Christoph Hellwig [Thu, 17 Apr 2025 06:40:42 +0000 (08:40 +0200)]
fs: move the bdex_statx call to vfs_getattr_nosec
Currently bdex_statx is only called from the very high-level
vfs_statx_path function, and thus bypassing it for in-kernel calls
to vfs_getattr or vfs_getattr_nosec.
This breaks querying the block ѕize of the underlying device in the
loop driver and also is a pitfall for any other new kernel caller.
Move the call into the lowest level helper to ensure all callers get
the right results.
Fixes: 2d985f8c6b91 ("vfs: support STATX_DIOALIGN on block devices") Fixes: f4774e92aab8 ("loop: take the file system minimum dio alignment into account") Reported-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/20250417064042.712140-1-hch@lst.de Signed-off-by: Christian Brauner <brauner@kernel.org>
GCC 15's new -Wunterminated-string-initialization notices that the
character lookup tables "fscache_cache_states" and "fscache_cookie_states"
(which are not used as a C-String) need to be marked as "nonstring":
fs/netfs/fscache_cache.c:375:67: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (6 chars into 5 available) [-Wunterminated-string-initialization]
375 | static const char fscache_cache_states[NR__FSCACHE_CACHE_STATE] = "-PAEW";
| ^~~~~~~
fs/netfs/fscache_cookie.c:32:69: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (11 chars into 10 available) [-Wunterminated-string-initialization]
32 | static const char fscache_cookie_states[FSCACHE_COOKIE_STATE__NR] = "-LCAIFUWRD";
| ^~~~~~~~~~~~
Joe Damato [Wed, 16 Apr 2025 18:58:25 +0000 (18:58 +0000)]
eventpoll: Set epoll timeout if it's in the future
Avoid an edge case where epoll_wait arms a timer and calls schedule()
even if the timer will expire immediately.
For example: if the user has specified an epoll busy poll usecs which is
equal or larger than the epoll_wait/epoll_pwait2 timeout, it is
unnecessary to call schedule_hrtimeout_range; the busy poll usecs have
consumed the entire timeout duration so it is unnecessary to induce
scheduling latency by calling schedule() (via schedule_hrtimeout_range).
This can be measured using a simple bpftrace script:
Which is unexpected; the busy poll usecs should have consumed the
entire timeout and there should be no reason to arm a timer.
After this patch is applied: the same test scenario does not generate a
call to schedule() in the above edge case. If the busy poll usecs are
reduced (for example usecs: 100, epoll_wait timeout 1ms) the timer is
armed as expected.
Fixes: bf3b9f6372c4 ("epoll: Add busy poll support to epoll with socket fds.") Signed-off-by: Joe Damato <jdamato@fastly.com> Link: https://lore.kernel.org/20250416185826.26375-1-jdamato@fastly.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org>
Christian Brauner [Tue, 15 Apr 2025 10:01:08 +0000 (12:01 +0200)]
fs: ensure that *path_locked*() helpers leave passed path pristine
The functions currently leaving dangling pointers in the passed-in path
leading to hard to debug bugs in the long run. Ensure that the path is
left in pristine state just like we do in e.g., path_parentat() and
other helpers.
Christian Brauner [Mon, 14 Apr 2025 20:13:33 +0000 (22:13 +0200)]
fs: add kern_path_locked_negative()
The audit code relies on the fact that kern_path_locked() returned a
path even for a negative dentry. If it doesn't find a valid dentry it
immediately calls:
which assumes that parent_path.dentry is still valid. But it isn't since
kern_path_locked() has been changed to path_put() also for a negative
dentry.
Fix this by adding a helper that implements the required audit semantics
and allows us to fix the immediate bleeding. We can find a unified
solution for this afterwards.
Link: https://lore.kernel.org/20250414-rennt-wimmeln-f186c3a780f1@brauner Fixes: 1c3cb50b58c3 ("VFS: change kern_path_locked() and user_path_locked_at() to never return negative dentry") Reported-and-tested-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org>
Christian Brauner [Tue, 15 Apr 2025 07:45:38 +0000 (09:45 +0200)]
hfs{plus}: add deprecation warning
Both the hfs and hfsplus filesystem have been orphaned since at least
2014, i.e., over 10 years. It's time to remove them from the kernel as
they're exhibiting more and more issues and no one is stepping up to
fixing them.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Merge tag 'vfs-6.15-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix NULL pointer dereference in virtiofs
- Fix slab OOB access in hfs/hfsplus
- Only create /proc/fs/netfs when CONFIG_PROC_FS is set
- Fix getname_flags() to initialize pointer correctly
- Convert dentry flags to enum
- Don't allow datadir without lowerdir in overlayfs
- Use namespace_{lock,unlock} helpers in dissolve_on_fput() instead of
plain namespace_sem so unmounted mounts are properly cleaned up
- Skip unnecessary ifs_block_is_uptodate check in iomap
- Remove an unused forward declaration in overlayfs
- Fix devpts uid/gid handling after converting to the new mount api
- Fix afs_dynroot_readdir() to not use the RCU read lock
- Fix mount_setattr() and open_tree_attr() to not pointlessly do path
lookup or walk the mount tree if no mount option change has been
requested
* tag 'vfs-6.15-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: use namespace_{lock,unlock} in dissolve_on_fput()
iomap: skip unnecessary ifs_block_is_uptodate check
fs: Fix filename init after recent refactoring
netfs: Only create /proc/fs/netfs with CONFIG_PROC_FS
mount: ensure we don't pointlessly walk the mount tree
dcache: convert dentry flag macros to enum
afs: Fix afs_dynroot_readdir() to not use the RCU read lock
hfs/hfsplus: fix slab-out-of-bounds in hfs_bnode_read_key
virtiofs: add filesystem context source name check
devpts: Fix type for uid and gid params
ovl: remove unused forward declaration
ovl: don't allow datadir only
Merge tag 'perf-tools-fixes-for-v6.15-2025-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"A couple of fixes and the usual tooling header updates:
- fix a build error on ARM64 when libunwind is requested
- fix an infinite loop with branch stack on AMD Zen3
- sync tooling headers with the kernel source"
* tag 'perf-tools-fixes-for-v6.15-2025-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf tools: Remove evsel__handle_error_quirks()
perf libunwind arm64: Fix missing close parens in an if statement
tools headers: Update the arch/x86/lib/memset_64.S copy with the kernel sources
tools headers: Update the x86 headers with the kernel sources
tools headers: Update the linux/unaligned.h copy with the kernel sources
tools headers: Update the uapi/asm-generic/mman-common.h copy with the kernel sources
tools headers: Update the uapi/linux/prctl.h copy with the kernel sources
tools headers: Update the syscall table with the kernel sources
tools headers: Update the VFS headers with the kernel sources
tools headers: Update the uapi/linux/perf_event.h copy with the kernel sources
tools headers: Update the socket headers with the kernel sources
tools headers: Update the KVM headers with the kernel sources
Merge tag 'erofs-for-6.15-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Properly handle errors when file-backed I/O fails
- Fix compilation issues on ARM platform (arm-linux-gnueabi)
- Fix parsing of encoded extents
- Minor cleanup
* tag 'erofs-for-6.15-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: remove duplicate code
erofs: fix encoded extents handling
erofs: add __packed annotation to union(__le16..)
erofs: set error to bio if file-backed IO fails
Merge tag 'ext4_for_linus-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"A few more miscellaneous ext4 bug fixes and cleanups including some
syzbot failures and fixing a stale file handing refeencing an inode
previously used as a regular file, but which has been deleted and
reused as an ea_inode would result in ext4 erroneously considering
this a case of fs corruption"
* tag 'ext4_for_linus-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix off-by-one error in do_split
ext4: make block validity check resistent to sb bh corruption
ext4: avoid -Wflex-array-member-not-at-end warning
Documentation: ext4: Add fields to ext4_super_block documentation
ext4: don't treat fhandle lookup of ea_inode as FS corruption
Syzkaller detected a use-after-free issue in ext4_insert_dentry that was
caused by out-of-bounds access due to incorrect splitting in do_split.
BUG: KASAN: use-after-free in ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109
Write of size 251 at addr ffff888074572f14 by task syz-executor335/5847
The following loop is located right above 'if' statement.
for (i = count-1; i >= 0; i--) {
/* is more than half of this entry in 2nd half of the block? */
if (size + map[i].size/2 > blocksize/2)
break;
size += map[i].size;
move++;
}
'i' in this case could go down to -1, in which case sum of active entries
wouldn't exceed half the block size, but previous behaviour would also do
split in half if sum would exceed at the very last block, which in case of
having too many long name files in a single block could lead to
out-of-bounds access and following use-after-free.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Cc: stable@vger.kernel.org Fixes: 5872331b3d91 ("ext4: fix potential negative array index in do_split()") Signed-off-by: Artem Sadovnikov <a.sadovnikov@ispras.ru> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20250404082804.2567-3-a.sadovnikov@ispras.ru Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ojaswin Mujoo [Fri, 28 Mar 2025 06:24:52 +0000 (11:54 +0530)]
ext4: make block validity check resistent to sb bh corruption
Block validity checks need to be skipped in case they are called
for journal blocks since they are part of system's protected
zone.
