Sujith Sankar [Tue, 13 Oct 2015 10:04:02 +0000 (15:34 +0530)]
enic: do hang reset only in case of tx timeout
The current code invokes hang reset in case of error interrupt. We should
hang reset only in case of tx timeout. This because of the way hang reset
is implemented in firmware. Hang reset takes more firmware resources than
soft reset. Adaptor does not generate error interrupt in case of tx
timeout.
Hang reset only in case of tx timeout, in .ndo_tx_timeout. Do soft reset
otherwise. Introduce deferred work, enic_tx_hang_reset, to do hang reset.
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sujith Sankar [Tue, 13 Oct 2015 10:02:31 +0000 (15:32 +0530)]
enic: handle spurious error interrupt
Some of the enic adaptors are know to generate spurious interrupts. When
error interrupt is generated, driver just resets the device. This patch
resets the device only when an error is occurred.
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/built-in.o: In function `.vnic_wq_devcmd2_alloc':
(.text+0x49fe40): multiple definition of `.vnic_wq_devcmd2_alloc'
drivers/scsi/built-in.o:(.text+0xb4318): first defined here
drivers/net/built-in.o:(.opd+0x2af00): multiple definition of `vnic_wq_devcmd2_alloc'
drivers/scsi/built-in.o:(.opd+0xad70): first defined here
drivers/net/built-in.o: In function `.vnic_wq_init_start':
(.text+0x49f9c0): multiple definition of `.vnic_wq_init_start'
drivers/scsi/built-in.o:(.text+0xb3b58): first defined here
drivers/net/built-in.o:(.opd+0x2ae88): multiple definition of `vnic_wq_init_start'
drivers/scsi/built-in.o:(.opd+0xace0): first defined here
Rename these to 'enic_*' to avoid the conflict with the functiosn of
the same name in the snic scsi driver.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Sujith Sankar [Tue, 13 Oct 2015 09:55:27 +0000 (15:25 +0530)]
enic: add devcmd2
devcmd is an interface for driver to communicate with fw/adaptor. It
involves writing data to hardware registers and waiting for the result.
This mechanism does not scale well. The queuing of "no wait" devcmds is
done in firmware memory rather than on the host. Firmware memory is a
rather more scarce and valuable resource than host memory. A devcmd storm
from one vf can disrupt the service on other pf/vf. The lack of flow
control allows for possible denial of server from one VM to another.
Devcmd2 uses work queue to post the devcmds, just like tx work queue. This
allows better flow control.
Initialize devcmd2, if fails we fall back to devcmd1.
Also change the driver version.
Signed-off-by: N V V Satyanarayana Reddy <nalreddy@cisco.com> Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sujith Sankar [Tue, 13 Oct 2015 09:49:59 +0000 (15:19 +0530)]
enic: add devcmd2 resources
Add devcmd resources to vnic_res_type. Add data types used by devcmd.
Signed-off-by: N V V Satyanarayana Reddy <nalreddy@cisco.com> Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sujith Sankar [Tue, 13 Oct 2015 09:47:36 +0000 (15:17 +0530)]
enic: use netdev_<foo> or dev_<foo> instead of pr_<foo>
pr_info does not give any details about the interface involved. This patch
uses netdev_info for printing the message. Use dev_info where netdev is not
ready.
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sujith Sankar [Tue, 13 Oct 2015 09:46:19 +0000 (15:16 +0530)]
enic: move struct definition from .c to .h file
Some of the structure definitions are in .c file to make them private to
that file. This patch moves the struct definition to .h file, So that their
definitions are accessible from other files.
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sujith Sankar [Tue, 13 Oct 2015 09:44:45 +0000 (15:14 +0530)]
enic: allow adaptive coalesce setting for msi/legacy intr
* Allow setting of adaptive coalescing setting for all types of interrupt.
* In msi & legacy intr, we use single interrupt for rx & tx. In this case
tx_coalesce_usecs is invalid. We should use only rx_coalesce_usecs.
Do not display tx_coal values for msi/intx. And do not allow user to set
this as well.
* Driver supports only tx/rx_coalesce_usec and adaptive coalesce settings.
For other values, driver does not return error. So ethtool succeeds for
unsupported values. Introduce enic_coalesce_valid() function to validate
the coalescing values.
* If user requests for coalesce value greater than what adaptor supports,
driver uses the max value. We should at least log this.
