Richard Fitzgerald [Wed, 16 Apr 2025 12:24:22 +0000 (13:24 +0100)]
firmware: cs_dsp: Add some sanity-checking to test harness
Add sanity checking to some test harness functions to help catch bugs
in the test code. This consists of checking the range of some arguments
and checking that reads from the dummy regmap succeed.
Most of the harness code already had sanity-checking but there were a
few places where it was missing or was assumed that the test could be
trusted to pass valid values.
Shuming Fan [Wed, 16 Apr 2025 09:25:28 +0000 (17:25 +0800)]
ASoC: rt722: fix pop noise at the beginning of headphone playback
This patch added the function_status check to avoid the calibration again.
The codec driver reinitializes when the 'FUNCTION_NEEDS_INITIALIZATION' flag raises.
Richard Fitzgerald [Wed, 16 Apr 2025 12:16:04 +0000 (13:16 +0100)]
ASoC: cs-amp-lib-test: Use faux bus instead of creating a dummy platform device
Change the code to use faux bus for the dummy codec driver device instead
of creating a platform device. Also use KUnit automatic resource cleanup to
destroy the device instead of doing it "manually" in a test case exit()
function.
Mark Brown [Tue, 15 Apr 2025 20:23:56 +0000 (21:23 +0100)]
ASoC: skip the endpoint that doesn't present and
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
A codec endpoint may not be used. We could check the present SDCA
functions to know if the endpoint is used or not. Skip the endpoint
which is not used. And load the topology dynamically for each endpoint.
With this feature, we don't need to use the quirk to determine the
existence of the optional codec DAIs.
Richard Fitzgerald [Tue, 15 Apr 2025 13:18:37 +0000 (14:18 +0100)]
ASoC: cs-amp-lib-test: Use flex_array_size()
Use flex_array_size() when calculating the number of bytes argument to
get_random_bytes(). This replaces a calculation based on passing sizeof()
the expected type of the destination.
Richard Fitzgerald [Tue, 15 Apr 2025 11:50:16 +0000 (12:50 +0100)]
ASoC: cs48l32: Add driver for Cirrus Logic CS48L32 audio DSP
Add a codec driver for the Cirrus Logic CS48L32 audio DSP.
The CS48L32 is a low-power audio DSP with microphone inputs for
"Always on Voice" (i.e. voice trigger) and voice command processing.
It has a programmable Halo Core DSP and a variety of power-efficient
fixed-function audio processors, with configurable digital mixing
and routing.
There are two I2S/TDM audio serial ports.
Four analogue inputs are available through IN1. These feed into a
2-channel ADC through an analogue mux. There is an ALSA control for
each IN1 ADC channel to select which analogue input to use.
A dedicated digital mic (DMIC) PDM input is available on IN2.
Two PDM outputs can feed DMIC inputs on another codec or a host DMIC/PDM
input.
An on-board regulator provides a power supply or bias voltage to
attached microphones. Three switchable MICBIAS outputs are fed from this
allowing only the microphone in use to be powered-up. There are DAPM
widgets for these outputs: MICBIAS1A, MICBIAS1B and MICBIAS1C. The machine
driver must create a DAPM route from the required MICBIAS1x widget to the
INn input widgets to make the MICBIAS switch on when the audio input is
powered-up. For example if the microphone feeding CS48L32 pin IN1LN_1 is
powered from MICBIAS1A, the machine driver must create the path:
(sink) IN1LN_1 <----- (source) MICBIAS1A
Co-developed-by: Stuart Henderson <stuarth@opensource.cirrus.com> Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com> Co-developed-by: Qi Zhou <qi.zhou@cirrus.com> Signed-off-by: Qi Zhou <qi.zhou@cirrus.com> Co-developed-by: Piotr Stankiewicz <piotrs@opensource.cirrus.com> Signed-off-by: Piotr Stankiewicz <piotrs@opensource.cirrus.com> Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://patch.msgid.link/20250415115016.505777-3-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
The CS48L32 is an Audio DSP with microphone inputs and SPI
control interface. It has a programmable DSP and a variety of
power-efficient fixed-function audio processors, with configurable
digital mixing and routing.
Most properties are core properties: supply regulators, gpios, clocks,
interrupt parent and SPI interface. The custom properties define
the configuration of the microphone inputs to match what is physically
attached to them.
ASoC: cs-amp-lib: Annotate struct cirrus_amp_efi_data with __counted_by()
Add the __counted_by() compiler attribute to the flexible array member
'data' to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
ASoC: cs-amp-lib: Replace offsetof() with struct_size()
Use struct_size() to calculate the number of bytes to allocate and used
by 'cirrus_amp_efi_data'. Compared to offsetof(), struct_size() provides
additional compile-time checks (e.g., __must_be_array()).
ASoC: simple-card-utils: fixup dlc->xxx handling for error case
Current graph_util_parse_dai() has 2 issue for dlc->xxx handling.
1) dlc->xxx might be filled if snd_soc_get_dai_via_args() (A) works.
In such case it will fill dlc->xxx first (B), and detect error
after that (C). We need to fill dlc->xxx in success case only.
(A) dai = snd_soc_get_dai_via_args(&args);
if (dai) {
ret = -ENOMEM;
^ dlc->of_node = ...
(B) dlc->dai_name = ...
v dlc->dai_args = ...
(C) if (!dlc->dai_args)
goto end;
...
}
2) graph_util_parse_dai() itself has 2 patterns (X)(Y) to fill dlc->xxx.
Both case, we need to call of_node_put(node) (Z) in error case, but we
are calling it only in (Y) case.
int graph_util_parse_dai(...)
{
...
dai = snd_soc_get_dai_via_args(&args);
if (dai) {
...
^ dlc->of_node = ...
(X) dlc->dai_name = ...
v dlc->dai_args = ...
...
}
...
(Y) ret = snd_soc_get_dlc(&args, dlc);
if (ret < 0) {
(Z) of_node_put(node);
...
}
...
}
This patch fixup both case. Make it easy to understand, update
lavel "end" to "err", too.
Mark Brown [Mon, 14 Apr 2025 10:24:01 +0000 (11:24 +0100)]
Add support for Loongson-1 AC97
Merge series from Keguang Zhang <keguang.zhang@gmail.com>:
Add the driver and dt-binding document for Loongson-1 AC97.
