org> [5.9+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kuan-Ying Lee [Fri, 11 Dec 2020 21:36:49 +0000 (13:36 -0800)]
kasan: fix object remaining in offline per-cpu quarantine
We hit this issue in our internal test. When enabling generic kasan, a
kfree()'d object is put into per-cpu quarantine first. If the cpu goes
offline, object still remains in the per-cpu quarantine. If we call
kmem_cache_destroy() now, slub will report "Objects remaining" error.
=============================================================================
BUG test_module_slab (Not tainted): Objects remaining in test_module_slab on __kmem_cache_shutdown()
-----------------------------------------------------------------------------
Register a cpu hotplug function to remove all objects in the offline
per-cpu quarantine when cpu is going offline. Set a per-cpu variable to
indicate this cpu is offline.
[qiang.zhang@windriver.com: fix slab double free when cpu-hotplug] Link: https://lkml.kernel.org/r/20201204102206.20237-1-qiang.zhang@windriver.com Link: https://lkml.kernel.org/r/1606895585-17382-2-git-send-email-Kuan-Ying.Lee@mediatek.com Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com> Signed-off-by: Zqiang <qiang.zhang@windriver.com> Suggested-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Guangye Yang <guangye.yang@mediatek.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Nicholas Tang <nicholas.tang@mediatek.com> Cc: Miles Chen <miles.chen@mediatek.com> Cc: Qian Cai <qcai@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Fri, 11 Dec 2020 21:36:46 +0000 (13:36 -0800)]
elfcore: fix building with clang
kernel/elfcore.c only contains weak symbols, which triggers a bug with
clang in combination with recordmcount:
Cannot find symbol for section 2: .text.
kernel/elfcore.o: failed
Move the empty stubs into linux/elfcore.h as inline functions. As only
two architectures use these, just use the architecture specific Kconfig
symbols to key off the declaration.
Arnd Bergmann [Fri, 11 Dec 2020 21:36:42 +0000 (13:36 -0800)]
initramfs: fix clang build failure
There is only one function in init/initramfs.c that is in the .text
section, and it is marked __weak. When building with clang-12 and the
integrated assembler, this leads to a bug with recordmcount:
./scripts/recordmcount "init/initramfs.o"
Cannot find symbol for section 2: .text.
init/initramfs.o: failed
I'm not quite sure what exactly goes wrong, but I notice that this
function is only ever called from an __init function, and normally
inlined. Marking it __init as well is clearly correct and it leads to
recordmcount no longer complaining.
Arnd Bergmann [Fri, 11 Dec 2020 21:36:38 +0000 (13:36 -0800)]
kbuild: avoid static_assert for genksyms
genksyms does not know or care about the _Static_assert() built-in, and
sometimes falls back to ignoring the later symbols, which causes
undefined behavior such as
WARNING: modpost: EXPORT symbol "ethtool_set_ethtool_phy_ops" [vmlinux] version generation failed, symbol will not be versioned.
ld: net/ethtool/common.o: relocation R_AARCH64_ABS32 against `__crc_ethtool_set_ethtool_phy_ops' can not be used when making a shared object
net/ethtool/common.o:(_ftrace_annotated_branch+0x0): dangerous relocation: unsupported relocation
Redefine static_assert for genksyms to avoid that.
Link: https://lkml.kernel.org/r/20201203230955.1482058-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Ard Biesheuvel <ardb@kernel.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Kees Cook <keescook@chromium.org> Cc: Rikard Falkeborn <rikard.falkeborn@gmail.com> Cc: Marco Elver <elver@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miles Chen [Fri, 11 Dec 2020 21:36:31 +0000 (13:36 -0800)]
proc: use untagged_addr() for pagemap_read addresses
When we try to visit the pagemap of a tagged userspace pointer, we find
that the start_vaddr is not correct because of the tag.
To fix it, we should untag the userspace pointers in pagemap_read().
I tested with 5.10-rc4 and the issue remains.
Explanation from Catalin in [1]:
"Arguably, that's a user-space bug since tagged file offsets were never
supported. In this case it's not even a tag at bit 56 as per the arm64
tagged address ABI but rather down to bit 47. You could say that the
problem is caused by the C library (malloc()) or whoever created the
tagged vaddr and passed it to this function. It's not a kernel
regression as we've never supported it.
Now, pagemap is a special case where the offset is usually not
generated as a classic file offset but rather derived by shifting a
user virtual address. I guess we can make a concession for pagemap
(only) and allow such offset with the tag at bit (56 - PAGE_SHIFT + 3)"
My test code is based on [2]:
A userspace pointer which has been tagged by 0xb4: 0xb400007662f541c8
userspace program:
uint64 OsLayer::VirtualToPhysical(void *vaddr) {
uint64 frame, paddr, pfnmask, pagemask;
int pagesize = sysconf(_SC_PAGESIZE);
off64_t off = ((uintptr_t)vaddr) / pagesize * 8; // off = 0xb400007662f541c8 / pagesize * 8 = 0x5a00003b317aa0
int fd = open(kPagemapPath, O_RDONLY);
...
if (lseek64(fd, off, SEEK_SET) != off || read(fd, &frame, 8) != 8) {
int err = errno;
string errtxt = ErrorString(err);
if (fd >= 0)
close(fd);
return 0;
}
...
}
/* watch out for wraparound */
// svpfn == 0xb400007662f54
// (mm->task_size >> PAGE) == 0x8000000
if (svpfn > mm->task_size >> PAGE_SHIFT) // the condition is true because of the tag 0xb4
start_vaddr = end_vaddr;
ret = 0;
while (count && (start_vaddr < end_vaddr)) { // we cannot visit correct entry because start_vaddr is set to end_vaddr
int len;
unsigned long end;
...
}
...
}
Andrew Morton [Fri, 11 Dec 2020 21:36:27 +0000 (13:36 -0800)]
revert "mm/filemap: add static for function __add_to_page_cache_locked"
Revert commit 3351b16af494 ("mm/filemap: add static for function
__add_to_page_cache_locked") due to incompatibility with
ALLOW_ERROR_INJECTION which result in build errors.
Link: https://lkml.kernel.org/r/CAADnVQJ6tmzBXvtroBuEH6QA0H+q7yaSKxrVvVxhqr3KBZdEXg@mail.gmail.com Tested-by: Justin Forbes <jmforbes@linuxtx.org> Tested-by: Greg Thelen <gthelen@google.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Michal Kubecek <mkubecek@suse.cz> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Tony Luck <tony.luck@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miquel Raynal [Thu, 3 Dec 2020 19:03:40 +0000 (20:03 +0100)]
mtd: rawnand: xway: Do not force a particular software ECC engine
Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.
Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.
Add the necessary logic to be sure Hamming keeps being only a default.
Miquel Raynal [Thu, 3 Dec 2020 19:03:39 +0000 (20:03 +0100)]
mtd: rawnand: socrates: Do not force a particular software ECC engine
Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.
Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.
Add the necessary logic to be sure Hamming keeps being only a default.
Miquel Raynal [Thu, 3 Dec 2020 19:03:38 +0000 (20:03 +0100)]
mtd: rawnand: plat_nand: Do not force a particular software ECC engine
Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.
Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.
Add the necessary logic to be sure Hamming keeps being only a default.
Miquel Raynal [Thu, 3 Dec 2020 19:03:37 +0000 (20:03 +0100)]
mtd: rawnand: pasemi: Do not force a particular software ECC engine
Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.
Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.
Add the necessary logic to be sure Hamming keeps being only a default.
Miquel Raynal [Thu, 3 Dec 2020 19:03:36 +0000 (20:03 +0100)]
mtd: rawnand: orion: Do not force a particular software ECC engine
Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.
Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.
Add the necessary logic to be sure Hamming keeps being only a default.
Reported-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Fixes: 553508cec2e8 ("mtd: rawnand: orion: Move the ECC initialization to ->attach_chip()") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Link: https://lore.kernel.org/linux-mtd/20201203190340.15522-6-miquel.raynal@bootlin.com
Miquel Raynal [Thu, 3 Dec 2020 19:03:35 +0000 (20:03 +0100)]
mtd: rawnand: mpc5121: Do not force a particular software ECC engine
Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.
Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.
Add the necessary logic to be sure Hamming keeps being only a default.
Miquel Raynal [Thu, 3 Dec 2020 19:03:34 +0000 (20:03 +0100)]
mtd: rawnand: gpio: Do not force a particular software ECC engine
Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.
Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.
Add the necessary logic to be sure Hamming keeps being only a default.
Miquel Raynal [Thu, 3 Dec 2020 19:03:33 +0000 (20:03 +0100)]
mtd: rawnand: au1550: Do not force a particular software ECC engine
Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.
Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.
Add the necessary logic to be sure Hamming keeps being only a default.
Miquel Raynal [Thu, 3 Dec 2020 19:03:32 +0000 (20:03 +0100)]
mtd: rawnand: ams-delta: Do not force a particular software ECC engine
Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.
Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.
Add the necessary logic to be sure Hamming keeps being only a default.
Linus Torvalds [Fri, 11 Dec 2020 18:25:04 +0000 (10:25 -0800)]
Merge tag 'pinctrl-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Here is a late set of pin control fixes for v5.10, most concern some
minor and major issues found in the Intel drivers. Some are so hairy
that I have no idea what is going on there, but luckily the maintainer
knows what's up.
We also have an interesting fix for AMD, which makes AMD-based laptops
more stable IIUC.
Summary:
- Fix up some SPI group and a register offset on Intel Jasperlake
- Set default bias on Intel Merrifield
- Preserve debouncing on Intel Baytrail
- Stop .set_type() irqchip callback in the AMD driver from fiddling
with the debounce filter
- Fix access to GPIO banks that are pass-thru on the Aspeed
- Fix a fix for the Intel pin control driver to disable Rx/Tx when
requesting a UART line as GPIO"
* tag 'pinctrl-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: intel: Actually disable Tx and Rx buffers on GPIO request
pinctrl: aspeed: Fix GPIO requests on pass-through banks
pinctrl: amd: remove debounce filter setting in IRQ type setting
pinctrl: baytrail: Avoid clearing debounce value when turning it off
pinctrl: merrifield: Set default bias in case no particular value given
pinctrl: jasperlake: Fix HOSTSW_OWN offset
pinctrl: jasperlake: Unhide SPI group of pins
Linus Torvalds [Fri, 11 Dec 2020 18:22:17 +0000 (10:22 -0800)]
Merge tag 'v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"These are hopefully the last GPIO fixes for this cycle.
All are driver fixes except a small resource leak for pin ranges in
the gpiolib. Two are PM related, which is nice because when developers
start to find PM bugs it is usually because they have smoked out the
bugs of more severe nature.
Summary:
- Fix runtime PM balancing on the errorpath of the Arizona driver
- Fix a suspend NULL pointer reference in the dwapb driver
- Balance free:ing in gpiochip_generic_free()
- Fix runtime PM balancing on the errorpath of the zynq driver
- Fix irqdomain use-after-free in the mvebu driver
- Break an eternal loop in the spreadtrum EIC driver"
* tag 'v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: eic-sprd: break loop when getting NULL device resource
gpio: mvebu: fix potential user-after-free on probe
gpio: zynq: fix reference leak in zynq_gpio functions
gpiolib: Don't free if pin ranges are not defined
gpio: dwapb: fix NULL pointer dereference at dwapb_gpio_suspend()
gpio: arizona: disable pm_runtime in case of failure
Linus Torvalds [Fri, 11 Dec 2020 18:10:13 +0000 (10:10 -0800)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Two small clk driver build fixes
- Remove __packed from a Renesas struct to improve portability
- Fix a linking problem with i.MX when config options don't agree"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: renesas: r9a06g032: Drop __packed for portability
clk: imx: scu: fix MXC_CLK_SCU module build break
Linus Torvalds [Fri, 11 Dec 2020 01:52:13 +0000 (17:52 -0800)]
Merge tag 'drm-fixes-2020-12-11' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Last week of fixes, just amdgpu and i915 collections. We had a i915
regression reported by HJ Lu reported this morning, and this contains
a fix for that he has tested.
