Mark Brown [Mon, 15 May 2023 15:17:44 +0000 (00:17 +0900)]
ASoC: SOF: Intel: hda-dai: prepare LNL support
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The HDAudio support has not changed much since CometLake/2019: the
code was reshuffled for IPC4 support and we used hdac_hda for external
and Display Audio codec, but the hda-dai code was only used for
HDAudio codecs.
In the LunarLake architecture, all endpoints (HDaudio, SSP, DMIC,
SoundWire) are handled with the HDaudio DMA, which requires us to
revisit the definitions of HDA_LINK, and remove the mutual exclusion
between NOCODEC and HDA_LINK: we do want the ability to test SSP/DMIC
in NOCODEC mode even with an HDA DMA.
This code change exposed a number of issues, with a useless .prepare
callback, a DAI number mismatch and the need to support SoundWire
which is handled by a different component in
drivers/soundwire/intel_ace2.c.
Pierre-Louis Bossart [Fri, 12 May 2023 18:17:02 +0000 (13:17 -0500)]
ASoC: SOF: Intel: remove mutual exclusion between NOCODEC and HDA_LINK
The nocodec mode served two purposes so far
a) generate a test driver for DMIC/SSP without any codec connected
b) make sure the use of snd_hdac_ libraries was contained
b) is no longer an option for LunarLake, the HDaudio DMA is used for
DMIC/SSP and the HDA_LINK option needs to be enabled.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com Reviewed-by: Rander Wang <rander.wang@intel.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Link: https://lore.kernel.org/r/20230512181702.117483-10-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org
Pierre-Louis Bossart [Fri, 12 May 2023 18:17:01 +0000 (13:17 -0500)]
ASoC: SOF: Intel: hda-dai: use HDA_LINK instead of HDA_AUDIO_CODEC
For LunarLake support, we will have to use HDAudio DMA-based DAIs even
for SSP/DMIC/SoundWire. That's completely different to the
HDA_AUDIO_CODEC, the DAI ops deal with DMA configuration and that can
happen in the absence of any HDAudio codec.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com Reviewed-by: Rander Wang <rander.wang@intel.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Link: https://lore.kernel.org/r/20230512181702.117483-9-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org
Pierre-Louis Bossart [Fri, 12 May 2023 18:17:00 +0000 (13:17 -0500)]
ASoC: SOF: Intel: hda-dai: mark functions as __maybe_unused
hda_dai_hw_params, hda_dai_trigger(), hda_dai_hw_free are currently
only used for HDaudio codec support, but will be reused for
SSP/DMIC/SoundWire in the LunarLake/ACE2.x case. To avoid 'defined but
not used' errors or added complexity in Kconfig, mark all these
functions as __maybe_used.
When SSP/DMIC/SoundWire are added, some of these changes may be
reverted. For now this avoids compilation warnings.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com Reviewed-by: Rander Wang <rander.wang@intel.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Link: https://lore.kernel.org/r/20230512181702.117483-8-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org
Pierre-Louis Bossart [Fri, 12 May 2023 18:16:57 +0000 (13:16 -0500)]
ASoC: SOF: Intel: clarify initialization when HDA_AUDIO_CODEC is not used
For LunarLake support, we need to enable HDA_LINK but we also want the
ability to remove HDaudio codec support, e.g. for 'nocodec'
tests. This requires a small change in the bus initialization without
any codec-specific callbacks provided.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com Reviewed-by: Rander Wang <rander.wang@intel.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Link: https://lore.kernel.org/r/20230512181702.117483-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org
Pierre-Louis Bossart [Fri, 12 May 2023 18:16:55 +0000 (13:16 -0500)]
ASoC: SOF: Intel: hda-dai: remove use of cpu_dai->component drvdata
The existing code relies on conversions from cpu_dai to the sdev
structure pointer based on the cpu_dai component. This works fine for
HDaudio but will not work for SoundWire DAIs which are registered by a
different component. That's a problem preventing reuse of the HDaudio
DMA stream allocation for SoundWire DAIs starting with the LunarLake
platform.
This patch introduces a set of helpers to perform the conversion, and
an indirect way of retrieving the sdev pointer based on the
swidget->comp intermediate pointer.
