Gavin Shan [Tue, 9 May 2023 00:27:39 +0000 (10:27 +1000)]
hw/riscv: Validate cluster and NUMA node boundary
There are two RISCV machines where NUMA is aware: 'virt' and 'spike'.
Both of them are required to follow cluster-NUMA-node boundary. To
enable the validation to warn about the irregular configuration where
multiple CPUs in one cluster has been associated with multiple NUMA
nodes.
Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230509002739.18388-4-gshan@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Gavin Shan [Tue, 9 May 2023 00:27:38 +0000 (10:27 +1000)]
hw/arm: Validate cluster and NUMA node boundary
There are two ARM machines where NUMA is aware: 'virt' and 'sbsa-ref'.
Both of them are required to follow cluster-NUMA-node boundary. To
enable the validation to warn about the irregular configuration where
multiple CPUs in one cluster have been associated with different NUMA
nodes.
Signed-off-by: Gavin Shan <gshan@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230509002739.18388-3-gshan@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Gavin Shan [Tue, 9 May 2023 00:27:37 +0000 (10:27 +1000)]
numa: Validate cluster and NUMA node boundary if required
For some architectures like ARM64, multiple CPUs in one cluster can be
associated with different NUMA nodes, which is irregular configuration
because we shouldn't have this in baremetal environment. The irregular
configuration causes Linux guest to misbehave, as the following warning
messages indicate.
Improve the situation to warn when multiple CPUs in one cluster have
been associated with different NUMA nodes. However, one NUMA node is
allowed to be associated with different clusters.
Signed-off-by: Gavin Shan <gshan@redhat.com> Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230509002739.18388-2-gshan@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Philippe Mathieu-Daudé [Tue, 6 Jun 2023 13:49:13 +0000 (15:49 +0200)]
hw/remote/proxy: Remove dubious 'event_notifier-posix.c' include
event_notifier-posix.c is registered in meson's util_ss[] source
set, which is built as libqemuutil.a.p library. Both tools and
system emulation binaries are linked with qemuutil, so there is
no point in including this source file.
Introduced in commit bd36adb8df ("multi-process: create IOHUB
object to handle irq").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230606134913.93724-1-philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 23 May 2023 15:56:33 +0000 (17:56 +0200)]
build: further refine build.ninja rules
In commit b0fcc6fc7fc1 ("build: rebuild build.ninja using
"meson setup --reconfigure"", 2023-05-19) I changed the build.ninja
rule in the Makefile to use "meson setup" so that the Makefile would
pick up a changed path to the meson binary.
However, there was a reason why build.ninja was rebuilt using $(NINJA)
itself. Namely, ninja has its own cache of file modification times,
and if it does not know about the modification that was done outside
its control, it will *also* try to regenerate build.ninja. This can be
simply by running "make" on a fresh tree immediately after "configure";
that will trigger an unnecessary meson run.
So, apply a refinement to the rule in order to cover both cases:
- track the meson binary that was used (and that is embedded in
build.ninja's reconfigure rules); to do this, write build.ninja.stamp
right after executing meson successfully
- if it changed, force usage of "$(MESON) setup --reconfigure" to
update the path in the reconfigure rule
- if it didn't change, use "$(NINJA) build.ninja" just like before
commit b0fcc6fc7fc1.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Richard Henderson [Sun, 25 Jun 2023 06:58:49 +0000 (08:58 +0200)]
Merge tag 'hppa-boot-reboot-fixes-pull-request' of https://github.com/hdeller/qemu-hppa into staging
target/hppa: Fix boot and reboot for SMP machines
Fix some SMP-related boot and reboot issues with HP-UX and Linux by
correctly initializing the CPU PSW bits, disabling data and instruction
translations and unhalting the CPU in the qemu hppa_machine_reset()
function.
