Arnd Bergmann [Tue, 3 May 2022 13:25:36 +0000 (15:25 +0200)]
Merge tag 'bindings-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Clock binding updates for omaps
Minor clock binding changes to document clock-output-names usage for omaps
so we can fix lots of related dt bindings check warnings. The related driver
changes already got merged for v5.18.
* tag 'bindings-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
dt-bindings: clock: ti: Add clock-output-names for TI composite clocks
dt-bindings: clock: ti: Add clock-output-names for clockctrl
dt-bindings: omap: Add clock-output-names and #clock-cells
Arnd Bergmann [Tue, 3 May 2022 13:24:08 +0000 (15:24 +0200)]
Merge tag 'renesas-arm-dt-for-v5.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.19
- ADC, SDHI, CAN-FD, I2C, QSPI, timer, watchdog, sound, USB, SPI, GPU,
cpufreq, and thermal support for the RZ/V2L SoC, and the RZ/V2L
SMARC EVK development board,
- USB, I2C, Audio, NOR Flash, timer, SPI support for RZ/G2LC SMARC EVK
development board,
- Can-FD support for the R-Car M30W+ and V3U SoCs, and the Falcon
development board,
- I2C and GPIO support for the R-Car S4-8 SoC,
- I2C EEPROM support for the Falcon development board,
- SPI Multi I/O Bus Controller (RPC-IF) support for the R-Car H3,
M3-W(+), M3-N, E3, and D3 SoCs,
- RPC HyperFlash support for the Draak, Ebisu, Salvator-X(S), and ULCB
development boards,
- Initial support (UART, DMAC, pin control, SDHI, eMMC, Ethernet) for
the RZ/G2UL SoC, and the RZ/G2UL SMARC EVK development board,
- Miscellaneous fixes and improvements.
Merge tag 'samsung-dt64-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.19
1. Cleanup: move aliases of board-related features to board in
Exynos850.
2. Add specific compatibles to Multi Core Timer to allow stricter DT
schema matching.
* tag 'samsung-dt64-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: tesla: add a specific compatible to MCT on FSD
arm64: dts: exynos: add a specific compatible to MCT
arm64: dts: exynos: move aliases to board in Exynos850
Merge tag 'samsung-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.19
1. Several DT schema related changes to make DTBs passing schema checks:
EHCI/OHCI/DMA/Ethernet node names, DMA channels order, USB-like
compatibles.
2. Add specific compatibles to Multi Core Timer to allow stricter DT
schema matching.
3. Cleanup from deprecated bindings:
- Remove deprecated unit-address workaround for Exynos5422 Odroid XU3
LPDDR3 memory timings.
- Do not use unit-address (and SFR region) in Exynos5250 MIPI phy in
favor of syscon node (unit-address deprecated in 2016).
- Use standard generic PHYs for EHCI/OHCI device in S5PV210.
4. Fix inverted SPI CS (thus blank panel) on S5PV210 Aries boards.
5. Correct Bluetooth interupt name on S5PV210 Aries boards.
* tag 'samsung-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: s5pv210: align DMA channels with dtschema
ARM: dts: s5pv210: Adjust DMA node names to match spec
ARM: dts: s5pv210: Adjust memory reg entries to match spec
ARM: dts: s5pv210: Correct interrupt name for bluetooth in Aries
ARM: dts: s5pv210: Remove spi-cs-high on panel in Aries
ARM: dts: s5pv210: Use standard arrays of generic PHYs for EHCI/OHCI device
ARM: dts: s5pv210: align EHCI/OHCI nodes with dtschema
ARM: dts: exynos: align EHCI/OHCI nodes with dtschema on Exynos4
ARM: dts: exynos: drop deprecated SFR region from MIPI phy
ARM: dts: exynos: add a specific compatible to MCT
ARM: dts: exynos: remove deprecated unit address for LPDDR3 timings on Odroid
ARM: dts: exynos: fix compatible strings for Ethernet USB devices
ARM: dts: exynos: fix ethernet node name for different odroid boards
Merge tag 'dt-cleanup-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Minor cleanup of ARM DTS for v5.19
Align node names and unit addresses to DT schema and DT coding style in
nspire, ox820 and socfpga.
