Maher Sanalla [Thu, 13 Mar 2025 14:20:17 +0000 (16:20 +0200)]
IB/mad: Check available slots before posting receive WRs
The ib_post_receive_mads() function handles posting receive work
requests (WRs) to MAD QPs and is called in two cases:
1) When a MAD port is opened.
2) When a receive WQE is consumed upon receiving a new MAD.
Whereas, if MADs arrive during the port open phase, a race condition
might cause an extra WR to be posted, exceeding the QP’s capacity.
This leads to failures such as:
infiniband mlx5_0: ib_post_recv failed: -12
infiniband mlx5_0: Couldn't post receive WRs
infiniband mlx5_0: Couldn't start port
infiniband mlx5_0: Couldn't open port 1
Fix this by checking the current receive count before posting a new WR.
If the QP’s receive queue is full, do not post additional WRs.
Chiara Meiohas [Thu, 13 Mar 2025 14:29:54 +0000 (16:29 +0200)]
RDMA/mlx5: Fix calculation of total invalidated pages
When invalidating an address range in mlx5, there is an optimization to
do UMR operations in chunks.
Previously, the invalidation counter was incorrectly updated for the
same indexes within a chunk. Now, the invalidation counter is updated
only when a chunk is complete and mlx5r_umr_update_xlt() is called.
This ensures that the counter accurately represents the number of pages
invalidated using UMR.
Patrisious Haddad [Thu, 13 Mar 2025 14:29:53 +0000 (16:29 +0200)]
RDMA/mlx5: Fix mlx5_poll_one() cur_qp update flow
When cur_qp isn't NULL, in order to avoid fetching the QP from
the radix tree again we check if the next cqe QP is identical to
the one we already have.
The bug however is that we are checking if the QP is identical by
checking the QP number inside the CQE against the QP number inside the
mlx5_ib_qp, but that's wrong since the QP number from the CQE is from
FW so it should be matched against mlx5_core_qp which is our FW QP
number.
Otherwise we could use the wrong QP when handling a CQE which could
cause the kernel trace below.
This issue is mainly noticeable over QPs 0 & 1, since for now they are
the only QPs in our driver whereas the QP number inside mlx5_ib_qp
doesn't match the QP number inside mlx5_core_qp.
Michael Guralnik [Thu, 13 Mar 2025 14:29:51 +0000 (16:29 +0200)]
RDMA/mlx5: Fix page_size variable overflow
Change all variables storing mlx5_umem_mkc_find_best_pgsz() result to
unsigned long to support values larger than 31 and avoid overflow.
For example: If we try to register 4GB of memory that is contiguous in
physical memory, the driver will optimize the page_size and try to use
an mkey with 4GB entity size. The 'unsigned int' page_size variable will
overflow to '0' and we'll hit the WARN_ON() in alloc_cacheable_mr().
Michael Guralnik [Thu, 13 Mar 2025 14:29:49 +0000 (16:29 +0200)]
RDMA/mlx5: Fix cache entry update on dereg error
Fix double decrement of 'in_use' counter on push_mkey_locked() failure
while deregistering an MR.
If we fail to return an mkey to the cache in cache_ent_find_and_store()
it'll update the 'in_use' counter. Its caller, revoke_mr(), also updates
it, thus having double decrement.
Wrong value of 'in_use' counter will be exposed through debugfs and can
also cause wrong resizing of the cache when users try to set cache
entry size using the 'size' debugfs.
To address this issue, the 'in_use' counter is now decremented within
mlx5_revoke_mr() also after a successful call to
cache_ent_find_and_store() and not within cache_ent_find_and_store().
Other success or failure flows remains unchanged where it was also
decremented.
Patrisious Haddad [Thu, 13 Mar 2025 14:18:46 +0000 (16:18 +0200)]
RDMA/mlx5: Support optional-counters binding for QPs
Add support to allow optional-counters binding to a QP, whereas when
a bind operation is requested depending on the counter optional-counter
binding state the driver will determine if to also add optional-counters
to this QP binding.
The optional-counter binding is done by simply adding a steering
rule for the specific optional-counter condition with the additional
match over that QP number.
Note that optional-counters per QP rules are handled on an earlier prio
than per device counters, and per device counter correctness is maintained
by core whereas it is responsible to sum active counters when checking device
counter and to add them to history count when they are deallocated.
Patrisious Haddad [Thu, 13 Mar 2025 14:18:43 +0000 (16:18 +0200)]
RDMA/core: Add support to optional-counters binding configuration
Whenever a new counter is created, save inside it the user requested
configuration for optional-counters binding, for manual configuration it
is requested directly by the user and for the automatic configuration it
depends on if the automatic binding was enabled with or without
optional-counters binding.
This argument will later be used by the driver to determine if to bind the
optional-counters as well or not when trying to bind this counter to a QP.
It indicates that when binding counters to a QP we also want the
currently enabled link optional-counters to be bound as well.
Patrisious Haddad [Thu, 13 Mar 2025 14:18:42 +0000 (16:18 +0200)]
RDMA/core: Create and destroy rdma_counter using rdma_zalloc_drv_obj()
Change rdma_counter allocation to use rdma_zalloc_drv_obj() instead of,
explicitly allocating at core, in order to be contained inside driver
specific structures.
Adjust all drivers that use it to have their containing structure, and
add driver specific initialization operation.
This change is needed to allow upcoming patches to implement
optional-counters binding whereas inside each driver specific counter
struct his bound optional-counters will be maintained.
Patrisious Haddad [Thu, 13 Mar 2025 14:18:41 +0000 (16:18 +0200)]
RDMA/mlx5: Add optional counters for RDMA_TX/RX_packets/bytes
Add the following optional counters:
rdma_tx_packets,rdma_rx_bytes,rdma_rx_packets,rdma_tx_bytes.
Which counts all RDMA packets/bytes sent and received per link.
Note that since each direction packet and byte counter are shared,
the counter is only reset when both counters of that direction
are removed. But from user-perspective each can be enabled/disabled separately.
The counters can be enabled using:
sudo rdma stat set link rocep8s0f0/1 optional-counters rdma_tx_packets
And can be seen using:
rdma stat -j show link rocep8s0f0/1
Wang Liang [Thu, 13 Mar 2025 09:24:21 +0000 (17:24 +0800)]
RDMA/core: Fix use-after-free when rename device name
Syzbot reported a slab-use-after-free with the following call trace:
==================================================================
BUG: KASAN: slab-use-after-free in nla_put+0xd3/0x150 lib/nlattr.c:1099
Read of size 5 at addr ffff888140ea1c60 by task syz.0.988/10025
This is because if rename device happens, the old name is freed in
ib_device_rename() with lock, but ib_device_notify_register() may visit
the dev name locklessly by event RDMA_REGISTER_EVENT or
RDMA_NETDEV_ATTACH_EVENT.
Fix this by hold devices_rwsem in ib_device_notify_register().