To work correctly some fixes are needed in the SeaBIOS-hppa firmware too,
which is why this series updates it to version 8 which includes those
fixes and enhancements:
Fixes
- boot of HP-UX with SMP, and
- reboot of Linux and HP-UX with SMP
Enhancements:
- show qemu version in boot menu
- adds exit menu entry in boot menu to quit emulation
- allow to trace PCD_CHASSIS codes more specifically
Signed-off-by: Helge Deller <deller@gmx.de>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZJbYWAAKCRD3ErUQojoP
# X6ExAQCmOXqwJw3SjSE/+hvphJ2mMTJe3i6dU3AWOGlACxxVzAEA7dKSU4d8EtRj
# NZpGKB9NE9eWwQFGJVbVgFeikap44gs=
# =8zCK
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 24 Jun 2023 01:49:44 PM CEST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-boot-reboot-fixes-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: Update to SeaBIOS-hppa version 8
target/hppa: Provide qemu version via fw_cfg to firmware
target/hppa: Fix OS reboot issues
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Sun, 25 Jun 2023 06:58:13 +0000 (08:58 +0200)]
Merge tag 'pull-target-arm-20230623' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Add (experimental) support for FEAT_RME
* host-utils: Avoid using __builtin_subcll on buggy versions of Apple Clang
* target/arm: Restructure has_vfp_d32 test
* hw/arm/sbsa-ref: add ITS support in SBSA GIC
* target/arm: Fix sve predicate store, 8 <= VQ <= 15
* pc-bios/keymaps: Use the official xkb name for Arabic layout, not the legacy synonym
* tag 'pull-target-arm-20230623' of https://git.linaro.org/people/pmaydell/qemu-arm: (26 commits)
pc-bios/keymaps: Use the official xkb name for Arabic layout, not the legacy synonym
target/arm: Fix sve predicate store, 8 <= VQ <= 15
hw/arm/sbsa-ref: add ITS support in SBSA GIC
target/arm: Restructure has_vfp_d32 test
host-utils: Avoid using __builtin_subcll on buggy versions of Apple Clang
docs/system/arm: Document FEAT_RME
target/arm: Add cpu properties for enabling FEAT_RME
target/arm: Implement the granule protection check
target/arm: Implement GPC exceptions
target/arm: Add GPC syndrome
target/arm: Use get_phys_addr_with_struct for stage2
target/arm: Move s1_is_el0 into S1Translate
target/arm: Use get_phys_addr_with_struct in S1_ptw_translate
target/arm: Handle no-execute for Realm and Root regimes
target/arm: Handle Block and Page bits for security space
target/arm: NSTable is RES0 for the RME EL3 regime
target/arm: Pipe ARMSecuritySpace through ptw.c
target/arm: Remove __attribute__((nonnull)) from ptw.c
target/arm: Introduce ARMMMUIdx_Phys_{Realm,Root}
target/arm: Adjust the order of Phys and Stage2 ARMMMUIdx
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Helge Deller [Sat, 24 Jun 2023 09:45:52 +0000 (11:45 +0200)]
target/hppa: Update to SeaBIOS-hppa version 8
Update SeaBIOS-hppa to version 8.
Fixes:
- boot of HP-UX with SMP, and
- reboot of Linux and HP-UX with SMP
Enhancements:
- show qemu version in boot menu
- adds exit menu entry in boot menu to quit emulation
- allow to trace PCD_CHASSIS codes & machine run status
Helge Deller [Fri, 23 Jun 2023 06:24:30 +0000 (08:24 +0200)]
target/hppa: Fix OS reboot issues
When the OS triggers a reboot, the reset helper function sends a
qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET) together with an
EXCP_HLT exception to halt the CPUs.
So, at reboot when initializing the CPUs again, make sure to set all
instruction pointers to the firmware entry point, disable any interrupts,
disable data and instruction translations, enable PSW_Q bit and tell qemu
to unhalt (halted=0) the CPUs again.
This fixes the various reboot issues which were seen when rebooting a
Linux VM, including the case where even the monarch CPU has been virtually
halted from the OS (e.g. via "chcpu -d 0" inside the Linux VM).
Peter Maydell [Tue, 20 Jun 2023 16:20:24 +0000 (17:20 +0100)]
pc-bios/keymaps: Use the official xkb name for Arabic layout, not the legacy synonym
The xkb official name for the Arabic keyboard layout is 'ara'.
However xkb has for at least the past 15 years also permitted it to
be named via the legacy synonym 'ar'. In xkeyboard-config 2.39 this
synoynm was removed, which breaks compilation of QEMU:
FAILED: pc-bios/keymaps/ar
/home/fred/qemu-git/src/qemu/build-full/qemu-keymap -f pc-bios/keymaps/ar -l ar
xkbcommon: ERROR: Couldn't find file "symbols/ar" in include paths
xkbcommon: ERROR: 1 include paths searched:
xkbcommon: ERROR: /usr/share/X11/xkb
xkbcommon: ERROR: 3 include paths could not be added:
xkbcommon: ERROR: /home/fred/.config/xkb
xkbcommon: ERROR: /home/fred/.xkb
xkbcommon: ERROR: /etc/xkb
xkbcommon: ERROR: Abandoning symbols file "(unnamed)"
xkbcommon: ERROR: Failed to compile xkb_symbols
xkbcommon: ERROR: Failed to compile keymap
The upstream xkeyboard-config change removing the compat
mapping is:
https://gitlab.freedesktop.org/xkeyboard-config/xkeyboard-config/-/commit/470ad2cd8fea84d7210377161d86b31999bb5ea6
Make QEMU always ask for the 'ara' xkb layout, which should work on
both older and newer xkeyboard-config. We leave the QEMU name for
this keyboard layout as 'ar'; it is not the only one where our name
for it deviates from the xkb standard name.
Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20230620162024.1132013-1-peter.maydell@linaro.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1709
Richard Henderson [Tue, 20 Jun 2023 13:46:59 +0000 (15:46 +0200)]
target/arm: Fix sve predicate store, 8 <= VQ <= 15
Brown bag time: store instead of load results in uninitialized temp.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1704 Reported-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620134659.817559-1-richard.henderson@linaro.org Fixes: e6dd5e782be ("target/arm: Use tcg_gen_qemu_{ld, st}_i128 in gen_sve_{ld, st}r") Tested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 22 Jun 2023 13:08:23 +0000 (14:08 +0100)]
host-utils: Avoid using __builtin_subcll on buggy versions of Apple Clang
We use __builtin_subcll() to do a 64-bit subtract with borrow-in and
borrow-out when the host compiler supports it. Unfortunately some
versions of Apple Clang have a bug in their implementation of this
intrinsic which means it returns the wrong value. The effect is that
a QEMU built with the affected compiler will hang when emulating x86
or m68k float80 division.
The upstream LLVM issue is:
https://github.com/llvm/llvm-project/issues/55253
The commit that introduced the bug apparently never made it into an
upstream LLVM release without the subsequent fix
https://github.com/llvm/llvm-project/commit/fffb6e6afdbaba563189c1f715058ed401fbc88d
but unfortunately it did make it into Apple Clang 14.0, as shipped
in Xcode 14.3 (14.2 is reported to be OK). The Apple bug number is FB12210478.
Add ifdefs to avoid use of __builtin_subcll() on Apple Clang version
14 or greater. There is not currently a version of Apple Clang which
has the bug fix -- when one appears we should be able to add an upper
bound to the ifdef condition so we can start using the builtin again.
We make the lower bound a conservative "any Apple clang with major
version 14 or greater" because the consequences of incorrectly
disabling the builtin when it would work are pretty small and the
consequences of not disabling it when we should are pretty bad.
Many thanks to those users who both reported this bug and also
did a lot of work in identifying the root cause; in particular
to Daniel Bertalan and osy.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1631
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1659 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Tested-by: Daniel Bertalan <dani@danielbertalan.dev> Tested-by: Tested-By: Solra Bizna <solra@bizna.name>
Message-id: 20230622130823.1631719-1-peter.maydell@linaro.org
Richard Henderson [Thu, 22 Jun 2023 14:30:46 +0000 (16:30 +0200)]
docs/system/arm: Document FEAT_RME
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230622143046.1578160-1-richard.henderson@linaro.org
[PMM: fixed typo; note experimental status in emulation.rst too] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 23 Jun 2023 10:15:48 +0000 (11:15 +0100)]
target/arm: Add cpu properties for enabling FEAT_RME
Add an x-rme cpu property to enable FEAT_RME.
Add an x-l0gptsz property to set GPCCR_EL3.L0GPTSZ,
for testing various possible configurations.
We're not currently completely sure whether FEAT_RME will
be OK to enable purely as a CPU-level property, or if it will
need board co-operation, so we're making these experimental
x- properties, so that the people developing the system
level software for RME can try to start using this and let
us know how it goes. The command line syntax for enabling
this will change in future, without backwards-compatibility.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-21-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 23 Jun 2023 10:15:48 +0000 (11:15 +0100)]
target/arm: Implement the granule protection check
Place the check at the end of get_phys_addr_with_struct,
so that we check all physical results.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-20-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 23 Jun 2023 10:15:48 +0000 (11:15 +0100)]
target/arm: Implement GPC exceptions
Handle GPC Fault types in arm_deliver_fault, reporting as
either a GPC exception at EL3, or falling through to insn
or data aborts at various exception levels.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-19-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 23 Jun 2023 10:15:47 +0000 (11:15 +0100)]
target/arm: Add GPC syndrome
The function takes the fields as filled in by
the Arm ARM pseudocode for TakeGPCException.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-18-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 23 Jun 2023 10:15:47 +0000 (11:15 +0100)]
target/arm: Use get_phys_addr_with_struct for stage2
This fixes a bug in which we failed to initialize
the result attributes properly after the memset.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 23 Jun 2023 10:15:47 +0000 (11:15 +0100)]
target/arm: Move s1_is_el0 into S1Translate
Instead of passing this to get_phys_addr_lpae, stash it
in the S1Translate structure.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 23 Jun 2023 10:15:47 +0000 (11:15 +0100)]
target/arm: Use get_phys_addr_with_struct in S1_ptw_translate
Do not provide a fast-path for physical addresses,
as those will need to be validated for GPC.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-15-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 23 Jun 2023 10:15:46 +0000 (11:15 +0100)]
target/arm: Handle no-execute for Realm and Root regimes
While Root and Realm may read and write data from other spaces,
neither may execute from other pa spaces.
