It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. All the SKBs have
been dequeued from the old queue, so it's safe to enqueue these
SKBs to a free queue, then free them after spin_unlock_irqrestore()
at once. Compile tested only.
Fixes: 7fe3b3abb5da ("rtlwifi: rtl8188ee: rtl8821ae: Fix a queue locking problem") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221207141411.46098-3-yangyingliang@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. All the SKBs have
been dequeued from the old queue, so it's safe to enqueue these
SKBs to a free queue, then free them after spin_unlock_irqrestore()
at once. Compile tested only.
Fixes: 5c99f04fec93 ("rtlwifi: rtl8723be: Update driver to match Realtek release of 06/28/14") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221207141411.46098-2-yangyingliang@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
In the expression "map[i].qid << 24" starts as u8, but is promoted to
"signed int", then sign-extended to type "unsigned long", which is not
intended. Cast to u32 to avoid the sign extension.
Fixes: 776ec4e77aa6 ("mt76: mt7915: rework debugfs queue info") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
SDIO may need addtional 511 bytes to align bus operation. If the tailroom
of this skb is not big enough, we would access invalid memory region.
For low level operation, increase skb size to keep valid memory access in
SDIO host.
[69.952] Allocated by task 854:
[69.952] kasan_save_stack+0x26/0x50
[69.952] kasan_set_track+0x25/0x30
[69.952] kasan_save_alloc_info+0x1b/0x30
[69.952] __kasan_kmalloc+0x87/0xa0
[69.952] __kmalloc_node_track_caller+0x63/0x150
[69.952] kmalloc_reserve+0x31/0xd0
[69.952] __alloc_skb+0xfc/0x2b0
[69.952] __mt76_mcu_msg_alloc+0xbf/0x230 [mt76]
[69.952] mt76_mcu_send_and_get_msg+0xab/0x110 [mt76]
[69.952] __mt76_mcu_send_firmware.cold+0x94/0x15d [mt76]
[69.952] mt76_connac_mcu_send_ram_firmware+0x415/0x54d [mt76_connac_lib]
[69.952] mt76_connac2_load_ram.cold+0x118/0x4bc [mt76_connac_lib]
[69.952] mt7921_run_firmware.cold+0x2e9/0x405 [mt7921_common]
[69.952] mt7921s_mcu_init+0x45/0x80 [mt7921s]
[69.953] mt7921_init_work+0xe1/0x2a0 [mt7921_common]
[69.953] process_one_work+0x7ee/0x1320
[69.953] worker_thread+0x53c/0x1240
[69.953] kthread+0x2b8/0x370
[69.953] ret_from_fork+0x1f/0x30
[69.953] The buggy address belongs to the object at ffff88811c9ce800
which belongs to the cache kmalloc-2k of size 2048
[69.953] The buggy address is located 0 bytes to the right of
2048-byte region [ffff88811c9ce800, ffff88811c9cf000)
[69.953] Memory state around the buggy address:
[69.953] ffff88811c9cef00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[69.953] ffff88811c9cef80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[69.953] >ffff88811c9cf000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[69.953] ^
[69.953] ffff88811c9cf080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[69.953] ffff88811c9cf100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Fixes: 764dee47e2c1 ("mt76: sdio: move common code in mt76_sdio module") Suggested-by: Lorenzo Bianconi <lorenzo@kernel.org> Tested-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add missing of_node_put() after of_reserved_mem_lookup()
Fixes: 99ad32a4ca3a ("mt76: mt7915: add support for MT7986") Signed-off-by: Wang Yufen <wangyufen@huawei.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
Make sure to copy the flags when a bio_integrity_payload is cloned.
Otherwise per-I/O properties such as IP checksum flag will not be
passed down to the HBA driver. Since the integrity buffer is owned by
the original bio, the BIP_BLOCK_INTEGRITY flag needs to be masked off
to avoid a double free in the completion path.
In the current code, io statistics are missing for cgroup when bio
was throttled by blk-throttle. Fix it by moving the unreaching code
to submit_bio_noacct_nocheck.