Reported-by: syzbot+f60349ba1f9f08df349f@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=25bc6f0ed2b88b9eb9b8 Fixes: 9cbed5aab5ae ("RDMA/nldev: Add support for RDMA monitoring") Signed-off-by: Wang Liang <wangliang74@huawei.com> Link: https://patch.msgid.link/20250313092421.944658-1-wangliang74@huawei.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
Preethi G [Thu, 13 Mar 2025 08:44:24 +0000 (01:44 -0700)]
RDMA/bnxt_re: Support perf management counters
Add support for process_mad hook to retrieve the perf management counters.
Supports IB_PMA_PORT_COUNTERS and IB_PMA_PORT_COUNTERS_EXT counters.
Query the data from HW contexts and FW commands.
Maher Sanalla [Wed, 26 Feb 2025 13:54:13 +0000 (15:54 +0200)]
RDMA/uverbs: Propagate errors from rdma_lookup_get_uobject()
Currently, the IB uverbs API calls uobj_get_uobj_read(), which in turn
uses the rdma_lookup_get_uobject() helper to retrieve user objects.
In case of failure, uobj_get_uobj_read() returns NULL, overriding the
error code from rdma_lookup_get_uobject(). The IB uverbs API then
translates this NULL to -EINVAL, masking the actual error and
complicating debugging. For example, applications calling ibv_modify_qp
that fails with EBUSY when retrieving the QP uobject will see the
overridden error code EINVAL instead, masking the actual error.
Furthermore, based on rdma-core commit:
"2a22f1ced5f3 ("Merge pull request #1568 from jakemoroni/master")"
Kernel's IB uverbs return values are either ignored and passed on as is
to application or overridden with other errnos in a few cases.
Thus, to improve error reporting and debuggability, propagate the
original error from rdma_lookup_get_uobject() instead of replacing it
with EINVAL.
Long Li [Wed, 12 Mar 2025 23:15:32 +0000 (16:15 -0700)]
RDMA/mana_ib: Handle net event for pointing to the current netdev
When running under Hyper-V, the master device to the RDMA device is always
bonded to this RDMA device. This is not user-configurable.
The master device can be unbind/bind from the kernel. During those events,
the RDMA device should set to the current netdev to reflect the change of
master device from those events.
Long Li [Wed, 12 Mar 2025 23:15:31 +0000 (16:15 -0700)]
net: mana: Change the function signature of mana_get_primary_netdev_rcu
Change mana_get_primary_netdev_rcu() to mana_get_primary_netdev(), and
return the ndev with refcount held. The caller is responsible for dropping
the refcount.
Also drop the check for IFF_SLAVE as it is not necessary if the upper
device is present.
Chiara Meiohas [Thu, 6 Mar 2025 11:51:29 +0000 (13:51 +0200)]
RDMA/mlx5: Check enabled UCAPs when creating ucontext
Verify that the enabled UCAPs are supported by the device before
creating the ucontext.
If supported, create the ucontext with the associated capabilities.
Store the privileged ucontext UID on creation and remove it when
destroying the privileged ucontext. This allows the command interface
to recognize privileged commands through its UID.
Chiara Meiohas [Thu, 6 Mar 2025 11:51:27 +0000 (13:51 +0200)]
RDMA/mlx5: Create UCAP char devices for supported device capabilities
Create UCAP character devices when probing an IB device with supported
firmware capabilities.
If the RDMA_CTRL general object type is supported, check for specific
UCTX capabilities:
Create /dev/infiniband/mlx5_perm_ctrl_local for RDMA_UCAP_MLX5_CTRL_LOCAL
Create /dev/infiniband/mlx5_perm_ctrl_other_vhca for RDMA_UCAP_MLX5_CTRL_OTHER_VHCA
Chiara Meiohas [Thu, 6 Mar 2025 11:51:26 +0000 (13:51 +0200)]
RDMA/uverbs: Introduce UCAP (User CAPabilities) API
Implement a new User CAPabilities (UCAP) API to provide fine-grained
control over specific firmware features.
This approach offers more granular capabilities than the existing Linux
capabilities, which may be too generic for certain FW features.
This mechanism represents each capability as a character device with
root read-write access. Root processes can grant users special
privileges by allowing access to these character devices (e.g., using
chown).
UCAP character devices are located in /dev/infiniband and the class path
is /sys/class/infiniband_ucaps.
Dan Carpenter [Thu, 6 Mar 2025 19:49:06 +0000 (22:49 +0300)]
RDMA/mana_ib: Use safer allocation function()
My static checker says this multiplication can overflow. I'm not an
expert in this code but the call tree would be:
ib_uverbs_handler_UVERBS_METHOD_QP_CREATE() <- reads cap from the user
-> ib_create_qp_user()
-> create_qp()
-> mana_ib_create_qp()
-> mana_ib_create_ud_qp()
-> create_shadow_queue()
This is preparation series targeted for mlx5-next, which will be used
later in RDMA.
This series adds RDMA transport steering logic which would allow the
vport group manager to catch control packets from VFs and forward them
to control SW to help with congestion control.
In addition, RDMA will provide new set of APIs to better control exposed
FW capabilities and this series is needed to make sure mlx5 command
interface will ensure that privileged commands can always proceed,
Thanks
Link: https://lore.kernel.org/all/cover.1740574103.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
* mlx5-next:
net/mlx5: fs, add RDMA TRANSPORT steering domain support
net/mlx5: Query ADV_RDMA capabilities
net/mlx5: Limit non-privileged commands
net/mlx5: Allow the throttle mechanism to be more dynamic
net/mlx5: Add RDMA_CTRL HW capabilities
Chiara Meiohas [Wed, 26 Feb 2025 13:01:07 +0000 (15:01 +0200)]
net/mlx5: Limit non-privileged commands
Limit non-privileged UID commands to half of the available command slots
when privileged UIDs are present.
Privileged throttle commands will not be limited.
Use an xarray to store privileged UIDs. Add insert and remove functions
for privileged UIDs management.
Chiara Meiohas [Wed, 26 Feb 2025 13:01:06 +0000 (15:01 +0200)]
net/mlx5: Allow the throttle mechanism to be more dynamic
Previously, throttle commands were identified and limited based on
opcode. These commands were limited to half the command slots using a
semaphore, and callback commands checked the opcode to determine
semaphore release.
To allow exceptions, we introduce a variable to indicate when the
throttle lock is held. This allows scenarios where throttle commands
are not limited. Callback functions use this variable to determine
if the throttle semaphore needs to be released.
This patch contains no functional changes. It's a preparation for the
next patch.
pvrdma_modify_device() was added in 2016 as part of
commit 29c8d9eba550 ("IB: Add vmw_pvrdma driver")
but accidentally it was never wired into the device_ops struct.
After some discussion the best course seems to be just to remove it,
see discussion at:
https://lore.kernel.org/all/Z8TWF6coBUF3l_jk@gallifrey/
Christian Göttsche [Sun, 2 Mar 2025 16:06:47 +0000 (17:06 +0100)]
RDMA/mlx5: Reorder capability check last
capable() calls refer to enabled LSMs whether to permit or deny the
request. This is relevant in connection with SELinux, where a
capability check results in a policy decision and by default a denial
message on insufficient permission is issued.