Add the dt-binding document for Realtek ALC203 Codec.
Add DT support for the AC97 generic codec driver.
Mark Brown [Mon, 14 Apr 2025 10:23:57 +0000 (11:23 +0100)]
ASoC: convert GPIO chips to using new value setters
Merge series from Bartosz Golaszewski <brgl@bgdev.pl>:
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. We're in the process of
converting all GPIO drivers to using the new API. This series converts
all ASoC GPIO controllers.
Mark Brown [Mon, 14 Apr 2025 10:23:48 +0000 (11:23 +0100)]
ASoC: tas27{64,70}: improve support for Apple codec
Merge series from James Calligeros <jcalligeros99@gmail.com>:
This series introduces a number of changes to the drivers for
the Texas Instruments TAS2764 and TAS2770 amplifiers in order to
introduce (and improve in the case of TAS2770) support for the
variants of these amps found in Apple Silicon Macs.
Apple's variant of TAS2764 is known as SN012776, and as always with
Apple is a subtly incompatible variant with a number of quirks. It
is not publicly available. The TAS2770 variant is known as TAS5770L,
and does not require incompatible handling.
Much as with the Cirrus codec patches, I do not
expect that we will get any official acknowledgement that these parts
exist from TI, however I would be delighted to be proven wrong.
This series has been living in the downstream Asahi kernel tree[1]
for over two years, and has been tested by many thousands of users
by this point[2].
v4 drops the TDM idle TX slot behaviour patches. I experimented with
the API discussed in v3, however this did not work on any of the machines
I tested it with. More tweaking is probably needed.
ASoC: soc_sdw_utils: skip the endpoint that doesn't present
A codec endpoint may not be used. We could check the present SDCA
functions to know if the endpoint is used or not. Skip the endpoint
which is not used.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://patch.msgid.link/20250414063239.85200-12-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Currently asoc_sdw_get_codec_name will return codec_info->codec_name if
it is set. However, in some case we need the sdw codec name no matter if
codec_info->codec_name is set or not.
_asoc_sdw_get_codec_name() will be used in the follow up commit.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://patch.msgid.link/20250414063239.85200-11-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, we always use single topology file to describe the widgets.
However, with SDCA, we want to be able to load sub-topologies based on
the supported device functions.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://patch.msgid.link/20250414063239.85200-5-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
We always use a single topology that contains all PCM devices belonging
to a machine configuration.
However, with SDCA, we want to be able to load function topologies based
on the supported device functions. This change is in preparation for
loading those function topologies.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://patch.msgid.link/20250414063239.85200-4-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
James Calligeros [Sat, 5 Apr 2025 23:15:12 +0000 (09:15 +1000)]
ASoC: tas2764: expose die temp to hwmon
TAS2764 contains an ADC that reports the chip's die temperature.
The temperature in degrees Celsius is yielded by subtracting 93
from the raw value reported by the ADC.
Expose the codec die temperature to the hwmon interface.
The chip will initialise the temperature register to 2.6 *C
to avoid triggering over temp protection. As the ADC is powered
down during software shutdown, this value will persist until the
chip is fully powered up (e.g. when the PCM it's attached to is
opened). When the chip is powered back down, the last value sampled
will persist in the register.
James Calligeros [Sat, 5 Apr 2025 23:15:11 +0000 (09:15 +1000)]
ASoC: tas2770: expose die temp to hwmon
TAS2770 includes an ADC which reports the chip's die temperature.
As per the datasheet, the temperature in degrees Celsius is derived
by taking the raw value stored in the ADC's registers, dividing by 16,
then subtracting 93.
Create and register a hwmon device to expose the chip's die temperature
to the hwmon interface.
The ADC is shut down during software shutdown mode, and its registers
are initialised to 0 on reset. This means that the die temperature will
read -93 *C until the chip has been fully powered up at least once (e.g.
the PCM its attached to is opened). Once the chip is put into software
shutdown again, the ADC will also shut down. The last value sampled
before this happens will persist in the ADC's registers.
Martin Povišer [Sat, 5 Apr 2025 23:15:10 +0000 (09:15 +1000)]
ASoC: tas2764: Apply Apple quirks
Apple's SN012776 driver has some peculiar aspects to its behavior that
are suspected to work around issues in the codec part. Add a module
parameter for enabling individual quirks that should be imitated after
the Apple driver.
Setting some of these by default seems to be required. For example,
setting 0xf fixes an issue with transient overcurrent errors which
can crash the chip until the next system reboot. To be safe, let's
enable all of them by default.
Reviewed-by: Neal Gompa <neal@gompa.dev> Co-developed-by: Hector Martin <marcan@marcan.st> Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Co-developed-by: James Calligeros <jcalligeros99@gmail.com> Signed-off-by: James Calligeros <jcalligeros99@gmail.com> Link: https://patch.msgid.link/20250406-apple-codec-changes-v5-6-50a00ec850a3@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
Hector Martin [Sat, 5 Apr 2025 23:15:08 +0000 (09:15 +1000)]
ASoC: tas2764: Enable main IRQs
IRQ handling was added in commit dae191fb957f ("ASoC: tas2764: Add IRQ
handling") however that same commit masks all interrupts coming from
the chip. Unmask the "main" interrupts so that we can see and
deal with a number of errors including clock, voltage, and current.
Fixes: dae191fb957f ("ASoC: tas2764: Add IRQ handling") Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: James Calligeros <jcalligeros99@gmail.com> Link: https://patch.msgid.link/20250406-apple-codec-changes-v5-4-50a00ec850a3@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
Martin Povišer [Sat, 5 Apr 2025 23:15:07 +0000 (09:15 +1000)]
ASoC: tas2764: Reinit cache on part reset
When the part is reset in component_probe, do not forget to reinit the
regcache, otherwise the cache can get out of sync with the part's
actual state. This fix is similar to commit 0a0342ede303
("ASoC: tas2770: Reinit regcache on reset") which concerned the
tas2770 driver.
Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764") Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Signed-off-by: James Calligeros <jcalligeros99@gmail.com> Link: https://patch.msgid.link/20250406-apple-codec-changes-v5-3-50a00ec850a3@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
Hector Martin [Sat, 5 Apr 2025 23:15:06 +0000 (09:15 +1000)]
ASoC: tas2770: Support setting the PDM TX slot
We don't actually support configuring the PDM input right now. Rather,
this is useful as a hack.