Currently, this is done by checking inode->ino against
sbi->s_es->s_journal_inum, which is a direct read from the ext4 sb
buffer head. If someone modifies this underneath us then the
s_journal_inum field might get corrupted. To prevent against this,
change the check to directly compare the inode with journal->j_inode.
**Slight change in behavior**: During journal init path,
check_block_validity etc might be called for journal inode when
sbi->s_journal is not set yet. In this case we now proceed with
ext4_inode_block_valid() instead of returning early. Since systems zones
have not been set yet, it is okay to proceed so we can perform basic
checks on the blocks.
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the `DEFINE_RAW_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warning:
fs/ext4/mballoc.c:3041:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <kees@kernel.org> Link: https://patch.msgid.link/Z-SF97N3AxcIMlSi@kspp Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Tom Vierjahn [Mon, 24 Mar 2025 22:09:30 +0000 (23:09 +0100)]
Documentation: ext4: Add fields to ext4_super_block documentation
Documentation and implementation of the ext4 super block have
slightly diverged: Padding has been removed in order to make room for
new fields that are still missing in the documentation.
Add the new fields s_encryption_level, s_first_error_errorcode,
s_last_error_errorcode to the documentation of the ext4 super block.
Fixes: f542fbe8d5e8 ("ext4 crypto: reserve codepoints used by the ext4 encryption feature") Fixes: 878520ac45f9 ("ext4: save the error code which triggered an ext4_error() in the superblock") Signed-off-by: Tom Vierjahn <tom.vierjahn@acm.org> Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> Link: https://patch.msgid.link/20250324221004.5268-1-tom.vierjahn@acm.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Merge tag 'trace-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Hide get_vm_area() from MMUless builds
The function get_vm_area() is not defined when CONFIG_MMU is not
defined. Hide that function within #ifdef CONFIG_MMU.
- Fix output of synthetic events when they have dynamic strings
The print fmt of the synthetic event's format file use to have "%.*s"
for dynamic size strings even though the user space exported
arguments had only __get_str() macro that provided just a nul
terminated string. This was fixed so that user space could parse this
properly.
But the reason that it had "%.*s" was because internally it provided
the maximum size of the string as one of the arguments. The fix that
replaced "%.*s" with "%s" caused the trace output (when the kernel
reads the event) to write "(efault)" as it would now read the length
of the string as "%s".
As the string provided is always nul terminated, there's no reason
for the internal code to use "%.*s" anyway. Just remove the length
argument to match the "%s" that is now in the format.
- Fix the ftrace subops hash logic of the manager ops hash
The function_graph uses the ftrace subops code. The subops code is a
way to have a single ftrace_ops registered with ftrace to determine
what functions will call the ftrace_ops callback. More than one user
of function graph can register a ftrace_ops with it. The function
graph infrastructure will then add this ftrace_ops as a subops with
the main ftrace_ops it registers with ftrace. This is because the
functions will always call the function graph callback which in turn
calls the subops ftrace_ops callbacks.
The main ftrace_ops must add a callback to all the functions that the
subops want a callback from. When a subops is registered, it will
update the main ftrace_ops hash to include the functions it wants.
This is the logic that was broken.
The ftrace_ops hash has a "filter_hash" and a "notrace_hash" where
all the functions in the filter_hash but not in the notrace_hash are
attached by ftrace. The original logic would have the main ftrace_ops
filter_hash be a union of all the subops filter_hashes and the main
notrace_hash would be a intersect of all the subops filter hashes.
But this was incorrect because the notrace hash depends on the
filter_hash it is associated to and not the union of all
filter_hashes.
Instead, when a subops is added, just include all the functions of
the subops hash that are in its filter_hash but not in its
notrace_hash. The main subops hash should not use its notrace hash,
unless all of its subops hashes have an empty filter_hash (which
means to attach to all functions), and then, and only then, the main
ftrace_ops notrace hash can be the intersect of all the subops
hashes.
This not only fixes the bug, but also simplifies the code.
- Add a selftest to better test the subops filtering
Add a selftest that would catch the bug fixed by the above change.
- Fix extra newline printed in function tracing with retval
The function parameter code changed the output logic slightly and
called print_graph_retval() and also printed a newline. The
print_graph_retval() also prints a newline which caused blank lines
to be printed in the function graph tracer when retval was added.
This caused one of the selftests to fail if retvals were enabled.
Instead remove the new line output from print_graph_retval() and have
the callers always print the new line so that it doesn't have to do
special logic if it calls print_graph_retval() or not.
- Fix out-of-bound memory access in the runtime verifier
When rv_is_container_monitor() is called on the last entry on the
link list it references the next entry, which is the list head and
causes an out-of-bound memory access.
* tag 'trace-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix out-of-bound memory access in rv_is_container_monitor()
ftrace: Do not have print_graph_retval() add a newline
tracing/selftest: Add test to better test subops filtering of function graph
ftrace: Fix accounting of subop hashes
ftrace: Properly merge notrace hashes
tracing: Do not add length to print format in synthetic events
tracing: Hide get_vm_area() from MMUless builds
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Followup fixes for resilient spinlock (Kumar Kartikeya Dwivedi):
- Make res_spin_lock test less verbose, since it was spamming BPF
CI on failure, and make the check for AA deadlock stronger
- Fix rebasing mistake and use architecture provided
res_smp_cond_load_acquire
- Convert BPF maps (queue_stack and ringbuf) to resilient spinlock
to address long standing syzbot reports
- Make sure that classic BPF load instruction from SKF_[NET|LL]_OFF
offsets works when skb is fragmeneted (Willem de Bruijn)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Convert ringbuf map to rqspinlock
bpf: Convert queue_stack map to rqspinlock
bpf: Use architecture provided res_smp_cond_load_acquire
selftests/bpf: Make res_spin_lock AA test condition stronger
selftests/net: test sk_filter support for SKF_NET_OFF on frags
bpf: support SKF_NET_OFF and SKF_LL_OFF on skb frags
selftests/bpf: Make res_spin_lock test less verbose
Nam Cao [Fri, 11 Apr 2025 07:37:17 +0000 (09:37 +0200)]
rv: Fix out-of-bound memory access in rv_is_container_monitor()
When rv_is_container_monitor() is called on the last monitor in
rv_monitors_list, KASAN yells:
BUG: KASAN: global-out-of-bounds in rv_is_container_monitor+0x101/0x110
Read of size 8 at addr ffffffff97c7c798 by task setup/221
The buggy address belongs to the variable:
rv_monitors_list+0x18/0x40
This is due to list_next_entry() is called on the last entry in the list.
It wraps around to the first list_head, and the first list_head is not
embedded in struct rv_monitor_def.
Fix it by checking if the monitor is last in the list.
Steven Rostedt [Fri, 11 Apr 2025 17:30:15 +0000 (13:30 -0400)]
ftrace: Do not have print_graph_retval() add a newline
The retval and retaddr options for function_graph tracer will add a
comment at the end of a function for both leaf and non leaf functions that
looks like:
__wake_up_common(); /* ret=0x1 */
} /* pick_next_task_fair ret=0x0 */
The function print_graph_retval() adds a newline after the "*/". But if
that's not called, the caller function needs to make sure there's a
newline added.
This is confusing and when the function parameters code was added, it
added a newline even when calling print_graph_retval() as the fact that
the print_graph_retval() function prints a newline isn't obvious.
This caused an extra newline to be printed and that made it fail the
selftests when the retval option was set, as the selftests were not
expecting blank lines being injected into the trace.
Instead of having print_graph_retval() print a newline, just have the
caller always print the newline regardless if it calls print_graph_retval()
or not. This not only fixes this bug, but it also simplifies the code.
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20250411133015.015ca393@gandalf.local.home Reported-by: Mark Brown <broonie@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Closes: https://lore.kernel.org/all/ccc40f2b-4b9e-4abd-8daf-d22fce2a86f0@sirena.org.uk/ Fixes: ff5c9c576e754 ("ftrace: Add support for function argument to graph tracer") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Merge tag 'pwm/for-6.15-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fixes from Uwe Kleine-König:
"A set of fixes for pwm core and various drivers
The first three patches handle clk_get_rate() returning 0 (which might
happen for example if the CCF is disabled). The first of these was
found because this triggered a warning with clang, the two others by
looking for similar issues in other drivers.
