added ident_p4d_init() to support 5-level paging, but this function
doesn't check and return errors from ident_pud_init().
For example, the decompressor stub uses this code to create an identity
mapping. If it runs out of pages while trying to allocate a PMD
pagetable, the error will be currently ignored.
Fix this to propagate errors.
[ bp: Space out statements for better readability. ]
The code which limited the number of unacknowledged PSNs was incorrect.
The PSNs are limited to 24 bits and wrap back to zero from 0x00ffffff.
The test was computing a 32 bit value which wraps at 32 bits so that
qp->req.psn can appear smaller than the limit when it is actually larger.
Replace '>' test with psn_compare which is used for other PSN comparisons
and correctly handles the 24 bit size.
Mark the inode security label as invalid if we cannot find
a dentry so that we will retry later rather than marking it
initialized with the unlabeled SID.
Fixes: 9287aed2ad1f ("selinux: Convert isec->lock into a spinlock") Signed-off-by: Tianyue Ren <rentianyue@kylinos.cn>
[PM: minor comment tweaks] Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the error case, where a power domain cannot be powered on
successfully at boot time (in mtk_register_power_domains),
pm_genpd_init would still be called with is_off=false, and the
system would later try to disable the power domain again, triggering
warnings as disabled clocks are disabled again (and other potential
issues).
Also print a warning splat in that case, as this should never
happen.
cdv_intel_dp.c:2101:2: warning: Attempt to free released memory
kfree(gma_connector);
^~~~~~~~~~~~~~~~~~~~
In cdv_intel_dp_init() when the call to cdv_intel_edp_panel_vdd_off()
fails, the handler calls cdv_intel_dp_destroy(connector) which does
the first free of gma_connector. So adjust the goto label and skip
the second free.
`num_reports` is not being properly checked. A malformed event packet with
a large `num_reports` number makes hci_le_direct_adv_report_evt() read out
of bounds. Fix it.
Cc: stable@vger.kernel.org Fixes: 2f010b55884e ("Bluetooth: Add support for handling LE Direct Advertising Report events") Reported-and-tested-by: syzbot+24ebd650e20bd263ca01@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=24ebd650e20bd263ca01 Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is caused by a race between two concurrenct md_ioctl()s closing
the array.
CPU1 (md_ioctl()) CPU2 (md_ioctl())
------ ------
set_bit(MD_CLOSING, &mddev->flags);
did_set_md_closing = true;
WARN_ON_ONCE(test_bit(MD_CLOSING,
&mddev->flags));
if(did_set_md_closing)
clear_bit(MD_CLOSING, &mddev->flags);
Fix the warning by returning immediately if the MD_CLOSING bit is set
in &mddev->flags which indicates that the array is being closed.
Fixes: 065e519e71b2 ("md: MD_CLOSING needs to be cleared after called md_set_readonly or do_md_stop") Reported-by: syzbot+1e46a0864c1a6e9bd3d8@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Dae R. Jeong <dae.r.jeong@kaist.ac.kr> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 3f69cc60768b ("crypto: af_alg - Allow arbitrarily long algorithm
names") made the kernel start accepting arbitrarily long algorithm names
in sockaddr_alg. However, the actual length of the salg_name field
stayed at the original 64 bytes.
This is broken because the kernel can access indices >= 64 in salg_name,
which is undefined behavior -- even though the memory that is accessed
is still located within the sockaddr structure. It would only be
defined behavior if the array were properly marked as arbitrary-length
(either by making it a flexible array, which is the recommended way
these days, or by making it an array of length 0 or 1).
We can't simply change salg_name into a flexible array, since that would
break source compatibility with userspace programs that embed
sockaddr_alg into another struct, or (more commonly) declare a
sockaddr_alg like 'struct sockaddr_alg sa = { .salg_name = "foo" };'.
One solution would be to change salg_name into a flexible array only
when '#ifdef __KERNEL__'. However, that would keep userspace without an
easy way to actually use the longer algorithm names.
Instead, add a new structure 'sockaddr_alg_new' that has the flexible
array field, and expose it to both userspace and the kernel.
Make the kernel use it correctly in alg_bind().
This addresses the syzbot report
"UBSAN: array-index-out-of-bounds in alg_bind"
(https://syzkaller.appspot.com/bug?extid=92ead4eb8e26a26d465e).
Reported-by: syzbot+92ead4eb8e26a26d465e@syzkaller.appspotmail.com Fixes: 3f69cc60768b ("crypto: af_alg - Allow arbitrarily long algorithm names") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
At the moment opening a serial device node (such as /dev/ttyS3)
succeeds even if there is no actual serial device behind it.
