Andrew Vasquez [Fri, 23 Sep 2011 22:09:46 +0000 (15:09 -0700)]
qla2xxx: Ensure there's enough request-queue space for passthru IOCBs.
The driver should ensure there's a sufficient number of IOCBs
to satisfy the number of scatter-gather entries specified in the
command. Add a 'count' to the control structure, srb_ctx, to use
in qla2x00_alloc_iocbs().
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Chad Dupuis [Fri, 16 Dec 2011 08:49:42 +0000 (00:49 -0800)]
qla2xxx: Update to dynamic logging.
This patch contains minor fixes to our new logging infrastructure:
- Remove extranous messages.
- Re-add 'nexus' and 'hdl' information.
- Adjusted the message ids to fill up the holes.
- Display FCP_CMND priority on update.
- Log only mail box error conditions.
- Do not print "Firmware ready **** FAILED ****" if cable is unplugged.
- Drop noisy 'fw_state...curr time...' message.
- Correct nexus display during abort.
- Add a special case error-logging set to '1'.
- Catagorize I/O exception display handling.
- Correct the bsg msg code printing.
- Dont use dynamic logging after host is removed.
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Joe Perches [Tue, 2 Aug 2011 12:54:22 +0000 (05:54 -0700)]
qla2xxx: Use less stack to emit logging messages.
Return early when logging level too low.
Use normal kernel codeing style for function braces.
Add const where appropriate to logging functions.
Remove now unused #define QL_DBG_BUF_LEN.
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
This function can wait for 5min under certain scenarios. One of them is when
the port is down from switch and bus reset is issued. The bus reset used to
wait for 5 minutes for the loop and upper layer callers used to hang and give
stack trace because of getting stuck for 120 sec. Its legacy code that was used
when the driver used to do queuing of the commands.
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Andrew Vasquez [Wed, 26 Oct 2011 21:20:13 +0000 (14:20 -0700)]
qla2xxx: Correct inadvertent clearing of RISC_INTR status.
During heavy I/O (CPU-affinity mode enabled) and CLI/Agent
interactions, the driver would report periodic mailbox command
timeout statuses. Within the CPU-affinity ISR handler, the
driver should check the 'disable-msix-handshake' flag in deciding
whether or not to clear HCCRX_CLR_RISC_INT. The mode is not
specific to a dedicated queue, instead, applies to the current
'ha' context.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Roland Dreier [Thu, 22 Sep 2011 07:06:05 +0000 (00:06 -0700)]
qla2xxx: Fix crash in qla2x00_abort_all_cmds() on unload
I hit a crash in qla2x00_abort_all_cmds() if the qla2xxx module is
unloaded right after it is loaded. I debugged this down to the abort
handling improperly treating a command of type SRB_ADISC_CMD as if it
had a bsg_job to complete when that command actually uses the iocb_cmd
part of the union. (I guess to hit this one has to unload the module
while the async FC initialization is still in progress)
It seems we should only look for a bsg_job if type is SRB_ELS_CMD_RPT,
SRB_ELS_CMD_HST or SRB_CT_CMD, so switch the test to make that explicit.
Signed-off-by: Roland Dreier <roland@purestorage.com> Acked-by: Chad Dupuis <chad.dupuis@qlogic.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Chad Dupuis [Tue, 16 Aug 2011 18:31:55 +0000 (11:31 -0700)]
qla2xxx: Fix "active_mask" may be used uninitialized warning.
Since active_mask is first assigned in an "else" block, the compiler throws
a warning saying that the active_mask variable may be used uninitialized in
a print statement later. Initialize active_mask to 0 in the declaration to
stop the warning.
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Joe Carnuccio [Tue, 16 Aug 2011 18:31:53 +0000 (11:31 -0700)]
qla2xxx: Return sysfs error codes appropriate to conditions.
Return sysfs error codes that match the conditions encountered.
This prevents sysfs from retrying a request which is conditioned
to fail under the current circumstance.
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Joe Carnuccio [Tue, 16 Aug 2011 18:31:52 +0000 (11:31 -0700)]
qla2xxx: Provide method for updating I2C attached VPD.