* tag 'dt-cleanup-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: socfpga: align interrupt controller node name with dtschema
ARM: dts: ox820: align interrupt controller node name with dtschema
ARM: dts: nspire: use lower case hex addresses in node unit addresses
ARM: dts: r9a06g032: Drop "arm,cortex-a7-timer" from timer node
"make dtbs_check":
arch/arm/boot/dts/r9a06g032-rzn1d400-db.dt.yaml: timer: compatible: 'oneOf' conditional failed, one must be fixed:
['arm,cortex-a7-timer', 'arm,armv7-timer'] is too long
'arm,cortex-a7-timer' is not one of ['arm,cortex-a15-timer']
'arm,cortex-a7-timer' is not one of ['arm,armv7-timer']
'arm,cortex-a7-timer' is not one of ['arm,armv8-timer']
From schema: Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
The Cortex-A7 timer should just declare compatibility with
"arm,armv7-timer".
Biju Das [Sat, 2 Apr 2022 08:13:26 +0000 (09:13 +0100)]
arm64: dts: renesas: rzg2ul-smarc: Enable microSD on SMARC platform
Enable the microSD card slot connected to SDHI1 on the RZ/G2UL SMARC
platform by removing the sdhi1 override which disabled it, and by adding
the necessary pinmux required for SDHI1.
This patch also adds gpios property to vccq_sdhi1 regulator.
Biju Das [Sat, 2 Apr 2022 08:13:23 +0000 (09:13 +0100)]
arm64: dts: renesas: rzg2ul-smarc: Add scif0 and audio clk pins
Add scif0 and audio clk pins to soc pinctrl dtsi and drop deleting
the pinctrl-0 and pinctrl-names properties for scif0 node so that
we now actually make use of these properties for scif0.
Biju Das [Tue, 12 Apr 2022 16:13:14 +0000 (17:13 +0100)]
arm64: dts: renesas: Add initial device tree for RZ/G2UL Type-1 SMARC EVK
Add basic support for RZ/G2UL SMARC EVK (based on R9A07G043U11):
- memory
- External input clock
- CPG
- DMA
- SCIF
It shares the same carrier board with RZ/G2L, but the pin mapping is
different. Disable the device nodes which are not tested and delete the
corresponding pinctrl definitions.
Biju Das [Tue, 12 Apr 2022 16:13:13 +0000 (17:13 +0100)]
arm64: dts: renesas: Add initial DTSI for RZ/G2UL SoC
Add initial DTSI for RZ/G2UL SoC.
Both RZ/G2L and RZ/G2UL uses the same SMARC EVK. Therefore they share
the common dtsi (rz-smarc.dtsi) file. Place holders are added in
device nodes to avoid compilation errors for the devices which have
not been enabled yet on RZ/G2UL SoC.
Biju Das [Fri, 1 Apr 2022 17:54:27 +0000 (18:54 +0100)]
arm64: dts: renesas: rzg2l-smarc: Move gpios property of vccq_sdhi1 from common dtsi
On RZ/G2{L,LC} SoM module, gpio for power selection is connected to
P39_1 whereas on RZ/G2UL it is connected to P6_1. So move gpios property
of vccq_sdhi1 regulator from common dtsi to soc specific dtsi.
Biju Das [Fri, 1 Apr 2022 14:57:02 +0000 (15:57 +0100)]
arm64: dts: renesas: rzg2lc-smarc: Enable RSPI1 on carrier board
RSPI1 (SPI1) interface is available on PMOD0 connector (J1) on the
carrier board. This patch adds pinmux and spi1 nodes to the carrier
board dtsi file and drops deleting pinctl* properties from DTS file.
RSPI1 interface is tested by setting the macro SW_RSPI_CAN to 0.
Add device nodes for the SPI Multi I/O Bus Controllers (RPC-IF) on the
various R-Car Gen3 SoCs that do not have support for them yet in their
device trees (R-Car H3, M3-W, M3-W+, M3-N, E3, and D3).
