pipe_buffer might refer to a compound page (and contain more than a PAGE_SIZE
worth of data). Theoretically it had been possible since way back, but
nfsd_splice_actor() hadn't run into that until copy_page_to_iter() change.
Fortunately, the only thing that changes for compound pages is that we
need to stuff each relevant subpage in and convert the offset into offset
in the first subpage.
Acked-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Fixes: f0f6b614f83d "copy_page_to_iter(): don't split high-order page in case of ITER_PIPE" Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
A recent patch moved ACL setting into nfsd_setattr().
Unfortunately it didn't work as nfsd_setattr() aborts early if
iap->ia_valid is 0.
Remove this test, and instead avoid calling notify_change() when
ia_valid is 0.
This means that nfsd_setattr() will now *always* lock the inode.
Previously it didn't if only a ATTR_MODE change was requested on a
symlink (see Commit 15b7a1b86d66 ("[PATCH] knfsd: fix setattr-on-symlink
error return")). I don't think this change really matters.
Fixes: c0cbe70742f4 ("NFSD: add posix ACLs to struct nfsd_attrs") Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
As all inode locking is now fully balanced, fh_put() does not need to
call fh_unlock().
fh_lock() and fh_unlock() are no longer used, so discard them.
These are the only real users of ->fh_locked, so discard that too.
Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When locking a file to access ACLs and xattrs etc, use explicit locking
with inode_lock() instead of fh_lock(). This means that the calls to
fh_fill_pre/post_attr() are also explicit which improves readability and
allows us to place them only where they are needed. Only the xattr
calls need pre/post information.
When locking a file we don't need I_MUTEX_PARENT as the file is not a
parent of anything, so we can use inode_lock() directly rather than the
inode_lock_nested() call that fh_lock() uses.
Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When creating or unlinking a name in a directory use explicit
inode_lock_nested() instead of fh_lock(), and explicit calls to
fh_fill_pre_attrs() and fh_fill_post_attrs(). This is already done
for renames, with lock_rename() as the explicit locking.
Also move the 'fill' calls closer to the operation that might change the
attributes. This way they are avoided on some error paths.
For the v2-only code in nfsproc.c, the fill calls are not replaced as
they aren't needed.
Making the locking explicit will simplify proposed future changes to
locking for directories. It also makes it easily visible exactly where
pre/post attributes are used - not all callers of fh_lock() actually
need the pre/post attributes.
Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
nfsd_lookup() takes an exclusive lock on the parent inode, but no
callers want the lock and it may not be needed at all if the
result is in the dcache.
Change nfsd_lookup_dentry() to not take the lock, and call
lookup_one_len_locked() which takes lock only if needed.
nfsd4_open() currently expects the lock to still be held, but that isn't
necessary as nfsd_validate_delegated_dentry() provides required
guarantees without the lock.
NOTE: NFSv4 requires directory changeinfo for OPEN even when a create
wasn't requested and no change happened. Now that nfsd_lookup()
doesn't use fh_lock(), we need to explicitly fill the attributes
when no create happens. A new fh_fill_both_attrs() is provided
for that task.
Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
On non-error paths, nfsd_link() calls fh_unlock() twice. This is safe
because fh_unlock() records that the unlock has been done and doesn't
repeat it.
However it makes the code a little confusing and interferes with changes
that are planned for directory locking.
So rearrange the code to ensure fh_unlock() is called exactly once if
fh_lock() was called.
Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Some error paths in nfsd_unlink() allow it to exit without unlocking the
directory. This is not a problem in practice as the directory will be
locked with an fh_put(), but it is untidy and potentially confusing.
This allows us to remove all the fh_unlock() calls that are immediately
after nfsd_unlink() calls.
Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
nfsd_create() usually returns with the directory still locked.
nfsd_symlink() usually returns with it unlocked. This is clumsy.