Fixes: 3f98c753717c ("block: don't check bio in blk_throtl_dispatch_work_fn") Signed-off-by: Jinke Han <hanjinke.666@bytedance.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230216032250.74230-1-hanjinke.666@bytedance.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
We support mixed merge for requests/bios with different fastfail
settings. When request fails, each time we only handle the portion
with same failfast setting, then bios with failfast can be failed
immediately, and bios without failfast can be retried.
The idea is pretty good, but the current implementation has several
defects:
1) initially RA bio doesn't set failfast, however bio merge code
doesn't consider this point, and just check its failfast setting for
deciding if mixed merge is required. Fix this issue by adding helper
of bio_failfast().
2) when merging bio to request front, if this request is mixed
merged, we have to sync request's faifast setting with 1st bio's
failfast. Fix it by calling blk_update_mixed_merge().
3) when merging bio to request back, if this request is mixed
merged, we have to mark the bio as failfast, because blk_update_request
simply updates request failfast with 1st bio's failfast. Fix
it by calling blk_update_mixed_merge().
Fixes one normal EXT4 READ IO failure issue, because it is observed
that the normal READ IO is merged with RA IO, and the mixed merged
request has different failfast setting with 1st bio's, so finally
the normal READ IO doesn't get retried.
Cc: Tejun Heo <tj@kernel.org> Fixes: 80a761fd33cf ("block: implement mixed merge of different failfast requests") Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230209125527.667004-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Relinquish fscache volume with mutex held. Otherwise if a new domain is
registered when the old domain with the same name gets removed from the
list but not relinquished yet, fscache may complain the collision.
PMK8350 is the first PMIC to require both HLOS and PBS registers for
PON to function properly (at least in theory, sm8350 sees no change).
The support for it on the driver side has been added long ago,
but it has never been wired up. Do so.
Currently, uring_cmd with UBLK_IO_FETCH_REQ or
UBLK_IO_COMMIT_AND_FETCH_REQ is always checked whether
userspace server has provided IO buffer even flag
UBLK_F_NEED_GET_DATA is configured.
This is a excessive check. If UBLK_F_NEED_GET_DATA is
configured, FETCH_RQ doesn't need to provide IO buffer;
COMMIT_AND_FETCH_REQ also doesn't need to do that if
the IO type is not READ.
Check ub_cmd->addr together with ublk_need_get_data()
and IO type in ublk_ch_uring_cmd().
With this fix, userspace server doesn't need to preserve
buffers for every ublk_io when flag UBLK_F_NEED_GET_DATA
is configured, in order to save memory.
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com> Fixes: c86019ff75c1 ("ublk_drv: add support for UBLK_IO_NEED_GET_DATA") Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230210141356.112321-1-xiaodong.liu@intel.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
When support for ECDSA keys was added, constraints for data & signature
sizes were never updated. This makes it impossible to use such keys via
keyctl API from userspace.
Update constraint on max_data_size to 64 bytes in order to support
SHA512-based signatures. Also update the signature length constraints
per ECDSA signature encoding described in RFC 5480.
Fixes: 299f561a6693 ("x509: Add support for parsing x509 certs with ECDSA keys") Signed-off-by: Denis Kenzior <denkenz@gmail.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some of Nano series processors will lead GP when accessing
PMC fixed counter. Meanwhile, their hardware support for PMC
has not announced externally. So exclude Nano CPUs from ZXC
by checking stepping information. This is an unambiguous way
to differentiate between ZXC and Nano CPUs.
Following are Nano and ZXC FMS information:
Nano FMS: Family=6, Model=F, Stepping=[0-A][C-D]
ZXC FMS: Family=6, Model=F, Stepping=E-F OR
Family=6, Model=0x19, Stepping=0-3
Fixes: 3a4ac121c2ca ("x86/perf: Add hardware performance events support for Zhaoxin CPU.") Reported-by: Arjan <8vvbbqzo567a@nospam.xutrox.com> Reported-by: Kevin Brace <kevinbrace@gmx.com> Signed-off-by: silviazhao <silviazhao-oc@zhaoxin.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=212389 Signed-off-by: Sasha Levin <sashal@kernel.org>
The perf time is from sched_clock_cpu(). The current PEBS code
unconditionally convert the TSC to native_sched_clock(). There is a
shift between the two clocks. If the TSC is stable, the shift is
consistent, __sched_clock_offset. If the TSC is unstable, the shift has
to be calculated at runtime.
