Olof Johansson [Tue, 11 Dec 2018 16:05:01 +0000 (08:05 -0800)]
Merge tag 'renesas-dt-bindings-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Renesas ARM Based SoC DT Bindings Updates for v4.21
* Move 'renesas,prr' binding to its own document
- Prepration for converting board-level bindings to json-schema
* Document iW-RainboW-G20D-Qseven-RZG1N board and iWave RZ/G1N SOM
* tag 'renesas-dt-bindings-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
dt-bindings: arm: renesas: Move 'renesas,prr' binding to its own doc
dt-bindings: arm: renesas: Document iW-RainboW-G20D-Qseven-RZG1N board
dt-bindings: arm: renesas: Document iWave RZ/G1N SOM
Olof Johansson [Tue, 11 Dec 2018 15:43:46 +0000 (07:43 -0800)]
Merge tag 'pxa-dt-4.21' of https://github.com/rjarzmik/linux into next/dt
This device-tree pxa update brings :
- various fixes from Daniel (W=12 issues mainly)
- support for the first pxa3xx devicetree pxa board
* tag 'pxa-dt-4.21' of https://github.com/rjarzmik/linux:
ARM: dts: pxa3xx: Add Raumfeld DTS files
ARM: dts: pxa: clean up USB controller nodes
ARM: dts: pxa3xx: clean up pxa3xx clock controller node name
ARM: dts: pxa3xx: order timer and gcu nodes under /pxabus
ARM: dts: pxa2xx: fix hwuart memory range
ARM: dts: pxa3xx: drop #address-cells and #size-cells from pinctrl node
ARM: dts: pxa2xx: drop #address-cells and #size-cells from /cpus
ARM: dts: pxa3xx: add gcu node
Document the iW-RainboW-G20D-Qseven-RZG1N device tree bindings,
listing it as a supported board.
Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Wed, 5 Dec 2018 09:06:51 +0000 (09:06 +0000)]
ARM: dts: iwg20d-q7-common: Move cmt/rwdt node out of RZ/G1M SOM
The iWave RZ/G1N board is almost identical to RZ/G1M. cmt and rwdt modules
are SoC specific and should be part of board dts rather than SoM dtsi. By
moving these nodes to the common dtsi it allows cmt and rwdt to be enabled
on both of these boards with less lines of code.
Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Biju Das [Fri, 30 Nov 2018 15:26:20 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add Ethernet AVB support
Add Ethernet AVB support for R8A7744 SoC.
Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The thermal hardware description for the RZ/G1M SoC was added to its DTS
after the introduction of support for thermal zones, and included a
thermal-zones node from the beginning.
Hence there is no need to claim compatibility with
"renesas,rcar-thermal", which would be needed only for backwards
compatibility with kernels predating thermal zone support.
Fixes: 6c76b4f7d89e89f0 ("ARM: dts: r8a7743: Add thermal device to DT") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Daniel Mack [Fri, 30 Nov 2018 17:55:43 +0000 (18:55 +0100)]
ARM: dts: pxa3xx: Add Raumfeld DTS files
This patch adds a set of DTS files that support all PXA3xx based Raumfeld
audio hardware devices.
Common nodes are factored out into 'common' and 'tuneable-clock' include
files to keep the top-level DTS files smaller.