Until recently nfsd_create() needed to keep the directory locked until
ACLs and security label had been set. These are now set inside
nfsd_create() (in nfsd_setattr()) so this need is gone.
So change nfsd_create() and nfsd_symlink() to always unlock, and remove
any fh_unlock() calls that follow calls to these functions.
Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
pacl and dpacl pointers are added to struct nfsd_attrs, which requires
that we have an nfsd_attrs_free() function to free them.
Those nfsv4 functions that can set ACLs now set up these pointers
based on the passed in NFSv4 ACL.
nfsd_setattr() sets the acls as appropriate.
Errors are handled as with security labels.
Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
nfsd_setattr() now sets a security label if provided, and nfsv4 provides
it in the 'open' and 'create' paths and the 'setattr' path.
If setting the label failed (including because the kernel doesn't
support labels), an error field in 'struct nfsd_attrs' is set, and the
caller can respond. The open/create callers clear
FATTR4_WORD2_SECURITY_LABEL in the returned attr set in this case.
The setattr caller returns the error.
Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The NFS protocol includes attributes when creating symlinks.
Linux does store attributes for symlinks and allows them to be set,
though they are not used for permission checking.
NFSD currently doesn't set standard (struct iattr) attributes when
creating symlinks, but for NFSv4 it does set ACLs and security labels.
This is inconsistent.
To improve consistency, pass the provided attributes into nfsd_symlink()
and call nfsd_create_setattr() to set them.
NOTE: this results in a behaviour change for all NFS versions when the
client sends non-default attributes with a SYMLINK request. With the
Linux client, the only attributes are:
attr.ia_mode = S_IFLNK | S_IRWXUGO;
attr.ia_valid = ATTR_MODE;
so the final outcome will be unchanged. Other clients might sent
different attributes, and if they did they probably expect them to be
honoured.
We ignore any error from nfsd_create_setattr(). It isn't really clear
what should be done if a file is successfully created, but the
attributes cannot be set. NFS doesn't allow partial success to be
reported. Reporting failure is probably more misleading than reporting
success, so the status is ignored.
Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The attributes that nfsd might want to set on a file include 'struct
iattr' as well as an ACL and security label.
The latter two are passed around quite separately from the first, in
part because they are only needed for NFSv4. This leads to some
clumsiness in the code, such as the attributes NOT being set in
nfsd_create_setattr().
We need to keep the directory locked until all attributes are set to
ensure the file is never visibile without all its attributes. This need
combined with the inconsistent handling of attributes leads to more
clumsiness.
As a first step towards tidying this up, introduce 'struct nfsd_attrs'.
This is passed (by reference) to vfs.c functions that work with
attributes, and is assembled by the various nfs*proc functions which
call them. As yet only iattr is included, but future patches will
expand this.
Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Between opening a file and setting a delegation on it, someone could
rename or unlink the dentry. If this happens, we do not want to grant a
delegation on the open.
On a CLAIM_NULL open, we're opening by filename, and we may (in the
non-create case) or may not (in the create case) be holding i_rwsem
when attempting to set a delegation. The latter case allows a
race.
After getting a lease, redo the lookup of the file being opened and
validate that the resulting dentry matches the one in the open file
description.
To properly redo the lookup we need an rqst pointer to pass to
nfsd_lookup_dentry(), so make sure that is available.
Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Currently, we pass the fh of the opened file down through several
functions so that alloc_init_deleg can pass it to delegation_blocked.
The filehandle of the open file is available in the nfs4_file however,
so there's no need to pass it in a separate argument.
Drop the argument from alloc_init_deleg, nfs4_open_delegation and
nfs4_set_delegation.
Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactor so that CB_OFFLOAD arguments can be passed without
allocating a whole struct nfsd4_copy object. On my system (x86_64)
this removes another 96 bytes from struct nfsd4_copy.
