Ilpo Järvinen [Fri, 29 Aug 2025 13:11:09 +0000 (16:11 +0300)]
PCI: Refactor distributing available memory to use loops
pci_bus_distribute_available_resources() and
pci_bridge_distribute_available_resources() retain bridge window resources
and related data needed for distributing the available window in
independent variables for io, memory, and prefetchable memory windows. The
code is essentially the same for all of them and therefore repeated three
times with different variable names.
Refactor pci_bus_distribute_available_resources() to take an array. This
is complicated slightly by the function taking advantage of passing the
struct as value, which cannot be done for arrays in C. Therefore, copy the
data into a local array in the stack in the first loop.
Variable names are (hopefully) improved slightly as well.
Ilpo Järvinen [Fri, 29 Aug 2025 13:11:08 +0000 (16:11 +0300)]
PCI: Use pbus_select_window_for_type() during mem window sizing
__pci_bus_size_bridges() goes to great lengths of helping pbus_size_mem()
in which types it should put into a particular bridge window, requiring
passing up to three resource type into pbus_size_mem().
Instead of having complex logic in __pci_bus_size_bridges() and a
non-straightforward interface between those functions, use
pbus_select_window_for_type() and pbus_select_window() to find the correct
bridge window and compare if the resources belong to that window.
Ilpo Järvinen [Fri, 29 Aug 2025 13:11:07 +0000 (16:11 +0300)]
PCI: Use pbus_select_window() in space available checker
pbus_upstream_space_available() figures out the upstream bridge window
resources on its own. Migrate it to use pbus_select_window().
Note: pbus_select_window() -> pbus_select_window_for_type() calls
find_bus_resource_of_type() for root bus, which does not do parent check
similar to what pbus_upstream_space_available() did earlier, but the
difference does not matter because pbus_upstream_space_available() itself
stops when it encounters the root bus.
Ilpo Järvinen [Fri, 29 Aug 2025 13:11:06 +0000 (16:11 +0300)]
PCI: Rename resource variable from r to res
Resource is going to be passed in as argument aften an upcoming change.
Rename the struct resource variable from "r" to "res" to avoid using one
letter variable name in a function argument.
This rename is made separately to reduce churn in the upcoming change.
Ilpo Järvinen [Fri, 29 Aug 2025 13:11:04 +0000 (16:11 +0300)]
PCI: Use pbus_select_window() during BAR resize
Prior to a BAR resize, __resource_resize_store() loops through the normal
resources of the PCI device and releases those that match to the flags of
the BAR to be resized. This is necessary to allow resizing also the
upstream bridge window as only childless bridge windows can be resized.
While the flags check (mostly) works (if corner cases are ignored), the
more straightforward way is to check if the resources share the bridge
window. Change __resource_resize_store() to do the check using
pbus_select_window().
Ilpo Järvinen [Fri, 29 Aug 2025 13:11:03 +0000 (16:11 +0300)]
PCI: Warn if bridge window cannot be released when resizing BAR
BAR resizing calls to pci_reassign_bridge_resources(), which attempts to
release any upstream bridge window to allow them to accommodate the new BAR
size. The release can only be performed if there are no other child
resources for the bridge window. Previously the code continued silently
when other child resources were detected.
Add pci_warn() to inform user that a bridge window could not be released
because of child resources. As a small bridge window is often the reason
why BAR resize fails, this warning will help to pinpoint to the cause.
Ilpo Järvinen [Fri, 29 Aug 2025 13:11:02 +0000 (16:11 +0300)]
PCI: Fix finding bridge window in pci_reassign_bridge_resources()
pci_reassign_bridge_resources() walks upwards in the PCI bus hierarchy,
locates the relevant bridge window on each level using flags check, and
attempts to release the bridge window. The flags-based check is fragile due
to various fallbacks in the bridge window selection logic. As such, the
algorithm might not locate the correct bridge window.
Refactor pci_reassign_bridge_resources() to determine the correct bridge
window using pbus_select_window(), which contains logic to handle all
fallback cases correctly. Change function prefix to pbus as it now inputs
struct bus and resource for which to locate the bridge window.
The main purpose is to make bridge window selection logic consistent across
the entire PCI core (one step at a time). While this technically also fixes
the commit 8bb705e3e79d ("PCI: Add pci_resize_resource() for resizing
BARs") making the bridge window walk algorithm more robust, the normal
setup having a 64-bit resizable BAR underneath bridge(s) with 64-bit
prefetchable windows does not need to use any fallbacks. As such, the
practical impact is low (requiring BAR resize use case and a non-typical
bridge device).
The way to detect if unrelated resource failed again is left to use the
type based approximation which should not behave worse than before.
Ilpo Järvinen [Fri, 29 Aug 2025 13:11:01 +0000 (16:11 +0300)]
PCI: Add bridge window selection functions
Various places in the PCI core code independently decide into which bridge
window a child resource should be placed. It is hard to see whether these
decisions always end up in agreement, especially in the corner cases, and
in some places it requires complex logic to pass multiple resource types
and/or bridge windows around.
Add pbus_select_window() and pbus_select_window_for_type() for cases where
the former cannot be used so that eventually the same helper can be used to
select the bridge window everywhere. Using the same function ensures the
selected bridge window remains always the same and it can be easily
recalculated in-situ allowing simplifying the interfaces between internal
functions in upcoming changes.
Ilpo Järvinen [Fri, 29 Aug 2025 13:11:00 +0000 (16:11 +0300)]
PCI: Add defines for bridge window indexing
include/linux/pci.h provides PCI_BRIDGE_{IO,MEM,PREF_MEM}_WINDOW defines,
however, they're based on the resource array indexing in the pci_dev
struct. The struct pci_bus also has pointers to those same resources but
they start from zeroth index.
Add PCI_BUS_BRIDGE_{IO,MEM,PREF_MEM}_WINDOW defines to get rid of literal
indexing.
Ilpo Järvinen [Fri, 29 Aug 2025 13:10:59 +0000 (16:10 +0300)]
PCI: Preserve bridge window resource type flags
When a bridge window is found unused or fails to assign, the flags of the
associated resource are cleared. Clearing flags is problematic as it also
removes the type information of the resource which is needed later.
Thus, always preserve the bridge window type flags and use IORESOURCE_UNSET
and IORESOURCE_DISABLED to indicate the status of the bridge window. Also,
when initializing resources, make sure all valid bridge windows do get
their type flags set.
Change various places that relied on resource flags being cleared to check
for IORESOURCE_UNSET and IORESOURCE_DISABLED to allow bridge window
resource to retain their type flags. Add pdev_resource_assignable() and
pdev_resource_should_fit() helpers to filter out disabled bridge windows
during resource fitting; the latter combines more common checks into the
helper.
When reading the bridge windows from the registers, instead of leaving the
resource flags cleared for bridge windows that are not enabled, always
set up the flags and set IORESOURCE_UNSET | IORESOURCE_DISABLED as needed.
When resource fitting or assignment fails for a bridge window resource, or
the bridge window is not needed, mark the resource with IORESOURCE_UNSET or
IORESOURCE_DISABLED, respectively.
Use dummy zero resource in resource_show() for backwards compatibility as
lspci will otherwise misrepresent disabled bridge windows.
This change fixes an issue which highlights the importance of keeping the
resource type flags intact:
At the end of __assign_resources_sorted(), reset_resource() is called,
previously clearing the flags. Later, pci_prepare_next_assign_round()
attempted to release bridge resources using
pci_bus_release_bridge_resources() that calls into
pci_bridge_release_resources() that assumes type flags are still present.
As type flags were cleared, IORESOURCE_MEM_64 was not set leading to
resources under an incorrect bridge window to be released (idx = 1
instead of idx = 2). While the assignments performed later covered this
problem so that the wrongly released resources got assigned in the end,
it was still causing extra release+assign pairs.
There are other reasons why the resource flags should be retained in
upcoming changes too.
Removing the flag reset for non-bridge window resource is left as future
work, in part because it has a much higher regression potential due to
pci_enable_resources() that will start to work also for those resources
then and due to what endpoint drivers might assume about resources.
Despite the Fixes tag, backporting this (at least any time soon) is highly
discouraged. The issue fixed is borderline cosmetic as the later
assignments normally cover the problem entirely. Also there might be
non-obvious dependencies.
Ilpo Järvinen [Fri, 29 Aug 2025 13:10:58 +0000 (16:10 +0300)]
PCI: Enable bridge even if bridge window fails to assign
A normal PCI bridge has multiple bridge windows and not all of them are
always required by devices underneath the bridge. If a Root Port or bridge
does not have a device underneath, no bridge windows get assigned. Yet,
pci_enable_resources() is set to fail indiscriminantly on any resource
assignment failure if the resource is not known to be optional.
In practice, the code in pci_enable_resources() is currently largely
dormant. The kernel sets resource flags to zero for any unused bridge
window and resets flags to zero in case of an resource assignment failure,
which short-circuits pci_enable_resources() because of this check:
if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
continue;
However, an upcoming change to resource flags will alter how bridge window
resource flags behave activating these long dormants checks in
pci_enable_resources().
