Merge tag 'tegra-for-6.10-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v6.10-rc1
Included is one change that adds the dma-coherent flag to the device
tree json-schema for host1x on Tegra194 and Tegra234.
* tag 'tegra-for-6.10-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: display: tegra: Allow dma-coherent on Tegra194 and later
Merge tag 'renesas-dts-for-v6.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.10 (take two)
- Add external interrupt (IRQC) support for the RZ/Five SoC,
- Add SPI (MSIOF), external interrupt (INTC-EX), and IOMMU support for
the R-Car V4M SoC,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: r8a779h0: Link IOMMU consumers
arm64: dts: renesas: r8a779h0: Add IPMMU nodes
arm64: dts: renesas: r8a779h0: Add INTC-EX node
arm64: dts: renesas: r8a779h0: Add MSIOF nodes
arm64: dts: renesas: rzg3s-smarc-som: Enable eMMC by default
riscv: dts: renesas: rzfive-smarc-som: Drop deleting interrupt properties from ETH0/1 nodes
arm64: dts: renesas: r9a07g043: Move interrupt-parent property to common DTSI
riscv: dts: renesas: r9a07g043f: Add IRQC node to RZ/Five SoC DTSI
arm64: dts: renesas: s4sk: Fix ethernet0 alias
Merge tag 'v6.10-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: ArmSom Sige7, GameForce Chi,Forlinx FET3588-C with OK3588-C
baseboard, Protonic MECSBC, Wolfvision PF5.
The panthor driver for Mali Valhall GPUs landed, so a number of boards
enable their gpu (Cool Pi, Theobroma-Systems boards, QuartzPro64,
Rock5b, EVB1)
Also the USBDP phy driver landed, allowing the usb3 dual-role controllers
to be used on EVB1, Rock 5A and 5B, Indiedroid-Nova, Theobroma-Systems
Tiger and Jaguar.
A lot new peripherals for the Khadas Edge 2 (rtc, uart, sfc, adc, ir,
usb, pcie, tf-card, pmic); PCIe3 support on Jaguar, audio support for
the rk3308 and cache descriptions for rk356x and rk3328.
Corrected model names for boards from Radxa, Pine64, Powkiddy, Anberic
and general more dt cleanups.
* tag 'v6.10-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (64 commits)
arm64: dts: rockchip: add dual-role usb3 hosts to rk3588 Tiger-Haikou
arm64: dts: rockchip: add usb-id extcon on rk3588 tiger
arm64: dts: rockchip: fix comment for upper usb3 port
arm64: dts: rockchip: fix pcie-refclk frequency on rk3588 tiger
arm64: dts: rockchip: correct gpio_pwrctrl1 typos on rk3588(s) boards
arm64: dts: rockchip: Correct the model names for Pine64 boards
dt-bindings: arm: rockchip: Correct the descriptions for Pine64 boards
arm64: dts: rockchip: Add ArmSom Sige7 board
dt-bindings: arm: rockchip: Add ArmSoM Sige7
dt-bindings: vendor-prefixes: add ArmSoM
arm64: dts: rockchip: add PCIe3 support on rk3588-jaguar
arm64: dts: rockchip: move uart2 pinmux to dtsi on rk3588-tiger
arm64: dts: rockchip: Add USB-C Support for rk3588s-indiedroid-nova
arm64: dts: rockchip: correct the model name for Radxa ROCK 3A
dt-bindings: arm: rockchip: correct the model name for Radxa ROCK 3A
arm64: dts: rockchip: Correct the model names for Radxa ROCK 5 boards
dt-bindings: arm: rockchip: Correct the descriptions for Radxa boards
arm64: dts: rockchip: add lower USB3 port to rock-5b
arm64: dts: rockchip: add upper USB3 port to rock-5a
arm64: dts: rockchip: add USB3 to rk3588-evb1
...
Merge tag 'stm32-dt-for-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.10, round 1
Highlights:
----------
- MPU:
- STM32MP13:
- Add and enable LTDC display (rocktech,rk043fn48h)
on stm32mp135f-dk.
- Add firewall bus based on ETZPC firewall controller.
- Add PWR regulator support: Can be only used if the platform is
set as "no-secure" (RCC_SECCFGR cleared) either use SCMI
regulator.