On Apple Silicon machines, amps are split between two I2S buses which
are logically ANDed internally at the SoC. Odd and even slot groups are
driven by amps on either bus respectively. Since the signals are ANDed,
unused slot groups must be driven as zero to avoid corrupting the data
from the other side.
On most recent machines (TAS2764-based), this is accomplished using the
"SDOUT zero mask" feature of that chip. Unfortunately, TAS2770 does not
support this. It does support zeroing out *all* unused slots, which
works well for machines with a single amp per I2S bus. That is all,
except one.
The 13" M1 MacBook Pro is the only machine using TAS2770 and two amps
per I2S bus:
L Bus: SPK0I SPK0V Hi-Z Hi-Z SPK2I SPK2V Hi-Z Hi-Z
R Bus: Hi-Z Hi-Z SPK1I SPK2V Hi-Z Hi-Z SPK3I SPK3V
To ensure uncorrupted data, we need to force all the Hi-Z periods to
zero. We cannot use the "force all zero" feature, as that would cause a
bus conflict between both amps. We can use the pull-down feature, but
that leaves a few bits of garbage on the trailing edge of the speaker
data, since the pull-down is weak.
This is where the PDM transmit feature comes in. With PDM grounded and
disabled (the default state), the PDM slot is transmitted as all zeroes.
We can use that to force a zero 16-bit slot after the voltage data for
each speaker, cleaning it up. Then the pull-down ensures the line stays
low for the subsequent slot:
L Bus: SPK0I SPK0V PDM0 PulDn SPK2I SPK2V PDM0 PulDn
R Bus: PDM0 PulDn SPK1I SPK2V PDM0 PulDn SPK3I SPK3V
Yes, this is a horrible hack, but it beats adding dummy slots that would
be visible to the userspace capture side. There may be some other way to
fix the logical AND behavior on the MCA side... that would make this
unnecessary.
("How does Apple deal with this"? - they don't, macOS does not use
IVSENSE on TAS2770 machines even though it's physically wired up,
but we want to do so on Linux.)
Hector Martin [Sat, 5 Apr 2025 23:15:05 +0000 (09:15 +1000)]
ASoC: tas2770: Power cycle amp on ISENSE/VSENSE change
The ISENSE/VSENSE blocks are only powered up when the amplifier
transitions from shutdown to active. This means that if those controls
are flipped on while the amplifier is already playing back audio, they
will have no effect.
Fix this by forcing a power cycle around transitions in those controls.
Merge tag 'erofs-for-6.15-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Properly handle errors when file-backed I/O fails
- Fix compilation issues on ARM platform (arm-linux-gnueabi)
- Fix parsing of encoded extents
- Minor cleanup
* tag 'erofs-for-6.15-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: remove duplicate code
erofs: fix encoded extents handling
erofs: add __packed annotation to union(__le16..)
erofs: set error to bio if file-backed IO fails
Merge tag 'ext4_for_linus-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"A few more miscellaneous ext4 bug fixes and cleanups including some
syzbot failures and fixing a stale file handing refeencing an inode
previously used as a regular file, but which has been deleted and
reused as an ea_inode would result in ext4 erroneously considering
this a case of fs corruption"
* tag 'ext4_for_linus-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix off-by-one error in do_split
ext4: make block validity check resistent to sb bh corruption
ext4: avoid -Wflex-array-member-not-at-end warning
Documentation: ext4: Add fields to ext4_super_block documentation
ext4: don't treat fhandle lookup of ea_inode as FS corruption
Syzkaller detected a use-after-free issue in ext4_insert_dentry that was
caused by out-of-bounds access due to incorrect splitting in do_split.
BUG: KASAN: use-after-free in ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109
Write of size 251 at addr ffff888074572f14 by task syz-executor335/5847
The following loop is located right above 'if' statement.
for (i = count-1; i >= 0; i--) {
/* is more than half of this entry in 2nd half of the block? */
if (size + map[i].size/2 > blocksize/2)
break;
size += map[i].size;
move++;
}
'i' in this case could go down to -1, in which case sum of active entries
wouldn't exceed half the block size, but previous behaviour would also do
split in half if sum would exceed at the very last block, which in case of
having too many long name files in a single block could lead to
out-of-bounds access and following use-after-free.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Cc: stable@vger.kernel.org Fixes: 5872331b3d91 ("ext4: fix potential negative array index in do_split()") Signed-off-by: Artem Sadovnikov <a.sadovnikov@ispras.ru> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20250404082804.2567-3-a.sadovnikov@ispras.ru Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ojaswin Mujoo [Fri, 28 Mar 2025 06:24:52 +0000 (11:54 +0530)]
ext4: make block validity check resistent to sb bh corruption
Block validity checks need to be skipped in case they are called
for journal blocks since they are part of system's protected
zone.
Currently, this is done by checking inode->ino against
sbi->s_es->s_journal_inum, which is a direct read from the ext4 sb
buffer head. If someone modifies this underneath us then the
s_journal_inum field might get corrupted. To prevent against this,
change the check to directly compare the inode with journal->j_inode.
**Slight change in behavior**: During journal init path,
check_block_validity etc might be called for journal inode when
sbi->s_journal is not set yet. In this case we now proceed with
ext4_inode_block_valid() instead of returning early. Since systems zones
have not been set yet, it is okay to proceed so we can perform basic
checks on the blocks.
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the `DEFINE_RAW_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warning:
fs/ext4/mballoc.c:3041:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <kees@kernel.org> Link: https://patch.msgid.link/Z-SF97N3AxcIMlSi@kspp Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Tom Vierjahn [Mon, 24 Mar 2025 22:09:30 +0000 (23:09 +0100)]
Documentation: ext4: Add fields to ext4_super_block documentation
Documentation and implementation of the ext4 super block have
slightly diverged: Padding has been removed in order to make room for
new fields that are still missing in the documentation.
Add the new fields s_encryption_level, s_first_error_errorcode,
s_last_error_errorcode to the documentation of the ext4 super block.
Fixes: f542fbe8d5e8 ("ext4 crypto: reserve codepoints used by the ext4 encryption feature") Fixes: 878520ac45f9 ("ext4: save the error code which triggered an ext4_error() in the superblock") Signed-off-by: Tom Vierjahn <tom.vierjahn@acm.org> Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> Link: https://patch.msgid.link/20250324221004.5268-1-tom.vierjahn@acm.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Merge tag 'trace-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Hide get_vm_area() from MMUless builds
The function get_vm_area() is not defined when CONFIG_MMU is not
defined. Hide that function within #ifdef CONFIG_MMU.