The remaining three fixes address issues in the new waveform pwm API.
Now that I worked on this a bit more, the finer details and corner
cases are better understood and the code is fixed accordingly"
* tag 'pwm/for-6.15-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: axi-pwmgen: Let .round_waveform_tohw() signal when request was rounded up
pwm: stm32: Search an appropriate duty_cycle if period cannot be modified
pwm: Let pwm_set_waveform() succeed even if lowlevel driver rounded up
pwm: fsl-ftm: Handle clk_get_rate() returning 0
pwm: rcar: Improve register calculation
pwm: mediatek: Prevent divide-by-zero in pwm_mediatek_config()
Merge tag 'v6.15-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Fix multichannel decryption UAF
- Fix regression mounting to onedrive shares
- Fix missing mount option check for posix vs. noposix
- Fix version field in WSL symlinks
- Three minor cleanup to reparse point handling
- SMB1 fix for WSL special files
- SMB1 Kerberos fix
- Add SMB3 defines for two new FS attributes
* tag 'v6.15-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: Add defines for two new FileSystemAttributes
cifs: Fix querying of WSL CHR and BLK reparse points over SMB1
cifs: Split parse_reparse_point callback to functions: get buffer and parse buffer
cifs: Improve handling of name surrogate reparse points in reparse.c
cifs: Remove explicit handling of IO_REPARSE_TAG_MOUNT_POINT in inode.c
cifs: Fix encoding of SMB1 Session Setup Kerberos Request in non-UNICODE mode
smb: client: fix UAF in decryption with multichannel
cifs: Fix support for WSL-style symlinks
smb311 client: fix missing tcon check when mounting with linux/posix extensions
cifs: Ensure that all non-client-specific reparse points are processed by the server
Steven Rostedt [Wed, 9 Apr 2025 15:15:51 +0000 (11:15 -0400)]
tracing/selftest: Add test to better test subops filtering of function graph
A bug was discovered that showed the accounting of the subops of the
ftrace_ops filtering was incorrect. Add a new test to better test the
filtering.
This test creates two instances, where it will add various filters to both
the set_ftrace_filter and the set_ftrace_notrace files and enable
function_graph. Then it looks into the enabled_functions file to make sure
that the filters are behaving correctly.
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Andy Chiu <andybnac@gmail.com> Link: https://lore.kernel.org/20250409152720.380778379@goodmis.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Steven Rostedt [Wed, 9 Apr 2025 15:15:50 +0000 (11:15 -0400)]
ftrace: Fix accounting of subop hashes
The function graph infrastructure uses ftrace to hook to functions. It has
a single ftrace_ops to manage all the users of function graph. Each
individual user (tracing, bpf, fprobes, etc) has its own ftrace_ops to
track the functions it will have its callback called from. These
ftrace_ops are "subops" to the main ftrace_ops of the function graph
infrastructure.
Each ftrace_ops has a filter_hash and a notrace_hash that is defined as:
Only trace functions that are in the filter_hash but not in the
notrace_hash.
If the filter_hash is empty, it means to trace all functions.
If the notrace_hash is empty, it means do not disable any function.
The function graph main ftrace_ops needs to be a superset containing all
the functions to be traced by all the subops it has. The algorithm to
perform this merge was incorrect.
When the first subops was added to the main ops, it simply made the main
ops a copy of the subops (same filter_hash and notrace_hash).
When a second ops was added, it joined the new subops filter_hash with the
main ops filter_hash as a union of the two sets. The intersect between the
new subops notrace_hash and the main ops notrace_hash was created as the
new notrace_hash of the main ops.
The issue here is that it would then start tracing functions than no
subops were tracing. For example if you had two subops that had:
subops 1:
filter_hash = '*sched*' # trace all functions with "sched" in it
notrace_hash = '*time*' # except do not trace functions with "time"
subops 2:
filter_hash = '*lock*' # trace all functions with "lock" in it
notrace_hash = '*clock*' # except do not trace functions with "clock"
The intersect of '*time*' functions with '*clock*' functions could be the
empty set. That means the main ops will be tracing all functions with
'*time*' and all "*clock*" in it!
Instead, modify the algorithm to be a bit simpler and correct.
First, when adding a new subops, even if it's the first one, do not add
the notrace_hash if the filter_hash is not empty. Instead, just add the
functions that are in the filter_hash of the subops but not in the
notrace_hash of the subops into the main ops filter_hash. There's no
reason to add anything to the main ops notrace_hash.
The notrace_hash of the main ops should only be non empty iff all subops
filter_hashes are empty (meaning to trace all functions) and all subops
notrace_hashes include the same functions.
That is, the main ops notrace_hash is empty if any subops filter_hash is
non empty.
The main ops notrace_hash only has content in it if all subops
filter_hashes are empty, and the content are only functions that intersect
all the subops notrace_hashes. If any subops notrace_hash is empty, then
so is the main ops notrace_hash.
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Andy Chiu <andybnac@gmail.com> Link: https://lore.kernel.org/20250409152720.216356767@goodmis.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Andy Chiu [Tue, 8 Apr 2025 16:02:57 +0000 (00:02 +0800)]
ftrace: Properly merge notrace hashes
The global notrace hash should be jointly decided by the intersection of
each subops's notrace hash, but not the filter hash.
Cc: stable@vger.kernel.org Link: https://lore.kernel.org/20250408160258.48563-1-andybnac@gmail.com Fixes: 5fccc7552ccb ("ftrace: Add subops logic to allow one ops to manage many") Signed-off-by: Andy Chiu <andybnac@gmail.com>
[ fixed removing of freeing of filter_hash ] Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Zhangfei Gao [Mon, 17 Mar 2025 01:13:52 +0000 (01:13 +0000)]
PCI: Run quirk_huawei_pcie_sva() before arm_smmu_probe_device()
quirk_huawei_pcie_sva() sets properties needed by arm_smmu_probe_device(),
but bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path")
changed the iommu_probe_device() flow so arm_smmu_probe_device() is now
invoked before the quirk, leading to failures like this:
reg-dummy reg-dummy: late IOMMU probe at driver bind, something fishy here!
WARNING: CPU: 0 PID: 1 at drivers/iommu/iommu.c:449 __iommu_probe_device+0x140/0x570
RIP: 0010:__iommu_probe_device+0x140/0x570
The SR-IOV enumeration ordering changes like this:
The non-SR-IOV case is similar in that pci_device_add() is called from
pci_scan_single_device() in the generic enumeration path and
pci_bus_add_device() is called later, after all host bridges have been
enumerated.
Declare quirk_huawei_pcie_sva() as a header fixup to ensure that it happens
before arm_smmu_probe_device().
Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path") Reported-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Closes: https://lore.kernel.org/all/SJ1PR11MB61295DE21A1184AEE0786E25B9D22@SJ1PR11MB6129.namprd11.prod.outlook.com/ Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
[bhelgaas: commit log, add failure info and reporter] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20250317011352.5806-1-zhangfei.gao@linaro.org
Convert the raw spinlock used by BPF ringbuf to rqspinlock. Currently,
we have an open syzbot report of a potential deadlock. In addition, the
ringbuf can fail to reserve spuriously under contention from NMI
context.
It is potentially attractive to enable unconstrained usage (incl. NMIs)
while ensuring no deadlocks manifest at runtime, perform the conversion
to rqspinlock to achieve this.
This change was benchmarked for BPF ringbuf's multi-producer contention
case on an Intel Sapphire Rapids server, with hyperthreading disabled
and performance governor turned on. 5 warm up runs were done for each
case before obtaining the results.
There's a fair amount of noise in the benchmark, with numbers on reruns
going up and down by 10%, so all changes are in the range of this
disturbance, and we see no major regressions.
Namhyung Kim [Thu, 10 Apr 2025 01:02:52 +0000 (18:02 -0700)]
perf tools: Remove evsel__handle_error_quirks()
The evsel__handle_error_quirks() is to fixup invalid event attributes on
some architecture based on the error code. Currently it's only used for
AMD to disable precise_ip not to use IBS which has more restrictions.
But the commit c33aea446bf555ab changed call evsel__precise_ip_fallback
for any errors so there's no difference with the above function. To
make matter worse, it caused a problem with branch stack on Zen3.
The IBS doesn't support branch stack so it should use a regular core
PMU event. The default event is set precise_max and it starts with 3.
And evsel__precise_ip_fallback() tries with it and reduces the level one
by one. At last it tries with 0 but it also failed on Zen3 since the
branch stack is not supported for the cycles event.
At this point, evsel__precise_ip_fallback() restores the original
precise_ip value (3) in the hope that it can succeed with other modifier
(like exclude_kernel). Then evsel__handle_error_quirks() see it has
precise_ip != 0 and make it retry with 0. This created an infinite
loop.
