Zack Rusin [Tue, 31 Jan 2023 03:35:41 +0000 (22:35 -0500)]
drm/vmwgfx: Abstract placement selection
Problem with explicit placement selection in vmwgfx is that by the time
the buffer object needs to be validated the information about which
placement was supposed to be used is lost. To workaround this the driver
had a bunch of state in various places e.g. as_mob or cpu_blit to
somehow convey the information on which placement was intended.
Fix it properly by allowing the buffer objects to hold their preferred
placement so it can be reused whenever needed. This makes the entire
validation pipeline a lot easier both to understand and maintain.
Zack Rusin [Tue, 31 Jan 2023 03:35:38 +0000 (22:35 -0500)]
drm/vmwgfx: Simplify fb pinning
Only the legacy display unit requires pinning of the fb memory in vram.
Both the screen objects and screen targets can present from any buffer.
That makes the pinning abstraction pointless. Simplify all of the code
and move it to the legacy display unit, the only place that needs it.
Zack Rusin [Tue, 31 Jan 2023 03:35:37 +0000 (22:35 -0500)]
drm/vmwgfx: Rename vmw_buffer_object to vmw_bo
The rest of the drivers which are using ttm have mostly standardized on
driver_prefix_bo as the name for subclasses of the TTM buffer object.
Make vmwgfx match the rest of the drivers and follow the same naming
semantics.
This is especially clear given that the name of the file in which the
object was defined is vmw_bo.c.
Zack Rusin [Tue, 31 Jan 2023 03:35:35 +0000 (22:35 -0500)]
drm/vmwgfx: Use the common gem mmap instead of the custom code
Before vmwgfx supported gem it needed to implement the entire mmap logic
explicitly. With GEM support that's not needed and the generic code
can be used by simply setting the vm_ops to vmwgfx specific ones on the
gem object itself.
Removes a lot of code from vmwgfx without any functional difference.
Asahi Lina [Sun, 5 Feb 2023 12:51:24 +0000 (21:51 +0900)]
drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()
Other functions touching shmem->sgt take the pages lock, so do that here
too. drm_gem_shmem_get_pages() & co take the same lock, so move to the
_locked() variants to avoid recursive locking.
Discovered while auditing locking to write the Rust abstractions.
Fixes: 2194a63a818d ("drm: Add library for shmem backed GEM objects") Fixes: 4fa3d66f132b ("drm/shmem: Do dma_unmap_sg before purging pages") Signed-off-by: Asahi Lina <lina@asahilina.net> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230205125124.2260-1-lina@asahilina.net
John Keeping [Fri, 20 Jan 2023 11:43:12 +0000 (11:43 +0000)]
drm/bridge: panel: Set orientation on panel_bridge connector
Commit 15b9ca1641f0 ("drm: Config orientation property if panel provides
it") added a helper to set the panel orientation early but only
connected this for drm_bridge_connector, which constructs a panel bridge
with DRM_BRIDGE_ATTACH_NO_CONNECTOR and creates the connector itself.
When the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag is not specified and the
panel_bridge creates its own connector the orientation is not set unless
the panel does it in .get_modes which is too late and leads to a warning
splat from __drm_mode_object_add() because the device is already
registered.
Call the necessary function to set add the orientation property when the
connector is created so that it is available before the device is
registered.
Matthew Auld [Mon, 30 Jan 2023 10:12:27 +0000 (10:12 +0000)]
drm/ttm: clear the ttm_tt when bo->resource is NULL
In the next few patches, when initially creating a ttm BO, the
bo->resource is NULL, and the driver is then expected to handle the
initial dummy move. However, if this is created as a system resource
the first ttm_tt we create will always have the clear value set to
false. Previously the initial ttm_tt would be created in
ttm_bo_validate() with the clear parameter always set to true.
Matthew Auld [Mon, 30 Jan 2023 12:06:32 +0000 (12:06 +0000)]
drm/i915/ttm: audit remaining bo->resource
In the near future TTM will have NULL bo->resource when the object is
initially created, plus after calling into pipeline-gutting. Try to
handle the remaining cases. In practice NULL bo->resource should be
taken to mean swapped-out or purged object.
v2 (Andrzej):
- Rather make i915_ttm_cpu_maps_iomem() return false with NULL
resource.
