Merge tag 'hardening-v6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- lib/prime_numbers: KUnit test should not select PRIME_NUMBERS (Geert
Uytterhoeven)
- ubsan: Fix panic from test_ubsan_out_of_bounds (Mostafa Saleh)
- ubsan: Remove 'default UBSAN' from UBSAN_INTEGER_WRAP (Nathan
Chancellor)
- string: Add load_unaligned_zeropad() code path to sized_strscpy()
(Peter Collingbourne)
- kasan: Add strscpy() test to trigger tag fault on arm64 (Vincenzo
Frascino)
- Disable GCC randstruct for COMPILE_TEST
* tag 'hardening-v6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib/prime_numbers: KUnit test should not select PRIME_NUMBERS
ubsan: Fix panic from test_ubsan_out_of_bounds
lib/Kconfig.ubsan: Remove 'default UBSAN' from UBSAN_INTEGER_WRAP
hardening: Disable GCC randstruct for COMPILE_TEST
kasan: Add strscpy() test to trigger tag fault on arm64
string: Add load_unaligned_zeropad() code path to sized_strscpy()
Merge tag 'gpio-fixes-for-v6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
- check for both the new AND old (deprecated) setter callback when
changing GPIO direction to output
* tag 'gpio-fixes-for-v6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: Allow to use setters with return value for output-only gpios
Merge tag 'thermal-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Add missing DVFS support flags for the Lunar Lake and Panther Lake
platforms to the int340x Intel thermal driver and fix DLVR support
for Panther Lake in it (Srinivas Pandruvada)"
* tag 'thermal-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: int340x: Fix Panther Lake DLVR support
thermal: intel: int340x: Add missing DVFS support flags
Merge tag 'pm-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These are mostly cpufreq fixes, some of which address recent
regressions and some address older issues that have come to light
during the last two weeks, and a runtime PM documentation correction:
- Fix the performance-to-frequency scaling factor computation on
systems using HWP in the intel_pstate driver after a recent
incorrect update of it (Rafael Wysocki)
- Fix the usage of the CPUFREQ_NEED_UPDATE_LIMITS cpufreq driver flag
in the schedutil cpufreq governor after a recent update of it that
has caused frequency limits changes to be missed sometimes (Rafael
Wysocki)
- Address some recently discovered synchronization issues related to
frequency limits changes in the schedutil cpufreq governor and in
the cpufreq core (Rafael Wysocki)
- Fix ITMT support in the amd-pstate cpufreq driver so that it is
enabled after asym priorities have been correctly initialized for
all CPUs (K Prateek Nayak)
- Fix changing min/max limits in the amd-pstate cpufreq driver while
on the performance governor (Dhananjay Ugwekar)
- Fix a function name in the runtime PM documentation that was
previously incorrectly updated by mistake (Sakari Ailus)"
* tag 'pm-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Avoid using inconsistent policy->min and policy->max
cpufreq/sched: Set need_freq_update in ignore_dl_rate_limit()
cpufreq/sched: Explicitly synchronize limits_changed flag handling
cpufreq/sched: Fix the usage of CPUFREQ_NEED_UPDATE_LIMITS
Documentation: PM: runtime: Fix a reference to pm_runtime_autosuspend()
cpufreq: intel_pstate: Fix hwp_get_cpu_scaling()
cpufreq/amd-pstate: Enable ITMT support after initializing core rankings
cpufreq/amd-pstate: Fix min_limit perf and freq updation for performance governor
Merge tag 'riscv-for-linus-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for an issue where C instructions ended up in non-C builds, due
to some broken inline assembly in the KGDB breakpoint insertion code
- A fix to avoid spurious printk messages about misaligned access
performance probing
- A fix for a handful of issues with /proc/iomem's reserved region
handling
- A pair of fixes for module relocation processing
- A few build-time fixes
* tag 'riscv-for-linus-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: KGDB: Remove ".option norvc/.option rvc" for kgdb_compiled_break
riscv: KGDB: Do not inline arch_kgdb_breakpoint()
riscv: Avoid fortify warning in syscall_get_arguments()
riscv: Provide all alternative macros all the time
riscv: module: Allocate PLT entries for R_RISCV_PLT32
riscv: module: Fix out-of-bounds relocation access
riscv: Properly export reserved regions in /proc/iomem
riscv: Fix unaligned access info messages
riscv: Avoid fortify warning in syscall_get_arguments()
Documentation: riscv: Fix typo MIMPLID -> MIMPID
riscv: Use kvmalloc_array on relocation_hashtable
Merge tag 'linux_kselftest-fixes-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"Fixes dynevent_limitations.tc test failure on dash by detecting and
handling bash and dash differences in evaluating \\"
* tag 'linux_kselftest-fixes-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Differentiate bash and dash in dynevent_limitations.tc
Merge tag 'v6.15-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Fix integer overflow in server disconnect deadtime calculation
- Three fixes for potential use after frees: one for oplocks, and one
for leases and one for kerberos authentication
- Fix to prevent attempted write to directory
- Fix locking warning for durable scavenger thread
* tag 'v6.15-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: Prevent integer overflow in calculation of deadtime
ksmbd: fix the warning from __kernel_write_iter
ksmbd: fix use-after-free in smb_break_all_levII_oplock()
ksmbd: fix use-after-free in __smb2_lease_break_noti()
ksmbd: fix WARNING "do not call blocking ops when !TASK_RUNNING"
ksmbd: Fix dangling pointer in krb_authenticate
Merge tag 'block-6.15-20250417' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- MD pull via Yu:
- fix raid10 missing discard IO accounting (Yu Kuai)
- fix bitmap stats for bitmap file (Zheng Qixing)
- fix oops while reading all member disks failed during
check/repair (Meir Elisha)
- NVMe pull via Christoph:
- fix scan failure for non-ANA multipath controllers (Hannes
Reinecke)
- fix multipath sysfs links creation for some cases (Hannes
Reinecke)
- PCIe endpoint fixes (Damien Le Moal)
- use NULL instead of 0 in the auth code (Damien Le Moal)
- Various ublk fixes:
- Slew of selftest additions
- Improvements and fixes for IO cancelation
- Tweak to Kconfig verbiage
- Fix for page dirtying for blk integrity mapped pages
* tag 'block-6.15-20250417' of git://git.kernel.dk/linux: (38 commits)
selftests: ublk: add generic_06 for covering fault inject
ublk: simplify aborting ublk request
ublk: remove __ublk_quiesce_dev()
ublk: improve detection and handling of ublk server exit
ublk: move device reset into ublk_ch_release()
ublk: rely on ->canceling for dealing with ublk_nosrv_dev_should_queue_io
ublk: add ublk_force_abort_dev()
ublk: properly serialize all FETCH_REQs
selftests: ublk: move creating UBLK_TMP into _prep_test()
selftests: ublk: add test_stress_05.sh
selftests: ublk: support user recovery
selftests: ublk: support target specific command line
selftests: ublk: increase max nr_queues and queue depth
selftests: ublk: set queue pthread's cpu affinity
selftests: ublk: setup ring with IORING_SETUP_SINGLE_ISSUER/IORING_SETUP_DEFER_TASKRUN
selftests: ublk: add two stress tests for zero copy feature
selftests: ublk: run stress tests in parallel
selftests: ublk: make sure _add_ublk_dev can return in sub-shell
selftests: ublk: cleanup backfile automatically
selftests: ublk: add io_uring uapi header
...
Merge tag 'io_uring-6.15-20250418' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Correctly cap iov_iter->nr_segs for imports of registered buffers,
both kbuf and normal ones.
Three cleanups to make it saner first, then two fixes for each of the
buffer types.
This fixes a performance regression where partial buffer usage
doesn't trim the tail number of segments, leading the block layer to
iterate the IOs to check if it needs splitting.
- Two patches tweaking the newly introduced zero-copy rx API, mostly to
keep the API consistent once we add multiple interface queues per
ring support in the 6.16 release.
- zc rx unmapping fix for a dead device
* tag 'io_uring-6.15-20250418' of git://git.kernel.dk/linux:
io_uring/zcrx: fix late dma unmap for a dead dev
io_uring/rsrc: ensure segments counts are correct on kbuf buffers
io_uring/rsrc: send exact nr_segs for fixed buffer
io_uring/rsrc: refactor io_import_fixed
io_uring/rsrc: separate kbuf offset adjustments
io_uring/rsrc: don't skip offset calculation
io_uring/zcrx: add pp to ifq conversion helper
io_uring/zcrx: return ifq id to the user
Pavel Begunkov [Fri, 18 Apr 2025 12:02:27 +0000 (13:02 +0100)]
io_uring/zcrx: fix late dma unmap for a dead dev
There is a problem with page pools not dma-unmapping immediately when
the device is going down, and delaying it until the page pool is
destroyed, which is not allowed (see links). That just got fixed for
normal page pools, and we need to address memory providers as well.