While complex logic could be built to selectively enable a bridge only
under some conditions, a few versions of such logic were tried during
development of this change and none of them worked satisfactorily. Thus, I
just gave up and decided to enable any bridge regardless of the bridge
windows as there seems to be no clear benefit from not enabling it, but a
major downside as pcieport will not be probed for the bridge if it's not
enabled.
Therefore, change pci_enable_resources() to not check if bridge window
resources remain unassigned. Resource assignment failures are pretty noisy
already so there is no need to log that for bridge windows in
pci_enable_resources().
Ignoring bridge window failures hopefully prevents an obvious source of
regressions when the upcoming change that no longer clears resource flags
for bridge windows is enacted. I've hit this problem even during my own
testing on multiple occasions so I expect it to be a quite common problem.
This can always be revisited later if somebody thinks the enable check for
bridges is not strict enough, but expect a mind-boggling number of
regressions from such a change.
Ilpo Järvinen [Fri, 29 Aug 2025 13:10:57 +0000 (16:10 +0300)]
PCI: Use pci_release_resource() instead of release_resource()
A few places in setup-bus.c call release_resource() directly and end up
duplicating functionality from pci_release_resource() such as parent check,
logging, and clearing the resource. Worse yet, the way the resource is
cleared is inconsistent between different sites.
Convert release_resource() calls into pci_release_resource() to remove code
duplication. This will also make the resource start, end, and flags
behavior consistent, i.e., start address is cleared, and only
IORESOURCE_UNSET is asserted for the resource.
While at it, eliminate the unnecessary initialization of idx variable in
pci_bridge_release_resources().
Ilpo Järvinen [Fri, 29 Aug 2025 13:10:56 +0000 (16:10 +0300)]
PCI: Disable non-claimed bridge window
If clipping or claiming the bridge window fails, the bridge window is left
in a state that does not match the kernel's view on what the bridge window
is.
Disable the bridge window by writing the magic disable value into the Base
and Limit Registers if clipping or claiming failed. To detect if claiming
the resource was successful, add res->parent checks into the bridge setup
functions.
Ilpo Järvinen [Fri, 29 Aug 2025 13:10:55 +0000 (16:10 +0300)]
PCI: Always claim bridge window before its setup
When the claim of a resource fails for the full range in
pci_claim_bridge_resource(), clipping the resource to a smaller size is
attempted. If clipping is successful, the new bridge window is programmed
and only as the last step the code attempts to claim the resource again.
The order of the last two steps is slightly illogical and inconsistent with
the assignment call chains.
If claiming the bridge window after clipping fails, the bridge window that
was set up is left in place.
Rework the logic such that the bridge window is claimed before calling the
relevant bridge setup function. This make the behavior consistent with
resource fitting call chains that always assign the bridge window before
programming it.
If claiming the bridge window fails, the clipped bridge window is no longer
set up but pci_claim_bridge_resource() returns without writing the bridge
window at all.
Ilpo Järvinen [Fri, 29 Aug 2025 13:10:52 +0000 (16:10 +0300)]
MIPS: PCI: Use pci_enable_resources()
pci-legacy.c under MIPS has a copy of pci_enable_resources() named as
pcibios_enable_resources(). Having own copy of same functionality could
lead to inconsistencies in behavior, especially now as
pci_enable_resources() and the bridge window resource flags behavior are
going to be altered by upcoming changes.
The check for !r->start && r->end is already covered by the more generic
checks done in pci_enable_resources().
Call pci_enable_resources() from MIPS's pcibios_enable_device() and remove
pcibios_enable_resources().
Ilpo Järvinen [Fri, 29 Aug 2025 13:10:51 +0000 (16:10 +0300)]
sparc/PCI: Remove pcibios_enable_device() as they do nothing extra
Under arch/sparc/ there are multiple copies of pcibios_enable_device() but
none of those seem to do anything extra beyond what pci_enable_resources()
is supposed to do. These functions could lead to inconsistencies in
behavior, especially now as pci_enable_resources() and the bridge window
resource flags behavior are going to be altered by upcoming changes.
Remove all pcibios_enable_device() from arch/sparc/ so that PCI core can
simply call into pci_enable_resources() instead using its __weak version
of pcibios_enable_device().
Ilpo Järvinen [Fri, 29 Aug 2025 13:10:50 +0000 (16:10 +0300)]
m68k/PCI: Use pci_enable_resources() in pcibios_enable_device()
m68k has a resource enable (check) loop in its pcibios_enable_device()
which for some reason differs from pci_enable_resources(). This could lead
to inconsistencies in behavior, especially now as pci_enable_resources()
and the bridge window resource flags behavior are going to be altered by
upcoming changes.
The check for !r->start && r->end is already covered by the more generic
checks done in pci_enable_resources().
The entire pcibios_enable_device() suspiciously looks copy-paste from some
other arch as also indicated by the preceding comment. However, it also
enables PCI_COMMAND_IO | PCI_COMMAND_MEMORY always for bridges. It is not
clear why that is being done as the commit e93a6bbeb5a5 ("m68k: common PCI
support definitions and code") introducing this code states "Nothing
specific to any PCI implementation in any m68k class CPU hardware yet".
Replace the resource enable loop with a call to pci_enable_resources() and
adjust the Command Register afterwards as it's unclear if that is necessary
or not so keep it for now.
Ilpo Järvinen [Mon, 30 Jun 2025 14:26:41 +0000 (17:26 +0300)]
PCI: Fix failure detection during resource resize
Since 96336ec70264 ("PCI: Perform reset_resource() and build fail list in
sync") the failed list is always built and returned to let the caller
decide what to do with the failures. The caller may want to retry resource
fitting and assignment and before that can happen, the resources should be
restored to their original state (a reset effectively clears the struct
resource), which requires returning them to the failed list so the original
state remains stored in the associated struct pci_dev_resource.
Resource resizing is different from the ordinary resource fitting and
assignment in that it only considers part of the resources. This means
failures for other resource types are not relevant at all and should be
ignored. As resize doesn't unassign such unrelated resources, those
resources ending up in the failed list implies assignment of that
resource must have failed before resize too. The check in
pci_reassign_bridge_resources() to decide if the whole assignment is
successful, however, is based on list emptiness which will cause false
negatives when the failed list has resources with an unrelated type.
If the failed list is not empty, call pci_required_resource_failed() and
extend it to be able to filter on specific resource types too (if
provided).
Calling pci_required_resource_failed() at this point is slightly
problematic because the resource itself is reset when the failed list
is constructed in __assign_resources_sorted(). As a result,
pci_resource_is_optional() does not have access to the original
resource flags. This could be worked around by restoring and
re-resetting the resource around the call to pci_resource_is_optional(),
however, it shouldn't cause issue as resource resizing is meant for
64-bit prefetchable resources according to Christian König (see the
Link which unfortunately doesn't point directly to Christian's reply
because lore didn't store that email at all).
Fixes: 96336ec70264 ("PCI: Perform reset_resource() and build fail list in sync") Link: https://lore.kernel.org/all/c5d1b5d8-8669-5572-75a7-0b480f581ac1@linux.intel.com/ Reported-by: D Scott Phillips <scott@os.amperecomputing.com> Closes: https://lore.kernel.org/all/86plf0lgit.fsf@scott-ph-mail.amperecomputing.com/ Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: D Scott Phillips <scott@os.amperecomputing.com> Reviewed-by: D Scott Phillips <scott@os.amperecomputing.com> Cc: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org # v6.15+ Link: https://patch.msgid.link/20250822123359.16305-4-ilpo.jarvinen@linux.intel.com
Ilpo Järvinen [Mon, 30 Jun 2025 14:26:40 +0000 (17:26 +0300)]
PCI: Fix pdev_resources_assignable() disparity
pdev_sort_resources() uses pdev_resources_assignable() helper to decide if
device's resources cannot be assigned, so it ignores class 0
(PCI_CLASS_NOT_DEFINED) devices. pbus_size_mem(), on the other hand, does
not do the same check. This could lead into a situation where a resource
ends up on realloc_head list but is not on the head list, which in turn
prevents emptying the resource from the realloc_head list in
__assign_resources_sorted().
A non-empty realloc_head is unacceptable because it triggers an internal
sanity check as shown in this log with a device that has class 0
(PCI_CLASS_NOT_DEFINED):
pci 0001:01:00.0: [144d:a5a5] type 00 class 0x000000 PCIe Endpoint
pci 0001:01:00.0: BAR 0 [mem 0x00000000-0x000fffff 64bit]
pci 0001:01:00.0: ROM [mem 0x00000000-0x0000ffff pref]
pcieport 0001:00:00.0: bridge window [mem 0x00100000-0x001fffff] to [bus 01-ff] add_size 100000 add_align 100000
pcieport 0001:00:00.0: bridge window [mem 0x40000000-0x401fffff]: assigned
------------[ cut here ]------------
kernel BUG at drivers/pci/setup-bus.c:2532!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
...