It can lead to three undesired cases:
1. A denial message is generated, even in case the operation was an
unprivileged one and thus the syscall succeeded, creating noise.
2. To avoid the noise from 1. the policy writer adds a rule to ignore
those denial messages, hiding future syscalls, where the task
performs an actual privileged operation, leading to hidden limited
functionality of that task.
3. To avoid the noise from 1. the policy writer adds a rule to permit
the task the requested capability, while it does not need it,
violating the principle of least privilege.
Roman Gushchin [Thu, 27 Feb 2025 16:54:20 +0000 (16:54 +0000)]
RDMA/core: Don't expose hw_counters outside of init net namespace
Commit 467f432a521a ("RDMA/core: Split port and device counter sysfs
attributes") accidentally almost exposed hw counters to non-init net
namespaces. It didn't expose them fully, as an attempt to read any of
those counters leads to a crash like this one:
The problem can be reproduced using the following steps:
ip netns add foo
ip netns exec foo bash
cat /sys/class/infiniband/mlx4_0/hw_counters/*
The panic occurs because of casting the device pointer into an
ib_device pointer using container_of() in hw_stat_device_show() is
wrong and leads to a memory corruption.
However the real problem is that hw counters should never been exposed
outside of the non-init net namespace.
Fix this by saving the index of the corresponding attribute group
(it might be 1 or 2 depending on the presence of driver-specific
attributes) and zeroing the pointer to hw_counters group for compat
devices during the initialization.
With this fix applied hw_counters are not available in a non-init
net namespace:
find /sys/class/infiniband/mlx4_0/ -name hw_counters
/sys/class/infiniband/mlx4_0/ports/1/hw_counters
/sys/class/infiniband/mlx4_0/ports/2/hw_counters
/sys/class/infiniband/mlx4_0/hw_counters
ip netns add foo
ip netns exec foo bash
find /sys/class/infiniband/mlx4_0/ -name hw_counters
Fixes: 467f432a521a ("RDMA/core: Split port and device counter sysfs attributes") Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Leon Romanovsky <leon@kernel.org> Cc: Maher Sanalla <msanalla@nvidia.com> Cc: linux-rdma@vger.kernel.org Cc: linux-kernel@vger.kernel.org Link: https://patch.msgid.link/20250227165420.3430301-1-roman.gushchin@linux.dev Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
Eric Biggers [Thu, 27 Feb 2025 05:12:07 +0000 (21:12 -0800)]
RDMA/siw: Switch to using the crc32c library
Now that the crc32c() library function directly takes advantage of
architecture-specific optimizations, it is unnecessary to go through the
crypto API. Just use crc32c(). This is much simpler, and it improves
performance due to eliminating the crypto API overhead.
Leon Romanovsky [Tue, 25 Feb 2025 09:04:46 +0000 (04:04 -0500)]
Merge branch 'mlx5-next' into wip/leon-for-next
This is merge of shared branch between RDMA and net-next trees.
* mlx5-next: (550 commits)
net/mlx5: Change POOL_NEXT_SIZE define value and make it global
net/mlx5: Add new health syndrome error and crr bit offset
Linux 6.14-rc3
...
Kees Bakker [Fri, 21 Feb 2025 19:39:03 +0000 (20:39 +0100)]
RDMA/mana_ib: Ensure variable err is initialized
In the function mana_ib_gd_create_dma_region if there are no dma blocks
to process the variable `err` remains uninitialized.
Fixes: 0266a177631d ("RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter") Signed-off-by: Kees Bakker <kees@ijzerbout.nl> Link: https://patch.msgid.link/20250221195833.7516C16290A@bout3.ijzerbout.nl Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
Patrisious Haddad [Wed, 19 Feb 2025 08:58:08 +0000 (10:58 +0200)]
net/mlx5: Change POOL_NEXT_SIZE define value and make it global
Change POOL_NEXT_SIZE define value from 0 to BIT(30), since this define
is used to request the available maximum sized flow table, and zero doesn't
make sense for it, whereas some places in the driver use zero explicitly
expecting the smallest table size possible but instead due to this
define they end up allocating the biggest table size unawarely.
In addition move the definition to "include/linux/mlx5/fs.h" to expose the
define to IB driver as well, while appropriately renaming it.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250219085808.349923-3-tariqt@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
Daisuke Matsuda [Fri, 20 Dec 2024 10:09:36 +0000 (19:09 +0900)]
RDMA/rxe: Add support for the traditional Atomic operations with ODP
Enable 'fetch and add' and 'compare and swap' operations to be used with
ODP. This is comprised of the following steps:
1. Check the driver page table(umem_odp->dma_list) to see if the target
page is both readable and writable.
2. If not, then trigger page fault to map the page.
3. Convert its user space address to a kernel logical address using PFNs
in the driver page table(umem_odp->pfn_list).
4. Execute the operation.
Daisuke Matsuda [Fri, 20 Dec 2024 10:09:35 +0000 (19:09 +0900)]
RDMA/rxe: Add support for Send/Recv/Write/Read with ODP
rxe_mr_copy() is used widely to copy data to/from a user MR. requester uses
it to load payloads of requesting packets; responder uses it to process
Send, Write, and Read operaetions; completer uses it to copy data from
response packets of Read and Atomic operations to a user MR.
Allow these operations to be used with ODP by adding a subordinate function
rxe_odp_mr_copy(). It is comprised of the following steps:
1. Check the driver page table(umem_odp->dma_list) to see if pages being
accessed are present with appropriate permission.
2. If necessary, trigger page fault to map the pages.
3. Convert their user space addresses to kernel logical addresses using
PFNs in the driver page table(umem_odp->pfn_list).
4. Execute data copy to/from the pages.
Daisuke Matsuda [Fri, 20 Dec 2024 10:09:34 +0000 (19:09 +0900)]
RDMA/rxe: Allow registering MRs for On-Demand Paging
Allow userspace to register an ODP-enabled MR, in which case the flag
IB_ACCESS_ON_DEMAND is passed to rxe_reg_user_mr(). However, there is no
RDMA operation enabled right now. They will be supported later in the
subsequent two patches.
rxe_odp_do_pagefault() is called to initialize an ODP-enabled MR. It syncs
process address space from the CPU page table to the driver page table
(dma_list/pfn_list in umem_odp) when called with RXE_PAGEFAULT_SNAPSHOT
flag. Additionally, It can be used to trigger page fault when pages being
accessed are not present or do not have proper read/write permissions, and
possibly to prefetch pages in the future.
Daisuke Matsuda [Fri, 20 Dec 2024 10:09:33 +0000 (19:09 +0900)]
RDMA/rxe: Add page invalidation support
On page invalidation, an MMU notifier callback is invoked to unmap DMA
addresses and update the driver page table(umem_odp->dma_list). The
callback is registered when an ODP-enabled MR is created.
