Dave Airlie [Thu, 20 Jan 2022 22:31:29 +0000 (08:31 +1000)]
Merge tag 'drm-intel-next-fixes-2022-01-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Latest updates for the EHL display voltage swing table (José Roberto de Souza)
- Additional step is required when programming the ADL-P display TC voltage swing (José Roberto de Souza)
Daniel Vetter [Fri, 14 Jan 2022 14:15:56 +0000 (15:15 +0100)]
Merge tag 'drm-misc-fixes-2022-01-14' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Two DT bindings fixes for meson, a device refcounting fix for sun4i, a
probe fix for vga16fb, a locking fix for the CMA dma-buf heap and a
compilation fix for ttm.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: I made sure I have exactly the same conflict resolution as
Linus in 8d0749b4f83b ("Merge tag 'drm-next-2022-01-07' of
git://anongit.freedesktop.org/drm/drm") to avoid further conflict fun.
From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220114125454.zs46ny52lrxk3ljz@houat
Claudio Suarez [Thu, 2 Dec 2021 09:51:12 +0000 (10:51 +0100)]
drm: fix error found in some cases after the patch d1af5cd86997
The patch d1af5cd86997 ("drm: get rid of DRM_DEBUG_* log
calls in drm core, files drm_a*.c") fails when the drm_device
cannot be found in the parameter plane_state->crtc.
Fix it using plane_state->plane.
Daniel Vetter [Fri, 14 Jan 2022 12:34:39 +0000 (13:34 +0100)]
Merge tag 'drm-intel-next-fixes-2022-01-13' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Hold runtime PM wakelock during PXP unbind (Juston Li)
- Three fixes for the TTM backend fault handling (Matthew Auld)
- Make sure to unmap when purging in the TTM backend (Matthew Auld)
Johannes Berg [Mon, 20 Dec 2021 10:15:22 +0000 (11:15 +0100)]
drm/ttm: fix compilation on ARCH=um
Even if it's probably not really useful, it can get selected
by e.g. randconfig builds, and then failing to compile is an
annoyance. Unfortunately, it's hard to fix in Kconfig, since
DRM_TTM is selected by many things that don't really depend
on any specific architecture, and just depend on PCI (which
is indeed now available in ARCH=um via simulation/emulation).
Fix this in the code instead by just ifdef'ing the relevant
two lines that depend on "real X86".
Javier Martinez Canillas [Mon, 10 Jan 2022 09:56:25 +0000 (10:56 +0100)]
video: vga16fb: Only probe for EGA and VGA 16 color graphic cards
The vga16fb framebuffer driver only supports Enhanced Graphics Adapter
(EGA) and Video Graphics Array (VGA) 16 color graphic cards.
But it doesn't check if the adapter is one of those or if a VGA16 mode
is used. This means that the driver will be probed even if a VESA BIOS
Extensions (VBE) or Graphics Output Protocol (GOP) interface is used.
This issue has been present for a long time but it was only exposed by
commit d391c5827107 ("drivers/firmware: move x86 Generic System
Framebuffers support") since the platform device registration to match
the {vesa,efi}fb drivers is done later as a consequence of that change.
All non-x86 architectures though treat orig_video_isVGA as a boolean so
only do the supported video mode check for x86 and not for other arches.
Kent Russell [Tue, 11 Jan 2022 17:28:27 +0000 (12:28 -0500)]
drm/amdkfd: Fix ASIC name typos
Three misspelled ASICs in comments here, so fix the spelling
Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Wed, 8 Dec 2021 03:03:52 +0000 (22:03 -0500)]
drm/amdkfd: Fix DQM asserts on Hawaii
start_nocpsch would never set dqm->sched_running on Hawaii due to an
early return statement. This would trigger asserts in other functions
and end up in inconsistent states.
Bug: https://github.com/RadeonOpenCompute/ROCm/issues/1624 Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Tue, 4 Jan 2022 15:45:41 +0000 (10:45 -0500)]
drm/amdgpu: Use correct VIEWPORT_DIMENSION for DCN2
For some reason this file isn't using the appropriate register
headers for DCN headers, which means that on DCN2 we're getting
the VIEWPORT_DIMENSION offset wrong.