Unmap pages in the memory provider uninstall callback, and protect it
with a new lock. There is also a gap between when a dma mapping is
created and the mp is installed, so if the device is killed in between,
io_uring would be holding on to dma mappings to a dead device with no
one to call ->uninstall. Move it to page pool init and rely on
->is_mapped to make sure it's only done once.
Merge tag 'bcachefs-2025-04-17' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Usual set of small fixes/logging improvements.
One bigger user reported fix, for inode <-> dirent inconsistencies
reported in fsck, after moving a subvolume that had been snapshotted"
* tag 'bcachefs-2025-04-17' of git://evilpiepirate.org/bcachefs:
bcachefs: Fix snapshotting a subvolume, then renaming it
bcachefs: Add missing READ_ONCE() for metadata replicas
bcachefs: snapshot_node_missing is now autofix
bcachefs: Log message when incompat version requested but not enabled
bcachefs: Print version_incompat_allowed on startup
bcachefs: Silence extent_poisoned error messages
bcachefs: btree_root_unreadable_and_scan_found_nothing now AUTOFIX
bcachefs: fix bch2_dev_usage_full_read_fast()
bcachefs: Don't print data read retry success on non-errors
bcachefs: Add missing error handling
bcachefs: Prevent granting write refs when filesystem is read-only
Merge tag 'vfio-v6.15-rc3' of https://github.com/awilliam/linux-vfio
Pull vfio fix from Alex Williamson:
- Include devices where the platform indicates PCI INTx is not routed
by setting pdev->irq to zero in the expanded virtualization of the
PCI pin register. This provides consistency in the INFO and SET_IRQS
ioctls (Alex Williamson)
* tag 'vfio-v6.15-rc3' of https://github.com/awilliam/linux-vfio:
vfio/pci: Virtualize zero INTx PIN if no pdev->irq
Merge tag 'spi-fix-v6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few more device specific fixes plus one trivial quirk.
There's a couple of patches for Tegra which avoid some fairly
spectacular log spam if the hardware breaks in ways which were
actually seen in production, plus a fix for the i.MX driver to
propagate errors properly when setting up the hardware.
We also have a trivial patch marking the sun4i driver as being
compatible with GPIO chip selects"
* tag 'spi-fix-v6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-imx: Add check for spi_imx_setupxfer()
spi: tegra210-quad: add rate limiting and simplify timeout error message
spi: tegra210-quad: use WARN_ON_ONCE instead of WARN_ON for timeouts
spi: sun4i: add support for GPIO chip select lines
- ipv6: add exception routes to GC list in rt6_insert_exception()
- netfilter: conntrack: fix erroneous removal of offload bit
- Bluetooth:
- fix sending MGMT_EV_DEVICE_FOUND for invalid address
- l2cap: process valid commands in too long frame
- btnxpuart: Revert baudrate change in nxp_shutdown
Previous releases - always broken:
- ethtool: fix memory corruption during SFP FW flashing
- eth:
- hibmcge: fixes for link and MTU handling, pause frames etc
- igc: fixes for PTM (PCIe timestamping)
- dsa: b53: enable BPDU reception for management port
Misc:
- fixes for Netlink protocol schemas"
* tag 'net-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
net: ethernet: mtk_eth_soc: revise QDMA packet scheduler settings
net: ethernet: mtk_eth_soc: correct the max weight of the queue limit for 100Mbps
net: ethernet: mtk_eth_soc: reapply mdc divider on reset
net: ti: icss-iep: Fix possible NULL pointer dereference for perout request
net: ti: icssg-prueth: Fix possible NULL pointer dereference inside emac_xmit_xdp_frame()
net: ti: icssg-prueth: Fix kernel warning while bringing down network interface
netfilter: conntrack: fix erronous removal of offload bit
net: don't try to ops lock uninitialized devs
ptp: ocp: fix start time alignment in ptp_ocp_signal_set
net: dsa: avoid refcount warnings when ds->ops->tag_8021q_vlan_del() fails
net: dsa: free routing table on probe failure
net: dsa: clean up FDB, MDB, VLAN entries on unbind
net: dsa: mv88e6xxx: fix -ENOENT when deleting VLANs and MST is unsupported
net: dsa: mv88e6xxx: avoid unregistering devlink regions which were never registered
net: txgbe: fix memory leak in txgbe_probe() error path
net: bridge: switchdev: do not notify new brentries as changed
net: b53: enable BPDU reception for management port
netlink: specs: rt-neigh: prefix struct nfmsg members with ndm
netlink: specs: rt-link: adjust mctp attribute naming
netlink: specs: rtnetlink: attribute naming corrections
...
Kent Overstreet [Thu, 17 Apr 2025 18:09:56 +0000 (14:09 -0400)]
bcachefs: Fix snapshotting a subvolume, then renaming it
Subvolume roots and the dirents that point to them are special; they
don't obey the normal snapshot versioning rules because they cross
snapshot boundaries.
We don't keep around older versions of subvolume dirents on rename - we
don't need to, because subvolume dirents are only visible in the parent
subvolume, and we wouldn't be able to match up the different dirent and
inode versions due to crossing the snapshot ID boundary.
That means that when we rename a subvolume, that's been snapshotted, the
older version of the subvolume root will become dangling - it won't have
a dirent that points to it.
That's expected, we just need to tell fsck that this is ok.
Fixes: https://github.com/koverstreet/bcachefs/issues/856 Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
io_uring/rsrc: ensure segments counts are correct on kbuf buffers
kbuf imports have the front offset adjusted and segments removed, but
the tail segments are still included in the segment count that gets
passed in the iov_iter. As the segments aren't necessarily all the
same size, move importing to a separate helper and iterate the
mapped length to get an exact count.