Provide bsg interface for updating VPD attached on the I2C serial bus.
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Joe Carnuccio [Tue, 16 Aug 2011 18:31:51 +0000 (11:31 -0700)]
qla2xxx: Correction to sysfs edc interface.
Corrects the return value for the cases where read/write edc fails;
this prevents sysfs from retrying the operation until forever.
Corrects the printk width specifier for the first byte of buf.
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Chad Dupuis [Tue, 16 Aug 2011 18:29:24 +0000 (11:29 -0700)]
qla2xxx: Fix qla24xx revision check while enabling interrupts.
Since we enable interrupts before initializing the firmware, use the chip
revision from PCI config space directly to perform the chip revision check.
Also remove the unnecessary firmware attributes test.
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Arun Easi [Tue, 16 Aug 2011 18:29:23 +0000 (11:29 -0700)]
qla2xxx: T10 DIF - Fix incorrect error reporting.
This fix:
- Disables app tag peeking; correct tag check will be added when the
SCSI API is available.
- Always derive ref_tag from scsi_get_lba()
- Removes incorrect swap of FCP_LUN in FCP_CMND
- Moves app-tag error check before ref-tag check. The reason being,
currently there is no interface in SCSI to retrieve the app-tag
for protection I/Os, so driver puts zero for app-tag in the
firmware interface, but requests not to validate it, but when a
ref-tag error is detected by firmware, it would put
expected/actual tags for all the protection tags (guard/app/ref).
As driver checks for app tag error first, a ref-tag error is
incorrectly flagged as app-tag error.
- Convert HBA specific checks to capability based.
Signed-off-by: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
qla2xxx: Code changes to support new dynamic logging infrastructure.
The code is changed to support the new dynamic logging infrastructure.
Following are the levels added.
Default is 0 - no logging. 0x40000000 - Module Init & Probe.
0x20000000 - Mailbox Cmnds. 0x10000000 - Device Discovery.
0x08000000 - IO tracing. 0x04000000 - DPC Thread.
0x02000000 - Async events. 0x01000000 - Timer routines.
0x00800000 - User space. 0x00400000 - Task Management.
0x00200000 - AER/EEH. 0x00100000 - Multi Q.
0x00080000 - P3P Specific. 0x00040000 - Virtual Port.
0x00020000 - Buffer Dump. 0x00010000 - Misc.
0x7fffffff - For enabling all logs, can be too many logs.
Setting ql2xextended_error_logging module parameter to any of the above
value, will enable the debug for that particular level.
Do LOGICAL OR of the value to enable more than one level.
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
qla2xxx: Basic infrastructure for dynamic logging.
This patch adds the dynamic logging framework to the qla2xxx driver.
The user will be able to change the logging levels on the fly i.e.
without load/unload of the driver. This also enables logging to be
enabled for a particular section of the driver such as initialization,
device discovery etc.
Maxim Uvarov [Tue, 6 Dec 2011 01:20:56 +0000 (17:20 -0800)]
SPEC: ol6 req dracut-kernel-004-242.0.3
Orabug: 13388545
Since firmware moved to uname -r directory dracut has to be able
to load firmware from that directory Signed-off-by: Maxim Uvarov <maxim.uvarov@oracle.com>
Maxim Uvarov [Tue, 6 Dec 2011 01:15:22 +0000 (17:15 -0800)]
SPEC: req udev-095-14.27.0.1.el5_7.1 or more
Orabug: 13348381
Since firmware moved to uname -r directory udev has to be able
to load firmware from that directory Signed-off-by: Maxim Uvarov <maxim.uvarov@oracle.com>
Maxim Uvarov [Sat, 3 Dec 2011 00:03:06 +0000 (16:03 -0800)]
put firmware to kernel version specific location
Orabug: 13254457
By default firmware loaded with priorities from this folders:
/lib/udev/firmware.sh:
FIRMWARE_DIRS="/lib/firmware/updates/$(uname -r) /lib/firmware/updates \
/lib/firmware/$(uname -r) /lib/firmware"
Place firmware to /lib/firmware/$(uname -r) instead of /lib/firmware
to avoid collisions between different firmware versions.