There are a fair few other fixes, but they are spread across the two
drivers, and all fairly self contained.
amdgpu:
- Fan fix for CI asics
- Fix a warning in possible_crtcs
- Build fix for when debugfs is disabled
- Display overflow fix
- Display watermark fixes for Renoir
- SDMA 5.2 fix
- Stolen vga memory regression fix
- Power profile fixes
- Fix a regression from removal of GEM and PRIME callbacks
* tag 'drm-fixes-2020-12-11' of git://anongit.freedesktop.org/drm/drm:
drm/i915/display: Go softly softly on initial modeset failure
drm/amd/pm: typo fix (CUSTOM -> COMPUTE)
drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs
drm/amdgpu: fix size calculation with stolen vga memory
drm/amd/pm: update smu10.h WORKLOAD_PPLIB setting for raven
drm/amdkfd: Fix leak in dmabuf import
drm/amdgpu: fix sdma instance fw version and feature version init
drm/amd/display: Add wm table for Renoir
drm/amd/display: Prevent bandwidth overflow
drm/amdgpu: fix debugfs creation/removal, again
drm/amdgpu/disply: set num_crtc earlier
drm/amdgpu/powerplay: parse fan table for CI asics
drm/i915/gt: Declare gen9 has 64 mocs entries!
drm/i915/display/dp: Compute the correct slice count for VDSC on DP
drm/i915: fix size_t greater or equal to zero comparison
drm/i915/gt: Cancel the preemption timeout on responding to it
drm/i915/gt: Ignore repeated attempts to suspend request flow across reset
drm/i915/gem: Propagate error from cancelled submit due to context closure
drm/i915/gem: Check the correct variable in selftest
Linus Torvalds [Fri, 11 Dec 2020 00:36:30 +0000 (16:36 -0800)]
Merge tag 'powerpc-5.10-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"One commit to implement copy_from_kernel_nofault_allowed(), otherwise
copy_from_kernel_nofault() can trigger warnings when accessing bad
addresses in some configurations.
Thanks to Christophe Leroy and Qian Cai"
* tag 'powerpc-5.10-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Fix KUAP warning by providing copy_from_kernel_nofault_allowed()
Chris Wilson [Thu, 10 Dec 2020 23:07:41 +0000 (23:07 +0000)]
drm/i915/display: Go softly softly on initial modeset failure
Reduce the module/device probe error into a mere debug to hide issues
where the initial modeset is failing (after lies told by hw probe) and
the system hangs with a livelock in cleaning up the failed commit.
Reported-by: H.J. Lu <hjl.tools@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=210619 Fixes: b3bf99daaee9 ("drm/i915/display: Defer initial modeset until after GGTT is initialised") Fixes: ccc9e67ab26f ("drm/i915/display: Defer initial modeset until after GGTT is initialised") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: H.J. Lu <hjl.tools@gmail.com> Cc: Dave Airlie <airlied@redhat.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201210230741.17140-1-chris@chris-wilson.co.uk
Dave Airlie [Thu, 10 Dec 2020 23:47:38 +0000 (09:47 +1000)]
Merge tag 'drm-intel-fixes-2020-12-09' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Fixes for VDSC/DP, selftests, shmem_utils, preemption, submission, and gt reset:
- Check the correct variable in selftest (Dan)
- Propagate error from canceled submit due to context closure (Chris)
- Ignore repeated attempts to suspend request flow across reset (Chris)
- Cancel the preemption timeout on responding to it (Chris)
- Fix unsigned compared against 0 (Colin)
- Compute the correct slice count for VDSC on DP (Manasi)
- Declar gen9 has 64 mocs entries (Chris)
Dave Airlie [Thu, 10 Dec 2020 23:42:14 +0000 (09:42 +1000)]
Merge tag 'amd-drm-fixes-5.10-2020-12-09' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
amd-drm-fixes-5.10-2020-12-09:
amdgpu:
- Fan fix for CI asics
- Fix a warning in possible_crtcs
- Build fix for when debugfs is disabled
- Display overflow fix
- Display watermark fixes for Renoir
- SDMA 5.2 fix
- Stolen vga memory regression fix
- Power profile fixes
- Fix a regression from removal of GEM and PRIME callbacks
Linus Torvalds [Thu, 10 Dec 2020 23:36:09 +0000 (15:36 -0800)]
Merge tag 'nfs-for-5.10-3' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"Here are a handful more bugfixes for 5.10.
Unfortunately, we found some problems with the new READ_PLUS operation
that aren't easy to fix. We've decided to disable this codepath
through a Kconfig option for now, but a series of patches going into
5.11 will clean up the code and fix the issues at the same time. This
seemed like the best way to go about it.
Summary:
- Fix array overflow when flexfiles mirroring is enabled
- Fix rpcrdma_inline_fixup() crash with new LISTXATTRS
- Fix 5 second delay when doing inter-server copy
- Disable READ_PLUS by default"
* tag 'nfs-for-5.10-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Disable READ_PLUS by default
NFSv4.2: Fix 5 seconds delay when doing inter server copy
NFS: Fix rpcrdma_inline_fixup() crash with new LISTXATTRS operation
pNFS/flexfiles: Fix array overflow when flexfiles mirroring is enabled
2) Fix memory leak in xfrm_user_policy(). Fix from Yu Kuai.
3) Fix polling in xsk sockets by using sk_poll_wait() instead of
datagram_poll() which keys off of sk_wmem_alloc and such which xsk
sockets do not update. From Xuan Zhuo.
4) Missing init of rekey_data in cfgh80211, from Sara Sharon.
5) Fix destroy of timer before init, from Davide Caratti.
6) Missing CRYPTO_CRC32 selects in ethernet driver Kconfigs, from Arnd
Bergmann.
7) Missing error return in rtm_to_fib_config() switch case, from Zhang
Changzhong.
8) Fix some src/dest address handling in vrf and add a testcase. From
Stephen Suryaputra.
9) Fix multicast handling in Seville switches driven by mscc-ocelot
driver. From Vladimir Oltean.
10) Fix proto value passed to skb delivery demux in udp, from Xin Long.
11) HW pkt counters not reported correctly in enetc driver, from Claudiu
Manoil.
12) Fix deadlock in bridge, from Joseph Huang.
13) Missing of_node_pur() in dpaa2 driver, fromn Christophe JAILLET.
14) Fix pid fetching in bpftool when there are a lot of results, from
Andrii Nakryiko.
15) Fix long timeouts in nft_dynset, from Pablo Neira Ayuso.
16) Various stymmac fixes, from Fugang Duan.
17) Fix null deref in tipc, from Cengiz Can.
18) When mss is biog, coose more resonable rcvq_space in tcp, fromn Eric
Dumazet.
19) Revert a geneve change that likely isnt necessary, from Jakub
Kicinski.
20) Avoid premature rx buffer reuse in various Intel driversm from Björn
Töpel.
21) retain EcT bits during TIS reflection in tcp, from Wei Wang.
22) Fix Tso deferral wrt. cwnd limiting in tcp, from Neal Cardwell.