Merge tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull fwctl fixes from Jason Gunthorpe:
"Three small changes from further build testing:
- Don't rely on the userspace uuid.h for the uapi header
- Fix sparse warnings in pds
- Typo in log message"
* tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
fwctl: Fix repeated device word in log message
pds_fwctl: Fix type and endian complaints
fwctl/cxl: Fix uuid_t usage in uapi
Merge tag 'sound-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All are device-specific like quirks, new
IDs, and other safe (or rather boring) changes"
* tag 'sound-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
firmware: cs_dsp: test_bin_error: Fix uninitialized data used as fw version
ASoC: codecs: Add of_match_table for aw888081 driver
ASoC: fsl: fsl_qmc_audio: Reset audio data pointers on TRIGGER_START event
mailmap: Add entry for Srinivas Kandagatla
MAINTAINERS: use kernel.org alias
ASoC: cs42l43: Reset clamp override on jack removal
ALSA: hda/realtek - Fixed ASUS platform headset Mic issue
ALSA: hda/cirrus_scodec_test: Don't select dependencies
ALSA: azt2320: Replace deprecated strcpy() with strscpy()
ASoC: hdmi-codec: use RTD ID instead of DAI ID for ELD entry
ASoC: Intel: avs: Constrain path based on BE capabilities
ALSA: hda/tas2781: Remove unnecessary NULL check before release_firmware()
ASoC: Intel: avs: Fix null-ptr-deref in avs_component_probe()
ASoC: fsl_asrc_dma: get codec or cpu dai from backend
ASoC: qcom: Fix sc7280 lpass potential buffer overflow
ASoC: dwc: always enable/disable i2s irqs
ASoC: Intel: sof_sdw: Add quirk for Asus Zenbook S16
ASoC: codecs:lpass-wsa-macro: Fix logic of enabling vi channels
ASoC: codecs:lpass-wsa-macro: Fix vi feedback rate
Merge tag 'platform-drivers-x86-v6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
"Fixes:
- amd/pmf: Fix STT limits
- asus-laptop: Fix an uninitialized variable
- intel_pmc_ipc: Allow building without ACPI
- mlxbf-bootctl: Use sysfs_emit_at() in secure_boot_fuse_state_show()
- msi-wmi-platform: Add locking to workaround ACPI firmware bug
New HW support:
- alienware-wmi-wmax:
- Extended thermal control support to:
- Alienware Area-51m R2
- Alienware m16 R1
- Alienware m16 R2
- Dell G16 7630
- Dell G5 5505 SE
- G-Mode support to Alienware m16 R1
- x86-android-tablets: Add Vexia Edu Atla 10 tablet 5V data"
* tag 'platform-drivers-x86-v6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: msi-wmi-platform: Workaround a ACPI firmware bug
platform/x86: msi-wmi-platform: Rename "data" variable
platform/x86: alienware-wmi-wmax: Extend support to more laptops
platform/x86: alienware-wmi-wmax: Add G-Mode support to Alienware m16 R1
platform/x86: amd: pmf: Fix STT limits
mlxbf-bootctl: use sysfs_emit_at() in secure_boot_fuse_state_show()
platform/x86: x86-android-tablets: Add Vexia Edu Atla 10 tablet 5V data
platform/x86: x86-android-tablets: Add "9v" to Vexia EDU ATLA 10 tablet symbols
asus-laptop: Fix an uninitialized variable
platform/x86: intel_pmc_ipc: add option to build without ACPI
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Small drivers fixes, except for ufs which has two large updates, one
for exposing the device level feature, which is a new addition to the
device spec and the other reworking the exynos driver to fix coherence
issues on some android phones"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: megaraid_sas: Driver version update to 07.734.00.00-rc1
scsi: megaraid_sas: Block zero-length ATA VPD inquiry
scsi: scsi_transport_srp: Replace min/max nesting with clamp()
scsi: ufs: core: Add device level exception support
scsi: ufs: core: Rename ufshcd_wb_presrv_usrspc_keep_vcc_on()
scsi: smartpqi: Use is_kdump_kernel() to check for kdump
scsi: pm80xx: Set phy_attached to zero when device is gone
scsi: ufs: exynos: gs101: Put UFS device in reset on .suspend()
scsi: ufs: exynos: Move phy calls to .exit() callback
scsi: ufs: exynos: Enable PRDT pre-fetching with UFSHCD_CAP_CRYPTO
scsi: ufs: exynos: Ensure consistent phy reference counts
scsi: ufs: exynos: Disable iocc if dma-coherent property isn't set
scsi: ufs: exynos: Move UFS shareability value to drvdata
scsi: ufs: exynos: Ensure pre_link() executes before exynos_ufs_phy_init()
scsi: iscsi: Fix missing scsi_host_put() in error path
scsi: ufs: core: Fix a race condition related to device commands
scsi: hisi_sas: Fix I/O errors caused by hardware port ID changes
scsi: hisi_sas: Enable force phy when SATA disk directly connected
Merge tag 'ata-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Damien Le Moal:
- Fix how sense data from the sense data for successfull NCQ commands
log page is used to fully initialize the result_tf of a completed
command, so that the sense data returned to the scsi layer is fully
initialized with all the device provided information (from Niklas)
* tag 'ata-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-sata: Save all fields from sense data descriptor
Merge tag 'xfs-fixes-6.15-rc3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull XFS fixes from Carlos Maiolino:
"This mostly includes fixes and documentation for the zoned allocator
feature merged during previous merge window, but it also adds a sysfs
tunable for the zone garbage collector.
There is also a fix for a regression to the RT device that we'd like
to fix ASAP now that we're getting more users on the RT zoned
allocator"
* tag 'xfs-fixes-6.15-rc3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: document zoned rt specifics in admin-guide
xfs: fix fsmap for internal zoned devices
xfs: Fix spelling mistake "drity" -> "dirty"
xfs: compute buffer address correctly in xmbuf_map_backing_mem
xfs: add tunable threshold parameter for triggering zone GC
xfs: mark xfs_buf_free as might_sleep()
xfs: remove the leftover xfs_{set,clear}_li_failed infrastructure
Merge tag 'for-6.15-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- handle encoded read ioctl returning EAGAIN so it does not mistakenly
free the work structure
- escape subvolume path in mount option list so it cannot be wrongly
parsed when the path contains ","
- remove folio size assertions when writing super block to device with
enabled large folios
* tag 'for-6.15-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: remove folio order ASSERT()s in super block writeback path
btrfs: correctly escape subvol in btrfs_show_options()
btrfs: ioctl: don't free iov when btrfs_encoded_read() returns -EAGAIN
Merge tag 'slab-for-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
- Stable fix adding zero initialization of slab->obj_ext to prevent
crashes with allocation profiling (Suren Baghdasaryan)
* tag 'slab-for-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: ensure slab->obj_exts is clear in a newly allocated slab page
Rafael J. Wysocki [Thu, 17 Apr 2025 15:55:09 +0000 (17:55 +0200)]
Merge tag 'amd-pstate-v6.15-2025-04-15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge amd-pstate content for 6.15 (4/15/25) from Mario Limonciello:
"Add a fix for X3D processors where depending upon what BIOS was
set initially rankings might be set improperly.
Add a fix for changing min/max limits while on the performance
governor."
* tag 'amd-pstate-v6.15-2025-04-15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Enable ITMT support after initializing core rankings
cpufreq/amd-pstate: Fix min_limit perf and freq updation for performance governor
Rafael J. Wysocki [Wed, 16 Apr 2025 14:12:37 +0000 (16:12 +0200)]
cpufreq: Avoid using inconsistent policy->min and policy->max
Since cpufreq_driver_resolve_freq() can run in parallel with
cpufreq_set_policy() and there is no synchronization between them,
the former may access policy->min and policy->max while the latter
is updating them and it may see intermediate values of them due
to the way the update is carried out. Also the compiler is free
to apply any optimizations it wants both to the stores in
cpufreq_set_policy() and to the loads in cpufreq_driver_resolve_freq()
which may result in additional inconsistencies.
To address this, use WRITE_ONCE() when updating policy->min and
policy->max in cpufreq_set_policy() and use READ_ONCE() for reading
them in cpufreq_driver_resolve_freq(). Moreover, rearrange the update
in cpufreq_set_policy() to avoid storing intermediate values in
policy->min and policy->max with the help of the observation that
their new values are expected to be properly ordered upfront.
Also modify cpufreq_driver_resolve_freq() to take the possible reverse
ordering of policy->min and policy->max, which may happen depending on
the ordering of operations when this function and cpufreq_set_policy()
run concurrently, into account by always honoring the max when it
turns out to be less than the min (in case it comes from thermal
throttling or similar).
Fixes: 151717690694 ("cpufreq: Make policy min/max hard requirements") Cc: 5.16+ <stable@vger.kernel.org> # 5.16+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Christian Loehle <christian.loehle@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://patch.msgid.link/5907080.DvuYhMxLoT@rjwysocki.net
Rafael J. Wysocki [Tue, 15 Apr 2025 10:00:52 +0000 (12:00 +0200)]
cpufreq/sched: Set need_freq_update in ignore_dl_rate_limit()
Notice that ignore_dl_rate_limit() need not piggy back on the
limits_changed handling to achieve its goal (which is to enforce a
frequency update before its due time).
Namely, if sugov_should_update_freq() is updated to check
sg_policy->need_freq_update and return 'true' if it is set when
sg_policy->limits_changed is not set, ignore_dl_rate_limit() may
set the former directly instead of setting the latter, so it can
avoid hitting the memory barrier in sugov_should_update_freq().
Rafael J. Wysocki [Tue, 15 Apr 2025 09:59:15 +0000 (11:59 +0200)]
cpufreq/sched: Explicitly synchronize limits_changed flag handling
The handling of the limits_changed flag in struct sugov_policy needs to
be explicitly synchronized to ensure that cpufreq policy limits updates
will not be missed in some cases.
Without that synchronization it is theoretically possible that
the limits_changed update in sugov_should_update_freq() will be
reordered with respect to the reads of the policy limits in
cpufreq_driver_resolve_freq() and in that case, if the limits_changed
update in sugov_limits() clobbers the one in sugov_should_update_freq(),
the new policy limits may not take effect for a long time.
Likewise, the limits_changed update in sugov_limits() may theoretically
get reordered with respect to the updates of the policy limits in
cpufreq_set_policy() and if sugov_should_update_freq() runs between
them, the policy limits change may be missed.
To ensure that the above situations will not take place, add memory
barriers preventing the reordering in question from taking place and
add READ_ONCE() and WRITE_ONCE() annotations around all of the
limits_changed flag updates to prevent the compiler from messing up
with that code.