[ cel: adjusted to apply to v5.15.y ] Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactor: Now that nfsd4_do_copy() no longer calls the cleanup
helpers, plumb the use of struct file pointers all the way down to
_nfsd_copy_file_range().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Move the nfsd4_cleanup_*() call sites out of nfsd4_do_copy(). A
subsequent patch will modify one of the new call sites to avoid
the need to manufacture the phony struct nfsd_file.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The @src parameter is sometimes a pointer to a struct nfsd_file and
sometimes a pointer to struct file hiding in a phony struct
nfsd_file. Refactor nfsd4_cleanup_inter_ssc() so the @src parameter
is always an explicit struct file.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
In function ‘strncpy’,
inlined from ‘nfsd4_ssc_setup_dul’ at /home/cel/src/linux/manet/fs/nfsd/nfs4proc.c:1392:3,
inlined from ‘nfsd4_interssc_connect’ at /home/cel/src/linux/manet/fs/nfsd/nfs4proc.c:1489:11:
/home/cel/src/linux/manet/include/linux/fortify-string.h:52:33: warning: ‘__builtin_strncpy’ specified bound 63 equals destination size [-Wstringop-truncation]
52 | #define __underlying_strncpy __builtin_strncpy
| ^
/home/cel/src/linux/manet/include/linux/fortify-string.h:89:16: note: in expansion of macro ‘__underlying_strncpy’
89 | return __underlying_strncpy(p, q, size);
| ^~~~~~~~~~~~~~~~~~~~
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
write_bytes_to_xdr_buf() is pretty expensive to use for inserting
an XDR data item that is always 1 XDR_UNIT at an address that is
always XDR word-aligned.
Since both the readv and splice read paths encode EOF and maxcount
values, move both to a common code path.
Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
write_bytes_to_xdr_buf() is a generic way to place a variable-length
data item in an already-reserved spot in the encoding buffer.
However, it is costly. In nfsd4_encode_fattr(), it is unnecessary
because the data item is fixed in size and the buffer destination
address is always word-aligned.
Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
write_bytes_to_xdr_buf() is a generic way to place a variable-length
data item in an already-reserved spot in the encoding buffer.
However, it is costly, and here, it is unnecessary because the
data item is fixed in size, the buffer destination address is
always word-aligned, and the destination location is already in
@p.
Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This printk pops every time nfsd.ko gets plugged in. Most kmods don't do
that and this one is not very informative. Olaf's email address seems to
be defunct at this point anyway. Just drop it.
Cc: Olaf Kirch <okir@suse.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Currently there is no limit on how many v4 clients are supported
by the system. This can be a problem in systems with small memory
configuration to function properly when a very large number of
clients exist that creates memory shortage conditions.
This patch enforces a limit of 1024 NFSv4 clients, including courtesy
clients, per 1GB of system memory. When the number of the clients
reaches the limit, requests that create new clients are returned
with NFS4ERR_DELAY and the laundromat is kicked start to trim old
clients. Due to the overhead of the upcall to remove the client
record, the maximun number of clients the laundromat removes on
each run is limited to 128. This is done to ensure the laundromat
can still process the other tasks in a timely manner.
Since there is now a limit of the number of clients, the 24-hr
idle time limit of courtesy client is no longer needed and was
removed.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The documenting comment for struct nf_file states:
/*
* A representation of a file that has been opened by knfsd. These are hashed
* in the hashtable by inode pointer value. Note that this object doesn't
* hold a reference to the inode by itself, so the nf_inode pointer should
* never be dereferenced, only used for comparison.
*/
Replace the two existing dereferences to make the comment always
true.
Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The last close of a file should enable other accessors to open and
use that file immediately. Leaving the file open in the filecache
prevents other users from accessing that file until the filecache
garbage-collects the file -- sometimes that takes several seconds.
Reported-by: Wang Yugui <wangyugui@e16-tech.com> Link: https://bugzilla.linux-nfs.org/show_bug.cgi?387 Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Enable the filecache hash table to start small, then grow with the
workload. Smaller server deployments benefit because there should
be lower memory utilization. Larger server deployments should see
improved scaling with the number of open files.