This means that we're not correctly carving out the framebuffer
memory correctly for a framebuffer allocated by EFI and
therefore see corruption when loading amdgpu before the display
driver takes over control of the framebuffer scanout.
Fix this by checking the DCE_HWIP and picking the correct offset
accordingly.
Long-term we should expose this info from DC as GMC shouldn't
need to know about DCN registers.
Cc: stable@vger.kernel.org Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tao Zhou [Mon, 10 Jan 2022 07:12:38 +0000 (15:12 +0800)]
drm/amd/pm: only send GmiPwrDnControl msg on master die (v3)
PMFW only returns 0 on master die and sends NACK back on other dies for
the message.
v2: only send GmiPwrDnControl msg on master die instead of all
dies.
v3: remove the pointer check for get_socket_id and get_die_id as they
should be present on Aldebaran.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Wed, 8 Dec 2021 22:51:43 +0000 (17:51 -0500)]
drm/amdkfd: Use prange->update_list head for remove_list
The remove_list head was only used for keeping track of existing ranges
that are to be removed from the svms->list. The update_list was used for
new or existing ranges that need updated attributes. These two cases are
mutually exclusive (i.e. the same range will never be on both lists).
Therefore we can use the update_list head to track the remove_list and
save another 16 bytes in the svm_range struct.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Wed, 8 Dec 2021 22:33:48 +0000 (17:33 -0500)]
drm/amdkfd: Use prange->list head for insert_list
There are seven list_heads in struct svm_range: list, update_list,
remove_list, insert_list, svm_bo_list, deferred_list, child_list. This
patch and the next one remove two of them that are redundant.
The insert_list head was only used for new ranges that are not on the
svms->list yet. So we can use that list head for keeping track of
new ranges before they get added, and use list_move_tail to move them
to the svms->list when ready.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lukas Bulwahn [Thu, 16 Dec 2021 09:45:03 +0000 (10:45 +0100)]
drm/amdkfd: make SPDX License expression more sound
Commit b5f57384805a ("drm/amdkfd: Add sysfs bitfields and enums to uAPI")
adds include/uapi/linux/kfd_sysfs.h with the "GPL-2.0 OR MIT WITH
Linux-syscall-note" SPDX-License expression.
The command ./scripts/spdxcheck.py warns:
include/uapi/linux/kfd_sysfs.h: 1:48 Exception not valid for license MIT: Linux-syscall-note
For a uapi header, the file under GPLv2 License must be combined with the
Linux-syscall-note, but combining the MIT License with the
Linux-syscall-note makes no sense, as the note provides an exception for
GPL-licensed code, not for permissively licensed code.
So, reorganize the SPDX expression to only combine the note with the GPL
License condition. This makes spdxcheck happy again.
Fixes: b5f57384805a ("drm/amdkfd: Add sysfs bitfields and enums to uAPI") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: kstewart@linuxfoundation.org Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jiasheng Jiang [Wed, 5 Jan 2022 09:09:43 +0000 (17:09 +0800)]
drm/amdkfd: Check for null pointer after calling kmemdup
As the possible failure of the allocation, kmemdup() may return NULL
pointer.
Therefore, it should be better to check the 'props2' in order to prevent
the dereference of NULL pointer.
Fixes: 3a87177eb141 ("drm/amdkfd: Add topology support for dGPUs") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Fri, 7 Jan 2022 21:40:10 +0000 (15:40 -0600)]
drm/amd/display: reset dcn31 SMU mailbox on failures
Otherwise future commands may fail as well leading to downstream
problems that look like they stemmed from a timeout the first time
but really didn't.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Greg Kroah-Hartman [Thu, 6 Jan 2022 09:57:13 +0000 (10:57 +0100)]
drm/amdkfd: use default_groups in kobj_type
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the amdkfd sysfs code to use default_groups field which has
been the preferred way since aa30f47cf666 ("kobject: Add support for
default attribute groups to kobj_type") so that we can soon get rid of
the obsolete default_attrs field.
Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Greg Kroah-Hartman [Thu, 6 Jan 2022 09:56:10 +0000 (10:56 +0100)]
drm/amdgpu: use default_groups in kobj_type
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the amdgpu sysfs code to use default_groups field which has
been the preferred way since aa30f47cf666 ("kobject: Add support for
default attribute groups to kobj_type") so that we can soon get rid of
the obsolete default_attrs field.
Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Cc: John Clements <john.clements@amd.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Jonathan Kim <jonathan.kim@amd.com> Cc: Kevin Wang <kevin1.wang@amd.com> Cc: shaoyunl <shaoyun.liu@amd.com> Cc: Tao Zhou <tao.zhou1@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Fri, 7 Jan 2022 11:57:41 +0000 (06:57 -0500)]
drm/amd/amdgpu: Add pcie indirect support to amdgpu_mm_wreg_mmio_rlc()
The function amdgpu_mm_wreg_mmio_rlc() is used by debugfs to write to
MMIO registers. It didn't support registers beyond the BAR mapped MMIO
space. This adds pcie indirect write support.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nirmoy Das [Fri, 7 Jan 2022 08:51:15 +0000 (09:51 +0100)]
drm/amdgpu: recover gart table at resume
Get rid off pin/unpin of gart BO at resume/suspend and
instead pin only once and try to recover gart content
at resume time. This is much more stable in case there
is OOM situation at 2nd call to amdgpu_device_evict_resources()
while evicting GART table.
v3: remove gart recovery from other places
v2: pin gart at amdgpu_gart_table_vram_alloc()
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nirmoy Das [Fri, 7 Jan 2022 08:51:14 +0000 (09:51 +0100)]
drm/amdgpu: do not pass ttm_resource_manager to vram_mgr
Do not allow exported amdgpu_vram_mgr_*() to accept
any ttm_resource_manager pointer. Also there is no need
to force other module to call a ttm function just to
eventually call vram_mgr functions.
v2: pass adev's vram_mgr instead of adev
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nirmoy Das [Fri, 7 Jan 2022 08:51:13 +0000 (09:51 +0100)]
drm/amdkfd: remove unused function
Remove unused amdgpu_amdkfd_get_vram_usage()
CC: Felix.Kuehling@amd.com Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Fixes: dfcbe6d5f4a340 ("drm/amdgpu: Remove unused function pointers")
Nirmoy Das [Fri, 7 Jan 2022 22:42:28 +0000 (17:42 -0500)]
drm/amdgpu: do not pass ttm_resource_manager to gtt_mgr
Do not allow exported amdgpu_gtt_mgr_*() to accept
any ttm_resource_manager pointer. Also there is no need
to force other module to call a ttm function just to
eventually call gtt_mgr functions.
v4: remove unused adev.
v3: upcast mgr from ttm resopurce manager instead of
getting it from adev.
v2: pass adev's gtt_mgr instead of adev.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leslie Shi [Wed, 5 Jan 2022 02:57:20 +0000 (10:57 +0800)]
drm/amdgpu: Unmap MMIO mappings when device is not unplugged
Patch: 3efb17ae7e92 ("drm/amdgpu: Call amdgpu_device_unmap_mmio() if device
is unplugged to prevent crash in GPU initialization failure") makes call to
amdgpu_device_unmap_mmio() conditioned on device unplugged. This patch unmaps
MMIO mappings even when device is not unplugged.
v2: Add condition of drm_dev_enter() to deleted unmaps in patch
"drm/amdgpu: Unmap all MMIO mappings"
Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Wed, 5 Jan 2022 18:48:16 +0000 (12:48 -0600)]
drm/amd/display: explicitly set is_dsc_supported to false before use
When UBSAN is enabled a case is shown on unplugging the display that
this variable hasn't been initialized by `update_dsc_caps`, presumably
when the display was unplugged it wasn't copied from the DPCD.
Liu Ying [Thu, 30 Dec 2021 04:06:26 +0000 (12:06 +0800)]
drm/atomic: Check new_crtc_state->active to determine if CRTC needs disable in self refresh mode
Actual hardware state of CRTC is controlled by the member 'active' in
struct drm_crtc_state instead of the member 'enable', according to the
kernel doc of the member 'enable'. In fact, the drm client modeset
and atomic helpers are using the member 'active' to do the control.