Call trace:
pci_assign_unassigned_bus_resources+0x110/0x114 (P)
pci_rescan_bus+0x28/0x48
Use pdev_resources_assignable() also within pbus_size_mem() to skip
processing of non-assignable resources which removes the disparity in
between what resources pdev_sort_resources() and pbus_size_mem() consider.
As non-assignable resources are no longer processed, they are not added to
the realloc_head list, thus the sanity check no longer triggers.
This disparity problem is very old but only now became apparent after 2499f5348431 ("PCI: Rework optional resource handling") that made the ROM
resources optional when calculating bridge window sizes which required
adding the resource to the realloc_head list. Previously, bridge windows
were just sized larger than necessary.
Ilpo Järvinen [Mon, 30 Jun 2025 14:26:39 +0000 (17:26 +0300)]
PCI: Ensure relaxed tail alignment does not increase min_align
When using relaxed tail alignment for the bridge window, pbus_size_mem()
also tries to minimize min_align, which can under certain scenarios end up
increasing min_align from that found by calculate_mem_align().
Ensure min_align is not increased by the relaxed tail alignment.
Eventually, it would be better to add calculate_relaxed_head_align()
similar to calculate_mem_align() which finds out what alignment can be used
for the head without introducing any gaps into the bridge window to give
flexibility on head address too. But that looks relatively complex so it
requires much more testing than fixing the immediate problem causing a
regression.
Fixes: 67f9085596ee ("PCI: Allow relaxed bridge window tail sizing for optional resources") Reported-by: Rio Liu <rio@r26.me> Closes: https://lore.kernel.org/all/o2bL8MtD_40-lf8GlslTw-AZpUPzm8nmfCnJKvS8RQ3NOzOW1uq1dVCEfRpUjJ2i7G2WjfQhk2IWZ7oGp-7G-jXN4qOdtnyOcjRR0PZWK5I=@r26.me/ Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Rio Liu <rio@r26.me> Cc: stable@vger.kernel.org # v6.15+ Link: https://patch.msgid.link/20250822123359.16305-2-ilpo.jarvinen@linux.intel.com
Linus Torvalds [Sun, 10 Aug 2025 05:51:37 +0000 (08:51 +0300)]
Merge tag 'smp_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull smp fixes from Borislav Petkov:
- Remove an obsolete comment and fix spelling
* tag 'smp_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Remove obsolete comment from takedown_cpu()
smp: Fix spelling in on_each_cpu_cond_mask()'s doc-comment
Linus Torvalds [Sun, 10 Aug 2025 05:46:47 +0000 (08:46 +0300)]
Merge tag 'irq_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix a wrong ioremap size in mvebu-gicp
- Remove yet another compile-test case for a driver which needs an
additional dependency
- Fix a lock inversion scenario in the IRQ unit test suite
- Remove an impossible flag situation in gic-v5
- Do not iounmap resources in gic-v5 which are managed by devm
- Make sure stale, left-over interrupts in mvebu-gicp are cleared on
driver init
- Fix a reference counting mishap in msi-lib
- Fix a dereference-before-null-ptr-check case in the riscv-imsic
irqchip driver
* tag 'irq_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mvebu-gicp: Use resource_size() for ioremap()
irqchip: Build IMX_MU_MSI only on ARM
genirq/test: Resolve irq lock inversion warnings
irqchip/gic-v5: Remove IRQD_RESEND_WHEN_IN_PROGRESS for ITS IRQs
irqchip/gic-v5: iwb: Fix iounmap probe failure path
irqchip/mvebu-gicp: Clear pending interrupts on init
irqchip/msi-lib: Fix fwnode refcount in msi_lib_irq_domain_select()
irqchip/riscv-imsic: Don't dereference before NULL pointer check
Linus Torvalds [Sun, 10 Aug 2025 05:15:32 +0000 (08:15 +0300)]
Merge tag 'x86_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix an interrupt vector setup race which leads to a non-functioning
device
- Add new Intel CPU models *and* a family: 0x12. Finally. Yippie! :-)
* tag 'x86_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Plug vector setup race
x86/cpu: Add new Intel CPU model numbers for Wildcatlake and Novalake
Len Brown [Sun, 10 Aug 2025 01:08:26 +0000 (21:08 -0400)]
tools/power turbostat: version 2025.09.09
Probe and display L3 Cache topology
Add ability to average an added counter
(useful for pre-integrated "counters", such as Watts)
Break the limit of 64 built-in counters.
Assorted bug fixes and minor feature tweaks
/sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/
may be readable by all, but
/sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/current_freq_khz
may be readable only by root.
Non-root turbostat users see complaints in this scenario.
Fail probe of the interface if we can't read current_freq_khz.
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Original-patch-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Zhang Rui [Wed, 11 Jun 2025 06:50:26 +0000 (14:50 +0800)]
tools/power turbostat: Fix DMR support
Together with the RAPL MSRs, there are more MSRs gone on DMR, including
PLR (Perf Limit Reasons), and IRTL (Package cstate Interrupt Response
Time Limit) MSRs. The configurable TDP info should also be retrieved
from TPMI based Intel Speed Select Technology feature.
Remove the access of these MSRs for DMR. Improve the DMR platform
feature table to make it more readable at the same time.
Fixes: 83075bd59de2 ("tools/power turbostat: Add initial support for DMR") Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Michael Hebenstreit [Fri, 8 Aug 2025 19:57:53 +0000 (15:57 -0400)]
tools/power turbostat: add format "average" for external attributes
External atributes with format "raw" are not printed in summary lines
for nodes/packages (or with option -S). The new format "average"
behaves like "raw" but also adds the summary data
Signed-off-by: Michael Hebenstreit <michael.hebenstreit@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Sat, 12 Jul 2025 20:16:56 +0000 (16:16 -0400)]
tools/power turbostat: Support more than 64 built-in-counters
We have out-grown the ability to use a 64-bit memory location
to inventory every possible built-in counter.
Leverage the the CPU_SET(3) macros to break this barrier.
Also, break the Joules & Watts counters into two,
since we can no longer 'or' them together...
Linus Torvalds [Sat, 9 Aug 2025 15:12:23 +0000 (18:12 +0300)]
Merge tag 'tty-6.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull TTY fix from Greg KH:
"Here is a single revert of one of the previous patches that went in
the last tty/serial merge that is breaking userspace on some platforms
(specifically powerpc, probably a few others.)
It accidentially changed the ioctl values of some tty ioctls, which
breaks xorg.
The revert has been in linux-next all this week with no reported
issues"
* tag 'tty-6.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "tty: vt: use _IO() to define ioctl numbers"
Linus Torvalds [Sat, 9 Aug 2025 05:47:28 +0000 (08:47 +0300)]
Merge tag 'block-6.17-20250808' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- MD pull request via Yu:
- mddev null-ptr-dereference fix, by Erkun
- md-cluster fail to remove the faulty disk regression fix, by
Heming
- minor cleanup, by Li Nan and Jinchao
- mdadm lifetime regression fix reported by syzkaller, by Yu Kuai
- MD pull request via Christoph
- add support for getting the FDP featuee in fabrics passthru path
(Nitesh Shetty)
- add capability to connect to an administrative controller
(Kamaljit Singh)
- fix a leak on sgl setup error (Keith Busch)
- initialize discovery subsys after debugfs is initialized
(Mohamed Khalfella)
- fix various comment typos (Bjorn Helgaas)
- remove unneeded semicolons (Jiapeng Chong)
- nvmet debugfs ordering issue fix
- Fix UAF in the tag_set in zloop
- Ensure sbitmap shallow depth covers entire set
- Reduce lock roundtrips in io context lookup
- Move scheduler tags alloc/free out of elevator and freeze lock, to
fix some lockdep found issues
- Improve robustness of queue limits checking
- Fix a regression with IO priorities, if no io context exists
* tag 'block-6.17-20250808' of git://git.kernel.dk/linux: (26 commits)
lib/sbitmap: make sbitmap_get_shallow() internal
lib/sbitmap: convert shallow_depth from one word to the whole sbitmap
nvmet: exit debugfs after discovery subsystem exits
block, bfq: Reorder struct bfq_iocq_bfqq_data
md: make rdev_addable usable for rcu mode
md/raid1: remove struct pool_info and related code
md/raid1: change r1conf->r1bio_pool to a pointer type
block: ensure discard_granularity is zero when discard is not supported
zloop: fix KASAN use-after-free of tag set
block: Fix default IO priority if there is no IO context
nvme: fix various comment typos
nvme-auth: remove unneeded semicolon
nvme-pci: fix leak on sgl setup error
nvmet: initialize discovery subsys after debugfs is initialized
nvme: add capability to connect to an administrative controller
nvmet: add support for FDP in fabrics passthru path
md: rename recovery_cp to resync_offset
md/md-cluster: handle REMOVE message earlier
md: fix create on open mddev lifetime regression
block: fix potential deadlock while running nr_hw_queue update
...