Suggested-by: Jeff Layton <jlayton@kernel.org> Suggested-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
In a moment, the nfsd_file_hashtbl global will be replaced with an
rhashtable. Replace the one or two spots that need to check if the
hash table is available. We can easily reuse the SHUTDOWN flag for
this purpose.
Document that this mechanism relies on callers to hold the
nfsd_mutex to prevent init, shutdown, and purging to run
concurrently.
Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The code that computes the hashval is the same in both callers.
To prevent them from going stale, reframe the documenting comments
to remove descriptions of the underlying hash table structure, which
is about to be replaced.
Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
I'm about to replace nfsd_file_hashtbl with an rhashtable. The
individual hash values will no longer be visible or relevant, so
remove them from the tracepoints.
Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The checks in nfsd_file_acquire() and nfsd_file_put() that directly
invoke filecache garbage collection are intended to keep cache
occupancy between a low- and high-watermark. The reason to limit the
capacity of the filecache is to keep filecache lookups reasonably
fast.
However, invoking garbage collection at those points has some
undesirable negative impacts. Files that are held open by NFSv4
clients often push the occupancy of the filecache over these
watermarks. At that point:
- Every call to nfsd_file_acquire() and nfsd_file_put() results in
an LRU walk. This has the same effect on lookup latency as long
chains in the hash table.
- Garbage collection will then run on every nfsd thread, causing a
lot of unnecessary lock contention.
- Limiting cache capacity pushes out files used only by NFSv3
clients, which are the type of files the filecache is supposed to
help.
To address those negative impacts, remove the direct calls to the
garbage collector. Subsequent patches will address maintaining
lookup efficiency as cache capacity increases.
Suggested-by: Wang Yugui <wangyugui@e16-tech.com> Suggested-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Without LRU item rotation, the shrinker visits only a few items on
the end of the LRU list, and those would always be long-term OPEN
files for NFSv4 workloads. That makes the filecache shrinker
completely ineffective.
Adopt the same strategy as the inode LRU by using LRU_ROTATE.
Suggested-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
There have been reports of problems when running fstests generic/531
against Linux NFS servers with NFSv4. The NFS server that hosts the
test's SCRATCH_DEV suffers from CPU soft lock-ups during the test.
Analysis shows that:
fs/nfsd/filecache.c
482 ret = list_lru_walk(&nfsd_file_lru,
483 nfsd_file_lru_cb,
484 &head, LONG_MAX);
causes nfsd_file_gc() to walk the entire length of the filecache LRU
list every time it is called (which is quite frequently). The walk
holds a spinlock the entire time that prevents other nfsd threads
from accessing the filecache.
What's more, for NFSv4 workloads, none of the items that are visited
during this walk may be evicted, since they are all files that are
held OPEN by NFS clients.
Address this by ensuring that open files are not kept on the LRU
list.
Reported-by: Frank van der Linden <fllinden@amazon.com> Reported-by: Wang Yugui <wangyugui@e16-tech.com> Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=386 Suggested-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
There has always been the capability of exporting filecache metrics
via /proc, but it was never hooked up. Let's surface these metrics
to enable better observability of the filecache.
Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Count the number of successful acquisitions that did not create a
file (ie, acquisitions that do not result in a compulsory cache
miss). This count can be compared directly with the reported hit
count to compute a hit ratio.
Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Capture file handles and how they map to local inodes. In particular,
NFSv4 PUTFH uses fh_verify() so we can now observe which file handles
are the target of OPEN, LOOKUP, RENAME, and so on.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Instead of trusting that struct file_lock returns completely unchanged
after vfs_test_lock() when there's no conflicting lock, stash away our
nlm_lockowner reference so we can properly release it for all cases.