Signed-off-by: Daniel Mack <daniel@zonque.org>
[Robert: Reordered Makefile in alphabetical order] Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Olof Johansson [Mon, 3 Dec 2018 21:04:14 +0000 (13:04 -0800)]
Merge tag 'qcom-arm64-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt
Qualcomm ARM64 Updates for v4.21
* Add QCS404 base platform and nodes
* Add QCS404 EVB boards
* Add external SD and dependencies for MSM8998-mtp
* Add default scm compatible for MSM8998
* Fix XO clk name on MSM8998
* Add prng-ee nodes for SDM845 and MSM8996
* Add ADC die temp node for pm8998
* Fix documentation on QCOM ADC sample
Olof Johansson [Mon, 3 Dec 2018 20:50:41 +0000 (12:50 -0800)]
Merge tag 'arm-soc/for-4.21/devicetree' of https://github.com/Broadcom/stblinux into next/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 4.21, please pull the following:
- Rafal relicenses a bunch of DTS files he wrote under the GPL 2.0+/MIT
license and adds proper SPDX license tags in the process
- Rene adds support for the Linksys EA6500 v2 Wi-Fi router based on
BCM4708 plus two BCM4360 and BCM4331 radios
- Phil documents and updates the vchiq mailbox compatible string in
order to establish a correct agreement between the Raspberry Pi
firmware and the ARM CPU's view of what an ARM CPU cache line size is,
he also fixes the mailbox "reg" property to be correctly expressed in
bytes
- Stefan updates the Raspberry Pi Zero DTS files to use SPDX tags
- Florian enables the SATA PHY and AHCI controller on the BCM63138 SoCs,
he also does a bit of refactoring of aliases for the Northstar Plus
DTS files
* tag 'arm-soc/for-4.21/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: Describe Northstar pins mux controller
ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2
ARM: dts: bcm2835-rpi-zero: Switch to SPDX identifier
ARM: dts: bcm283x: Correct mailbox register sizes
ARM: dts: bcm283x: Correct vchiq compatible string
dt-bindings: soc: Document "brcm,bcm2836-vchiq"
ARM: dts: NSP: Move aliases to bcm-nsp.dtsi
ARM: dts: BCM53573: Relicense SoC file to the GPL 2.0+ / MIT
ARM: dts: BCM63xx: Enable SATA AHCI and PHY for BCM963138DVT
ARM: dts: BCM63xx: enable SATA PHY and AHCI controller
ARM: dts: BCM53573: Relicense Tenda AC9 file to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Relicense BCM47094 file to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Relicense BCM47081/BCM4709 files to the GPL 2.0+ / MIT
Add iio-hwmon-battery using adc channel 12 and enable adc to make
adc running. This channel is used to read RTC battery voltage.
Note with Romulus hardware design, it requires GPIOR3 to be pulled
high to read the voltage, otherwise the reading is 0.
When GPIOR3 is high, it consumes battery and impacts the battery life.
So it is left for user space to toggle the GPIO when trying to read the
voltage.
Signed-off-by: Lei YU <mine260309@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
Daniel Mack [Sat, 1 Dec 2018 13:54:51 +0000 (14:54 +0100)]
ARM: dts: pxa: clean up USB controller nodes
PXA25xx SoCs don't have a USB controller, so drop the node from the
common pxa2xx.dtsi base file. Both pxa27x and pxa3xx have a dedicated
node already anyway.
While at it, unify the names for the nodes across all pxa platforms.
Signed-off-by: Daniel Mack <daniel@zonque.org> Reported-by: Sergey Yanovich <ynvich@gmail.com> Link: https://patchwork.kernel.org/patch/8375421/ Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Olof Johansson [Fri, 30 Nov 2018 23:46:17 +0000 (15:46 -0800)]
Merge tag 'hisi-arm64-dt-for-4.21' of git://github.com/hisilicon/linux-hisi into next/dt
ARM64: DT: Hisilicon SoCs DT updates for 4.21
* Hi3660 SoC and related boards:
- Standardize LED labels and triggers for the hikey960 board
- Add the missing cooling-cells property for the cpu nodes
- Add all cpus into the cooling maps
* Hi3670 SoC and related boards:
- Add clock nodes and update the uart clock
- Add Pinctrl, GPIO and uart nodes
- Enable uart and add GPIO line names for the hikey970 board
* Hi3798 SoC and related boards:
- Standardize LED labels and triggers for the poplar board
* Hi6220 SoC and related boards:
- Standardize LED labels and triggers for the hikey board
- Add all cpus into the cooling maps
* tag 'hisi-arm64-dt-for-4.21' of git://github.com/hisilicon/linux-hisi:
ARM64: dts: hisilicon: Add all CPUs in cooling maps
arm64: dts: hi3660: Add missing cooling device properties for CPUs
arm64: dts: hisilicon: poplar: Standardize LED labels and triggers
arm64: dts: hisilicon: hikey960: Standardize LED labels and triggers
arm64: dts: hisilicon: hikey: Standardize LED labels and triggers
arm64: dts: hisilicon: hikey970: Add GPIO line names
arm64: dts: hisilicon: hikey970: Enable on-board UARTs
arm64: dts: hisilicon: hi3670: Add UART nodes
arm64: dts: hisilicon: hi3670: Add GPIO controller support
arm64: dts: hisilicon: Add Pinctrl support for HiKey970 board
arm64: dts: hisilicon: Source SoC clock for UART6
arm64: dts: hisilicon: Add clock nodes for Hi3670 SoC
Rob Herring [Fri, 30 Nov 2018 01:52:51 +0000 (19:52 -0600)]
ARM: dts: aspeed: add missing memory unit-address
The base aspeed-g5.dtsi already defines a '/memory@80000000' node, so
'/memory' in the board files create a duplicate node. We're probably
getting lucky that the bootloader fixes up the memory node that the
kernel ends up using. Add the unit-address so it's merged with the base
node.