This happens for Stage1 EL3, EL2, EL2&0, and Stage2 EL1&0.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 23 Jun 2023 10:15:46 +0000 (11:15 +0100)]
target/arm: Handle Block and Page bits for security space
With Realm security state, bit 55 of a block or page descriptor during
the stage2 walk becomes the NS bit; during the stage1 walk the bit 5
NS bit is RES0. With Root security state, bit 11 of the block or page
descriptor during the stage1 walk becomes the NSE bit.
Rather than collecting an NS bit and applying it later, compute the
output pa space from the input pa space and unconditionally assign.
This means that we no longer need to adjust the output space earlier
for the NSTable bit.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 23 Jun 2023 10:15:46 +0000 (11:15 +0100)]
target/arm: NSTable is RES0 for the RME EL3 regime
Test in_space instead of in_secure so that we don't
switch out of Root space.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 23 Jun 2023 10:15:45 +0000 (11:15 +0100)]
target/arm: Pipe ARMSecuritySpace through ptw.c
Add input and output space members to S1Translate. Set and adjust
them in S1_ptw_translate, and the various points at which we drop
secure state. Initialize the space in get_phys_addr; for now leave
get_phys_addr_with_secure considering only secure vs non-secure spaces.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 23 Jun 2023 10:15:45 +0000 (11:15 +0100)]
target/arm: Remove __attribute__((nonnull)) from ptw.c
This was added in 7e98e21c098 as part of a reorg in which
one of the argument had been legally NULL, and this caught
actual instances. Now that the reorg is complete, this
serves little purpose.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 23 Jun 2023 10:15:45 +0000 (11:15 +0100)]
target/arm: Introduce ARMMMUIdx_Phys_{Realm,Root}
With FEAT_RME, there are four physical address spaces.
For now, just define the symbols, and mention them in
the same spots as the other Phys indexes in ptw.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 23 Jun 2023 10:15:45 +0000 (11:15 +0100)]
target/arm: Adjust the order of Phys and Stage2 ARMMMUIdx
It will be helpful to have ARMMMUIdx_Phys_* to be in the same
relative order as ARMSecuritySpace enumerators. This requires
the adjustment to the nstable check. While there, check for being
in secure state rather than rely on clearing the low bit making
no change to non-secure state.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 23 Jun 2023 10:15:44 +0000 (11:15 +0100)]
include/exec/memattrs: Add two bits of space to MemTxAttrs
We will need 2 bits to represent ARMSecurityState.
Do not attempt to replace or widen secure, even though it
logically overlaps the new field -- there are uses within
e.g. hw/block/pflash_cfi01.c, which don't know anything
specific about ARM.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 23 Jun 2023 10:15:44 +0000 (11:15 +0100)]
target/arm: Introduce ARMSecuritySpace
Introduce both the enumeration and functions to retrieve
the current state, and state outside of EL3.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 23 Jun 2023 10:15:44 +0000 (11:15 +0100)]
target/arm: Add RME cpregs
This includes GPCCR, GPTBR, MFAR, the TLB flush insns PAALL, PAALLOS,
RPALOS, RPAOS, and the cache flush insns CIPAPA and CIGDPAPA.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 23 Jun 2023 10:15:43 +0000 (11:15 +0100)]
target/arm: SCR_EL3.NS may be RES1
With RME, SEL2 must also be present to support secure state.
The NS bit is RES1 if SEL2 is not present.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 23 Jun 2023 10:15:43 +0000 (11:15 +0100)]
target/arm: Update SCR and HCR for RME
Define the missing SCR and HCR bits, allow SCR_NSE and {SCR,HCR}_GPF
to be set, and invalidate TLBs when NSE changes.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 23 Jun 2023 10:15:43 +0000 (11:15 +0100)]
target/arm: Add isar_feature_aa64_rme
Add the missing field for ID_AA64PFR0, and the predicate.