Biju Das [Sat, 2 Apr 2022 07:30:34 +0000 (08:30 +0100)]
dt-bindings: clock: Add R9A07G043 CPG Clock and Reset Definitions
Define RZ/G2UL (R9A07G043U) Clock Pulse Generator Core Clock and module
clock outputs, as listed in Table 7.1.4.2 ("Clock List r0.51") and also
add Reset definitions referring to registers CPG_RST_* in Section 7.2.3
("Register configuration") of the RZ/G2UL Hardware User's Manual (Rev.
0.51, Nov. 2021).
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220402073037.23947-3-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Document the Renesas SMARC EVK board which is based on the Renesas
RZ/G2UL Type-1 (R9A07G043U11) SoC. The SMARC EVK consists of an
RZ/G2UL Type-1 SoM module and a SMARC carrier board. The SoM module
sits on top of the carrier board.
Tony Lindgren [Thu, 3 Feb 2022 11:23:37 +0000 (13:23 +0200)]
dt-bindings: clock: ti: Add clock-output-names for TI composite clocks
For the TI composite clocks, we currently have only the divider clock
list clock-output-names as an optional devicetree property. Let's add
clock-output-names for all the TI composite clock bindings.
This allows us to use clock-output-names for the clockctrl instance name
instead of relying on a custom compatible or non-standard node names.
Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org>
Message-Id: <20220203112337.19821-3-tony@atomide.com>
Tony Lindgren [Thu, 3 Feb 2022 11:23:36 +0000 (13:23 +0200)]
dt-bindings: clock: ti: Add clock-output-names for clockctrl
This allows us to use clock-output-names for the clockctrl instance
name instead of relying on a custom compatible or non-standard node
names.
Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org>
Message-Id: <20220203112337.19821-2-tony@atomide.com>
Tony Lindgren [Thu, 3 Feb 2022 11:23:35 +0000 (13:23 +0200)]
dt-bindings: omap: Add clock-output-names and #clock-cells
This allows us to use clock-output-names for the clock manager instance
name instead of relying on non-standard node names.
Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org>
Message-Id: <20220203112337.19821-1-tony@atomide.com>
Krzysztof Kozlowski [Sun, 27 Mar 2022 18:08:54 +0000 (11:08 -0700)]
ARM: dts: s5pv210: align DMA channels with dtschema
dtschema expects DMA channels in specific order (tx, rx and tx-sec).
The order actually should not matter because dma-names is used however
let's make it aligned with dtschema to suppress warnings like:
i2s@eee30000: dma-names: ['rx', 'tx', 'tx-sec'] is not valid under any of the given schemas
Jonathan Bakker [Sun, 27 Mar 2022 18:08:50 +0000 (11:08 -0700)]
ARM: dts: s5pv210: Remove spi-cs-high on panel in Aries
Since commit 766c6b63aa04 ("spi: fix client driver breakages when using
GPIO descriptors"), the panel has been blank due to an inverted CS GPIO.
In order to correct this, drop the spi-cs-high from the panel SPI device.
Krzysztof Kozlowski [Thu, 7 Apr 2022 20:41:15 +0000 (22:41 +0200)]
arm64: dts: synaptics: remove unused DTSI for AS370
The as370.dtsi for Synaptics AS370 SoC does not have a user (DTS board
file), is uncompilable and untestable. It was added back in 2018. No
user appeared since that time, so assume it won't be added.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Krzysztof Kozlowski [Mon, 4 Apr 2022 16:56:11 +0000 (18:56 +0200)]
ARM: dts: s5pv210: Use standard arrays of generic PHYs for EHCI/OHCI device
Move USB PHYs to a standard arrays for S5PV210 EHCI/OHCI devices. This
resolves the conflict between S5PV210 EHCI/OHCI sub-nodes and generic USB
device bindings.
Krzysztof Kozlowski [Mon, 4 Apr 2022 16:54:46 +0000 (18:54 +0200)]
ARM: dts: exynos: drop deprecated SFR region from MIPI phy
Commit e4b3d38088df ("phy: exynos-video-mipi: Fix regression by adding
support for PMU regmap") deprecated the usage of unit address in MIPI
phy node, in favor of a syscon phandle. Deprecating was a correct
approach because that unit address was actually coming from Power
Management Unit SFR range so its usage here caused overlapped memory
mapping.