23) MPLS_OPT_LSE_LABEL attribute is 342 ot 8 bits, from Guillaume Nault
24) Fix propagation of 32-bit signed bounds in bpf verifier and add test
cases, from Alexei Starovoitov.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
selftests: fix poll error in udpgro.sh
selftests/bpf: Fix "dubious pointer arithmetic" test
selftests/bpf: Fix array access with signed variable test
selftests/bpf: Add test for signed 32-bit bound check bug
bpf: Fix propagation of 32-bit signed bounds from 64-bit bounds.
MAINTAINERS: Add entry for Marvell Prestera Ethernet Switch driver
net: sched: Fix dump of MPLS_OPT_LSE_LABEL attribute in cls_flower
net/mlx4_en: Handle TX error CQE
net/mlx4_en: Avoid scheduling restart task if it is already running
tcp: fix cwnd-limited bug for TSO deferral where we send nothing
net: flow_offload: Fix memory leak for indirect flow block
tcp: Retain ECT bits for tos reflection
ethtool: fix stack overflow in ethnl_parse_bitset()
e1000e: fix S0ix flow to allow S0i3.2 subset entry
ice: avoid premature Rx buffer reuse
ixgbe: avoid premature Rx buffer reuse
i40e: avoid premature Rx buffer reuse
igb: avoid transmit queue timeout in xdp path
igb: use xdp_do_flush
igb: skb add metasize for xdp
...
====================
add ppp_generic ioctl(s) to bridge channels
Following on from my previous RFC[1], this series adds two ioctl calls
to the ppp code to implement "channel bridging".
When two ppp channels are bridged, frames presented to ppp_input() on
one channel are passed to the other channel's ->start_xmit function for
transmission.
The primary use-case for this functionality is in an L2TP Access
Concentrator where PPP frames are typically presented in a PPPoE session
(e.g. from a home broadband user) and are forwarded to the ISP network in
a PPPoL2TP session.
The two new ioctls, PPPIOCBRIDGECHAN and PPPIOCUNBRIDGECHAN form a
symmetric pair.
Userspace code testing and illustrating use of the ioctl calls is
available in the go-l2tp[2] and l2tp-ktest[3] repositories.
v4:
* Fix NULL-pointer access in PPPIOCBRIDGECHAN in the case that the
ID of the channel to be bridged wasn't found.
* Add comment in ppp_unbridge_channels to better document the
unbridge process.
v3:
* Use rcu_dereference_protected for accessing struct channel
'bridge' field during updates with lock 'upl' held.
* Avoid race in ppp_unbridge_channels by ensuring that each channel
in the bridge points to it's peer before decrementing refcounts.
v2:
* Add missing __rcu annotation to struct channel 'bridge' field in
order to squash a sparse warning from a C=1 build
* Integrate review comments from gnault@redhat.com
* Have ppp_unbridge_channels return -EINVAL if the channel isn't
part of a bridge: this better aligns with the return code from
ppp_disconnect_channel.
* Improve docs update by including information on ioctl arguments
and error return codes.
====================
Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Parkin [Thu, 10 Dec 2020 15:50:57 +0000 (15:50 +0000)]
ppp: add PPPIOCBRIDGECHAN and PPPIOCUNBRIDGECHAN ioctls
This new ioctl pair allows two ppp channels to be bridged together:
frames arriving in one channel are transmitted in the other channel
and vice versa.
The practical use for this is primarily to support the L2TP Access
Concentrator use-case. The end-user session is presented as a ppp
channel (typically PPPoE, although it could be e.g. PPPoA, or even PPP
over a serial link) and is switched into a PPPoL2TP session for
transmission to the LNS. At the LNS the PPP session is terminated in
the ISP's network.
When a PPP channel is bridged to another it takes a reference on the
other's struct ppp_file. This reference is dropped when the channels
are unbridged, which can occur either explicitly on userspace calling
the PPPIOCUNBRIDGECHAN ioctl, or implicitly when either channel in the
bridge is unregistered.
In order to implement the channel bridge, struct channel is extended
with a new field, 'bridge', which points to the other struct channel
making up the bridge.
This pointer is RCU protected to avoid adding another lock to the data
path.
To guard against concurrent writes to the pointer, the existing struct
channel lock 'upl' coverage is extended rather than adding a new lock.
The 'upl' lock is used to protect the existing unit pointer. Since the
bridge effectively replaces the unit (they're mutually exclusive for a
channel) it makes coding easier to use the same lock to cover them
both.
Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Anna Schumaker [Thu, 3 Dec 2020 20:18:39 +0000 (15:18 -0500)]
NFS: Disable READ_PLUS by default
We've been seeing failures with xfstests generic/091 and generic/263
when using READ_PLUS. I've made some progress on these issues, and the
tests fail later on but still don't pass. Let's disable READ_PLUS by
default until we can work out what is going on.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Dai Ngo [Tue, 24 Nov 2020 03:15:17 +0000 (22:15 -0500)]
NFSv4.2: Fix 5 seconds delay when doing inter server copy
Since commit b4868b44c5628 ("NFSv4: Wait for stateid updates after
CLOSE/OPEN_DOWNGRADE"), every inter server copy operation suffers 5
seconds delay regardless of the size of the copy. The delay is from
nfs_set_open_stateid_locked when the check by nfs_stateid_is_sequential
fails because the seqid in both nfs4_state and nfs4_stateid are 0.
Fix __nfs42_ssc_open to delay setting of NFS_OPEN_STATE in nfs4_state,
until after the call to update_open_stateid, to indicate this is the 1st
open. This fix is part of a 2 patches, the other patch is the fix in the
source server to return the stateid for COPY_NOTIFY request with seqid 1
instead of 0.
Fixes: ce0887ac96d3 ("NFSD add nfs4 inter ssc to nfsd4_copy") Signed-off-by: Dai Ngo <dai.ngo@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 25 Nov 2020 00:15:18 +0000 (19:15 -0500)]
NFS: Fix rpcrdma_inline_fixup() crash with new LISTXATTRS operation
By switching to an XFS-backed export, I am able to reproduce the
ibcomp worker crash on my client with xfstests generic/013.
For the failing LISTXATTRS operation, xdr_inline_pages() is called
with page_len=12 and buflen=128.
- When ->send_request() is called, rpcrdma_marshal_req() does not
set up a Reply chunk because buflen is smaller than the inline
threshold. Thus rpcrdma_convert_iovs() does not get invoked at
all and the transport's XDRBUF_SPARSE_PAGES logic is not invoked
on the receive buffer.