Reading/writing/ioctls fail as expected because the uart port is not
initialized (the type is PORT_UNKNOWN) and the TTY_IO_ERROR error state
bit is set fot the tty.
However setting line discipline does not have these checks
8250_port.c (8250 is the default choice made by univ8250_console_init()).
As the result of PORT_UNKNOWN, uart_port::iobase is NULL which
a platform translates onto some address accessing which produces a crash
like below.
This adds tty_port_initialized() to uart_set_ldisc() to prevent the crash.
On Odroid XU LDO12 and LDO15 supplies the power to USB 3.0 blocks but
the GPK GPIO pins are supplied by LDO7 (VDDQ_LCD). LDO7 also supplies
GPJ GPIO pins.
The Exynos pinctrl driver does not take any supplies, so to have entire
GPIO block always available, make the regulator always on.
Fixes: 88644b4c750b ("ARM: dts: exynos: Configure PWM, usb3503, PMIC and thermal on Odroid XU board") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201015182044.480562-3-krzk@kernel.org Tested-by: Gabriel Ribba Esteva <gabriel.ribbae@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The VBUS control (PWREN) and over-current pins of USB 3.0 DWC3
controllers are on Exynos5410 regular GPIOs. This is different than for
example on Exynos5422 where these are special ETC pins with proper reset
values (pulls, functions).
Therefore these pins should be configured to enable proper USB 3.0
peripheral and host modes. This also fixes over-current warning:
[ 6.024658] usb usb4-port1: over-current condition
[ 6.028271] usb usb3-port1: over-current condition
Fixes: cb0896562228 ("ARM: dts: exynos: Add USB to Exynos5410") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201015182044.480562-2-krzk@kernel.org Tested-by: Gabriel Ribba Esteva <gabriel.ribbae@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On Odroid XU board the USB3-0 port is a microUSB and USB3-1 port is USB
type A (host). The roles were copied from Odroid XU3 (Exynos5422)
design which has it reversed.
Fixes: 8149afe4dbf9 ("ARM: dts: exynos: Add initial support for Odroid XU board") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201015182044.480562-1-krzk@kernel.org Tested-by: Gabriel Ribba Esteva <gabriel.ribbae@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Align the SuperSpeed Plus bitrate for f_rndis to match f_ncm's ncm_bitrate
defined by commit 1650113888fe ("usb: gadget: f_ncm: add SuperSpeed descriptors
for CDC NCM").
Cc: Felipe Balbi <balbi@kernel.org> Cc: EJ Hsu <ejh@nvidia.com> Cc: Peter Chen <peter.chen@nxp.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Will McVicker <willmcvicker@google.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20201127140559.381351-2-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In many cases a function that supports SuperSpeed can very well
operate in SuperSpeedPlus, if a gadget controller supports it,
as the endpoint descriptors (and companion descriptors) are
generally identical and can be re-used. This is true for two
commonly used functions: Android's ADB and MTP. So we can simply
assign the usb_function's ssp_descriptors array to point to its
ss_descriptors, if available. Similarly, we need to allow an
epfile's ioctl for FUNCTIONFS_ENDPOINT_DESC to correctly
return the corresponding SuperSpeed endpoint descriptor in case
the connected speed is SuperSpeedPlus as well.
The only exception is if a function wants to implement an
Isochronous endpoint capable of transferring more than 48KB per
service interval when operating at greater than USB 3.1 Gen1
speed, in which case it would require an additional SuperSpeedPlus
Isochronous Endpoint Companion descriptor to be returned as part
of the Configuration Descriptor. Support for that would need
to be separately added to the userspace-facing FunctionFS API
which may not be a trivial task--likely a new descriptor format
(v3?) may need to be devised to allow for separate SS and SSP
descriptors to be supplied.
Add an interface-number sanity check before testing the device flags to
avoid relying on undefined behaviour when left shifting in case a device
uses an interface number greater than or equal to BITS_PER_LONG (i.e. 64
or 32).
The BUG_ON(in_interrupt()) in dm_table_event() is a historic leftover from
a rework of the dm table code which changed the calling context.
Issuing a BUG for a wrong calling context is frowned upon and
in_interrupt() is deprecated and only covering parts of the wrong
contexts. The sanity check for the context is covered by
CONFIG_DEBUG_ATOMIC_SLEEP and other debug facilities already.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
While vxlan doesn't need any extra tailroom, the lowerdev might need it. In
that case, copy it over to reduce the chance for additional (re)allocations
in the transmit path.