- Fix output of synthetic events when they have dynamic strings
The print fmt of the synthetic event's format file use to have "%.*s"
for dynamic size strings even though the user space exported
arguments had only __get_str() macro that provided just a nul
terminated string. This was fixed so that user space could parse this
properly.
But the reason that it had "%.*s" was because internally it provided
the maximum size of the string as one of the arguments. The fix that
replaced "%.*s" with "%s" caused the trace output (when the kernel
reads the event) to write "(efault)" as it would now read the length
of the string as "%s".
As the string provided is always nul terminated, there's no reason
for the internal code to use "%.*s" anyway. Just remove the length
argument to match the "%s" that is now in the format.
- Fix the ftrace subops hash logic of the manager ops hash
The function_graph uses the ftrace subops code. The subops code is a
way to have a single ftrace_ops registered with ftrace to determine
what functions will call the ftrace_ops callback. More than one user
of function graph can register a ftrace_ops with it. The function
graph infrastructure will then add this ftrace_ops as a subops with
the main ftrace_ops it registers with ftrace. This is because the
functions will always call the function graph callback which in turn
calls the subops ftrace_ops callbacks.
The main ftrace_ops must add a callback to all the functions that the
subops want a callback from. When a subops is registered, it will
update the main ftrace_ops hash to include the functions it wants.
This is the logic that was broken.
The ftrace_ops hash has a "filter_hash" and a "notrace_hash" where
all the functions in the filter_hash but not in the notrace_hash are
attached by ftrace. The original logic would have the main ftrace_ops
filter_hash be a union of all the subops filter_hashes and the main
notrace_hash would be a intersect of all the subops filter hashes.
But this was incorrect because the notrace hash depends on the
filter_hash it is associated to and not the union of all
filter_hashes.
Instead, when a subops is added, just include all the functions of
the subops hash that are in its filter_hash but not in its
notrace_hash. The main subops hash should not use its notrace hash,
unless all of its subops hashes have an empty filter_hash (which
means to attach to all functions), and then, and only then, the main
ftrace_ops notrace hash can be the intersect of all the subops
hashes.
This not only fixes the bug, but also simplifies the code.
- Add a selftest to better test the subops filtering
Add a selftest that would catch the bug fixed by the above change.
- Fix extra newline printed in function tracing with retval
The function parameter code changed the output logic slightly and
called print_graph_retval() and also printed a newline. The
print_graph_retval() also prints a newline which caused blank lines
to be printed in the function graph tracer when retval was added.
This caused one of the selftests to fail if retvals were enabled.
Instead remove the new line output from print_graph_retval() and have
the callers always print the new line so that it doesn't have to do
special logic if it calls print_graph_retval() or not.
- Fix out-of-bound memory access in the runtime verifier
When rv_is_container_monitor() is called on the last entry on the
link list it references the next entry, which is the list head and
causes an out-of-bound memory access.
* tag 'trace-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix out-of-bound memory access in rv_is_container_monitor()
ftrace: Do not have print_graph_retval() add a newline
tracing/selftest: Add test to better test subops filtering of function graph
ftrace: Fix accounting of subop hashes
ftrace: Properly merge notrace hashes
tracing: Do not add length to print format in synthetic events
tracing: Hide get_vm_area() from MMUless builds
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Followup fixes for resilient spinlock (Kumar Kartikeya Dwivedi):
- Make res_spin_lock test less verbose, since it was spamming BPF
CI on failure, and make the check for AA deadlock stronger
- Fix rebasing mistake and use architecture provided
res_smp_cond_load_acquire
- Convert BPF maps (queue_stack and ringbuf) to resilient spinlock
to address long standing syzbot reports
- Make sure that classic BPF load instruction from SKF_[NET|LL]_OFF
offsets works when skb is fragmeneted (Willem de Bruijn)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Convert ringbuf map to rqspinlock
bpf: Convert queue_stack map to rqspinlock
bpf: Use architecture provided res_smp_cond_load_acquire
selftests/bpf: Make res_spin_lock AA test condition stronger
selftests/net: test sk_filter support for SKF_NET_OFF on frags
bpf: support SKF_NET_OFF and SKF_LL_OFF on skb frags
selftests/bpf: Make res_spin_lock test less verbose
Nam Cao [Fri, 11 Apr 2025 07:37:17 +0000 (09:37 +0200)]
rv: Fix out-of-bound memory access in rv_is_container_monitor()
When rv_is_container_monitor() is called on the last monitor in
rv_monitors_list, KASAN yells:
BUG: KASAN: global-out-of-bounds in rv_is_container_monitor+0x101/0x110
Read of size 8 at addr ffffffff97c7c798 by task setup/221
The buggy address belongs to the variable:
rv_monitors_list+0x18/0x40
This is due to list_next_entry() is called on the last entry in the list.
It wraps around to the first list_head, and the first list_head is not
embedded in struct rv_monitor_def.
Fix it by checking if the monitor is last in the list.
Steven Rostedt [Fri, 11 Apr 2025 17:30:15 +0000 (13:30 -0400)]
ftrace: Do not have print_graph_retval() add a newline
The retval and retaddr options for function_graph tracer will add a
comment at the end of a function for both leaf and non leaf functions that
looks like:
__wake_up_common(); /* ret=0x1 */
} /* pick_next_task_fair ret=0x0 */
The function print_graph_retval() adds a newline after the "*/". But if
that's not called, the caller function needs to make sure there's a
newline added.
This is confusing and when the function parameters code was added, it
added a newline even when calling print_graph_retval() as the fact that
the print_graph_retval() function prints a newline isn't obvious.
This caused an extra newline to be printed and that made it fail the
selftests when the retval option was set, as the selftests were not
expecting blank lines being injected into the trace.
Instead of having print_graph_retval() print a newline, just have the
caller always print the newline regardless if it calls print_graph_retval()
or not. This not only fixes this bug, but it also simplifies the code.