Fixes: 600f5badb78c ("cpufreq: schedutil: Don't skip freq update when limits change") Cc: 5.3+ <stable@vger.kernel.org> # 5.3+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Christian Loehle <christian.loehle@arm.com> Link: https://patch.msgid.link/3376719.44csPzL39Z@rjwysocki.net
Rafael J. Wysocki [Tue, 15 Apr 2025 09:58:08 +0000 (11:58 +0200)]
cpufreq/sched: Fix the usage of CPUFREQ_NEED_UPDATE_LIMITS
Commit 8e461a1cb43d ("cpufreq: schedutil: Fix superfluous updates caused
by need_freq_update") modified sugov_should_update_freq() to set the
need_freq_update flag only for drivers with CPUFREQ_NEED_UPDATE_LIMITS
set, but that flag generally needs to be set when the policy limits
change because the driver callback may need to be invoked for the new
limits to take effect.
However, if the return value of cpufreq_driver_resolve_freq() after
applying the new limits is still equal to the previously selected
frequency, the driver callback needs to be invoked only in the case
when CPUFREQ_NEED_UPDATE_LIMITS is set (which means that the driver
specifically wants its callback to be invoked every time the policy
limits change).
Update the code accordingly to avoid missing policy limits changes for
drivers without CPUFREQ_NEED_UPDATE_LIMITS.
Fixes: 8e461a1cb43d ("cpufreq: schedutil: Fix superfluous updates caused by need_freq_update") Closes: https://lore.kernel.org/lkml/Z_Tlc6Qs-tYpxWYb@linaro.org/ Reported-by: Stephan Gerhold <stephan.gerhold@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Christian Loehle <christian.loehle@arm.com> Link: https://patch.msgid.link/3010358.e9J7NaK4W3@rjwysocki.net
The QDMA packet scheduler suffers from a performance issue.
Fix this by picking up changes from MediaTek's SDK which change to use
Token Bucket instead of Leaky Bucket and fix the SPEED_1000 configuration.
net: ethernet: mtk_eth_soc: reapply mdc divider on reset
In the current method, the MDC divider was reset to the default setting
of 2.5MHz after the NETSYS SER. Therefore, we need to reapply the MDC
divider configuration function in mtk_hw_init() after reset.
Paolo Abeni [Thu, 17 Apr 2025 13:20:41 +0000 (15:20 +0200)]
Merge tag 'nf-25-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fix for net
The following batch contains one Netfilter fix for net:
1) conntrack offload bit is erroneously unset in a race scenario,
from Florian Westphal.
netfilter pull request 25-04-17
* tag 'nf-25-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: conntrack: fix erronous removal of offload bit
====================
Pavel Begunkov [Thu, 17 Apr 2025 09:32:33 +0000 (10:32 +0100)]
io_uring/rsrc: refactor io_import_fixed
io_import_fixed is a mess. Even though we know the final len of the
iterator, we still assign offset + len and do some magic after to
correct for that.
Do offset calculation first and finalise it with iov_iter_bvec at the
end.
Pavel Begunkov [Thu, 17 Apr 2025 09:32:32 +0000 (10:32 +0100)]
io_uring/rsrc: separate kbuf offset adjustments
Kernel registered buffers are special because segments are not uniform
in size, and we have a bunch of optimisations based on that uniformity
for normal buffers. Handle kbuf separately, it'll be cleaner this way.
Pavel Begunkov [Thu, 17 Apr 2025 09:32:31 +0000 (10:32 +0100)]
io_uring/rsrc: don't skip offset calculation
Don't optimise for requests with offset=0. Large registered buffers are
the preference and hence the user is likely to pass an offset, and the
adjustments are not expensive and will be made even cheaper in following
patches.
Merge tag 'nvme-6.15-2025-04-17' of git://git.infradead.org/nvme into block-6.15
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.15
- fix scan failure for non-ANA multipath controllers (Hannes Reinecke)
- fix multipath sysfs links creation for some cases (Hannes Reinecke)
- PCIe endpoint fixes (Damien Le Moal)
- use NULL instead of 0 in the auth code (Damien Le Moal)"
* tag 'nvme-6.15-2025-04-17' of git://git.infradead.org/nvme:
nvmet: pci-epf: cleanup link state management
nvmet: pci-epf: clear CC and CSTS when disabling the controller
nvmet: pci-epf: always fully initialize completion entries
nvmet: auth: use NULL to clear a pointer in nvmet_auth_sq_free()
nvme-multipath: sysfs links may not be created for devices
nvme: fixup scan failure for non-ANA multipath controllers
Tamura Dai [Thu, 17 Apr 2025 01:16:05 +0000 (10:16 +0900)]
spi: spi-imx: Add check for spi_imx_setupxfer()
Add check for the return value of spi_imx_setupxfer().
spi_imx->rx and spi_imx->tx function pointer can be NULL when
spi_imx_setupxfer() return error, and make NULL pointer dereference.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Call trace:
0x0
spi_imx_pio_transfer+0x50/0xd8
spi_imx_transfer_one+0x18c/0x858
spi_transfer_one_message+0x43c/0x790
__spi_pump_transfer_message+0x238/0x5d4
__spi_sync+0x2b0/0x454
spi_write_then_read+0x11c/0x200
Paolo Abeni [Thu, 17 Apr 2025 11:08:41 +0000 (13:08 +0200)]
Merge tag 'for-net-2025-04-16' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- l2cap: Process valid commands in too long frame
- vhci: Avoid needless snprintf() calls
* tag 'for-net-2025-04-16' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: vhci: Avoid needless snprintf() calls
Bluetooth: l2cap: Process valid commands in too long frame
====================
====================
Bug fixes from XDP and perout series
This patch series consists of bug fixes from the XDP series:
1. Fixes a kernel warning that occurs when bringing down the
network interface.
2. Resolves a potential NULL pointer dereference in the
emac_xmit_xdp_frame() function.
3. Resolves a potential NULL pointer dereference in the
icss_iep_perout_enable() function
net: ti: icss-iep: Fix possible NULL pointer dereference for perout request
The ICSS IEP driver tracks perout and pps enable state with flags.
Currently when disabling pps and perout signals during icss_iep_exit(),
results in NULL pointer dereference for perout.
To fix the null pointer dereference issue, the icss_iep_perout_enable_hw
function can be modified to directly clear the IEP CMP registers when
disabling PPS or PEROUT, without referencing the ptp_perout_request
structure, as its contents are irrelevant in this case.
Fixes: 9b115361248d ("net: ti: icssg-prueth: Fix clearing of IEP_CMP_CFG registers during iep_init") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/7b1c7c36-363a-4085-b26c-4f210bee1df6@stanley.mountain/ Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250415090543.717991-4-m-malladi@ti.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net: ti: icssg-prueth: Fix possible NULL pointer dereference inside emac_xmit_xdp_frame()
There is an error check inside emac_xmit_xdp_frame() function which
is called when the driver wants to transmit XDP frame, to check if
the allocated tx descriptor is NULL, if true to exit and return
ICSSG_XDP_CONSUMED implying failure in transmission.
In this case trying to free a descriptor which is NULL will result
in kernel crash due to NULL pointer dereference. Fix this error handling
and increase netdev tx_dropped stats in the caller of this function
if the function returns ICSSG_XDP_CONSUMED.
Fixes: 62aa3246f462 ("net: ti: icssg-prueth: Add XDP support") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/70d8dd76-0c76-42fc-8611-9884937c82f5@stanley.mountain/ Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250415090543.717991-3-m-malladi@ti.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net: ti: icssg-prueth: Fix kernel warning while bringing down network interface
During network interface initialization, the NIC driver needs to register
its Rx queue with the XDP, to ensure the incoming XDP buffer carries a
pointer reference to this info and is stored inside xdp_rxq_info.
While this struct isn't tied to XDP prog, if there are any changes in
Rx queue, the NIC driver needs to stop the Rx queue by unregistering
with XDP before purging and reallocating memory. Drop page_pool destroy
during Rx channel reset as this is already handled by XDP during
xdp_rxq_info_unreg (Rx queue unregister), failing to do will cause the
following warning:
Fixes: 46eeb90f03e0 ("net: ti: icssg-prueth: Use page_pool API for RX buffer allocation") Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250415090543.717991-2-m-malladi@ti.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
netfilter: conntrack: fix erronous removal of offload bit
The blamed commit exposes a possible issue with flow_offload_teardown():
We might remove the offload bit of a conntrack entry that has been
offloaded again.
1. conntrack entry c1 is offloaded via flow f1 (f1->ct == c1).
2. f1 times out and is pushed back to slowpath, c1 offload bit is
removed. Due to bug, f1 is not unlinked from rhashtable right away.
3. a new packet arrives for the flow and re-offload is triggered, i.e.
f2->ct == c1. This is because lookup in flowtable skip entries with
teardown bit set.
4. Next flowtable gc cycle finds f1 again
5. flow_offload_teardown() is called again for f1 and c1 offload bit is
removed again, even though we have f2 referencing the same entry.