Before:
$ perf record -b -vv |& grep removing
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
...
After:
$ perf record -b true
Error:
Failure to open event 'cycles:P' on PMU 'cpu' which will be removed.
Invalid event (cycles:P) in per-thread mode, enable system wide with '-a'.
Error:
Failure to open any events for recording.
Merge tag 'block-6.15-20250411' of git://git.kernel.dk/linux
Pull more block fixes from Jens Axboe:
"Apparently my internal clock was off, or perhaps it was just wishful
thinking, but I sent out block fixes yesterday as my brain assumed it
was Friday. Subsequently, that missed the NVMe fixes that should go
into this weeks release as well. Hence, here's a followup with those,
and another simple fix.
- NVMe pull request via Christoph:
- nvmet fc/fcloop refcounting fixes (Daniel Wagner)
- fix missed namespace/ANA scans (Hannes Reinecke)
- fix a use after free in the new TCP netns support (Kuniyuki
Iwashima)
- fix a NULL instead of false review in multipath (Uday Shankar)
- Use strscpy() for null_blk disk name copy"
* tag 'block-6.15-20250411' of git://git.kernel.dk/linux:
null_blk: Use strscpy() instead of strscpy_pad() in null_add_dev()
nvmet-fc: put ref when assoc->del_work is already scheduled
nvmet-fc: take tgtport reference only once
nvmet-fc: update tgtport ref per assoc
nvmet-fc: inline nvmet_fc_free_hostport
nvmet-fc: inline nvmet_fc_delete_assoc
nvmet-fcloop: add ref counting to lport
nvmet-fcloop: replace kref with refcount
nvmet-fcloop: swap list_add_tail arguments
nvme-tcp: fix use-after-free of netns by kernel TCP socket.
nvme: multipath: fix return value of nvme_available_path
nvme: re-read ANA log page after ns scan completes
nvme: requeue namespace scan on missed AENs
Merge tag 'iommu-fixes-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Fix two crashes, one in core code and a NULL-ptr dereference in the
Mediatek IOMMU driver
- Dma_ops cleanup fix for core code
- Two fixes for Intel VT-d driver:
- Fix posted MSI issue when users change cpu affinity
- Remove invalid set_dma_ops() call in the iommu driver
- Warning fix for Tegra IOMMU driver
- Suspend/Resume fix for Exynos IOMMU driver
- Probe failure fix for Renesas IOMMU driver
- Cosmetic fix
* tag 'iommu-fixes-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/tegra241-cmdqv: Fix warnings due to dmam_free_coherent()
iommu: remove unneeded semicolon
iommu/mediatek: Fix NULL pointer deference in mtk_iommu_device_group
iommu/exynos: Fix suspend/resume with IDENTITY domain
iommu/ipmmu-vmsa: Register in a sensible order
iommu: Clear iommu-dma ops on cleanup
iommu/vt-d: Remove an unnecessary call set_dma_ops()
iommu/vt-d: Wire up irq_ack() to irq_move_irq() for posted MSIs
iommu: Fix crash in report_iommu_fault()
Merge tag 'acpi-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a recent regression in the ACPI button driver, add quirks
related to EC wakeups from suspend-to-idle and fix coding mistakes
related to the usage of sizeof() in the PPTT parser code:
Summary:
- Add suspend-to-idle EC wakeup quirks for Lenovo Go S (Mario
Limonciello)
- Prevent ACPI button from sending spurions KEY_POWER events to user
space in some cases after a recent update (Mario Limonciello)
- Compute the size of a structure instead of the size of a pointer in
two places in the PPTT parser code (Jean-Marc Eurin)"
* tag 'acpi-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI PPTT: Fix coding mistakes in a couple of sizeof() calls
ACPI: EC: Set ec_no_wakeup for Lenovo Go S
ACPI: button: Only send `KEY_POWER` for `ACPI_BUTTON_NOTIFY_STATUS`
Merge tag 's390-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
"Note that besides two bug fixes this includes three commits for IBM
z17, which was announced this week.
- Add IBM z17 bits:
- Setup elf_platform for new machine types
- Allow to compile the kernel with z17 optimizations
- Add new performance counters
- Fix mismatch between indicator bits and queue indexes in virtio CCW code
- Fix double free in pmu setup error path"
* tag 's390-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cpumf: Fix double free on error in cpumf_pmu_event_init()
s390/cpumf: Update CPU Measurement facility extended counter set support
s390: Allow to compile with z17 optimizations
s390: Add z17 elf platform
s390/virtio_ccw: Don't allocate/assign airqs for non-existing queues
Christian Brauner [Fri, 11 Apr 2025 14:41:48 +0000 (16:41 +0200)]
Merge tag 'ovl-fixes-6.15-rc2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Bring in overlayfs fixes for the current cycle.
* tag 'ovl-fixes-6.15-rc2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: remove unused forward declaration
ovl: don't allow datadir only
Jan Stancek [Thu, 10 Apr 2025 15:05:42 +0000 (17:05 +0200)]
fs: use namespace_{lock,unlock} in dissolve_on_fput()
In commit b73ec10a4587 ("fs: add fastpath for dissolve_on_fput()"),
the namespace_{lock,unlock} has been replaced with scoped_guard
using the namespace_sem. This however now also skips processing of
'unmounted' list in namespace_unlock(), and mount is not (immediately)
cleaned up.
For example, this causes LTP move_mount02 fail:
...
move_mount02.c:80: TPASS: invalid-from-fd: move_mount() failed as expected: EBADF (9)
move_mount02.c:80: TPASS: invalid-from-path: move_mount() failed as expected: ENOENT (2)
move_mount02.c:80: TPASS: invalid-to-fd: move_mount() failed as expected: EBADF (9)
move_mount02.c:80: TPASS: invalid-to-path: move_mount() failed as expected: ENOENT (2)
move_mount02.c:80: TPASS: invalid-flags: move_mount() failed as expected: EINVAL (22)
tst_test.c:1833: TINFO: === Testing on ext3 ===
tst_test.c:1170: TINFO: Formatting /dev/loop0 with ext3 opts='' extra opts=''
mke2fs 1.47.2 (1-Jan-2025)
/dev/loop0 is apparently in use by the system; will not make a filesystem here!
tst_test.c:1170: TBROK: mkfs.ext3 failed with exit code 1
The test makes number of move_mount() calls but these are all designed to fail
with specific errno. Even after test, 'losetup -d' can't detach loop device.
Define a new guard for dissolve_on_fput, that will use namespace_{lock,unlock}.
In iomap_adjust_read_range, i is either the first !uptodate block, or it
is past last for the second loop looking for trailing uptodate blocks.
Assuming there's no overflow (there's no combination of huge folios and
tiny blksize) then yeah, there is no point in retesting that the same
block pointed to by i is uptodate since we hold the folio lock so nobody
else could have set it uptodate.
Signed-off-by: Gou Hao <gouhao@uniontech.com> Link: https://lore.kernel.org/20250410071236.16017-1-gouhao@uniontech.com Reviewed-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
Song Liu [Wed, 9 Apr 2025 22:05:34 +0000 (15:05 -0700)]
fs: Fix filename init after recent refactoring
getname_flags() should save __user pointer "filename" in filename->uptr.
However, this logic is broken by a recent refactoring. Fix it by passing
__user pointer filename to helper initname().
Fixes: 611851010c74 ("fs: dedup handling of struct filename init and refcounts bumps") Cc: Mateusz Guzik <mjguzik@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/20250409220534.3635801-1-song@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
Commit 9748cb2dc393 ("VFS: repack DENTRY_ flags.") changed the value of
DCACHE_MOUNTED, which broke drgn's path_lookup() helper. drgn is forced
to hard-code it because it's a macro, and macros aren't preserved in
debugging information by default.
Enums, on the other hand, are included in debugging information. Convert
the DCACHE_* flag macros to an enum so that debugging tools like drgn
and bpftrace can make use of them.
David Howells [Tue, 8 Apr 2025 20:46:29 +0000 (21:46 +0100)]
afs: Fix afs_dynroot_readdir() to not use the RCU read lock
afs_dynroot_readdir() uses the RCU read lock to walk the cell list whilst
emitting cell automount entries - but dir_emit() may write to a userspace
buffer, thereby causing a fault to occur and waits to happen.
Fix afs_dynroot_readdir() to get a shared lock on net->cells_lock instead.
This can be triggered by enabling lockdep, preconfiguring a number of
cells, doing "mount -t afs none /afs -o dyn" (or using the kafs-client
package with afs.mount systemd unit enabled) and then doing "ls /afs".