Linus Torvalds [Sat, 9 Aug 2025 05:45:08 +0000 (08:45 +0300)]
Merge tag 'io_uring-6.17-20250808' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Allow vectorized payloads for send/send-zc - like sendmsg, but
without the hassle of a msghdr.
- Fix for an integer wrap that should go to stable, spotted by syzbot.
Nothing alarming here, as you need to be root to hit this.
Nevertheless, it should get fixed.
FWIW, kudos to the syzbot crew for having much nicer reproducers now,
and with nicely annotated source code as well. This is particularly
useful as syzbot uses the raw interface rather than liburing,
historically it's been difficult to turn a syzbot reproducer into a
meaningful test case. With the recent changes, not true anymore!
* tag 'io_uring-6.17-20250808' of git://git.kernel.dk/linux:
io_uring/memmap: cast nr_pages to size_t before shifting
io_uring/net: Allow to do vectorized send
Linus Torvalds [Sat, 9 Aug 2025 05:43:24 +0000 (08:43 +0300)]
Merge tag 'spi-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"There's one fix here for an issue with the CS42L43 where we were
allocating a single property for client devices as just that property
rather than a terminated array of properties like we are supposed to.
We also have an update to the MAINTAINERS file for some Renesas
devices"
* tag 'spi-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cs42l43: Property entry should be a null-terminated array
MAINTAINERS: Add entries for the RZ/V2H(P) RSPI
Linus Torvalds [Sat, 9 Aug 2025 05:41:53 +0000 (08:41 +0300)]
Merge tag 'regulator-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"This fixes an issue with the newly added code for handling large
voltage changes on regulators which require that individual voltage
changes cover a limited range, the check for convergence was broken"
* tag 'regulator-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: correct convergence check in regulator_set_voltage()
Linus Torvalds [Sat, 9 Aug 2025 05:40:28 +0000 (08:40 +0300)]
Merge tag 'regmap-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"These patches fix a lockdep issue Russell King reported with nested
regmap-irqs (unusual since regmap is generally for devices on slow
buses so devices don't get nested), plus add a missing mutex free
which I noticed while implementing a fix for that issue"
* tag 'regmap-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: irq: Avoid lockdep warnings with nested regmap-irq chips
regmap: irq: Free the regmap-irq mutex
Linus Torvalds [Sat, 9 Aug 2025 05:37:17 +0000 (08:37 +0300)]
Merge tag 'mailbox-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- aspeed: add driver and bindings for ast2700
- broadcom: add driver and bindings for bcm74110
- mediatek: fix RPM api usage
- qcom: use dev_fwnode
- pcc: support shared buffer
- misc dt-bindings cleanup
* tag 'mailbox-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox/pcc: support mailbox management of the shared buffer
mailbox: bcm74110: Fix spelling mistake
mailbox: bcm74110: remove unneeded semicolon
mailbox: aspeed: add mailbox driver for AST27XX series SoC
dt-bindings: mailbox: Add ASPEED AST2700 series SoC
dt-bindings: mailbox: Drop consumers example DTS
dt-bindings: mailbox: nvidia,tegra186-hsp: Use generic node name
dt-bindings: mailbox: Correct example indentation
dt-bindings: mailbox: ti,secure-proxy: Add missing reg maxItems
dt-bindings: mailbox: amlogic,meson-gxbb-mhu: Add missing interrupts maxItems
dt-bindings: mailbox: qcom-ipcc: document the Milos Inter-Processor Communication Controller
mailbox: Add support for bcm74110
dt-bindings: mailbox: Add support for bcm74110
mailbox: Use dev_fwnode()
mailbox: mtk-cmdq: Switch to pm_runtime_put_autosuspend()
Linus Torvalds [Sat, 9 Aug 2025 05:15:43 +0000 (08:15 +0300)]
Merge tag 'gpio-updates-for-v6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"As discussed: there's a small commit that removes the legacy GPIO line
value setter callbacks as they're no longer used and a big, treewide
commit that renames the new ones to the old names across all GPIO
drivers at once.
While at it: there are also two fixes that I picked up over the course
of the merge window:
- remove unused, legacy GPIO line value setters from struct gpio_chip
- rename the new set callbacks back to the original names treewide
- fix interrupt handling in gpio-mlxbf2
- revert a buggy immutable irqchip conversion"
* tag 'gpio-updates-for-v6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
treewide: rename GPIO set callbacks back to their original names
gpio: remove legacy GPIO line value setter callbacks
gpio: mlxbf2: use platform_get_irq_optional()
Revert "gpio: pxa: Make irq_chip immutable"
Linus Torvalds [Sat, 9 Aug 2025 05:12:41 +0000 (08:12 +0300)]
Merge tag 'sound-fix-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
- Support for ASoC AMD ACP 7.2 with new IDs
- ASoC Intel AVS and SOF fixes
- Yet more kconfig adjustments for HD-audio codecs
- TAS2781 codec fixes
- Fixes for longstanding (rather minor) bugs in Intel LPE audio and
USB-audio drivers
* tag 'sound-fix-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/cirrus: Restrict prompt only for CONFIG_EXPERT
ALSA: hda/hdmi: Restrict prompt only for CONFIG_EXPERT
ALSA: hda/realtek: Restrict prompt only for CONFIG_EXPERT
ALSA: hda/ca0132: Fix missing error handling in ca0132_alt_select_out()
ASoC: SOF: Intel: hda-sdw-bpt: fix SND_SOF_SOF_HDA_SDW_BPT dependencies
ALSA: hda/tas2781: Support L"SmartAmpCalibrationData" to save calibrated data
ALSA: intel_hdmi: Fix off-by-one error in __hdmi_lpe_audio_probe()
ALSA: hda/realtek: add LG gram 16Z90R-A to alc269 fixup table
ALSA: usb-audio: Don't use printk_ratelimit for debug prints
ASoC: Intel: sof_sdw: Add quirk for Alienware Area 51 (2025) 0CCC SKU
ASoC: tas2781: Fix the wrong step for TLV on tas2781
ASoC: amd: acp: Add SoundWire SOF machine driver support for acp7.2 platform
ASoC: amd: acp: Add SoundWire legacy machine driver support for acp7.2 platform
ASoC: amd: ps: Add SoundWire pci and dma driver support for acp7.2 platform
ASoC: SOF: amd: Add sof audio support for acp7.2 platform
ASoC: Intel: avs: Fix uninitialized pointer error in probe()
ASoC: wm8962: Clear master mode when enter runtime suspend
ASoC: SOF: amd: acp-loader: Use GFP_KERNEL for DMA allocations in resume context
Linus Torvalds [Sat, 9 Aug 2025 04:58:55 +0000 (07:58 +0300)]
Merge tag 'soc-fixes-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"These are a few patches to fix up bits that went missing during the
merge window: The tegra and s3c patches address trivial regressions
from conflicts, the bcm7445 makes the dt conform to the binding that
was made stricter"
* tag 'soc-fixes-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: tegra: Remove numa-node-id properties
ARM: s3c/gpio: complete the conversion to new GPIO value setters
ARM: dts: broadcom: Fix bcm7445 memory controller compatible
Linus Torvalds [Sat, 9 Aug 2025 04:35:03 +0000 (07:35 +0300)]
Merge tag 'xtensa-20250808' of https://github.com/jcmvbkbc/linux-xtensa
Pull xtensa update from Max Filippov:
- replace __ASSEMBLY__ with __ASSEMBLER__ in arch headers
* tag 'xtensa-20250808' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-uapi headers
xtensa: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headers
Linus Torvalds [Sat, 9 Aug 2025 04:26:19 +0000 (07:26 +0300)]
Merge tag 'v6.17-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"Fix a regression that broke hmac(sha3-224-s390)"
* tag 'v6.17-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: hash - Increase HASH_MAX_DESCSIZE for hmac(sha3-224-s390)
Linus Torvalds [Sat, 9 Aug 2025 04:20:44 +0000 (07:20 +0300)]
Merge tag 'nfs-for-6.17-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable fixes:
- don't inherit NFS filesystem capabilities when crossing from one
filesystem to another
Bugfixes:
- NFS wakeup of __nfs_lookup_revalidate() needs memory barriers
- NFS improve bounds checking in nfs_fh_to_dentry()
- NFS Fix allocation errors when writing to a NFS file backed
loopback device
- NFSv4: More listxattr fixes
- SUNRPC: fix client handling of TLS alerts
- pNFS block/scsi layout fix for an uninitialised pointer
dereference
- pNFS block/scsi layout fixes for the extent encoding, stripe
mapping, and disk offset overflows
- pNFS layoutcommit work around for RPC size limitations
- pNFS/flexfiles avoid looping when handling fatal errors after
layoutget
- localio: fix various race conditions
Features and cleanups:
- Add NFSv4 support for retrieving the btime
- NFS: Allow folio migration for the case of mode == MIGRATE_SYNC
- NFS: Support using a kernel keyring to store TLS certificates
- NFSv4: Speed up delegation lookup using a hash table
- Assorted cleanups to remove unused variables and struct fields
- Assorted new tracepoints to improve debugging"
* tag 'nfs-for-6.17-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (44 commits)
NFS/localio: nfs_uuid_put() fix the wake up after unlinking the file
NFS/localio: nfs_uuid_put() fix races with nfs_open/close_local_fh()
NFS/localio: nfs_close_local_fh() fix check for file closed
NFSv4: Remove duplicate lookups, capability probes and fsinfo calls
NFS: Fix the setting of capabilities when automounting a new filesystem
sunrpc: fix client side handling of tls alerts
nfs/localio: use read_seqbegin() rather than read_seqbegin_or_lock()
NFS: Fixup allocation flags for nfsiod's __GFP_NORETRY
NFSv4.2: another fix for listxattr
NFS: Fix filehandle bounds checking in nfs_fh_to_dentry()
SUNRPC: Silence warnings about parameters not being described
NFS: Clean up pnfs_put_layout_hdr()/pnfs_destroy_layout_final()
NFS: Fix wakeup of __nfs_lookup_revalidate() in unblock_revalidate()
NFS: use a hash table for delegation lookup
NFS: track active delegations per-server
NFS: move the delegation_watermark module parameter
NFS: cleanup nfs_inode_reclaim_delegation
NFS: cleanup error handling in nfs4_server_common_setup
pNFS/flexfiles: don't attempt pnfs on fatal DS errors
NFS: drop __exit from nfs_exit_keyring
...