Found with DT json-schema checks.
Cc: Joel Stanley <joel@jms.id.au> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-aspeed@lists.ozlabs.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
There's a bug in dtc in checking for duplicate node names when there's
another section (e.g. "/ { };"). In this case, skeleton.dtsi provides
another section. Upon removal of skeleton.dtsi, the dtb fails to build
due to a duplicate node 'fixedregulator@0'. As both nodes were pretty
much the same 3.3V fixed regulator, it hasn't really mattered. Fix this
by renaming the nodes to something unique. In the process, drop the
unit-address which shouldn't be present wtihout reg property.
Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 30 Nov 2018 23:17:33 +0000 (15:17 -0800)]
Merge tag 'omap-for-v4.21/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Device tree changes for omaps for v4.21 merge window
These changes mostly configure pinctrl for am437x-gp-evm. There is
also non-critical fix for a comment for Clang, and we enable earlycon
for am3517-evm.
* tag 'omap-for-v4.21/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am437x-gp-evm: Add sleep state for beeper pins
ARM: dts: am437x-gp-evm: Add pinmux for gpio0 wake
ARM: dts: am437x-gp-evm: Add uart0 pinctrl default and sleep states
ARM: dts: am437x-gp-evm: Add pinctrl for debugss pins
ARM: dts: am437x-gp-evm: Add pinctrl for unused_pins
ARM: dts: am437x-gp-evm: Add state for ddr3 vtt toggle pin
ARM: dts: am3517-evm: Enable earlycon stdout path
ARM: dts: omap3-gta04: Fix comment block
Olof Johansson [Fri, 30 Nov 2018 23:16:42 +0000 (15:16 -0800)]
Merge tag 'vexpress-drm-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/dt
Versatile Express DTS update for DRM:
This updates the Versatile Express family DTS files to
contain the correct and detailed information required
for the PL11x DRM driver to work properly.
* tag 'vexpress-drm-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: Modernize the Vexpress PL111 integration
Lubomir Rintel [Wed, 28 Nov 2018 17:53:14 +0000 (18:53 +0100)]
ARM: dts: mmp2: Add SSP controllers
Despite Marvel keeps their base addresses secret there's a good chance
they're actually correct.
SSP1 and SSP3 bases were taken from OLPC 1.75: OpenFirmware and kernel
respectively. SSP2 and SSP4 addresses are from James Cameron who actually
has a copy of the data sheet.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Olof Johansson <olof@lixom.net>
Lubomir Rintel [Wed, 28 Nov 2018 17:53:11 +0000 (18:53 +0100)]
ARM: dts: mmp2: add more TWSI controllers
I've gotten the base addresses, clocks and interrupts from an rusty and old
out-of-tree driver. I haven't actually checked against the datasheet, since
that one is reserved for the Marvell inner circle.