- STMP32MP15:
- Add firewall bus based on ETZPC firewall controller.
- Add heartbeat on stm32mp157c-ed1.
- STM32MP25:
- Add firewall bus based on RIFSC firewall controller.
- Add clock support (RCC) based on SCMI clock protocol for root clocks.
- Add all I2C instances and declare i2c2/i2c8 on stm32mp257f-ev1.
- Add all SPI instances. and declare spi3/spi8 on stm32mp257f-ev1.
* tag 'stm32-dt-for-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (21 commits)
arm64: dts: st: correct masks for GIC PPI interrupts on stm32mp25
arm64: dts: st: add spi3 / spi8 properties on stm32mp257f-ev1
arm64: dts: st: add spi3/spi8 pins for stm32mp25
arm64: dts: st: add all 8 spi nodes on stm32mp251
arm64: dts: st: add i2c2 / i2c8 properties on stm32mp257f-ev1
arm64: dts: st: add i2c2/i2c8 pins for stm32mp25
arm64: dts: st: add all 8 i2c nodes on stm32mp251
arm64: dts: st: add rcc support for STM32MP25
ARM: dts: stm32: enable display support on stm32mp135f-dk board
ARM: dts: stm32: add LTDC pinctrl on STM32MP13x SoC family
ARM: dts: stm32: add LTDC support for STM32MP13x SoC family
dt-bindings: display: simple: allow panel-common properties
ARM: dts: stm32: add PWR regulators support on stm32mp131
media: dt-bindings: add access-controllers to STM32MP25 video codecs
ARM: dts: stm32: add heartbeat led for stm32mp157c-ed1
ARM: dts: stm32: move can3 node from stm32f746 to stm32f769
ARM: dts: stm32: put ETZPC as an access controller for STM32MP13x boards
ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
ARM: dts: stm32: put ETZPC as an access controller for STM32MP15x boards
ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
...
Merge tag 'hisi-arm64-dt-for-6.10' of https://github.com/hisilicon/linux-hisi into soc/dt
ARM64: DT: HiSilicon ARM64 DT updates for v6.10
- Move non-MMIO node out of soc for the hip05, hip06 and hip07 SoC
- Miscellaneous fixes and improvements like correcting unit addresses and
missing reg
* tag 'hisi-arm64-dt-for-6.10' of https://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: hi6220: correct tsensor unit addresses
arm64: dts: hisilicon: hi6220-hikey: drop unit addresses from fixed regulators
arm64: dts: hisilicon: hi6220-hikey: add missing port@0 reg
arm64: dts: hisilicon: hip07: correct unit addresses
arm64: dts: hisilicon: hip07: move non-MMIO node out of soc
arm64: dts: hisilicon: hip06: correct unit addresses
arm64: dts: hisilicon: hip06: move non-MMIO node out of soc
arm64: dts: hisilicon: hip05-d02: correct local-bus unit addresses
arm64: dts: hisilicon: hip05: move non-MMIO node out of soc
Merge tag 'samsung-dt64-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.10
1. Add FIFO depth to each SPI node so we can avoid matching this through
DTS alias. Difference SPI instances on given SoC have different FIFO
depths.
2. Exynos850: add clock controllers providing clocks to CPUs.
3. Google GS101: few cleanups and add missing serial engine (USI)
interface nodes.
* tag 'samsung-dt64-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: gs101: define all PERIC USI nodes
arm64: dts: exynos: gs101: join lines close to 80 chars
arm64: dts: exynos: gs101: move pinctrl-* properties after clocks
arm64: dts: exynos: gs101: move serial_0 pinctrl-0/names to dtsi
arm64: dts: exynos: gs101: reorder pinctrl-* properties
arm64: dts: exynos850: Add CPU clocks
arm64: dts: exynosautov9: specify the SPI FIFO depth
arm64: dts: exynos5433: specify the SPI FIFO depth
Merge tag 'samsung-dt-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM changes for v6.10
1. Few cleanups of deprecated properties and node names pointed out by
bindings newly converted to DT schema.
2. Fix S5PV210 NAND node size-cells, pointed out by DT schema.
3. Add FIFO depth to each SPI node so we can avoid matching this through
DTS alias. Difference SPI instances on given SoC have different FIFO
depths.