It was observed that sending data via batadv over vxlan (on top of
wireguard) reduced the performance massively compared to raw ethernet or
batadv on raw ethernet. A check of perf data showed that the
vxlan_build_skb was calling all the time pskb_expand_head to allocate
enough headroom for:
But the vxlan_config_apply only requested needed headroom for:
lowerdev->hard_header_len + VXLAN6_HEADROOM or VXLAN_HEADROOM
So it completely ignored the needed_headroom of the lower device. The first
caller of net_dev_xmit could therefore never make sure that enough headroom
was allocated for the rest of the transmit path.
powerpc/64s keeps a counter in the mm which counts bits set in
mm_cpumask as well as other things. This means it can't use generic code
to clear bits out of the mask and doesn't adjust the arch specific
counter.
Add an arch override that allows powerpc/64s to use
clear_tasks_mm_cpumask().
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201126102530.691335-4-npiggin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Baytrail pin control has a common register to set up debounce timeout.
When a pin configuration requested debounce to be disabled, the rest
of the pins may still want to have debounce enabled and thus rely on
the common timeout value. Avoid clearing debounce value when turning
it off for one pin while others may still use it.
When GPIO library asks pin control to set the bias, it doesn't pass
any value of it and argument is considered boolean (and this is true
for ACPI GpioIo() / GpioInt() resources, by the way). Thus, individual
drivers must behave well, when they got the resistance value of 1 Ohm,
i.e. transforming it to sane default.
In case of Intel Merrifield pin control hardware the 20 kOhm sounds plausible
because it gives a good trade off between weakness and minimization of leakage
current (will be only 50 uA with the above choice).
drm_dp_mst_allocate_vcpi() invokes
drm_dp_mst_topology_get_port_validated(), which increases the refcount
of the "port".
These reference counting issues take place in two exception handling
paths separately. Either when “slots” is less than 0 or when
drm_dp_init_vcpi() returns a negative value, the function forgets to
reduce the refcnt increased drm_dp_mst_topology_get_port_validated(),
which results in a refcount leak.
Fix these issues by pulling up the error handling when "slots" is less
than 0, and calling drm_dp_mst_topology_put_port() before termination
when drm_dp_init_vcpi() returns a negative value.
Fixes: 1e797f556c61 ("drm/dp: Split drm_dp_mst_allocate_vcpi") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200719154545.GA41231@xin-virtual-machine
[sudip: use old functions before rename] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It has been observed that once per 300-1300 port openings the first
transmitted byte is being corrupted on AM3352 ("v" written to FIFO appeared
as "e" on the wire). It only happened if single byte has been transmitted
right after port open, which means, DMA is not used for this transfer and
the corruption never happened afterwards.
Therefore I've carefully re-read the MDR1 errata (link below), which says
"when accessing the MDR1 registers that causes a dummy under-run condition
that will freeze the UART in IrDA transmission. In UART mode, this may
corrupt the transferred data". Strictly speaking,
omap_8250_mdr1_errataset() performs a read access and if the value is the
same as should be written, exits without errata-recommended FIFO reset.
A brief check of the serial_omap_mdr1_errataset() from the competing
omap-serial driver showed it has no read access of MDR1. After removing the
read access from omap_8250_mdr1_errataset() the data corruption never
happened any more.
syzbot spotted a potential out-of-bounds shift in the PCM OSS layer
where it calculates the buffer size with the arbitrary shift value
given via an ioctl.
Add a range check for avoiding the undefined behavior.
As the value can be treated by a signed integer, the max shift should
be 30.
The console part of sisusbvga is broken vs. printk(). It uses in_atomic()
to detect contexts in which it cannot sleep despite the big fat comment in
preempt.h which says: Do not use in_atomic() in driver code.
in_atomic() does not work on kernels with CONFIG_PREEMPT_COUNT=n which
means that spin/rw_lock held regions are not detected by it.
There is no way to make this work by handing context information through to
the driver and this only can be solved once the core printk infrastructure
supports sleepable console drivers.
UAS does not share the pessimistic assumption storage is making that
devices cannot deal with WRITE_SAME. A few devices supported by UAS,
are reported to not deal well with WRITE_SAME. Those need a quirk.
Add it to the device that needs it.
Reported-by: David C. Partridge <david.partridge@perdrix.co.uk> Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201209152639.9195-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a USB2 device wakeup is not enabled/supported the link state may
still be in U0 in xhci_bus_suspend(), where it's then manually put
to suspended U3 state.
Just as with selective suspend the device needs time to enter U3
suspend before continuing with further suspend operations
(e.g. system suspend), otherwise we may enter system suspend with link
state in U0.