- During reply processing, rpcrdma_inline_fixup() tries to copy
received data into rq_rcv_buf->pages because page_len is positive.
But there are no receive pages because rpcrdma_marshal_req() never
allocated them.
The result is that the ibcomp worker faults and dies. Sometimes that
causes a visible crash, and sometimes it results in a transport hang
without other symptoms.
RPC/RDMA's XDRBUF_SPARSE_PAGES support is not entirely correct, and
should eventually be fixed or replaced. However, my preference is
that upper-layer operations should explicitly allocate their receive
buffers (using GFP_KERNEL) when possible, rather than relying on
XDRBUF_SPARSE_PAGES.
Reported-by: Olga kornievskaia <kolga@netapp.com> Suggested-by: Olga kornievskaia <kolga@netapp.com> Fixes: c10a75145feb ("NFSv4.2: add the extended attribute proc functions.") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Olga kornievskaia <kolga@netapp.com> Reviewed-by: Frank van der Linden <fllinden@amazon.com> Tested-by: Olga kornievskaia <kolga@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The code was developed and tested on an MSC313E SoC, which seems to be
half-way between the AT91RM9200 and the AT91SAM9260 in that it supports
both the 2-descriptors mode and a Tx ring.
It turns out that after the code was merged I could notice that the
controller would sometimes lock up, and only when dealing with sustained
bidirectional transfers, in which case it would report a Tx overrun
condition right after having reported being ready, and will stop sending
even after the status is cleared (a down/up cycle fixes it though).
After adding lots of traces I couldn't spot a sequence pattern allowing
to predict that this situation would happen. The chip comes with no
documentation and other bits are often reported with no conclusive
pattern either.
It is possible that my change is wrong just like it is possible that
the controller on the chip is bogus or at least unpredictable based on
existing docs from other chips. I do not have an RM9200 at hand to test
at the moment and a few tests run on a more recent 9G20 indicate that
this code path cannot be used there to test the code on a 3rd platform.
Since the MSC313E works fine in the single-descriptor mode, and that
people using the old RM9200 very likely favor stability over performance,
better revert this patch until we can test it on the original platform
this part of the driver was written for. Note that the reverted patch
was actually tested on MSC313E.
Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Daniel Palmer <daniel@0x0f.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/netdev/20201206092041.GA10646@1wt.eu/ Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
net: qualcomm: rmnet: Update rmnet device MTU based on real device
Packets sent by rmnet to the real device have variable MAP header
lengths based on the data format configured. This patch adds checks
to ensure that the real device MTU is sufficient to transmit the MAP
packet comprising of the MAP header and the IP packet. This check
is enforced when rmnet devices are created and updated and during
MTU updates of both the rmnet and real device.
Additionally, rmnet devices now have a default MTU configured which
accounts for the real device MTU and the headroom based on the data
format.
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org> Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Tested-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Wed, 9 Dec 2020 11:21:13 +0000 (12:21 +0100)]
selftests: fix poll error in udpgro.sh
The test program udpgso_bench_rx always invokes the poll()
syscall with a timeout of 10ms. If a larger timeout is specified
via the command line, udpgso_bench_rx is supposed to do multiple
poll() calls till the timeout is expired or an event is received.
Currently the poll() loop errors out after the first invocation with
no events, and may causes self-tests failure alike:
This change addresses the issue allowing the poll() loop to consume
all the configured timeout.
Fixes: ada641ff6ed3 ("selftests: fixes for UDP GRO") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xie He [Tue, 8 Dec 2020 22:50:44 +0000 (14:50 -0800)]
net: lapbether: Consider it successful if (dis)connecting when already (dis)connected
When the upper layer instruct us to connect (or disconnect), but we have
already connected (or disconnected), consider this operation successful
rather than failed.
This can help the upper layer to correct its record about whether we are
connected or not here in layer 2.
The upper layer may not have the correct information about whether we are
connected or not. This can happen if this driver has already been running
for some time when the "x25" module gets loaded.
Another X.25 driver (hdlc_x25) is already doing this, so we make this
driver do this, too.
Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Acked-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Sasha Neftin [Thu, 10 Dec 2020 19:08:12 +0000 (11:08 -0800)]
igc: Add new device ID
Add new device ID for the next step of the silicon and
reflect the I226_K part.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jean-Philippe Brucker [Tue, 8 Dec 2020 18:01:54 +0000 (19:01 +0100)]
selftests/bpf: Fix "dubious pointer arithmetic" test
The verifier trace changed following a bugfix. After checking the 64-bit
sign, only the upper bit mask is known, not bit 31. Update the test
accordingly.
Jean-Philippe Brucker [Tue, 8 Dec 2020 18:01:52 +0000 (19:01 +0100)]
selftests/bpf: Add test for signed 32-bit bound check bug
After a 32-bit load followed by a branch, the verifier would reduce the
maximum bound of the register to 0x7fffffff, allowing a user to bypass
bound checks. Ensure such a program is rejected.
In the second test, the 64-bit compare should not sufficient to
determine whether the signed 32-bit lower bound is 0, so the verifier
should reject the second branch.
A prior patch increased the size of struct tcp_zerocopy_receive
but did not update do_tcp_getsockopt() handling to properly account
for this.
This patch simply reintroduces content erroneously cut from the
referenced prior patch that handles the new struct size.
Fixes: 18fb76ed5386 ("net-zerocopy: Copy straggler unaligned data for TCP Rx. zerocopy.") Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Tue, 8 Dec 2020 18:01:51 +0000 (19:01 +0100)]
bpf: Fix propagation of 32-bit signed bounds from 64-bit bounds.
The 64-bit signed bounds should not affect 32-bit signed bounds unless the
verifier knows that upper 32-bits are either all 1s or all 0s. For example the
register with smin_value==1 doesn't mean that s32_min_value is also equal to 1,
since smax_value could be larger than 32-bit subregister can hold.
The verifier refines the smax/s32_max return value from certain helpers in
do_refine_retval_range(). Teach the verifier to recognize that smin/s32_min
value is also bounded. When both smin and smax bounds fit into 32-bit
subregister the verifier can propagate those bounds.
here's a pull request of 7 patches for net-next/master.
The first patch is by Oliver Hartkopp for the CAN ISOTP, which adds support for
functional addressing.
A patch by Antonio Quartulli removes an unneeded unlikely() annotation from the
rx-offload helper.
The next three patches target the m_can driver. Sean Nyekjaers's patch removes
a double clearing of clock stop request bit, Patrik Flykt's patch moves the
runtime PM enable/disable to m_can_platform and Jarkko Nikula's patch adds a
PCI glue code driver.
