Paulo Alcantara [Tue, 21 Jan 2025 18:25:36 +0000 (15:25 -0300)]
smb: client: handle lack of EA support in smb2_query_path_info()
If the server doesn't support both EAs and reparse point in a file,
the SMB2_QUERY_INFO request will fail with either
STATUS_NO_EAS_ON_FILE or STATUS_EAS_NOT_SUPPORT in the compound chain,
so ignore it as long as reparse point isn't
IO_REPARSE_TAG_LX_(CHR|BLK), which would require the EAs to know about
major/minor numbers.
Reported-by: Pali Rohár <pali@kernel.org> Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
cifs: Remove duplicate struct reparse_symlink_data and SYMLINK_FLAG_RELATIVE
In file common/smb2pdu.h is defined struct reparse_symlink_data_buffer
which is same as struct reparse_symlink_data and is used in the whole code.
So remove duplicate struct reparse_symlink_data from client/cifspdu.h.
In file common/smb2pdu.h is defined also SYMLINK_FLAG_RELATIVE constant, so
remove duplication from client/cifspdu.h.
Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Pali Rohár [Sat, 28 Dec 2024 20:21:56 +0000 (21:21 +0100)]
cifs: Do not attempt to call CIFSGetSrvInodeNumber() without CAP_INFOLEVEL_PASSTHRU
CIFSGetSrvInodeNumber() uses SMB_QUERY_FILE_INTERNAL_INFO (0x3ee) level
which is SMB PASSTHROUGH level (>= 0x03e8). SMB PASSTHROUGH levels are
supported only when server announce CAP_INFOLEVEL_PASSTHRU.
So add guard in cifs_query_file_info() function which is the only user of
CIFSGetSrvInodeNumber() function and returns -EOPNOTSUPP when server does
not announce CAP_INFOLEVEL_PASSTHRU.
Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Pali Rohár [Fri, 27 Dec 2024 15:04:38 +0000 (16:04 +0100)]
cifs: Do not attempt to call CIFSSMBRenameOpenFile() without CAP_INFOLEVEL_PASSTHRU
CIFSSMBRenameOpenFile() uses SMB_SET_FILE_RENAME_INFORMATION (0x3f2) level
which is SMB PASSTHROUGH level (>= 0x03e8). SMB PASSTHROUGH levels are
supported only when server announce CAP_INFOLEVEL_PASSTHRU.
All usage of CIFSSMBRenameOpenFile() execept the one is already guarded by
checks which prevents calling it against servers without support for
CAP_INFOLEVEL_PASSTHRU.
The remaning usage without guard is in cifs_do_rename() function, so add
missing guard here.
Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Pali Rohár [Wed, 25 Dec 2024 17:04:55 +0000 (18:04 +0100)]
cifs: Remove declaration of dead CIFSSMBQuerySymLink function
Function CIFSSMBQuerySymLink() was renamed to cifs_query_reparse_point() in
commit ed3e0a149b58 ("smb: client: implement ->query_reparse_point() for
SMB1"). Remove its dead declaration from header file too.
Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Pali Rohár [Wed, 25 Dec 2024 14:54:22 +0000 (15:54 +0100)]
cifs: Fix endian types in struct rfc1002_session_packet
All fields in struct rfc1002_session_packet are in big endian. This is
because all NetBIOS packet headers are in big endian as opposite of SMB
structures which are in little endian.
Therefore use __be16 and __be32 types instead of __u16 and __u32 in
struct rfc1002_session_packet.
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Pali Rohár [Thu, 2 Jan 2025 20:38:48 +0000 (21:38 +0100)]
cifs: Use cifs_autodisable_serverino() for disabling CIFS_MOUNT_SERVER_INUM in readdir.c
In all other places is used function cifs_autodisable_serverino() for
disabling CIFS_MOUNT_SERVER_INUM mount flag. So use is also in readir.c
_initiate_cifs_search() function. Benefit of cifs_autodisable_serverino()
is that it also prints dmesg message that server inode numbers are being
disabled.
Fixes: ec06aedd4454 ("cifs: clean up handling when server doesn't consistently support inode numbers") Fixes: f534dc994397 ("cifs: clear server inode number flag while autodisabling") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Steve French [Sun, 19 Jan 2025 07:02:06 +0000 (01:02 -0600)]
smb3: add missing tracepoint for querying wsl EAs
We had tracepoints for the return code for querying WSL EAs
(trace_smb3_query_wsl_ea_compound_err and
trace_smb3_query_wsl_ea_compound_done) but were missing one for
trace_smb3_query_wsl_ea_compound_enter.