Suggested-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Reviewed-by: Rander Wang <rander.wang@intel.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Link: https://lore.kernel.org/r/20230512181702.117483-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org
The code has been cleaned-up multiple times, but while adding the new
abstractions for DMIC/SSP/SoundWire it appears that we don't really
need a specific sequence for .prepare, and we can reuse what
.hw_params already does.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Reviewed-by: Rander Wang <rander.wang@intel.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Link: https://lore.kernel.org/r/20230512181702.117483-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org
Bard Liao [Fri, 12 May 2023 17:33:02 +0000 (12:33 -0500)]
ASoC: Intel: sof_sdw: start set codec init function with an adr index
Currently, set_codec_init_func always start with link->adr_d[0] because
we assumed all adr_d on the same link are the same devices. The
assumption is no longer valid when different devices on the same sdw link
are supported.
Fixes: c8db7b50128b ("ASoC: Intel: sof_sdw: support different devices on the same sdw link") Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Link: https://lore.kernel.org/r/20230512173305.65399-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org
Martin Povišer [Thu, 11 May 2023 15:05:46 +0000 (17:05 +0200)]
ASoC: ssm3515: Add new amp driver
The Analog Devices' SSM3515 is a mono audio amplifier with digital
input, equipped on Apple's 2021 iMacs. Add an ASoC driver for it, and
register both the driver code and schema in MAINTAINERS.
Paweł Anikiel [Mon, 8 May 2023 11:30:37 +0000 (13:30 +0200)]
ASoC: ssm2602: Add workaround for playback distortions
Apply a workaround for what appears to be a hardware quirk.
The problem seems to happen when enabling "whole chip power" (bit D7
register R6) for the very first time after the chip receives power. If
either "output" (D4) or "DAC" (D3) aren't powered on at that time,
playback becomes very distorted later on.
This happens on the Google Chameleon v3, as well as on a ZYBO Z7-10:
https://ez.analog.com/audio/f/q-a/543726/solved-ssm2603-right-output-offset-issue/480229
I suspect this happens only when using an external MCLK signal (which
is the case for both of these boards).
Here are some experiments run on a Google Chameleon v3. These were run
in userspace using a wrapper around the i2cset utility:
ssmset() {
i2cset -y 0 0x1a $(($1*2)) $2
}
For each of the following sequences, we apply power to the ssm2603
chip, set the configuration registers R0-R5 and R7-R8, run the selected
sequence, and check for distortions on playback.
ssmset 0x09 0x01 # core
ssmset 0x06 0x1f # chip
ssmset 0x06 0x07 # out, dac
NOT OK
ssmset 0x06 0x1f # chip
ssmset 0x09 0x01 # core
ssmset 0x06 0x07 # out, dac
NOT OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x0f # chip, out
ssmset 0x06 0x07 # dac
NOT OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x17 # chip, dac
ssmset 0x06 0x07 # out
NOT OK
For each of the following sequences, we apply power to the ssm2603
chip, run the selected sequence, issue a reset with R15, configure
R0-R5 and R7-R8, run one of the NOT OK sequences from above, and check
for distortions.
Aidan MacDonald [Tue, 9 May 2023 12:42:36 +0000 (13:42 +0100)]
ASoC: jz4740-i2s: Add support for X1000 SoC
The X1000's AIC is similar to the AIC found on other Ingenic SoCs.
It has symmetric playback/capture rates like the JZ4740, but more
flexible clocking when outputting the system or bit clocks.
Srinivas Kandagatla [Tue, 9 May 2023 11:22:01 +0000 (12:22 +0100)]
ASoC: qcom: q6dsp: add support to more display ports
Existing code base only supports one display port, this patch adds
support upto 8 display ports. This support is required to allow platforms
like X13s which have 3 display ports, and some of the Qualcomm SoCs
there are upto 7 Display ports.
Martin Povišer [Tue, 9 May 2023 15:34:12 +0000 (17:34 +0200)]
ASoC: dt-bindings: Adjust #sound-dai-cells on TI's single-DAI codecs
A bunch of TI's codecs have binding schemas which force #sound-dai-cells
to one despite those codecs only having a single DAI. Allow for bindings
with zero DAI cells and deprecate the former non-zero value.
Aidan MacDonald [Tue, 9 May 2023 12:51:34 +0000 (13:51 +0100)]
ASoC: jz4740-i2s: Make I2S divider calculations more robust
When the CPU supplies bit/frame clocks, the system clock (clk_i2s)
is divided to produce the bit clock. This is a simple 1/N divider
with a fairly limited range, so for a given system clock frequency
only a few sample rates can be produced. Usually a wider range of
sample rates is supported by varying the system clock frequency.
The old calculation method was not very robust and could easily
produce the wrong clock rate, especially with non-standard rates.