Liu Bo [Tue, 15 Nov 2011 01:48:06 +0000 (20:48 -0500)]
Btrfs: fix tree corruption after multi-thread snapshots and inode_cache flush
The btrfs snapshotting code requires that once a root has been
snapshotted, we don't change it during a commit.
But there are two cases to lead to tree corruptions:
1) multi-thread snapshots can commit serveral snapshots in a transaction,
and this may change the src root when processing the following pending
snapshots, which lead to the former snapshots corruptions;
2) the free inode cache was changing the roots when it root the cache,
which lead to corruptions.
This fixes things by making sure we force COW the block after we create a
snapshot during commiting a transaction, then any changes to the roots
will result in COW, and we get all the fs roots and snapshot roots to be
consistent.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit f1ebcc74d5b2159f44c96b479b6eb8afc7829095)
David Sterba [Fri, 11 Nov 2011 15:14:57 +0000 (10:14 -0500)]
btrfs: rename the option to nospace_cache
Rename no_space_cache option to nospace_cache to be more consistent with
the rest, where the simple prefix 'no' is used to negate an option.
The option has been introduced during the -rc1 cycle and there are has not been
widely used, so it's safe.
Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit 8965593e41dd2d0e2a2f1e6f245336005ea94a2c)
Arne Jansen [Fri, 11 Nov 2011 13:17:10 +0000 (08:17 -0500)]
Btrfs: handle bio_add_page failure gracefully in scrub
Currently scrub fails with ENOMEM when bio_add_page fails. Unfortunately
dm based targets accept only one page per bio, thus making scrub always
fails. This patch just submits the current bio when an error is encountered
and starts a new one.
Signed-off-by: Arne Jansen <sensille@gmx.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit 69f4cb526bd02ae5af35846f9a710c099eec3347)
Miao Xie [Fri, 11 Nov 2011 01:45:05 +0000 (20:45 -0500)]
Btrfs: fix deadlock caused by the race between relocation
We can not do flushable reservation for the relocation when we create snapshot,
because it may make the transaction commit task and the flush task wait for
each other and the deadlock happens.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit 62f30c5462374b991e7e3f42d49ce2265c1b82f1)
Josef Bacik [Fri, 11 Nov 2011 01:45:05 +0000 (20:45 -0500)]
Btrfs: only map pages if we know we need them when reading the space cache
People have been running into a warning when loading space cache because the
page is already mapped when trying to read in a bitmap. The way we read in
entries and pages is kind of convoluted, so fix it so that io_ctl_read_entry
maps the entries if it needs to, and if it hits the end of the page it simply
unmaps the page. That way we can unconditionally unmap the io_ctl before
reading in the bitmap and we should stop hitting these warnings. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit 2f120c05e67ae34c93786b1050c6828904314429)
Miao Xie [Fri, 11 Nov 2011 01:45:05 +0000 (20:45 -0500)]
Btrfs: fix orphan backref nodes
If the root node of a fs/file tree is in the block group that is
being relocated, but the others are not in the other block groups.
when we create a snapshot for this tree between the relocation tree
creation ends and ->create_reloc_tree is set to 0, Btrfs will create
some backref nodes that are the lowest nodes of the backrefs cache.
But we forget to add them into ->leaves list of the backref cache
and deal with them, and at last, they will triggered BUG_ON().
kernel BUG at fs/btrfs/relocation.c:239!
This patch fixes it by adding them into ->leaves list of backref cache.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit 76b9e23d25d5c99f994bee3172de39492e452e93)
Miao Xie [Fri, 11 Nov 2011 01:45:05 +0000 (20:45 -0500)]
Btrfs: fix unreleased path in btrfs_orphan_cleanup()
When we did stress test for the space relocation, the deadlock happened.
By debugging, We found it was caused by the carelessness that we forgot
to unlock the read lock of the extent buffers in btrfs_orphan_cleanup()
before we end the transaction handle, so the transaction commit task waited
the task, which called btrfs_orphan_cleanup(), to unlock the extent buffer,
but that task waited the commit task to end the transaction commit, and
the deadlock happened. Fix it.