References: 516198d317d8 ("drm/i915: audit bo->resource usage v3") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130101230.25347-2-matthew.auld@intel.com Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Acked-by: Christian König <ckoenig.leichtzumerken@gmail.com> Signed-off-by: Christian König <christian.koenig@amd.com>
Matthew Auld [Mon, 30 Jan 2023 12:06:31 +0000 (12:06 +0000)]
drm/i915/ttm: fix sparse warning
Sparse complains with:
drivers/gpu/drm/i915/gem/i915_gem_ttm.c:1066:21: sparse:
expected restricted vm_fault_t [assigned] [usertype] ret
drivers/gpu/drm/i915/gem/i915_gem_ttm.c:1066:21: sparse: got int
Fixes: 516198d317d8 ("drm/i915: audit bo->resource usage v3") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130101230.25347-1-matthew.auld@intel.com Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Acked-by: Christian König <ckoenig.leichtzumerken@gmail.com> Signed-off-by: Christian König <christian.koenig@amd.com>
Andrzej Kacprowski [Thu, 2 Feb 2023 09:21:12 +0000 (10:21 +0100)]
accel/ivpu: Send VPU_JSM_MSG_CONTEXT_DELETE when deleting context
The VPU_JSM_MSG_CONTEXT_DELETE will remove any resources associated
with the SSID, that included any blobs create by the user space
application.
The command can also remove doorbell registrations, but since this
does not work in HW scheduling case, we do not depend on this
capability and unregister the doorbells explicitly.
John Keeping [Thu, 10 Nov 2022 17:24:14 +0000 (17:24 +0000)]
drm/rockchip: avoid duplicate mappings for IOMMU devices
If a buffer is allocated with alloc_kmap, then it is vmap'd on creation
and there is no reason to map it again in rockchip_gem_prime_vmap() when
the existing mapping can be used.
Brian Norris [Mon, 31 Oct 2022 17:16:01 +0000 (10:16 -0700)]
drm/rockchip: vop: Quiet always-warning AFBC log
The downstream code from which this was derived didn't ever run through
this 'switch' block with non-AFBC formats, but the upstream code does --
we use this function to probe whether a given format is supported.
Demote the warning to eliminate this sort of warning seen on every
boot:
And make it warn more than once, because if we *actually* care to see
what formats we're probing/rejecting and for what reasons, we probably
care about more than just the first message.
Drop the comment, because one of the two *is* commonly reachable.
And lastly, drop the unreachable return; we'd do better to let the
compiler complain if we start hitting this unexpectedly.
Michael Riesch [Tue, 24 Jan 2023 05:47:04 +0000 (06:47 +0100)]
drm/rockchip: vop2: use symmetric function pair vop2_{create,destroy}_crtcs
Let the function name vop2_create_crtcs reflect that the function creates
multiple CRTCS. Also, use a symmetric function pair to create and destroy
the CRTCs and the corresponding planes.
Michael Riesch [Tue, 24 Jan 2023 05:47:03 +0000 (06:47 +0100)]
drm/rockchip: rgb: add video_port parameter to init function
The VOP2 driver has more than one video port, hence the hard-coded
port id will not work anymore. Add an extra parameter for the video
port id to the rockchip_rgb_init function.
Michael Riesch [Tue, 24 Jan 2023 05:47:02 +0000 (06:47 +0100)]
drm/rockchip: rgb: embed drm_encoder into rockchip_encoder
Commit 540b8f271e53 ("drm/rockchip: Embed drm_encoder into
rockchip_decoder") provides the means to pass the endpoint ID to the
VOP2 driver, which sets the interface MUX accordingly. However, this
step has not yet been carried out for the RGB output block. Embed the
drm_encoder structure into the rockchip_encoder structure and set the
endpoint ID correctly.
The variable possible_crtcs is only initialized for primary and
overlay planes. Since the VOP2 driver only supports these plane
types at the moment, the current code is safe. However, in order
to provide a future-proof solution, fix the initialization of
the variable.
Deepak R Varma [Fri, 27 Jan 2023 20:51:26 +0000 (02:21 +0530)]
drm/arm/malidp: use sysfs_emit in show function callback
According to Documentation/filesystems/sysfs.rst, the show() callback
function of kobject attributes should strictly use sysfs_emit() instead
of sprintf() family functions.
Issue identified using the device_attr_show.cocci Coccinelle script.
Maíra Canal [Mon, 30 Jan 2023 12:55:55 +0000 (09:55 -0300)]
drm/format-helper: Use KUNIT_EXPECT_MEMEQ macro
Commit b8a926bea8b1 ("kunit: Introduce KUNIT_EXPECT_MEMEQ and
KUNIT_EXPECT_MEMNEQ macros") introduced a new macro to compare blocks of
memory and, if the test fails, print the result in a human-friendly
format. Therefore, use KUNIT_EXPECT_MEMEQ to compare memory blocks in
replacement of the KUNIT_EXPECT_EQ macro.