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sujith Sankar [Tue, 13 Oct 2015 09:42:52 +0000 (15:12 +0530)]
enic: add adaptive coalescing intr for intx and msi poll
Adaptive interrupt coalescing is available for msix. This patch adds the support
for msi poll. Interface for adaptive interrupt coalescing is already added in
driver. We just did not enable it for legacy intr & msi.
enic_calc_int_moderation() & enic_set_int_moderation() are defined as static
after enic_poll. Since enic_poll needs it, move both of these function
definitions above enic_poll. No change in functionality.
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sujith Sankar [Tue, 13 Oct 2015 09:32:18 +0000 (15:02 +0530)]
enic: fix issues in enic_poll
In enic_poll, we clean tx and rx queues, when low latency busy socket polling
is happening, enic_poll will only clean tx queue. After cleaning tx, it should
return total budget for re-poll.
There is a small window between vnic_intr_unmask() and enic_poll_unlock_napi().
In this window if an irq occurs and napi is scheduled on different cpu, it tries
to acquire enic_poll_lock_napi() and fails. Unlock napi_poll before unmasking
the interrupt.
v2:
Do not change tx wonk done behaviour. Consider only rx work done for completing
napi.
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sujith Sankar [Tue, 13 Oct 2015 09:27:34 +0000 (14:57 +0530)]
enic: use atomic_t instead of spin_lock in busy poll
We use spinlock to access a single flag. We can avoid spin_locks by using
atomic variable and atomic_cmpxchg(). Use atomic_cmpxchg to set the flag
for idle to poll. And a simple atomic_set to unlock (set idle from poll).
In napi poll, if gro is enabled, we call napi_gro_receive() to deliver the
packets. Before we call napi_complete(), i.e while re-polling, if low
latency busy poll is called, we use netif_receive_skb() to deliver the packets.
At this point if there are some skb's held in GRO, busy poll could deliver the
packets out of order. So we call napi_gro_flush() to flush skbs before we
move the napi poll to idle.
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sujith Sankar [Tue, 13 Oct 2015 09:21:06 +0000 (14:51 +0530)]
drivers/net: remove all references to obsolete Ethernet-HOWTO
This howto made sense in the 1990s when users had to manually configure
ISA cards with jumpers or vendor utilities, but with the implementation
of PCI it became increasingly less and less relevant, to the point where
it has been well over a decade since I last updated it. And there is
no value in anyone else taking over updating it either.
However the references to it continue to spread as boiler plate text
from one Kconfig file into the next. We are not doing end users any
favours by pointing them at this old document, so lets kill it with
fire, once and for all, to hopefully stop any further spread.
No code is changed in this commit, just Kconfig help text.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kalesh AP [Mon, 12 Oct 2015 07:47:21 +0000 (03:47 -0400)]
be2net: remove vlan promisc capability from VF's profile descriptors
The commit 435452aa8847 ("Prevent VFs from enabling VLAN promiscuous mode")
fixed the PF driver to not include the VLAN promisc capability while
provisioning the interface for a VF. But the fix did not remove this
capability from the profile descriptor of the VF. This causes the VF
driver to request this capability when it tries to create it's interface
at probe time. This could potentailly cause the VF probe to fail if the
FW enforces strict checking of the flags based on what was provisoned
by the PF. This strict checking is not being done by FW currently but
will be fixed in a future version. This patch fixes this issue by updating
the VF's profile descriptor so that they match the interface capability
flags provisioned by the PF.
Fixes: 435452aa8847 ("Prevent VFs from enabling VLAN promiscuous mode") Signed-off-by: Kalesh AP <kalesh.purayil@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Suresh Reddy <suresh.reddy@avagotech.com>
Somnath Kotur [Mon, 12 Oct 2015 07:47:20 +0000 (03:47 -0400)]
be2net: set pci_func_num while issuing GET_PROFILE_CONFIG cmd
The FW requires the pf_num field in the cmd hdr to be set for it to return
the specific function's descriptors in the GET_PROFILE_CONFIG cmd. If not
set, the FW returns the descriptors of all the functions on the device.
If the first descriptor is not what is being queried for, the driver will
read wrong data. This patch fixes this issue by using the GET_CNTL_ATTRIB
cmd to query the real pci_func_num of a function and then uses it in the
GET_PROFILE_CONFIG cmd.
Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Suresh Reddy <suresh.reddy@avagotech.com>
Suresh Reddy [Mon, 12 Oct 2015 07:47:19 +0000 (03:47 -0400)]
be2net: pad skb to meet minimum TX pkt size in BE3
On BE3 chips in SRIOV configs, the TX path stalls when a packet less
than 32B is received from the host. A workaround to pad such packets
already exists for the Skyhawk and Lancer chips. Use the same workaround
for BE3 chips too.
Signed-off-by: Suresh Reddy <suresh.reddy@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Suresh Reddy [Mon, 12 Oct 2015 07:47:18 +0000 (03:47 -0400)]
be2net: release mcc-lock in a failure case in be_cmd_notify_wait()
The mcc/mbox lock is not being released when be_cmd_copy() returns
an error.
Signed-off-by: Suresh Reddy <suresh.reddy@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kalesh AP [Mon, 12 Oct 2015 07:47:17 +0000 (03:47 -0400)]
be2net: fix BE3-R FW download compatibility check
In the BE3 FW image, unlike Skyhawk's, the "asic_type_rev" field doesn't
track the asic_rev of chip it is compatible with. When asic_type_rev
is 0 the image is compatible only with pre-BE3-R chips (asic_rev < 0x10).
Fix the current compatibility check to take care of this.
We hit this issue when we try to flash old BE3 images (used prior to the
release of BE3-R) on pre-BE3-R adapters.
Fixes: a6e6ff6eee12f3e ("be2net: simplify UFI compatibility checking") Signed-off-by: Kalesh AP <kalesh.purayil@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Suresh Reddy <suresh.reddy@avagotech.com>
Ivan Vecera [Fri, 14 Aug 2015 20:30:01 +0000 (22:30 +0200)]
be2net: avoid vxlan offloading on multichannel configs
VxLAN offloading is not functional if the NIC is running in multichannel
mode (UMC, FLEX-10, VNIC...). Enabling this additionally kills whole
connectivity through the NIC and the device needs to be down and up to
restore it. The firmware should take care about it and does not allow
the conversion of interface to tunnel type (be_cmd_manage_iface) or should
support VxLAN offloading if multichannel config is enabled.
I have tested this on the latest available firmware (10.6.144.21).
Result:
[root@sm-04 ~]# ip link set enp5s0f0 up[root@sm-04 ~]# ip addr add 172.30.10.50/24 dev enp5s0f0
[root@sm-04 ~]# ping -c 3 172.30.10.254PING 172.30.10.254 (172.30.10.254) 56(84) bytes of data.
64 bytes from 172.30.10.254: icmp_seq=1 ttl=64 time=0.317 ms
64 bytes from 172.30.10.254: icmp_seq=2 ttl=64 time=0.187 ms
64 bytes from 172.30.10.254: icmp_seq=3 ttl=64 time=0.188 ms
--- 172.30.10.254 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2000ms
rtt min/avg/max/mdev = 0.187/0.230/0.317/0.063 ms
[root@sm-04 ~]# ip link add link enp5s0f0 vxlan10 type vxlan id 10 remote 172.30.10.60 dstport 4789
[root@sm-04 ~]# ip link set vxlan10 up
[ 7900.442811] be2net 0000:05:00.0: Enabled VxLAN offloads for UDP port 4789
[ 7900.455722] be2net 0000:05:00.1: Enabled VxLAN offloads for UDP port 4789
[ 7900.468635] be2net 0000:05:00.2: Enabled VxLAN offloads for UDP port 4789
[ 7900.481553] be2net 0000:05:00.3: Enabled VxLAN offloads for UDP port 4789
[root@sm-04 ~]# ping -c 3 172.30.10.254
PING 172.30.10.254 (172.30.10.254) 56(84) bytes of data.
[root@sm-04 ~]# ip link set vxlan10 down
[ 7959.434093] be2net 0000:05:00.0: Disabled VxLAN offloads for UDP port 4789
[ 7959.444792] be2net 0000:05:00.1: Disabled VxLAN offloads for UDP port 4789
[ 7959.455592] be2net 0000:05:00.2: Disabled VxLAN offloads for UDP port 4789
[ 7959.466416] be2net 0000:05:00.3: Disabled VxLAN offloads for UDP port 4789
[root@sm-04 ~]# ip link del vxlan10
[root@sm-04 ~]# ping -c 3 172.30.10.254
PING 172.30.10.254 (172.30.10.254) 56(84) bytes of data.