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20250411133015.015ca393@gandalf.local.home Reported-by: Mark Brown <broonie@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Closes: https://lore.kernel.org/all/ccc40f2b-4b9e-4abd-8daf-d22fce2a86f0@sirena.org.uk/ Fixes: ff5c9c576e754 ("ftrace: Add support for function argument to graph tracer") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Merge tag 'pwm/for-6.15-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fixes from Uwe Kleine-König:
"A set of fixes for pwm core and various drivers
The first three patches handle clk_get_rate() returning 0 (which might
happen for example if the CCF is disabled). The first of these was
found because this triggered a warning with clang, the two others by
looking for similar issues in other drivers.
The remaining three fixes address issues in the new waveform pwm API.
Now that I worked on this a bit more, the finer details and corner
cases are better understood and the code is fixed accordingly"
* tag 'pwm/for-6.15-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: axi-pwmgen: Let .round_waveform_tohw() signal when request was rounded up
pwm: stm32: Search an appropriate duty_cycle if period cannot be modified
pwm: Let pwm_set_waveform() succeed even if lowlevel driver rounded up
pwm: fsl-ftm: Handle clk_get_rate() returning 0
pwm: rcar: Improve register calculation
pwm: mediatek: Prevent divide-by-zero in pwm_mediatek_config()
Merge tag 'v6.15-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Fix multichannel decryption UAF
- Fix regression mounting to onedrive shares
- Fix missing mount option check for posix vs. noposix
- Fix version field in WSL symlinks
- Three minor cleanup to reparse point handling
- SMB1 fix for WSL special files
- SMB1 Kerberos fix
- Add SMB3 defines for two new FS attributes
* tag 'v6.15-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: Add defines for two new FileSystemAttributes
cifs: Fix querying of WSL CHR and BLK reparse points over SMB1
cifs: Split parse_reparse_point callback to functions: get buffer and parse buffer
cifs: Improve handling of name surrogate reparse points in reparse.c
cifs: Remove explicit handling of IO_REPARSE_TAG_MOUNT_POINT in inode.c
cifs: Fix encoding of SMB1 Session Setup Kerberos Request in non-UNICODE mode
smb: client: fix UAF in decryption with multichannel
cifs: Fix support for WSL-style symlinks
smb311 client: fix missing tcon check when mounting with linux/posix extensions
cifs: Ensure that all non-client-specific reparse points are processed by the server
Steven Rostedt [Wed, 9 Apr 2025 15:15:51 +0000 (11:15 -0400)]
tracing/selftest: Add test to better test subops filtering of function graph
A bug was discovered that showed the accounting of the subops of the
ftrace_ops filtering was incorrect. Add a new test to better test the
filtering.
This test creates two instances, where it will add various filters to both
the set_ftrace_filter and the set_ftrace_notrace files and enable
function_graph. Then it looks into the enabled_functions file to make sure
that the filters are behaving correctly.
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Andy Chiu <andybnac@gmail.com> Link: https://lore.kernel.org/20250409152720.380778379@goodmis.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Steven Rostedt [Wed, 9 Apr 2025 15:15:50 +0000 (11:15 -0400)]
ftrace: Fix accounting of subop hashes
The function graph infrastructure uses ftrace to hook to functions. It has
a single ftrace_ops to manage all the users of function graph. Each
individual user (tracing, bpf, fprobes, etc) has its own ftrace_ops to
track the functions it will have its callback called from. These
ftrace_ops are "subops" to the main ftrace_ops of the function graph
infrastructure.
Each ftrace_ops has a filter_hash and a notrace_hash that is defined as:
Only trace functions that are in the filter_hash but not in the
notrace_hash.
If the filter_hash is empty, it means to trace all functions.
If the notrace_hash is empty, it means do not disable any function.
The function graph main ftrace_ops needs to be a superset containing all
the functions to be traced by all the subops it has. The algorithm to
perform this merge was incorrect.
When the first subops was added to the main ops, it simply made the main
ops a copy of the subops (same filter_hash and notrace_hash).
When a second ops was added, it joined the new subops filter_hash with the
main ops filter_hash as a union of the two sets. The intersect between the
new subops notrace_hash and the main ops notrace_hash was created as the
new notrace_hash of the main ops.
The issue here is that it would then start tracing functions than no
subops were tracing. For example if you had two subops that had:
subops 1:
filter_hash = '*sched*' # trace all functions with "sched" in it
notrace_hash = '*time*' # except do not trace functions with "time"
subops 2:
filter_hash = '*lock*' # trace all functions with "lock" in it
notrace_hash = '*clock*' # except do not trace functions with "clock"
The intersect of '*time*' functions with '*clock*' functions could be the
empty set. That means the main ops will be tracing all functions with
'*time*' and all "*clock*" in it!
Instead, modify the algorithm to be a bit simpler and correct.
First, when adding a new subops, even if it's the first one, do not add
the notrace_hash if the filter_hash is not empty. Instead, just add the
functions that are in the filter_hash of the subops but not in the
notrace_hash of the subops into the main ops filter_hash. There's no
reason to add anything to the main ops notrace_hash.
The notrace_hash of the main ops should only be non empty iff all subops
filter_hashes are empty (meaning to trace all functions) and all subops
notrace_hashes include the same functions.
That is, the main ops notrace_hash is empty if any subops filter_hash is
non empty.
The main ops notrace_hash only has content in it if all subops
filter_hashes are empty, and the content are only functions that intersect
all the subops notrace_hashes. If any subops notrace_hash is empty, then
so is the main ops notrace_hash.
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Andy Chiu <andybnac@gmail.com> Link: https://lore.kernel.org/20250409152720.216356767@goodmis.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Andy Chiu [Tue, 8 Apr 2025 16:02:57 +0000 (00:02 +0800)]
ftrace: Properly merge notrace hashes
The global notrace hash should be jointly decided by the intersection of
each subops's notrace hash, but not the filter hash.
Cc: stable@vger.kernel.org Link: https://lore.kernel.org/20250408160258.48563-1-andybnac@gmail.com Fixes: 5fccc7552ccb ("ftrace: Add subops logic to allow one ops to manage many") Signed-off-by: Andy Chiu <andybnac@gmail.com>
[ fixed removing of freeing of filter_hash ] Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Zhangfei Gao [Mon, 17 Mar 2025 01:13:52 +0000 (01:13 +0000)]
PCI: Run quirk_huawei_pcie_sva() before arm_smmu_probe_device()
quirk_huawei_pcie_sva() sets properties needed by arm_smmu_probe_device(),
but bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path")
changed the iommu_probe_device() flow so arm_smmu_probe_device() is now
invoked before the quirk, leading to failures like this:
reg-dummy reg-dummy: late IOMMU probe at driver bind, something fishy here!