Stephen Boyd [Fri, 6 Jan 2023 03:01:08 +0000 (19:01 -0800)]
drm/panel: boe-tv101wum-nl6: Ensure DSI writes succeed during disable
The unprepare sequence has started to fail after moving to panel bridge
code in the msm drm driver (commit 007ac0262b0d ("drm/msm/dsi: switch to
DRM_PANEL_BRIDGE")). You'll see messages like this in the kernel logs:
panel-boe-tv101wum-nl6 ae94000.dsi.0: failed to set panel off: -22
This is because boe_panel_enter_sleep_mode() needs an operating DSI link
to set the panel into sleep mode. Performing those writes in the
unprepare phase of bridge ops is too late, because the link has already
been torn down by the DSI controller in post_disable, i.e. the PHY has
been disabled, etc. See dsi_mgr_bridge_post_disable() for more details
on the DSI .
Split the unprepare function into a disable part and an unprepare part.
For now, just the DSI writes to enter sleep mode are put in the disable
function. This fixes the panel off routine and keeps the panel happy.
My Wormdingler has an integrated touchscreen that stops responding to
touch if the panel is only half disabled too. This patch fixes it. And
finally, this saves power when the screen is off because without this
fix the regulators for the panel are left enabled when nothing is being
displayed on the screen.
Fixes: 007ac0262b0d ("drm/msm/dsi: switch to DRM_PANEL_BRIDGE") Fixes: a869b9db7adf ("drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel") Cc: yangcong <yangcong5@huaqin.corp-partner.google.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Jitao Shi <jitao.shi@mediatek.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Rob Clark <robdclark@chromium.org> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230106030108.2542081-1-swboyd@chromium.org
Arnd Bergmann [Thu, 26 Jan 2023 16:37:55 +0000 (17:37 +0100)]
accel/ivpu: avoid duplicate assignment
With extra warnings enabled, gcc warns about two assignments
of the same .mmap callback:
In file included from drivers/accel/ivpu/ivpu_drv.c:10:
include/drm/drm_accel.h:31:27: error: initialized field overwritten [-Werror=override-init]
31 | .mmap = drm_gem_mmap
| ^~~~~~~~~~~~
drivers/accel/ivpu/ivpu_drv.c:360:9: note: in expansion of macro 'DRM_ACCEL_FOPS'
360 | DRM_ACCEL_FOPS,
| ^~~~~~~~~~~~~~
Daniel Vetter [Tue, 31 Jan 2023 10:22:15 +0000 (11:22 +0100)]
Merge v6.2-rc6 into drm-next
Due to holidays we started -next with more -fixes in-flight than
usual, and people have been asking where they are. Backmerge to get
things better in sync.
Conflicts:
- Tiny conflict in drm_fbdev_generic.c between variable rename and
missing error handling that got added.
- Conflict in drm_fb_helper.c between the added call to vgaswitcheroo
in drm_fb_helper_single_fb_probe and a refactor patch that extracted
lots of helpers and incidentally removed the dev local variable.
Readd it to make things compile.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rayyan Ansari [Thu, 26 Jan 2023 18:24:34 +0000 (18:24 +0000)]
drm/simpledrm: Allow physical width and height configuration via panel node
Parse the width-mm and height-mm devicetree properties of the panel node,
and use this to set the DRM Display Mode instead of calculating it
based on a hardcoded DPI.
Arnd Bergmann [Fri, 27 Jan 2023 22:14:55 +0000 (23:14 +0100)]
accel: fix CONFIG_DRM dependencies
At the moment, accel drivers can be built-in even with CONFIG_DRM=m,
but this causes a link failure:
x86_64-linux-ld: drivers/accel/ivpu/ivpu_drv.o: in function `ivpu_dev_init':
ivpu_drv.c:(.text+0x1535): undefined reference to `drmm_kmalloc'
x86_64-linux-ld: ivpu_drv.c:(.text+0x1562): undefined reference to `drmm_kmalloc'
x86_64-linux-ld: drivers/accel/ivpu/ivpu_drv.o: in function `ivpu_remove':
ivpu_drv.c:(.text+0x1faa): undefined reference to `drm_dev_unregister'
x86_64-linux-ld: drivers/accel/ivpu/ivpu_drv.o: in function `ivpu_probe':
ivpu_drv.c:(.text+0x1fef): undefined reference to `__devm_drm_dev_alloc'
The problem is that DRM_ACCEL is a 'bool' symbol, so driver that
only depend on DRM_ACCEL but not also on DRM do not see the restriction
to =m configs.
To ensure that each accel driver has an implied dependency on CONFIG_DRM,
enclose the entire Kconfig file in an if/endif check.