This is harmless, but clearly not correct.
Fix the bug that exposes this: set 'teardown = true' to have the gc
callback unlink the flowtable entry from the table right away instead of
the unintentional defer to the next round.
Also prevent flow_offload_teardown() from fixing up the ct state more than
once: We could also be called from the data path or a notifier, not only
from the flowtable gc callback.
NF_FLOW_TEARDOWN can never be unset, so we can use it as synchronization
point: if we observe did not see a 0 -> 1 transition, then another CPU
is already doing the ct state fixups for us.
Hans Holmberg [Wed, 9 Apr 2025 12:39:56 +0000 (12:39 +0000)]
xfs: document zoned rt specifics in admin-guide
Document the lifetime, nolifetime and max_open_zones mount options
added for zoned rt file systems.
Also add documentation describing the max_open_zones sysfs attribute
exposed in /sys/fs/xfs/<dev>/zoned/
Fixes: 4e4d52075577 ("xfs: add the zoned space allocator") Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Carlos Maiolino <cem@kernel.org>
Merge tag 'md-6.15-20250416' of https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux into block-6.15
Pull MD fixes from Yu:
"- fix raid10 missing discard IO accounting (Yu Kuai)
- fix bitmap stats for bitmap file (Zheng Qixing)
- fix oops while reading all member disks failed during check/repair
(Meir Elisha)"
* tag 'md-6.15-20250416' of https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux:
md/raid1: Add check for missing source disk in process_checks()
md/md-bitmap: fix stats collection for external bitmaps
md/raid10: fix missing discard IO accounting
Merge tag 'mm-hotfixes-stable-2025-04-16-19-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"31 hotfixes.
9 are cc:stable and the remainder address post-6.15 issues or aren't
considered necessary for -stable kernels.
22 patches are for MM, 9 are otherwise"
* tag 'mm-hotfixes-stable-2025-04-16-19-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
MAINTAINERS: update HUGETLB reviewers
mm: fix apply_to_existing_page_range()
selftests/mm: fix compiler -Wmaybe-uninitialized warning
alloc_tag: handle incomplete bulk allocations in vm_module_tags_populate
mailmap: add entry for Jean-Michel Hautbois
mm: (un)track_pfn_copy() fix + doc improvements
mm: fix filemap_get_folios_contig returning batches of identical folios
mm/hugetlb: add a line break at the end of the format string
selftests: mincore: fix tmpfs mincore test failure
mm/hugetlb: fix set_max_huge_pages() when there are surplus pages
mm/cma: report base address of single range correctly
mm: page_alloc: speed up fallbacks in rmqueue_bulk()
kunit: slub: add module description
mm/kasan: add module decription
ucs2_string: add module description
zlib: add module description
fpga: tests: add module descriptions
samples/livepatch: add module descriptions
ASN.1: add module description
mm/vma: add give_up_on_oom option on modify/merge, use in uffd release
...
Ming Lei [Wed, 16 Apr 2025 03:54:41 +0000 (11:54 +0800)]
ublk: simplify aborting ublk request
Now ublk_abort_queue() is moved to ublk char device release handler,
meantime our request queue is "quiesced" because either ->canceling was
set from uring_cmd cancel function or all IOs are inflight and can't be
completed by ublk server, things becomes easy much:
- all uring_cmd are done, so we needn't to mark io as UBLK_IO_FLAG_ABORTED
for handling completion from uring_cmd
- ublk char device is closed, no one can hold IO request reference any more,
so we can simply complete this request or requeue it for ublk_nosrv_should_reissue_outstanding.
ublk: improve detection and handling of ublk server exit
There are currently two ways in which ublk server exit is detected by
ublk_drv:
1. uring_cmd cancellation. If there are any outstanding uring_cmds which
have not been completed to the ublk server when it exits, io_uring
calls the uring_cmd callback with a special cancellation flag as the
issuing task is exiting.
2. I/O timeout. This is needed in addition to the above to handle the
"saturated queue" case, when all I/Os for a given queue are in the
ublk server, and therefore there are no outstanding uring_cmds to
cancel when the ublk server exits.
There are a couple of issues with this approach:
- It is complex and inelegant to have two methods to detect the same
condition
- The second method detects ublk server exit only after a long delay
(~30s, the default timeout assigned by the block layer). This delays
the nosrv behavior from kicking in and potential subsequent recovery
of the device.
The second issue is brought to light with the new test_generic_06 which
will be added in following patch. It fails before this fix:
selftests: ublk: test_generic_06.sh
dev id is 0
dd: error writing '/dev/ublkb0': Input/output error
1+0 records in
0+0 records out
0 bytes copied, 30.0611 s, 0.0 kB/s
DEAD
dd took 31 seconds to exit (>= 5s tolerance)!
generic_06 : [FAIL]
Fix this by instead detecting and handling ublk server exit in the
character file release callback. This has several advantages:
- This one place can handle both saturated and unsaturated queues. Thus,
it replaces both preexisting methods of detecting ublk server exit.
- It runs quickly on ublk server exit - there is no 30s delay.
- It starts the process of removing task references in ublk_drv. This is
needed if we want to relax restrictions in the driver like letting
only one thread serve each queue
There is also the disadvantage that the character file release callback
can also be triggered by intentional close of the file, which is a
significant behavior change. Preexisting ublk servers (libublksrv) are
dependent on the ability to open/close the file multiple times. To
address this, only transition to a nosrv state if the file is released
while the ublk device is live. This allows for programs to open/close
the file multiple times during setup. It is still a behavior change if a
ublk server decides to close/reopen the file while the device is LIVE
(i.e. while it is responsible for serving I/O), but that would be highly
unusual. This behavior is in line with what is done by FUSE, which is
very similar to ublk in that a userspace daemon is providing services
traditionally provided by the kernel.
With this change in, the new test (and all other selftests, and all
ublksrv tests) pass:
selftests: ublk: test_generic_06.sh
dev id is 0
dd: error writing '/dev/ublkb0': Input/output error
1+0 records in
0+0 records out
0 bytes copied, 0.0376731 s, 0.0 kB/s
DEAD
generic_04 : [PASS]
Ming Lei [Wed, 16 Apr 2025 03:54:38 +0000 (11:54 +0800)]
ublk: move device reset into ublk_ch_release()
ublk_ch_release() is called after ublk char device is closed, when all
uring_cmd are done, so it is perfect fine to move ublk device reset to
ublk_ch_release() from ublk_ctrl_start_recovery().
This way can avoid to grab the exiting daemon task_struct too long.
However, reset of the following ublk IO flags has to be moved until ublk
io_uring queues are ready:
- ubq->canceling
For requeuing IO in case of ublk_nosrv_dev_should_queue_io() before device
is recovered
- ubq->fail_io
For failing IO in case of UBLK_F_USER_RECOVERY_FAIL_IO before device is
recovered
Ming Lei [Wed, 16 Apr 2025 03:54:37 +0000 (11:54 +0800)]
ublk: rely on ->canceling for dealing with ublk_nosrv_dev_should_queue_io
Now ublk deals with ublk_nosrv_dev_should_queue_io() by keeping request
queue as quiesced. This way is fragile because queue quiesce crosses syscalls
or process contexts.
Switch to rely on ubq->canceling for dealing with
ublk_nosrv_dev_should_queue_io(), because it has been used for this purpose
during io_uring context exiting, and it can be reused before recovering too.
In ublk_queue_rq(), the request will be added to requeue list without
kicking off requeue in case of ubq->canceling, and finally requests added in
requeue list will be dispatched from either ublk_stop_dev() or
ublk_ctrl_end_recovery().
Meantime we have to move reset of ubq->canceling from ublk_ctrl_start_recovery()
to ublk_ctrl_end_recovery(), when IO handling can be recovered completely.
Then blk_mq_quiesce_queue() and blk_mq_unquiesce_queue() are always used
in same context.
Ming Lei [Wed, 16 Apr 2025 03:54:36 +0000 (11:54 +0800)]
ublk: add ublk_force_abort_dev()
Add ublk_force_abort_dev() for handling ublk_nosrv_dev_should_queue_io()
in ublk_stop_dev(). Then queue quiesce and unquiesce can be paired in
single function.
Meantime not change device state to QUIESCED any more, since the disk is
going to be removed soon.