Signed-ff-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit 3254c87618354e58fa2a7b375c6664f567480c33)
Miao Xie [Fri, 11 Nov 2011 01:45:04 +0000 (20:45 -0500)]
Btrfs: fix no reserved space for writing out inode cache
I-node cache forgets to reserve the space when writing out it. And when
we do some stress test, such as synctest, it will trigger WARN_ON() in
use_block_rsv().
Chris Mason [Fri, 11 Nov 2011 01:39:08 +0000 (20:39 -0500)]
Btrfs: tweak the delayed inode reservations again
Josef sent along an incremental to the inode reservation
code to make sure we try and fall back to directly updating
the inode item if things go horribly wrong.
This reworks that patch slightly, adding a fallback function
that will always try to update the inode item directly without
going through the delayed_inode code.
Ilya Dryomov [Wed, 9 Nov 2011 12:41:22 +0000 (14:41 +0200)]
Btrfs: rework error handling in btrfs_mount()
Commits 6c41761f and 45ea6095 introduced the possibility of NULL pointer
dereference on error paths, also we would leave all devices busy and
leak fs_info with all sub-structures on error when trying to mount an
already mounted fs to a different directory.
Fix this by doing all allocations before trying to open any of the
devices, adjust error path for mount-already-mounted-fs case.
Ilya Dryomov [Wed, 9 Nov 2011 11:26:37 +0000 (13:26 +0200)]
Btrfs: close devices on all error paths in open_ctree()
Fix a bug introduced by 7e662854 where we would leave devices busy on
certain error paths in open_ctree(). fs_info is guaranteed to be
non-NULL now so it's safe to dereference it on all error paths.
Ilya Dryomov [Tue, 8 Nov 2011 22:08:15 +0000 (00:08 +0200)]
Btrfs: avoid null dereference and leaks when bailing from open_ctree()
Fix bugs introduced by 6c41761f. Firstly, after failing to allocate any
of the tree roots (first 'goto fail' in open_ctree()) we would
dereference a NULL fs_info pointer in free_fs_info(). Secondly, after
failures from init_srcu_struct(), setup_bdi() and new_inode() we would
leak all earlier allocated roots: fs_info fields haven't been
initialized yet so free_fs_info() is rendered useless.
Fix this by initializing fs_info pointer and fs_info fields before any
allocations happen.
Ilya Dryomov [Tue, 8 Nov 2011 14:47:55 +0000 (16:47 +0200)]
Btrfs: fix memory leak in btrfs_parse_early_options()
Don't leak subvol_name string in case multiple subvol= options are
given. "The lastest option is effective" behavior (consistent with
subvolid= and subvolrootid= options) is preserved.
Josef Bacik [Tue, 8 Nov 2011 20:47:34 +0000 (15:47 -0500)]
Btrfs: fix our reservations for updating an inode when completing io
People have been reporting ENOSPC crashes in finish_ordered_io. This is because
we try to steal from the delalloc block rsv to satisfy a reservation to update
the inode. The problem with this is we don't explicitly save space for updating
the inode when doing delalloc. This is kind of a problem and we've gotten away
with this because way back when we just stole from the delalloc reserve without
any questions, and this worked out fine because generally speaking the leaf had
been modified either by the mtime update when we did the original write or
because we just updated the leaf when we inserted the file extent item, only on
rare occasions had the leaf not actually been modified, and that was still ok
because we'd just use a block or two out of the over-reservation that is
delalloc.
Then came the delayed inode stuff. This is amazing, except it wants a full
reservation for updating the inode since it may do it at some point down the
road after we've written the blocks and we have to recow everything again. This
worked out because the delayed inode stuff just stole from the global reserve,
that is until recently when I changed that because it caused other problems.
So here we are, we're doing everything right and being screwed for it. So take
an extra reservation for the inode at delalloc reservation time and carry it
through the life of the delalloc reservation. If we need it we can steal it in
the delayed inode stuff. If we have already stolen it try and do a normal
metadata reservation. If that fails try to steal from the delalloc reservation.