Fixes: 8bf4889762a8 ("drivers/accel: define kconfig and register a new major") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230127221504.2522909-1-arnd@kernel.org
Once we create the handle, the handle owns the reference. Currently
nothing was doing anything with the shmem ptr after the handle was
created, but let's change drm_gem_shmem_create_with_handle() to not
return the pointer, so-as to not encourage problematic use of this
function in the future. As a bonus, it makes the code a bit cleaner.
Dave Airlie [Mon, 30 Jan 2023 03:35:56 +0000 (13:35 +1000)]
Merge tag 'drm-intel-next-2023-01-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
drm/i915 feature pull #2 v6.3:
Features and functionality:
- Enable HF-EEODB by switching HDMI, DP and LVDS to use struct drm_edid (Jani)
- Start using unversioned DMC firmware paths for new platforms (Gustavo)
Refactoring and cleanups:
- ELD refactor: Stop using hardware buffer, precompute ELD, and wire up ELD in
the state checker (Ville)
- Use generics for debugfs device parameters (Jani)
- DSB refactoring and fixes (Ville)
- Header refactoring, add new intel_display_limits.h (Jani)
- Split out GMCH code to a new file (Jani)
- Split out vblank code to a new file (Jani)
- i915_drv.h and struct drm_i915_private cleanups (Jani)
- Simplify FBC and DRRS debug attributes (Deepak R Varma)
- Remove some single-use macros (Rodrigo)
Fixes:
- Fix scaler limits for display versions 12 and 13 (Luca)
- Fix plane source size check for zero height (Drew Davenport)
- Implement PSR2 selective fetch workaround (Jouni)
- Expand a PSR workaound to more platforms and pipes (Jouni)
- Expand an HDMI infoframe workaround to all MTL steppings (Jouni)
- Enable PIPEDMC whenever its corresponding pipe is enabled (Imre)
Dave Airlie [Mon, 30 Jan 2023 02:43:10 +0000 (12:43 +1000)]
Merge tag 'drm-habanalabs-next-2023-01-26' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next
This tag contains habanalabs driver and accel changes for v6.3:
- Moved the driver to the accel subsystem. Currently only the files were
moved (including the uapi file which was also renamed). This doesn't
include registering to the accel subsystem. This will probably be only
in the next kernel version.
- In case of decoder error (axi error) in Gaudi2, we can now find the exact
IP that initiated the erroneous transaction and print the details for
better debug.
- Add more trace events. We now can trace mmio transactions and communication
with the preboot firmware.
- Add to Gaudi2 support for abrupt reset that is done by the firmware. This
was support so far only for Gaudi1.
- Add uAPI to flush memory transactions (to the device memory). This is
needed by the communications library in case of doing p2p with a host NIC
which access our HBM directly through the PCI BAR.
- Add uAPI to pass-through a request from user-space to firmware and get the
result back to user-space. This will allow the driver code to avoid the
need to add new packet (in the communication channel with the firmware) for
every new request type.
- Remove the option to export dma-buf by memory allocation handle in our uAPI.
This was planned for Gaudi2 but was never used. Instead, we will do export
by memory address (same as Gaudi1). In addition, we added the option to
specify an offset to the address. This is needed in Gaudi2 because there
the user allocates the entire HBM in one allocation, but would like to
export only small part of it.
- Multiple bug fixes, refactors and small optimizations.