The current channel-map control implementation in USB-audio driver may
lead to an error message like
"control 3:0:0:Playback Channel Map:0: access overflow"
when CONFIG_SND_CTL_VALIDATION is set. It's because the chmap get
callback clears the whole array no matter which count is set, and
rather the false-positive detection.
This patch fixes the problem by clearing only the needed array range
at usb_chmap_ctl_get().
The m250_sel mux clock uses bit 4 in the PRG_ETH0 register. Fix this by
shifting the PRG_ETH0_CLK_M250_SEL_MASK accordingly as the "mask" in
struct clk_mux expects the mask relative to the "shift" field in the
same struct.
While here, get rid of the PRG_ETH0_CLK_M250_SEL_SHIFT macro and use
__ffs() to determine it from the existing PRG_ETH0_CLK_M250_SEL_MASK
macro.
Fixes: 566e8251625304 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20201205213207.519341-1-martin.blumenstingl@googlemail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There have chance to re-enable the eee_ctrl_timer and fire the timer
in napi callback after delete the timer in .stmmac_release(), which
introduces to access eee registers in the timer function after clocks
are disabled then causes system hang. Found this issue when do
suspend/resume and reboot stress test.
It is safe to delete the timer after napi disabled and disable lpi mode.
Fixes: d765955d2ae0b ("stmmac: add the Energy Efficient Ethernet support") Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case error CQE was found while polling TX CQ, the QP is in error
state and all posted WQEs will generate error CQEs without any data
transmitted. Fix it by reopening the channels, via same method used for
TX timeout handling.
In addition add some more info on error CQE and WQE for debug.
Fixes: bd2f631d7c60 ("net/mlx4_en: Notify user when TX ring in error state") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add restarting state flag to avoid scheduling another restart task while
such task is already running. Change task name from watchdog_task to
restart_task to better fit the task role.
Fixes: 1e338db56e5a ("mlx4_en: Fix a race at restart task") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When cwnd is not a multiple of the TSO skb size of N*MSS, we can get
into persistent scenarios where we have the following sequence:
(1) ACK for full-sized skb of N*MSS arrives
-> tcp_write_xmit() transmit full-sized skb with N*MSS
-> move pacing release time forward
-> exit tcp_write_xmit() because pacing time is in the future
(2) TSQ callback or TCP internal pacing timer fires
-> try to transmit next skb, but TSO deferral finds remainder of
available cwnd is not big enough to trigger an immediate send
now, so we defer sending until the next ACK.
(3) repeat...
So we can get into a case where we never mark ourselves as
cwnd-limited for many seconds at a time, even with
bulk/infinite-backlog senders, because:
o In case (1) above, every time in tcp_write_xmit() we have enough
cwnd to send a full-sized skb, we are not fully using the cwnd
(because cwnd is not a multiple of the TSO skb size). So every time we
send data, we are not cwnd limited, and so in the cwnd-limited
tracking code in tcp_cwnd_validate() we mark ourselves as not
cwnd-limited.
o In case (2) above, every time in tcp_write_xmit() that we try to
transmit the "remainder" of the cwnd but defer, we set the local
variable is_cwnd_limited to true, but we do not send any packets, so
sent_pkts is zero, so we don't call the cwnd-limited logic to update
tp->is_cwnd_limited.
Fixes: ca8a22634381 ("tcp: make cwnd-limited checks measurement-based, and gentler") Reported-by: Ingemar Johansson <ingemar.s.johansson@ericsson.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20201209035759.1225145-1-ncardwell.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When do suspend/resume test, there have WARN_ON() log dump from
stmmac_xmit() funciton, the code logic:
entry = tx_q->cur_tx;
first_entry = entry;
WARN_ON(tx_q->tx_skbuff[first_entry]);
In normal case, tx_q->tx_skbuff[txq->cur_tx] should be NULL because
the skb should be handled and freed in stmmac_tx_clean().
But stmmac_resume() reset queue parameters like below, skb buffers
may not be freed.
tx_q->cur_tx = 0;
tx_q->dirty_tx = 0;
So free tx skb buffer in stmmac_resume() to avoid warning and
memory leak.
The PAT bit is in different locations for 4k and 2M/1G page table
entries.
Add a definition for _PAGE_LARGE_CACHE_MASK to represent the three
caching bits (PWT, PCD, PAT), similar to _PAGE_CACHE_MASK for 4k pages,
and use it in the definition of PMD_FLAGS_DEC_WP to get the correct PAT
index for write-protected pages.
Fixes: 6ebcb060713f ("x86/mm: Add support to encrypt the kernel in-place") Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20201111160946.147341-1-nivedita@alum.mit.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
My patch caused kernel Oopses and delays in boot. Revert it.