Referencing the member 'enable' of new_crtc_state, the function
crtc_needs_disable() may fail to reflect if CRTC needs disable in
self refresh mode, e.g., when the framebuffer emulation will be blanked
through the client modeset helper with the next commit, the member
'enable' of new_crtc_state is still true while the member 'active' is
false, hence the relevant potential encoder and bridges won't be disabled.
So, let's check new_crtc_state->active to determine if CRTC needs disable
in self refresh mode instead of new_crtc_state->enable.
Fixes: 1452c25b0e60 ("drm: Add helpers to kick off self refresh mode in drivers") Cc: Sean Paul <seanpaul@chromium.org> Cc: Rob Clark <robdclark@chromium.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211230040626.646807-1-victor.liu@nxp.com
Miaoqian Lin [Fri, 7 Jan 2022 08:36:32 +0000 (08:36 +0000)]
drm/sun4i: dw-hdmi: Fix missing put_device() call in sun8i_hdmi_phy_get
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling path.
Matthew Auld [Thu, 6 Jan 2022 17:49:10 +0000 (17:49 +0000)]
drm/i915/ttm: ensure we unmap when purging
Purging can happen during swapping out, or directly invoked with the
madvise ioctl. In such cases this doesn't involve a ttm move, which
skips umapping the object.
v2(Thomas):
- add ttm_truncate helper, and just call into i915_ttm_move_notify() to
handle the unmapping step
Matthew Auld [Thu, 6 Jan 2022 17:49:09 +0000 (17:49 +0000)]
drm/i915/ttm: add unmap_virtual callback
Ensure we call ttm_bo_unmap_virtual when releasing the pages.
Importantly this should now handle the ttm swapping case, and all other
places that already call into i915_ttm_move_notify().
Matthew Auld [Thu, 6 Jan 2022 17:49:07 +0000 (17:49 +0000)]
drm/i915: don't call free_mmap_offset when purging
The TTM backend is in theory the only user here(also purge should only
be called once we have dropped the pages), where it is setup at object
creation and is only removed once the object is destroyed. Also
resetting the node here might be iffy since the ttm fault handler
uses the stored fake offset to determine the page offset within the pages
array.
This also blows up in the dontneed-before-mmap test, since the
expectation is that the vma_node will live on, until the object is
destroyed:
Mikita Lipski [Wed, 15 Dec 2021 16:01:45 +0000 (11:01 -0500)]
drm/amd/display: introduce mpo detection flags
[why]
We want to know if new crtc state is enabling MPO configuration before
enabling it.
[how]
Detect if both primary and overlay planes are enabled on the same CRTC.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Wed, 15 Dec 2021 23:18:41 +0000 (18:18 -0500)]
drm/amd/display: Don't reinitialize DMCUB on s0ix resume
[Why]
PSP will suspend and resume DMCUB. Driver should just wait for DMCUB to
finish the auto load before continuining instead of placing it into
reset, wiping its firmware state and reinitializing.
If we don't let DMCUB fully finish initializing for S0ix then some state
will be lost and screen corruption can occur due to incorrect address
translation.
[How]
Use dmub_srv callbacks to determine in DMCUB is running and wait for
auto-load to complete before continuining.
In S0ix DMCUB will be running and DAL fw so initialize will skip.
In S3 DMCUB will not be running and we will do a full hardware init.
In S3 DMCUB will be running but will not be DAL fw so we will also do
a full hardware init.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Mon, 13 Dec 2021 23:29:27 +0000 (18:29 -0500)]
drm/amd/display: unhard code link to phy idx mapping in dc link and clean up
[why]
1. Current code hard codes link to PHY mapping in dc link level per asic
per revision.
This is not scalable. In long term the mapping will be obatined from
DMUB and store in dc resource.
2. Depending on DCN revision and endpoint type, the definition of
dio_output_idx dio_output_type and phy_idx are not consistent. We need
to unify the meaning of these hardware indices across different system
configuration.
[how]
1. Temporarly move the hardcoded mapping to dc_resource level, which
should have full awareness of asic specific configuration and add a TODO
comment to move the mapping to DMUB.