Most uring_cmds issued against ublk character devices are serialized
because each command affects only one queue, and there is an early check
which only allows a single task (the queue's ubq_daemon) to issue
uring_cmds against that queue. However, this mechanism does not work for
FETCH_REQs, since they are expected before ubq_daemon is set. Since
FETCH_REQs are only used at initialization and not in the fast path,
serialize them using the per-ublk-device mutex. This fixes a number of
data races that were previously possible if a badly behaved ublk server
decided to issue multiple FETCH_REQs against the same qid/tag
concurrently.
Reported-by: Caleb Sander Mateos <csander@purestorage.com> Signed-off-by: Uday Shankar <ushankar@purestorage.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250416035444.99569-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Sat, 12 Apr 2025 02:30:24 +0000 (10:30 +0800)]
selftests: ublk: set queue pthread's cpu affinity
In NUMA machine, ublk IO performance is very sensitive with queue
pthread's affinity setting.
Retrieve queue's affinity and select the 1st cpu as queue thread's sched
affinity, and it is observed that single cpu task affinity can get
stable & good performance if client application is put on proper cpu.
Dump this info when adding one ublk device. Use shmem to communicate
queue's tid between parent and daemon.
Ming Lei [Sat, 12 Apr 2025 02:30:20 +0000 (10:30 +0800)]
selftests: ublk: make sure _add_ublk_dev can return in sub-shell
Detach ublk daemon from the starting process completely by double-fork and
clearing its process group, so that `_add_ublk_dev` can return from sub-shell.
Then it is more friendly for writing shell test script for adding/recovering
ublk device.
Ming Lei [Sat, 12 Apr 2025 02:30:18 +0000 (10:30 +0800)]
selftests: ublk: add io_uring uapi header
Add io_uring UAPI header so that ublk can work with latest uapi
definition.
Fix the following build failure:
stripe.c: In function ‘stripe_to_uring_op’:
stripe.c:120:29: error: ‘IORING_OP_READV_FIXED’ undeclared (first use in this function); did you mean ‘IORING_OP_READ_FIXED’?
120 | return zc ? IORING_OP_READV_FIXED : IORING_OP_READV;
| ^~~~~~~~~~~~~~~~~~~~~
| IORING_OP_READ_FIXED
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Fixes: 57ed58c13256 ("selftests: ublk: enable zero copy for stripe target") Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250412023035.2649275-3-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jakub Kicinski [Tue, 15 Apr 2025 15:15:52 +0000 (08:15 -0700)]
net: don't try to ops lock uninitialized devs
We need to be careful when operating on dev while in rtnl_create_link().
Some devices (vxlan) initialize netdev_ops in ->newlink, so later on.
Avoid using netdev_lock_ops(), the device isn't registered so we
cannot legally call its ops or generate any notifications for it.
netdev_ops_assert_locked_or_invisible() is safe to use, it checks
registration status first.
Reported-by: syzbot+de1c7d68a10e3f123bdd@syzkaller.appspotmail.com Fixes: 04efcee6ef8d ("net: hold instance lock during NETDEV_CHANGE") Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250415151552.768373-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ptp: ocp: fix start time alignment in ptp_ocp_signal_set
In ptp_ocp_signal_set, the start time for periodic signals is not
aligned to the next period boundary. The current code rounds up the
start time and divides by the period but fails to multiply back by
the period, causing misaligned signal starts. Fix this by multiplying
the rounded-up value by the period to ensure the start time is the
closest next period.
Fixes: 4bd46bb037f8e ("ptp: ocp: Use DIV64_U64_ROUND_UP for rounding.") Signed-off-by: Sagi Maimon <maimon.sagi@gmail.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20250415053131.129413-1-maimon.sagi@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 17 Apr 2025 01:14:45 +0000 (18:14 -0700)]
Merge branch 'collection-of-dsa-bug-fixes'
Vladimir Oltean says:
====================
Collection of DSA bug fixes
Prompted by Russell King's 3 DSA bug reports from Friday (linked in
their respective patches: 1, 2 and 3), I am providing fixes to those, as
well as flushing the queue with 2 other bug fixes I had.
1: fix NULL pointer dereference during mv88e6xxx driver unbind, on old
switch models which lack PVT and/or STU. Seen on the ZII dev board
rev B.
2: fix failure to delete bridge port VLANs on old mv88e6xxx chips which
lack STU. Seen on the same board.
3: fix WARN_ON() and resource leak in DSA core on driver unbind. Seen on
the same board but is a much more widespread issue.
4: fix use-after-free during probing of DSA trees with >= 3 switches,
if -EPROBE_DEFER exists. In principle issue also exists for the ZII
board, I reproduced on Turris MOX.
5: fix incorrect use of refcount API in DSA core for those switches
which use tag_8021q (felix, sja1105, vsc73xx). Returning an error
when attempting to delete a tag_8021q VLAN prints a WARN_ON(), which
is harmless but might be problematic with CONFIG_PANIC_ON_OOPS.
====================
Vladimir Oltean [Mon, 14 Apr 2025 21:30:20 +0000 (00:30 +0300)]
net: dsa: avoid refcount warnings when ds->ops->tag_8021q_vlan_del() fails
This is very similar to the problem and solution from commit 232deb3f9567 ("net: dsa: avoid refcount warnings when
->port_{fdb,mdb}_del returns error"), except for the
dsa_port_do_tag_8021q_vlan_del() operation.
Vladimir Oltean [Mon, 14 Apr 2025 21:30:01 +0000 (00:30 +0300)]
net: dsa: free routing table on probe failure
If complete = true in dsa_tree_setup(), it means that we are the last
switch of the tree which is successfully probing, and we should be
setting up all switches from our probe path.
After "complete" becomes true, dsa_tree_setup_cpu_ports() or any
subsequent function may fail. If that happens, the entire tree setup is
in limbo: the first N-1 switches have successfully finished probing
(doing nothing but having allocated persistent memory in the tree's
dst->ports, and maybe dst->rtable), and switch N failed to probe, ending
the tree setup process before anything is tangible from the user's PoV.
If switch N fails to probe, its memory (ports) will be freed and removed
from dst->ports. However, the dst->rtable elements pointing to its ports,
as created by dsa_link_touch(), will remain there, and will lead to
use-after-free if dereferenced.
If dsa_tree_setup_switches() returns -EPROBE_DEFER, which is entirely
possible because that is where ds->ops->setup() is, we get a kasan
report like this:
==================================================================
BUG: KASAN: slab-use-after-free in mv88e6xxx_setup_upstream_port+0x240/0x568
Read of size 8 at addr ffff000004f56020 by task kworker/u8:3/42
The simplest way to fix the bug is to delete the routing table in its
entirety. dsa_tree_setup_routing_table() has no problem in regenerating
it even if we deleted links between ports other than those of switch N,
because dsa_link_touch() first checks whether the port pair already
exists in dst->rtable, allocating if not.
The deletion of the routing table in its entirety already exists in
dsa_tree_teardown(), so refactor that into a function that can also be
called from the tree setup error path.
In my analysis of the commit to blame, it is the one which added
dsa_link elements to dst->rtable. Prior to that, each switch had its own
ds->rtable which is freed when the switch fails to probe. But the tree
is potentially persistent memory.
Vladimir Oltean [Mon, 14 Apr 2025 21:29:30 +0000 (00:29 +0300)]
net: dsa: clean up FDB, MDB, VLAN entries on unbind
As explained in many places such as commit b117e1e8a86d ("net: dsa:
delete dsa_legacy_fdb_add and dsa_legacy_fdb_del"), DSA is written given
the assumption that higher layers have balanced additions/deletions.
As such, it only makes sense to be extremely vocal when those
assumptions are violated and the driver unbinds with entries still
present.
But Ido Schimmel points out a very simple situation where that is wrong:
https://lore.kernel.org/netdev/ZDazSM5UsPPjQuKr@shredder/
(also briefly discussed by me in the aforementioned commit).
Basically, while the bridge bypass operations are not something that DSA
explicitly documents, and for the majority of DSA drivers this API
simply causes them to go to promiscuous mode, that isn't the case for
all drivers. Some have the necessary requirements for bridge bypass
operations to do something useful - see dsa_switch_supports_uc_filtering().
Although in tools/testing/selftests/net/forwarding/local_termination.sh,
we made an effort to popularize better mechanisms to manage address
filters on DSA interfaces from user space - namely macvlan for unicast,
and setsockopt(IP_ADD_MEMBERSHIP) - through mtools - for multicast, the
fact is that 'bridge fdb add ... self static local' also exists as
kernel UAPI, and might be useful to someone, even if only for a quick
hack.
It seems counter-productive to block that path by implementing shim
.ndo_fdb_add and .ndo_fdb_del operations which just return -EOPNOTSUPP
in order to prevent the ndo_dflt_fdb_add() and ndo_dflt_fdb_del() from
running, although we could do that.