The problem was that I moved the "mem->dma = paddr;" before the call to
be_fill_queue(). But the first thing that the be_fill_queue() function
does is memset the whole struct to zero which overwrites the assignment.
Link: https://lore.kernel.org/r/X8jXkt6eThjyVP1v@mwanda Fixes: 38b2db564d9a ("scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs()") Cc: stable <stable@vger.kernel.org> Reported-by: Thomas Lamprecht <t.lamprecht@proxmox.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
genksyms does not know or care about the _Static_assert() built-in, and
sometimes falls back to ignoring the later symbols, which causes
undefined behavior such as
WARNING: modpost: EXPORT symbol "ethtool_set_ethtool_phy_ops" [vmlinux] version generation failed, symbol will not be versioned.
ld: net/ethtool/common.o: relocation R_AARCH64_ABS32 against `__crc_ethtool_set_ethtool_phy_ops' can not be used when making a shared object
net/ethtool/common.o:(_ftrace_annotated_branch+0x0): dangerous relocation: unsupported relocation
Redefine static_assert for genksyms to avoid that.
Debounce filter setting should be independent from IRQ type setting
because according to the ACPI specs, there are separate arguments for
specifying debounce timeout and IRQ type in GpioIo() and GpioInt().
Together with commit 06abe8291bc31839950f7d0362d9979edc88a666
("pinctrl: amd: fix incorrect way to disable debounce filter") and
Andy's patch "gpiolib: acpi: Take into account debounce settings" [1],
this will fix broken touchpads for laptops whose BIOS set the
debounce timeout to a relatively large value. For example, the BIOS
of Lenovo AMD gaming laptops including Legion-5 15ARH05 (R7000),
Legion-5P (R7000P) and IdeaPad Gaming 3 15ARH05, set the debounce
timeout to 124.8ms. This led to the kernel receiving only ~7 HID
reports per second from the Synaptics touchpad
(MSFT0001:00 06CB:7F28).
Existing touchpads like [2][3] are not troubled by this bug because
the debounce timeout has been set to 0 by the BIOS before enabling
the debounce filter in setting IRQ type.
[1] https://lore.kernel.org/linux-gpio/20201111222008.39993-11-andriy.shevchenko@linux.intel.com/ 8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings")
[2] https://github.com/Syniurge/i2c-amd-mp2/issues/11#issuecomment-721331582
[3] https://forum.manjaro.org/t/random-short-touchpad-freezes/30832/28
The touchpad operates in Basic Mode by default in the Acer BIOS
setup, but some Aspire/TravelMate models require the i8042 to be
reset in order to be correctly detected.
We need to make sure we are not stomping on the control URB that was
issued when opening the device when attempting to toggle buzzer.
To do that we need to mark it as pending in cm109_open().
The local variable 'cpumask_t mask' is in the stack memory, and its address
is assigned to 'desc->affinity' in 'irq_set_affinity_hint()'.
But the memory area where this variable is located is at risk of being
modified.
During LTP testing, the following error was generated:
Fix it by using 'cpumask_of(cpu)' to get the cpumask.
Signed-off-by: Hao Si <si.hao@zte.com.cn> Signed-off-by: Lin Chen <chen.lin5@zte.com.cn> Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If someone plays with the UFS clk scaling devfreq governor through sysfs,
ufshcd_devfreq_scale may be called even when HBA is not runtime ACTIVE.
This can lead to unexpected error. We cannot just protect it by calling
pm_runtime_get_sync() because that may cause a race condition since HBA
runtime suspend ops need to suspend clk scaling. To fix this call
pm_runtime_get_noresume() and check HBA's runtime status. Only proceed if
HBA is runtime ACTIVE, otherwise just bail.
To start stack unwinding (SP, PC and BLINK) are needed. When the
explicit execution context (pt_regs etc) is not available, unwinder
assumes the task is sleeping (in __switch_to()) and fetches SP and BLINK
from kernel mode stack.
But this assumption is not true, specially in a SMP system, when top
runs on 1 core, there may be active running processes on all cores.
So when unwinding non courrent tasks, ensure they are NOT running.
And while at it, handle the self unwinding case explicitly.
This came out of investigation of a customer reported hang with
rcutorture+top
During CSA, we briefly nullify the phy context, in __iwl_mvm_unassign_vif_chanctx.
In case we have a FW assert right after it, it remains NULL though.
We end up running into endless loop due to mac80211 trying repeatedly to
move us to ASSOC state, and we keep returning -EINVAL. Later down the road
we hit a kernel panic.
Recently introduced async probe on mmc devices can shuffle block IDs.