[root@sm-04 ~]# ip link set enp5s0f0 down
[root@sm-04 ~]# ip link set enp5s0f0 up
[ 8071.019003] be2net 0000:05:00.0 enp5s0f0: Link is Up
[root@sm-04 ~]# ping -c 3 172.30.10.254
PING 172.30.10.254 (172.30.10.254) 56(84) bytes of data.
64 bytes from 172.30.10.254: icmp_seq=1 ttl=64 time=0.318 ms
64 bytes from 172.30.10.254: icmp_seq=2 ttl=64 time=0.196 ms
64 bytes from 172.30.10.254: icmp_seq=3 ttl=64 time=0.194 ms
--- 172.30.10.254 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2000ms
rtt min/avg/max/mdev = 0.194/0.236/0.318/0.057 ms
Cc: Sathya Perla <sathya.perla@avagotech.com> Cc: Ajit Khaparde <ajit.khaparde@avagotech.com> Cc: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@avagotech.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Ajit Khaparde <ajit.khaparde@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kalesh AP [Wed, 5 Aug 2015 07:27:50 +0000 (03:27 -0400)]
be2net: protect eqo->affinity_mask from getting freed twice
There are paths in the driver such as an unrecoverable error (UE) detection
followed by a driver unload wherein be_clear() is invoked twice.
Individual data structures are reset so that they are not cleaned/freed
twice. This patch does the same for eqo->affinity_mask. It is freed only
if EQs haven't yet been destroyed. This fixes a possible crash when
affinity_mask is freed twice.
Signed-off-by: Kalesh AP <kalesh.purayil@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kalesh AP [Wed, 5 Aug 2015 07:27:49 +0000 (03:27 -0400)]
be2net: post buffers before destroying RXQs in Lancer
An RX stall issue was seen on Lancer adapters, when RXQs are destroyed
while they are in an "out of buffer" state. This patch fixes this issue
by posting 64 buffers to each RXQ before destroying them in the close path.
This is done after ensuring that no more new packets are selected for
transfer to the RXQs by disabling interface filters.
Signed-off-by: Kalesh AP <kalesh.purayil@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kalesh AP [Wed, 5 Aug 2015 07:27:48 +0000 (03:27 -0400)]
be2net: enable IFACE filters only after creating RXQs
HW issues were observed on Lancer adapters if IFACE filters
(flags, mac addrs etc) are enabled *before* creating RXQs. This patch
changes the driver design by enabling filters in be_open() --
instead of be_setup() -- after RXQs are created and buffers posted.
Two new wrapper functions, be_enable_if_filters() and
be_disable_if_filters() are introduced to enable/disable IFACE filters in
be_open()/be_close() respectively. In be_setup() the IFACE is now created
only with the RSS flag.
Signed-off-by: Kalesh AP <kalesh.purayil@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds vxlan offload specific counters to ethtool stats. We
provide tx/rx queue counters to show the number of vxlan offload pkts
sent/received.
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Add be_get_phys_port_id() function to report physical port id. The port id
should be unique across different be2net devices in the system. We use the
chip serial number along with the physical port number for this.
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The SET_LOOPBACK_MODE command is always issued from ethtool only in a
process context. So, while waiting for the cmd to complete, the driver
can sleep instead of holding spin_lock_bh() on the mcc_lock. This is done
by calling be_mcc_notify() instead of be_mcc_notify_wait() (that returns
only after the cmd completes while the MCCQ is locked).
Signed-off-by: Suresh Reddy <suresh.reddy@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
When the adapter is in error state, return error from be_mcc_notify()
so that the caller routines need not sleep waiting for a response.
Signed-off-by: Suresh Reddy <suresh.reddy@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
be2net: convert dest field in udp-hdr to host-endian
The "dest" field in the UDP-hdr of a TX skb is in network endian format.
Convert it to host endian before accessing it. The os2bmc patch,
mentioned below introduced this code.
Fixes: 760c295e0e8d ("be2net: Support for OS2BMC") Signed-off-by: Venkat Duvvuru <VenkatKumar.Duvvuru@Emulex.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
be2net: fix wrong return value in be_check_ufi_compatibility()
In the commit a6e6ff6eee12f3e
("be2net: simplify UFI compatibility checking"), a return value of "-1"
was incorrectly used in place of "false". This patch fixes it.