Tested with an accelerometer on TWSI6 on an OLPC XO 1.75 machine.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Olof Johansson <olof@lixom.net>
Lubomir Rintel [Wed, 28 Nov 2018 17:53:10 +0000 (18:53 +0100)]
ARM: dts: mmp2: fix TWSI2
Marvell keeps their MMP2 datasheet secret, but there are good clues
that TWSI2 is not on 0xd4025000 on that platform, not does it use
IRQ 58. In fact, the IRQ 58 on MMP2 seems to be a signal processor:
arch/arm/mach-mmp/irqs.h:#define IRQ_MMP2_MSP 58
I'm taking a somewhat educated guess that is probably a copy & paste
error from PXA168 or PXA910 and that the real controller in fact hides
at address 0xd4031000 and uses an interrupt line multiplexed via IRQ 17.
I'm also copying some properties from TWSI1 that were missing or
incorrect.
Tested on a OLPC XO 1.75 machine, where the RTC is on TWSI2.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 30 Nov 2018 23:09:13 +0000 (15:09 -0800)]
Merge tag 'socfpga_dts_updates_for_v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt
SoCFPGA DTS updates for v5.0
- Use SPDX license identifier for all SoCFPGA DTS files.
- Remove dma-mask property as it has been deprecated.
- Use tabs in DTS files.
- Use the specific "altr,stratix10-rst-mgr" property for the Stratix10
reset manager.
* tag 'socfpga_dts_updates_for_v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: stratix10: use "altr,stratix10-rst-mgr" binding
ARM: dts: socfpga: use tabs for indentation
arm: dts: socfpga: remove dma-mask property
arm: dts: socfpga*.dts*: use SPDX-License-Identifier
* M3-W (r8a7796) SoC:
- Describe CMT (Compare Match Timer) devices in DT
- Describe I2C-DVFS device node in DT
* M3-N (r8a77965) SoC:
- Describe CAN, CANFD and LVDS in DT
* R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs:
- Describe CPU topology, capacity and cooling maps in DT
- Add SSIU support to R-Car audio
* R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs:
- Extend register range of HSUSB device to match documentation
* R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) based
Salvator-X, Salvator-XS and ULCB boards:
- Switch eMMC bus to 1V8
* R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) based
Salvator-X and Salvator-XS boards:
- Describe USB3.0 xHCI host and prerepheral devices as companions
* R-Car E3 (r8a77990) SoC:
- Add thermal support
- Add support for interupt controller for external devices (INTC-EX)
- Describe all SCIF devices and SYS-DMA for I2C and MSIOF devices
* R-Car E3 (r8a77990) based Ebisu board:
- Enable SDHI, CAN, CANFD, audio and USB3.0
- Describe serial console pins
* R-Car E3 (r8a77990) based Ebisu and
R-Car D3 (r8a77995) based Draak board:
- Enable USB2.0 peripheral device
* R-Car M3-N (r8a77965), E3 (r8a77990) and V3H (r8a77980) SoCs:
- Connect EtherAVB to IPMMU
* R-Car V3M (r8a77970) and V3H (r8a77980) SoCs:
- Describe TMU (timer unit), PWM timer controller and MSIOF devides in DT
- Add thermal support
* RZ/G2M (r8a774a1) SoC:
- Use clock and power index macros
- Describe VIN, CSI-2 and CAN devices in DT
* tag 'renesas-arm64-dt-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (40 commits)
arm64: dts: renesas: Add all CPUs in cooling maps
arm64: dts: renesas: r8a77990: add thermal device support
arm64: dts: renesas: r8a77990: Enable I2C DMA
arm64: dts: renesas: r8a7796: Add CMT device nodes
arm64: dts: renesas: r8a7796: add SSIU support for sound
arm64: dts: renesas: r8a77990: Add I2C-DVFS device node
arm64: dts: renesas: r8a77990: ebisu: Add and enable CAN,FD device nodes
arm64: dts: renesas: r8a77965: Add CAN and CANFD controller nodes
arm64: dts: renesas: r8a77990: ebisu: Add and enable PCIe device node
arm64: dts: renesas: Add CPU capacity-dmips-mhz
arm64: dts: renesas: Add CPU topology on R-Car Gen3 SoCs
arm64: dts: renesas: r8a774a1: Replace clock magic numbers
arm64: dts: renesas: r8a774a1: Replace power magic numbers
arm64: dts: renesas: r8a7795: add SSIU support for sound
arm64: dts: renesas: r8a77990: Fix VIN endpoint numbering
arm64: dts: renesas: ebisu: Add and enable SDHI device nodes
arm64: dts: renesas: ebisu: Add serial console pins
arm64: dts: renesas: Switch eMMC bus to 1V8 on Salvator-X and ULCB
arm64: dts: renesas: r8a77990: Add all HSCIF nodes
arm64: dts: renesas: r8a779{7|8}0: add TMU support
...