Fixes: ea41367b2a60 ("smb: client: introduce SMB2_OP_QUERY_WSL_EA") Signed-off-by: Steve French <stfrench@microsoft.com>
Ruben Devos [Sat, 18 Jan 2025 20:03:30 +0000 (21:03 +0100)]
smb: client: fix order of arguments of tracepoints
The tracepoints based on smb3_inf_compound_*_class have tcon id and
session id swapped around. This results in incorrect output in
`trace-cmd report`.
Fix the order of arguments to resolve this issue. The trace-cmd output
below shows the before and after of the smb3_delete_enter and
smb3_delete_done events as an example. The smb3_cmd_* events show the
correct session and tcon id for reference.
Also fix tracepoint set -> get in the SMB2_OP_GET_REPARSE case.
Paulo Alcantara [Thu, 16 Jan 2025 17:29:03 +0000 (14:29 -0300)]
smb: client: fix oops due to unset link speed
It isn't guaranteed that NETWORK_INTERFACE_INFO::LinkSpeed will always
be set by the server, so the client must handle any values and then
prevent oopses like below from happening:
Fix this by setting cifs_server_iface::speed to a sane value (1Gbps)
by default when link speed is unset.
Cc: Shyam Prasad N <nspmangalore@gmail.com> Cc: Tom Talpey <tom@talpey.com> Fixes: a6d8fb54a515 ("cifs: distribute channels across interfaces based on speed") Reported-by: Frank Sorenson <sorenson@redhat.com> Reported-by: Jay Shin <jaeshin@redhat.com> Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Liang Jie [Sat, 18 Jan 2025 12:35:28 +0000 (20:35 +0800)]
smb: client: correctly handle ErrorContextData as a flexible array
The `smb2_symlink_err_rsp` structure was previously defined with
`ErrorContextData` as a single `__u8` byte. However, the `ErrorContextData`
field is intended to be a variable-length array based on `ErrorDataLength`.
This mismatch leads to incorrect pointer arithmetic and potential memory
access issues when processing error contexts.
Updates the `ErrorContextData` field to be a flexible array
(`__u8 ErrorContextData[]`). Additionally, it modifies the corresponding
casts in the `symlink_data()` function to properly handle the flexible
array, ensuring correct memory calculations and data handling.
These changes improve the robustness of SMB2 symlink error processing.
Signed-off-by: Liang Jie <liangjie@lixiang.com> Suggested-by: Tom Talpey <tom@talpey.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Paulo Alcantara [Mon, 13 Jan 2025 22:00:29 +0000 (19:00 -0300)]
smb: client: don't retry DFS targets on server shutdown
If TCP Server is about to be destroyed (e.g. CifsExiting was set) and
it is reconnecting, stop retrying DFS targets from cached DFS referral
as this would potentially delay server shutdown in several seconds.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Paulo Alcantara [Fri, 10 Jan 2025 19:45:44 +0000 (16:45 -0300)]
smb: client: fix return value of parse_dfs_referrals()
Return -ENOENT in parse_dfs_referrals() when server returns no targets
for a referral request as specified in
MS-DFSC 3.1.5.4.3 Receiving a Root Referral Response or Link
Referral Response:
> If the referral request is successful, but the NumberOfReferrals
> field in the referral header (as specified in section 2.2.4) is
> 0, the DFS server could not find suitable targets to return to
> the client. In this case, the client MUST fail the original I/O
> operation with STATUS_OBJECT_PATH_NOT_FOUND.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Paulo Alcantara [Fri, 10 Jan 2025 18:58:08 +0000 (15:58 -0300)]
smb: client: optimize referral walk on failed link targets
If a link referral request sent to root server was successful but
client failed to connect to all link targets, there is no need to
retry same link referral on a different root server. Set an end
marker for the DFS root referral so the client will not attempt to
re-send link referrals to different root servers on failures.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Paulo Alcantara [Tue, 7 Jan 2025 15:22:50 +0000 (12:22 -0300)]
smb: client: provide dns_resolve_{unc,name} helpers
Some places pass hostnames rather than UNC paths to resolve them to ip
addresses, so provide helpers to handle both cases and then stop
converting hostnames to UNC paths by inserting path delimiters into
them. Also kill @expiry parameter as it's not used anywhere.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Paulo Alcantara [Fri, 3 Jan 2025 19:58:12 +0000 (16:58 -0300)]
smb: client: fix DFS mount against old servers with NTLMSSP
Old Windows servers will return not fully qualified DFS targets by
default as specified in
MS-DFSC 3.2.5.5 Receiving a Root Referral Request or Link Referral
Request
| Servers SHOULD<30> return fully qualified DNS host names of
| targets in responses to root referral requests and link referral
| requests.
| ...
| <30> Section 3.2.5.5: By default, Windows Server 2003, Windows
| Server 2008, Windows Server 2008 R2, Windows Server 2012, and
| Windows Server 2012 R2 return DNS host names that are not fully
| qualified for targets.