For example, if the system clock is 1.99x the target bit clock
rate, the divider would be calculated as 1 instead of the more
accurate 2.
Instead, use a more accurate method that considers two adjacent
divider settings and selects the one that produces the least error
versus the requested rate. If the error is 5% or higher then the
rate setting is rejected to prevent garbled audio.
Skip divider calculation when the codec is supplying both the bit
and frame clock; in that case, the divider outputs are unused and
we don't want to constrain the sample rate.
Mark Brown [Tue, 9 May 2023 09:31:38 +0000 (18:31 +0900)]
ASoC: add and use asoc_dummy_dlc
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Many ASoC drivers are using dummy DAI.
I have 2 concern about it. 1st one is there is no guarantee that local
strings ("snd-soc-dummy-dai", "snd-soc-dummy") are kept until the card
was binded if it was added at subfunction.
2nd one is we can use common snd_soc_dai_link_component for it.
This patch-set adds common asoc_dummy_dlc, and use it.
Maxim Kochetkov [Fri, 5 May 2023 06:28:20 +0000 (09:28 +0300)]
ASoC: dwc: limit the number of overrun messages
On slow CPU (FPGA/QEMU emulated) printing overrun messages from
interrupt handler to uart console may leads to more overrun errors.
So use dev_err_ratelimited to limit the number of error messages.
Shengjiu Wang [Fri, 5 May 2023 07:55:22 +0000 (15:55 +0800)]
ASoC: fsl_sai: MCLK bind with TX/RX enable bit
On i.MX8MP, the sai MCLK is bound with TX/RX enable bit,
which means the TX/RE enable bit need to be enabled then
MCLK can be output on PAD.
Some codec (for example: WM8962) needs the MCLK output
earlier, otherwise there will be issue for codec
configuration.
Add new soc data "mclk_with_tere" for this platform and
enable the MCLK output in startup stage.
As "mclk_with_tere" only applied to i.MX8MP, currently
The soc data is shared with i.MX8MN, so need to add
an i.MX8MN own soc data with "mclk_with_tere" disabled.
Anup Sharma [Sat, 6 May 2023 10:52:09 +0000 (16:22 +0530)]
ASoC: dt-bindings: nau8540: Convert to dtschema
Convert the NAU8540 audio CODEC bindings to DT schema
Signed-off-by: Anup Sharma <anupnewsmail@gmail.com
Changes:
V1 -> V2: Adhere to the correct procedure by including the maintainer's name.
Drop Mark from maintainer.
ASoC: amd: ps: remove the register read and write wrappers.
Instead of acp63_readl() and acp63_writel() wrappers
readl and writel functions can be used directly.
Remove acp63_readl() and acp63_writel() wrappers.
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.
Maxim Kochetkov [Fri, 5 May 2023 05:35:21 +0000 (08:35 +0300)]
ASoC: dwc: extend supported formats
The COMP1_TX_WORDSIZE_0/COMP2_RX_WORDSIZE_0 fields in the comp
registers indicate the maximum wordsize supported. DWC I2S controller
can operate with any smaller wordsize. So extend the formats to let
I2S to operate in any allowed modes.
Mark Brown [Tue, 25 Apr 2023 17:22:46 +0000 (18:22 +0100)]
ASoC: rt5682: Use a maple tree based register cache
regmap has introduced a maple tree based register cache which makes use of
this more advanced data structure which has been added to the kernel
recently. Maple trees are much flatter than rbtrees, meaning that they do
not grow to such depths when the register map is sparse which makes access
a bit more efficient. The maple tree cache type is still a bit of a work
in progress but should be effective for some devices already.
RT5682 seems like a good candidate for maple tree. It only supports single
register read/write operations so will gain minimal benefit from storing
the register data in device native format like rbtree does (none for
SoundWire) and has some sparsity in the register map which is a good fit
for maple tree.
Convert to use maple tree. There should be little if any visible difference
at runtime.
Rob Herring [Fri, 21 Apr 2023 21:48:10 +0000 (16:48 -0500)]
ASoC: dt-bindings: More dropping unneeded quotes
Another batch of dropping unneeded quotes on $id and $schema which were
missed in the last round. Once all these are fixed, checking for this can
be enabled in yamllint.
Mark Brown [Fri, 21 Apr 2023 16:35:46 +0000 (17:35 +0100)]
ASoC: rt715: Use maple tree register cache
regmap has introduced a maple tree based register cache which makes use of
this more advanced data structure which has been added to the kernel
recently. Maple trees are much flatter than rbtrees, meaning that they do
not grow to such depths when the register map is sparse which makes access
a bit more efficient. The maple tree cache type is still a bit of a work
in progress but should be effective for some devices already.