Disable it if EL3 is forced off by the board or command-line.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAmST/loSHGxhdXJlbnRA
# dml2aWVyLmV1AAoJEPMMOL0/L748dQcQAKjU2vMketVOc5jXCtF7Jej/F6j21kpk
# Wmt/XuR8FDeohHVyWvQ1quxcewn6DfA+aPx1xqnn0nRBcnuqT/g4IHdXFzwMUxMo
# R3CSUHhMbT/tv8gkbn0q+vg1DffGRr65tc+UUOSkyIttF0Lw6ZgZSoUIcUN4zCvk
# zx+Z8T7UEJl/EMGGe6awS2cuCZcFB4pdLzkKUKOrAtaJ35eBnBPTClfijHwW7c+5
# tsiH/O/AenRP4oxYu/r4Z2tsYTSIkU8a5MAFQNxEIuupbrLDYixoV3yS7NuR9Ylg
# KurOLqdNIlW4vhH2080JijMm1JeX9oXboPc5XMe69v+jFEcdBbpKLvd8ryIhG9SA
# RItGkTJDOBp9ALho9rdQDH/W3JxSDX3ohsDVdn8e3nCR9UBRIlO/OFrLS73siHcD
# mOatC1mMjZwo+6/liTQwhKvCjSkQp+vh7bw/+zhyprmHkkZXs9FASr8EGLrryq4G
# 5wV0qIyNmRrpRXBGcMKGlnmXZ4CZ1XqcGL9xvG5VYVImcjJMEJBBs2aNYLrW1d4Q
# 8FkuqeFunRIf5LcG2EMBgBnIBA28Rgm5AtUMAeu6N8kM5oLYG8mFPOevvN4Da8Mp
# Fluyjtl4vT6xwqV4l0dGcxYtHnV98j7oXXuKx7g2L5ko7l7ZpfrNbkgF9bD4VnWv
# 7HTL0KK8nLEs
# =f/mF
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 22 Jun 2023 09:55:06 AM CEST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [undefined]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [undefined]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* tag 'q800-for-8.1-pull-request' of https://github.com/vivier/qemu-m68k: (24 commits)
mac_via: fix rtc command decoding for the PRAM seconds registers
mac_via: fix rtc command decoding from PRAM addresses 0x0 to 0xf
q800: move macfb device to Q800MachineState
q800: don't access Nubus bus directly from the mac-nubus-bridge device
q800: move mac-nubus-bridge device to Q800MachineState
q800: move SWIM device to Q800MachineState
q800: move ESP device to Q800MachineState
q800: move escc_orgate device to Q800MachineState
q800: move ESCC device to Q800MachineState
q800: move dp8393x device to Q800MachineState
hw/net/dp8393x.c: move TYPE_DP8393X and dp8393xState into dp8393x.h
q800: move VIA2 device to Q800MachineState
q800: move VIA1 device to Q800MachineState
q800: reimplement mac-io region aliasing using IO memory region
q800: introduce mac-io container memory region
q800: move GLUE device to Q800MachineState
q800-glue.c: switch TypeInfo registration to use DEFINE_TYPES() macro
q800: move GLUE device into separate q800-glue.c file
q800: move ROM memory region to Q800MachineState
q800: move CPU object into Q800MachineState
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Mark Cave-Ayland [Wed, 21 Jun 2023 08:53:53 +0000 (09:53 +0100)]
mac_via: fix rtc command decoding for the PRAM seconds registers
Analysis of the MacOS toolbox ROM code shows that on startup it attempts 2
separate reads of the seconds registers with commands 0x9d...0x91 followed by
0x8d..0x81 without resetting the command to its initial value. The PRAM seconds
value is only accepted when the values of the 2 separate reads match.
From this we conclude that bit 4 of the rtc command is not decoded or we don't
care about its value when reading the PRAM seconds registers. Implement this
decoding change so that both reads return successfully which allows the MacOS
toolbox ROM to correctly set the date/time.
Mark Cave-Ayland [Wed, 21 Jun 2023 08:53:52 +0000 (09:53 +0100)]
mac_via: fix rtc command decoding from PRAM addresses 0x0 to 0xf
A comparison between the rtc command table included in the comment and the code
itself shows that the decoding for PRAM addresses 0x0 to 0xf is being done on
the raw command, and not the shifted version held in value.
Mark Cave-Ayland [Wed, 21 Jun 2023 08:53:49 +0000 (09:53 +0100)]
q800: move mac-nubus-bridge device to Q800MachineState
Also change the instantiation of the mac-nubus-bridge device to use
object_initialize_child() and map the Nubus address space using
memory_region_add_subregion() instead of sysbus_mmio_map().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-21-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Mark Cave-Ayland [Wed, 21 Jun 2023 08:53:40 +0000 (09:53 +0100)]
q800: reimplement mac-io region aliasing using IO memory region
The current use of aliased memory regions causes us 2 problems: firstly the
output of "info qom-tree" is absolutely huge and difficult to read, and
secondly we have already reached the internal limit for memory regions as
adding any new memory region into the mac-io region causes QEMU to assert
with "phys_section_add: Assertion `map->sections_nb < TARGET_PAGE_SIZE'
failed".
Implement the mac-io region aliasing using a single IO memory region that
applies IO_SLICE_MASK representing the maximum size of the aliased region and
then forwarding the access to the existing mac-io memory region using the
address space API.