Accepting that cleanup is necessary seems to be the only option.
Especially since we appear to be coming back at this from a different
angle as well. Russell King is noticing that the WARN_ON() triggers even
for VLANs:
https://lore.kernel.org/netdev/Z_li8Bj8bD4-BYKQ@shell.armlinux.org.uk/
What happens in the bug report above is that dsa_port_do_vlan_del() fails,
then the VLAN entry lingers on, and then we warn on unbind and leak it.
This is not a straight revert of the blamed commit, but we now add an
informational print to the kernel log (to still have a way to see
that bugs exist), and some extra comments gathered from past years'
experience, to justify the logic.
Vladimir Oltean [Mon, 14 Apr 2025 21:29:13 +0000 (00:29 +0300)]
net: dsa: mv88e6xxx: fix -ENOENT when deleting VLANs and MST is unsupported
Russell King reports that on the ZII dev rev B, deleting a bridge VLAN
from a user port fails with -ENOENT:
https://lore.kernel.org/netdev/Z_lQXNP0s5-IiJzd@shell.armlinux.org.uk/
This comes from mv88e6xxx_port_vlan_leave() -> mv88e6xxx_mst_put(),
which tries to find an MST entry in &chip->msts associated with the SID,
but fails and returns -ENOENT as such.
But we know that this chip does not support MST at all, so that is not
surprising. The question is why does the guard in mv88e6xxx_mst_put()
not exit early:
if (!sid)
return 0;
And the answer seems to be simple: the sid comes from vlan.sid which
supposedly was previously populated by mv88e6xxx_vtu_get().
But some chip->info->ops->vtu_getnext() implementations do not populate
vlan.sid, for example see mv88e6185_g1_vtu_getnext(). In that case,
later in mv88e6xxx_port_vlan_leave() we are using a garbage sid which is
just residual stack memory.
Testing for sid == 0 covers all cases of a non-bridge VLAN or a bridge
VLAN mapped to the default MSTI. For some chips, SID 0 is valid and
installed by mv88e6xxx_stu_setup(). A chip which does not support the
STU would implicitly only support mapping all VLANs to the default MSTI,
so although SID 0 is not valid, it would be sufficient, if we were to
zero-initialize the vlan structure, to fix the bug, due to the
coincidence that a test for vlan.sid == 0 already exists and leads to
the same (correct) behavior.
Another option which would be sufficient would be to add a test for
mv88e6xxx_has_stu() inside mv88e6xxx_mst_put(), symmetric to the one
which already exists in mv88e6xxx_mst_get(). But that placement means
the caller will have to dereference vlan.sid, which means it will access
uninitialized memory, which is not nice even if it ignores it later.
So we end up making both modifications, in order to not rely just on the
sid == 0 coincidence, but also to avoid having uninitialized structure
fields which might get temporarily accessed.
Vladimir Oltean [Mon, 14 Apr 2025 21:28:50 +0000 (00:28 +0300)]
net: dsa: mv88e6xxx: avoid unregistering devlink regions which were never registered
Russell King reports that a system with mv88e6xxx dereferences a NULL
pointer when unbinding this driver:
https://lore.kernel.org/netdev/Z_lRkMlTJ1KQ0kVX@shell.armlinux.org.uk/
The crash seems to be in devlink_region_destroy(), which is not NULL
tolerant but is given a NULL devlink global region pointer.
At least on some chips, some devlink regions are conditionally registered
since the blamed commit, see mv88e6xxx_setup_devlink_regions_global():
if (cond && !cond(chip))
continue;
These are MV88E6XXX_REGION_STU and MV88E6XXX_REGION_PVT. If the chip
does not have an STU or PVT, it should crash like this.
To fix the issue, avoid unregistering those regions which are NULL, i.e.
were skipped at mv88e6xxx_setup_devlink_regions_global() time.
Fixes: 836021a2d0e0 ("net: dsa: mv88e6xxx: Export cross-chip PVT as devlink region") Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250414212850.2953957-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: txgbe: fix memory leak in txgbe_probe() error path
When txgbe_sw_init() is called, memory is allocated for wx->rss_key
in wx_init_rss_key(). However, in txgbe_probe() function, the subsequent
error paths after txgbe_sw_init() don't free the rss_key. Fix that by
freeing it in error path along with wx->mac_table.
Also change the label to which execution jumps when txgbe_sw_init()
fails, because otherwise, it could lead to a double free for rss_key,
when the mac_table allocation fails in wx_sw_init().
Jonas Gorski [Mon, 14 Apr 2025 20:00:20 +0000 (22:00 +0200)]
net: bridge: switchdev: do not notify new brentries as changed
When adding a bridge vlan that is pvid or untagged after the vlan has
already been added to any other switchdev backed port, the vlan change
will be propagated as changed, since the flags change.
This causes the vlan to not be added to the hardware for DSA switches,
since the DSA handler ignores any vlans for the CPU or DSA ports that
are changed.
E.g. the following order of operations would work:
$ ip link add swbridge type bridge vlan_filtering 1 vlan_default_pvid 0
$ ip link set lan1 master swbridge
$ bridge vlan add dev swbridge vid 1 pvid untagged self
$ bridge vlan add dev lan1 vid 1 pvid untagged
but this order would break:
$ ip link add swbridge type bridge vlan_filtering 1 vlan_default_pvid 0
$ ip link set lan1 master swbridge
$ bridge vlan add dev lan1 vid 1 pvid untagged
$ bridge vlan add dev swbridge vid 1 pvid untagged self
Additionally, the vlan on the bridge itself would become undeletable:
$ bridge vlan
port vlan-id
lan1 1 PVID Egress Untagged
swbridge 1 PVID Egress Untagged
$ bridge vlan del dev swbridge vid 1 self
$ bridge vlan
port vlan-id
lan1 1 PVID Egress Untagged
swbridge 1 Egress Untagged
since the vlan was never added to DSA's vlan list, so deleting it will
cause an error, causing the bridge code to not remove it.
Fix this by checking if flags changed only for vlans that are already
brentry and pass changed as false for those that become brentries, as
these are a new vlan (member) from the switchdev point of view.
Since *changed is set to true for becomes_brentry = true regardless of
would_change's value, this will not change any rtnetlink notification
delivery, just the value passed on to switchdev in vlan->changed.
Fixes: 8d23a54f5bee ("net: bridge: switchdev: differentiate new VLANs from changed ones") Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20250414200020.192715-1-jonas.gorski@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jonas Gorski [Mon, 14 Apr 2025 20:04:34 +0000 (22:04 +0200)]
net: b53: enable BPDU reception for management port
For STP to work, receiving BPDUs is essential, but the appropriate bit
was never set. Without GC_RX_BPDU_EN, the switch chip will filter all
BPDUs, even if an appropriate PVID VLAN was setup.
====================
ynl: avoid leaks in attr override and spec fixes for C
The C rt-link work revealed more problems in existing codegen
and classic netlink specs.
Patches 1 - 4 fix issues with the codegen. Patches 1 and 2 are
pre-requisites for patch 3. Patch 3 fixes leaking memory if user
tries to override already set attr. Patch 4 validates attrs in case
kernel sends something we don't expect.
Remaining patches fix and align the specs. Patch 5 changes nesting,
the rest are naming adjustments.
====================
Jakub Kicinski [Mon, 14 Apr 2025 21:18:51 +0000 (14:18 -0700)]
netlink: specs: rt-neigh: prefix struct nfmsg members with ndm
Attach ndm- to all members of struct nfmsg. We could possibly
use name-prefix just for C, but I don't think we have any precedent
for using name-prefix on structs, and other rtnetlink sub-specs
give full names for fixed header struct members.
Fixes: bc515ed06652 ("netlink: specs: Add a spec for neighbor tables in rtnetlink") Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250414211851.602096-9-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MCTP attribute naming is inconsistent. In C we have:
IFLA_MCTP_NET,
IFLA_MCTP_PHYS_BINDING,
^^^^
but in YAML:
- mctp-net
- phys-binding
^
no "mctp"
It's unclear whether the "mctp" part of the name is supposed
to be a prefix or part of attribute name. Make it a prefix,
seems cleaner, even tho technically phys-binding was added later.
Fixes: b2f63d904e72 ("doc/netlink: Add spec for rt link messages") Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250414211851.602096-8-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some attribute names diverge in very minor ways from the C names.
These are most likely typos, and they prevent the C codegen from
working.