Linus Torvalds [Sun, 29 Jan 2023 19:26:49 +0000 (11:26 -0800)]
Merge tag 'irq_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Borislav Petkov:
- Cleanup the firmware node for the new IRQ MSI domain properly, to
avoid leaking memory
* tag 'irq_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/msi: Free the fwnode created by msi_create_device_irq_domain()
Linus Torvalds [Sun, 29 Jan 2023 19:17:34 +0000 (11:17 -0800)]
Merge tag 'x86_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Start checking for -mindirect-branch-cs-prefix clang support too now
that LLVM 16 will support it
- Fix a NULL ptr deref when suspending with Xen PV
- Have a SEV-SNP guest check explicitly for features enabled by the
hypervisor and fail gracefully if some are unsupported by the guest
instead of failing in a non-obvious and hard-to-debug way
- Fix a MSI descriptor leakage under Xen
- Mark Xen's MSI domain as supporting MSI-X
- Prevent legacy PIC interrupts from being resent in software by
marking them level triggered, as they should be, which lead to a NULL
ptr deref
* tag 'x86_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/build: Move '-mindirect-branch-cs-prefix' out of GCC-only block
acpi: Fix suspend with Xen PV
x86/sev: Add SEV-SNP guest feature negotiation support
x86/pci/xen: Fixup fallout from the PCI/MSI overhaul
x86/pci/xen: Set MSI_FLAG_PCI_MSIX support in Xen MSI domain
x86/i8259: Mark legacy PIC interrupts with IRQ_LEVEL
Linus Torvalds [Sun, 29 Jan 2023 19:06:47 +0000 (11:06 -0800)]
Merge tag 'input-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- touchpads on HP 15-* laptops switched back to PS/2 emulation mode
- a quirk for Clevo PCX0DX/TUXEDO XP1511 to make sure keyboard is
responding after resume
* tag 'input-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - add Clevo PCX0DX to i8042 quirk table
Revert "Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode"
Linus Torvalds [Sun, 29 Jan 2023 18:47:22 +0000 (10:47 -0800)]
Merge tag 'cxl-fixes-for-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"A couple of fixes for bugs introduced during the merge window. One is
a regression, the other was a bug in the CXL AER handler:
- Fix a crash regression due to module load order of cxl_pmem.ko
We have got openSUSE reports (Link 1) for 6.1 kernel with khugepaged
stalling CPU for long periods of time. Investigation of tracepoint data
shows that compaction is stuck in repeating fast_find_migrateblock()
based migrate page isolation, and then fails to migrate all isolated
pages.
Commit 7efc3b726103 ("mm/compaction: fix set skip in fast_find_migrateblock")
was suspected as it was merged in 6.1 and in theory can indeed remove a
termination condition for fast_find_migrateblock() under certain
conditions, as it removes a place that always marks a scanned pageblock
from being re-scanned. There are other such places, but those can be
skipped under certain conditions, which seems to match the tracepoint
data.
Testing of revert also appears to have resolved the issue, thus revert
the commit until a more robust solution for the original problem is
developed.
It's also likely this will fix qemu stalls with 6.1 kernel reported in
Link 2, but that is not yet confirmed.
Linus Torvalds [Sat, 28 Jan 2023 18:52:51 +0000 (10:52 -0800)]
Merge tag '6.2-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull ksmbd server fixes from Steve French:
"Four smb3 server fixes, all also for stable:
- fix for signing bug
- fix to more strictly check packet length
- add a max connections parm to limit simultaneous connections
- fix error message flood that can occur with newer Samba xattr
format"
* tag '6.2-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: downgrade ndr version error message to debug
ksmbd: limit pdu length size according to connection status
ksmbd: do not sign response to session request for guest login
ksmbd: add max connections parameter
Linus Torvalds [Sat, 28 Jan 2023 00:16:57 +0000 (16:16 -0800)]
Merge tag 'block-6.2-2023-01-27' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Minor tweaks for this release:
- NVMe pull request via Christoph:
- Flush initial scan_work for async probe (Keith Busch)
- Fix passthrough csi check (Keith Busch)
- Fix nvme-fc initialization order (Ross Lagerwall)
- Fix for tearing down non-started device in ublk (Ming)"
* tag 'block-6.2-2023-01-27' of git://git.kernel.dk/linux:
block: ublk: move ublk_chr_class destroying after devices are removed
nvme: fix passthrough csi check
nvme-pci: flush initial scan_work for async probe
nvme-fc: fix initialization order
Linus Torvalds [Sat, 28 Jan 2023 00:15:06 +0000 (16:15 -0800)]
Merge tag 'io_uring-6.2-2023-01-27' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"Two small fixes for this release:
- Sanitize how async prep is done for drain requests, so we ensure
that it always gets done (Dylan)
- A ring provided buffer recycling fix for multishot receive (me)"
* tag 'io_uring-6.2-2023-01-27' of git://git.kernel.dk/linux:
io_uring: always prep_async for drain requests
io_uring/net: cache provided buffer group value for multishot receives
Linus Torvalds [Sat, 28 Jan 2023 00:03:32 +0000 (16:03 -0800)]
Merge tag 'trace-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix filter memory leak by calling ftrace_free_filter()
- Initialize trace_printk() earlier so that ftrace_dump_on_oops shows
data on early crashes.