Linus Torvalds [Sat, 9 Aug 2025 04:12:43 +0000 (07:12 +0300)]
Merge tag 'v6.17rc-part2-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
"Non-smbdirect:
- Fix null ptr deref caused by delay in global spinlock
initialization
- Two fixes for native symlink creation with SMB3.1.1 POSIX
Extensions
- Fix for socket special file creation with SMB3.1.1 POSIX Exensions
- Reduce lock contention by splitting out mid_counter_lock
- move SMB1 transport code to separate file to reduce module size
when support for legacy servers is disabled
- Two cleanup patches: rename mid_lock to make it clearer what it
protects and one to convert mid flags to bool to make clearer
Smbdirect/RDMA restructuring and fixes:
- Fix for error handling in send done
- Remove unneeded empty packet queue
- Fix put_receive_buffer error path
- Two fixes to recv_done error paths
- Remove unused variable
- Improve response and recvmsg type handling
- Fix handling of incoming message type
- Two cleanup fixes for better handling smbdirect recv io
- Two cleanup fixes for socket spinlock
- Two patches that add socket reassembly struct
- Remove unused connection_status enum
- Use flag in common header for SMBDIRECT_RECV_IO_MAX_SGE
- Two cleanup patches to introduce and use smbdirect send io
- Two cleanup patches to introduce and use smbdirect send_io struct
- Fix to return error if rdma connect takes longer than 5 seconds
- Error logging improvements
- Fix redundand call to init_waitqueue_head
- Remove unneeded wait queue"
* tag 'v6.17rc-part2-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: (33 commits)
smb: client: only use a single wait_queue to monitor smbdirect connection status
smb: client: don't call init_waitqueue_head(&info->conn_wait) twice in _smbd_get_connection
smb: client: improve logging in smbd_conn_upcall()
smb: client: return an error if rdma_connect does not return within 5 seconds
smb: client: make use of smbdirect_socket.{send,recv}_io.mem.{cache,pool}
smb: smbdirect: add smbdirect_socket.{send,recv}_io.mem.{cache,pool}
smb: client: make use of struct smbdirect_send_io
smb: smbdirect: introduce struct smbdirect_send_io
smb: client: make use of SMBDIRECT_RECV_IO_MAX_SGE
smb: smbdirect: add SMBDIRECT_RECV_IO_MAX_SGE
smb: client: remove unused enum smbd_connection_status
smb: client: make use of smbdirect_socket.recv_io.reassembly.*
smb: smbdirect: introduce smbdirect_socket.recv_io.reassembly.*
smb: client: make use of smb: smbdirect_socket.recv_io.free.{list,lock}
smb: smbdirect: introduce smbdirect_socket.recv_io.free.{list,lock}
smb: client: make use of struct smbdirect_recv_io
smb: smbdirect: introduce struct smbdirect_recv_io
smb: client: make use of smbdirect_socket->recv_io.expected
smb: smbdirect: introduce smbdirect_socket.recv_io.expected
smb: client: remove unused smbd_connection->fragment_reassembly_remaining
...
Linus Torvalds [Sat, 9 Aug 2025 03:52:37 +0000 (06:52 +0300)]
Merge tag 'v6.17rc-part2-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Fix limiting repeated connections from same IP
- Fix for extracting shortname when name begins with a dot
- Four smbdirect fixes:
- three fixes to the receive path: potential unmap bug, potential
resource leaks and stale connections, and also potential use
after free race
- cleanup to remove unneeded queue
* tag 'v6.17rc-part2-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
smb: server: Fix extension string in ksmbd_extract_shortname()
ksmbd: limit repeated connections from clients with the same IP
smb: server: let recv_done() avoid touching data_transfer after cleanup/move
smb: server: let recv_done() consistently call put_recvmsg/smb_direct_disconnect_rdma_connection
smb: server: make sure we call ib_dma_unmap_single() only if we called ib_dma_map_single already
smb: server: remove separate empty_recvmsg_queue
Zhang Rui [Tue, 17 Jun 2025 12:48:59 +0000 (20:48 +0800)]
tools/power turbostat: Fix bogus SysWatt for forked program
Similar to delta_cpu(), delta_platform() is called in turbostat main
loop. This ensures accurate SysWatt readings in periodic monitoring mode
$ sudo turbostat -S -q --show power -i 1
CoreTmp PkgTmp PkgWatt CorWatt GFXWatt RAMWatt PKG_% RAM_% SysWatt
60 61 6.21 1.13 0.16 0.00 0.00 0.00 13.07
58 61 6.00 1.07 0.18 0.00 0.00 0.00 12.75
58 61 5.74 1.05 0.17 0.00 0.00 0.00 12.22
58 60 6.27 1.11 0.24 0.00 0.00 0.00 13.55
However, delta_platform() is missing for forked program and causes bogus
SysWatt reporting,
$ sudo turbostat -S -q --show power sleep 1
1.004736 sec
CoreTmp PkgTmp PkgWatt CorWatt GFXWatt RAMWatt PKG_% RAM_% SysWatt
57 58 6.05 1.02 0.16 0.00 0.00 0.00 0.03
Add missing delta_platform() for forked program.
Fixes: e5f687b89bc2 ("tools/power turbostat: Add RAPL psys as a built-in counter") Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Kernels configured with CONFIG_MULTIUSER=n have no cap_get_proc().
Check for ENOSYS to recognize this case, and continue on to
attempt to access the requested MSRs (such as temperature).
Signed-off-by: Calvin Owens <calvin@wbinvd.org> Signed-off-by: Len Brown <len.brown@intel.com>
Calvin Owens [Fri, 13 Jun 2025 16:54:23 +0000 (09:54 -0700)]
tools/power turbostat: Fix build with musl
turbostat.c: In function 'parse_int_file':
turbostat.c:5567:19: error: 'PATH_MAX' undeclared (first use in this function)
5567 | char path[PATH_MAX];
| ^~~~~~~~
turbostat.c: In function 'probe_graphics':
turbostat.c:6787:19: error: 'PATH_MAX' undeclared (first use in this function)
6787 | char path[PATH_MAX];
| ^~~~~~~~
Signed-off-by: Calvin Owens <calvin@wbinvd.org> Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Jens Axboe [Fri, 8 Aug 2025 12:35:14 +0000 (06:35 -0600)]
io_uring/memmap: cast nr_pages to size_t before shifting
If the allocated size exceeds UINT_MAX, then it's necessary to cast
the mr->nr_pages value to size_t to prevent it from overflowing. In
practice this isn't much of a concern as the required memory size will
have been validated upfront, and accounted to the user. And > 4GB sizes
will be necessary to make the lack of a cast a problem, which greatly
exceeds normal user locked_vm settings that are generally in the kb to
mb range. However, if root is used, then accounting isn't done, and
then it's possible to hit this issue.
Adam Young [Tue, 15 Jul 2025 00:10:07 +0000 (20:10 -0400)]
mailbox/pcc: support mailbox management of the shared buffer
Define a new, optional, callback that allows the driver to
specify how the return data buffer is allocated. If that callback
is set, mailbox/pcc.c is now responsible for reading from and
writing to the PCC shared buffer.
This also allows for proper checks of the Commnand complete flag
between the PCC sender and receiver.
For Type 4 channels, initialize the command complete flag prior
to accepting messages.