If _that_ fails we'll get a WARN_ON() so I can start thinking of a better way to
solve this and in the meantime we'll steal from the global reserve.
With this patch I ran xfstests 13 in a loop for a couple of hours and didn't see
any problems.
Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit 7fd2ae21a42d178982679b86086661292b4afe4a)
Chris Mason [Tue, 8 Nov 2011 19:49:59 +0000 (14:49 -0500)]
Btrfs: fix oops on NULL trans handle in btrfs_truncate
If we fail to reserve space in the transaction during truncate, we can
error out with a NULL trans handle. The cleanup code needs an extra
check to make sure we aren't trying to use the bad handle.
slyich@gmail.com [Mon, 7 Nov 2011 21:08:01 +0000 (16:08 -0500)]
btrfs: fix double-free 'tree_root' in 'btrfs_mount()'
On error path 'tree_root' is treed in 'free_fs_info()'.
No need to free it explicitely. Noticed by SLUB in debug mode:
Complete reproducer under usermode linux (discovered on real
machine):
bdev=/dev/ubda
btr_root=/btr
/mkfs.btrfs $bdev
mount $bdev $btr_root
mkdir $btr_root/subvols/
cd $btr_root/subvols/
/btrfs su cr foo
/btrfs su cr bar
mount $bdev -osubvol=subvols/foo $btr_root/subvols/bar
umount $btr_root/subvols/bar
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Cc: Arne Jansen <sensille@gmx.net> Cc: Chris Mason <chris.mason@oracle.com> Cc: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit 45ea6095c8f0d6caad5658306416a5d254f1205e)
Chris Mason [Sun, 6 Nov 2011 23:50:56 +0000 (18:50 -0500)]
Btrfs: check for a null fs root when writing to the backup root log
During log replay, can commit the transaction before the fs_root
pointers are setup, so we have to make sure they are not null before
trying to use them.
Chris Mason [Sun, 6 Nov 2011 08:26:19 +0000 (03:26 -0500)]
Btrfs: fix race during transaction joins
While we're allocating ram for a new transaction, we drop our spinlock.
When we get the lock back, we do check to see if a transaction started
while we slept, but we don't check to make sure it isn't blocked
because a commit has already started.
Josef Bacik [Fri, 4 Nov 2011 23:56:02 +0000 (19:56 -0400)]
Btrfs: fix delayed insertion reservation
We all keep getting those stupid warnings from use_block_rsv when running
stress.sh, and it's because the delayed insertion stuff is being stupid. It's
not the delayed insertion stuffs fault, it's all just stupid. When marking an
inode dirty for oh say updating the time on it, we just do a
btrfs_join_transaction, which doesn't reserve any space. This is stupid because
we're going to have to have space reserve to make this change, but we do it
because it's fast because chances are we're going to call it over and over again
and it doesn't matter. Well thanks to the delayed insertion stuff this is
mostly the case, so we do actually need to make this reservation. So if
trans->bytes_reserved is 0 then try to do a normal reservation. If not return
ENOSPC which will make the btrfs_dirty_inode start a proper transaction which
will let it do the whole ENOSPC dance and reserve enough space for the delayed
insertion to steal the reservation from the transaction.
The other stupid thing we do is not reserve space for the inode when writing to
the thing. Usually this is ok since we have to update the time so we'd have
already done all this work before we get to the endio stuff, so it doesn't
matter. But this is stupid because we could write the data after the
transaction commits where we changed the mtime of the inode so we have to cow
all the way down to the inode anyway. This used to be masked by the delalloc
reservation stuff, but because we delay the update it doesn't get masked in this
case. So again the delayed insertion stuff bites us in the ass. So if our
trans->block_rsv is delalloc, just steal the reservation from the delalloc
reserve. Hopefully this won't bite us in the ass, but I've said that before.
With this patch stress.sh no longer spits out those stupid warnings (famous last
words). Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit c06a0e120a4e381a1c291c1fce3c6155c5791cae)
Chris Mason [Fri, 4 Nov 2011 16:29:37 +0000 (12:29 -0400)]
Btrfs: ClearPageError during writepage and clean_tree_block
Failure testing was tripping up over stale PageError bits in
metadata pages. If we have an io error on a block, and later on
end up reusing it, nobody ever clears PageError on those pages.