Fix this by converting all NetBIOS host names from DFS targets to
FQDNs and try resolving them first if DNS domain name was provided in
NTLMSSP CHALLENGE_MESSAGE message from previous SMB2_SESSION_SETUP.
This also prevents the client from translating the DFS target
hostnames to another domain depending on the network domain search
order.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Paulo Alcantara [Fri, 3 Jan 2025 19:52:25 +0000 (16:52 -0300)]
smb: client: parse av pair type 4 in CHALLENGE_MESSAGE
Parse FQDN of the domain in CHALLENGE_MESSAGE message as it's gonna be
useful when mounting DFS shares against old Windows Servers (2012 R2
or earlier) that return not fully qualified hostnames for DFS targets
by default.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Linus Torvalds [Sun, 19 Jan 2025 17:33:40 +0000 (09:33 -0800)]
Merge tag 'x86_urgent_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Mark serialize() noinstr so that it can be used from instrumentation-
free code
- Make sure FRED's RSP0 MSR is synchronized with its corresponding
per-CPU value in order to avoid double faults in hotplug scenarios
- Disable EXECMEM_ROX on x86 for now because it didn't receive proper
x86 maintainers review, went in and broke a bunch of things
* tag 'x86_urgent_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Make serialize() always_inline
x86/fred: Fix the FRED RSP0 MSR out of sync with its per-CPU cache
x86: Disable EXECMEM_ROX support
Linus Torvalds [Sun, 19 Jan 2025 17:09:07 +0000 (09:09 -0800)]
Merge tag 'timers_urgent_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Borislav Petkov:
- Reset hrtimers correctly when a CPU hotplug state traversal happens
"half-ways" and leaves hrtimers not (re-)initialized properly
- Annotate accesses to a timer group's ignore flag to prevent KCSAN
from raising data_race warnings
- Make sure timer group initialization is visible to timer tree walkers
and avoid a hypothetical race
- Fix another race between CPU hotplug and idle entry/exit where timers
on a fully idle system are getting ignored
- Fix a case where an ignored signal is still being handled which it
shouldn't be
* tag 'timers_urgent_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimers: Handle CPU state correctly on hotplug
timers/migration: Annotate accesses to ignore flag
timers/migration: Enforce group initialization visibility to tree walkers
timers/migration: Fix another race between hotplug and idle entry/exit
signal/posixtimers: Handle ignore/blocked sequences correctly
Linus Torvalds [Sun, 19 Jan 2025 17:04:33 +0000 (09:04 -0800)]
Merge tag 'irq_urgent_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix an OF node leak in irqchip init's error handling path
- Fix sunxi systems to wake up from suspend with an NMI by
pressing the power button
- Do not spuriously enable interrupts in gic-v3 in a nested
interrupts-off section
- Make sure gic-v3 handles properly a failure to enter a
low power state
* tag 'irq_urgent_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: Plug a OF node reference leak in platform_irqchip_probe()
irqchip/sunxi-nmi: Add missing SKIP_WAKE flag
irqchip/gic-v3-its: Don't enable interrupts in its_irq_set_vcpu_affinity()
irqchip/gic-v3: Handle CPU_PM_ENTER_FAILED correctly
Linus Torvalds [Sun, 19 Jan 2025 17:01:17 +0000 (09:01 -0800)]
Merge tag 'sched_urgent_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Do not adjust the weight of empty group entities and avoid
scheduling artifacts
- Avoid scheduling lag by computing lag properly and thus address
an EEVDF entity placement issue
* tag 'sched_urgent_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix update_cfs_group() vs DELAY_DEQUEUE
sched/fair: Fix EEVDF entity placement bug causing scheduling lag
Linus Torvalds [Sat, 18 Jan 2025 21:22:53 +0000 (13:22 -0800)]
Merge tag 'trace-v6.13-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix regression in GFP output in trace events
It was reported that the GFP flags in trace events went from human
readable to just their hex values:
gfp_flags=GFP_HIGHUSER_MOVABLE|__GFP_COMP to gfp_flags=0x140cca
This was caused by a change that added the use of enums in calculating
the GFP flags.