Since the mailbox does not know what memory allocation scheme
to use for response messages, the client now has an optional
callback that allows it to allocate the buffer for a response
message.
When an outbound message is written to the buffer, the mailbox
checks for the flag indicating the client wants an tx complete
notification via IRQ. Upon receipt of the interrupt It will
pair it with the outgoing message. The expected use is to
free the kernel memory buffer for the previous outgoing message.
Signed-off-by: Adam Young <admiyo@os.amperecomputing.com> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
- net: drop UFO packets (injected via virtio) in udp_rcv_segment()
- eth: mlx5: correctly set gso_segs when LRO is used, avoid false
positive checksum validation errors
- netpoll: prevent hanging NAPI when netcons gets enabled
- phy: mscc: fix parsing of unicast frames for PTP timestamping
- a number of device tree / OF reference leak fixes"
* tag 'net-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
pptp: fix pptp_xmit() error path
net: ti: icssg-prueth: Fix skb handling for XDP_PASS
net: Update threaded state in napi config in netif_set_threaded
selftests: netdevsim: Xfail nexthop test on slow machines
eth: fbnic: Lock the tx_dropped update
eth: fbnic: Fix tx_dropped reporting
eth: fbnic: remove the debugging trick of super high page bias
net: ftgmac100: fix potential NULL pointer access in ftgmac100_phy_disconnect
dt-bindings: net: Replace bouncing Alexandru Tachici emails
dpll: zl3073x: ZL3073X_I2C and ZL3073X_SPI should depend on NET
net/sched: mqprio: fix stack out-of-bounds write in tc entry parsing
Revert "net: mdio_bus: Use devm for getting reset GPIO"
selftests: net: packetdrill: xfail all problems on slow machines
net/packet: fix a race in packet_set_ring() and packet_notifier()
benet: fix BUG when creating VFs
net: airoha: npu: Add missing MODULE_FIRMWARE macros
net: devmem: fix DMA direction on unmapping
ipa: fix compile-testing with qcom-mdt=m
eth: fbnic: unlink NAPIs from queues on error to open
net: Add locking to protect skb->dev access in ip_output
...
Linus Torvalds [Fri, 8 Aug 2025 03:56:55 +0000 (06:56 +0300)]
Merge tag 's390-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- Support MMIO read/write tracing
- Enable THP swapping and THP migration
- Unmask SLCF bit ("stateless command filtering") introduced with CEX8
cards, so that user space applications like lszcrypt could evaluate
and list this feature
- Fix the value of high_memory variable, so it considers possible
tailing offline memory blocks
- Make vmem_pte_alloc() consistent and always allocate memory of
PAGE_SIZE for page tables. This ensures a page table occupies the
whole page, as the rest of the code assumes
- Fix kernel image end address in the decompressor debug output
- Fix a typo in debug_sprintf_format_fn() comment
* tag 's390-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/debug: Fix typo in debug_sprintf_format_fn() comment
s390/boot: Fix startup debugging log
s390/mm: Allocate page table with PAGE_SIZE granularity
s390/mm: Enable THP_SWAP and THP_MIGRATION
s390: Support CONFIG_TRACE_MMIO_ACCESS
s390/mm: Set high_memory at the end of the identity mapping
s390/ap: Unmask SLCF bit in card and queue ap functions sysfs
Linus Torvalds [Fri, 8 Aug 2025 03:48:14 +0000 (06:48 +0300)]
Merge tag 'drm-next-2025-08-08' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"This is the fixes that built up in the merge window, mostly amdgpu and
xe with one i915 display fix, seems like things are pretty good for
rc1.
i915:
- DP LPFS fixes
xe:
- SRIOV: PF fixes and removal of need of module param
- Fix driver unbind around Devcoredump
- Mark xe driver as BROKEN if kernel page size is not 4kB
* tag 'drm-next-2025-08-08' of https://gitlab.freedesktop.org/drm/kernel: (28 commits)
drm/amdgpu: add missing vram lost check for LEGACY RESET
drm/amdgpu/discovery: fix fw based ip discovery
drm/amdkfd: Destroy KFD debugfs after destroy KFD wq
amdgpu/amdgpu_discovery: increase timeout limit for IFWI init
drm/amdgpu: Update SDMA firmware version check for user queue support
drm/amdgpu: Add NULL check for asic_funcs
drm/amd/display: Revert "drm/amd/display: Fix AMDGPU_MAX_BL_LEVEL value"
drm/amd/display: fix a Null pointer dereference vulnerability
drm/amd/display: Add primary plane to commits for correct VRR handling
drm/amdgpu: update mmhub 3.3 client id mappings
drm/amdgpu: update mmhub 3.0.1 client id mappings
drm/amdgpu: Retain job->vm in amdgpu_job_prepare_job
drm/amd/display: Fix DCE 6.0 and 6.4 PLL programming.
drm/amd/display: Don't overwrite dce60_clk_mgr
drm/amdkfd: Fix checkpoint-restore on multi-xcc
drm/amd: Restore cached manual clock settings during resume
drm/amd: Restore cached power limit during resume
drm/amdgpu: Update external revid for GC v9.5.0
drm/amdgpu: Update supported modes for GC v9.5.0
Mark xe driver as BROKEN if kernel page size is not 4kB
...
Linus Torvalds [Fri, 8 Aug 2025 03:43:20 +0000 (06:43 +0300)]
Merge tag 'fbdev-for-6.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes for 6.17-rc1:
- Revert a patch which broke VGA console
- Fix an out-of-bounds access bug which may happen during console
resizing when a console is mapped to a frame buffer
* tag 'fbdev-for-6.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
Revert "vgacon: Add check for vc_origin address range in vgacon_scroll()"
fbdev: Fix vmalloc out-of-bounds write in fast_imageblit
Linus Torvalds [Fri, 8 Aug 2025 03:36:48 +0000 (06:36 +0300)]
Merge tag 'loongarch-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Complete KSave registers definition
- Support the mem=<size> kernel parameter
- Support BPF dynamic modification & trampoline
- Add MMC/SDIO controller nodes in dts
- Some bug fixes and other small changes
* tag 'loongarch-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: vDSO: Remove -nostdlib complier flag
LoongArch: dts: Add eMMC/SDIO controller support to Loongson-2K2000
LoongArch: dts: Add SDIO controller support to Loongson-2K1000
LoongArch: dts: Add SDIO controller support to Loongson-2K0500
LoongArch: BPF: Set bpf_jit_bypass_spec_v1/v4()
LoongArch: BPF: Fix the tailcall hierarchy
LoongArch: BPF: Fix jump offset calculation in tailcall
LoongArch: BPF: Add struct ops support for trampoline
LoongArch: BPF: Add basic bpf trampoline support
LoongArch: BPF: Add dynamic code modification support
LoongArch: BPF: Rename and refactor validate_code()
LoongArch: Add larch_insn_gen_{beq,bne} helpers
LoongArch: Don't use %pK through printk() in unwinder
LoongArch: Avoid in-place string operation on FDT content
LoongArch: Support mem=<size> kernel parameter
LoongArch: Make relocate_new_kernel_size be a .quad value
LoongArch: Complete KSave registers definition
Thorsten Blum [Wed, 6 Aug 2025 01:03:49 +0000 (03:03 +0200)]
smb: server: Fix extension string in ksmbd_extract_shortname()
In ksmbd_extract_shortname(), strscpy() is incorrectly called with the
length of the source string (excluding the NUL terminator) rather than
the size of the destination buffer. This results in "__" being copied
to 'extension' rather than "___" (two underscores instead of three).
Use the destination buffer size instead to ensure that the string "___"
(three underscores) is copied correctly.
Cc: stable@vger.kernel.org Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Namjae Jeon [Tue, 5 Aug 2025 09:13:13 +0000 (18:13 +0900)]
ksmbd: limit repeated connections from clients with the same IP
Repeated connections from clients with the same IP address may exhaust
the max connections and prevent other normal client connections.
This patch limit repeated connections from clients with the same IP.
Reported-by: tianshuo han <hantianshuo233@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Dave Airlie [Thu, 7 Aug 2025 19:50:02 +0000 (05:50 +1000)]
Merge tag 'drm-xe-next-fixes-2025-08-06' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
- SRIOV: PF fixes and removal of need of module param (Michal)
- Fix driver unbind around Devcoredump (Bala)
- Mark xe driver as BROKEN if kernel page size is not 4kB (Simon)
Stefan Metzmacher [Thu, 7 Aug 2025 16:12:14 +0000 (18:12 +0200)]
smb: client: only use a single wait_queue to monitor smbdirect connection status
There's no need for separate conn_wait and disconn_wait queues.