Fixes: bc515ed06652 ("netlink: specs: Add a spec for neighbor tables in rtnetlink") Fixes: b2f63d904e72 ("doc/netlink: Add spec for rt link messages") Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250414211851.602096-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 14 Apr 2025 21:18:48 +0000 (14:18 -0700)]
netlink: specs: rt-link: add an attr layer around alt-ifname
alt-ifname attr is directly placed in requests (as an alternative
to ifname) but in responses its wrapped up in IFLA_PROP_LIST
and only there is may be multi-attr. See rtnl_fill_prop_list().
Fixes: b2f63d904e72 ("doc/netlink: Add spec for rt link messages") Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250414211851.602096-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 14 Apr 2025 21:18:47 +0000 (14:18 -0700)]
tools: ynl-gen: make sure we validate subtype of array-nest
ArrayNest AKA indexed-array support currently skips inner type
validation. We count the attributes and then we parse them,
make sure we call validate, too. Otherwise buggy / unexpected
kernel response may lead to crashes.
Fixes: be5bea1cc0bf ("net: add basic C code generators for Netlink") Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250414211851.602096-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 14 Apr 2025 21:18:46 +0000 (14:18 -0700)]
tools: ynl-gen: individually free previous values on double set
When user calls request_attrA_set() multiple times (for the same
attribute), and attrA is of type which allocates memory -
we try to free the previously associated values. For array
types (including multi-attr) we have only freed the array,
but the array may have contained pointers.
Refactor the code generation for free attr and reuse the generated
lines in setters to flush out the previous state. Since setters
are static inlines in the header we need to add forward declarations
for the free helpers of pure nested structs. Track which types get
used by arrays and include the right forwad declarations.
At least ethtool string set and bit set would not be freed without
this. Tho, admittedly, overriding already set attribute twice is likely
a very very rare thing to do.
Fixes: be5bea1cc0bf ("net: add basic C code generators for Netlink") Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250414211851.602096-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 14 Apr 2025 21:18:45 +0000 (14:18 -0700)]
tools: ynl-gen: move local vars after the opening bracket
The "function writing helper" tries to put local variables
between prototype and the opening bracket. Clearly wrong,
but up until now nothing actually uses it to write local
vars so it wasn't noticed.
Jakub Kicinski [Mon, 14 Apr 2025 21:18:44 +0000 (14:18 -0700)]
tools: ynl-gen: don't declare loop iterator in place
The codegen tries to follow the "old" C style and declare loop
iterators at the start of the block / function. Only nested
request handling breaks this style, so adjust it.
cxgb4: fix memory leak in cxgb4_init_ethtool_filters() error path
In the for loop used to allocate the loc_array and bmap for each port, a
memory leak is possible when the allocation for loc_array succeeds,
but the allocation for bmap fails. This is because when the control flow
goes to the label free_eth_finfo, only the allocations starting from
(i-1)th iteration are freed.
Fix that by freeing the loc_array in the bmap allocation error path.
Fixes: d915c299f1da ("cxgb4: add skeleton for ethtool n-tuple filters") Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250414170649.89156-1-abdun.nihaal@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Avoid double-copying of string literals. Use a "const char *" for each
string instead of copying from .rodata into stack and then into the skb.
We can go directly from .rodata to the skb.
This also works around a Clang bug (that has since been fixed[1]).
Bluetooth: l2cap: Process valid commands in too long frame
This is required for passing PTS test cases:
- L2CAP/COS/CED/BI-14-C
Multiple Signaling Command in one PDU, Data Truncated, BR/EDR,
Connection Request
- L2CAP/COS/CED/BI-15-C
Multiple Signaling Command in one PDU, Data Truncated, BR/EDR,
Disconnection Request
The test procedure defined in L2CAP.TS.p39 for both tests is:
1. The Lower Tester sends a C-frame to the IUT with PDU Length set
to 8 and Channel ID set to the correct signaling channel for the
logical link. The Information payload contains one L2CAP_ECHO_REQ
packet with Data Length set to 0 with 0 octets of echo data and
one command packet and Data Length set as specified in Table 4.6
and the correct command data.
2. The IUT sends an L2CAP_ECHO_RSP PDU to the Lower Tester.
3. Perform alternative 3A, 3B, 3C, or 3D depending on the IUT’s
response.
Alternative 3A (IUT terminates the link):
3A.1 The IUT terminates the link.
3A.2 The test ends with a Pass verdict.
Alternative 3B (IUT discards the frame):
3B.1 The IUT does not send a reply to the Lower Tester.
Alternative 3C (IUT rejects PDU):
3C.1 The IUT sends an L2CAP_COMMAND_REJECT_RSP PDU to the
Lower Tester.
Alternative 3D (Any other IUT response):
3D.1 The Upper Tester issues a warning and the test ends.
4. The Lower Tester sends a C-frame to the IUT with PDU Length set
to 4 and Channel ID set to the correct signaling channel for the
logical link. The Information payload contains Data Length set to
0 with an L2CAP_ECHO_REQ packet with 0 octets of echo data.
5. The IUT sends an L2CAP_ECHO_RSP PDU to the Lower Tester.
With expected outcome:
In Steps 2 and 5, the IUT responds with an L2CAP_ECHO_RSP.
In Step 3A.1, the IUT terminates the link.
In Step 3B.1, the IUT does not send a reply to the Lower Tester.
In Step 3C.1, the IUT rejects the PDU.
In Step 3D.1, the IUT sends any valid response.
Currently PTS fails with the following logs:
Failed to receive ECHO RESPONSE.
And HCI logs:
> ACL Data RX: Handle 11 flags 0x02 dlen 20
L2CAP: Information Response (0x0b) ident 2 len 12
Type: Fixed channels supported (0x0003)
Result: Success (0x0000)
Channels: 0x000000000000002e
L2CAP Signaling (BR/EDR)
Connectionless reception
AMP Manager Protocol
L2CAP Signaling (LE)
> ACL Data RX: Handle 11 flags 0x02 dlen 13
frame too long
08 01 00 00 08 02 01 00 aa .........
Cc: stable@vger.kernel.org Signed-off-by: Frédéric Danis <frederic.danis@collabora.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Martin K. Petersen [Wed, 16 Apr 2025 20:04:10 +0000 (16:04 -0400)]
block: integrity: Do not call set_page_dirty_lock()
Placing multiple protection information buffers inside the same page
can lead to oopses because set_page_dirty_lock() can't be called from
interrupt context.
Since a protection information buffer is not backed by a file there is
no point in setting its page dirty, there is nothing to synchronize.
Drop the call to set_page_dirty_lock() and remove the last argument to
bio_integrity_unpin_bvec().
Cc: stable@vger.kernel.org Fixes: 492c5d455969 ("block: bio-integrity: directly map user buffers") Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/yq1v7r3ev9g.fsf@ca-mkp.ca.oracle.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Steven Rostedt [Tue, 15 Apr 2025 01:09:00 +0000 (21:09 -0400)]
selftests/ftrace: Differentiate bash and dash in dynevent_limitations.tc
bash and dash evaluate variables differently.
dash will evaluate '\\' every time it is read whereas bash does not.
TEST_STRING="$TEST_STRING \\$i"
echo $TEST_STRING
With i=123
On bash, that will print "\123"
but on dash, that will print the escape sequence of \123 as the \ will be
interpreted again in the echo.
The dynevent_limitations.tc test created a very large list of arguments to
test the maximum number of arguments to pass to the dynamic events file.
It had a loop of:
TEST_STRING=$1
# Acceptable
for i in `seq 1 $MAX_ARGS`; do
TEST_STRING="$TEST_STRING \\$i"
done
echo "$TEST_STRING" >> dynamic_events
This worked fine on bash, but when run on dash it failed.
This was due to dash interpreting the "\\$i" twice. Once when it was
assigned to TEST_STRING and a second time with the echo $TEST_STRING.
bash does not process the backslash more than the first time.
To solve this, assign a double backslash to a variable "bs" and then echo
it to "ts". If "ts" changes, it is dash, if not, it is bash. Then update
"bs" accordingly, and use that to assign TEST_STRING.
Now this could possibly just check if "$BASH" is defined or not, but this
is testing if the issue exists and not just which shell is being used.
Link: https://lore.kernel.org/r/20250414210900.4de5e8b9@gandalf.local.home Fixes: 581a7b26ab364 ("selftests/ftrace: Add dynamic events argument limitation test case") Reported-by: Mark Brown <broonie@kernel.org> Closes: https://lore.kernel.org/all/350786cc-9e40-4396-ab95-4f10d69122fb@sirena.org.uk/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
projects / nvme.git / log