Fixes: 1d0b929fc070 ("afs: Change dynroot to create contents on demand") Reported-by: syzbot+3b6c5c6a1d0119b687a1@syzkaller.appspotmail.com Reported-by: syzbot+8245611446194a52150d@syzkaller.appspotmail.com Reported-by: syzbot+1aa62e6852a6ad1c7944@syzkaller.appspotmail.com Reported-by: syzbot+54e6c2176ba76c56217e@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/1638014.1744145189@warthog.procyon.org.uk
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
null_blk: Use strscpy() instead of strscpy_pad() in null_add_dev()
blk_mq_alloc_disk() already zero-initializes the destination buffer,
making strscpy() sufficient for safely copying the disk's name. The
additional NUL-padding performed by strscpy_pad() is unnecessary.
If the destination buffer has a fixed length, strscpy() automatically
determines its size using sizeof() when the argument is omitted. This
makes the explicit size argument unnecessary.
The source string is also NUL-terminated and meets the __must_be_cstr()
requirement of strscpy().
iommu/tegra241-cmdqv: Fix warnings due to dmam_free_coherent()
Two WARNINGs are observed when SMMU driver rolls back upon failure:
arm-smmu-v3.9.auto: Failed to register iommu
arm-smmu-v3.9.auto: probe with driver arm-smmu-v3 failed with error -22
------------[ cut here ]------------
WARNING: CPU: 5 PID: 1 at kernel/dma/mapping.c:74 dmam_free_coherent+0xc0/0xd8
Call trace:
dmam_free_coherent+0xc0/0xd8 (P)
tegra241_vintf_free_lvcmdq+0x74/0x188
tegra241_cmdqv_remove_vintf+0x60/0x148
tegra241_cmdqv_remove+0x48/0xc8
arm_smmu_impl_remove+0x28/0x60
devm_action_release+0x1c/0x40
------------[ cut here ]------------
128 pages are still in use!
WARNING: CPU: 16 PID: 1 at mm/page_alloc.c:6902 free_contig_range+0x18c/0x1c8
Call trace:
free_contig_range+0x18c/0x1c8 (P)
cma_release+0x154/0x2f0
dma_free_contiguous+0x38/0xa0
dma_direct_free+0x10c/0x248
dma_free_attrs+0x100/0x290
dmam_free_coherent+0x78/0xd8
tegra241_vintf_free_lvcmdq+0x74/0x160
tegra241_cmdqv_remove+0x98/0x198
arm_smmu_impl_remove+0x28/0x60
devm_action_release+0x1c/0x40
This is because the LVCMDQ queue memory are managed by devres, while that
dmam_free_coherent() is called in the context of devm_action_release().
Jason pointed out that "arm_smmu_impl_probe() has mis-ordered the devres
callbacks if ops->device_remove() is going to be manually freeing things
that probe allocated":
https://lore.kernel.org/linux-iommu/20250407174408.GB1722458@nvidia.com/
In fact, tegra241_cmdqv_init_structures() only allocates memory resources
which means any failure that it generates would be similar to -ENOMEM, so
there is no point in having that "falling back to standard SMMU" routine,
as the standard SMMU would likely fail to allocate memory too.
Remove the unwind part in tegra241_cmdqv_init_structures(), and return a
proper error code to ask SMMU driver to call tegra241_cmdqv_remove() via
impl_ops->device_remove(). Then, drop tegra241_vintf_free_lvcmdq() since
devres will take care of that.
Fixes: 483e0bd8883a ("iommu/tegra241-cmdqv: Do not allocate vcmdq until dma_set_mask_and_coherent") Cc: stable@vger.kernel.org Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20250407201908.172225-1-nicolinc@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
iommu/mediatek: Fix NULL pointer deference in mtk_iommu_device_group
Currently, mtk_iommu calls during probe iommu_device_register before
the hw_list from driver data is initialized. Since iommu probing issue
fix, it leads to NULL pointer dereference in mtk_iommu_device_group when
hw_list is accessed with list_first_entry (not null safe).
So, change the call order to ensure iommu_device_register is called
after the driver data are initialized.
Fixes: 9e3a2a643653 ("iommu/mediatek: Adapt sharing and non-sharing pgtable case") Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path") Reviewed-by: Yong Wu <yong.wu@mediatek.com> Tested-by: Chen-Yu Tsai <wenst@chromium.org> # MT8183 Juniper, MT8186 Tentacruel Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com> Link: https://lore.kernel.org/r/20250403-fix-mtk-iommu-error-v2-1-fe8b18f8b0a8@collabora.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
Marek Szyprowski [Tue, 1 Apr 2025 20:27:31 +0000 (22:27 +0200)]
iommu/exynos: Fix suspend/resume with IDENTITY domain
Commit bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe
path") changed the sequence of probing the SYSMMU controller devices and
calls to arm_iommu_attach_device(), what results in resuming SYSMMU
controller earlier, when it is still set to IDENTITY mapping. Such change
revealed the bug in IDENTITY handling in the exynos-iommu driver. When
SYSMMU controller is set to IDENTITY mapping, data->domain is NULL, so
adjust checks in suspend & resume callbacks to handle this case
correctly.
Robin Murphy [Thu, 20 Mar 2025 14:41:27 +0000 (14:41 +0000)]
iommu/ipmmu-vmsa: Register in a sensible order
IPMMU registers almost-initialised instances, but misses assigning the
drvdata to make them fully functional, so initial calls back into
ipmmu_probe_device() are likely to fail unnecessarily. Reorder this to
work as it should, also pruning the long-out-of-date comment and adding
the missing sysfs cleanup on error for good measure.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/53be6667544de65a15415b699e38a9a965692e45.1742481687.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
Robin Murphy [Thu, 10 Apr 2025 11:23:48 +0000 (12:23 +0100)]
iommu: Clear iommu-dma ops on cleanup
If iommu_device_register() encounters an error, it can end up tearing
down already-configured groups and default domains, however this
currently still leaves devices hooked up to iommu-dma (and even
historically the behaviour in this area was at best inconsistent across
architectures/drivers...) Although in the case that an IOMMU is present
whose driver has failed to probe, users cannot necessarily expect DMA to
work anyway, it's still arguable that we should do our best to put
things back as if the IOMMU driver was never there at all, and certainly
the potential for crashing in iommu-dma itself is undesirable. Make sure
we clean up the dev->dma_iommu flag along with everything else.
Sean Christopherson [Thu, 10 Apr 2025 07:32:46 +0000 (15:32 +0800)]
iommu/vt-d: Wire up irq_ack() to irq_move_irq() for posted MSIs
Set the posted MSI irq_chip's irq_ack() hook to irq_move_irq() instead of
a dummy/empty callback so that posted MSIs process pending changes to the
IRQ's SMP affinity. Failure to honor a pending set-affinity results in
userspace being unable to change the effective affinity of the IRQ, as
IRQD_SETAFFINITY_PENDING is never cleared and so irq_set_affinity_locked()
always defers moving the IRQ.
The issue is most easily reproducible by setting /proc/irq/xx/smp_affinity
multiple times in quick succession, as only the first update is likely to
be handled in process context.
Fixes: ed1e48ea4370 ("iommu/vt-d: Enable posted mode for device MSIs") Cc: Robert Lippert <rlippert@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Reported-by: Wentao Yang <wentaoyang@google.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20250321194249.1217961-1-seanjc@google.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
report_iommu_fault() checks for an installed handler comparing the
corresponding field to NULL. It can (and could before) be called for a
domain with a different cookie type - IOMMU_COOKIE_DMA_IOVA, specifically.
Cookie is represented as a union so we may end up with a garbage value
treated there if this happens for a domain with another cookie type.
Formerly there were two exclusive cookie types in the union.
IOMMU_DOMAIN_SVA has a dedicated iommu_report_device_fault().