As defines get translated into their values in the trace event format
files, the user space tooling could easily convert the GFP flags into
their symbols via the __print_flags() helper macro.
The problem is that enums do not get converted, and the names of the
enums show up in the format files and user space tooling cannot
translate them.
Add TRACE_DEFINE_ENUM() around the enums used for GFP flags which is
the tracing infrastructure macro that informs the tracing subsystem
what the values for enums and it can then expose that to user space"
* tag 'trace-v6.13-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: gfp: Fix the GFP enum values shown for user space tracing tools
Linus Torvalds [Fri, 17 Jan 2025 23:01:24 +0000 (15:01 -0800)]
Merge tag 'devicetree-fixes-for-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
"Another fix and testcase to avoid the newly added WARN in the case of
non-translatable addresses"
* tag 'devicetree-fixes-for-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of/address: Fix WARN when attempting translating non-translatable addresses
of/unittest: Add test that of_address_to_resource() fails on non-translatable address
Linus Torvalds [Fri, 17 Jan 2025 22:49:53 +0000 (14:49 -0800)]
Merge tag 'soc-fixes-6.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Two last minute fixes: one build issue on TI soc drivers, and a
regression in the renesas reset controller driver"
* tag 'soc-fixes-6.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: ti: pruss: Fix pruss APIs
reset: rzg2l-usbphy-ctrl: Assign proper of node to the allocated device
Linus Torvalds [Fri, 17 Jan 2025 22:22:36 +0000 (14:22 -0800)]
Merge tag 'mtd/fixes-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd revert from Miquel Raynal:
"Very late this cycle we identified a breakage that could potentially
hit several spi controller drivers because of a change in the way the
dummy cycles validity is checked.
We do not know at the moment how to handle the situation properly, so
we prefer to revert the faulty patch for the next release"
* tag 'mtd/fixes-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
Revert "mtd: spi-nor: core: replace dummy buswidth from addr to data"
Steven Rostedt [Thu, 16 Jan 2025 21:41:24 +0000 (16:41 -0500)]
tracing: gfp: Fix the GFP enum values shown for user space tracing tools
Tracing tools like perf and trace-cmd read the /sys/kernel/tracing/events/*/*/format
files to know how to parse the data and also how to print it. For the
"print fmt" portion of that file, if anything uses an enum that is not
exported to the tracing system, user space will not be able to parse it.
The GFP flags use to be defines, and defines get translated in the print
fmt sections. But now they are converted to use enums, which is not.
Where the enums names like ___GFP_KSWAPD_RECLAIM_BIT are shown and not their
values. User space has no way to convert these names to their values and
the output will fail to parse. What is shown is now:
The TRACE_DEFINE_ENUM() macro was created to handle enums in the print fmt
files. This causes them to be replaced at boot up with the numbers, so
that user space tooling can parse it. By using this macro, the output is
back to the human readable:
Linus Torvalds [Fri, 17 Jan 2025 20:31:37 +0000 (12:31 -0800)]
Merge tag 'hwmon-for-v6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- ltc2991, tmp513: Fix problems seen when dividing negative numbers
- drivetemp: Handle large timeouts observed on some drives
- acpi_power_meter: Fix loading the driver on platforms without _PMD
method
* tag 'hwmon-for-v6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (ltc2991) Fix mixed signed/unsigned in DIV_ROUND_CLOSEST
hwmon: (drivetemp) Set scsi command timeout to 10s
hwmon: (acpi_power_meter) Fix a check for the return value of read_domain_devices().
hwmon: (tmp513) Fix division of negative numbers
Linus Torvalds [Fri, 17 Jan 2025 05:24:34 +0000 (21:24 -0800)]
Merge tag 'mm-hotfixes-stable-2025-01-16-21-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"7 singleton hotfixes. 6 are MM.