Richard Henderson [Wed, 21 Jun 2023 18:08:48 +0000 (20:08 +0200)]
Merge tag 'pull-tricore-20230621-1' of https://github.com/bkoppelmann/qemu into staging
- Implement privilege levels for TriCore
- Fix missing REG_PAIR() for insns using two 32 regs
- Fix erroneously saving PSW.CDC on CALL insns
- Added some missing v1.6.2 insns
# -----BEGIN PGP SIGNATURE-----
#
# iQJTBAABCgA9FiEEbmNqfoPy3Qz6bm43CtLGOWtpyhQFAmSTIWsfHGtiYXN0aWFu
# QG1haWwudW5pLXBhZGVyYm9ybi5kZQAKCRAK0sY5a2nKFEVCEACQFRGj/7ADOWm3
# lhkHGgkwpTgx+YKgeI4rfQ5/AKie9b7BUNljPVp1m2AvPFHU/r/0POzziCTDM+Ty
# M90h5gsEgxNRRVS1T+VkfFTKop7yImo48niDBF4mByP9DZGweCvGEvPD2g/FYvLP
# 0Up13F0NiWKMvocKp/jjI5qejpJqwtn1hjWHTpEXya3u+K/iEku1alI72Xo2oMKW
# pKW2iO/mC4cuEzOdpZt4LSzs9ZMsVpFzVn81VIda9CU2rlSpu+oQevgdWWJhgZGa
# 520JnIsrervsJumBWPxh9R0nrjuhHu34I4HXD38eGhD+Ioz2DQnHy2bA99pIVR7B
# qtHoDNhl7wqWgXBqntS9HvnvDAFyYdVM6aLqw9C7AxKXdRBuxy14R3/hrwMZghRs
# vYx3GUcFHSMJT1tkc8a/P14/mz5SB6/cdjVgPQtTCPBJccly4oc4EG3qn7wYqowZ
# Pbq48h+3+QZ7BsC9sT2AiPq+AmLjxRZRq7SE6YrYrjRDIJz/3IoTR600KW5XsFsj
# gZu/SYWdbNXAVr4c7CCg77lXXQ2/GhPHgCYFjL3djIKwlPP79bhT4cvLXK71yF/4
# 3RcCBt9kRggxDz6E/4I+u5cE4oMbyN1f6AoIn80GUheDstWMACYph5RhbIskxRhY
# PWwJ8ML0c7SOy0A74UbCT82gn1He1A==
# =IKrz
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 21 Jun 2023 06:12:27 PM CEST
# gpg: using RSA key 6E636A7E83F2DD0CFA6E6E370AD2C6396B69CA14
# gpg: issuer "kbastian@mail.uni-paderborn.de"
# gpg: Good signature from "Bastian Koppelmann <kbastian@mail.uni-paderborn.de>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6E63 6A7E 83F2 DD0C FA6E 6E37 0AD2 C639 6B69 CA14
* tag 'pull-tricore-20230621-1' of https://github.com/bkoppelmann/qemu:
target/tricore: Fix ICR.IE offset in RESTORE insn
target/tricore: Honour privilege changes on PSW write
target/tricore: Implement privilege level for all insns
target/tricore: Introduce priv tb flag
target/tricore: Indirect jump insns use tcg_gen_lookup_and_goto_ptr()
target/tricore: ENABLE exit to main-loop
target/tricore: Introduce DISAS_TARGET_EXIT
target/tricore: Fix RR_JLI clobbering reg A[11]
target/tricore: Fix helper_ret() not correctly restoring PSW
target/tricore: Add CHECK_REG_PAIR() for insn accessing 64 bit regs
target/tricore: Correctly fix saving PSW.CDE to CSA on call
target/tricore: Fix out-of-bounds index in imask instruction
target/tricore: Add DISABLE insn variant
target/tricore: Implement SYCSCALL insn
target/tricore: Add shuffle insn
target/tricore: Add crc32.b insn
target/tricore: Add crc32l.w insn
target/tricore: Add LHA insn
target/tricore: Add popcnt.w insn
target/tricore: Introduce ISA 1.6.2 feature
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Bastian Koppelmann [Wed, 21 Jun 2023 14:23:02 +0000 (16:23 +0200)]
target/tricore: Fix ICR.IE offset in RESTORE insn
from ISA v1.6.1 onwards the bit position of ICR.IE changed.
