Kalyan Thota [Thu, 25 Jun 2020 12:16:59 +0000 (17:46 +0530)]
drm/msm/dpu: add support for dither block in display
This change enables dither block for primary interface
in display.
Enabled for 6bpc in the current version.
Changes in v1:
- Remove redundant error checks (Rob).
Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org> Tested-by: Douglas Anderson <dianders@chromium.org> Tested-by: Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
Rob Clark [Wed, 15 Jul 2020 19:07:30 +0000 (12:07 -0700)]
drm/msm/adreno: fix gpu probe if no interconnect-names
If there is no interconnect-names, but there is an interconnects
property, then of_icc_get(dev, "gfx-mem"); would return an error
rather than NULL.
Also, if there is no interconnect-names property, there will never
be a ocmem path. But of_icc_get(dev, "ocmem") would return -EINVAL
instead of -ENODATA. Just don't bother trying in this case.
v2: explicity check for interconnect-names property
Fixes: 08af4769c7d2 ("drm/msm: handle for EPROBE_DEFER for of_icc_get") Fixes: 00bb9243d346 ("drm/msm/gpu: add support for ocmem interconnect path") Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
Kalyan Thota [Thu, 18 Jun 2020 14:01:24 +0000 (19:31 +0530)]
drm/msm/dpu: ensure device suspend happens during PM sleep
"The PM core always increments the runtime usage counter
before calling the ->suspend() callback and decrements it
after calling the ->resume() callback"
DPU and DSI are managed as runtime devices. When
suspend is triggered, PM core adds a refcount on all the
devices and calls device suspend, since usage count is
already incremented, runtime suspend was not getting called
and it kept the clocks on which resulted in target not
entering into XO shutdown.
Add changes to force suspend on runtime devices during pm sleep.
Changes in v1:
- Remove unnecessary checks in the function
_dpu_kms_disable_dpu (Rob Clark).
Changes in v2:
- Avoid using suspend_late to reset the usagecount
as suspend_late might not be called during suspend
call failures (Doug).
Changes in v3:
- Use force suspend instead of managing device usage_count
via runtime put and get API's to trigger callbacks (Doug).
Changes in v4:
- Check the return values of pm_runtime_force_suspend and
pm_runtime_force_resume API's and pass appropriately (Doug).
Changes in v5:
- With v4 patch, test cycle has uncovered issues in device resume.
On bubs: cmd tx failures were seen as SW is sending panel off
commands when the dsi resources are turned off.
Upon suspend, DRM driver will issue a NULL composition to the
dpu, followed by turning off all the HW blocks.
v5 changes will serialize the NULL commit and resource unwinding
by handling them under PM prepare and PM complete phases there by
ensuring that clks are on when panel off commands are being
processed.
Changes in v6:
- Use drm_mode_config_helper_suspend/resume() instead of legacy API
drm_atomic_helper_suspend/resume() (Doug).
Trigger runtime callbacks from the suspend/resume call to turn
off the resources.
Changes in v7:
- Add "__maybe_unused" to the functions to avoid compilation
failures. Cleanup unnecessary configs (Doug).
Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
Jonathan Marek [Mon, 13 Jul 2020 22:53:41 +0000 (18:53 -0400)]
drm/msm: reset devfreq freq_table/max_state before devfreq_add_device
These never get set back to 0 when probing fails, so an attempt to probe
again results in broken behavior. Fix the problem by setting thse to zero
before they are used.
Signed-off-by: Jonathan Marek <jonathan@marek.ca> Signed-off-by: Rob Clark <robdclark@chromium.org>
Dave Airlie [Tue, 28 Jul 2020 04:17:36 +0000 (14:17 +1000)]
drm/ttm/nouveau: don't call tt destroy callback on alloc failure.
This is confusing, and from my reading of all the drivers only
nouveau got this right.
Just make the API act under driver control of it's own allocation
failing, and don't call destroy, if the page table fails to
create there is nothing to cleanup here.
(I'm willing to believe I've missed something here, so please
review deeply).
Dave Airlie [Mon, 27 Jul 2020 02:03:52 +0000 (12:03 +1000)]
Merge branch 'linux-5.9' of git://github.com/skeggsb/linux into drm-next
- Conversion of all push buffer emission to a new set of macros, with
better safety, sanity-checking, debug ability, and the use of NVIDIA's
class headers. The headers have been trimmed to just what we use as
they're rather extensive, the full versions can be found on NVIDIA's
github[1].
- Proper push buffer space management for EVO/NVD channels.
- Fixes to firmware loading behaviour in odd situations (various
combinations of missing/incompatible FW).