This patch doesn't support the conversion when the TSC is unstable. The
TSC unstable case is a corner case and very unlikely to happen. If it
happens, the TSC in a PEBS record will be dropped and fall back to
perf_event_clock().
Fixes: 47a3aeb39e8d ("perf/x86/intel/pebs: Fix PEBS timestamps overwritten") Reported-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/all/CAM9d7cgWDVAq8-11RbJ2uGfwkKD6fA-OMwOKDrNUrU_=8MgEjg@mail.gmail.com/ Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 326587b84078 ("sched: fix goto retry in pick_next_task_rt()")
removed any path which could make pick_next_rt_entity() return NULL.
However, BUG_ON(!rt_se) in _pick_next_task_rt() (the only caller of
pick_next_rt_entity()) still checks the error condition, which can
never happen, since list_entry() never returns NULL.
Remove the BUG_ON check, and instead emit a warning in the only
possible error condition here: the queue being empty which should
never happen.
Fixes: 326587b84078 ("sched: fix goto retry in pick_next_task_rt()") Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Phil Auld <pauld@redhat.com> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20230128-list-entry-null-check-sched-v3-1-b1a71bd1ac6b@diag.uniroma1.it Signed-off-by: Sasha Levin <sashal@kernel.org>
`dasd_reserve_req` is allocated before `dasd_vol_info_req`, and it
also needs to be freed before the error returns, just like the other
cases in this function.
The memory region reserved by a previous commit (see fixes tag below)
overlaps with the SMEM and MPSS memory regions, causing error messages in
dmesg:
OF: reserved mem: OVERLAP DETECTED!
reserved@5000000 (0x0000000005000000--0x0000000007200000)
overlaps with smem_region@6a00000
(0x0000000006a00000--0x0000000006c00000)
This patch resolves both of these by splitting the previously reserved
memory region into two sections either side of the SMEM region and by
cutting off the second memory region to 0x7000000.
The vendor kernel uses RPM_SMD_XO_CLK_SRC clock as an CXO clock rather
than using the RPM_SMD_BB_CLK1 directly. Follow this example and switch
msm8996.dtsi to use RPM_SMD_XO_CLK_SRC clock instead of RPM_SMB_BB_CLK1.
Commit 88022d7201e96 ("blk-mq: don't handle failure in .get_budget")
remove BLK_STS_RESOURCE return value and we only check if we can get
the budget from .get_budget() now.
Correct stale comment that ".get_budget() returns BLK_STS_NO_RESOURCE"
to ".get_budget() fails to get the budget".
Fixes: 88022d7201e9 ("blk-mq: don't handle failure in .get_budget") Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit f906a6a0f4268 ("blk-mq: improve tag waiting setup for non-shared
tags") mark restart for unshared tags for improvement. At that time,
tags is only shared betweens queues and we can check if tags is shared
by test BLK_MQ_F_TAG_SHARED.
Afterwards, commit 32bc15afed04b ("blk-mq: Facilitate a shared sbitmap per
tagset") enabled tags share betweens hctxs inside a queue. We only
mark restart for shared hctxs inside a queue and may cause io hung if
there is no tag currently allocated by hctxs going to be marked restart.
Wait on sbitmap_queue instead of mark restart for shared hctxs case to
fix this.
Fixes: 32bc15afed04 ("blk-mq: Facilitate a shared sbitmap per tagset") Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
For shared queues case, we will only wait on bitmap_tags if we fail to get
driver tag. However, rq could be from breserved_tags, then two problems
will occur:
1. io hung if no tag is currently allocated from bitmap_tags.
2. unnecessary wakeup when tag is freed to bitmap_tags while no tag is
freed to breserved_tags.
Wait on the bitmap which rq from to fix this.