ctx->icr_ie_offset contains the correct value for the ISA version used
by the vCPU. We also need to exit this tb here, as we might have enabled
interrupts.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230621142302.1648383-9-kbastian@mail.uni-paderborn.de>
Bastian Koppelmann [Wed, 21 Jun 2023 14:23:01 +0000 (16:23 +0200)]
target/tricore: Honour privilege changes on PSW write
the CPU can change the privilege level by writing the corresponding bits
in PSW. If this happens all instructions after this 'mtcr' in the TB are
translated with the wrong privilege level. So we have to exit to the
cpu_loop() and start translating again with the new privilege level.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230621142302.1648383-8-kbastian@mail.uni-paderborn.de>
Bastian Koppelmann [Mon, 12 Jun 2023 11:32:44 +0000 (13:32 +0200)]
target/tricore: Add CHECK_REG_PAIR() for insn accessing 64 bit regs
some insns were not checking if an even index was used to access a 64
bit register. In the worst case that could lead to a buffer overflow as
reported in https://gitlab.com/qemu-project/qemu/-/issues/1698.
Siqi Chen [Mon, 12 Jun 2023 11:32:42 +0000 (13:32 +0200)]
target/tricore: Fix out-of-bounds index in imask instruction
When translating "imask" instruction of Tricore architecture, QEMU did not check whether the register index was out of bounds, resulting in a global-buffer-overflow.
Bastian Koppelmann [Wed, 14 Jun 2023 10:00:39 +0000 (12:00 +0200)]
target/tricore: Add DISABLE insn variant
this variant saves the 'IE' bit to a 'd' register. The 'IE' bitfield
changed from ISA version 1.6.1, so we add icr_ie_offset to DisasContext
as with the other DISABLE insn.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230614100039.1337971-9-kbastian@mail.uni-paderborn.de>
That commit tries to make a field in the CPUState struct not be
present when CONFIG_USER_ONLY is set. Unfortunately, you can't
conditionally omit fields in structs like this based on ifdefs that
are set per-target. If you try it, then code in files compiled
per-target (where CONFIG_USER_ONLY is or can be set) will disagree
about the struct layout with files that are compiled once-only (where
this kind of ifdef is never set).
This manifests specifically in 'make check-tcg' failing, because code
in cpus-common.c that sets up the CPUState::cpu_index field puts it
at a different offset from the code in plugins/core.c in
qemu_plugin_vcpu_init_hook() which reads the cpu_index field. The
latter then hits an assert because from its point of view every
thread has a 0 cpu_index. There might be other weird behaviour too.
Mostly we catch this kind of bug because the CONFIG_whatever is
listed in include/exec/poison.h and so the reference to it in
build-once source files will then cause a compiler error.
Unfortunately CONFIG_USER_ONLY is an exception to that: we have some
places where we use it in "safe" ways in headers that will be seen by
once-only source files (e.g. ifdeffing out function prototypes) and
it would be a lot of refactoring to be able to get to a position
where we could poison it. This leaves us in a "you have to be
careful to walk around the bear trap" situation...
Fixes: d7ee93e243597 ("cputlb: Restrict SavedIOTLB to system emulation") Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230620175712.1331625-1-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Tue, 20 Jun 2023 08:26:53 +0000 (10:26 +0200)]
Merge tag 'pull-tcg-20230620' of https://gitlab.com/rth7680/qemu into staging
tcg: Define _CALL_AIX for clang on ppc64
accel/tcg: Build fix for macos catalina
accel/tcg: Handle MO_ATOM_WITHIN16 in do_st16_leN
accel/tcg: Restrict SavedIOTLB to system emulation
accel/tcg: Use generic 'helper-proto-common.h' header
plugins: Remove unused 'exec/helper-proto.h' header
*: Check for CONFIG_USER_ONLY instead of CONFIG_SOFTMMU
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmSRYmIdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8zbAgAlX4GcShS1OU1BDRe
# b0HHHj1fFBB/9yk8f/5WuQb2snYS+pcZCez9XeT175ugovXSOz+shvmFrbRPvpfj
# q8C88CIKCJRsXnhWqKWOKDqgTttu2WNXOvCe0eCZbUoGQ9K1seMvUBq6T50fNv2H
# fXeHtLSu/+jiHIN3+woJqdgrkp0cko2rrpnwIpjuIsY1iz/J/VKEHmnv7Ah+GsRs
# OTYnR7iN6uhBXVll14r3UCylbgdEz58sSSEi3dYYfaTRuijDwOzM0evhk6+5XzHP
# DYwGdbtDE5HJOrCLiKegk80Gh6v1XVZQWnn9PdiN1eJcQsWNT9mYV9/4IsCVrsF4
# 8r5KUg==
# =JmjK
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 20 Jun 2023 10:25:06 AM CEST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-tcg-20230620' of https://gitlab.com/rth7680/qemu:
cputlb: Restrict SavedIOTLB to system emulation
exec/cpu-defs: Check for SOFTMMU instead of !USER_ONLY
accel/tcg/cpu-exec: Use generic 'helper-proto-common.h' header
plugins: Remove unused 'exec/helper-proto.h' header
meson: Replace softmmu_ss -> system_ss