WARNING: CPU: 0 PID: 1 at drivers/iommu/iommu.c:449 __iommu_probe_device+0x140/0x570
RIP: 0010:__iommu_probe_device+0x140/0x570
The SR-IOV enumeration ordering changes like this:
The non-SR-IOV case is similar in that pci_device_add() is called from
pci_scan_single_device() in the generic enumeration path and
pci_bus_add_device() is called later, after all host bridges have been
enumerated.
Declare quirk_huawei_pcie_sva() as a header fixup to ensure that it happens
before arm_smmu_probe_device().
Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path") Reported-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Closes: https://lore.kernel.org/all/SJ1PR11MB61295DE21A1184AEE0786E25B9D22@SJ1PR11MB6129.namprd11.prod.outlook.com/ Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
[bhelgaas: commit log, add failure info and reporter] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20250317011352.5806-1-zhangfei.gao@linaro.org
Convert the raw spinlock used by BPF ringbuf to rqspinlock. Currently,
we have an open syzbot report of a potential deadlock. In addition, the
ringbuf can fail to reserve spuriously under contention from NMI
context.
It is potentially attractive to enable unconstrained usage (incl. NMIs)
while ensuring no deadlocks manifest at runtime, perform the conversion
to rqspinlock to achieve this.
This change was benchmarked for BPF ringbuf's multi-producer contention
case on an Intel Sapphire Rapids server, with hyperthreading disabled
and performance governor turned on. 5 warm up runs were done for each
case before obtaining the results.
There's a fair amount of noise in the benchmark, with numbers on reruns
going up and down by 10%, so all changes are in the range of this
disturbance, and we see no major regressions.
Merge tag 'block-6.15-20250411' of git://git.kernel.dk/linux
Pull more block fixes from Jens Axboe:
"Apparently my internal clock was off, or perhaps it was just wishful
thinking, but I sent out block fixes yesterday as my brain assumed it
was Friday. Subsequently, that missed the NVMe fixes that should go
into this weeks release as well. Hence, here's a followup with those,
and another simple fix.
- NVMe pull request via Christoph:
- nvmet fc/fcloop refcounting fixes (Daniel Wagner)
- fix missed namespace/ANA scans (Hannes Reinecke)
- fix a use after free in the new TCP netns support (Kuniyuki
Iwashima)
- fix a NULL instead of false review in multipath (Uday Shankar)
- Use strscpy() for null_blk disk name copy"
* tag 'block-6.15-20250411' of git://git.kernel.dk/linux:
null_blk: Use strscpy() instead of strscpy_pad() in null_add_dev()
nvmet-fc: put ref when assoc->del_work is already scheduled
nvmet-fc: take tgtport reference only once
nvmet-fc: update tgtport ref per assoc
nvmet-fc: inline nvmet_fc_free_hostport
nvmet-fc: inline nvmet_fc_delete_assoc
nvmet-fcloop: add ref counting to lport
nvmet-fcloop: replace kref with refcount
nvmet-fcloop: swap list_add_tail arguments
nvme-tcp: fix use-after-free of netns by kernel TCP socket.
nvme: multipath: fix return value of nvme_available_path
nvme: re-read ANA log page after ns scan completes
nvme: requeue namespace scan on missed AENs
Merge tag 'iommu-fixes-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Fix two crashes, one in core code and a NULL-ptr dereference in the
Mediatek IOMMU driver
- Dma_ops cleanup fix for core code
- Two fixes for Intel VT-d driver:
- Fix posted MSI issue when users change cpu affinity
- Remove invalid set_dma_ops() call in the iommu driver
- Warning fix for Tegra IOMMU driver
- Suspend/Resume fix for Exynos IOMMU driver
- Probe failure fix for Renesas IOMMU driver
- Cosmetic fix
* tag 'iommu-fixes-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/tegra241-cmdqv: Fix warnings due to dmam_free_coherent()
iommu: remove unneeded semicolon
iommu/mediatek: Fix NULL pointer deference in mtk_iommu_device_group
iommu/exynos: Fix suspend/resume with IDENTITY domain
iommu/ipmmu-vmsa: Register in a sensible order
iommu: Clear iommu-dma ops on cleanup
iommu/vt-d: Remove an unnecessary call set_dma_ops()
iommu/vt-d: Wire up irq_ack() to irq_move_irq() for posted MSIs
iommu: Fix crash in report_iommu_fault()
Merge tag 'acpi-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a recent regression in the ACPI button driver, add quirks
related to EC wakeups from suspend-to-idle and fix coding mistakes
related to the usage of sizeof() in the PPTT parser code:
Summary:
- Add suspend-to-idle EC wakeup quirks for Lenovo Go S (Mario
Limonciello)
- Prevent ACPI button from sending spurions KEY_POWER events to user
space in some cases after a recent update (Mario Limonciello)
- Compute the size of a structure instead of the size of a pointer in
two places in the PPTT parser code (Jean-Marc Eurin)"
* tag 'acpi-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI PPTT: Fix coding mistakes in a couple of sizeof() calls
ACPI: EC: Set ec_no_wakeup for Lenovo Go S
ACPI: button: Only send `KEY_POWER` for `ACPI_BUTTON_NOTIFY_STATUS`
Merge tag 's390-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
"Note that besides two bug fixes this includes three commits for IBM
z17, which was announced this week.
- Add IBM z17 bits:
- Setup elf_platform for new machine types
- Allow to compile the kernel with z17 optimizations
- Add new performance counters
- Fix mismatch between indicator bits and queue indexes in virtio CCW code
- Fix double free in pmu setup error path"
* tag 's390-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cpumf: Fix double free on error in cpumf_pmu_event_init()
s390/cpumf: Update CPU Measurement facility extended counter set support
s390: Allow to compile with z17 optimizations
s390: Add z17 elf platform
s390/virtio_ccw: Don't allocate/assign airqs for non-existing queues
null_blk: Use strscpy() instead of strscpy_pad() in null_add_dev()
blk_mq_alloc_disk() already zero-initializes the destination buffer,
making strscpy() sufficient for safely copying the disk's name. The
additional NUL-padding performed by strscpy_pad() is unnecessary.