Michael Margolin [Mon, 17 Feb 2025 14:16:23 +0000 (14:16 +0000)]
RDMA/core: Fix best page size finding when it can cross SG entries
A single scatter-gather entry is limited by a 32 bits "length" field
that is practically 4GB - PAGE_SIZE. This means that even when the
memory is physically contiguous, we might need more than one entry to
represent it. Additionally when using dmabuf, the sg_table might be
originated outside the subsystem and optimized for other needs.
For instance an SGT of 16GB GPU continuous memory might look like this:
(a real life example)
Since ib_umem_find_best_pgsz works within SG entries, in the above case
we will result with the worst possible 4KB page size.
Fix this by taking into consideration only the alignment of addresses of
real discontinuity points rather than treating SG entries as such, and
adjust the page iterator to correctly handle cross SG entry pages.
There is currently an assumption that drivers do not ask for pages
bigger than maximal DMA size supported by their devices.
Reviewed-by: Firas Jahjah <firasj@amazon.com> Reviewed-by: Yonatan Nachum <ynachum@amazon.com> Signed-off-by: Michael Margolin <mrgolin@amazon.com> Link: https://patch.msgid.link/20250217141623.12428-1-mrgolin@amazon.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
Linus Torvalds [Sun, 16 Feb 2025 20:58:51 +0000 (12:58 -0800)]
Merge tag 'kbuild-fixes-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix annoying logs when building tools in parallel
- Fix the Debian linux-headers package build again
- Fix the target triple detection for userspace programs on Clang
* tag 'kbuild-fixes-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: Fix a few typos in a comment
kbuild: userprogs: fix bitsize and target detection on clang
kbuild: fix linux-headers package build when $(CC) cannot link userspace
tools: fix annoying "mkdir -p ..." logs when building tools in parallel
Linus Torvalds [Sun, 16 Feb 2025 20:54:42 +0000 (12:54 -0800)]
Merge tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core api addition from Greg KH:
"Here is a driver core new api for 6.14-rc3 that is being added to
allow platform devices from stop being abused.
It adds a new 'faux_device' structure and bus and api to allow almost
a straight or simpler conversion from platform devices that were not
really a platform device. It also comes with a binding for rust, with
an example driver in rust showing how it's used.
I'm adding this now so that the patches that convert the different
drivers and subsystems can all start flowing into linux-next now
through their different development trees, in time for 6.15-rc1.
We have a number that are already reviewed and tested, but adding
those conversions now doesn't seem right. For now, no one is using
this, and it passes all build tests from 0-day and linux-next, so all
should be good"
* tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
rust/kernel: Add faux device bindings
driver core: add a faux bus for use when a simple device/bus is needed
Linus Torvalds [Sun, 16 Feb 2025 19:15:50 +0000 (11:15 -0800)]
Merge tag 'usb-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes, and new device ids, for
6.14-rc3. Lots of tiny stuff for reported problems, including:
- new device ids and quirks
- usb hub crash fix found by syzbot
- dwc2 driver fix
- dwc3 driver fixes
- uvc gadget driver fix
- cdc-acm driver fixes for a variety of different issues
- other tiny bugfixes
Almost all of these have been in linux-next this week, and all have
passed 0-day testing"
* tag 'usb-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
usb: typec: tcpm: PSSourceOffTimer timeout in PR_Swap enters ERROR_RECOVERY
usb: roles: set switch registered flag early on
usb: gadget: uvc: Fix unstarted kthread worker
USB: quirks: add USB_QUIRK_NO_LPM quirk for Teclast dist
usb: gadget: core: flush gadget workqueue after device removal
USB: gadget: f_midi: f_midi_complete to call queue_work
usb: core: fix pipe creation for get_bMaxPacketSize0
usb: dwc3: Fix timeout issue during controller enter/exit from halt state
USB: Add USB_QUIRK_NO_LPM quirk for sony xperia xz1 smartphone
USB: cdc-acm: Fill in Renesas R-Car D3 USB Download mode quirk
usb: cdc-acm: Fix handling of oversized fragments
usb: cdc-acm: Check control transfer buffer size before access
usb: xhci: Restore xhci_pci support for Renesas HCs
USB: pci-quirks: Fix HCCPARAMS register error for LS7A EHCI
USB: serial: option: drop MeiG Smart defines
USB: serial: option: fix Telit Cinterion FN990A name
USB: serial: option: add Telit Cinterion FN990B compositions
USB: serial: option: add MeiG Smart SLM828
usb: gadget: f_midi: fix MIDI Streaming descriptor lengths
usb: dwc2: gadget: remove of_node reference upon udc_stop
...
Linus Torvalds [Sun, 16 Feb 2025 18:41:50 +0000 (10:41 -0800)]
Merge tag 'perf_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fixes from Borislav Petkov:
- Explicitly clear DEBUGCTL.LBR to prevent LBRs continuing being
enabled after handoff to the OS
- Check CPUID(0x23) leaf and subleafs presence properly
- Remove the PEBS-via-PT feature from being supported on hybrid systems
- Fix perf record/top default commands on systems without a raw PMU
registered
* tag 'perf_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Ensure LBRs are disabled when a CPU is starting
perf/x86/intel: Fix ARCH_PERFMON_NUM_COUNTER_LEAF
perf/x86/intel: Clean up PEBS-via-PT on hybrid
perf/x86/rapl: Fix the error checking order
Linus Torvalds [Sun, 16 Feb 2025 18:25:12 +0000 (10:25 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Large set of fixes for vector handling, especially in the
interactions between host and guest state.
This fixes a number of bugs affecting actual deployments, and
greatly simplifies the FP/SIMD/SVE handling. Thanks to Mark Rutland
for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours
- Fix use of kernel VAs at EL2 when emulating timers with nVHE
- Small set of pKVM improvements and cleanups
x86:
- Fix broken SNP support with KVM module built-in, ensuring the PSP
module is initialized before KVM even when the module
infrastructure cannot be used to order initcalls
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being
emulated by KVM to fix a NULL pointer dereference
- Enter guest mode (L2) from KVM's perspective before initializing
the vCPU's nested NPT MMU so that the MMU is properly tagged for
L2, not L1
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as
the guest's value may be stale if a VM-Exit is handled in the
fastpath"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
x86/sev: Fix broken SNP support with KVM module built-in
KVM: SVM: Ensure PSP module is initialized if KVM module is built-in
crypto: ccp: Add external API interface for PSP module initialization
KVM: arm64: vgic: Hoist SGI/PPI alloc from vgic_init() to kvm_create_vgic()
KVM: arm64: timer: Drop warning on failed interrupt signalling
KVM: arm64: Fix alignment of kvm_hyp_memcache allocations
KVM: arm64: Convert timer offset VA when accessed in HYP code
KVM: arm64: Simplify warning in kvm_arch_vcpu_load_fp()
KVM: arm64: Eagerly switch ZCR_EL{1,2}
KVM: arm64: Mark some header functions as inline
KVM: arm64: Refactor exit handlers
KVM: arm64: Refactor CPTR trap deactivation
KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN
KVM: arm64: Remove VHE host restore of CPACR_EL1.ZEN
KVM: arm64: Remove host FPSIMD saving for non-protected KVM
KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state
KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop
KVM: nSVM: Enter guest mode before initializing nested NPT MMU
KVM: selftests: Add CPUID tests for Hyper-V features that need in-kernel APIC
KVM: selftests: Manage CPUID array in Hyper-V CPUID test's core helper
...