This defends against another file_lock implementation overwriting fl_owner
when the return type is F_UNLCK.
Reported-by: Roberto Bergantinos Corpas <rbergant@redhat.com> Tested-by: Roberto Bergantinos Corpas <rbergant@redhat.com> Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This flag is a new way to configure ignore mask which allows adding and
removing the event flags FAN_ONDIR and FAN_EVENT_ON_CHILD in ignore mask.
The legacy FAN_MARK_IGNORED_MASK flag would always ignore events on
directories and would ignore events on children depending on whether
the FAN_EVENT_ON_CHILD flag was set in the (non ignored) mask.
FAN_MARK_IGNORE can be used to ignore events on children without setting
FAN_EVENT_ON_CHILD in the mark's mask and will not ignore events on
directories unconditionally, only when FAN_ONDIR is set in ignore mask.
The new behavior is non-downgradable. After calling fanotify_mark() with
FAN_MARK_IGNORE once, calling fanotify_mark() with FAN_MARK_IGNORED_MASK
on the same object will return EEXIST error.
Setting the event flags with FAN_MARK_IGNORE on a non-dir inode mark
has no meaning and will return ENOTDIR error.
The meaning of FAN_MARK_IGNORED_SURV_MODIFY is preserved with the new
FAN_MARK_IGNORE flag, but with a few semantic differences:
1. FAN_MARK_IGNORED_SURV_MODIFY is required for filesystem and mount
marks and on an inode mark on a directory. Omitting this flag
will return EINVAL or EISDIR error.
2. An ignore mask on a non-directory inode that survives modify could
never be downgraded to an ignore mask that does not survive modify.
With new FAN_MARK_IGNORE semantics we make that rule explicit -
trying to update a surviving ignore mask without the flag
FAN_MARK_IGNORED_SURV_MODIFY will return EEXIST error.
The conveniene macro FAN_MARK_IGNORE_SURV is added for
(FAN_MARK_IGNORE | FAN_MARK_IGNORED_SURV_MODIFY), because the
common case should use short constant names.
Setting flags FAN_ONDIR FAN_EVENT_ON_CHILD in ignore mask has no effect.
The FAN_EVENT_ON_CHILD flag in mask implicitly applies to ignore mask and
ignore mask is always implicitly applied to events on directories.
Define a mark flag that replaces this legacy behavior with logic of
applying the ignore mask according to event flags in ignore mask.
Implement the new logic to prepare for supporting an ignore mask that
ignores events on children and ignore mask that does not ignore events
on directories.
To emphasize the change in terminology, also rename ignored_mask mark
member to ignore_mask and use accessors to get only the effective
ignored events or the ignored events and flags.
This change in terminology finally aligns with the "ignore mask"
language in man pages and in most of the comments.
NFSD has advertised support for the NFSv4 time_create attribute
since commit e377a3e698fb ("nfsd: Add support for the birth time
attribute").
Igor Mammedov reports that Mac OS clients attempt to set the NFSv4
birth time attribute via OPEN(CREATE) and SETATTR if the server
indicates that it supports it, but since the above commit was
merged, those attempts now fail.
Table 5 in RFC 8881 lists the time_create attribute as one that can
be both set and retrieved, but the above commit did not add server
support for clients to provide a time_create attribute. IMO that's
a bug in our implementation of the NFSv4 protocol, which this commit
addresses.
Whether NFSD silently ignores the new birth time or actually sets it
is another matter. I haven't found another filesystem service in the
Linux kernel that enables users or clients to modify a file's birth
time attribute.
This commit reflects my (perhaps incorrect) understanding of whether
Linux users can set a file's birth time. NFSD will now recognize a
time_create attribute but it ignores its value. It clears the
time_create bit in the returned attribute bitmask to indicate that
the value was not used.