2. populate dio_output_idx/phy_idx for all configuration, define
usb4_enabled bit instead of dio_output_type as an external enum.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yi-Ling Chen [Mon, 13 Dec 2021 08:13:26 +0000 (16:13 +0800)]
drm/amd/display: Fix underflow for fused display pipes case
[Why]
Depend on res_pool->res_cap->num_timing_generator to query timing
gernerator information, it would case underflow at the fused display
pipes case.
Due to the res_pool->res_cap->num_timing_generator records default
timing generator resource built in driver, not the current chip.
[How]
Some ASICs would be fused display pipes less than the default setting.
In dcnxx_resource_construct function, driver would obatin real timing
generator count and store it into res_pool->timing_generator_count.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Yi-Ling Chen <Yi-Ling.Chen2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Wed, 29 Dec 2021 19:56:09 +0000 (13:56 -0600)]
drm/amdgpu: don't set s3 and s0ix at the same time
This makes it clearer which codepaths are in use specifically in
one state or the other.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Wed, 29 Dec 2021 19:58:02 +0000 (13:58 -0600)]
drm/amdgpu: explicitly check for s0ix when evicting resources
This codepath should be running in both s0ix and s3, but only does
currently because s3 and s0ix are both set in the s0ix case.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Yao [Wed, 29 Dec 2021 10:10:32 +0000 (18:10 +0800)]
drm/amdgpu: add dummy event6 for vega10
[why]
Malicious mailbox event1 fails driver loading on vega10.
A dummy event6 prevent driver from taking response from malicious event1 as its own.
[how]
On vega10, send a mailbox event6 before sending event1.
Signed-off-by: James Yao <yiqing.yao@amd.com> Reviewed-by: Jingwen Chen <Jingwen.Chen2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is used in meson-gx and meson-g12. Add the property to the binding.
This fixes the dtschema warning:
hdmi-tx@c883a000: 'sound-name-prefix' does not match any of the
regexes: 'pinctrl-[0-9]+'
This property was already mentioned in the old textual bindings
amlogic,meson-vpu.txt, but got dropped during conversion.
Adding it back similar to amlogic,gx-vdec.yaml.
Fixes: 6b9ebf1e0e67 ("dt-bindings: display: amlogic, meson-vpu: convert to yaml") Signed-off-by: Alexander Stein <alexander.stein@mailbox.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211219094155.177206-1-alexander.stein@mailbox.org
Alex Deucher [Fri, 12 Nov 2021 16:25:30 +0000 (11:25 -0500)]
drm/amdgpu: always reset the asic in suspend (v2)
If the platform suspend happens to fail and the power rail
is not turned off, the GPU will be in an unknown state on
resume, so reset the asic so that it will be in a known
good state on resume even if the platform suspend failed.
v2: handle s0ix
Acked-by: Luben Tuikov <luben.tuikov@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Fri, 17 Dec 2021 11:05:06 +0000 (19:05 +0800)]
drm/amdgpu: put SMU into proper state on runpm suspending for BOCO capable platform
By setting mp1_state as PP_MP1_STATE_UNLOAD, MP1 will do some proper cleanups and
put itself into a state ready for PNP. That can workaround some random resuming
failure observed on BOCO capable platforms.
Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yizhuo Zhai [Sat, 18 Dec 2021 04:22:23 +0000 (20:22 -0800)]
drm/amd/display: Fix the uninitialized variable in enable_stream_features()
In function enable_stream_features(), the variable "old_downspread.raw"
could be uninitialized if core_link_read_dpcd() fails, however, it is
used in the later if statement, and further, core_link_write_dpcd()
may write random value, which is potentially unsafe.
Fixes: 6016cd9dba0f ("drm/amd/display: add helper for enabling mst stream features") Cc: stable@vger.kernel.org Signed-off-by: Yizhuo Zhai <yzhai003@ucr.edu> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 21 Dec 2021 14:54:40 +0000 (09:54 -0500)]
drm/amdgpu: fix runpm documentation
It's not only supported by HG/PX laptops. It's supported
by all dGPUs which supports BOCO/BACO functionality (runtime
D3).
BOCO - Bus Off, Chip Off. The entire chip is powered off.
This is controlled by ACPI.