In 2016 commit 26dbadba495f ("phy: exynos-mipi-video: Drop support for
direct access to PMU") fully removed support for parsing that MIPI phy
unit address (SFR range) but the address stayed in Exynos5250 DTSI for
compatibility reasons.
Remove that deprecated unit address from Exynos5250 MIPI phy, because it
has been almost 6 years since it was deprecated and it causes now DT
schema validation warnings:
video-phy@10040710: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
Any out-of-tree users of Exynos5250 DTSI, should update their code to
use newer syscon property.
Krzysztof Kozlowski [Mon, 4 Apr 2022 16:53:08 +0000 (18:53 +0200)]
arm64: dts: tesla: add a specific compatible to MCT on FSD
One compatible is used for the Multi-Core Timer on Tesla FSD SoC, which
is correct but not specific enough. The MCT blocks have different
number of interrupts, so add a second specific compatible to Tesla FSD.
Krzysztof Kozlowski [Mon, 4 Apr 2022 16:52:55 +0000 (18:52 +0200)]
arm64: dts: exynos: add a specific compatible to MCT
One compatible is used for the Multi-Core Timer on most of the Samsung
Exynos SoCs, which is correct but not specific enough. These MCT blocks
have different number of interrupts, so add a second specific
compatible to Exynos5433 and Exynos850.
Krzysztof Kozlowski [Mon, 4 Apr 2022 16:51:20 +0000 (18:51 +0200)]
ARM: dts: exynos: add a specific compatible to MCT
One compatible is used for the Multi-Core Timer on most of the Samsung
Exynos SoCs, which is correct but not specific enough. These MCT blocks
have different number of interrupts, so add a second specific
compatible to Exynos3250 and all Exynos5 SoCs.
Krzysztof Kozlowski [Mon, 4 Apr 2022 16:47:40 +0000 (18:47 +0200)]
arm64: dts: exynos: move aliases to board in Exynos850
The aliases for typical blocks which are disabled by default in DTSI
(like I2C, UART and MMC) should be defined in the board DTS. The board
should add aliases only for enabled blocks according to its specific
order.
On Exynos850, move aliases of enabled blocks to E850-96 board and remove
unused ones.
Oleksij Rempel [Wed, 16 Feb 2022 07:49:24 +0000 (08:49 +0100)]
ARM: dts: exynos: fix compatible strings for Ethernet USB devices
Fix compatible string for Ethernet USB device as required by USB device schema:
Documentation/devicetree/bindings/usb/usb-device.yaml
The textual representation of VID and PID shall be in lower case hexadecimal
with leading zeroes suppressed.
Since there are no kernel driver matching against this compatibles, I
expect no regressions with this patch. At the same time, without this fix, we
are not be able to validate this device nodes with newly provided DT
schema.
Oleksij Rempel [Wed, 16 Feb 2022 07:49:23 +0000 (08:49 +0100)]
ARM: dts: exynos: fix ethernet node name for different odroid boards
The node name of Ethernet controller should be "ethernet" instead of
"usbether" as required by Ethernet controller devicetree schema:
Documentation/devicetree/bindings/net/ethernet-controller.yaml
This patch can potentially affect boot loaders patching against full
node path instead of using device aliases.
Kieran Bingham [Wed, 9 Mar 2022 19:06:31 +0000 (19:06 +0000)]
arm64: dts: renesas: falcon-cpu: Use INTC_EX for SN65DSI86
The INTC block is a better choice for handling the interrupts on the V3U
as the INTC will always be powered, while the GPIO block may be
de-clocked if not in use. Further more, it may be likely to have a lower
power consumption as it does not need to drive the pins.
Switch the interrupt parent and interrupts definition from gpio1 to
irq0 on intc_ex, and configure the PFC accordingly.
Biju Das [Thu, 3 Mar 2022 16:41:55 +0000 (16:41 +0000)]
arm64: dts: renesas: rzg2lc-smarc: Enable Audio
Enable Audio on RZ/G2LC SMARC EVK by deleting ssi0 entries from
board DT and adding pincontrol entries to the soc-pinctrl dtsi,
so that entries from common dtsi kick in and make audio functionality
operational.