Fixes: f906a6a0f426 ("blk-mq: improve tag waiting setup for non-shared tags") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 97889f9ac24f8 ("blk-mq: remove synchronize_rcu() from
blk_mq_del_queue_tag_set()") remove handle of TAG_SHARED in restart,
then shared_hctx_restart counted for how many hardware queues are marked
for restart is removed too.
Remove the stale comment that we still count hardware queues need restart.
Fixes: 97889f9ac24f ("blk-mq: remove synchronize_rcu() from blk_mq_del_queue_tag_set()") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 1f5bd336b9150 ("blk-mq: add blk_mq_alloc_request_hctx") add
blk_mq_alloc_request_hctx to send commands to a specific queue. If
BLK_MQ_REQ_NOWAIT is not set in tag allocation, we may change to different
hctx after sleep and get tag from unexpected hctx. So BLK_MQ_REQ_NOWAIT
must be set in flags for blk_mq_alloc_request_hctx.
After commit 600c3b0cea784 ("blk-mq: open code __blk_mq_alloc_request in
blk_mq_alloc_request_hctx"), blk_mq_alloc_request_hctx return -EINVAL
if both BLK_MQ_REQ_NOWAIT and BLK_MQ_REQ_RESERVED are not set instead of
if BLK_MQ_REQ_NOWAIT is not set. So if BLK_MQ_REQ_NOWAIT is not set and
BLK_MQ_REQ_RESERVED is set, blk_mq_alloc_request_hctx could alloc tag
from unexpected hctx. I guess what we need here is that return -EINVAL
if either BLK_MQ_REQ_NOWAIT or BLK_MQ_REQ_RESERVED is not set.
Currently both BLK_MQ_REQ_NOWAIT and BLK_MQ_REQ_RESERVED will be set if
specific hctx is needed in nvme_auth_submit, nvmf_connect_io_queue
and nvmf_connect_admin_queue. Fix the potential BLK_MQ_REQ_NOWAIT missed
case in future.
Fixes: 600c3b0cea78 ("blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
The STM32MP13x Device Part Number (also named RPN in reference manual)
only uses the first 12 bits in OTP4, all the other bit are reserved and
they can be different of zero; they must be masked in NVMEM result, so
the number of bits must be defined in the nvmem cell description.
MT7986's watchdog embeds a reset controller and needs only the
mediatek,mt7986-wdt compatible string as the MT6589 one is there
for watchdogs that don't have any reset controller capability.
Fixes: 50137c150f5f ("arm64: dts: mediatek: add basic mt7986 support") Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: NÃcolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20221108033209.22751-4-allen-kh.cheng@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
MT8195's watchdog embeds a reset controller and needs only the
mediatek,mt8195-wdt compatible string as the MT6589 one is there
for watchdogs that don't have any reset controller capability.
Fixes: 37f2582883be ("arm64: dts: Add mediatek SoC mt8195 and evaluation board") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Co-developed-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com> Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com> Reviewed-by: NÃcolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20221108033209.22751-3-allen-kh.cheng@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
MT8186's watchdog embeds a reset controller and needs only the
mediatek,mt8186-wdt compatible string as the MT6589 one is there
for watchdogs that don't have any reset controller capability.