BACO - Bus Active, Chip Off. The chip still shows up
on the PCI bus, but the device itself is powered
down.
v2: fix missed HG/PX reference
Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Marina Nikolic [Tue, 14 Dec 2021 12:57:53 +0000 (20:57 +0800)]
amdgpu/pm: Make sysfs pm attributes as read-only for VFs
== Description ==
Setting values of pm attributes through sysfs
should not be allowed in SRIOV mode.
These calls will not be processed by FW anyway,
but error handling on sysfs level should be improved.
== Changes ==
This patch prohibits performing of all set commands
in SRIOV mode on sysfs level.
It offers better error handling as calls that are
not allowed will not be propagated further.
== Test ==
Writing to any sysfs file in passthrough mode will succeed.
Writing to any sysfs file in ONEVF mode will yield error:
"calling process does not have sufficient permission to execute a command".
Signed-off-by: Marina Nikolic <Marina.Nikolic@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Fri, 10 Dec 2021 19:22:19 +0000 (14:22 -0500)]
drm/amd/display: get and restore link res map
[why]
When reboot the link res map should be persisted. So during boot up,
driver will look at the map to determine which link should take priority
to use certain link res. This is to ensure that link res remains
unshuffled after a reboot.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Mon, 29 Nov 2021 19:43:02 +0000 (14:43 -0500)]
drm/amd/display: support dynamic HPO DP link encoder allocation
[why]
When there are more DP2.0 RXs connected than the number HPO DP link
encoders we have, we need to dynamically allocate HPO DP link encoder to
the port that needs it.
[how]
Only allocate HPO DP link encoder when it is needed.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Sat, 27 Nov 2021 00:10:34 +0000 (19:10 -0500)]
drm/amd/display: access hpo dp link encoder only through link resource
[why]
Update all accesses to use hpo dp link encoder through link resource
only.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Fri, 26 Nov 2021 23:46:22 +0000 (18:46 -0500)]
drm/amd/display: populate link res in both detection and validation
[why]
This commit is to populate link res in preparation of the next commit.
The next commit will replace all existing code to use link res instead
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Thu, 25 Nov 2021 17:30:50 +0000 (12:30 -0500)]
drm/amd/display: define link res and make it accessible to all link interfaces
[why]
There will be a series of re-arch changes in Link Resource Management.
They are more and more muxable link resource objects and the resource is
insufficient for a one to one allocation to all links created.
Therefore a link resource sharing logic is required to determine which
link should use certain link resource.
This commit is the first one in this series that starts by defining a
link resource struct, this struct will be available to all interfaces
that need to perform link programming sequence.
In later commits, we will granduately decouple link resource objects out
of dc link. So instead of access a link resource from dc link. Current
link's resource can be accessible through pipe_ctx->link_res during
commit, or by calling dc_link_get_cur_link_res function with current
link passed in after commit.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen [Thu, 9 Dec 2021 01:28:14 +0000 (20:28 -0500)]
drm/amd/display: Remove CR AUX RD Interval limit for LTTPR
[Why]
DP spec specifies that DPRX shall use the read interval in the
TRAINING_AUX_RD_INTERVAL_PHY_REPEATER LTTPR DPCD register. This
register's bit definition is the same as the AUX read interval register
for DPRX.
[How}
Remove logic which forces AUX read interval to 100us for repeaters when
in LTTPR non-transparent mode.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Wesley Chalmers <wesley.chalmers@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: George Shen <George.Shen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Fri, 3 Dec 2021 21:29:05 +0000 (16:29 -0500)]
drm/amd/display: Fix check for null function ptr
[Why]
Bug fix for null function ptr (should check for NULL instead of not
NULL)
[How]
Fix if condition
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Samson Tam <samson.tam@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lai, Derek [Mon, 6 Dec 2021 09:10:59 +0000 (17:10 +0800)]
drm/amd/display: Added power down for DCN10
[Why]
The change of setting a timer callback on boot for 10 seconds is still
working, just lacked power down for DCN10.
[How]
Added power down for DCN10.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Derek Lai <Derek.Lai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Tue, 7 Dec 2021 17:58:07 +0000 (12:58 -0500)]
drm/amd/display: Block z-states when stutter period exceeds criteria
[Why]
Stutter period won't be less than 5000.0, but if PSR is enabled then we
can potentially enter Z9 when MPO is enabled.