RT715 seems like a good candidate for maple tree. It is a SoundWire MBQ
device and therefore supports only single register read/write operations
which do not use raw I/O and will therefore save the cost of converting
to and from device native format when accessing the cache while not having
a negative impact from the current lack of bulk operations in maple tree
cache sync. It has a moderately large and quite sparse register map which
is a good fit for storing in a maple tree.
Convert to use maple tree. There should be little if any visible difference
at runtime.
AngeloGioacchino Del Regno [Wed, 3 May 2023 11:34:13 +0000 (13:34 +0200)]
ASoC: mediatek: mt8195-afe-pcm: Clean up unnecessary functions
Function mt8195_afe_init_registers() performs just a single call to
regmap_multi_reg_write(), it returns int and it's not error checked;
move that call to the probe function and also add some error check.
While at it, also move the contents of mt8195_afe_parse_of() to the
probe function as well: since this is getting a handle to topckgen
and since that's optional, the ifdef for CONFIG_SND_SOC_MT6359 can
also be removed.
AngeloGioacchino Del Regno [Wed, 3 May 2023 11:34:10 +0000 (13:34 +0200)]
ASoC: SOF: mediatek: mt8186: Use snd_sof_ipc_process_reply() helper
Function mt8186_get_reply() performs practically the same operation
as the common snd_sof_ipc_get_reply() helper: removing the custom
function allows us to simply perform a call to the sof-priv helper
snd_sof_ipc_process_reply(), simplifying and shortening this driver
and getting all the benefits of using a common API.
AngeloGioacchino Del Regno [Wed, 3 May 2023 11:34:09 +0000 (13:34 +0200)]
ASoC: SOF: mediatek: mt8195: Use snd_sof_ipc_process_reply() helper
Function mt8195_get_reply() performs practically the same operation
as the common snd_sof_ipc_get_reply() helper: removing the custom
function allows us to simply perform a call to the sof-priv helper
snd_sof_ipc_process_reply(), simplifying and shortening this driver
and getting all the benefits of using a common API.
Linus Torvalds [Sun, 7 May 2023 18:32:18 +0000 (11:32 -0700)]
Merge tag 'perf-tools-for-v6.4-3-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tool updates from Arnaldo Carvalho de Melo:
"Third version of perf tool updates, with the build problems with with
using a 'vmlinux.h' generated from the main build fixed, and the bpf
skeleton build disabled by default.
Build:
- Require libtraceevent to build, one can disable it using
NO_LIBTRACEEVENT=1.
It is required for tools like 'perf sched', 'perf kvm', 'perf
trace', etc.
libtraceevent is available in most distros so installing
'libtraceevent-devel' should be a one-time event to continue
building perf as usual.
Using NO_LIBTRACEEVENT=1 produces tooling that is functional and
sufficient for lots of users not interested in those libtraceevent
dependent features.
- Allow Python support in 'perf script' when libtraceevent isn't
linked, as not all features requires it, for instance Intel PT does
not use tracepoints.
- Error if the python interpreter needed for jevents to work isn't
available and NO_JEVENTS=1 isn't set, preventing a build without
support for JSON vendor events, which is a rare but possible
condition. The two check error messages:
$(error ERROR: No python interpreter needed for jevents generation. Install python or build with NO_JEVENTS=1.)
$(error ERROR: Python interpreter needed for jevents generation too old (older than 3.6). Install a newer python or build with NO_JEVENTS=1.)
- Make libbpf 1.0 the minimum required when building with out of
tree, distro provided libbpf.
- Use libsdtc++'s and LLVM's libcxx's __cxa_demangle, a portable C++
demangler, add 'perf test' entry for it.
- Make binutils libraries opt in, as distros disable building with it
due to licensing, they were used for C++ demangling, for instance.
- Switch libpfm4 to opt-out rather than opt-in, if libpfm-devel (or
equivalent) isn't installed, we'll just have a build warning:
Makefile.config:1144: libpfm4 not found, disables libpfm4 support. Please install libpfm4-dev
- Add a feature test for scandirat(), that is not implemented so far
in musl and uclibc, disabling features that need it, such as
scanning for tracepoints in /sys/kernel/tracing/events.
perf BPF filters:
- New feature where BPF can be used to filter samples, for instance:
- In addition to 'period' (PERF_SAMPLE_PERIOD), the other
PERF_SAMPLE_ can be used for filtering, and also some other sample
accessible values, from tools/perf/Documentation/perf-record.txt:
- Allocate single letter option -M for --map-nr-entries, as it is
proving being frequently used.