Pin them to fixed values to ease booting in environments where UUIDs
are not practical. Use newly introduced aliases for mmcblk devices from [1].
When we read device memory, we lock a spinlock, write the address we
want to read from the device and then spin in a loop reading the data
in 32-bit quantities from another register.
As the description makes clear, this is rather inefficient, incurring
a PCIe bus transaction for every read. In a typical device today, we
want to read 786k SMEM if it crashes, leading to 192k register reads.
Occasionally, we've seen the whole loop take over 20 seconds and then
triggering the soft lockup detector.
Clearly, it is unreasonable to spin here for such extended periods of
time.
To fix this, break the loop down into an outer and an inner loop, and
break out of the inner loop if more than half a second elapsed. To
avoid too much overhead, check for that only every 128 reads, though
there's no particular reason for that number. Then, unlock and relock
to obtain NIC access again, reprogram the start address and continue.
This will keep (interrupt) latencies on the CPU down to a reasonable
time.
drivers/spi/spi-bcm2835aux.c:532:50: warning: variable 'err' is
uninitialized when used here [-Wuninitialized]
dev_err(&pdev->dev, "could not get clk: %d\n", err);
^~~
./include/linux/dev_printk.h:112:32: note: expanded from macro 'dev_err'
_dev_err(dev, dev_fmt(fmt), ##__VA_ARGS__)
^~~~~~~~~~~
drivers/spi/spi-bcm2835aux.c:495:9: note: initialize the variable 'err'
to silence this warning
int err;
^
= 0
1 warning generated.
Restore the assignment so that the error value can be used in the
dev_err statement and there is no uninitialized memory being leaked.
Fixes: e13ee6cc4781 ("spi: bcm2835aux: Fix use-after-free on unbind") Link: https://github.com/ClangBuiltLinux/linux/issues/1199 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://lore.kernel.org/r/20201113180701.455541-1-natechancellor@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
[lukas: backport to 4.19-stable, add stable designation] Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: <stable@vger.kernel.org> # v4.4+: e13ee6cc4781: spi: bcm2835aux: Fix use-after-free on unbind Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bcm2835aux_spi_remove() accesses the driver's private data after calling
spi_unregister_master() even though that function releases the last
reference on the spi_master and thereby frees the private data.
Fix by switching over to the new devm_spi_alloc_master() helper which
keeps the private data accessible until the driver has unbound.
If gfs2 tries to mount a (corrupt) file system that has no resource
groups it still tries to set preferences on the first one, which causes
a kernel null pointer dereference. This patch adds a check to function
gfs2_ri_update so this condition is detected and reported back as an
error.
Reported-by: syzbot+e3f23ce40269a4c9053a@syzkaller.appspotmail.com Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the instances were able to use their own options, the userstacktrace
option was left hardcoded for the top level. This made the instance
userstacktrace option bascially into a nop, and will confuse users that set
it, but nothing happens (I was confused when it happened to me!)
Cc: stable@vger.kernel.org Fixes: 16270145ce6b ("tracing: Add trace options for core options to instances") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bcm2835_spi_remove() accesses the driver's private data after calling
spi_unregister_controller() even though that function releases the last
reference on the spi_controller and thereby frees the private data.
Fix by switching over to the new devm_spi_alloc_master() helper which
keeps the private data accessible until the driver has unbound.
bcm_qspi_remove() calls spi_unregister_master() even though
bcm_qspi_probe() calls devm_spi_register_master(). The spi_master is
therefore unregistered and freed twice on unbind.
Moreover, since commit 0392727c261b ("spi: bcm-qspi: Handle clock probe
deferral"), bcm_qspi_probe() leaks the spi_master allocation if the call
to devm_clk_get_optional() fails.
Fix by switching over to the new devm_spi_alloc_master() helper which
keeps the private data accessible until the driver has unbound and also
avoids the spi_master leak on probe.
While at it, fix an ordering issue in bcm_qspi_remove() wherein
spi_unregister_master() is called after uninitializing the hardware,
disabling the clock and freeing an IRQ data structure. The correct
order is to call spi_unregister_master() *before* those teardown steps
because bus accesses may still be ongoing until that function returns.
SPI driver probing currently comprises two steps, whereas removal
comprises only one step:
spi_alloc_master()
spi_register_controller()
spi_unregister_controller()
That's because spi_unregister_controller() calls device_unregister()
instead of device_del(), thereby releasing the reference on the
spi_controller which was obtained by spi_alloc_master().
An SPI driver's private data is contained in the same memory allocation
as the spi_controller struct. Thus, once spi_unregister_controller()
has been called, the private data is inaccessible. But some drivers
need to access it after spi_unregister_controller() to perform further
teardown steps.