Fixes: a6e6ff6eee12f3e ("be2net: simplify UFI compatibility checking") Signed-off-by: Vasundhara Volam <vasundhara.volam@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
pci_enable_device() call sets device power state to D0; there is no need
doing it again.
Signed-off-by: Kalesh AP <kalesh.purayil@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The current code assumes that bridge functionality (EVB) in the adapter
is enabled only when SR-IOV is enabled. This is not always true.
This patch uses the GET_HSW_CONFIG FW cmd to query this from the FW.
Signed-off-by: Kalesh AP <kalesh.purayil@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This change will make be_setup_wol() routine more compact and readable
by removing some duplicate code.
Signed-off-by: Kalesh AP <kalesh.purayil@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Mon, 18 May 2015 21:06:45 +0000 (23:06 +0200)]
be2net: make hwmon interface optional
The hwmon interface in the be2net driver causes a link error when
be2net is built-in while the hwmon subsystem is a loadable module:
drivers/built-in.o: In function `be_probe':
drivers/net/ethernet/emulex/benet/be_main.c:5761: undefined reference to `devm_hwmon_device_register_with_groups'
This adds a new Kconfig symbol, following the example of multiple
other drivers that have the same problem. The new CONFIG_BE2NET_HWMON
will not be available when (BE2NET=y && HWMON=m) to avoid this
problem.
We have to also mark be_hwmon_show_temp as 'static' to ensure the
compiler can optimize out all the unused code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 29e9122b3a ("be2net: Export board temperature using hwmon-sysfs interface.") Signed-off-by: David S. Miller <davem@davemloft.net>
Venkata Duvvuru [Wed, 13 May 2015 07:30:14 +0000 (13:00 +0530)]
be2net: Support for OS2BMC.
OS2BMC feature will allow the server to communicate with the on-board
BMC/idrac (Baseboard Management Controller) over the LOM via
standard Ethernet.
When OS2BMC feature is enabled, the LOM will filter traffic coming
from the host. If the destination MAC address matches the iDRAC MAC
address, it will forward the packet to the NC-SI side band interface
for iDRAC processing. Otherwise, it would send it out on the wire to
the external network. Broadcast and multicast packets are sent on the
side-band NC-SI channel and on the wire as well. Some of the packet
filters are not supported in the NIC and hence driver will identify
such packets and will hint the NIC to send those packets to the BMC.
This is done by duplicating packets on the management ring. Packets
are sent to the management ring, by setting mgmt bit in the wrb header.
The NIC will forward the packets on the management ring to the BMC
through the side-band NC-SI channel.
Please refer to this online document for more details,
http://www.dell.com/downloads/global/products/pedge/
os_to_bmc_passthrough_a_new_chapter_in_system_management.pdf
Signed-off-by: Venkat Duvvuru <VenkatKumar.Duvvuru@Emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Venkata Duvvuru [Wed, 13 May 2015 07:30:13 +0000 (13:00 +0530)]
be2net: Report a "link down" to the stack when a fatal error or fw reset happens.
When an error (related to HW or FW) is detected on a function, the driver
must pro-actively report a "link down" to the stack so that a possible
failover can be initiated. This is being done currently only for some
HW errors. This patch reports a "link down" even for fatal FW errors and
EEH errors.
Signed-off-by: Venkat Duvvuru <VenkatKumar.Duvvuru@Emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Venkata Duvvuru [Wed, 13 May 2015 07:30:12 +0000 (13:00 +0530)]
be2net: Export board temperature using hwmon-sysfs interface.
Ethtool statistics is not the right place to display board temperature.
This patch adds support to export die temperature of devices supported
by be2net driver via the sysfs hwmon interface.
Signed-off-by: Venkat Duvvuru <VenkatKumar.Duvvuru@Emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Wed, 6 May 2015 09:30:39 +0000 (05:30 -0400)]
be2net: update copyright year to 2015
Signed-off-by: Vasundhara Volam <vasundhara.volam@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Wed, 6 May 2015 09:30:37 +0000 (05:30 -0400)]
be2net: simplify UFI compatibility checking
The code in be_check_ufi_compatibility() checks to see if a UFI file meant
for a lower rev of a chip is being flashed on a higher rev, which is
disallowed. This patch re-writes the code needed for this check in a much
simpler manner.