meson: Replace CONFIG_SOFTMMU -> CONFIG_SYSTEM_ONLY
meson: Alias CONFIG_SOFTMMU -> CONFIG_SYSTEM_ONLY
accel/tcg: Check for USER_ONLY definition instead of SOFTMMU one
hw/core/cpu: Check for USER_ONLY definition instead of SOFTMMU one
target/ppc: Check for USER_ONLY definition instead of SOFTMMU one
target/m68k: Check for USER_ONLY definition instead of SOFTMMU one
target/tricore: Remove pointless CONFIG_SOFTMMU guard
target/i386: Simplify i386_tr_init_disas_context()
tcg/ppc: Define _CALL_AIX for clang on ppc64(be)
accel/tcg: Handle MO_ATOM_WITHIN16 in do_st16_leN
host/include/x86_64: Use __m128i for "x" constraints
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Philippe Mathieu-Daudé [Fri, 16 Dec 2022 21:55:16 +0000 (22:55 +0100)]
cputlb: Restrict SavedIOTLB to system emulation
Commit 2f3a57ee47 ("cputlb: ensure we save the IOTLB data in
case of reset") added the SavedIOTLB structure -- which is
system emulation specific -- in the generic CPUState structure.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221216215519.5522-3-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Philippe Mathieu-Daudé [Mon, 5 Jun 2023 23:02:16 +0000 (01:02 +0200)]
exec/cpu-defs: Check for SOFTMMU instead of !USER_ONLY
We want to check the softmmu tlb availability, not
if we are targetting system emulation. Besides, this
code could be used by user emulation in the future.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230605230216.17202-1-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Philippe Mathieu-Daudé [Sun, 11 Jun 2023 08:58:22 +0000 (10:58 +0200)]
accel/tcg/cpu-exec: Use generic 'helper-proto-common.h' header
We only need lookup_tb_ptr() prototype.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230611085846.21415-3-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230611085846.21415-2-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Philippe Mathieu-Daudé [Tue, 13 Jun 2023 13:33:47 +0000 (15:33 +0200)]
meson: Replace softmmu_ss -> system_ss
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since we *might* have user emulation with softmmu,
use the clearer 'CONFIG_SYSTEM_ONLY' key to check
for system emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-9-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Philippe Mathieu-Daudé [Tue, 13 Jun 2023 13:33:45 +0000 (15:33 +0200)]
meson: Alias CONFIG_SOFTMMU -> CONFIG_SYSTEM_ONLY
We use the CONFIG_USER_ONLY key to describe user emulation,
and the CONFIG_SOFTMMU key to describe system emulation. Alias
it as 'CONFIG_SYSTEM_ONLY' for parity with user emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-8-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Philippe Mathieu-Daudé [Tue, 13 Jun 2023 13:33:44 +0000 (15:33 +0200)]
accel/tcg: Check for USER_ONLY definition instead of SOFTMMU one
Since we *might* have user emulation with softmmu,
replace the system emulation check by !user emulation one.
Invert some if() ladders for clarity.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-7-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Philippe Mathieu-Daudé [Tue, 13 Jun 2023 13:33:43 +0000 (15:33 +0200)]
hw/core/cpu: Check for USER_ONLY definition instead of SOFTMMU one
Since we *might* have user emulation with softmmu,
replace the system emulation check by !user emulation one.
Invert the #ifdef'ry in TCGCPUOps structure for clarity.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-6-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Philippe Mathieu-Daudé [Tue, 13 Jun 2023 13:33:42 +0000 (15:33 +0200)]
target/ppc: Check for USER_ONLY definition instead of SOFTMMU one
Since we *might* have user emulation with softmmu,
replace the system emulation check by !user emulation one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20230613133347.82210-5-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Philippe Mathieu-Daudé [Tue, 13 Jun 2023 13:33:41 +0000 (15:33 +0200)]
target/m68k: Check for USER_ONLY definition instead of SOFTMMU one
Since we *might* have user emulation with softmmu,
replace the system emulation check by !user emulation one.
Invert some if() ladders for clarity.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-4-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since cpu_mmu_index() is well-defined for user-only,
we can remove the surrounding #ifdef'ry entirely.
Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-2-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Mon, 5 Jun 2023 21:40:31 +0000 (00:40 +0300)]
tcg/ppc: Define _CALL_AIX for clang on ppc64(be)
Restructure the ifdef ladder, separating 64-bit from 32-bit,
and ensure _CALL_AIX is set for ELF v1. Fixes the build for
ppc64 big-endian host with clang.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
projects / users / dwmw2 / qemu.git / log