Fixes: 2e78620b1350 ("arm64: dts: Add MediaTek MT8186 dts and evaluation board and Makefile") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Co-developed-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com> Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com> Reviewed-by: NÃcolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20221108033209.22751-2-allen-kh.cheng@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
MT8186 features the ARM DynamIQ technology and combines both two
Cortex-A76 (big) and six Cortex-A55 (LITTLE) CPUs in one cluster:
fix the CPU map to reflect that.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Fixes: 2e78620b1350 ("arm64: dts: Add MediaTek MT8186 dts and evaluation board and Makefile") Link: https://lore.kernel.org/r/20230126103526.417039-4-angelogioacchino.delregno@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
MT8192 features the ARM DynamIQ technology and combines both four
Cortex-A76 (big) and four Cortex-A55 (LITTLE) CPUs in one cluster:
fix the CPU map to reflect that.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Fixes: 48489980e27e ("arm64: dts: Add Mediatek SoC MT8192 and evaluation board dts and Makefile") Link: https://lore.kernel.org/r/20230126103526.417039-3-angelogioacchino.delregno@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
MT8195 features the ARM DynamIQ technology and combines both four
Cortex-A78 (big) and four Cortex-A55 (LITTLE) CPUs in one cluster:
fix the CPU map to reflect that.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Fixes: 37f2582883be ("arm64: dts: Add mediatek SoC mt8195 and evaluation board") Link: https://lore.kernel.org/r/20230126103526.417039-2-angelogioacchino.delregno@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 180dccb0dba4f ("blk-mq: fix tag_get wait task can't be awakened")
mentioned that in case of shared tags, there could be just one real
active hctx(queue) because of lazy detection of tag idle. Then driver tag
allocation may wait forever on this real active hctx(queue) if wake_batch
is > hctx_max_depth where hctx_max_depth is available tags depth for the
actve hctx(queue). However, the condition wake_batch > hctx_max_depth is
not strong enough to avoid IO hung as the sbitmap_queue_wake_up will only
wake up one wait queue for each wake_batch even though there is only one
waiter in the woken wait queue. After this, there is only one tag to free
and wake_batch may not be reached anymore. Commit 180dccb0dba4f ("blk-mq:
fix tag_get wait task can't be awakened") methioned that driver tag
allocation may wait forever. Actually, the inactive hctx(queue) will be
truely idle after at most 30 seconds and will call blk_mq_tag_wakeup_all
to wake one waiter per wait queue to break the hung. But IO hung for 30
seconds is also not acceptable. Set batch size to small enough that depth
of the shared hctx(queue) is enough to wake up all of the queues like
sbq_calc_wake_batch do to fix this potential IO hung.
Although hctx_max_depth will be clamped to at least 4 while wake_batch
recalculation does not do the clamp, the wake_batch will be always
recalculated to 1 when hctx_max_depth <= 4.
Fixes: 180dccb0dba4 ("blk-mq: fix tag_get wait task can't be awakened") Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Link: https://lore.kernel.org/r/20230116205059.3821738-6-shikemeng@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
sbitmap suffers from code complexity, as demonstrated by recent fixes,
and eventual lost wake ups on nested I/O completion. The later happens,
from what I understand, due to the non-atomic nature of the updates to
wait_cnt, which needs to be subtracted and eventually reset when equal
to zero. This two step process can eventually miss an update when a
nested completion happens to interrupt the CPU in between the wait_cnt
updates. This is very hard to fix, as shown by the recent changes to
this code.
The code complexity arises mostly from the corner cases to avoid missed
wakes in this scenario. In addition, the handling of wake_batch
recalculation plus the synchronization with sbq_queue_wake_up is
non-trivial.
This patchset implements the idea originally proposed by Jan [1], which
removes the need for the two-step updates of wait_cnt. This is done by
tracking the number of completions and wakeups in always increasing,
per-bitmap counters. Instead of having to reset the wait_cnt when it
reaches zero, we simply keep counting, and attempt to wake up N threads
in a single wait queue whenever there is enough space for a batch.
Waking up less than batch_wake shouldn't be a problem, because we
haven't changed the conditions for wake up, and the existing batch
calculation guarantees at least enough remaining completions to wake up
a batch for each queue at any time.
Performance-wise, one should expect very similar performance to the
original algorithm for the case where there is no queueing. In both the
old algorithm and this implementation, the first thing is to check
ws_active, which bails out if there is no queueing to be managed. In the
new code, we took care to avoid accounting completions and wakeups when
there is no queueing, to not pay the cost of atomic operations
unnecessarily, since it doesn't skew the numbers.
For more interesting cases, where there is queueing, we need to take
into account the cross-communication of the atomic operations. I've
been benchmarking by running parallel fio jobs against a single hctx
nullb in different hardware queue depth scenarios, and verifying both
IOPS and queueing.
Each experiment was repeated 5 times on a 20-CPU box, with 20 parallel
jobs. fio was issuing fixed-size randwrites with qd=64 against nullb,
varying only the hardware queue length per test.