Introduce devm_spi_alloc_master() and devm_spi_alloc_slave(), which
release a reference on the spi_controller struct only after the driver
has unbound, thereby keeping the memory allocation accessible. Change
spi_unregister_controller() to not release a reference if the
spi_controller was allocated by one of these new devm functions.
The present commit is small enough to be backportable to stable.
It allows fixing drivers which use the private data in their ->remove()
hook after it's been freed. It also allows fixing drivers which neglect
to release a reference on the spi_controller in the probe error path.
Long-term, most SPI drivers shall be moved over to the devm functions
introduced herein. The few that can't shall be changed in a treewide
commit to explicitly release the last reference on the controller.
That commit shall amend spi_unregister_controller() to no longer release
a reference, thereby completing the migration.
As a result, the behaviour will be less surprising and more consistent
with subsystems such as IIO, which also includes the private data in the
allocation of the generic iio_dev struct, but calls device_del() in
iio_device_unregister().
According to the AMD IOMMU spec, the commit 73db2fc595f3
("iommu/amd: Increase interrupt remapping table limit to 512 entries")
also requires the interrupt table length (IntTabLen) to be set to 9
(power of 2) in the device table mapping entry (DTE).
Fixes: 73db2fc595f3 ("iommu/amd: Increase interrupt remapping table limit to 512 entries") Reported-by: Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Link: https://lore.kernel.org/r/20201207091920.3052-1-suravee.suthikulpanit@amd.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Speakup exposing a line discipline allows userland to try to use it,
while it is deemed to be useless, and thus uselessly exposes potential
bugs. One of them is simply that in such a case if the line sends data,
spk_ttyio_receive_buf2 is called and crashes since spk_ttyio_synth
is NULL.
This change restricts the use of the speakup line discipline to
speakup drivers, thus avoiding such kind of issues altogether.
Arbitration Lost (IAL) can happen after every single byte transfer. If
arbitration is lost, the I2C hardware will autonomously switch from
master mode to slave. If a transfer is not aborted in this state,
consecutive transfers will not be executed by the hardware and will
timeout.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Tested (not extensively) on Vybrid VF500 (Toradex VF50): Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to the "VFxxx Controller Reference Manual" (and the comment
block starting at line 97), Vybrid requires writing a one for clearing
an interrupt flag. Syncing the method for clearing I2SR_IIF in
i2c_imx_isr().
Signed-off-by: Christian Eggers <ceggers@arri.de> Fixes: 4b775022f6fd ("i2c: imx: add struct to hold more configurable quirks") Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
thread 2 (workqueue)
--------
apic_timer_interrupt()
smp_apic_timer_interrupt()
irq_exit()
__do_softirq()
run_timer_softirq()
call_timer_fn()
cifs_echo_request() <- use-after-free in server ptr
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> CC: Stable <stable@vger.kernel.org> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On powerpc, kprobe-direct.tc triggered FTRACE_WARN_ON() in
ftrace_get_addr_new() followed by the below message:
Bad trampoline accounting at: 000000004222522f (wake_up_process+0xc/0x20) (f0000001)
The set of steps leading to this involved:
- modprobe ftrace-direct-too
- enable_probe
- modprobe ftrace-direct
- rmmod ftrace-direct <-- trigger
The problem turned out to be that we were not updating flags in the
ftrace record properly. From the above message about the trampoline
accounting being bad, it can be seen that the ftrace record still has
FTRACE_FL_TRAMP set though ftrace-direct module is going away. This
happens because we are checking if any ftrace_ops has the
FTRACE_FL_TRAMP flag set _before_ updating the filter hash.
The fix for this is to look for any _other_ ftrace_ops that also needs
FTRACE_FL_TRAMP.
The generic parser accepts the preferred_dacs[] pairs as a hint for
assigning a DAC to each pin, but this hint doesn't work always
effectively. Currently it's merely a secondary choice after the trial
with the path index failed. This made sometimes it difficult to
assign DACs without mimicking the connection list and/or the badness
table.
This patch adds a new flag, obey_preferred_dacs, that changes the
behavior of the parser. As its name stands, the parser obeys the
given preferred_dacs[] pairs by skipping the path index matching and
giving a high penalty if no DAC is assigned by the pairs. This mode
will help for assigning the fixed DACs forcibly from the codec
driver.
Currently, locking of ->session is very inconsistent; most places
protect it using the legacy tty mutex, but disassociate_ctty(),
__do_SAK(), tiocspgrp() and tiocgsid() don't.
Two of the writers hold the ctrl_lock (because they already need it for
->pgrp), but __proc_set_tty() doesn't do that yet.