Fabio Estevam's patch converts the flexcan driver to DT only.
And Manivannan Sadhasivam's patchd for the mcp251xfd driver adds internal
loopback mode support.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Antonio Quartulli [Thu, 10 Dec 2020 08:55:49 +0000 (09:55 +0100)]
vxlan: avoid double unlikely() notation when using IS_ERR()
The definition of IS_ERR() already applies the unlikely() notation
when checking the error status of the passed pointer. For this
reason there is no need to have the same notation outside of
IS_ERR() itself.
Clean up code by removing redundant notation.
Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 10 Dec 2020 19:00:27 +0000 (11:00 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Two user triggerable crashers and a some EFA related regressions:
- Syzkaller found a bug in CM
- Restore access to the GID table and fix modify_qp for EFA
- Crasher in qedr"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait
RDMA/core: Fix empty gid table for non IB/RoCE devices
RDMA/efa: Use the correct current and new states in modify QP
RDMA/qedr: iWARP invalid(zero) doorbell address fix
Linus Torvalds [Thu, 10 Dec 2020 18:48:49 +0000 (10:48 -0800)]
Merge tag 'media/v5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"A couple of fixes:
- videobuf2: fix a DMABUF bug, preventing it to properly handle cache
sync/flush
- vidtv: an usage after free and a few sparse/smatch warning fixes
- pulse8-cec: a duplicate free and a bug related to new firmware
usage
- mtk-cir: fix a regression on a clock setting"
* tag 'media/v5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: vidtv: fix some warnings
media: vidtv: fix kernel-doc markups
media: [next] media: vidtv: fix a read from an object after it has been freed
media: vb2: set cache sync hints when init buffers
media: pulse8-cec: add support for FW v10 and up
media: pulse8-cec: fix duplicate free at disconnect or probe error
media: mtk-cir: fix calculation of chk period
Fabio Estevam [Sat, 28 Nov 2020 13:28:55 +0000 (10:28 -0300)]
can: flexcan: convert the driver to DT-only
The flexcan driver runs only on DT platforms, so simplify the code by using
of_device_get_match_data() to retrieve the driver data and also by removing the
unused id_table.
Jarkko Nikula [Tue, 17 Nov 2020 16:08:27 +0000 (18:08 +0200)]
can: m_can: add PCI glue driver for Intel Elkhart Lake
Add support for M_CAN controller on Intel Elkhart Lake attached to the PCI bus.
It integrates the Bosch M_CAN controller with Message RAM and the wrapper IP
block with additional registers which all of them are within the same MMIO
range.
Currently only interrupt control register from wrapper IP is used and the MRAM
configuration is expected to come from the firmware via "bosch,mram-cfg" device
property and parsed by m_can.c core.
Initial implementation is done by Felipe Balbi while he was working at Intel
with later changes from Raymond Tan and me.
Co-developed-by: Felipe Balbi (Intel) <balbi@kernel.org> Co-developed-by: Raymond Tan <raymond.tan@intel.com> Signed-off-by: Felipe Balbi (Intel) <balbi@kernel.org> Signed-off-by: Raymond Tan <raymond.tan@intel.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20201117160827.3636264-1-jarkko.nikula@linux.intel.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Patrik Flykt [Fri, 23 Oct 2020 11:58:00 +0000 (14:58 +0300)]
can: m_can: move runtime PM enable/disable to m_can_platform
This is a preparatory patch for upcoming PCI based M_CAN devices. The current
PM implementation would cause PCI based drivers to enable PM twice, once when
the PCI device is added and a second time in m_can_class_register(). This will
cause 'Unbalanced pm_runtime_enable!' to be logged, and is a situation that
should be avoided.
Therefore, in anticipation of PCI devices, move PM enabling out from M_CAN
class registration to its only user, the m_can_platform driver.
Antonio Quartulli [Thu, 10 Dec 2020 08:53:21 +0000 (09:53 +0100)]
can: rx-offload: can_rx_offload_offload_one(): avoid double unlikely() notation when using IS_ERR()
The definition of IS_ERR() already applies the unlikely() notation when
checking the error status of the passed pointer. For this reason there is no
need to have the same notation outside of IS_ERR() itself.
Oliver Hartkopp [Sun, 6 Dec 2020 14:47:31 +0000 (15:47 +0100)]
can: isotp: add SF_BROADCAST support for functional addressing
When CAN_ISOTP_SF_BROADCAST is set in the CAN_ISOTP_OPTS flags the CAN_ISOTP
socket is switched into functional addressing mode, where only single frame
(SF) protocol data units can be send on the specified CAN interface and the
given tp.tx_id after bind().
In opposite to normal and extended addressing this socket does not register a
CAN-ID for reception which would be needed for a 1-to-1 ISOTP connection with a
segmented bi-directional data transfer.
Sending SFs on this socket is therefore a TX-only 'broadcast' operation.
Damien Le Moal [Wed, 9 Dec 2020 11:16:10 +0000 (20:16 +0900)]
zonefs: fix page reference and BIO leak
In zonefs_file_dio_append(), the pages obtained using
bio_iov_iter_get_pages() are not released on completion of the
REQ_OP_APPEND BIO, nor when bio_iov_iter_get_pages() fails.
Furthermore, a call to bio_put() is missing when
bio_iov_iter_get_pages() fails.
Fix these resource leaks by adding BIO resource release code (bio_put()i
and bio_release_pages()) at the end of the function after the BIO
execution and add a jump to this resource cleanup code in case of
bio_iov_iter_get_pages() failure.
While at it, also fix the call to task_io_account_write() to be passed
the correct BIO size instead of bio_iov_iter_get_pages() return value.
Reported-by: Christoph Hellwig <hch@lst.de> Fixes: 02ef12a663c7 ("zonefs: use REQ_OP_ZONE_APPEND for sync DIO") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: 61aec25a6db5 ("cls_flower: Support filtering on multiple MPLS Label Stack Entries") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Guojia Liao [Thu, 10 Dec 2020 03:42:12 +0000 (11:42 +0800)]
net: hns3: adjust rss tc mode configure command
For the max rss size of PF may be up to 512, the max queue
number of single tc may be up to 512 too. For the total queue
numbers may be up to 1280, so the queue offset of each tc may
be more than 1024. So adjust the rss tc mode configuration
command, including extend tc size field from 10 bits to 11
bits, and extend tc size field from 3 bits to 4 bits.
Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
For the max rss size of PF may be up to 512, so adjust the
command of configuring rss indirection table to support
queue id larger than 255. The width of queue id is extended
from 8 bits to 10 bits. The high 2 bits are stored in filed
rss_qid_h when the queue id is larger than 255.
Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Guojia Liao [Thu, 10 Dec 2020 03:42:10 +0000 (11:42 +0800)]
net: hns3: add support for max 512 rss size
Currently, the driver gets the max rss size from configuration
file when initialization. Both the PF and VF share the same
max rss size, and no more than 128.
For DEVICE_VERSION_V3, the max rss size for PF can be up to
512, so there is a new field in configuration file to store it,
the old filed is used for VF.
To be compatible with boards using old configure file, the PF
will use the old filed if the one is zero.
For the rss size may be larger than 256, so the type of
rss_indirection_tbl of struct hclge_vport should be changed to
u16 as well.
Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Thu, 10 Dec 2020 03:42:09 +0000 (11:42 +0800)]
net: hns3: add support for hw tc offload of tc flower
Some new device supports forwarding packet to queues of specified
TC when flow director rule hit. So add support to configure flow
director rule by tc flower. To avoid rule conflict, add a new flow
director mode HCLGE_FD_TC_FLOWER_ACTIVE, and only one mode can be
active at the same time.
Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Thu, 10 Dec 2020 03:42:08 +0000 (11:42 +0800)]
net: hns3: add support for forwarding packet to queues of specified TC when flow director rule hit
For some new device, it supports forwarding packet to queues
of specified TC when flow director rule hit. So extend the
command handle to support it.
Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Thu, 10 Dec 2020 03:42:07 +0000 (11:42 +0800)]
net: hns3: add support for tc mqprio offload
Currently, the HNS3 driver only supports offload for tc number
and prio_tc. This patch adds support for other qopts, including
queues count and offset for each tc.
When enable tc mqprio offload, it's not allowed to change
queue numbers by ethtool. For hardware limitation, the queue
number of each tc should be power of 2.
For the queues is not assigned to each tc by average, so it's
should return vport->alloc_tqps for hclge_get_max_channels().
Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Thu, 10 Dec 2020 03:42:06 +0000 (11:42 +0800)]
net: hns3: refine the struct hane3_tc_info
Currently, there are multiple members related to tc information
in struct hnae3_knic_private_info. Merge them into a new struct
hnae3_tc_info.
Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 9 Dec 2020 16:18:21 +0000 (08:18 -0800)]
nfp: silence set but not used warning with IPV6=n
Test robot reports:
drivers/net/ethernet/netronome/nfp/crypto/tls.c: In function 'nfp_net_tls_rx_resync_req':
drivers/net/ethernet/netronome/nfp/crypto/tls.c:477:18: warning: variable 'ipv6h' set but not used [-Wunused-but-set-variable]
477 | struct ipv6hdr *ipv6h;
| ^~~~~
In file included from include/linux/compiler_types.h:65,
from <command-line>:
drivers/net/ethernet/netronome/nfp/crypto/tls.c: In function 'nfp_net_tls_add':
include/linux/compiler_attributes.h:208:41: warning: statement will never be executed [-Wswitch-unreachable]
208 | # define fallthrough __attribute__((__fallthrough__))
| ^~~~~~~~~~~~~
drivers/net/ethernet/netronome/nfp/crypto/tls.c:299:3: note: in expansion of macro 'fallthrough'
299 | fallthrough;
| ^~~~~~~~~~~
Use the IPv6 header in the switch, it doesn't matter which header
we use to read the version field.
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
Add support for VSOL V2801F/CarlitoxxPro CPGOS03 GPON module
This patch set adds support for the V2801F / CarlitoxxPro module. This
requires two changes:
1) the module only supports single byte reads to the ID EEPROM,
while we need to still permit sequential reads to the diagnostics
EEPROM for atomicity reasons.
2) we need to relax the encoding check when we have no reported
capabilities to allow 1000base-X based on the module bitrate.
Thanks to Pali Rohár for responsive testing over the last two days.
(Resending, dropping the utf-8 characters in Pali's name so the patches
get through vger. Added Andrew's r-b tags.)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Wed, 9 Dec 2020 11:22:54 +0000 (11:22 +0000)]
net: sfp: relax bitrate-derived mode check
Do not check the encoding when deriving 1000BASE-X from the bitrate
when no other modes are discovered. Some GPON modules (VSOL V2801F
and CarlitoxxPro CPGOS03-0490 v2.0) indicate NRZ encoding with a
1200Mbaud bitrate, but should be driven with 1000BASE-X on the host
side.
Tested-by: Pali Rohár <pali@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Add a workaround for the detection of VSOL V2801F / CarlitoxxPro
CPGOS03-0490 v2.0 GPON module which CarlitoxxPro states needs single
byte I2C reads to the EEPROM.
Pali Rohár reports that he also has a CarlitoxxPro-based V2801F module,
which reports a manufacturer of "OEM". This manufacturer can't be
matched as it appears in many different modules, so also match the part
number too.
Reported-by: Thomas Schreiber <tschreibe@gmail.com> Reported-by: Pali Rohár <pali@kernel.org> Tested-by: Pali Rohár <pali@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Xie He [Wed, 9 Dec 2020 08:16:04 +0000 (00:16 -0800)]
net: x25: Fix handling of Restart Request and Restart Confirmation
1. When the x25 module gets loaded, layer 2 may already be running and
connected. In this case, although we are in X25_LINK_STATE_0, we still
need to handle the Restart Request received, rather than ignore it.
2. When we are in X25_LINK_STATE_2, we have already sent a Restart Request
and is waiting for the Restart Confirmation with t20timer. t20timer will
restart itself repeatedly forever so it will always be there, as long as we
are in State 2. So we don't need to check x25_t20timer_pending again.
Fixes: d023b2b9ccc2 ("net/x25: fix restart request/confirm handling") Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Acked-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Wed, 9 Dec 2020 11:03:31 +0000 (12:03 +0100)]
mptcp: be careful on subflows shutdown
When the workqueue disposes of the msk, the subflows can still
receive some data from the peer after __mptcp_close_ssk()
completes.
The above could trigger a race between the msk receive path and the
msk destruction. Acquiring the mptcp_data_lock() in __mptcp_destroy_sock()
will not save the day: the rx path could be reached even after msk
destruction completes.