Call the fault handler only if the passed domain has a required cookie
type.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 6aa63a4ec947 ("iommu: Sort out domain user data") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20250408213342.285955-1-pchelkin@ispras.ru Signed-off-by: Joerg Roedel <jroedel@suse.de>
Merge tag 'drm-fixes-2025-04-11-1' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes, as expected it has a bit more in it than probably usual
for rc2. amdgpu/xe/i915 lead the way with fixes all over for a bunch
of other drivers. Nothing major stands out from what I can see.
tests:
- Clean up struct drm_display_mode in various places
i915:
- Fix scanline offset for LNL+ and BMG+
- Fix GVT unterminated-string-initialization build warning
- Fix DP rate limit when sink doesn't support TPS4
- Handle GDDR + ECC memory type detection
- Fix VRR parameter change check
- Fix fence not released on early probe errors
- Disable render power gating during live selftests
xe:
- Add another BMG PCI ID
- Fix UAFs on migration paths
- Fix shift-out-of-bounds access on TLB invalidation
- Ensure ccs_mode is correctly set on gt reset
- Extend some HW workarounds to Xe3
- Fix PM runtime get/put on sysfs files
- Fix u64 division on 32b
- Fix flickering due to missing L3 invalidations
- Fix missing error code return
amdgpu:
- MES FW version caching fixes
- Only use GTT as a fallback if we already have a backing store
- dma_buf fix
- IP discovery fix
- Replay and PSR with VRR fix
- DC FP fixes
- eDP fixes
- KIQ TLB invalidate fix
- Enable dmem groups support
- Allow pinning VRAM dma bufs if imports can do P2P
- Workload profile fixes
- Prevent possible division by 0 in fan handling
amdkfd:
- Queue reset fixes
imagination:
- Fix overflow
- Fix use-after-free
ivpu:
- Fix suspend/resume
nouveau:
- Do not deref dangling pointer
rockchip:
- Set DP/HDMI registers correctly
udmabuf:
- Fix overflow
virtgpu:
- Set reservation lock on dma-buf import
- Fix error handling in prepare_fb"
* tag 'drm-fixes-2025-04-11-1' of https://gitlab.freedesktop.org/drm/kernel: (58 commits)
drm/rockchip: dw_hdmi_qp: Fix io init for dw_hdmi_qp_rockchip_resume
drm/rockchip: vop2: Fix interface enable/mux setting of DP1 on rk3588
drm/amdgpu/mes12: optimize MES pipe FW version fetching
drm/amd/pm/smu11: Prevent division by zero
drm/amdgpu: cancel gfx idle work in device suspend for s0ix
drm/amd/display: pause the workload setting in dm
drm/amdgpu/pm/swsmu: implement pause workload profile
drm/amdgpu/pm: add workload profile pause helper
drm/i915/huc: Fix fence not released on early probe errors
drm/i915/vrr: Add vrr.vsync_{start, end} in vrr_params_changed
drm/tests: probe-helper: Fix drm_display_mode memory leak
drm/tests: modes: Fix drm_display_mode memory leak
drm/tests: modes: Fix drm_display_mode memory leak
drm/tests: cmdline: Fix drm_display_mode memory leak
drm/tests: modeset: Fix drm_display_mode memory leak
drm/tests: modeset: Fix drm_display_mode memory leak
drm/tests: helpers: Create kunit helper to destroy a drm_display_mode
drm/xe: Restore EIO errno return when GuC PC start fails
drm/xe: Invalidate L3 read-only cachelines for geometry streams too
drm/xe: avoid plain 64-bit division
...
Merge tag 'bcachefs-2025-04-10' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Mostly minor fixes.
Eric Biggers' crypto API conversion is included because of long
standing sporadic crashes - mostly, but not entirely syzbot - in the
crypto API code when calling poly1305, which have been nigh impossible
to reproduce and debug.
His rework deletes the code where we've seen the crashes, so either
it'll be a fix or we'll end up with backtraces we can debug. (Thanks
Eric!)"
* tag 'bcachefs-2025-04-10' of git://evilpiepirate.org/bcachefs:
bcachefs: Use sort_nonatomic() instead of sort()
bcachefs: Remove unnecessary softdep on xxhash
bcachefs: use library APIs for ChaCha20 and Poly1305
bcachefs: Fix duplicate "ro,read_only" in opts at startup
bcachefs: Fix UAF in bchfs_read()
bcachefs: Use cpu_to_le16 for dirent lengths
bcachefs: Fix type for parameter in journal_advance_devs_to_next_bucket
bcachefs: Fix escape sequence in prt_printf
perf libunwind arm64: Fix missing close parens in an if statement
While testing building with libunwind (using LIBUNWIND=1) in various
arches I noticed a problem on arm64, on an rpi5 system, a missing close
parens in a change related to dso__data_get_fd() usage, fix it.
Fixes: 5ac22c35aa8519f1 ("perf dso: Use lock annotations to fix asan deadlock") Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: https://lore.kernel.org/r/Z_Z3o8KvB2i5c6ab@x1 Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Dave Airlie [Thu, 10 Apr 2025 23:11:04 +0000 (09:11 +1000)]
Merge tag 'drm-xe-fixes-2025-04-10' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Add another BMG PCI ID
- Fix UAFs on migration paths
- Fix shift-out-of-bounds access on TLB invalidation
- Ensure ccs_mode is correctly set on gt reset
- Extend some HW workarounds to Xe3
- Fix PM runtime get/put on sysfs files
- Fix u64 division on 32b
- Fix flickering due to missing L3 invalidations
- Fix missing error code return
Merge tag 'irq-urgent-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc irqchip fixes from Ingo Molnar:
- Fix NULL pointer dereference crashes due to missing .chip_flags setup
in the sg2042-msi and irq-bcm2712-mip irqchip drivers
- Remove the davinci aintc irqchip driver's leftover header too
* tag 'irq-urgent-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-bcm2712-mip: Set EOI/ACK flags in msi_parent_ops
irqchip/sg2042-msi: Add missing chip flags
irqchip/davinci: Remove leftover header
Merge tag 'timers-urgent-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc timer fixes from Ingo Molnar:
- Fix missing ACCESS_PRIVATE() that triggered a Sparse warning
- Fix lockdep false positive in tick_freeze() on CONFIG_PREEMPT_RT=y
- Avoid <vdso/unaligned.h> macro's variable shadowing to address build
warning that triggers under W=2 builds
* tag 'timers-urgent-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
vdso: Address variable shadowing in macros
timekeeping: Add a lockdep override in tick_freeze()
hrtimer: Add missing ACCESS_PRIVATE() for hrtimer::function
Merge tag 'x86-urgent-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix CPU topology related regression that limited Xen PV guests to a
single CPU
- Fix ancient e820__register_nosave_regions() bugs that were causing
problems with kexec's artificial memory maps
- Fix an S4 hibernation crash caused by two missing ENDBR's that were
mistakenly removed in a recent commit
- Fix a resctrl serialization bug
- Fix early_printk documentation and comments
- Fix RSB bugs, combined with preparatory updates to better match the
code to vendor recommendations.
- Add RSB mitigation document
- Fix/update documentation
- Fix the erratum_1386_microcode[] table to be NULL terminated
* tag 'x86-urgent-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ibt: Fix hibernate
x86/cpu: Avoid running off the end of an AMD erratum table
Documentation/x86: Zap the subsection letters
Documentation/x86: Update the naming of CPU features for /proc/cpuinfo
x86/bugs: Add RSB mitigation document
x86/bugs: Don't fill RSB on context switch with eIBRS
x86/bugs: Don't fill RSB on VMEXIT with eIBRS+retpoline
x86/bugs: Fix RSB clearing in indirect_branch_prediction_barrier()
x86/bugs: Use SBPB in write_ibpb() if applicable
x86/bugs: Rename entry_ibpb() to write_ibpb()
x86/early_printk: Use 'mmio32' for consistency, fix comments
x86/resctrl: Fix rdtgroup_mkdir()'s unlocked use of kernfs_node::name
x86/e820: Fix handling of subpage regions when calculating nosave ranges in e820__register_nosave_regions()
x86/acpi: Don't limit CPUs to 1 for Xen PV guests due to disabled ACPI
Merge tag 'perf-urgent-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc perf events fixes from Ingo Molnar:
- Fix __free_event() corner case splat
- Fix false-positive uprobes related lockdep splat on
CONFIG_PREEMPT_RT=y kernels
- Fix a complicated perf sigtrap race that may result in hangs
* tag 'perf-urgent-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix hang while freeing sigtrap event
uprobes: Avoid false-positive lockdep splat on CONFIG_PREEMPT_RT=y in the ri_timer() uprobe timer callback, use raw_write_seqcount_*()
perf/core: Fix WARN_ON(!ctx) in __free_event() for partial init
Replace all usage of raw_spinlock_t in queue_stack_maps.c with
rqspinlock. This is a map type with a set of open syzbot reports
reproducing possible deadlocks. Prior attempt to fix the issues
was at [0], but was dropped in favor of this approach.
Make sure we return the -EBUSY error in case of possible deadlocks or
timeouts, just to make sure user space or BPF programs relying on the
error code to detect problems do not break.
With these changes, the map should be safe to access in any context,
including NMIs.
bpf: Use architecture provided res_smp_cond_load_acquire
In v2 of rqspinlock [0], we fixed potential problems with WFE usage in
arm64 to fallback to a version copied from Ankur's series [1]. This
logic was moved into arch-specific headers in v3 [2].
However, we missed using the arch-provided res_smp_cond_load_acquire
in commit ebababcd0372 ("rqspinlock: Hardcode cond_acquire loops for arm64")
due to a rebasing mistake between v2 and v3 of the rqspinlock series.