4. Fix Exynos4212 Galaxy Tab3 usable memory, because stock bootloader is
not telling us truth.
* tag 'samsung-dt-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos4212-tab3: limit usable memory range
ARM: dts: samsung: s5pv210: specify the SPI FIFO depth
ARM: dts: samsung: exynos5420: specify the SPI FIFO depth
ARM: dts: samsung: exynos5250: specify the SPI FIFO depth
ARM: dts: samsung: exynos4: specify the SPI FIFO depth
ARM: dts: samsung: exynos3250: specify the SPI FIFO depth
ARM: dts: samsung: s5pv210: correct onenand size-cells
ARM: dts: samsung: s5pv210: align onenand node name with bindings
ARM: dts: samsung: exynos5800-peach-pi: switch to undeprecated DP HPD GPIOs
ARM: dts: samsung: smdk4412: align keypad node names with dtschema
ARM: dts: samsung: smdk4412: fix keypad no-autorepeat
ARM: dts: samsung: exynos4412-origen: fix keypad no-autorepeat
ARM: dts: samsung: smdkv310: fix keypad no-autorepeat
Merge tag 'omap-for-v6.10/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt
Devicetree changes for omaps for v6.10
Update n900 charge limit, and make use of the clksel binding for dra7
for the clksel clocks and other dpll output related clocks.
* tag 'omap-for-v6.10/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: dra7: Use clksel binding for CTRL_CORE_SMA_SW_0
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_USB
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_PER
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_ABE_PLL_SYS
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_CORE
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_EVE
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_GMAC
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_DRR
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_GPU
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_IVA
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_DSP
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_CORE
ARM: dts: n900: set charge current limit to 950mA
Rob Herring [Wed, 17 Apr 2024 20:38:47 +0000 (15:38 -0500)]
arm/arm64: dts: Drop "arm,armv8-pmuv3" compatible usage
The "arm,armv8-pmuv3" compatible is intended only for s/w models. Primarily,
it doesn't provide any detail on uarch specific events.
There's still remaining cases for CPUs without any corresponding PMU
definition and for big.LITTLE systems which only have a single PMU node
(there should be one per core type).
Merge tag 'renesas-dts-for-v6.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.10
- Add HDMI capture support for the Function expansion board for the
Eagle development board,
- Add PMIC support for the RZ/G2UL SMARC EVK development board,
- Add thermal, more serial ((H)SCIF), and timer (CMT and TMU) support
for the R-Car V4M SoC,
- Add Timer Unit (TMU) support for the R-Mobile APE6, R-Car Gen2, and
RZ/G1 SoCs,
- Miscellaneous fixes and improvements.
Chris Morgan [Thu, 18 Apr 2024 18:16:15 +0000 (13:16 -0500)]
arm64: dts: allwinner: h616: Add NMI device node
Add device node for the H616 Non Maskable Interrupt (NMI) controller.
This controller is present on all H616 boards and derivatives such as
the T507 and H700. Note that on the H616 no NMI pad is exposed.
Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20240418181615.1370179-3-macroalpha82@gmail.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Alain Volmat [Fri, 15 Dec 2023 17:06:13 +0000 (18:06 +0100)]
arm64: dts: st: add i2c2 / i2c8 properties on stm32mp257f-ev1
Add properties for i2c2 and i2c8 available on the stm32mp257f-ev1.
i2c2 is enabled since several devices are attached to it while
i2c8 is kept disabled since only used via the gpio expansion connector.
Raphael Gallais-Pou [Fri, 23 Feb 2024 12:36:48 +0000 (13:36 +0100)]
ARM: dts: stm32: add LTDC support for STM32MP13x SoC family
STM32MP13x SoC family embeds a new version of LTDC (Liquid crystal
display - Thin film transistor) Display Controller.
It provides a parallel digital RGB (red, green, blue) and signals for
horizontal, vertical synchronization, pixel clock and data enable as
output to interface directly to a variety of LCD-TFT panels.
Main features
* 2 input layers blended together to compose the display
* Cropping of layers from any input size and location
* Multiple input pixel formats:
– Predefined ARGB, with 7 formats: ARGB8888, ABGR8888, RGBA8888,
BGRA8888, RGB565, BGR565, RGB888packed.