Instead use the subflow 'disposable' flag to prevent entering
the msk receive path after __mptcp_close_ssk().
Fixes: e16163b6e2b7 ("mptcp: refactor shutdown and close") Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Wed, 9 Dec 2020 11:03:30 +0000 (12:03 +0100)]
mptcp: plug subflow context memory leak
When a MPTCP listener socket is closed with unaccepted
children pending, the ULP release callback will be invoked,
but nobody will call into __mptcp_close_ssk() on the
corresponding subflow.
As a consequence, at ULP release time, the 'disposable' flag
will be cleared and the subflow context memory will be leaked.
This change addresses the issue always freeing the context if
the subflow is still in the accept queue at ULP release time.
Additionally, this fixes an incorrect code reference in the
related comment.
Note: this fix leverages the changes introduced by the previous
commit.
Fixes: e16163b6e2b7 ("mptcp: refactor shutdown and close") Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 0397c6d85f9c ("mptcp: keep unaccepted MPC subflow into
join list"), the msk's workqueue and/or PM can touch the MPC
subflow - and acquire its socket lock - even if it's still unaccepted.
If the above event races with the relevant listener socket close, we
can end-up with the above splat.
This change addresses the issue delaying the MPC socket insertion
in conn_list at accept time - that is, partially reverting the
blamed commit.
We must additionally ensure that mptcp_pm_fully_established()
happens after accept() time, or the PM will not be able to
handle properly such event - conn_list could be empty otherwise.
In the receive path, we check the subflow list node to ensure
it is out of the listener queue. Be sure client subflows do
not match transiently such condition moving them into the join
list earlier at creation time.
Since we now have multiple mptcp_pm_fully_established() call sites
from different code-paths, said helper can now race with itself.
Use an additional PM status bit to avoid multiple notifications.
Reported-by: Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/103 Fixes: 0397c6d85f9c ("mptcp: keep unaccepted MPC subflow into join list"), Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1. In x25_xmit, skb_reset_network_header is not necessary before we call
lapb_data_request. The lapb module doesn't need skb->network_header.
So there is no need to set skb->network_header before calling
lapb_data_request.
2. In x25_data_indication (called by the lapb module after data have
been received), skb_reset_network_header is not necessary before we
call netif_rx. After we call netif_rx, the code in net/core/dev.c will
call skb_reset_network_header before handing the skb to upper layers
(in __netif_receive_skb_core, called by __netif_receive_skb_one_core,
called by __netif_receive_skb, called by process_backlog). So we don't
need to call skb_reset_network_header by ourselves.
Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dwip N. Banerjee [Thu, 10 Dec 2020 01:53:31 +0000 (20:53 -0500)]
ibmvnic: fix rx buffer tracking and index management in replenish_rx_pool partial success
We observed that in the error case for batched send_subcrq_indirect() the
driver does not account for the partial success case. This caused Linux to
crash when free_map and pool index are inconsistent.
Driver needs to update the rx pools "available" count when some batched
sends worked but an error was encountered as part of the whole operation.
Also track replenish_add_buff_failure for statistic purposes.
Fixes: 4f0b6812e9b9a ("ibmvnic: Introduce batched RX buffer descriptor transmission") Signed-off-by: Dwip N. Banerjee <dnbanerg@us.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
mptcp: Add port parameter to ADD_ADDR option
The ADD_ADDR MPTCP option is used to announce available IP addresses
that a peer may connect to when adding more TCP subflows to an existing
MPTCP connection. There is an optional port number field in that
ADD_ADDR header, and this patch set adds capability for that port number
to be sent and received.
Patches 1, 2, and 4 refactor existing ADD_ADDR code to simplify implementation
of port number support.
Patches 3 and 5 are the main functional changes, for sending and
receiving the port number in the MPTCP ADD_ADDR option.
Patch 6 sends the ADD_ADDR option with port number on a bare TCP ACK,
since the extra length of the option may run in to cases where
sufficient TCP option space is not available on a data packet.
Patch 7 plumbs in port number support for the in-kernel MPTCP path
manager.
Patches 8-11 add some optional debug output and a little more cleanup
refactoring.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Wed, 9 Dec 2020 23:51:28 +0000 (15:51 -0800)]
mptcp: use the variable sk instead of open-coding
Since the local variable sk has been defined, use it instead of
open-coding.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Wed, 9 Dec 2020 23:51:27 +0000 (15:51 -0800)]
mptcp: rename add_addr_signal and mptcp_add_addr_status
Since the RM_ADDR signal had been reused with add_addr_signal, it's not
suitable to call it add_addr_signal or mptcp_add_addr_status. So this
patch renamed add_addr_signal to addr_signal, and renamed
mptcp_add_addr_status to mptcp_addr_signal_status.
Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Wed, 9 Dec 2020 23:51:26 +0000 (15:51 -0800)]
mptcp: drop rm_addr_signal flag
This patch reused add_addr_signal for the RM_ADDR announcing signal, by
defining a new ADD_ADDR status named MPTCP_RM_ADDR_SIGNAL. Then the flag
rm_addr_signal in PM could be dropped.
Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Wed, 9 Dec 2020 23:51:25 +0000 (15:51 -0800)]
mptcp: print out port and ahmac when receiving ADD_ADDR
This patch printed out more debugging information for the ADD_ADDR
suboption parsing on the incoming path.
Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Wed, 9 Dec 2020 23:51:24 +0000 (15:51 -0800)]
mptcp: add port parameter for mptcp_pm_announce_addr
This patch added a new parameter 'port' for mptcp_pm_announce_addr. If
this parameter is true, we set the MPTCP_ADD_ADDR_PORT bit of the
add_addr_signal. That means the announced address is added with a port
number.
Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Wed, 9 Dec 2020 23:51:23 +0000 (15:51 -0800)]
mptcp: send out dedicated packet for ADD_ADDR using port
The process is similar to that of the ADD_ADDR IPv6, this patch also sent
out a pure ack for the ADD_ADDR using port.
Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Wed, 9 Dec 2020 23:51:22 +0000 (15:51 -0800)]
mptcp: add the outgoing ADD_ADDR port support
This patch added a new add_addr_signal type named MPTCP_ADD_ADDR_PORT,
to identify it is an address with port to be added.
It also added a new parameter 'port' for both mptcp_add_addr_len and
mptcp_pm_add_addr_signal.
In mptcp_established_options_add_addr, we check whether the announced
address is added with port. If it is, we put this port number to
mptcp_out_options's port field.
Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / users / jedix / linux-maple.git / log