Linus Torvalds [Sun, 16 Feb 2025 18:19:41 +0000 (10:19 -0800)]
Merge tag 'mips-fixes_6.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
"Fix for o32 ptrace/get_syscall_info"
* tag 'mips-fixes_6.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: fix mips_get_syscall_arg() for o32
MIPS: Export syscall stack arguments properly for remote use
Linus Torvalds [Sun, 16 Feb 2025 01:14:53 +0000 (17:14 -0800)]
Merge tag 'uml-for-linus-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML fixes from Richard Weinberger:
- Align signal stack correctly
- Convert to raw spinlocks where needed (irq and virtio)
- FPU related fixes
* tag 'uml-for-linus-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: convert irq_lock to raw spinlock
um: virtio_uml: use raw spinlock
um: virt-pci: don't use kmalloc()
um: fix execve stub execution on old host OSs
um: properly align signal stack on x86_64
um: avoid copying FP state from init_task
um: add back support for FXSAVE registers
Linus Torvalds [Sun, 16 Feb 2025 00:34:41 +0000 (16:34 -0800)]
Merge tag 'trace-ring-buffer-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull trace ring buffer fixes from Steven Rostedt:
- Enable resize on mmap() error
When a process mmaps a ring buffer, its size is locked and resizing
is disabled. But if the user passes in a wrong parameter, the mmap()
can fail after the resize was disabled and the mmap() exits with
error without reenabling the ring buffer resize. This prevents the
ring buffer from ever being resized after that. Reenable resizing of
the ring buffer on mmap() error.
- Have resizing return proper error and not always -ENOMEM
If the ring buffer is mmapped by one task and another task tries to
resize the buffer it will error with -ENOMEM. This is confusing to
the user as there may be plenty of memory available. Have it return
the error that actually happens (in this case -EBUSY) where the user
can understand why the resize failed.
- Test the sub-buffer array to validate persistent memory buffer
On boot up, the initialization of the persistent memory buffer will
do a validation check to see if the content of the data is valid, and
if so, it will use the memory as is, otherwise it re-initializes it.
There's meta data in this persistent memory that keeps track of which
sub-buffer is the reader page and an array that states the order of
the sub-buffers. The values in this array are indexes into the
sub-buffers. The validator checks to make sure that all the entries
in the array are within the sub-buffer list index, but it does not
check for duplications.
While working on this code, the array got corrupted and had
duplicates, where not all the sub-buffers were accounted for. This
passed the validator as all entries were valid, but the link list was
incorrect and could have caused a crash. The corruption only produced
incorrect data, but it could have been more severe. To fix this,
create a bitmask that covers all the sub-buffer indexes and set it to
all zeros. While iterating the array checking the values of the array
content, have it set a bit corresponding to the index in the array.
If the bit was already set, then it is a duplicate and mark the
buffer as invalid and reset it.
- Prevent mmap()ing persistent ring buffer
The persistent ring buffer uses vmap() to map the persistent memory.
Currently, the mmap() logic only uses virt_to_page() to get the page
from the ring buffer memory and use that to map to user space. This
works because a normal ring buffer uses alloc_page() to allocate its
memory. But because the persistent ring buffer use vmap() it causes a
kernel crash.
Fixing this to work with vmap() is not hard, but since mmap() on
persistent memory buffers never worked, just have the mmap() return
-ENODEV (what was returned before mmap() for persistent memory ring
buffers, as they never supported mmap. Normal buffers will still
allow mmap(). Implementing mmap() for persistent memory ring buffers
can wait till the next merge window.
- Fix polling on persistent ring buffers
There's a "buffer_percent" option (default set to 50), that is used
to have reads of the ring buffer binary data block until the buffer
fills to that percentage. The field "pages_touched" is incremented
every time a new sub-buffer has content added to it. This field is
used in the calculations to determine the amount of content is in the
buffer and if it exceeds the "buffer_percent" then it will wake the
task polling on the buffer.
As persistent ring buffers can be created by the content from a
previous boot, the "pages_touched" field was not updated. This means
that if a task were to poll on the persistent buffer, it would block
even if the buffer was completely full. It would block even if the
"buffer_percent" was zero, because with "pages_touched" as zero, it
would be calculated as the buffer having no content. Update
pages_touched when initializing the persistent ring buffer from a
previous boot.
* tag 'trace-ring-buffer-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Update pages_touched to reflect persistent buffer content
tracing: Do not allow mmap() of persistent ring buffer
ring-buffer: Validate the persistent meta data subbuf array
tracing: Have the error of __tracing_resize_ring_buffer() passed to user
ring-buffer: Unlock resize on mmap error
Steven Rostedt [Fri, 14 Feb 2025 17:35:12 +0000 (12:35 -0500)]
ring-buffer: Update pages_touched to reflect persistent buffer content
The pages_touched field represents the number of subbuffers in the ring
buffer that have content that can be read. This is used in accounting of
"dirty_pages" and "buffer_percent" to allow the user to wait for the
buffer to be filled to a certain amount before it reads the buffer in
blocking mode.
The persistent buffer never updated this value so it was set to zero, and
this accounting would take it as it had no content. This would cause user
space to wait for content even though there's enough content in the ring
buffer that satisfies the buffer_percent.
Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Vincent Donnefort <vdonnefort@google.com> Link: https://lore.kernel.org/20250214123512.0631436e@gandalf.local.home Fixes: 5f3b6e839f3ce ("ring-buffer: Validate boot range memory events") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
But virt_to_page() does not work with vmap()'d memory which is what the
persistent ring buffer has. It is rather trivial to allow this, but for
now just disable mmap() of instances that have their ring buffer from the
reserve_mem option.
If an mmap() is performed on a persistent buffer it will return -ENODEV
just like it would if the .mmap field wasn't defined in the
file_operations structure.
Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Vincent Donnefort <vdonnefort@google.com> Link: https://lore.kernel.org/20250214115547.0d7287d3@gandalf.local.home Fixes: 9b7bdf6f6ece6 ("tracing: Have trace_printk not use binary prints if boot buffer") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Linus Torvalds [Sat, 15 Feb 2025 18:20:47 +0000 (10:20 -0800)]
Merge tag 'i2c-for-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"MAINTAINERS maintenance.