- Fix struct rq lock access for older kernels with BPF's CO-RE
(Compile once, run everywhere).
- Fix problems found with MSAn.
perf report/top:
- Add inline information when using --call-graph=fp or lbr, as was
already done to the --call-graph=dwarf callchain mode.
- Improve the 'srcfile' sort key performance by really using an
optimization introduced in 6.2 for the 'srcline' sort key that
avoids calling addr2line for comparision with each sample.
perf sched:
- Make 'perf sched latency/map/replay' to use "sched:sched_waking"
instead of "sched:sched_waking", consistent with 'perf record'
since d566a9c2d482 ("perf sched: Prefer sched_waking event when it
exists").
perf ftrace:
- Make system wide the default target for latency subcommand, run the
following command then generate some network traffic and press
control+C:
# perf ftrace latency -T __kfree_skb
^C
DURATION | COUNT | GRAPH |
0 - 1 us | 27 | ############# |
1 - 2 us | 22 | ########### |
2 - 4 us | 8 | #### |
4 - 8 us | 5 | ## |
8 - 16 us | 24 | ############ |
16 - 32 us | 2 | # |
32 - 64 us | 1 | |
64 - 128 us | 0 | |
128 - 256 us | 0 | |
256 - 512 us | 0 | |
512 - 1024 us | 0 | |
1 - 2 ms | 0 | |
2 - 4 ms | 0 | |
4 - 8 ms | 0 | |
8 - 16 ms | 0 | |
16 - 32 ms | 0 | |
32 - 64 ms | 0 | |
64 - 128 ms | 0 | |
128 - 256 ms | 0 | |
256 - 512 ms | 0 | |
512 - 1024 ms | 0 | |
1 - ... s | 0 | |
#
perf top:
- Add --branch-history (LBR: Last Branch Record) option, just like
already available for 'perf record'.
- Fix segfault in thread__comm_len() where thread->comm was being
used outside thread->comm_lock.
perf annotate:
- Allow configuring objdump and addr2line in ~/.perfconfig., so that
you can use alternative binaries, such as llvm's.
perf kvm:
- Add TUI mode for 'perf kvm stat report'.
Reference counting:
- Add reference count checking infrastructure to check for use after
free, done to the 'cpumap', 'namespaces', 'maps' and 'map' structs,
more to come.
To build with it use -DREFCNT_CHECKING=1 in the make command line
to build tools/perf. Documented at:
- The above caught, for instance, fix, present in this series:
- Fix maps use after put in 'perf test "Share thread maps"':
'maps' is copied from leader, but the leader is put on line 79
and then 'maps' is used to read the reference count below - so
a use after put, with the put of maps happening within
thread__put.
Fixed by reversing the order of puts so that the leader is put
last.
- Also several fixes were made to places where reference counts were
not being held.
- Make this one of the tests in 'make -C tools/perf build-test' to
regularly build test it and to make sure no direct access to the
reference counted structs are made, doing that via accessors to
check the validity of the struct pointer.
ARM64:
- Fix 'perf report' segfault when filtering coresight traces by
sparse lists of CPUs.
- Add support for 'simd' as a sort field for 'perf report', to show
ARM's NEON SIMD's predicate flags: "partial" and "empty".
arm64 vendor events:
- Add N1 metrics.
Intel vendor events:
- Add graniterapids, grandridge and sierraforrest events.
- Refresh metrics for alderlake-n, broadwell, broadwellde,
broadwellx, haswell, haswellx, icelakex, ivybridge, ivytown and
skylakex.
perf stat:
- Implement --topdown using JSON metrics.
- Add TopdownL1 JSON metric as a default if present, but disable it
for now for some Intel hybrid architectures, a series of patches
addressing this is being reviewed and will be submitted for v6.5.
- Use metrics for --smi-cost.
- Update topdown documentation.
Vendor events (JSON) infrastructure:
- Add support for computing and printing metric threshold values. For
instance, here is one found in thesapphirerapids json file:
{
"BriefDescription": "Percentage of cycles spent in System Management Interrupts.",
"MetricExpr": "((msr@aperf@ - cycles) / msr@aperf@ if msr@smi@ > 0 else 0)",
"MetricGroup": "smi",
"MetricName": "smi_cycles",
"MetricThreshold": "smi_cycles > 0.1",
"ScaleUnit": "100%"
},
- Test parsing metric thresholds with the fake PMU in 'perf test
pmu-events'.