The following is a similar experiment, ran against a nullb with a single
bitmap shared by 20 hctx spread across 2 NUMA nodes. This has 40
parallel fio jobs operating on the same device
It has also survived blktests and a 12h-stress run against nullb. I also
ran the code against nvme and a scsi SSD, and I didn't observe
performance regression in those. If there are other tests you think I
should run, please let me know and I will follow up with results.
Commit fbb564a557809 ("lib/sbitmap: Fix invalid loop in
__sbitmap_queue_get_batch()") mentioned that "Checking free bits when
setting the target bits. Otherwise, it may reuse the busying bits."
This commit add check to make sure all masked bits in word before
cmpxchg is zero. Then the existing check after cmpxchg to check any
zero bit is existing in masked bits in word is redundant.
Actually, old value of word before cmpxchg is stored in val and we
will filter out busy bits in val by "(get_mask & ~val)" after cmpxchg.
So we will not reuse busy bits methioned in commit fbb564a557809
("lib/sbitmap: Fix invalid loop in __sbitmap_queue_get_batch()"). Revert
new-added check to remove redundant check.
Fixes: fbb564a55780 ("lib/sbitmap: Fix invalid loop in __sbitmap_queue_get_batch()") Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Link: https://lore.kernel.org/r/20230116205059.3821738-3-shikemeng@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
If any ubq daemon is unprivileged, the ublk char device is allowed
for unprivileged user actually, and we can't trust the current user,
so not probe partitions.
Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver") Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230106041711.914434-3-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
The property named in the schema is 'enable-gpios', not 'enable-gpio'.
This makes no difference at runtime, because the regulator is marked as
always-on, but it breaks validation.
For proper warm (re)boot from SD card the BPI-M5 board requires TFLASH_VDD_EN
and VDDIO_C pins to be switched to high impedance mode. This can be achieved
using OPEN_DRAIN instead of ACTIVE_HIGH to leave the GPIO pins in input mode
and retain high state (pin has the pull-up).
This change is inspired by meson-sm1-odroid.dtsi where OPEN_DRAIN has been
used to resolve similar problems with the Odroid C4 board (TF_IO in the C4
dts is the equivalent regulator).
Fixes: 976e920183e4 ("arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts") Suggested-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230127142221.3718184-2-christianshewitt@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The board used to originally introduce the Beacon Embedded RZ/G2[M/N/H]
boards had a GPIO expander with address 20, but this was changed when
the final board went to production.
The production boards changed both the part itself and the address.
With the incorrect address, the LCD cannot come up. If the LCD fails,
the rcar-du driver fails to come up, and that also breaks HDMI.
Pre-release board were not shipped to the general public, so it should
be safe to push this as a fix. Anyone with a production board would
have video fail due to this GPIO expander change.
91d2a812dfb9 ("locking/rwsem: Make handoff writer optimistically spin on owner")
... assumes that when the owner field is changed to NULL, the lock will
become free soon. But commit:
48dfb5d2560d ("locking/rwsem: Disable preemption while trying for rwsem lock")
... disabled preemption when acquiring rwsem for write.
However, preemption has not yet been disabled when acquiring a read lock
on a rwsem. So a reader can add a RWSEM_READER_BIAS to count without
setting owner to signal a reader, got preempted out by a RT task which
then spins in the writer slowpath as owner remains NULL leading to live lock.
One easy way to fix this problem is to disable preemption at all the
down_read*() and up_read() code paths as implemented in this patch.
Fixes: 91d2a812dfb9 ("locking/rwsem: Make handoff writer optimistically spin on owner") Reported-by: Mukesh Ojha <quic_mojha@quicinc.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20230126003628.365092-3-longman@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes:
scpi: sensors:compatible: 'oneOf' conditional failed, one must be fixed:
['amlogic,meson-gxbb-scpi-sensors'] is too short
'arm,scpi-sensors' was expected
The function call ida_simple_get maybe fail,we should deal with it.
And if ida_simple_get success ,it need to call ida_simple_remove also.
BTW,devm_kasprintf can handle id is zero for consistency.