If the destination buffer has a fixed length, strscpy() automatically
determines its size using sizeof() when the argument is omitted. This
makes the explicit size argument unnecessary.
The source string is also NUL-terminated and meets the __must_be_cstr()
requirement of strscpy().
The test-component driver implements various stub callbacks. One
of the ones it doesn't implement is set_tdm_slot. This has no
functional impact on whether ASoC core believes test-component to
do TDM or not, it just means that any TDM configuration can't
readily be dumped for debugging purposes like it can with the other
callbacks.
Add a stub implementation to allow for this. The output uses dev_info
rather than dev_dbg, to be in line with the set_fmt stub implementation
above.
iommu/tegra241-cmdqv: Fix warnings due to dmam_free_coherent()
Two WARNINGs are observed when SMMU driver rolls back upon failure:
arm-smmu-v3.9.auto: Failed to register iommu
arm-smmu-v3.9.auto: probe with driver arm-smmu-v3 failed with error -22
------------[ cut here ]------------
WARNING: CPU: 5 PID: 1 at kernel/dma/mapping.c:74 dmam_free_coherent+0xc0/0xd8
Call trace:
dmam_free_coherent+0xc0/0xd8 (P)
tegra241_vintf_free_lvcmdq+0x74/0x188
tegra241_cmdqv_remove_vintf+0x60/0x148
tegra241_cmdqv_remove+0x48/0xc8
arm_smmu_impl_remove+0x28/0x60
devm_action_release+0x1c/0x40
------------[ cut here ]------------
128 pages are still in use!
WARNING: CPU: 16 PID: 1 at mm/page_alloc.c:6902 free_contig_range+0x18c/0x1c8
Call trace:
free_contig_range+0x18c/0x1c8 (P)
cma_release+0x154/0x2f0
dma_free_contiguous+0x38/0xa0
dma_direct_free+0x10c/0x248
dma_free_attrs+0x100/0x290
dmam_free_coherent+0x78/0xd8
tegra241_vintf_free_lvcmdq+0x74/0x160
tegra241_cmdqv_remove+0x98/0x198
arm_smmu_impl_remove+0x28/0x60
devm_action_release+0x1c/0x40
This is because the LVCMDQ queue memory are managed by devres, while that
dmam_free_coherent() is called in the context of devm_action_release().
Jason pointed out that "arm_smmu_impl_probe() has mis-ordered the devres
callbacks if ops->device_remove() is going to be manually freeing things
that probe allocated":
https://lore.kernel.org/linux-iommu/20250407174408.GB1722458@nvidia.com/
In fact, tegra241_cmdqv_init_structures() only allocates memory resources
which means any failure that it generates would be similar to -ENOMEM, so
there is no point in having that "falling back to standard SMMU" routine,
as the standard SMMU would likely fail to allocate memory too.
Remove the unwind part in tegra241_cmdqv_init_structures(), and return a
proper error code to ask SMMU driver to call tegra241_cmdqv_remove() via
impl_ops->device_remove(). Then, drop tegra241_vintf_free_lvcmdq() since
devres will take care of that.
Fixes: 483e0bd8883a ("iommu/tegra241-cmdqv: Do not allocate vcmdq until dma_set_mask_and_coherent") Cc: stable@vger.kernel.org Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20250407201908.172225-1-nicolinc@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
iommu/mediatek: Fix NULL pointer deference in mtk_iommu_device_group
Currently, mtk_iommu calls during probe iommu_device_register before
the hw_list from driver data is initialized. Since iommu probing issue
fix, it leads to NULL pointer dereference in mtk_iommu_device_group when
hw_list is accessed with list_first_entry (not null safe).
So, change the call order to ensure iommu_device_register is called
after the driver data are initialized.
Fixes: 9e3a2a643653 ("iommu/mediatek: Adapt sharing and non-sharing pgtable case") Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path") Reviewed-by: Yong Wu <yong.wu@mediatek.com> Tested-by: Chen-Yu Tsai <wenst@chromium.org> # MT8183 Juniper, MT8186 Tentacruel Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com> Link: https://lore.kernel.org/r/20250403-fix-mtk-iommu-error-v2-1-fe8b18f8b0a8@collabora.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
Marek Szyprowski [Tue, 1 Apr 2025 20:27:31 +0000 (22:27 +0200)]
iommu/exynos: Fix suspend/resume with IDENTITY domain
Commit bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe
path") changed the sequence of probing the SYSMMU controller devices and
calls to arm_iommu_attach_device(), what results in resuming SYSMMU
controller earlier, when it is still set to IDENTITY mapping. Such change
revealed the bug in IDENTITY handling in the exynos-iommu driver. When
SYSMMU controller is set to IDENTITY mapping, data->domain is NULL, so
adjust checks in suspend & resume callbacks to handle this case
correctly.
Robin Murphy [Thu, 20 Mar 2025 14:41:27 +0000 (14:41 +0000)]
iommu/ipmmu-vmsa: Register in a sensible order
IPMMU registers almost-initialised instances, but misses assigning the
drvdata to make them fully functional, so initial calls back into
ipmmu_probe_device() are likely to fail unnecessarily. Reorder this to
work as it should, also pruning the long-out-of-date comment and adding
the missing sysfs cleanup on error for good measure.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/53be6667544de65a15415b699e38a9a965692e45.1742481687.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
Robin Murphy [Thu, 10 Apr 2025 11:23:48 +0000 (12:23 +0100)]
iommu: Clear iommu-dma ops on cleanup
If iommu_device_register() encounters an error, it can end up tearing
down already-configured groups and default domains, however this
currently still leaves devices hooked up to iommu-dma (and even
historically the behaviour in this area was at best inconsistent across
architectures/drivers...) Although in the case that an IOMMU is present
whose driver has failed to probe, users cannot necessarily expect DMA to
work anyway, it's still arguable that we should do our best to put
things back as if the IOMMU driver was never there at all, and certainly
the potential for crashing in iommu-dma itself is undesirable. Make sure
we clean up the dev->dma_iommu flag along with everything else.