This will simplify the move to common code, the server code
already a single wait_queue for this.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Stefan Metzmacher [Thu, 7 Aug 2025 16:12:13 +0000 (18:12 +0200)]
smb: client: don't call init_waitqueue_head(&info->conn_wait) twice in _smbd_get_connection
It is already called long before we may hit this cleanup code path.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Stefan Metzmacher [Thu, 7 Aug 2025 16:12:12 +0000 (18:12 +0200)]
smb: client: improve logging in smbd_conn_upcall()
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Stefan Metzmacher [Thu, 7 Aug 2025 16:12:11 +0000 (18:12 +0200)]
smb: client: return an error if rdma_connect does not return within 5 seconds
This matches the timeout for tcp connections.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Fixes: f198186aa9bb ("CIFS: SMBD: Establish SMB Direct connection") Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Nam Cao [Thu, 7 Aug 2025 08:10:51 +0000 (10:10 +0200)]
PCI: vmd: Fix wrong kfree() in vmd_msi_free()
vmd_msi_alloc() allocates struct vmd_irq and stashes it into
irq_data->chip_data associated with the VMD's interrupt domain.
vmd_msi_free() extracts the pointer by calling irq_get_chip_data() and
frees it.
irq_get_chip_data() returns the chip_data associated with the top interrupt
domain. This worked in the past because VMD's interrupt domain was the top
domain.
But d7d8ab87e3e7 ("PCI: vmd: Switch to msi_create_parent_irq_domain()")
changed the interrupt domain hierarchy so VMD's interrupt domain is not the
top domain anymore. irq_get_chip_data() now returns the chip_data at the
MSI devices' interrupt domains. It is therefore broken for vmd_msi_free()
to kfree() this chip_data.
Fix by extracting the chip_data associated with the VMD's interrupt domain.
====================
perf/s390: Regression: Move uid filtering to BPF filters
v4: https://lore.kernel.org/bpf/20250806114227.14617-1-iii@linux.ibm.com/
v4 -> v5: Fix a typo in the commit message (Yonghong).
v3: https://lore.kernel.org/bpf/20250805130346.1225535-1-iii@linux.ibm.com/
v3 -> v4: Rename the new field to dont_enable (Alexei, Eduard).
Switch the Fixes: tag in patch 2 (Alexander, Thomas).
Fix typos in the cover letter (Thomas).
v2: https://lore.kernel.org/bpf/20250728144340.711196-1-tmricht@linux.ibm.com/
v2 -> v3: Use no_ioctl_enable in perf.
This series fixes a regression caused by moving UID filtering to BPF.
The regression affects all events that support auxiliary data, most
notably, "cycles" events on s390, but also PT events on Intel. The
symptom is missing events when UID filtering is enabled.
Patch 1 introduces a new option for the
bpf_program__attach_perf_event_opts() function.
Patch 2 makes use of it in perf, and also contains a lot of technical
details of why exactly the problem is occurring.
Thanks to Thomas Richter for the investigation and the initial version
of this fix, and to Jiri Olsa for suggestions.
This allocates the ring buffer for the event 'cycles'. With mmap()
the kernel creates the ring buffer:
perf_mmap(): kernel function to create the event's ring
| buffer to save the sampled data.
|
+-> ring_buffer_attach(): Allocates memory for ring buffer.
| The PMU has auxiliary data setup function. The
| has_aux(event) condition is true and the PMU's
| stop() is called to stop sampling. It is not
| restarted:
|
| if (has_aux(event))
| perf_event_stop(event, 0);
|
+-> cpumsf_pmu_stop():
Hardware sampling is stopped. No samples are generated and saved
anymore.
3. After the event 'cycles' has been mapped, the event is enabled a
second time in:
return immediately because event::state is already set to
PERF_EVENT_STATE_ACTIVE.
This happens on s390, because the event 'cycles' offers the possibility
to save auxilary data. The PMU callbacks setup_aux() and free_aux() are
defined. Without both callback functions, cpumsf_pmu_stop() is not
invoked and sampling continues.
To remedy this, remove the first invocation of
ioctl(..., PERF_EVENT_IOC_ENABLE, ...).
in step (1.) Create the event in step (1.) and enable it in step (3.)
after the ring buffer has been mapped.
Output after:
# ./perf record -aB --synth=no -u 0 -- ./perf test -w thloop 2
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.876 MB perf.data ]
# ./perf report --stats | grep SAMPLE
SAMPLE events: 16200 (99.5%)
SAMPLE events: 16200
#
The software event succeeded both before and after the patch:
# ./perf record -e cpu-clock -aB --synth=no -u 0 -- \
./perf test -w thloop 2
[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 2.870 MB perf.data ]
# ./perf report --stats | grep SAMPLE
SAMPLE events: 53506 (99.8%)
SAMPLE events: 53506
#
Fixes: b4c658d4d63d61 ("perf target: Remove uid from target") Suggested-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Co-developed-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/r/20250806162417.19666-3-iii@linux.ibm.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich [Wed, 6 Aug 2025 16:22:41 +0000 (18:22 +0200)]
libbpf: Add the ability to suppress perf event enablement
Automatically enabling a perf event after attaching a BPF prog to it is
not always desirable.
Add a new "dont_enable" field to struct bpf_perf_event_opts. While
introducing "enable" instead would be nicer in that it would avoid
a double negation in the implementation, it would make
DECLARE_LIBBPF_OPTS() less efficient.
Acked-by: Eduard Zingerman <eddyz87@gmail.com> Suggested-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Thomas Richter <tmricht@linux.ibm.com> Co-developed-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/r/20250806162417.19666-2-iii@linux.ibm.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Yu Kuai [Thu, 7 Aug 2025 03:24:13 +0000 (11:24 +0800)]
lib/sbitmap: make sbitmap_get_shallow() internal
Because it's only used in sbitmap.c
Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20250807032413.1469456-3-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Yu Kuai [Thu, 7 Aug 2025 03:24:12 +0000 (11:24 +0800)]
lib/sbitmap: convert shallow_depth from one word to the whole sbitmap
Currently elevators will record internal 'async_depth' to throttle
asynchronous requests, and they both calculate shallow_dpeth based on
sb->shift, with the respect that sb->shift is the available tags in one
word.
However, sb->shift is not the availbale tags in the last word, see
__map_depth:
For consequence, if the last word is used, more tags can be get than
expected, for example, assume nr_requests=256 and there are four words,
in the worst case if user set nr_requests=32, then the first word is
the last word, and still use bits per word, which is 64, to calculate
async_depth is wrong.
One the ohter hand, due to cgroup qos, bfq can allow only one request
to be allocated, and set shallow_dpeth=1 will still allow the number
of words request to be allocated.
Fix this problems by using shallow_depth to the whole sbitmap instead
of per word, also change kyber, mq-deadline and bfq to follow this,
a new helper __map_depth_with_shallow() is introduced to calculate
available bits in each word.
Mohamed Khalfella [Thu, 7 Aug 2025 05:35:07 +0000 (22:35 -0700)]
nvmet: exit debugfs after discovery subsystem exits
Commit 528589947c180 ("nvmet: initialize discovery subsys after debugfs
is initialized") changed nvmet_init() to initialize nvme discovery after
"nvmet" debugfs directory is initialized. The change broke nvmet_exit()
because discovery subsystem now depends on debugfs. Debugfs should be
destroyed after discovery subsystem. Fix nvmet_exit() to do that.
Reported-by: Yi Zhang <yi.zhang@redhat.com> Closes: https://lore.kernel.org/all/CAHj4cs96AfFQpyDKF_MdfJsnOEo=2V7dQgqjFv+k3t7H-=yGhA@mail.gmail.com/ Fixes: 528589947c180 ("nvmet: initialize discovery subsys after debugfs is initialized") Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Daniel Wagner <dwagner@suse.de> Link: https://lore.kernel.org/r/20250807053507.2794335-1-mkhalfella@purestorage.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
treewide: rename GPIO set callbacks back to their original names
The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Takashi Iwai [Wed, 6 Aug 2025 19:25:39 +0000 (21:25 +0200)]
ALSA: hda/cirrus: Restrict prompt only for CONFIG_EXPERT
The split of Cirrus HD-audio codec driver may confuse users when
migrating from the previous kernel configs and leave the needed
drivers disabled. Although we've already set y as default, it's still
safer to paper over the wrong choices.
This patch marks the prompt of split CS420x and CS421x codec drivers
with CONFIG_EXPERT, so that they are all enabled when the top-level
CONFIG_SND_HDA_CODEC_CIRRUS is set.
For users who really care about the minimalistic configuration, they
can turn each driver on/off individually after setting
CONFIG_EXPERT=y.
This patch adds the missing help text to the top-level
CONFIG_SND_HDA_CIRRUS_CODEC together with the explanation of
individual choices, and corrects the help texts that don't fit well
nowadays, too.
Takashi Iwai [Wed, 6 Aug 2025 19:25:38 +0000 (21:25 +0200)]
ALSA: hda/hdmi: Restrict prompt only for CONFIG_EXPERT
The split of HDMI codec driver may confuse users when migrating from
the previous kernel configs and leave some drivers disabled
unexpectedly. Although we've already set y to all HDMI codec drivers
as default, it's still safer to paper over the wrong choices.