- Support for printing metric thresholds in 'perf list'.
- Add --metric-no-threshold option to 'perf stat'.
- Add rand (reverse and) and has_pmem (optane memory) support to
metrics.
- Sort list of input files to avoid depending on the order from
readdir() helping in obtaining reproducible builds.
S/390:
- Add common metrics: - CPI (cycles per instruction), prbstate (ratio
of instructions executed in problem state compared to total number
of instructions), l1mp (Level one instruction and data cache misses
per 100 instructions).
- Add cache metrics for z13, z14, z15 and z16.
- Add metric for TLB and cache.
ARM:
- Add raw decoding for SPE (Statistical Profiling Extension) v1.3 MTE
(Memory Tagging Extension) and MOPS (Memory Operations) load/store.
Intel PT hardware tracing:
- Add event type names UINTR (User interrupt delivered) and UIRET
(Exiting from user interrupt routine), documented in table 32-50
"CFE Packet Type and Vector Fields Details" in the Intel Processor
Trace chapter of The Intel SDM Volume 3 version 078.
- Add support for new branch instructions ERETS and ERETU.
- Fix CYC timestamps after standalone CBR
ARM CoreSight hardware tracing:
- Allow user to override timestamp and contextid settings.
- Fix segfault in dso lookup.
- Fix timeless decode mode detection.
- Add separate decode paths for timeless and per-thread modes.
auxtrace:
- Fix address filter entire kernel size.
Miscellaneous:
- Fix use-after-free and unaligned bugs in the PLT handling routines.
- Use zfree() to reduce chances of use after free.
- Add missing 0x prefix for addresses printed in hexadecimal in 'perf
probe'.
- Suppress massive unsupported target platform errors in the unwind
code.
- Fix return incorrect build_id size in elf_read_build_id().
- Add missing new parameter in kfree_skb tracepoint to the python
scripts using it.
- Add 'perf bench syscall fork' benchmark.
- Add support for printing PERF_MEM_LVLNUM_UNC (Uncached access) in
'perf mem'.
- Fix wrong size expectation for perf test 'Setup struct
perf_event_attr' caused by the patch adding
perf_event_attr::config3.
- Fix some spelling mistakes"
* tag 'perf-tools-for-v6.4-3-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (365 commits)
Revert "perf build: Make BUILD_BPF_SKEL default, rename to NO_BPF_SKEL"
Revert "perf build: Warn for BPF skeletons if endian mismatches"
perf metrics: Fix SEGV with --for-each-cgroup
perf bpf skels: Stop using vmlinux.h generated from BTF, use subset of used structs + CO-RE
perf stat: Separate bperf from bpf_profiler
perf test record+probe_libc_inet_pton: Fix call chain match on x86_64
perf test record+probe_libc_inet_pton: Fix call chain match on s390
perf tracepoint: Fix memory leak in is_valid_tracepoint()
perf cs-etm: Add fix for coresight trace for any range of CPUs
perf build: Fix unescaped # in perf build-test
perf unwind: Suppress massive unsupported target platform errors
perf script: Add new parameter in kfree_skb tracepoint to the python scripts using it
perf script: Print raw ip instead of binary offset for callchain
perf symbols: Fix return incorrect build_id size in elf_read_build_id()
perf list: Modify the warning message about scandirat(3)
perf list: Fix memory leaks in print_tracepoint_events()
perf lock contention: Rework offset calculation with BPF CO-RE
perf lock contention: Fix struct rq lock access
perf stat: Disable TopdownL1 on hybrid
perf stat: Avoid SEGV on counter->name
...
Linus Torvalds [Sun, 7 May 2023 18:04:26 +0000 (11:04 -0700)]
Merge tag 'core-debugobjects-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull debugobjects fix from Thomas Gleixner:
"A single fix for debugobjects:
The recent fix to ensure atomicity of lookup and allocation
inadvertently broke the pool refill mechanism, so that debugobject
OOMs now in certain situations. The reason is that the functions which
got updated no longer invoke debug_objecs_init(), which is now the
only place to care about refilling the tracking object pool.