– Flexible ARGB, allowing any width and location for A,R,G,B
components.
– Predefined YUV, with 3 formats: YUV422-1L (FourCC: YUYV,
Interleaved), YUV420-2L (FourCC: NV12, semi planar), YUV420-3L
(FourCC: Yxx, full planar) with some flexibility on the sequence of
the component.
* Color look-up table (CLUT) up to 256 colors (256x24 bits) per layer
* Color transparency keying
* Composition with flexible window position and size versus output
display
* Blending with flexible layer order and alpha value (per pixel or
constant)
* Background underlying color
* Gamma with non-linear configurable table
* Dithering for output with less bits per component (pseudo-random on
2 bits)
* Polarity inversion for HSync, VSync, and DataEnable outputs
* Output as RGB888 24 bpp or YUV422 16 bpp
* Secure layer (using Layer2) capability, with grouped regs and
additional interrupt set
* Interrupts based on 7 different events
* AXI master interface with long efficient bursts (64 or 128 bytes)
Marek Vasut [Tue, 19 Mar 2024 04:05:06 +0000 (05:05 +0100)]
ARM: dts: stm32: add PWR regulators support on stm32mp131
This patch adds STM32 PWR regulators DT support on stm32mp131.
This requires TFA to clear RCC_SECCFGR, is disabled by default
and can only be enabled on board DT level.
Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Dario Binacchi [Mon, 25 Mar 2024 07:56:28 +0000 (08:56 +0100)]
ARM: dts: stm32: move can3 node from stm32f746 to stm32f769
According to documents [1], [2] and [3], we have 2 CAN devices on the
stm32f746 platform and 3 on the stm32f769 platform. So let's move the
can3 node from stm32f746.dtsi to stm32f769.dtsi.
[1] https://www.st.com/en/microcontrollers-microprocessors/stm32f7-series.html
[2] RM0385: STM32F75xxx and STM32F74xxx advanced Arm®-based 32-bit MCUs
[3] RM0410: STM32F76xxx and STM32F77xxx advanced Arm®-based 32-bit MCUs Fixes: df362914eead ("ARM: dts: stm32: re-add CAN support on stm32f746") Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Gatien Chevallier [Fri, 5 Jan 2024 13:04:03 +0000 (14:04 +0100)]
ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
ETZPC is a firewall controller. Put all peripherals filtered by the
ETZPC as ETZPC subnodes and keep the "simple-bus" compatible for
backward compatibility.
Gatien Chevallier [Fri, 5 Jan 2024 13:04:01 +0000 (14:04 +0100)]
ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
ETZPC is a firewall controller. Put all peripherals filtered by the
ETZPC as ETZPC subnodes and keep the "simple-bus" compatible for
backward compatibility.
Gatien Chevallier [Fri, 5 Jan 2024 13:03:59 +0000 (14:03 +0100)]
arm64: dts: st: add RIFSC as an access controller for STM32MP25x boards
RIFSC is a firewall controller. Add "st,stm32mp25-rifsc" compatible and
reference RIFSC as an access-control-provider. Keep "simple-bus"
compatible backward compatibility.
arm64: dts: rockchip: add dual-role usb3 hosts to rk3588 Tiger-Haikou
Apart from the host-only usb3 controller (host2) the rk3588 also provides
two dual-role controllers. On the Tiger-Haikou combination these are
connected to the lower usb3-host port in host-only mode and the micro-usb3
port for dual-role operation.
Add the necessary controllers, phys to the Tiger-Haikou board and enable
the usb-id extcon.
arm64: dts: rockchip: add usb-id extcon on rk3588 tiger
The Q7 standard specifies a usb-id pin on the connector to distiuish
between host and device mode. Model this via the usb-id extcon binding.
While the pin is part of the Q7 standard, so part of the module, the
extcon stays disabled in the som dtsi and will only be enabled in a
baseboard using it.
arm64: dts: rockchip: Correct the model names for Pine64 boards
Correct the model names of a few Pine64 boards and devices, according
to their official names used on the Pine64 wiki. This ensures consistency
between the officially used names and the names in the source code.
dt-bindings: arm: rockchip: Correct the descriptions for Pine64 boards
Correct the descriptions of a few Pine64 boards and devices, according
to their official names used on the Pine64 wiki. This ensures consistency
between the officially used names and the names in the source code.
arm64: dts: rockchip: add PCIe3 support on rk3588-jaguar
The Jaguar SBC provides an M.2 slot connected to the pcie3 controller.