This patch marks the prompt of each HDMI codec driver with
CONFIG_EXPERT, so that they are all enabled when the top-level
CONFIG_SND_HDA_CODEC_HDMI is set.
For users who really care about the minimalistic configuration, they
can turn each driver on/off individually after setting
CONFIG_EXPERT=y.
The patch also adds the missing help text to the top-level
CONFIG_SND_HDA_CODEC_HDMI together with the explanation of individual
choices, too.
Takashi Iwai [Wed, 6 Aug 2025 19:25:37 +0000 (21:25 +0200)]
ALSA: hda/realtek: Restrict prompt only for CONFIG_EXPERT
The split of Realtek HD-audio codec driver may cause confusions
especially when migrating from the previous kernel configurations
because it's hard to know which driver to be enabled.
Although we've already set default=y for those codec drivers, it may
still make people changing the stuff unnecessarily without knowing its
side effect.
This patch is for avoiding such pitfalls by marking the prompt of each
Realtek codec driver with CONFIG_EXPERT. For "normal" users (that is,
unless CONFIG_EXPERT is set), all Realtek HD-audio codecs are enabled
together with CONFIG_SND_HDA_CODEC_REALTEK; this is the very same
situation like the previous kernels, after all.
For users who really care about the minimalistic configuration, they
can turn each driver on/off individually after setting
CONFIG_EXPERT=y.
The patch also adds the missing help text to the top-level
CONFIG_SND_HDA_CODEC_REALTEK together with the explanation of
individual choices, too.
Linus Torvalds [Thu, 7 Aug 2025 04:40:01 +0000 (07:40 +0300)]
Merge tag 'input-for-v6.17-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- updates to several drivers consuming GPIO APIs to use setters
returning error codes
- an infrastructure allowing to define "overlays" for touchscreens
carving out regions implementing buttons and other elements from a
bigger sensors and a corresponding update to st1232 driver
- an update to AT/PS2 keyboard driver to map F13-F24 by default
- Samsung keypad driver got a facelift
- evdev input handler will now bind to all devices using EV_SYN event
instead of abusing id->driver_info
- two new sub-drivers implementing 1A (capacitive buttons) and 21
(forcepad button) functions in Synaptics RMI driver
- support for polling mode in Goodix touchscreen driver
- support for support for FocalTech FT8716 in edt-ft5x06 driver
- support for MT6359 in mtk-pmic-keys driver
- removal of pcf50633-input driver since platform it was used on is
gone
- new definitions for game controller "grip" buttons (BTN_GRIP*) and
corresponding changes to xpad and hid-steam controller drivers
- a new definition for "performance" key
* tag 'input-for-v6.17-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (38 commits)
HID: hid-steam: Use new BTN_GRIP* buttons
Input: add keycode for performance mode key
Input: max77693 - convert to atomic pwm operation
Input: st1232 - add touch-overlay handling
dt-bindings: input: touchscreen: st1232: add touch-overlay example
Input: touch-overlay - add touchscreen overlay handling
dt-bindings: touchscreen: add touch-overlay property
Input: atkbd - correctly map F13 - F24
Input: xpad - use new BTN_GRIP* buttons
Input: Add and document BTN_GRIP*
Input: xpad - change buttons the D-Pad gets mapped as to BTN_DPAD_*
Documentation: Fix capitalization of XBox -> Xbox
Input: synaptics-rmi4 - add support for F1A
dt-bindings: input: syna,rmi4: Document F1A function
Input: synaptics-rmi4 - add support for Forcepads (F21)
Input: mtk-pmic-keys - add support for MT6359 PMIC keys
Input: remove special handling of id->driver_info when matching
Input: evdev - switch matching to EV_SYN
Input: samsung-keypad - use BIT() and GENMASK() where appropriate
Input: samsung-keypad - use per-chip parameters
...
Linus Torvalds [Thu, 7 Aug 2025 04:38:25 +0000 (07:38 +0300)]
Merge tag 'for-linus-6.17-1' of https://github.com/cminyard/linux-ipmi
Pull ipmi updates from Corey Minyard:
"Some small fixes for the IPMI driver
Nothing huge, some rate limiting on logs, a strncpy fix where the
source and destination could be the same, and removal of some unused
cruft"
* tag 'for-linus-6.17-1' of https://github.com/cminyard/linux-ipmi:
ipmi: Use dev_warn_ratelimited() for incorrect message warnings
char: ipmi: remove redundant variable 'type' and check
ipmi: Fix strcpy source and destination the same
Linus Torvalds [Thu, 7 Aug 2025 04:36:23 +0000 (07:36 +0300)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fix from Jason Gunthorpe:
"Single fix to correct the iov_iter construction in soft iwarp. This
avoids blktest crashes with recent changes to the allocators"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/siw: Fix the sendmsg byte count in siw_tcp_sendpages
Linus Torvalds [Thu, 7 Aug 2025 04:32:50 +0000 (07:32 +0300)]
Merge tag 'vfio-v6.17-rc1-v2' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Fix imbalance where the no-iommu/cdev device path skips too much on
open, failing to increment a reference, but still decrements the
reference on close. Add bounds checking to prevent such underflows
(Jacob Pan)
- Fill missing detach_ioas op for pds_vfio_pci, fixing probe failure
when used with IOMMUFD (Brett Creeley)
- Split SR-IOV VFs to separate dev_set, avoiding unnecessary
serialization between VFs that appear on the same bus (Alex
Williamson)
- Fix a theoretical integer overflow is the mlx5-vfio-pci variant
driver (Artem Sadovnikov)
- Implement missing VF token checking support via vfio cdev/IOMMUFD
interface (Jason Gunthorpe)
- Add a cond_resched() call to avoid holding the CPU too long during
DMA mapping operations (Keith Busch)
* tag 'vfio-v6.17-rc1-v2' of https://github.com/awilliam/linux-vfio:
vfio/type1: conditional rescheduling while pinning
vfio/qat: add support for intel QAT 6xxx virtual functions
vfio/qat: Remove myself from VFIO QAT PCI driver maintainers
vfio/pci: Do vf_token checks for VFIO_DEVICE_BIND_IOMMUFD
vfio/mlx5: fix possible overflow in tracking max message size
vfio/pci: Separate SR-IOV VF dev_set
vfio/pds: Fix missing detach_ioas op
vfio: Prevent open_count decrement to negative
vfio: Fix unbalanced vfio_df_close call in no-iommu mode
Alex Deucher [Wed, 30 Jul 2025 15:16:05 +0000 (11:16 -0400)]
drm/amdgpu/discovery: fix fw based ip discovery
We only need the fw based discovery table for sysfs. No
need to parse it. Additionally parsing some of the board
specific tables may result in incorrect data on some boards.
just load the binary and don't parse it on those boards.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4441 Fixes: 80a0e8282933 ("drm/amdgpu/discovery: optionally use fw based ip discovery") Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 62eedd150fa11aefc2d377fc746633fdb1baeb55) Cc: stable@vger.kernel.org
Amber Lin [Fri, 1 Aug 2025 00:45:00 +0000 (20:45 -0400)]
drm/amdkfd: Destroy KFD debugfs after destroy KFD wq
Since KFD proc content was moved to kernel debugfs, we can't destroy KFD
debugfs before kfd_process_destroy_wq. Move kfd_process_destroy_wq prior
to kfd_debugfs_fini to fix a kernel NULL pointer problem. It happens
when /sys/kernel/debug/kfd was already destroyed in kfd_debugfs_fini but
kfd_process_destroy_wq calls kfd_debugfs_remove_process. This line
debugfs_remove_recursive(entry->proc_dentry);
tries to remove /sys/kernel/debug/kfd/proc/<pid> while
/sys/kernel/debug/kfd is already gone. It hangs the kernel by kernel
NULL pointer.
Signed-off-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Eric Huang <jinhuieric.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0333052d90683d88531558dcfdbf2525cc37c233) Cc: stable@vger.kernel.org
Waiman Long [Tue, 29 Jul 2025 19:12:32 +0000 (15:12 -0400)]
cpu: Remove obsolete comment from takedown_cpu()
takedown_cpu() has a comment about "all preempt/rcu users must observe
!cpu_active()" which is kind of meaningless in this function. This
comment was originally introduced by commit 6acce3ef8452 ("sched: Remove
get_online_cpus() usage") when _cpu_down() was setting cpu_active_mask
and synchronize_rcu()/synchronize_sched() were added after that.
Later commit 40190a78f85f ("sched/hotplug: Convert cpu_[in]active
notifiers to state machine") added a new CPUHP_AP_ACTIVE hotplug
state to set/clear cpu_active_mask. The following commit b2454caa8977
("sched/hotplug: Move sync_rcu to be with set_cpu_active(false)")
move the synchronize_*() calls to sched_cpu_deactivate() associated
with the new hotplug state, but left the comment behind.
Remove this comment as it is no longer relevant in takedown_cpu().
projects / users / hch / misc.git / log