The WKUP_PADCONFIG register region in J7200 has multiple non-addressable
regions, split the existing wkup_pmx region as follows to avoid the
non-addressable regions and include all valid WKUP_PADCONFIG registers.
Also update references to old nodes with new ones.
The prototype does not match the definition, as gcc-13 points
out:
arch/arm/mach-s3c/s3c64xx.c:169:13: error: conflicting types for 's3c64xx_set_timer_source' due to enum/integer mismatch; have 'void(unsigned int, unsigned int)' [-Werror=enum-int-mismatch]
169 | void __init s3c64xx_set_timer_source(unsigned int event, unsigned int source)
| ^~~~~~~~~~~~~~~~~~~~~~~~
In file included from arch/arm/mach-s3c/s3c64xx.c:50:
arch/arm/mach-s3c/s3c64xx.h:62:20: note: previous declaration of 's3c64xx_set_timer_source' with type 'void(enum s3c64xx_timer_mode, enum s3c64xx_timer_mode)'
62 | extern void __init s3c64xx_set_timer_source(enum s3c64xx_timer_mode event,
| ^~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 4280506ac9bb ("ARM: SAMSUNG: Move all platforms to new clocksource driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230118090224.2162863-1-arnd@kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Amlogic G12A devices experience CPU stalls and random board wedges when
the system idles and CPU cores clock down to lower opp points. Recent
vendor kernels include a change to remove 100-250MHz and other distro
sources also remove the 500/667MHz points. Unless all 100-667Mhz opps
are removed or the CPU governor forced to performance stalls are still
observed, so let's remove them to improve stability and uptime.
Fixes: b190056fa9ee ("arm64: dts: meson-g12a: add cpus OPP table") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Link: https://lore.kernel.org/r/20230119053031.21400-1-christianshewitt@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Current PCIe QMP PHY output name were changed in ("arm64: dts: qcom: Fix
IPQ8074 PCIe PHY nodes") however it did not account for the fact that GCC
driver is relying on the old names to match them as they are being used as
the parent for the gcc_pcie0_pipe_clk and gcc_pcie1_pipe_clk.
This broke parenting as GCC could not find the parent clock, so fix it by
changing to the names that driver is expecting.
IPQ8074 comes in 2 silicon versions:
* v1 with 2x Gen2 PCIe ports and QMP PHY-s
* v2 with 1x Gen3 and 1x Gen2 PCIe ports and QMP PHY-s
v2 is the final and production version that is actually supported by the
kernel, however it looks like PCIe related nodes were added for the v1 SoC.
Finish the PCIe fixup by using the correct compatible, adding missing ATU
register space, declaring max-link-speed, use correct ranges, add missing
clocks and resets.
It seems that clock-output-names for the USB3 QMP PHY-s where set without
actually checking what is the GCC clock driver expecting, so clock core
could never actually find the parents for usb0_pipe_clk_src and
usb1_pipe_clk_src clocks in the GCC driver.
So, correct the names to be what the driver expects so that parenting
works.
Before:
gcc_usb0_pipe_clk_src 0 0 0 125000000 0 0 50000 Y
gcc_usb1_pipe_clk_src 0 0 0 125000000 0 0 50000 Y
After:
usb3phy_0_cc_pipe_clk 1 1 0 125000000 0 0 50000 Y
usb0_pipe_clk_src 1 1 0 125000000 0 0 50000 Y
gcc_usb0_pipe_clk 1 1 0 125000000 0 0 50000 Y
usb3phy_1_cc_pipe_clk 1 1 0 125000000 0 0 50000 Y
usb1_pipe_clk_src 1 1 0 125000000 0 0 50000 Y
gcc_usb1_pipe_clk 1 1 0 125000000 0 0 50000 Y
Fixes: 5e09bc51d07b ("arm64: dts: ipq8074: enable USB support") Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230108130440.670181-2-robimarko@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes: 976d321f32dc ("arm64: dts: qcom: msm8992: Make the DT an overlay on top of 8994") Signed-off-by: Petr Vorel <petr.vorel@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221226185440.440968-3-pevik@seznam.cz Signed-off-by: Sasha Levin <sashal@kernel.org>
Original google firmware reports 12 MiB:
[ 0.000000] cma: Found cont_splash_mem@0, memory base 0x0000000003400000, size 12 MiB, limit 0xffffffffffffffff
which is actually 12*1024*1024 = 0xc00000.