Sean Christopherson [Thu, 10 Apr 2025 07:32:46 +0000 (15:32 +0800)]
iommu/vt-d: Wire up irq_ack() to irq_move_irq() for posted MSIs
Set the posted MSI irq_chip's irq_ack() hook to irq_move_irq() instead of
a dummy/empty callback so that posted MSIs process pending changes to the
IRQ's SMP affinity. Failure to honor a pending set-affinity results in
userspace being unable to change the effective affinity of the IRQ, as
IRQD_SETAFFINITY_PENDING is never cleared and so irq_set_affinity_locked()
always defers moving the IRQ.
The issue is most easily reproducible by setting /proc/irq/xx/smp_affinity
multiple times in quick succession, as only the first update is likely to
be handled in process context.
Fixes: ed1e48ea4370 ("iommu/vt-d: Enable posted mode for device MSIs") Cc: Robert Lippert <rlippert@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Reported-by: Wentao Yang <wentaoyang@google.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20250321194249.1217961-1-seanjc@google.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
report_iommu_fault() checks for an installed handler comparing the
corresponding field to NULL. It can (and could before) be called for a
domain with a different cookie type - IOMMU_COOKIE_DMA_IOVA, specifically.
Cookie is represented as a union so we may end up with a garbage value
treated there if this happens for a domain with another cookie type.
Formerly there were two exclusive cookie types in the union.
IOMMU_DOMAIN_SVA has a dedicated iommu_report_device_fault().
Call the fault handler only if the passed domain has a required cookie
type.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 6aa63a4ec947 ("iommu: Sort out domain user data") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20250408213342.285955-1-pchelkin@ispras.ru Signed-off-by: Joerg Roedel <jroedel@suse.de>
Merge tag 'drm-fixes-2025-04-11-1' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes, as expected it has a bit more in it than probably usual
for rc2. amdgpu/xe/i915 lead the way with fixes all over for a bunch
of other drivers. Nothing major stands out from what I can see.
tests:
- Clean up struct drm_display_mode in various places
i915:
- Fix scanline offset for LNL+ and BMG+
- Fix GVT unterminated-string-initialization build warning
- Fix DP rate limit when sink doesn't support TPS4
- Handle GDDR + ECC memory type detection
- Fix VRR parameter change check
- Fix fence not released on early probe errors
- Disable render power gating during live selftests
xe:
- Add another BMG PCI ID
- Fix UAFs on migration paths
- Fix shift-out-of-bounds access on TLB invalidation
- Ensure ccs_mode is correctly set on gt reset
- Extend some HW workarounds to Xe3
- Fix PM runtime get/put on sysfs files
- Fix u64 division on 32b
- Fix flickering due to missing L3 invalidations
- Fix missing error code return
amdgpu:
- MES FW version caching fixes
- Only use GTT as a fallback if we already have a backing store
- dma_buf fix
- IP discovery fix
- Replay and PSR with VRR fix
- DC FP fixes
- eDP fixes
- KIQ TLB invalidate fix
- Enable dmem groups support
- Allow pinning VRAM dma bufs if imports can do P2P
- Workload profile fixes
- Prevent possible division by 0 in fan handling
amdkfd:
- Queue reset fixes
imagination:
- Fix overflow
- Fix use-after-free
ivpu:
- Fix suspend/resume
nouveau:
- Do not deref dangling pointer
rockchip:
- Set DP/HDMI registers correctly
udmabuf:
- Fix overflow
virtgpu:
- Set reservation lock on dma-buf import
- Fix error handling in prepare_fb"
* tag 'drm-fixes-2025-04-11-1' of https://gitlab.freedesktop.org/drm/kernel: (58 commits)
drm/rockchip: dw_hdmi_qp: Fix io init for dw_hdmi_qp_rockchip_resume
drm/rockchip: vop2: Fix interface enable/mux setting of DP1 on rk3588
drm/amdgpu/mes12: optimize MES pipe FW version fetching
drm/amd/pm/smu11: Prevent division by zero
drm/amdgpu: cancel gfx idle work in device suspend for s0ix
drm/amd/display: pause the workload setting in dm
drm/amdgpu/pm/swsmu: implement pause workload profile
drm/amdgpu/pm: add workload profile pause helper
drm/i915/huc: Fix fence not released on early probe errors
drm/i915/vrr: Add vrr.vsync_{start, end} in vrr_params_changed
drm/tests: probe-helper: Fix drm_display_mode memory leak
drm/tests: modes: Fix drm_display_mode memory leak
drm/tests: modes: Fix drm_display_mode memory leak
drm/tests: cmdline: Fix drm_display_mode memory leak
drm/tests: modeset: Fix drm_display_mode memory leak
drm/tests: modeset: Fix drm_display_mode memory leak
drm/tests: helpers: Create kunit helper to destroy a drm_display_mode
drm/xe: Restore EIO errno return when GuC PC start fails
drm/xe: Invalidate L3 read-only cachelines for geometry streams too
drm/xe: avoid plain 64-bit division
...
Merge tag 'bcachefs-2025-04-10' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Mostly minor fixes.
Eric Biggers' crypto API conversion is included because of long
standing sporadic crashes - mostly, but not entirely syzbot - in the
crypto API code when calling poly1305, which have been nigh impossible
to reproduce and debug.
His rework deletes the code where we've seen the crashes, so either
it'll be a fix or we'll end up with backtraces we can debug. (Thanks
Eric!)"
* tag 'bcachefs-2025-04-10' of git://evilpiepirate.org/bcachefs:
bcachefs: Use sort_nonatomic() instead of sort()
bcachefs: Remove unnecessary softdep on xxhash
bcachefs: use library APIs for ChaCha20 and Poly1305
bcachefs: Fix duplicate "ro,read_only" in opts at startup
bcachefs: Fix UAF in bchfs_read()
bcachefs: Use cpu_to_le16 for dirent lengths
bcachefs: Fix type for parameter in journal_advance_devs_to_next_bucket
bcachefs: Fix escape sequence in prt_printf
Dave Airlie [Thu, 10 Apr 2025 23:11:04 +0000 (09:11 +1000)]
Merge tag 'drm-xe-fixes-2025-04-10' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Add another BMG PCI ID
- Fix UAFs on migration paths
- Fix shift-out-of-bounds access on TLB invalidation
- Ensure ccs_mode is correctly set on gt reset
- Extend some HW workarounds to Xe3
- Fix PM runtime get/put on sysfs files
- Fix u64 division on 32b
- Fix flickering due to missing L3 invalidations
- Fix missing error code return
projects / users / jedix / linux-maple.git / log