Signed-off-by: Vasundhara Volam <vasundhara.volam@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Suresh Reddy [Wed, 6 May 2015 09:30:36 +0000 (05:30 -0400)]
be2net: post full RXQ on interface enable
When an RXQ is created in be_open(), the driver currently posts only
64 buffers. This sometimes results in packet drops when there is a traffic
burst as soon as the interface is enabled.
This patch fixes this problem by posting the full RXQ on interface enable.
Signed-off-by: Suresh Reddy <Suresh.Reddy@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kalesh AP [Wed, 6 May 2015 09:30:35 +0000 (05:30 -0400)]
be2net: check for INSUFFICIENT_VLANS error
When the FW runs out of vlan filters it can either return an
INSUFFICIENT_RESOURCES error or an INSUFFICIENT_VLANS error.
The driver currently checks only for the former error value.
This patch adds a check for the latter value too.
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Somnath Kotur [Wed, 6 May 2015 09:30:34 +0000 (05:30 -0400)]
be2net: receive pkts with L3, L4 errors on VFs
Currently pkts with L3 or L4 errors received on PFs are not dropped
by the adapter, but instead sent to the stack. This helps the network stack
to better reflect error statistics. This was not being done on BE3 VFs.
This patch fixes this for BE3 VFs.
Signed-off-by: Somnath Kotur <somnath.kotur@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Padmanabh Ratnakar [Wed, 6 May 2015 09:30:33 +0000 (05:30 -0400)]
be2net: set interrupt moderation for Skyhawk-R using EQ-DB
Currently adaptive interrupt moderation is set by calculating
and configuring an EQ-delay every second. This is done via
a FW-cmd. But, on Skyhawk-R a "re-arm to interrupt" delay
can be set while ringing the EQ-DB. This patch uses this
facility to calculate and set the interrupt delay every 1ms.
This helps moderating interrupts better when the traffic
is bursty.
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kalesh AP [Wed, 6 May 2015 09:30:32 +0000 (05:30 -0400)]
be2net: add support for spoofchk setting
This patch adds support for spoofchk configuration for VFs.
When it is enabled, "spoof checking" is done for both MAC-address and VLAN.
For each VF, the HW ensures that the source MAC address (or vlan) of
every outgoing packet exists in the MAC-list (or vlan-list) configured
for RX filtering for that VF. If not, the packet is dropped and an error
is reported to the driver in the TX completion; this is reflected in the
"tx_spoof_check_err" ethtool counter.
This feature is supported in Skyhawk FW version 10.6.31.0 and above.
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
On certain conditions, login failures will just invoke
qla2x00_mark_device_lost() with the intend to do login again;
but if login_retry has been set already, that would fail to set the
relogin needed flag which is required to wakeup the DPC to retry.
Signed-off-by: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com> Signed-off-by: Dan Duval <dan.duval@oracle.com>
If an SRB is NULL but the handle is in range just drop the
command instead of also resetting the adapter. If the handle
is in range then the command was valid at some point and may
have been aborted. Resetting the adapter can lead to extended
recovery times in this case.
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com> Signed-off-by: Dan Duval <dan.duval@oracle.com>
Aovid crashing the system in the scenario where firmware
just completes the command and it can not find the command
during abort mailbox processing. This scenario can lead to
sp reference counter being zero. Instead of crashing the
system, use WARN_ON to print warning in log file.
Signed-off-by: Hiral Patel <hiral.patel@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com> Signed-off-by: Dan Duval <dan.duval@oracle.com>
The "return QLA_SUCCESS" statement just above the "fw_load_failed"
label cannot be reached, hence remove it. Additionally remove the
"else" keyword since the code block below the if-statement ends
with a return statement.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com> Signed-off-by: Dan Duval <dan.duval@oracle.com>
Whether htonl() or __constant_htonl() is used, if the argument
is a constant the conversion happens at compile time. Hence leave
out the __constant_ prefix for this and other endianness
conversion functions. This improves source code readability.