In contrast to a number of other boards the pcie-refclk is gpio-controlled,
so the necessary clock and is added to the list of pcie3 clocks.
arm64: dts: rockchip: move uart2 pinmux to dtsi on rk3588-tiger
The association of uart2 to the q7-uart pins is part of the module
itself and not the baseboard used. Therefore move the pinctrl over
to the tiger dtsi.
Chris Morgan [Thu, 18 Apr 2024 17:36:27 +0000 (12:36 -0500)]
arm64: dts: rockchip: Add USB-C Support for rk3588s-indiedroid-nova
Add support for the USB-C port on the Indiedroid Nova board. This
port supports USB-C DP Alt mode (not implemented yet in drivers),
but works as a USB XHCI/EHCI/OHCI port.
arm64: dts: rockchip: Correct the model names for Radxa ROCK 5 boards
Correct the descriptions of a few Radxa boards, according to the up-to-date
documentation from Radxa and the detailed explanation from Naoki. [1] To sum
it up, the short naming, as specified by Radxa, is preferred.
dt-bindings: arm: rockchip: Correct the descriptions for Radxa boards
Correct the descriptions of a few Radxa boards, according to the up-to-date
documentation from Radxa and the detailed explanation from Naoki. [1] To sum
it up, the short naming, as specified by Radxa, is preferred.
Add the device node for the Interrupt Controller for External Devices
(INTC-EX) on the Renesas R-Car V4M (R8A779H0) SoC, which serves external
IRQ pins IRQ[0-5].
arm64: dts: renesas: r9a07g043: Move interrupt-parent property to common DTSI
Now that we have added support for IRQC to both RZ/Five and RZ/G2UL SoCs
we can move the interrupt-parent for pinctrl node back to the common
shared r9a07g043.dtsi file.
Andre Przywara [Thu, 18 Apr 2024 10:49:42 +0000 (11:49 +0100)]
arm64: dts: allwinner: Add Tanix TX1 support
The Tanix TX1 is a tiny TV box with the Allwinner H313 SoC. The box
features no Ethernet or an SD card slot, which makes booting from it
somewhat interesting: Pressing the hidden FEL button and using a USB-A
to USB-A cable to upload code from a host PC is one way to run mainline.
The box features:
- Allwinner H313 SoC (4 * Arm Cortex-A53 cores)
- 1 or 2 GB DRAM
- 8 or 16 GB eMMC flash
- SCI S9082H WiFi chip
- HDMI port
- one USB 2.0 port
- 3.5mm AV port
- barrel plug 5V DC input via barrel plug
The devicetree covers most peripherals.
The eMMC did not work properly in HS200 speed mode, so this mode property
is omitted. HS-DDR seems to work fine.
The blue LED is connected to the same GPIO pin as the red LED, just
using the opposite polarity. Apparently there is no way of describing
this in DT, so the red LED is omitted.
Next to the FEL button is a hidden button, that can be pushed by using
something like a paperclip, through the ventilation vents of the case.
Andre Przywara [Thu, 18 Apr 2024 10:49:41 +0000 (11:49 +0100)]
dt-bindings: arm: sunxi: document Tanix TX1 name
The Tanix TX1 is a tiny TV box with the Allwinner H313 SoC, a lower bin
version of the Allwinner H616. It comes with no SD card slot or Ethernet
port.
Add the board/SoC compatible string pair to the list of known boards.
Since the H313 does not look different from a software point of view,
we keep the H616 compatible string.