Enable i2c{0,1} on RZ/G2LC SMARC EVK by deleting respective
entries from board dts and adding pincontrol entries to the
soc-pinctrl dtsi. Also enable i2c2 by adding to soc dtsi.
Biju Das [Thu, 3 Mar 2022 16:41:53 +0000 (16:41 +0000)]
arm64: dts: renesas: rzg2l-smarc: Move out i2c3 and Audio codec from common dtsi
On RZ/G2L SoM module, the Audio codec is connected to i2c3 bus whereas on
RZ/G2LC, it is connected to i2c2 bus. So move out i2c3 and wm8978 nodes
from common dtsi to soc specific dtsi.
While at it add wm8978 node to RZ/G2LC SoC specific dtsi to fix the
build error.
Enable usb2.0 host/device functionality on RZ/G2LC SMARC EVK
by deleting phyrst, usb2_phy{0,1}, ehci/ohci{0,1} and hsusb
entries from board DT, so that entries from common dtsi kick
in and make USB2.0 functionality operational.
Add DT binding documentation for SYSC controller found on RZ/G2UL SoC's.
SYSC controller found on the RZ/G2UL SoC is almost identical to one found
on the RZ/G2L SoC's only difference being that the RZ/G2UL has only CA55
core0 reset vector address configuration register.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220315142644.17660-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Merge tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull more tracing updates from Steven Rostedt:
- Rename the staging files to give them some meaning. Just
stage1,stag2,etc, does not show what they are for
- Check for NULL from allocation in bootconfig
- Hold event mutex for dyn_event call in user events
- Mark user events to broken (to work on the API)
- Remove eBPF updates from user events
- Remove user events from uapi header to keep it from being installed.
- Move ftrace_graph_is_dead() into inline as it is called from hot
paths and also convert it into a static branch.
* tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Move user_events.h temporarily out of include/uapi
ftrace: Make ftrace_graph_is_dead() a static branch
tracing: Set user_events to BROKEN
tracing/user_events: Remove eBPF interfaces
tracing/user_events: Hold event_mutex during dyn_event_add
proc: bootconfig: Add null pointer check
tracing: Rename the staging files for trace_events
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"A single revert to fix a boot regression seen when clk_put() started
dropping rate range requests. It's best to keep various systems
booting so we'll kick this out and try again next time"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
Revert "clk: Drop the rate range on clk_put()"
Merge tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes and updates:
- Make the prctl() for enabling dynamic XSTATE components correct so
it adds the newly requested feature to the permission bitmap
instead of overwriting it. Add a selftest which validates that.
- Unroll string MMIO for encrypted SEV guests as the hypervisor
cannot emulate it.
- Handle supervisor states correctly in the FPU/XSTATE code so it
takes the feature set of the fpstate buffer into account. The
feature sets can differ between host and guest buffers. Guest
buffers do not contain supervisor states. So far this was not an
issue, but with enabling PASID it needs to be handled in the buffer
offset calculation and in the permission bitmaps.
- Avoid a gazillion of repeated CPUID invocations in by caching the
values early in the FPU/XSTATE code.
- Enable CONFIG_WERROR in x86 defconfig.
- Make the X86 defconfigs more useful by adapting them to Y2022
reality"
* tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/xstate: Consolidate size calculations
x86/fpu/xstate: Handle supervisor states in XSTATE permissions
x86/fpu/xsave: Handle compacted offsets correctly with supervisor states
x86/fpu: Cache xfeature flags from CPUID
x86/fpu/xsave: Initialize offset/size cache early
x86/fpu: Remove unused supervisor only offsets
x86/fpu: Remove redundant XCOMP_BV initialization
x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO
x86/config: Make the x86 defconfigs a bit more usable
x86/defconfig: Enable WERROR
selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test
x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation
Merge tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RT signal fix from Thomas Gleixner:
"Revert the RT related signal changes. They need to be reworked and
generalized"
* tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"
Merge tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping
Pull more dma-mapping updates from Christoph Hellwig:
- fix a regression in dma remap handling vs AMD memory encryption (me)
- finally kill off the legacy PCI DMA API (Christophe JAILLET)
* tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: move pgprot_decrypted out of dma_pgprot
PCI/doc: cleanup references to the legacy PCI DMA API
PCI: Remove the deprecated "pci-dma-compat.h" API
Stephen Boyd [Sun, 3 Apr 2022 02:28:18 +0000 (19:28 -0700)]
Revert "clk: Drop the rate range on clk_put()"
This reverts commit 7dabfa2bc4803eed83d6f22bd6f045495f40636b. There are
multiple reports that this breaks boot on various systems. The common
theme is that orphan clks are having rates set on them when that isn't
expected. Let's revert it out for now so that -rc1 boots.