Fix the typo to fallback to the arm64 definition as we did in v2.
Leon Romanovsky [Thu, 10 Apr 2025 12:32:20 +0000 (15:32 +0300)]
RDMA/bnxt_re: Remove unusable nq variable
Remove nq variable from bnxt_re_create_srq() and bnxt_re_destroy_srq()
as it generates the following compilation warnings:
>> drivers/infiniband/hw/bnxt_re/ib_verbs.c:1777:24: warning: variable
'nq' set but not used [-Wunused-but-set-variable]
1777 | struct bnxt_qplib_nq *nq = NULL;
| ^
drivers/infiniband/hw/bnxt_re/ib_verbs.c:1828:24: warning: variable
'nq' set but not used [-Wunused-but-set-variable]
1828 | struct bnxt_qplib_nq *nq = NULL;
| ^
2 warnings generated.
Fixes: 6b395d31146a ("RDMA/bnxt_re: Fix budget handling of notification queue") Link: https://patch.msgid.link/r/8a4343e217d7d1c0a5a786b785c4ac57cb72a2a0.1744288299.git.leonro@nvidia.com Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202504091055.CzgXnk4C-lkp@intel.com/ Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Namhyung Kim [Thu, 10 Apr 2025 00:11:24 +0000 (17:11 -0700)]
tools headers: Update the x86 headers with the kernel sources
To pick up the changes in:
841326332bcb13ae x86/cpufeatures: Generate the <asm/cpufeaturemasks.h> header based on build config 440a65b7d25fb06f x86/mm: Enable AMD translation cache extensions 767ae437a32d6447 x86/mm: Add INVLPGB feature and Kconfig entry b4cc466b97359011 cpufreq/amd-pstate: Replace all AMD_CPPC_* macros with masks 98c7a713db91c5a9 x86/bugs: Add X86_BUG_SPECTRE_V2_USER 8f64eee70cdd3bb8 x86/bugs: Remove X86_FEATURE_USE_IBPB 8442df2b49ed9bcd x86/bugs: KVM: Add support for SRSO_MSR_FIX 70792aed14551e31 x86/cpufeatures: Add CPUID feature bit for Idle HLT intercept 968e9bc4cef87054 x86: move ZMM exclusion list into CPU feature flag c631a2de7ae48d50 perf/x86/intel: Ensure LBRs are disabled when a CPU is starting 38cc6495cdec18a4 x86/sev: Prevent GUEST_TSC_FREQ MSR interception for Secure TSC enabled guests 288bba2f4c8be1e1 x86/cpufeatures: Remove "AMD" from the comments to the AMD-specific leaf 877818802c3e970f x86/bugs: Add SRSO_USER_KERNEL_NO support 8ae3291f773befee x86/sev: Add full support for a segmented RMP table 0cbc0258415814c8 x86/sev: Add support for the RMPREAD instruction 7a470e826d7521be x86/cpufeatures: Free up unused feature bits
Namhyung Kim [Thu, 10 Apr 2025 00:11:23 +0000 (17:11 -0700)]
tools headers: Update the linux/unaligned.h copy with the kernel sources
To pick up the changes in:
3846699217798061 ALSA: rawmidi: Make tied_device=0 as default / unknown 7bb49d2e8b52adac ALSA: rawmidi: Bump protocol version to 2.0.5 b8fefed73a952a33 ALSA: rawmidi: Show substream activity in info ioctl bdf46443f350dd5d ALSA: rawmidi: Expose the tied device number in info ioctl
Addressing this perf tools build warning:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/sound/asound.h include/uapi/sound/asound.h
Please see tools/include/uapi/README for further details.
This is basically to support the new open_tree_attr syscall. But it
also needs to update asm-generic unistd.h header to get the new syscall
number. And arm64 unistd.h header was converted to use the generic
64-bit header.
Namhyung Kim [Thu, 10 Apr 2025 00:11:17 +0000 (17:11 -0700)]
tools headers: Update the socket headers with the kernel sources
To pick up the changes in:
64e844505bc08cde include: uapi: protocol number and packet structs for AGGFRAG in ESP 18912c520674ec4d tcp: devmem: don't write truncated dmabuf CMSGs to userspace
Namhyung Kim [Thu, 10 Apr 2025 00:11:16 +0000 (17:11 -0700)]
tools headers: Update the KVM headers with the kernel sources
To pick up the changes in:
af5366bea2cb9dfb KVM: x86: Drop the now unused KVM_X86_DISABLE_VALID_EXITS 915d2f0718a42ee0 KVM: Move KVM_REG_SIZE() definition to common uAPI header 5c17848134ab1ffb KVM: x86/xen: Restrict hypercall MSR to unofficial synthetic range 9364789567f9b492 KVM: x86: Add a VM type define for TDX fa662c9080732b1f KVM: SVM: Add Idle HLT intercept support 3adaee78306148da KVM: arm64: Allow userspace to change the implementation ID registers faf7714a47a25c62 KVM: arm64: nv: Allow userland to set VGIC maintenance IRQ c0000e58c74eed07 KVM: arm64: Introduce KVM_REG_ARM_VENDOR_HYP_BMAP_2 f83c41fb3dddbf47 KVM: arm64: Allow userspace to limit NV support to nVHE
* tag 'net-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
ethtool: cmis_cdb: Fix incorrect read / write length extension
selftests: netfilter: add test case for recent mismatch bug
nft_set_pipapo: fix incorrect avx2 match of 5th field octet
net: ppp: Add bound checking for skb data on ppp_sync_txmung
net: Fix null-ptr-deref by sock_lock_init_class_and_name() and rmmod.
ipv6: Align behavior across nexthops during path selection
net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY
net: phy: move phy_link_change() prior to mdio_bus_phy_may_suspend()
selftests/tc-testing: sfq: check that a derived limit of 1 is rejected
net_sched: sch_sfq: move the limit validation
net_sched: sch_sfq: use a temporary work area for validating configuration
net: libwx: handle page_pool_dev_alloc_pages error
selftests: mptcp: validate MPJoin HMacFailure counters
mptcp: only inc MPJoinAckHMacFailure for HMAC failures
rtnetlink: Fix bad unlock balance in do_setlink().
net: ethtool: Don't call .cleanup_data when prepare_data fails
tc: Ensure we have enough buffer space when sending filter netlink notifications
net: libwx: Fix the wrong Rx descriptor field
octeontx2-pf: qos: fix VF root node parent queue index
selftests: tls: check that disconnect does nothing
...
Merge tag 'nvme-6.15-2025-04-10' of git://git.infradead.org/nvme into block-6.15
Pull NVMe updates from Christoph:
"nvme updates for Linux 6.15
- nvmet fc/fcloop refcounting fixes (Daniel Wagner)
- fix missed namespace/ANA scans (Hannes Reinecke)
- fix a use after free in the new TCP netns support (Kuniyuki Iwashima)
- fix a NULL instead of false review in multipath (Uday Shankar)"
* tag 'nvme-6.15-2025-04-10' of git://git.infradead.org/nvme:
nvmet-fc: put ref when assoc->del_work is already scheduled
nvmet-fc: take tgtport reference only once
nvmet-fc: update tgtport ref per assoc
nvmet-fc: inline nvmet_fc_free_hostport
nvmet-fc: inline nvmet_fc_delete_assoc
nvmet-fcloop: add ref counting to lport
nvmet-fcloop: replace kref with refcount
nvmet-fcloop: swap list_add_tail arguments
nvme-tcp: fix use-after-free of netns by kernel TCP socket.
nvme: multipath: fix return value of nvme_available_path
nvme: re-read ANA log page after ns scan completes
nvme: requeue namespace scan on missed AENs
Jann Horn [Fri, 29 Nov 2024 20:20:53 +0000 (21:20 +0100)]
ext4: don't treat fhandle lookup of ea_inode as FS corruption
A file handle that userspace provides to open_by_handle_at() can
legitimately contain an outdated inode number that has since been reused
for another purpose - that's why the file handle also contains a generation
number.
But if the inode number has been reused for an ea_inode, check_igot_inode()
will notice, __ext4_iget() will go through ext4_error_inode(), and if the
inode was newly created, it will also be marked as bad by iget_failed().
This all happens before the point where the inode generation is checked.
ext4_error_inode() is supposed to only be used on filesystem corruption; it
should not be used when userspace just got unlucky with a stale file
handle. So when this happens, let __ext4_iget() just return an error.