Restore the original behaviour by adding explicit refill opportunities
to those places"
* tag 'core-debugobjects-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobject: Ensure pool refill (again)
Linus Torvalds [Sun, 7 May 2023 17:57:14 +0000 (10:57 -0700)]
Merge tag 'v6.4-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- A long-standing bug in crypto_engine
- A buggy but harmless check in the sun8i-ss driver
- A regression in the CRYPTO_USER interface
* tag 'v6.4-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: api - Fix CRYPTO_USER checks for report function
crypto: engine - fix crypto_queue backlog handling
crypto: sun8i-ss - Fix a test in sun8i_ss_setup_ivs()
Linus Torvalds [Sun, 7 May 2023 17:31:45 +0000 (10:31 -0700)]
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A couple more patches that would be good to get into -rc1:
- Revert an i.MX patch that's causing video failures because division
math goes sideways
- Fix a clang + W=1 build isue where FIELD_PREP() is taking a 32-bit
variable instead of the usual u64 type
- Fix a Kconfig bug in the StarFive JH7110 clk config that selects a
reset controller when it can't be selected"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: starfive: Fix RESET_STARFIVE_JH7110 can't be selected in a specified case
clk: sp7021: Adjust width of _m in HWM_FIELD_PREP()
Revert "clk: imx: composite-8m: Add support to determine_rate"
Linus Torvalds [Sun, 7 May 2023 17:17:33 +0000 (10:17 -0700)]
Merge tag 'mailbox-v6.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- mailbox api: allow direct registration to a channel and convert omap
and pcc to use mbox_bind_client
- omap and hi6220 : use of_property_read_bool
- test: fix double-free and use spinlock header
- rockchip and bcm-pdc: drop of_match_ptr
- mpfs: change config symbol
- mediatek gce: support MT6795
- qcom apcs: consolidate of_device_id and support IPQ9574
* tag 'mailbox-v6.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
dt-bindings: mailbox: qcom: add compatible for IPQ9574 SoC
mailbox: qcom-apcs-ipc: do not grow the of_device_id
dt-bindings: mailbox: qcom,apcs-kpss-global: use fallbacks for few variants
dt-bindings: mailbox: mediatek,gce-mailbox: Add support for MT6795
mailbox: mpfs: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE
mailbox: bcm-pdc: drop of_match_ptr for ID table
mailbox: rockchip: drop of_match_ptr for ID table
mailbox: mailbox-test: Fix potential double-free in mbox_test_message_write()
mailbox: mailbox-test: Explicitly include header for spinlock support
mailbox: Use of_property_read_bool() for boolean properties
mailbox: pcc: Use mbox_bind_client
mailbox: omap: Use mbox_bind_client
mailbox: Allow direct registration to a channel
Linus Torvalds [Sun, 7 May 2023 17:00:09 +0000 (10:00 -0700)]
Merge tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux
Pull more io_uring updates from Jens Axboe:
"Nothing major in here, just two different parts:
- A small series from Breno that enables passing the full SQE down
for ->uring_cmd().
This is a prerequisite for enabling full network socket operations.
Queued up a bit late because of some stylistic concerns that got
resolved, would be nice to have this in 6.4-rc1 so the dependent
work will be easier to handle for 6.5.
- Fix for the huge page coalescing, which was a regression introduced
in the 6.3 kernel release (Tobias)"
* tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux:
io_uring: Remove unnecessary BUILD_BUG_ON
io_uring: Pass whole sqe to commands
io_uring: Create a helper to return the SQE size
io_uring/rsrc: check for nonconsecutive pages
We need to better polish building with BPF skels, so revert back to
making it an experimental feature that has to be explicitely enabled
using BUILD_BPF_SKEL=1.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to better polish building with BPF skels, so revert back to
making it an experimental feature that has to be explicitely enabled
using BUILD_BPF_SKEL=1.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Sat, 6 May 2023 18:43:08 +0000 (11:43 -0700)]
Merge tag 'mm-stable-2023-05-06-10-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull dmapool updates - again - from Andrew Morton:
"Reinstate the dmapool changes which were accidentally removed by a
mishap on the last commit in the previous attempt at the series"
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup").
[ The whole old series: def8574308ed..2d55c16c0c54 results in an empty
diff because that last commit ended up being just a revert of all that
came everything before it. - Linus ]
* tag 'mm-stable-2023-05-06-10-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
dmapool: link blocks across pages
dmapool: don't memset on free twice
dmapool: simplify freeing
dmapool: consolidate page initialization
dmapool: rearrange page alloc failure handling
dmapool: move debug code to own functions
dmapool: speedup DMAPOOL_DEBUG with init_on_alloc
dmapool: cleanup integer types
dmapool: use sysfs_emit() instead of scnprintf()
dmapool: remove checks for dev == NULL
Linus Torvalds [Sat, 6 May 2023 18:25:03 +0000 (11:25 -0700)]
Merge tag 'mm-hotfixes-stable-2023-05-06-10-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Five hotfixes.