- runpm reference leak fixes
- crc compile fixes without debugfs
- 2MiB system memory pages support on Pascal and newer
- misc other cleanups
Lyude Paul [Mon, 20 Jul 2020 20:56:56 +0000 (16:56 -0400)]
drm/nouveau/kms/nv50-: Fix CRC-related compile errors with debugfs disabled
Looks like I made the mistake of forgetting to check whether or not this
would build without CONFIG_DEBUG_FS, as the Kbuild bot reported some
issues building with tegra_defconfig:
In file included from drivers/gpu/drm/nouveau/nouveau_display.c:47:
./drivers/gpu/drm/nouveau/dispnv50/crc.h: In function
‘nv50_head_crc_late_register’:
./drivers/gpu/drm/nouveau/dispnv50/crc.h:106:47: error: parameter name
omitted
106 | static inline int nv50_head_crc_late_register(struct nv50_head *) {}
| ^~~~~~~~~~~~~~~~~~
./drivers/gpu/drm/nouveau/dispnv50/crc.h:106:54: warning: no return
statement in function returning non-void [-Wreturn-type]
106 | static inline int nv50_head_crc_late_register(struct nv50_head *) {}
| ^~~~~~~~~
./drivers/gpu/drm/nouveau/dispnv50/crc.h: In function
‘nv50_crc_handle_vblank’:
./drivers/gpu/drm/nouveau/dispnv50/crc.h:108:57: warning: ‘return’ with
a value, in function returning void [-Wreturn-type]
108 | nv50_crc_handle_vblank(struct nv50_head *head) { return 0; }
| ^
./drivers/gpu/drm/nouveau/dispnv50/crc.h:108:1: note: declared here
108 | nv50_crc_handle_vblank(struct nv50_head *head) { return 0; }
| ^~~~~~~~~~~~~~~~~~~~~~
./drivers/gpu/drm/nouveau/dispnv50/crc.h: In function
‘nv50_crc_atomic_check’:
./drivers/gpu/drm/nouveau/dispnv50/crc.h:111:23: error: parameter name
omitted
111 | nv50_crc_atomic_check(struct nv50_head *, struct nv50_head_atom *,
| ^~~~~~~~~~~~~~~~~~
./drivers/gpu/drm/nouveau/dispnv50/crc.h:111:43: error: parameter name
omitted
111 | nv50_crc_atomic_check(struct nv50_head *, struct nv50_head_atom *,
| ^~~~~~~~~~~~~~~~~~~~~~~
./drivers/gpu/drm/nouveau/dispnv50/crc.h:112:9: error: parameter name
omitted
112 | struct nv50_head_atom *) {}
| ^~~~~~~~~~~~~~~~~~~~~~~
./drivers/gpu/drm/nouveau/dispnv50/crc.h:112:16: warning: no return
statement in function returning non-void [-Wreturn-type]
112 | struct nv50_head_atom *) {}
| ^~~~~~~~~~~~~~
./drivers/gpu/drm/nouveau/dispnv50/crc.h: In function
‘nv50_crc_atomic_stop_reporting’:
./drivers/gpu/drm/nouveau/dispnv50/crc.h:114:32: error: parameter name
omitted
114 | nv50_crc_atomic_stop_reporting(struct drm_atomic_state *) {}
| ^~~~~~~~~~~~~~~~~~~~~~~~~
./drivers/gpu/drm/nouveau/dispnv50/crc.h: In function
‘nv50_crc_atomic_prepare_notifier_contexts’:
./drivers/gpu/drm/nouveau/dispnv50/crc.h:116:43: error: parameter name
omitted
116 | nv50_crc_atomic_prepare_notifier_contexts(struct drm_atomic_state *) {}
| ^~~~~~~~~~~~~~~~~~~~~~~~~
./drivers/gpu/drm/nouveau/dispnv50/crc.h: In function
‘nv50_crc_atomic_start_reporting’:
./drivers/gpu/drm/nouveau/dispnv50/crc.h:118:33: error: parameter name
omitted
118 | nv50_crc_atomic_start_reporting(struct drm_atomic_state *) {}
| ^~~~~~~~~~~~~~~~~~~~~~~~~
./drivers/gpu/drm/nouveau/dispnv50/crc.h: In function
‘nv50_crc_atomic_set’:
./drivers/gpu/drm/nouveau/dispnv50/crc.h:120:21: error: parameter name
omitted
120 | nv50_crc_atomic_set(struct nv50_head *, struct nv50_head_atom *) {}
| ^~~~~~~~~~~~~~~~~~
./drivers/gpu/drm/nouveau/dispnv50/crc.h:120:41: error: parameter name
omitted
120 | nv50_crc_atomic_set(struct nv50_head *, struct nv50_head_atom *) {}
| ^~~~~~~~~~~~~~~~~~~~~~~
./drivers/gpu/drm/nouveau/dispnv50/crc.h: In function
‘nv50_crc_atomic_clr’:
./drivers/gpu/drm/nouveau/dispnv50/crc.h:122:21: error: parameter name
omitted
122 | nv50_crc_atomic_clr(struct nv50_head *) {}
| ^~~~~~~~~~~~~~~~~~
drivers/gpu/drm/nouveau/nouveau_display.c: In function
‘nouveau_framebuffer_new’:
drivers/gpu/drm/nouveau/nouveau_display.c:286:15: warning: variable
‘width’ set but not used [-Wunused-but-set-variable]
286 | unsigned int width, height, i;
| ^~~~~
So, fix the inline function declarations we use in
drm/drivers/gpu/drm/nouveau/dispnv50/crc.h when CONFIG_DEBUG_FS is
enabled.
Fixes: 12885ecbfe62 ("drm/nouveau/kms/nvd9-: Add CRC support") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 21 Jul 2020 01:34:07 +0000 (11:34 +1000)]
drm/nouveau/kms/nv50-: implement proper push buffer control logic
We had a, what was supposed to be temporary, hack in the KMS code where we'd
completely drain an EVO/NVD channel's push buffer when wrapping to the start
again, instead of treating it as a ring buffer.
projects / users / willy / linux.git / log