SMU will try to enter Z9 too early in these cases (before PSR is
enabled) and we'll see underflow.
[How]
Block z-states (z9, z10) until we can add a new interface to SMU to
signal when we can support z10 but not z9.
We can revert this once the interface change is in.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shen, George [Tue, 7 Dec 2021 21:53:12 +0000 (16:53 -0500)]
drm/amd/display: Refactor vendor specific link training sequence
[Why]
Current implementation is not scalable and retrofits the existing
standard link training code for purposes outside of its original design.
[How]
Refactor vendor specific link training sequence into its own separate
function to be called instead of the standard link training function.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: George Shen <George.Shen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Mon, 6 Dec 2021 02:19:30 +0000 (21:19 -0500)]
drm/amd/display: fix B0 TMDS deepcolor no dislay issue
[why]
B0 PHY C map to F, D map to G driver use logic instance, dmub does the
remap. Driver still need use the right PHY instance to access right HW.
[how]
use phyical instance when program PHY register.
[note]
could move resync_control programming to dmub next.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Surbhi Kakarya [Fri, 17 Dec 2021 17:01:09 +0000 (12:01 -0500)]
drm/amdgpu: Check the memory can be accesssed by ttm_device_clear_dma_mappings.
If the event guard is enabled and VF doesn't receive an ack from PF for full access,
the guest driver load crashes.
This is caused due to the call to ttm_device_clear_dma_mappings with non-initialized
mman during driver tear down.
This patch adds the necessary condition to check if the mman initialization passed or not
and takes the path based on the condition output.
Signed-off-by: Surbhi Kakarya <Surbhi.Kakarya@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guchun Chen [Fri, 17 Dec 2021 05:21:20 +0000 (13:21 +0800)]
drm/amdkfd: correct sdma queue number in kfd device init (v3)
This patch keeps the setting of sdma queue number to the same
after recent KFD code refactor. Additionally, improve code to
use switch case to list IP version to complete kfd device_info
structure filling for IH version assignment. This makes consistency
with the IP parse code in amdgpu_discovery.c.
v2: use dev_warn for the default switch case;
set default sdma queue per engine(8) and IH handler to v9. (Jonathan)
v3: Fix missed IP version check of Raven.
Fixes: f0dc99a6f742bc ("drm/amdkfd: add kfd_device_info_init function") Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Graham Sider <Graham.Sider@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kent Russell [Mon, 13 Dec 2021 18:59:43 +0000 (13:59 -0500)]
drm/amdgpu: Access the FRU on Aldebaran
This is supported, although the offset is different from VG20, so fix
that with a variable and enable getting the product name and serial
number from the FRU. Do this for all SKUs since all SKUs have the FRU
Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kent Russell [Mon, 13 Dec 2021 18:58:40 +0000 (13:58 -0500)]
drm/amdgpu: Only overwrite serial if field is empty
On Aldebaran, the serial may be obtained from the FRU. Only overwrite
the serial with the unique_id if the serial is empty. This will support
printing serial numbers for mGPU devices where there are 2 unique_ids
for the 2 GPUs, but only one serial number for the board
Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kent Russell [Mon, 13 Dec 2021 18:15:20 +0000 (13:15 -0500)]
drm/amdgpu: Enable unique_id for Aldebaran
It's supported, so support the unique_id sysfs file
Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kent Russell [Mon, 13 Dec 2021 18:14:17 +0000 (13:14 -0500)]
drm/amdgpu: Increase potential product_name to 64 characters
Having seen at least 1 42-character product_name, bump the number up to
64, and put that definition into amdgpu.h to make future adjustments
simpler.
Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
yipechai [Wed, 8 Dec 2021 08:04:14 +0000 (16:04 +0800)]
drm/amdgpu: Remove the redundant code of psp bootloader functions
The psp bootloader functions code of psp_v13_0.c had been
optimized before. According the code style of psp_v13_0.c
to remove the redundant code of psp_v11_0.c.