- Update the outdated instructions in scripts/tracing/ftrace-bisect.sh
- Add lockdep_is_held() to fix lockdep warning
- Add allocation failure check in create_hist_field()
- Don't initialize pointer that gets set right away in enabled_monitors_write()
- Update MAINTAINER entries
- Fix help messages in Kconfigs
- Fix kernel-doc header for update_preds()
* tag 'trace-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Update MAINTAINERS file to add tree and mailing list
rv: remove redundant initialization of pointer ptr
ftrace: Maintain samples/ftrace
tracing/filter: fix kernel-doc warnings
lib: Kconfig: fix spellos
trace_events_hist: add check for return value of 'create_hist_field'
tracing/osnoise: Use built-in RCU list checking
tracing: Kconfig: Fix spelling/grammar/punctuation
ftrace/scripts: Update the instructions for ftrace-bisect.sh
tracing: Make sure trace_printk() can output as soon as it can be used
ftrace: Export ftrace_free_filter() to modules
Dave Airlie [Fri, 27 Jan 2023 02:15:13 +0000 (12:15 +1000)]
amdgpu: fix build on non-DCN platforms.
This fixes the build here locally on my 32-bit arm build.
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit f439a959dcfb6b39d6fd4b85ca1110a1d1de1587) Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Linus Torvalds [Fri, 27 Jan 2023 21:52:38 +0000 (13:52 -0800)]
Merge tag 'i2c-for-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A bunch of driver fixes with a tiny bit of new IDs"
* tag 'i2c-for-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: rk3x: fix a bunch of kernel-doc warnings
i2c: axxia: use 'struct' for kernel-doc notation
dt-bindings: i2c: renesas,rzv2m: Fix SoC specific string
i2c: mxs: suppress probe-deferral error message
i2c: designware-pci: Add new PCI IDs for AMD NAVI GPU
i2c: designware: Fix unbalanced suspended flag
i2c: designware: use casting of u64 in clock multiplication to avoid overflow
Linus Torvalds [Fri, 27 Jan 2023 21:47:40 +0000 (13:47 -0800)]
Merge tag 'gpio-fixes-for-v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix the -c option in the gpio-event-mode user-space example program
- fix the irq number translation in gpio-ep93xx and make its irqchip
immutable
- add a missing spin_unlock in error path in gpio-mxc
- fix a suspend breakage on System76 and Lenovo Gen2a introduced in
GPIO ACPI
* tag 'gpio-fixes-for-v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
tools: gpio: fix -c option of gpio-event-mon
gpio: ep93xx: remove unused variable
gpio: ep93xx: Make irqchip immutable
gpio: ep93xx: Fix port F hwirq numbers in handler
gpio: mxc: Unlock on error path in mxc_flip_edge()
gpiolib-acpi: Don't set GPIOs for wakeup in S3 mode
Linus Torvalds [Fri, 27 Jan 2023 21:43:46 +0000 (13:43 -0800)]
Merge tag 'regulator-fix-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"A fix for the DT binding documentation which dropped a property when
being converted to YAML format causing spurious errors validating
device trees for platforms using the device"
* tag 'regulator-fix-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: dt-bindings: samsung,s2mps14: add lost samsung,ext-control-gpios
Linus Torvalds [Fri, 27 Jan 2023 21:39:30 +0000 (13:39 -0800)]
Merge tag 'ovl-fixes-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Fix two bugs, a recent one introduced in the last cycle, and an older
one from v5.11"
* tag 'ovl-fixes-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: fail on invalid uid/gid mapping at copy up
ovl: fix tmpfile leak
Linus Torvalds [Fri, 27 Jan 2023 21:18:14 +0000 (13:18 -0800)]
Merge tag 'drm-fixes-2023-01-27' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Fairly small this week as well, i915 has a memory leak fix and some
minor changes, and amdgpu has some MST fixes, and some other minor
ones:
* tag 'drm-fixes-2023-01-27' of git://anongit.freedesktop.org/drm/drm:
amdgpu: fix build on non-DCN platforms.
drm/amd/display: Fix timing not changning when freesync video is enabled
drm/display/dp_mst: Correct the kref of port.