During commit, we'll find PageError and think we had trouble writing
the block, which will lead to aborts and other problems.
This changes clean_tree_block and the btrfs writepage code to
clear the PageError bit. In both cases we're either completely
done with the page or the page has good stuff and the error bit
is no longer valid.
Josef Bacik [Fri, 4 Nov 2011 02:54:25 +0000 (22:54 -0400)]
Btrfs: be smarter about committing the transaction in reserve_metadata_bytes
Because of the overcommit stuff I had to make it so that we committed the
transaction all the time in reserve_metadata_bytes in case we had overcommitted
because of delayed items. This was because previously we had no way of knowing
how much space was reserved for delayed items. Now that we have the
delayed_block_rsv we can check it to see if committing the transaction would get
us anywhere. This patch breaks out the committing logic into a helper function
that will check to see if committing the transaction would free enough space for
us to get anything done. With this patch xfstests 83 goes from taking 445
seconds to taking 28 seconds on my box. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit 663350ac38c67ca388acea6e876dc6d668c232b0)
Josef Bacik [Fri, 4 Nov 2011 02:54:25 +0000 (22:54 -0400)]
Btrfs: make a delayed_block_rsv for the delayed item insertion
I've been hitting warnings in use_block_rsv when running the delayed insertion
stuff. It's because we will readjust global block rsv based on what is in use,
which means we could end up discarding reservations that are for the delayed
insertion stuff. So instead create a seperate block rsv for the delayed
insertion stuff. This will also make it easier to debug problems with the
delayed insertion reservations since we will know that only the delayed
insertion code touches this block_rsv. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit 6d668dda0caec537fbf28c4d91e6d18181af3cff)
Chris Mason [Thu, 3 Nov 2011 19:17:42 +0000 (15:17 -0400)]
Btrfs: add a log of past tree roots
This takes some of the free space in the btrfs super block
to record information about most of the roots in the last four
commits.
It also adds a -o recovery to use the root history log when
we're not able to read the tree of tree roots, the extent
tree root, the device tree root or the csum root.
David Sterba [Wed, 13 Apr 2011 13:41:04 +0000 (15:41 +0200)]
btrfs: separate superblock items out of fs_info
fs_info has now ~9kb, more than fits into one page. This will cause
mount failure when memory is too fragmented. Top space consumers are
super block structures super_copy and super_for_commit, ~2.8kb each.
Allocate them dynamically. fs_info will be ~3.5kb. (measured on x86_64)
Add a wrapper for freeing fs_info and all of it's dynamically allocated
members.
Josef Bacik [Wed, 2 Nov 2011 13:29:35 +0000 (09:29 -0400)]
Btrfs: use the global reserve when truncating the free space cache inode
We no longer use the orphan block rsv for holding the reservation for truncating
the inode, so instead use the global block rsv and check to make sure it has
enough space for us to truncate the space. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit c8174313a8102e874aaa321e2fc4c7c460a87151)
Josef Bacik [Tue, 1 Nov 2011 18:32:23 +0000 (14:32 -0400)]
Btrfs: release metadata from global reserve if we have to fallback for unlink
I fixed a problem where we weren't reserving space for an orphan item when we
had to fallback to using the global reserve for an unlink, but I introduced
another problem. I was migrating the bytes from the transaction reserve to the
global reserve and then releasing from the global reserve in
btrfs_end_transaction(). The problem with this is that a migrate will jack up
the size for the destination, but leave the size alone for the source, with the
idea that you can do a release normally on the source and it all washes out, and
then you can do a release again on the destination and it works out right. My
way was skipping the release on the trans_block_rsv which still had the jacked
up size from our original reservation. So instead release manually from the
global reserve if this transaction was using it, and then set the
trans->block_rsv back to the trans_block_rsv so that btrfs_end_transaction
cleans everything up properly. With this patch xfstest 83 doesn't emit warnings
about leaking space. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit 5a77d76c243be18d854aa1b14d697525f60e169a)
projects / users / jedix / linux-maple.git / log