Two are cc:stable and the remainder address post-6.12 issues"
* tag 'mm-hotfixes-stable-2025-01-16-21-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
ocfs2: check dir i_size in ocfs2_find_entry
mailmap: update entry for Ethan Carter Edwards
mm: zswap: move allocations during CPU init outside the lock
mm: khugepaged: fix call hpage_collapse_scan_file() for anonymous vma
mm: shmem: use signed int for version handling in casefold option
alloc_tag: skip pgalloc_tag_swap if profiling is disabled
mm: page_alloc: fix missed updates of lowmem_reserve in adjust_managed_page_count
Linus Torvalds [Fri, 17 Jan 2025 05:18:12 +0000 (21:18 -0800)]
Merge tag '6.13-rc7-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- fix double free when reconnect racing with closing session
- fix SMB1 reconnect with password rotation
* tag '6.13-rc7-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix double free of TCP_Server_Info::hostname
cifs: support reconnect with alternate password for SMB1
Linus Torvalds [Fri, 17 Jan 2025 03:49:26 +0000 (19:49 -0800)]
Merge tag 'drm-fixes-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Final(?) set of fixes for 6.13, I think the holidays finally caught up
with everyone, the misc changes are 2 weeks worth, otherwise amdgpu
and xe are most of it. The largest pieces is a new test so I'm not too
worried about that.
kunit:
- Fix W=1 build for kunit tests
bridge:
- Handle YCbCr420 better in bridge code, with tests
- itee-it6263 error handling fix
xe:
- Add steering info support for GuC register lists
- Add means to wait for reset and synchronous reset
- Make changing ccs_mode a synchronous action
- Add missing mux registers
- Mark ComputeCS read mode as UC on iGPU, unblocking ULLS on iGPU
i915:
- Relax clear color alignment to 64 bytes [fb]
v3d:
- Fix warn when unloading v3d
nouveau:
- Fix cross-device fence handling in nouveau
- Fix backlight regression for macbooks 5,1
vmwgfx:
- Fix BO reservation handling in vmwgfx"
* tag 'drm-fixes-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel: (33 commits)
drm/xe: Mark ComputeCS read mode as UC on iGPU
drm/xe/oa: Add missing VISACTL mux registers
drm/xe: make change ccs_mode a synchronous action
drm/xe: introduce xe_gt_reset and xe_gt_wait_for_reset
drm/xe/guc: Adding steering info support for GuC register lists
drm/bridge: ite-it6263: Prevent error pointer dereference in probe()
drm/v3d: Ensure job pointer is set to NULL after job completion
drm/vmwgfx: Add new keep_resv BO param
drm/vmwgfx: Remove busy_places
drm/vmwgfx: Unreserve BO on error
drm/amdgpu: fix fw attestation for MP0_14_0_{2/3}
drm/amdgpu: always sync the GFX pipe on ctx switch
drm/amdgpu: disable gfxoff with the compute workload on gfx12
drm/amdgpu: Fix Circular Locking Dependency in AMDGPU GFX Isolation
drm/i915/fb: Relax clear color alignment to 64 bytes
drm/amd/display: Disable replay and psr while VRR is enabled
drm/amd/display: Fix PSR-SU not support but still call the amdgpu_dm_psr_enable
nouveau/fence: handle cross device fences properly
drm/tests: connector: Add ycbcr_420_allowed tests
drm/connector: hdmi: Validate supported_formats matches ycbcr_420_allowed
...
Linus Torvalds [Fri, 17 Jan 2025 01:02:28 +0000 (17:02 -0800)]
Merge tag 'io_uring-6.13-20250116' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"One fix for the error handling in buffer cloning, and one fix for the
ring resizing.
Two minor followups for the latter as well.
Both of these issues only affect 6.13, so not marked for stable"
* tag 'io_uring-6.13-20250116' of git://git.kernel.dk/linux:
io_uring/register: cache old SQ/CQ head reading for copies
io_uring/register: document io_register_resize_rings() shared mem usage
io_uring/register: use stable SQ/CQ ring data during resize
io_uring/rsrc: fixup io_clone_buffers() error handling
Dave Airlie [Thu, 16 Jan 2025 22:54:06 +0000 (08:54 +1000)]
Merge tag 'drm-xe-fixes-2025-01-16' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Add steering info support for GuC register lists (Jesus Narvaez)
- Add means to wait for reset and synchronous reset (Maciej)
- Make changing ccs_mode a synchronous action (Maciej)
- Add missing mux registers (Ashutosh)
- Mark ComputeCS read mode as UC on iGPU, unblocking ULLS on iGPU (Matt Brost)
Linus Torvalds [Fri, 17 Jan 2025 00:19:05 +0000 (16:19 -0800)]
Merge tag 'trace-v6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix a regression in the irqsoff and wakeup latency tracing
The function graph tracer infrastructure has become generic so that
fprobes and BPF can be based on it. As it use to only handle function
graph tracing, it would always calculate the time the function
entered so that it could then calculate the time it exits and give
the length of time the function executed for. But this is not needed
for the other users (fprobes and BPF) and reading the clock adds a
non-negligible overhead, so the calculation was moved into the
function graph tracer logic.