Changed email, added entry, deleted entry falling back to a generic
one"
* tag 'i2c-for-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Add maintainer for Qualcomm's I2C GENI driver
MAINTAINERS: delete entry for AXXIA I2C
MAINTAINERS: Use my kernel.org address for I2C ACPI work
Linus Torvalds [Sat, 15 Feb 2025 18:15:24 +0000 (10:15 -0800)]
Merge tag 's390-6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix isolated VFs handling by verifying that a VF’s parent PF is
locally owned before registering it in an existing PCI domain
- Disable arch_test_bit() optimization for PROFILE_ALL_BRANCHES to
workaround gcc failure in handling __builtin_constant_p() in this
case
- Fix CHPID "configure" attribute caching in CIO by not updating the
cache when SCLP returns no data, ensuring consistent sysfs output
- Remove CONFIG_LSM from default configs and rely on defaults, which
enables BPF LSM hook
* tag 's390-6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pci: Fix handling of isolated VFs
s390/pci: Pull search for parent PF out of zpci_iov_setup_virtfn()
s390/bitops: Disable arch_test_bit() optimization for PROFILE_ALL_BRANCHES
s390/cio: Fix CHPID "configure" attribute caching
s390/configs: Remove CONFIG_LSM
Thomas Weißschuh [Thu, 13 Feb 2025 14:55:17 +0000 (15:55 +0100)]
kbuild: userprogs: fix bitsize and target detection on clang
scripts/Makefile.clang was changed in the linked commit to move --target from
KBUILD_CFLAGS to KBUILD_CPPFLAGS, as that generally has a broader scope.
However that variable is not inspected by the userprogs logic,
breaking cross compilation on clang.
Use both variables to detect bitsize and target arguments for userprogs.
Linus Torvalds [Sat, 15 Feb 2025 17:54:46 +0000 (09:54 -0800)]
Merge tag 'rust-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
- Fix objtool warning due to future Rust 1.85.0 (to be released in a
few days)
- Clean future Rust 1.86.0 (to be released 2025-04-03) Clippy warning
* tag 'rust-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: rbtree: fix overindented list item
objtool/rust: add one more `noreturn` Rust function
which causes problems on 32-bit x86 configurations that have 64-bit
resource sizes:
x86_64-linux-ld: drivers/dma/tegra210-adma.o: in function `tegra_adma_probe':
tegra210-adma.c:(.text+0x1322): undefined reference to `__udivdi3'
because gcc doesn't generate the trivial code for a 64-by-32 divide,
turning it into a function call to do a full 64-by-64 divide. And the
kernel intentionally doesn't provide that helper function, because 99%
of the time all you want is the narrower version.
Of course, tegra210 is a 64-bit architecture and the 32-bit x86 build is
purely for build testing, so this really is just about build coverage
failure.
But build coverage is good.
Side note: div_u64() would be suboptimal if you actually have a 32-bit
resource_t, so our "helper" for divides are admittedly making it harder
than it should be to generate good code for all the possible cases.
At some point, I'll consider 32-bit x86 so entirely legacy that I can't
find it in myself to care any more, and we'll just add the __udivdi3
library function.
But for now, the right thing to do is to use "div_u64()" to show that
you know that you are doing the simpler divide with a 32-bit number.
And the build error enforces that.
While fixing the build issue, also check for division-by-zero, and for
overflow. Which hopefully cannot happen on real production hardware,
but the value of 'ch_base_offset' can definitely be zero in other
places.
Linus Torvalds [Sat, 15 Feb 2025 16:13:45 +0000 (08:13 -0800)]
Merge tag 'gpio-fixes-for-v6.14-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix interrupt handling issues in gpio-bcm-kona
- add an ACPI quirk for Acer Nitro ANV14 fixing an issue with spurious
wake up events
- add missing return value checks to gpio-stmpe
- fix a crash in error path in gpiochip_get_ngpios()
* tag 'gpio-fixes-for-v6.14-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: Fix crash on error in gpiochip_get_ngpios()
gpio: stmpe: Check return value of stmpe_reg_read in stmpe_gpio_irq_sync_unlock
gpiolib: acpi: Add a quirk for Acer Nitro ANV14
gpio: bcm-kona: Add missing newline to dev_err format string
gpio: bcm-kona: Make sure GPIO bits are unlocked when requesting IRQ
gpio: bcm-kona: Fix GPIO lock/unlock for banks above bank 0
Masahiro Yamada [Thu, 13 Feb 2025 06:26:44 +0000 (15:26 +0900)]
kbuild: fix linux-headers package build when $(CC) cannot link userspace
Since commit 5f73e7d0386d ("kbuild: refactor cross-compiling
linux-headers package"), the linux-headers Debian package fails to
build when $(CC) cannot build userspace applications, for example,
when using toolchains installed by the 0day bot.
The host programs in the linux-headers package should be rebuilt using
the disto's cross-compiler, ${DEB_HOST_GNU_TYPE}-gcc instead of $(CC).
Hence, the variable 'CC' must be expanded in this shell script instead
of in the top-level Makefile.
Commit f354fc88a72a ("kbuild: install-extmod-build: add missing
quotation marks for CC variable") was not a correct fix because
CC="ccache gcc" should be unrelated when rebuilding userspace tools.
Fixes: 5f73e7d0386d ("kbuild: refactor cross-compiling linux-headers package") Reported-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Closes: https://lore.kernel.org/linux-kbuild/CAK7LNARb3xO3ptBWOMpwKcyf3=zkfhMey5H2KnB1dOmUwM79dA@mail.gmail.com/T/#t Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Masahiro Yamada [Tue, 11 Feb 2025 00:29:06 +0000 (09:29 +0900)]
tools: fix annoying "mkdir -p ..." logs when building tools in parallel
When CONFIG_OBJTOOL=y or CONFIG_DEBUG_INFO_BTF=y, parallel builds
show awkward "mkdir -p ..." logs.
$ make -j16
[ snip ]
mkdir -p /home/masahiro/ref/linux/tools/objtool && make O=/home/masahiro/ref/linux subdir=tools/objtool --no-print-directory -C objtool
mkdir -p /home/masahiro/ref/linux/tools/bpf/resolve_btfids && make O=/home/masahiro/ref/linux subdir=tools/bpf/resolve_btfids --no-print-directory -C bpf/resolve_btfids
Defining MAKEFLAGS=<value> on the command line wipes out command line
switches from the resultant MAKEFLAGS definition, even though the command
line switches are active. [1]
MAKEFLAGS puts all single-letter options into the first word, and that
word will be empty if no single-letter options were given. [2]
However, this breaks if MAKEFLAGS=<value> is given on the command line.
The tools/ and tools/% targets set MAKEFLAGS=<value> on the command
line, which breaks the following code in tools/scripts/Makefile.include:
short-opts := $(firstword -$(MAKEFLAGS))
If MAKEFLAGS really needs modification, it should be done through the
environment variable, as follows:
MAKEFLAGS=<value> $(MAKE) ...
That said, I question whether modifying MAKEFLAGS is necessary here.