This matches the aosp source [1]:
&cont_splash_mem {
reg = <0 0x03400000 0 0xc00000>;
};
Fixes: 3cb6a271f4b0 ("arm64: dts: qcom: msm8992-bullhead: Fix cont_splash_mem mapping") Fixes: 976d321f32dc ("arm64: dts: qcom: msm8992: Make the DT an overlay on top of 8994")
[1] https://android.googlesource.com/kernel/msm.git/+/android-7.0.0_r0.17/arch/arm64/boot/dts/lge/msm8992-bullhead.dtsi#141
Signed-off-by: Petr Vorel <petr.vorel@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221226185440.440968-2-pevik@seznam.cz Signed-off-by: Sasha Levin <sashal@kernel.org>
vmlinux.o: warning: objtool: intel_idle_irq+0x10c: call to trace_hardirqs_off() leaves .noinstr.text section
As per commit 32d4fd5751ea ("cpuidle,intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE"):
"must not have tracing in idle functions"
Clearly people can't read and tinker along until splat dissapears.
This straight up reverts commit d295ad34f236 ("intel_idle: Fix false
positive RCU splats due to incorrect hardirqs state").
It doesn't re-introduce the problem because preceding patches fixed it
properly.
Fixes: d295ad34f236 ("intel_idle: Fix false positive RCU splats due to incorrect hardirqs state") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230112195540.434302128@infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org>
Node names should be generic and use hyphens instead of underscores to
not cause warnings. Also nodes without a reg property should not have a
unit-address. Change the scpi_dvfs node to use clock-controller as node
name without a unit address (since it does not have a reg property).
Fixes: 70db166a2baa ("ARM64: dts: meson-gxbb: Add SCPI with cpufreq & sensors Nodes") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230111211350.1461860-7-martin.blumenstingl@googlemail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Documentation/devicetree/bindings/net/ethernet-phy.yaml defines that the
node name for Ethernet PHYs should match the following pattern:
^ethernet-phy(@[a-f0-9]+)?$
Replace the underscore with a hyphen to adhere to this binding.
Fixes: 280c17df8fbf ("arm64: dts: meson: g12a: add mdio multiplexer") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230111211350.1461860-6-martin.blumenstingl@googlemail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Unit addresses should be written using lower-case hex characters. Use
wifi_mac@c to fix a yaml schema validation error once the eFuse
dt-bindings have been converted to a yaml schema:
efuse: Unevaluated properties are not allowed ('wifi_mac@C' was
unexpected)
Also node names should use hyphens instead of underscores as the latter
can also cause warnings.
Fixes: abfaae24ecf3 ("arm64: dts: meson-gxl: add support for JetHub H1") Acked-by: Vyacheslav Bocharov <adeep@lexina.in> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230111211350.1461860-2-martin.blumenstingl@googlemail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Running GCC_USB30_*_MASTER_CLK at 200MHz requires CX at nominal level,
not doing so results in occasional lockups. This was previously hidden
by the fact that the display stack incorrectly voted for CX (instead of
MMCX).
Section 5.2.12.12 Processor Local x2APIC Structure in the ACPI v6.5
spec mandates that both "enabled" and "online capable" Local APIC Flags
should be used to determine if the processor is usable or not.
However, Linux doesn't use the "online capable" flag for x2APIC to
determine if the processor is usable. As a result, cpu_possible_mask has
incorrect value and results in more memory getting allocated for per_cpu
variables than it is going to be used.
Make sure Linux parses both "enabled" and "online capable" flags for
x2APIC to correctly determine if the processor is usable.
Fixes: aa06e20f1be6 ("x86/ACPI: Don't add CPUs that are not online capable") Reported-by: Leo Duran <leo.duran@amd.com> Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20230105041059.39366-1-kvijayab@amd.com Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / users / jedix / linux-maple.git / log