Merge tag 'for-linus-6.15a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- A simple fix adding the module description of the Xenbus frontend
module
- A fix correcting the xen-acpi-processor Kconfig dependency for PVH
Dom0 support
- A fix for the Xen balloon driver when running as Xen Dom0 in PVH mode
- A fix for PVH Dom0 in order to avoid problems with CPU idle and
frequency drivers conflicting with Xen
* tag 'for-linus-6.15a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: disable CPU idle and frequency drivers for PVH dom0
x86/xen: fix balloon target initialization for PVH dom0
xen: Change xen-acpi-processor dom0 dependency
xenbus: add module description
Merge tag 'block-6.15-20250410' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Add a missing ublk selftest script, from test additions added last
week
- Two fixes for ublk error recovery and reissue
- Cleanup of ublk argument passing
* tag 'block-6.15-20250410' of git://git.kernel.dk/linux:
ublk: pass ublksrv_ctrl_cmd * instead of io_uring_cmd *
ublk: don't fail request for recovery & reissue in case of ubq->canceling
ublk: fix handling recovery & reissue in ublk_abort_queue()
selftests: ublk: fix test_stripe_04
Merge tag 'io_uring-6.15-20250410' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Reject zero sized legacy provided buffers upfront. No ill side
effects from this one, only really done to shut up a silly syzbot
test case.
- Fix for a regression in tag posting for registered files or buffers,
where the tag would be posted even when the registration failed.
- two minor zcrx cleanups for code added this merge window.
* tag 'io_uring-6.15-20250410' of git://git.kernel.dk/linux:
io_uring/kbuf: reject zero sized provided buffers
io_uring/zcrx: separate niov number from pages
io_uring/zcrx: put refill data into separate cache line
io_uring: don't post tag CQEs on file/buffer registration failure
Merge tag 'gpio-fixes-for-v6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix resource handling in gpio-tegra186
- fix wakeup source leaks in gpio-mpc8xxx and gpio-zynq
- fix minor issues with some GPIO OF quirks
- deprecate GPIOD_FLAGS_BIT_NONEXCLUSIVE and devm_gpiod_unhinge()
symbols and add a TODO task to track replacing them with a better
solution
* tag 'gpio-fixes-for-v6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: of: Move Atmel HSMCI quirk up out of the regulator comment
gpiolib: of: Fix the choice for Ingenic NAND quirk
gpio: zynq: Fix wakeup source leaks on device unbind
gpio: mpc8xxx: Fix wakeup source leaks on device unbind
gpio: TODO: track the removal of regulator-related workarounds
MAINTAINERS: add more keywords for the GPIO subsystem entry
gpio: deprecate devm_gpiod_unhinge()
gpio: deprecate the GPIOD_FLAGS_BIT_NONEXCLUSIVE flag
gpio: tegra186: fix resource handling in ACPI probe path
Merge tag 'mtd/fixes-for-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"Two important fixes: the build of the SPI NAND layer with old GCC
versions as well as the fix of the Qpic Makefile which was wrong in
the first place.
There are also two smaller fixes about a missing error and status
check"
* tag 'mtd/fixes-for-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: spinand: Fix build with gcc < 7.5
mtd: rawnand: Add status chack in r852_ready()
mtd: inftlcore: Add error check for inftl_read_oob()
mtd: nand: Drop explicit test for built-in CONFIG_SPI_QPIC_SNAND
The 'read_write_len_ext' field in 'struct ethtool_cmis_cdb_cmd_args'
stores the maximum number of bytes that can be read from or written to
the Local Payload (LPL) page in a single multi-byte access.
Cited commit started overwriting this field with the maximum number of
bytes that can be read from or written to the Extended Payload (LPL)
pages in a single multi-byte access. Transceiver modules that support
auto paging can advertise a number larger than 255 which is problematic
as 'read_write_len_ext' is a 'u8', resulting in the number getting
truncated and firmware flashing failing [1].
Fix by ignoring the maximum EPL access size as the kernel does not
currently support auto paging (even if the transceiver module does) and
will not try to read / write more than 128 bytes at once.
[1]
Transceiver module firmware flashing started for device enp177s0np0
Transceiver module firmware flashing in progress for device enp177s0np0
Progress: 0%
Transceiver module firmware flashing encountered an error for device enp177s0np0
Status message: Write FW block EPL command failed, LPL length is longer
than CDB read write length extension allows.
Fixes: 9a3b0d078bd8 ("net: ethtool: Add support for writing firmware blocks using EPL payload") Reported-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Closes: https://lore.kernel.org/netdev/20250402183123.321036-3-michael.chan@broadcom.com/ Tested-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/20250409112440.365672-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
An error message is already emitted by the driver core function
call_driver_probe() when the driver probe fails. Therefore, this
redundant probe error message is removed.
Kevin Hao [Thu, 10 Apr 2025 06:56:09 +0000 (14:56 +0800)]
spi: fsl-qspi: Fix double cleanup in probe error path
Commit 40369bfe717e ("spi: fsl-qspi: use devm function instead of driver
remove") introduced managed cleanup via fsl_qspi_cleanup(), but
incorrectly retain manual cleanup in two scenarios:
- On devm_add_action_or_reset() failure, the function automatically call
fsl_qspi_cleanup(). However, the current code still jumps to
err_destroy_mutex, repeating cleanup.
- After the fsl_qspi_cleanup() action is added successfully, there is no
need to manually perform the cleanup in the subsequent error path.
However, the current code still jumps to err_destroy_mutex on spi
controller failure, repeating cleanup.
Skip redundant manual cleanup calls to fix these issues.
Cc: stable@vger.kernel.org Fixes: 40369bfe717e ("spi: fsl-qspi: use devm function instead of driver remove") Signed-off-by: Kevin Hao <haokexin@gmail.com> Link: https://patch.msgid.link/20250410-spi-v1-1-56e867cc19cf@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
Paolo Abeni [Thu, 10 Apr 2025 11:13:35 +0000 (13:13 +0200)]
Merge tag 'nf-25-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains a Netfilter fix and improved test coverage:
1) Fix AVX2 matching in nft_pipapo, from Florian Westphal.
2) Extend existing test to improve coverage for the aforementioned bug,
also from Florian.
netfilter pull request 25-04-10
* tag 'nf-25-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: add test case for recent mismatch bug
nft_set_pipapo: fix incorrect avx2 match of 5th field octet
====================
selftests: netfilter: add test case for recent mismatch bug
Without 'nft_set_pipapo: fix incorrect avx2 match of 5th field octet"
this fails:
TEST: reported issues
Add two elements, flush, re-add 1s [ OK ]
net,mac with reload 0s [ OK ]
net,port,proto 3s [ OK ]
avx2 false match 0s [FAIL]
False match for fe80:dead:01fe:0a02:0b03:6007:8009:a001
Other tests do not detect the kernel bug as they only alter parts in
the /64 netmask.
nft_set_pipapo: fix incorrect avx2 match of 5th field octet
Given a set element like:
icmpv6 . dead:beef:00ff::1
The value of 'ff' is irrelevant, any address will be matched
as long as the other octets are the same.
This is because of too-early register clobbering:
ymm7 is reloaded with new packet data (pkt[9]) but it still holds data
of an earlier load that wasn't processed yet.
The existing tests in nft_concat_range.sh selftests do exercise this code
path, but do not trigger incorrect matching due to the network prefix
limitation.
net: ppp: Add bound checking for skb data on ppp_sync_txmung
Ensure we have enough data in linear buffer from skb before accessing
initial bytes. This prevents potential out-of-bounds accesses
when processing short packets.
When ppp_sync_txmung receives an incoming package with an empty
payload:
(remote) gef➤ p *(struct pppoe_hdr *) (skb->head + skb->network_header)
$18 = {
type = 0x1,
ver = 0x1,
code = 0x0,
sid = 0x2,
length = 0x0,
tag = 0xffff8880371cdb96
}
from the skb struct (trimmed)
tail = 0x16,
end = 0x140,
head = 0xffff88803346f400 "4",
data = 0xffff88803346f416 ":\377",
truesize = 0x380,
len = 0x0,
data_len = 0x0,
mac_len = 0xe,
hdr_len = 0x0,
Peng Jiang [Mon, 24 Mar 2025 11:12:30 +0000 (19:12 +0800)]
vdso: Address variable shadowing in macros
Compiling the kernel with gcc12.3 W=2 results in shadowing warnings:
warning: declaration of '__pptr' shadows a previous local [-Wshadow]
const struct { type x; } __packed *__pptr = (typeof(__pptr))(ptr);
note: in definition of macro '__put_unaligned_t'
__pptr->x = (val);
note: in expansion of macro '__get_unaligned_t'
__put_unaligned_t(type, __get_unaligned_t(type, src), dst);
__get_unaligned_t() and __put_unaligned_t() use a local variable named
'__pptr', which can lead to variable shadowing when these macros are used in
the same scope. This results in a -Wshadow warning during compilation.
To address this issue, rename the local variables within the macros to
ensure uniqueness.
projects / nvme.git / log