drm/amdgpu/display/mst: update mst_mgr relevant variable when long HPD
drm/amdgpu/display/mst: limit payload to be updated one by one
drm/amdgpu/display/mst: Fix mst_state->pbn_div and slot count assignments
drm/amdgpu: declare firmware for new MES 11.0.4
drm/amdgpu: enable imu firmware for GC 11.0.4
drm/amd/pm: add missing AllowIHInterrupt message mapping for SMU13.0.0
drm/amdgpu: remove unconditional trap enable on add gfx11 queues
drm/fb-helper: Use a per-driver FB deferred I/O handler
drm/fb-helper: Check fb_deferred_io_init() return value
drm/i915/selftest: fix intel_selftest_modify_policy argument types
drm/i915/mtl: Fix bcs default context
drm/i915: Fix a memory leak with reused mmap_offset
drm/drm_vma_manager: Add drm_vma_node_allow_once()
Linus Torvalds [Fri, 27 Jan 2023 21:11:19 +0000 (13:11 -0800)]
Merge tag 'acpi-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Add ACPI backlight handling quirks for 3 machines (Hans de Goede)"
* tag 'acpi-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: video: Add backlight=native DMI quirk for Asus U46E
ACPI: video: Add backlight=native DMI quirk for HP EliteBook 8460p
ACPI: video: Add backlight=native DMI quirk for HP Pavilion g6-1d80nr
Linus Torvalds [Fri, 27 Jan 2023 21:01:36 +0000 (13:01 -0800)]
Merge tag 'thermal-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Add locking to the Intel int340x thermal control driver to prevent its
thermal zone callbacks from racing with firmware-induced thermal trip
point updates (Srinivas Pandruvada, Rafael Wysocki)"
* tag 'thermal-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: int340x: Add locking to int340x_thermal_get_trip_type()
thermal: intel: int340x: Protect trip temperature from concurrent updates
Linus Torvalds [Fri, 27 Jan 2023 20:52:45 +0000 (12:52 -0800)]
Merge tag 'riscv-for-linus-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A few DT bindings fixes to more closely align the ISA string
requirements between the bindings and the ISA manual.
- A handful of build error/warning fixes.
- A fix to move init_cpu_topology() later in the boot flow, so it can
allocate memory.
- The IRC channel is now in the MAINTAINERS file, so it's easier to
find.
* tag 'riscv-for-linus-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Move call to init_cpu_topology() to later initialization stage
riscv/kprobe: Fix instruction simulation of JALR
riscv: fix -Wundef warning for CONFIG_RISCV_BOOT_SPINWAIT
MAINTAINERS: add an IRC entry for RISC-V
RISC-V: fix compile error from deduplicated __ALTERNATIVE_CFG_2
dt-bindings: riscv: fix single letter canonical order
dt-bindings: riscv: fix underscore requirement for multi-letter extensions
Linus Torvalds [Fri, 27 Jan 2023 20:49:00 +0000 (12:49 -0800)]
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
- fix nommu assignment build warning
- fix -Wundef preprocessor warning
- reduce __thumb2__ definitions for crypto files that require it
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9287/1: Reduce __thumb2__ definition to crypto files that require it
ARM: 9284/1: include <asm/pgtable.h> from proc-macros.S to fix -Wundef warnings
ARM: 9280/1: mm: fix warning on phys_addr_t to void pointer assignment
Linus Torvalds [Fri, 27 Jan 2023 20:41:09 +0000 (12:41 -0800)]
Merge tag 'linux-kselftest-fixes-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"A single fix to a amd-pstate test Makefile bug that deletes source
files during make clean run"
* tag 'linux-kselftest-fixes-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: amd-pstate: Don't delete source files via Makefile
Miklos Szeredi [Tue, 24 Jan 2023 15:41:18 +0000 (16:41 +0100)]
ovl: fail on invalid uid/gid mapping at copy up
If st_uid/st_gid doesn't have a mapping in the mounter's user_ns, then
copy-up should fail, just like it would fail if the mounter task was doing
the copy using "cp -a".
There's a corner case where the "cp -a" would succeed but copy up fail: if
there's a mapping of the invalid uid/gid (65534 by default) in the user
namespace. This is because stat(2) will return this value if the mapping
doesn't exist in the current user_ns and "cp -a" will in turn be able to
create a file with this uid/gid.
This behavior would be inconsistent with POSIX ACL's, which return -1 for
invalid uid/gid which result in a failed copy.
For consistency and simplicity fail the copy of the st_uid/st_gid are
invalid.
Dylan Yudaken [Fri, 27 Jan 2023 10:59:11 +0000 (02:59 -0800)]
io_uring: always prep_async for drain requests
Drain requests all go through io_drain_req, which has a quick exit in case
there is nothing pending (ie the drain is not useful). In that case it can
run the issue the request immediately.
However for safety it queues it through task work.
The problem is that in this case the request is run asynchronously, but
the async work has not been prepared through io_req_prep_async.
This has not been a problem up to now, as the task work always would run
before returning to userspace, and so the user would not have a chance to
race with it.
However - with IORING_SETUP_DEFER_TASKRUN - this is no longer the case and
the work might be defered, giving userspace a chance to change data being
referred to in the request.
Instead _always_ prep_async for drain requests, which is simpler anyway
and removes this issue.
Ivo Borisov Shopov [Thu, 26 Jan 2023 13:10:33 +0000 (15:10 +0200)]
tools: gpio: fix -c option of gpio-event-mon
Following line should listen for a rising edge and exit after the first
one since '-c 1' is provided.