Three are cc:stable, two pertain to merge window changes"
* tag 'mm-hotfixes-stable-2023-05-06-10-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
afs: fix the afs_dir_get_folio return value
nilfs2: do not write dirty data after degenerating to read-only
mm: do not reclaim private data from pinned page
nilfs2: fix infinite loop in nilfs_mdt_get_block()
mm/mmap/vma_merge: always check invariants
Keith Busch [Thu, 26 Jan 2023 21:51:24 +0000 (13:51 -0800)]
dmapool: link blocks across pages
The allocated dmapool pages are never freed for the lifetime of the pool.
There is no need for the two level list+stack lookup for finding a free
block since nothing is ever removed from the list. Just use a simple
stack, reducing time complexity to constant.
The implementation inserts the stack linking elements and the dma handle
of the block within itself when freed. This means the smallest possible
dmapool block is increased to at most 16 bytes to accommodate these
fields, but there are no exisiting users requesting a dma pool smaller
than that anyway.
Removing the list has a significant change in performance. Using the
kernel's micro-benchmarking self test:
The module test allocates quite a few blocks that may not accurately
represent how these pools are used in real life. For a more marco level
benchmark, running fio high-depth + high-batched on nvme, this patch shows
submission and completion latency reduced by ~100usec each, 1% IOPs
improvement, and perf record's time spent in dma_pool_alloc/free were
reduced by half.
[kbusch@kernel.org: push new blocks in ascending order] Link: https://lkml.kernel.org/r/20230221165400.1595247-1-kbusch@meta.com Link: https://lkml.kernel.org/r/20230126215125.4069751-12-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Keith Busch [Thu, 26 Jan 2023 21:51:22 +0000 (13:51 -0800)]
dmapool: simplify freeing
The actions for busy and not busy are mostly the same, so combine these
and remove the unnecessary function. Also, the pool is about to be freed
so there's no need to poison the page data since we only check for poison
on alloc, which can't be done on a freed pool.
Link: https://lkml.kernel.org/r/20230126215125.4069751-10-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tony Battersby [Thu, 26 Jan 2023 21:51:17 +0000 (13:51 -0800)]
dmapool: cleanup integer types
To represent the size of a single allocation, dmapool currently uses
'unsigned int' in some places and 'size_t' in other places. Standardize
on 'unsigned int' to reduce overhead, but use 'size_t' when counting all
the blocks in the entire pool.
Link: https://lkml.kernel.org/r/20230126215125.4069751-5-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tony Battersby [Thu, 26 Jan 2023 21:51:15 +0000 (13:51 -0800)]
dmapool: remove checks for dev == NULL
dmapool originally tried to support pools without a device because
dma_alloc_coherent() supports allocations without a device. But nobody
ended up using dma pools without a device, and trying to do so will result
in an oops. So remove the checks for pool->dev == NULL since they are
unneeded bloat.
[kbusch@kernel.org: add check for null dev on create] Link: https://lkml.kernel.org/r/20230126215125.4069751-3-kbusch@meta.com Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix another case of an incorrect check for the returned 'folio' value
from __filemap_get_folio().
The failure case used to return NULL, but was changed by commit 66dabbb65d67 ("mm: return an ERR_PTR from __filemap_get_folio").
But in the meantime, commit ec108d3cc766 ("NFS: Convert readdir page
array functions to use a folio") added a new user of that function.
And my merge of the two did not fix this up correctly.
The ext4 merge had the same issue, but that one had been caught in
linux-next and got properly fixed while merging.
Fixes: 0127f25b5dfc ("Merge tag 'nfs-for-6.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs") Cc: Anna Schumaker <anna@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph Hellwig [Wed, 3 May 2023 15:45:26 +0000 (17:45 +0200)]
afs: fix the afs_dir_get_folio return value
Keep returning NULL on failure instead of letting an ERR_PTR escape to
callers that don't expect it.
Link: https://lkml.kernel.org/r/20230503154526.1223095-2-hch@lst.de Fixes: 66dabbb65d67 ("mm: return an ERR_PTR from __filemap_get_folio") Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: David Howells <dhowells@redhat.com> Tested-by: David Howells <dhowells@redhat.com> Cc: Marc Dionne <marc.dionne@auristor.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
projects / linux.git / log