Reported-by: Igor Mammedov <imammedo@redhat.com> Fixes: e377a3e698fb ("nfsd: Add support for the birth time attribute") Tested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Commit ceaf69f8eadc ("fanotify: do not allow setting dirent events in
mask of non-dir") added restrictions about setting dirent events in the
mask of a non-dir inode mark, which does not make any sense.
For backward compatibility, these restictions were added only to new
(v5.17+) APIs.
It also does not make any sense to set the flags FAN_EVENT_ON_CHILD or
FAN_ONDIR in the mask of a non-dir inode. Add these flags to the
dir-only restriction of the new APIs as well.
Move the check of the dir-only flags for new APIs into the helper
fanotify_events_supported(), which is only called for FAN_MARK_ADD,
because there is no need to error on an attempt to remove the dir-only
flags from non-dir inode.
Commit f49169c97fce ("NFSD: Remove svc_serv_ops::svo_module") removed
calls to module_put_and_kthread_exit() from threads that acted as SUNRPC
servers and had a related svc_serv_ops structure. This was correct.
It ALSO removed the module_put_and_kthread_exit() call from
nfs4_run_state_manager() which is NOT a SUNRPC service.
Consequently every time the NFSv4 state manager runs the module count
increments and won't be decremented. So the nfsv4 module cannot be
unloaded.
So restore the module_put_and_kthread_exit() call.
Fixes: f49169c97fce ("NFSD: Remove svc_serv_ops::svo_module") Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Now that there are no more callers of nfsd_file_put() that might
hold a spin lock, ensure the lockdep infrastructure can catch
newly introduced calls to nfsd_file_put() made while a spinlock
is held.
Refactor: Use existing helpers that other lock operations use. This
change removes several automatic variables, so re-organize the
variable declarations for readability.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This can be reproduce by concurrent operations:
1. fsopen(nfsd)/fsconfig
2. insmod/rmmod nfsd
Since the nfsd file system is registered before than nfsd_net allocated,
the caller may get the file_system_type and use the nfsd_net before it
allocated, then null-ptr-deref occurred.
So init_nfsd() should call register_filesystem() last.
Fixes: bd5ae9288d64 ("nfsd: register pernet ops last, unregister first") Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Once an svc thread is scheduled and executing an RPC, no other
processes will touch svc_rqst::rq_flags. Thus bus-locked atomics are
not needed outside the svc thread scheduler.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
There have been reports of races that cause NFSv4 OPEN(CREATE) to
return an error even though the requested file was created. NFSv4
does not provide a status code for this case.
To mitigate some of these problems, reorganize the NFSv4
OPEN(CREATE) logic to allocate resources before the file is actually
created, and open the new file while the parent directory is still
locked.
Two new APIs are added:
+ Add an API that works like nfsd_file_acquire() but does not open
the underlying file. The OPEN(CREATE) path can use this API when it
already has an open file.
+ Add an API that is kin to dentry_open(). NFSD needs to create a
file and grab an open "struct file *" atomically. The
alloc_empty_file() has to be done before the inode create. If it
fails (for example, because the NFS server has exceeded its
max_files limit), we avoid creating the file and can still return
an error to the NFS client.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=382 Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: JianHong Yin <jiyin@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The NFSv3 CREATE and NFSv4 OPEN(CREATE) use cases are about to
diverge such that it makes sense to split do_nfsd_create() into one
version for NFSv3 and one for NFSv4.
As a first step, copy do_nfsd_create() to nfs3proc.c and remove
NFSv4-specific logic.
One immediate legibility benefit is that the logic for handling
NFSv3 createhow is now quite straightforward. NFSv4 createhow
has some subtleties that IMO do not belong in generic code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
I'd like to move do_nfsd_create() out of vfs.c. Therefore
nfsd_create_setattr() needs to be made publicly visible.
Note that both call sites in vfs.c commit both the new object and
its parent directory, so just combine those common metadata commits
into nfsd_create_setattr().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
projects / users / dwmw2 / linux.git / log