The only flag we might want to exclude is --no-print-directory, as the
tools build system changes the working directory. However, people might
find the "Entering/Leaving directory" logs annoying.
Linus Torvalds [Sat, 15 Feb 2025 03:56:12 +0000 (19:56 -0800)]
Merge tag 'alpha-fixes-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha
Pull alpha fixes from Matt Turner:
"A few changes for alpha, including some important fixes for kernel
stack alignment"
* tag 'alpha-fixes-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
alpha: Use str_yes_no() helper in pci_dac_dma_supported()
alpha: Replace one-element array with flexible array member
alpha: align stack for page fault and user unaligned trap handlers
alpha: make stack 16-byte aligned (most cases)
alpha: replace hardcoded stack offsets with autogenerated ones
Linus Torvalds [Sat, 15 Feb 2025 00:49:07 +0000 (16:49 -0800)]
Merge tag 'pci-v6.14-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Update a BUILD_BUG_ON() usage that works on current compilers, but
breaks compilation on gcc 5.3.1 (Alex Williamson)
- Avoid use of FLR for Mediatek MT7922 WiFi; the device previously
worked after a long timeout and fallback to SBR, but after a recent
RRS change it doesn't work at all after FLR (Bjorn Helgaas)
* tag 'pci-v6.14-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Avoid FLR for Mediatek MT7922 WiFi
PCI: Fix BUILD_BUG_ON usage for old gcc
Ashish Kalra [Mon, 10 Feb 2025 22:54:18 +0000 (22:54 +0000)]
x86/sev: Fix broken SNP support with KVM module built-in
Fix issues with enabling SNP host support and effectively SNP support
which is broken with respect to the KVM module being built-in.
SNP host support is enabled in snp_rmptable_init() which is invoked as
device_initcall(). SNP check on IOMMU is done during IOMMU PCI init
(IOMMU_PCI_INIT stage). And for that reason snp_rmptable_init() is
currently invoked via device_initcall() and cannot be invoked via
subsys_initcall() as core IOMMU subsystem gets initialized via
subsys_initcall().
Now, if kvm_amd module is built-in, it gets initialized before SNP host
support is enabled in snp_rmptable_init() :
And then svm_x86_ops->enable_virtualization_cpu()
(svm_enable_virtualization_cpu) programs MSR_VM_HSAVE_PA as following:
wrmsrl(MSR_VM_HSAVE_PA, sd->save_area_pa);
So VM_HSAVE_PA is non-zero before SNP support is enabled on all CPUs.
snp_rmptable_init() gets invoked after svm_enable_virtualization_cpu()
as following :
...
[ 11.256138] kvm_amd: in svm_enable_virtualization_cpu
...
[ 11.264918] SEV-SNP: in snp_rmptable_init
This triggers a #GP exception in snp_rmptable_init() when snp_enable()
is invoked to set SNP_EN in SYSCFG MSR:
This #GP exception is getting triggered due to the following errata for
AMD family 19h Models 10h-1Fh Processors:
Processor may generate spurious #GP(0) Exception on WRMSR instruction:
Description:
The Processor will generate a spurious #GP(0) Exception on a WRMSR
instruction if the following conditions are all met:
- the target of the WRMSR is a SYSCFG register.
- the write changes the value of SYSCFG.SNPEn from 0 to 1.
- One of the threads that share the physical core has a non-zero
value in the VM_HSAVE_PA MSR.
The document being referred to above:
https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/revision-guides/57095-PUB_1_01.pdf
To summarize, with kvm_amd module being built-in, KVM/SVM initialization
happens before host SNP is enabled and this SVM initialization
sets VM_HSAVE_PA to non-zero, which then triggers a #GP when
SYSCFG.SNPEn is being set and this will subsequently cause
SNP_INIT(_EX) to fail with INVALID_CONFIG error as SYSCFG[SnpEn] is not
set on all CPUs.
Essentially SNP host enabling code should be invoked before KVM
initialization, which is currently not the case when KVM is built-in.
Add fix to call snp_rmptable_init() early from iommu_snp_enable()
directly and not invoked via device_initcall() which enables SNP host
support before KVM initialization with kvm_amd module built-in.
Add additional handling for `iommu=off` or `amd_iommu=off` options.
Note that IOMMUs need to be enabled for SNP initialization, therefore,
if host SNP support is enabled but late IOMMU initialization fails
then that will cause PSP driver's SNP_INIT to fail as IOMMU SNP sanity
checks in SNP firmware will fail with invalid configuration error as
below:
Sean Christopherson [Mon, 10 Feb 2025 22:54:02 +0000 (22:54 +0000)]
KVM: SVM: Ensure PSP module is initialized if KVM module is built-in
The kernel's initcall infrastructure lacks the ability to express
dependencies between initcalls, whereas the modules infrastructure
automatically handles dependencies via symbol loading. Ensure the
PSP SEV driver is initialized before proceeding in sev_hardware_setup()
if KVM is built-in as the dependency isn't handled by the initcall
infrastructure.
Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-ID: <f78ddb64087df27e7bcb1ae0ab53f55aa0804fab.1739226950.git.ashish.kalra@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Mon, 10 Feb 2025 22:53:47 +0000 (22:53 +0000)]
crypto: ccp: Add external API interface for PSP module initialization
KVM is dependent on the PSP SEV driver and PSP SEV driver needs to be
loaded before KVM module. In case of module loading any dependent
modules are automatically loaded but in case of built-in modules there
is no inherent mechanism available to specify dependencies between
modules and ensure that any dependent modules are loaded implicitly.
Add a new external API interface for PSP module initialization which
allows PSP SEV driver to be loaded explicitly if KVM is built-in.
Signed-off-by: Sean Christopherson <seanjc@google.com> Co-developed-by: Ashish Kalra <ashish.kalra@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-ID: <15279ca0cad56a07cf12834ec544310f85ff5edc.1739226950.git.ashish.kalra@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 14 Feb 2025 23:32:47 +0000 (18:32 -0500)]
Merge tag 'kvmarm-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.14, take #2
- Large set of fixes for vector handling, specially in the interactions
between host and guest state. This fixes a number of bugs affecting
actual deployments, and greatly simplifies the FP/SIMD/SVE handling.
Thanks to Mark Rutland for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours.
- Fix use of kernel VAs at EL2 when emulating timers with nVHE.
Linus Torvalds [Fri, 14 Feb 2025 23:07:11 +0000 (15:07 -0800)]
Merge tag 'thermal-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Fix a regression caused by an inadvertent change of the
THERMAL_GENL_ATTR_CPU_CAPABILITY value in one of the recent thermal
commits (Zhang Rui) and drop a stale piece of documentation (Daniel
Lezcano)"
* tag 'thermal-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/cpufreq_cooling: Remove structure member documentation
thermal/netlink: Prevent userspace segmentation fault by adjusting UAPI header
Linus Torvalds [Fri, 14 Feb 2025 21:56:04 +0000 (13:56 -0800)]
Merge tag 'efi-fixes-for-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"Take the newly introduced EFI_MEMORY_HOT_PLUGGABLE memory attribute
into account when placing the kernel image in memory at boot.