Olof Johansson [Fri, 30 Nov 2018 23:04:01 +0000 (15:04 -0800)]
Merge tag 'v4.21-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
New dts for Gru-Scarlet (tablet device), default backlight brightness
for all Gru devices, rk3399 spi dma properties, some improvements for
the rk3399-sapphire board (fan, chosen, backlight), hs200 mode for the
emmc on the rock64 and declaring all cpu cores in the cooling maps
instead of just cpu0.
* tag 'v4.21-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add all CPUs in cooling maps
arm64: dts: rockchip: add Gru Scarlet devicetrees
arm64: dts: rockchip: move backlight from rk3399 sapphire to excavator
arm64: dts: rockchip: Use default brightness table for rk3399-gru
arm64: dts: rockchip: add chosen node on rk3399-sapphire
arm64: dts: rockchip: enable HS200 for eMMC on rock64
arm64: dts: rockchip: add fan on rk3399-sapphire board
arm64: dts: rockchip: add rk3399 SPI DMAs
Olof Johansson [Fri, 30 Nov 2018 19:45:47 +0000 (11:45 -0800)]
Merge tag 'vexpress-updates-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt
ARMv7 Vexpress updates for v4.20
Single patch to use updated coresight graph bindings thereby removing
loads of dtc warnings
* tag 'vexpress-updates-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
ARM: dts: vexpress/TC2: Update entries to match latest coresight bindings
René Kjellerup [Mon, 1 Oct 2018 22:07:16 +0000 (15:07 -0700)]
ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2
It is wireless home router based on BCM4708A0 with BCM4360 + BCM4331
wireless chipsets. The BCM4331 5GHz chip currently isn't supported only
due to missing compatible firmware.
Bjorn Andersson [Fri, 30 Nov 2018 06:56:55 +0000 (22:56 -0800)]
arm64: dts: qcom: msm8998: Fix compatible of scm node
The scm binding and driver was updated to rely on the fallback to the
default qcom,scm for any modern SoC and as such both are required. Add
the default compatible to make the scm instance probe.
Geert Uytterhoeven [Thu, 29 Nov 2018 10:34:35 +0000 (11:34 +0100)]
arm64: dts: renesas: r8a7795-es1: Add missing power domains to IPMMU nodes
While commit 3b7e7848f0e88b36 ("arm64: dts: renesas: r8a7795: Add IPMMU
device nodes") for R-Car H3 ES2.0 did include power-domains properties,
they were forgotten in the counterpart for older R-Car H3 ES1.x SoCs.
The R-Car Gen3 HardWare Manual Errata for Rev. 1.00 (Aug 24, 2018)
removed the IPMMU-IR IOMMU instance on R-Car M3-N, as this SoC does not
have an Image Processing Unit (IMP-X5) nor the A3IR power domain.
Jeffrey Hugo [Thu, 15 Nov 2018 17:18:08 +0000 (10:18 -0700)]
arm64: dts: qcom: msm8998: correct xo clock name
The root parent clock of most msm8998 clock is the "xo" clock. The DT node
is incorrectly named "xo_board", which prevents Linux from correctly
parsing the clock tree, resulting in most clocks being unparented and
unable to be manipulated. The end result is that we can't turn on clocks
for peripherals like SD, so init usually fails.
Fixes: 4807c71cc688 (arm64: dts: Add msm8998 SoC and MTP board support) Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
The Amlogic Meson GX SoCs embeds a clock measurer IP to measure the internal
clock paths frequencies.
This patch adds the node in the top-level meson-gx dtsi.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
projects / nvme.git / log