Krzysztof Kozlowski [Tue, 2 Apr 2024 19:31:47 +0000 (21:31 +0200)]
arm64: dts: hisilicon: hi6220-hikey: drop unit addresses from fixed regulators
Fixed regulators are not part of any MMIO bus, so they should not have
unit addresses. This fixes dtc W=1 warnings:
hi6220-hikey.dts:85.26-92.4: Warning (unit_address_vs_reg): /regulator@0: node has a unit name, but no reg or ranges property
hi6220-hikey.dts:94.27-102.4: Warning (unit_address_vs_reg): /regulator@1: node has a unit name, but no reg or ranges property
hi6220-hikey.dts:104.26-113.4: Warning (unit_address_vs_reg): /regulator@2: node has a unit name, but no reg or ranges property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
adv7533 ports should have "reg" propeties, as reported by dtc W=1
warnings:
hi6220-hikey.dts:516.11-520.6: Warning (unit_address_vs_reg): /soc/i2c@f7102000/adv7533@39/ports/port@0: node has a unit name, but no reg or ranges property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
- Serial console
- mmc0, mmc2 (both microSD card slots on the board)
- All buttons (gpio and lradc based)
- Power LED
- PMIC
- RTC
- USB OTG/gadgets mode
Andre Przywara [Fri, 29 Mar 2024 10:38:25 +0000 (10:38 +0000)]
arm64: dts: allwinner: h616: Fix I2C0 pins
Currently we specify the pins for the I2C0 function as PI6 and PI7, even
though they are actually PI5 and PI6. Linux' pinctrl driver and the H616
user manual confirm this.
Fix the pin names in the pins property. None of the existing DTs in the
tree seems to use I2C0, which explains why this went unnoticed.
Frank Oltmanns [Sun, 10 Mar 2024 13:21:15 +0000 (14:21 +0100)]
arm64: dts: allwinner: a64: Run GPU at 432 MHz
The Allwinner A64's GPU has currently three operating points. However,
the BSP runs the GPU fixed at 432 MHz. In addition, at least one of the
devices using that SoC - the pinephone - shows unstabilities (see link)
that can be circumvented by running the GPU at a fixed rate.
Therefore, remove the other two operating points from the GPU OPP table,
so that the GPU runs at a fixed rate of 432 MHz.
Krzysztof Kozlowski [Sun, 17 Mar 2024 18:41:30 +0000 (19:41 +0100)]
arm: dts: allwinner: drop underscore in node names
Underscores should not be used in node names (dtc with W=2 warns about
them), so replace them with hyphens. Use also generic name for pwrseq
node, because generic naming is favored by Devicetree spec. All the
clocks affected by this change use clock-output-names, so resulting
clock name should not change. Functional impact checked with comparing
before/after DTBs with dtx_diff and fdtdump.
Krzysztof Kozlowski [Sun, 17 Mar 2024 18:41:29 +0000 (19:41 +0100)]
arm64: dts: allwinner: Orange Pi: delete node by phandle
Delete node via phandle, not via full node path, to avoid easy mistakes
- if original node name changes, such deletion would be ineffective and
not reported by the dtc as error.
Krzysztof Kozlowski [Sun, 17 Mar 2024 18:41:28 +0000 (19:41 +0100)]
arm64: dts: allwinner: drop underscore in node names
Underscores should not be used in node names (dtc with W=2 warns about
them), so replace them with hyphens. Use also generic name for pwrseq
node, because generic naming is favored by Devicetree spec. All the
clocks affected by this change use clock-output-names, so resulting
clock name should not change. Functional impact checked with comparing
before/after DTBs with dtx_diff and fdtdump.
Krzysztof Kozlowski [Sun, 17 Mar 2024 18:41:27 +0000 (19:41 +0100)]
arm64: dts: allwinner: Pine H64: correctly remove reg_gmac_3v3
There is no "reg_gmac_3v3" device node in sun50i-h6-pine-h64.dts,
although there is "gmac-3v3" with "reg_gmac_3v3" label, so let's assume
author wanted to remove that node. Delete node via phandle, not via
full node path, to fix this.
Fixes: f33a91175029 ("arm64: dts: allwinner: add pineh64 model B") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20240317184130.157695-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Muhammed Efe Cetin [Mon, 19 Feb 2024 22:34:21 +0000 (01:34 +0300)]
arm64: dts: rockchip: Add ir receiver and leds to Khadas Edge 2
Khadas Edge 2 exposes IR receiver pins as same as TF card via EXTIO. The
IR receiver is connected to MCU and SoC.
The board also has 2 PWM RGB leds. One is controlled by MCU and the
other is controlled by SoC. This commit adds support for the led
controlled by SoC using pwm-leds.
projects / users / jedix / linux-maple.git / log