[jejb: checkpatch fixes] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com> Signed-off-by: Dan Duval <dan.duval@oracle.com>
Replace the QLA82XX_ADDR_IN_RANGE() and QLA8044_ADDR_IN_RANGE() macros
with the inline function addr_in_range(). This avoids that the compiler
reports the following warning when building with W=1: comparison of
unsigned expression >= 0 is always true.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com> Signed-off-by: Dan Duval <dan.duval@oracle.com>
Santosh Shilimkar [Wed, 14 Oct 2015 15:52:49 +0000 (08:52 -0700)]
Merge branch 'topic/uek-4.1/ofed' of git://ca-git.us.oracle.com/linux-uek into uek/uek-4.1
* 'topic/uek-4.1/ofed' of git://ca-git.us.oracle.com/linux-uek:
RDS: make send_batch_count tunable effective
RDS: make use of kfree_rcu() and avoid the call_rcu() chain
RDS: verify the underlying transport exists before creating a connection
RDS/IB: print string constants in more places
ib/rds: runtime debuggability enhancement
Santosh Shilimkar [Wed, 14 Oct 2015 15:52:38 +0000 (08:52 -0700)]
Merge branch 'topic/uek-4.1/drivers' of git://ca-git.us.oracle.com/linux-uek into uek/uek-4.1
* 'topic/uek-4.1/drivers' of git://ca-git.us.oracle.com/linux-uek: (50 commits)
mpt2sas: setpci reset kernel oops fix
ixgbe: Advance version to 4.2.1
ixgbe: X540 thermal warning interrupt not a GPI
ixgbe: Fix FCRTH value in VM-to-VM loopback mode
ixgbe: Only clear adapter_stopped if ixgbe_setup_fc succeeded
ixgbe: Correct several flaws with with DCA setup
ixgbe: Add new X550EM SFP+ device ID
ixgbe: Update ixgbe_disable_pcie_master flow for X550*
ixgbe: Add small packet padding support for X550
ixgbe: Correct setting of RDRXCTL register for X550* devices
ixgbe: Correct error path in semaphore handling
ixgbe: Add I2C bus mux support
ixgbe: Limit SFP polling rate
ixgbe: Allow SFP+ on more than 82598 and 82599
ixgbe: Add logic to reset CS4227 when needed
ixgbe: Fix 1G and 10G link stability for X550EM_x SFP+
ixgbe: Add X550EM_x dual-speed SFP+ support
ixgbe: Allow reduced delays during SFP detection
ixgbe: Clear I2C destination location
ixgbe: Enable bit-banging mode on X550
...
Santosh Shilimkar [Tue, 13 Oct 2015 17:10:40 +0000 (10:10 -0700)]
Merge branch 'topic/uek-4.1/ofed' of git://ca-git.us.oracle.com/linux-uek-ofed into topic/uek-4.1/ofed
* 'topic/uek-4.1/ofed' of git://ca-git.us.oracle.com/linux-uek-ofed:
RDS/IB: print string constants in more places
ib/rds: runtime debuggability enhancement
Santosh Shilimkar [Thu, 8 Oct 2015 22:59:14 +0000 (15:59 -0700)]
RDS: make send_batch_count tunable effective
The send_batch_count tunable is stale and code relies on
hard-coded batch count value. Its a nice feature and lets you
tune the system based on different HCAs. TCP transport as well
have different characteristics and tunable can be useful.
There is no change in default behavior with this patch.
Santosh Shilimkar [Thu, 8 Oct 2015 23:26:32 +0000 (16:26 -0700)]
RDS: make use of kfree_rcu() and avoid the call_rcu() chain
call_rcu() chains are expensive and its use in rds_ib_remove_ipaddr()
is just to kfree() the rds_ib_ipaddr. Chains make use of high-latency
rcu_barrier() in modules which can be avoided.
Makes use of kfree_rcu() which is exactly meant for such use
This patch provides the ability to dynamically turn on or off various
types of debug/diag prints inside the RDS module.
The run-time debug prints are controlled by a rds module parameter,
rds_rt_debug_bitmap.
Here is the definition for different bits. We have implemented feature
related bits, such as Connection Management, Active Bonding, Error prints,
Send, Recv.
in net/rds/rds_rt_debug.h
...
enum {
/* bit 0 ~ 19 are feature related bits */
RDS_RTD_ERR = 1 << 0, /* 0x1 */
RDS_RTD_ERR_EXT = 1 << 1, /* 0x2 */
In general, *EXTRA bits mean that you will get extra information but
possible flood prints as well. But every bit can be controlled by users
so users can decide how much information they want to see/collect. The
current embedded printk level used for this patch is KERN_INFO. Most
likely all the msgs will only go to /var/log/messages without showing up
on console if we use the default settings for /proc/sys/kernel/printk and
/etc/rsyslog.conf in ol6 environment.