# gpio-event-mon -n gpiochip1 -o 0 -r -c 1
It works with kernel 4.19 but it doesn't work with 5.10. In 5.10 the
above command doesn't exit after the first rising edge it keep listening
for an event forever. The '-c 1' is not taken into an account.
The problem is in commit 62757c32d5db ("tools: gpio: add multi-line
monitoring to gpio-event-mon").
Before this commit the iterator 'i' in monitor_device() is used for
counting of the events (loops). In the case of the above command (-c 1)
we should start from 0 and increment 'i' only ones and hit the 'break'
statement and exit the process. But after the above commit counting
doesn't start from 0, it start from 1 when we listen on one line.
It is because 'i' is used from one more purpose, counting of lines
(num_lines) and it isn't restore to 0 after following code
for (i = 0; i < num_lines; i++)
gpiotools_set_bit(&values.mask, i);
Restore the initial value of the iterator to 0 in order to allow counting
of loops to work for any cases.
Fixes: 62757c32d5db ("tools: gpio: add multi-line monitoring to gpio-event-mon") Signed-off-by: Ivo Borisov Shopov <ivoshopov@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
[Bartosz: tweak the commit message] Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Arnd Bergmann [Fri, 27 Jan 2023 09:35:05 +0000 (10:35 +0100)]
gpio: ep93xx: remove unused variable
This one was left behind by a previous cleanup patch:
drivers/gpio/gpio-ep93xx.c: In function 'ep93xx_gpio_add_bank':
drivers/gpio/gpio-ep93xx.c:366:34: error: unused variable 'ic' [-Werror=unused-variable]
When CONFIG_PM is disabled, the driver fails to build:
drivers/accel/ivpu/ivpu_pm.c: In function 'ivpu_rpm_get':
drivers/accel/ivpu/ivpu_pm.c:240:84: error: 'struct dev_pm_info' has no member named 'usage_count'
240 | ivpu_dbg(vdev, RPM, "rpm_get count %d\n", atomic_read(&vdev->drm.dev->power.usage_count));
| ^
include/linux/dynamic_debug.h:223:29: note: in definition of macro '__dynamic_func_call_cls'
223 | func(&id, ##__VA_ARGS__); \
| ^~~~~~~~~~~
include/linux/dynamic_debug.h:249:9: note: in expansion of macro '_dynamic_func_call_cls'
249 | _dynamic_func_call_cls(_DPRINTK_CLASS_DFLT, fmt, func, ##__VA_ARGS__)
| ^~~~~~~~~~~~~~~~~~~~~~
include/linux/dynamic_debug.h:272:9: note: in expansion of macro '_dynamic_func_call'
272 | _dynamic_func_call(fmt, __dynamic_dev_dbg, \
| ^~~~~~~~~~~~~~~~~~
include/linux/dev_printk.h:155:9: note: in expansion of macro 'dynamic_dev_dbg'
155 | dynamic_dev_dbg(dev, dev_fmt(fmt), ##__VA_ARGS__)
| ^~~~~~~~~~~~~~~
drivers/accel/ivpu/ivpu_drv.h:65:17: note: in expansion of macro 'dev_dbg'
65 | dev_dbg((vdev)->drm.dev, "[%s] " fmt, #type, ##args); \
| ^~~~~~~
drivers/accel/ivpu/ivpu_pm.c:240:9: note: in expansion of macro 'ivpu_dbg'
240 | ivpu_dbg(vdev, RPM, "rpm_get count %d\n", atomic_read(&vdev->drm.dev->power.usage_count));
| ^~~~~~~~
It would be possible to rework these statements to only conditionally print
the reference counter, or to make the driver depend on CONFIG_PM, but my
impression is that these are not actually needed at all if the driver generally
works, or they could be put back when required. Just remove all four of these
to make the driver build in all configurations.
Support Magnachip D53E6EA8966 based panels such as the Samsung
AMS495QA01 panel as found on the Anbernic RG503. Note this driver
supports only the AMS495QA01 today which receives video signals via DSI,
however it receives commands via 3-wire SPI using DBI.
Chris Morgan [Mon, 23 Jan 2023 15:46:00 +0000 (09:46 -0600)]
drm: of: Add drm_of_get_dsi_bus helper function
Add helper function to find DSI host for devices where DSI panel is not
a minor of a DSI bus (such as the Samsung AMS495QA01 panel or the
official Raspberry Pi touchscreen display).
Co-developed-by: Maya Matuszczyk <maccraft123mc@gmail.com> Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com> Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230123154603.1315112-2-macroalpha82@gmail.com
projects / users / dwmw2 / linux.git / log