Otherwise, the presence of the kernel image could prevent such a
memory region from being unplugged at runtime if it was 'cold
plugged', i.e., already plugged in at boot time (and exposed via the
EFI memory map).
This should ensure that the new EFI_MEMORY_HOT_PLUGGABLE memory
attribute is used consistently by Linux before it ever turns up in
production, ensuring that we can make meaningful use of it without
running the risk of regressing existing users"
* tag 'efi-fixes-for-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Use BIT_ULL() constants for memory attributes
efi: Avoid cold plugged memory for placing the kernel
Linus Torvalds [Fri, 14 Feb 2025 19:30:53 +0000 (11:30 -0800)]
Merge tag 'io_uring-6.14-20250214' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- fixes for a potential data corruption issue with IORING_OP_URING_CMD,
where not all the SQE data is stable. Will be revisited in the
future, for now it ends up with just always copying it beyond prep to
provide the same guarantees as all other opcodes
- make the waitid opcode setup async data like any other opcodes (no
real fix here, just a consistency thing)
- fix for waitid io_tw_state abuse
- when a buffer group is type is changed, do so by allocating a new
buffer group entry and discard the old one, rather than migrating
* tag 'io_uring-6.14-20250214' of git://git.kernel.dk/linux:
io_uring/uring_cmd: unconditionally copy SQEs at prep time
io_uring/waitid: setup async data in the prep handler
io_uring/uring_cmd: remove dead req_has_async_data() check
io_uring/uring_cmd: switch sqe to async_data on EAGAIN
io_uring/uring_cmd: don't assume io_uring_cmd_data layout
io_uring/kbuf: reallocate buf lists on upgrade
io_uring/waitid: don't abuse io_tw_state
Linus Torvalds [Fri, 14 Feb 2025 19:14:24 +0000 (11:14 -0800)]
Merge tag 'sched_ext-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix lock imbalance in a corner case of dispatch_to_local_dsq()
- Migration disabled tasks were confusing some BPF schedulers and its
handling had a bug. Fix it and simplify the default behavior by
dispatching them automatically
- ops.tick(), ops.disable() and ops.exit_task() were incorrectly
disallowing kfuncs that require the task argument to be the rq
operation is currently operating on and thus is rq-locked.
Allow them.
- Fix autogroup migration handling bug which was occasionally
triggering a warning in the cgroup migration path
- tools/sched_ext, selftest and other misc updates
* tag 'sched_ext-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Use SCX_CALL_OP_TASK in task_tick_scx
sched_ext: Fix the incorrect bpf_list kfunc API in common.bpf.h.
sched_ext: selftests: Fix grammar in tests description
sched_ext: Fix incorrect assumption about migration disabled tasks in task_can_run_on_remote_rq()
sched_ext: Fix migration disabled handling in targeted dispatches
sched_ext: Implement auto local dispatching of migration disabled tasks
sched_ext: Fix incorrect time delta calculation in time_delta()
sched_ext: Fix lock imbalance in dispatch_to_local_dsq()
sched_ext: selftests/dsp_local_on: Fix selftest on UP systems
tools/sched_ext: Add helper to check task migration state
sched_ext: Fix incorrect autogroup migration detection
sched_ext: selftests/dsp_local_on: Fix sporadic failures
selftests/sched_ext: Fix enum resolution
sched_ext: Include task weight in the error state dump
sched_ext: Fixes typos in comments
Ivan Kokshaysky [Tue, 4 Feb 2025 22:35:24 +0000 (23:35 +0100)]
alpha: align stack for page fault and user unaligned trap handlers
do_page_fault() and do_entUna() are special because they use
non-standard stack frame layout. Fix them manually.
Cc: stable@vger.kernel.org Tested-by: Maciej W. Rozycki <macro@orcam.me.uk> Tested-by: Magnus Lindholm <linmag7@gmail.com> Tested-by: Matt Turner <mattst88@gmail.com> Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Ivan Kokshaysky <ink@unseen.parts> Signed-off-by: Matt Turner <mattst88@gmail.com>
Ivan Kokshaysky [Tue, 4 Feb 2025 22:35:23 +0000 (23:35 +0100)]
alpha: make stack 16-byte aligned (most cases)
The problem is that GCC expects 16-byte alignment of the incoming stack
since early 2004, as Maciej found out [1]:
Having actually dug speculatively I can see that the psABI was changed in
GCC 3.5 with commit e5e10fb4a350 ("re PR target/14539 (128-bit long double
improperly aligned)") back in Mar 2004, when the stack pointer alignment
was increased from 8 bytes to 16 bytes, and arch/alpha/kernel/entry.S has
various suspicious stack pointer adjustments, starting with SP_OFF which
is not a whole multiple of 16.
Also, as Magnus noted, "ALPHA Calling Standard" [2] required the same:
D.3.1 Stack Alignment
This standard requires that stacks be octaword aligned at the time a
new procedure is invoked.
However:
- the "normal" kernel stack is always misaligned by 8 bytes, thanks to
the odd number of 64-bit words in 'struct pt_regs', which is the very
first thing pushed onto the kernel thread stack;
- syscall, fault, interrupt etc. handlers may, or may not, receive aligned
stack depending on numerous factors.
Somehow we got away with it until recently, when we ended up with
a stack corruption in kernel/smp.c:smp_call_function_single() due to
its use of 32-byte aligned local data and the compiler doing clever
things allocating it on the stack.
This adds padding between the PAL-saved and kernel-saved registers
so that 'struct pt_regs' have an even number of 64-bit words.
This makes the stack properly aligned for most of the kernel
code, except two handlers which need special threatment.
Note: struct pt_regs doesn't belong in uapi/asm; this should be fixed,
but let's put this off until later.
Ivan Kokshaysky [Tue, 4 Feb 2025 22:35:22 +0000 (23:35 +0100)]
alpha: replace hardcoded stack offsets with autogenerated ones
This allows the assembly in entry.S to automatically keep in sync with
changes in the stack layout (struct pt_regs and struct switch_stack).
Cc: stable@vger.kernel.org Tested-by: Maciej W. Rozycki <macro@orcam.me.uk> Tested-by: Matt Turner <mattst88@gmail.com> Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Ivan Kokshaysky <ink@unseen.parts> Signed-off-by: Matt Turner <mattst88@gmail.com>
Linus Torvalds [Fri, 14 Feb 2025 19:00:42 +0000 (11:00 -0800)]
Merge tag 'cgroup-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix a race window where a newly forked task could escape cgroup.kill
- Remove incorrectly included steal time from cpu.stat::usage_usec
- Minor update in selftest
* tag 'cgroup-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Remove steal time from usage_usec
selftests/cgroup: use bash in test_cpuset_v1_hp.sh
cgroup: fix race between fork and cgroup.kill
projects / nvme.git / log