E.g if we want to turn on RDS_RTD_ERR and RDS_RTD_CM bits. What we can
do is
While posting WRB the next_pointer of the current WRB should point
to itself and the previous WRB next_pointer should point to the
current WRB.
The next pointer value was retrieved during alloc_pdu and was updated
in wrb before ringing the doorbell. The fix retrieves the
next_pointer just before ringing the doorbell and updates in the WRB.
Signed-off-by: John Soni Jose <sony.john@avagotech.com> Signed-off-by: Dan Duval <dan.duval@oracle.com>
Once be2iscsi driver is loaded and operational close Boot
session established by FW.
Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Odin.com> Signed-off-by: Dan Duval <dan.duval@oracle.com>
Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Odin.com> Signed-off-by: Dan Duval <dan.duval@oracle.com>
In mpt2sas driver due to lack of synchronization between ioctl,
BRM status access through sysfs, pci resource removal kernel oops
happen as ioctl path and BRM status sysfs access path still tries
to access the removed resources
Two locks added to provide syncrhonization
1. pci_access_mutex: Mutex to synchronize ioctl,sysfs show path and
pci resource handling. PCI resource freeing will lead to free
vital hardware/memory resource, which might be in use by cli/sysfs
path functions resulting in Null pointer reference followed by kernel
crash. To avoid the above race condition we use mutex syncrhonization
which ensures the syncrhonization between cli/sysfs_show path
Note: pci_access_mutex is used only if nytro warpdrive cards
(ioc->is_warpdrive based on device id) are used
as we could not test this case with other SAS2 HBA cards
We can remove this check if this behaviour confirmed from other
cards.
2. spinlock on list operations over IOCs
Case: when multiple warpdrive cards(IOCs) are in use
Each IOC will added to the ioc list stucture on initialization.
Watchdog threads run at regular intervals to check IOC for any
fault conditions which will trigger the dead_ioc thread to
deallocate pci resource, resulting deleting the IOC netry from list,
this deletion need to protected by spinlock to enusre that
ioc removal is syncrhonized, if not synchronized it might lead to
list_del corruption as the ioc list is traversed in cli path
Signed-off-by: Nagarajkumar Narayanan <nagarajkumar.narayanan@seagate.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Sreekanth Reddy <sreekanth.reddy@avagotech.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
(cherry picked from commit 6229b414b3adb3aac0b54e67d72d6462fc230c0d)
With the addition of X550em_x SFP+ support, the driver is now
functionally equivalent to what will be the 4.2.1 driver when
released, so change the version to match.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit 21dd560162d4bbf98cc81b303bfa19740ae5b964) Signed-off-by: Brian Maly <brian.maly@oracle.com>
The X540 thermal interrupt (IXGBE_EIMS_TS) is not an SDP, so it
doesn't need to be enabled in ixgbe_setup_gpie(). In fact the
value is simply not for the GPIE register at all.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit c5846ba44500293d290eb2a31bd344565f237ad3) Signed-off-by: Brian Maly <brian.maly@oracle.com>
The 82599 and X540 datasheets require that FCRTH be "set" for Tx
switching (VM-to-VM loopback) but it did not previously specify what
the value should be set to. It has now been determined that
the correct value is RXPBSIZE - (24*1024).
This setting is also required for later devices.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit bc1fc64fd2d9093496e5b04c6d94d26bfa629c9c) Signed-off-by: Brian Maly <brian.maly@oracle.com>
A logic error here results in the adapter_stopped flag only being
cleared when ixgbe_setup_fc returns an error. Correct the logic.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit 3507a9b8c9d1684b5095c97f587ee46184e590da) Signed-off-by: Brian Maly <brian.maly@oracle.com>
This change does two things. First, it makes it so that we always
set the relaxed ordering bits related to the DCA registers even if
DCA is not enabled. Second, it moves the configuration out of the
ixgbe_down function and into the ixgbe_configure function before
enabling the Rx and Tx rings. This ensures that DCA is configured
correctly before starting to process packets.
Thanks to Alex Duyck for this fix.
CC: Alex Duyck <aduyck@mirantis.com> Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit 9de7605ea2389d5ab86d6fbb3f1a11b87665a35c) Signed-off-by: Brian Maly <brian.maly@oracle.com>
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from commit 018d7146eee1942f27675bdabf9b43586bfaef72) Signed-off-by: Brian Maly <brian.maly@oracle.com>
projects / users / jedix / linux-maple.git / log