On a PREEMPT=y system, an unprivileged user can theoretically abuse
this broken locking to read 4 bytes of freed memory via TIOCGSID if
tiocgsid() is preempted long enough at the right point. (Other things
might also go wrong, especially if root-only ioctls are involved; I'm
not sure about that.)
Change the locking on ->session such that:
- tty_lock() is held by all writers: By making disassociate_ctty()
hold it. This should be fine because the same lock can already be
taken through the call to tty_vhangup_session().
The tricky part is that we need to shorten the area covered by
siglock to be able to take tty_lock() without ugly retry logic; as
far as I can tell, this should be fine, since nothing in the
signal_struct is touched in the `if (tty)` branch.
- ctrl_lock is held by all writers: By changing __proc_set_tty() to
hold the lock a little longer.
- All readers that aren't holding tty_lock() hold ctrl_lock: By
adding locking to tiocgsid() and __do_SAK(), and expanding the area
covered by ctrl_lock in tiocspgrp().
tiocspgrp() takes two tty_struct pointers: One to the tty that userspace
passed to ioctl() (`tty`) and one to the TTY being changed (`real_tty`).
These pointers are different when ioctl() is called with a master fd.
To properly lock real_tty->pgrp, we must take real_tty->ctrl_lock.
This bug makes it possible for racing ioctl(TIOCSPGRP, ...) calls on
both sides of a PTY pair to corrupt the refcount of `struct pid`,
leading to use-after-free errors.
This is a partial revert of commit 2bb70f0a4b23 ("USB: serial:
option: support dynamic Quectel USB compositions")
The Quectel BG96 is different from most other modern Quectel modems,
having serial functions with 3 endpoints using ff/ff/ff and ff/fe/ff
class/subclass/protocol. Including it in the change to accommodate
dynamic function mapping was incorrect.
Revert to interface number matching for the BG96, assuming static
layout of the RMNET function on interface 4. This restores support
for the serial functions on interfaces 2 and 3.
Full lsusb output for the BG96:
Bus 002 Device 003: ID 2c7c:0296
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x2c7c
idProduct 0x0296
bcdDevice 0.00
iManufacturer 3 Qualcomm, Incorporated
iProduct 2 Qualcomm CDMA Technologies MSM
iSerial 4 d1098243
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 145
bNumInterfaces 5
bConfigurationValue 1
iConfiguration 1 Qualcomm Configuration
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 254
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 4
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Cc: Sebastian Sjoholm <sebastian.sjoholm@gmail.com> Fixes: 2bb70f0a4b23 ("USB: serial: option: support dynamic Quectel USB compositions") Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update the USB serial option driver support for the Fibocom NL668 Cat.4
LTE modules as there are actually several different variants.
Got clarifications from Fibocom, there are distinct products:
- VID:PID 1508:1001, NL668 for IOT (no MBIM interface)
- VID:PID 2cb7:01a0, NL668-AM and NL652-EU are laptop M.2 cards (with
MBIM interfaces for Windows/Linux/Chrome OS), respectively for Americas
and Europe.
Add PID for CH340 that's found on a ch341 based Programmer made by keeyees.
The specific device that contains the serial converter is described
here: http://www.keeyees.com/a/Products/ej/36.html
The driver works flawlessly as soon as the new PID (0x5512) is added to
it.
The function may be unbound causing the ffs_ep and its descriptors
to be freed while userspace is in the middle of an ioctl requesting
the same descriptors. Avoid dangling pointer reference by first
making a local copy of desctiptors before releasing the spinlock.
Toshiaki pointed out that we now have two very similar functions to extract
the L3 protocol number in the presence of VLAN tags. And Daniel pointed out
that the unbounded parsing loop makes it possible for maliciously crafted
packets to loop through potentially hundreds of tags.
Fix both of these issues by consolidating the two parsing functions and
limiting the VLAN tag parsing to a max depth of 8 tags. As part of this,
switch over __vlan_get_protocol() to use skb_header_pointer() instead of
pskb_may_pull(), to avoid the possible side effects of the latter and keep
the skb pointer 'const' through all the parsing functions.
v2:
- Use limit of 8 tags instead of 32 (matching XMIT_RECURSION_LIMIT)
Reported-by: Toshiaki Makita <toshiaki.makita1@gmail.com> Reported-by: Daniel Borkmann <daniel@iogearbox.net> Fixes: d7bf2ebebc2b ("sched: consistently handle layer3 header accesses in the presence of VLANs") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / users / dwmw2 / linux.git / log