Merge tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Avoid SEGV if core.cpus isn't set in 'perf stat'.
- Stop depending on .git files for building PERF-VERSION-FILE, used in
'perf --version', fixing some perf tools build scenarios.
- Convert tracepoint.py example to python3.
- Update UAPI header copies from the kernel sources: socket,
mman-common, msr-index, KVM, i915 and cpufeatures.
- Update copy of libbpf's hashmap.c.
- Directly return instead of using local ret variable in
evlist__create_syswide_maps(), found by coccinelle.
* tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf python: Convert tracepoint.py example to python3
perf evlist: Directly return instead of using local ret variable
perf cpumap: More cpu map reuse by merge.
perf cpumap: Add is_subset function
perf evlist: Rename cpus to user_requested_cpus
perf tools: Stop depending on .git files for building PERF-VERSION-FILE
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools kvm headers arm64: Update KVM headers from the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers UAPI: Sync asm-generic/mman-common.h with the kernel
perf beauty: Update copy of linux/socket.h with the kernel sources
perf tools: Update copy of libbpf's hashmap.c
perf stat: Avoid SEGV if core.cpus isn't set
Merge tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix empty $(PYTHON) expansion.
- Fix UML, which got broken by the attempt to suppress Clang warnings.
- Fix warning message in modpost.
* tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: restore the warning message for missing symbol versions
Revert "um: clang: Strip out -mno-global-merge from USER_CFLAGS"
kbuild: Remove '-mno-global-merge'
kbuild: fix empty ${PYTHON} in scripts/link-vmlinux.sh
kconfig: remove stale comment about removed kconfig_print_symbol()
Merge tag 'mips_5.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- build fix for gpio
- fix crc32 build problems
- check for failed memory allocations
* tag 'mips_5.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: crypto: Fix CRC32 code
MIPS: rb532: move GPIOD definition into C-files
MIPS: lantiq: check the return value of kzalloc()
mips: sgi-ip22: add a check for the return of kzalloc()
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
- Documentation improvements
- Prevent module exit until all VMs are freed
- PMU Virtualization fixes
- Fix for kvm_irq_delivery_to_apic_fast() NULL-pointer dereferences
- Other miscellaneous bugfixes
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
KVM: x86: fix sending PV IPI
KVM: x86/mmu: do compare-and-exchange of gPTE via the user address
KVM: x86: Remove redundant vm_entry_controls_clearbit() call
KVM: x86: cleanup enter_rmode()
KVM: x86: SVM: fix tsc scaling when the host doesn't support it
kvm: x86: SVM: remove unused defines
KVM: x86: SVM: move tsc ratio definitions to svm.h
KVM: x86: SVM: fix avic spec based definitions again
KVM: MIPS: remove reference to trap&emulate virtualization
KVM: x86: document limitations of MSR filtering
KVM: x86: Only do MSR filtering when access MSR by rdmsr/wrmsr
KVM: x86/emulator: Emulate RDPID only if it is enabled in guest
KVM: x86/pmu: Fix and isolate TSX-specific performance event logic
KVM: x86: mmu: trace kvm_mmu_set_spte after the new SPTE was set
KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs
KVM: x86: Trace all APICv inhibit changes and capture overall status
KVM: x86: Add wrappers for setting/clearing APICv inhibits
KVM: x86: Make APICv inhibit reasons an enum and cleanup naming
KVM: X86: Handle implicit supervisor access with SMAP
KVM: X86: Rename variable smap to not_smap in permission_fault()
...
projects / linux.git / log