Leslie Shi [Thu, 16 Dec 2021 06:03:41 +0000 (14:03 +0800)]
drm/amdgpu: Call amdgpu_device_unmap_mmio() if device is unplugged to prevent crash in GPU initialization failure
[Why]
In amdgpu_driver_load_kms, when amdgpu_device_init returns error during driver modprobe, it
will start the error handle path immediately and call into amdgpu_device_unmap_mmio as well
to release mapped VRAM. However, in the following release callback, driver stills visits the
unmapped memory like vcn.inst[i].fw_shared_cpu_addr in vcn_v3_0_sw_fini. So a kernel crash occurs.
[How]
call amdgpu_device_unmap_mmio() if device is unplugged to prevent invalid memory address in
vcn_v3_0_sw_fini() when GPU initialization failure.
Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Wed, 29 Dec 2021 04:02:10 +0000 (14:02 +1000)]
Merge tag 'drm-msm-next-2021-12-26' of ssh://gitlab.freedesktop.org/drm/msm into drm-next
* dpu plane state cleanup in prep for multirect
* dpu debugfs cleanup (and moving things to atomic_print_state) in prep
for multirect
* dp support for sc7280
* struct_mutex removal
* include more GMU state in gpu devcore dumps
* add support for a506
* remove old eDP sub-driver (never was used in any upstream supported
devices and modern things with eDP will use DP sub-driver instead)
* debugfs to disable hw gpu hang detect for (igt tests)
* debugfs for dumping display hw state
* and the usual assortment of cleanup and bug fixes
There still seems to be a timing issue with dpu, showing up on sc7180
devices, after the bridge probe-order change. Ie. things work great if
loglevel is high enough (or enough debug options are enabled, etc).
We'll continue to debug this in the new year.
Zongmin Zhou [Wed, 15 Dec 2021 09:23:37 +0000 (17:23 +0800)]
drm/amdgpu: fixup bad vram size on gmc v8
Some boards(like RX550) seem to have garbage in the upper
16 bits of the vram size register. Check for
this and clamp the size properly. Fixes
boards reporting bogus amounts of vram.
after add this patch,the maximum GPU VRAM size is 64GB,
otherwise only 64GB vram size will be used.
Signed-off-by: Zongmin Zhou<zhouzongmin@kylinos.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[How]
That assignment occurs later depending on the ASIC version. It's only
needed on DCN31 and only after link_enc is already assigned.
Fixes: 986430446c917b ("drm/amd/display: fix a crash on USB4 over C20 PHY") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sashank saye [Fri, 17 Dec 2021 12:50:09 +0000 (07:50 -0500)]
drm/amdgpu: Send Message to SMU on aldebaran passthrough for sbr handling
For Aldebaran chip passthrough case we need to intimate SMU
about special handling for SBR.On older chips we send
LightSBR to SMU, enabling the same for Aldebaran. Slight
difference, compared to previous chips, is on Aldebaran, SMU
would do a heavy reset on SBR. Hence, the word Heavy
instead of Light SBR is used for SMU to differentiate.
Rajneesh Bhardwaj [Fri, 26 Nov 2021 20:15:04 +0000 (15:15 -0500)]
drm/amdgpu: Don't inherit GEM object VMAs in child process
When an application having open file access to a node forks, its shared
mappings also get reflected in the address space of child process even
though it cannot access them with the object permissions applied. With the
existing permission checks on the gem objects, it might be reasonable to
also create the VMAs with VM_DONTCOPY flag so a user space application
doesn't need to explicitly call the madvise(addr, len, MADV_DONTFORK)
system call to prevent the pages in the mapped range to appear in the
address space of the child process. It also prevents the memory leaks
due to additional reference counts on the mapped BOs in the child
process that prevented freeing the memory in the parent for which we had
worked around earlier in the user space inside the thunk library.
Additionally, we faced this issue when using CRIU to checkpoint restore
an application that had such inherited mappings in the child which
confuse CRIU when it mmaps on restore. Having this flag set for the
render node VMAs helps. VMAs mapped via KFD already take care of this so
this is needed only for the render nodes.
To limit the impact of the change to user space consumers such as OpenGL
etc, limit it to KFD BOs only.
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: David Yat Sin <david.yatsin@amd.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / users / jedix / linux-maple.git / log