But the irqsoff and wakeup latency tracers, when the "display-graph"
option was set, would use the function graph tracer to calculate the
times of functions during the latency. The movement of the calltime
calculation made the value zero for these tracers, and the output no
longer showed the length of time of each tracer, but instead the
absolute timestamp of when the function returned (rettime - calltime
where calltime is now zero).
Have the irqsoff and wakeup latency tracers also do the calltime
calculation as the function graph tracer does and report the proper
length of the function timings.
- Update the tracing display to reflect the new preempt lazy model
When the system is configured with preempt lazy, the output of the
trace data would state "unknown" for the current preemption model.
Because the lazy preemption model was just added, make it known to
the tracing subsystem too. This is just a one line change.
- Document multiple function graph having slightly different timings
Now that function graph tracer infrastructure is separate, this also
allows the function graph tracer to run in multiple instances (it
wasn't able to do so before). If two instances ran the function graph
tracer and traced the same functions, the timings for them will be
slightly different because each does their own timings and collects
the timestamps differently. Document this to not have people be
confused by it.
* tag 'trace-v6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Document that multiple function_graph tracing may have different times
tracing: Print lazy preemption model
tracing: Fix irqsoff and wakeup latency tracers when using function graph
Matthew Brost [Tue, 14 Jan 2025 00:25:07 +0000 (16:25 -0800)]
drm/xe: Mark ComputeCS read mode as UC on iGPU
RING_CMD_CCTL read index should be UC on iGPU parts due to L3 caching
structure. Having this as WB blocks ULLS from being enabled. Change to
UC to unblock ULLS on iGPU.
v2:
- Drop internal communications commnet, bspec is updated
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Cc: Michal Mrozek <michal.mrozek@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: stable@vger.kernel.org Fixes: 328e089bfb37 ("drm/xe: Leverage ComputeCS read L3 caching") Signed-off-by: Matthew Brost <matthew.brost@intel.com> Acked-by: Michal Mrozek <michal.mrozek@intel.com> Reviewed-by: Stuart Summers <stuart.summers@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250114002507.114087-1-matthew.brost@intel.com
(cherry picked from commit 758debf35b9cda5450e40996991a6e4b222899bd) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
* tag 'net-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
netdev: avoid CFI problems with sock priv helpers
net/mlx5e: Always start IPsec sequence number from 1
net/mlx5e: Rely on reqid in IPsec tunnel mode
net/mlx5e: Fix inversion dependency warning while enabling IPsec tunnel
net/mlx5: Clear port select structure when fail to create
net/mlx5: SF, Fix add port error handling
net/mlx5: Fix a lockdep warning as part of the write combining test
net/mlx5: Fix RDMA TX steering prio
net: make page_pool_ref_netmem work with net iovs
net: ethernet: xgbe: re-add aneg to supported features in PHY quirks
net: pcs: xpcs: actively unset DW_VR_MII_DIG_CTRL1_2G5_EN for 1G SGMII
net: pcs: xpcs: fix DW_VR_MII_DIG_CTRL1_2G5_EN bit being set for 1G SGMII w/o inband
selftests: net: Adapt ethtool mq tests to fix in qdisc graft
net: fec: handle page_pool_dev_alloc_pages error
net: netpoll: ensure skb_pool list is always initialized
net: xilinx: axienet: Fix IRQ coalescing packet count overflow
nfp: bpf: prevent integer overflow in nfp_bpf_event_output()
selftests: mptcp: avoid spurious errors on disconnect
mptcp: fix spurious wake-up on under memory pressure
mptcp: be sure to send ack when mptcp-level window re-opens
...
Linus Torvalds [Thu, 16 Jan 2025 17:04:10 +0000 (09:04 -0800)]
Merge tag 'pm-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Update the documentation of cpuidle governors that does not match the
code any more after previous functional changes (Rafael Wysocki) and
fix up the cpufreq Kconfig file broken inadvertently by a previous
update (Viresh Kumar)"
* tag 'pm-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Move endif to the end of Kconfig file
cpuidle: teo: Update documentation after previous changes
cpuidle: menu: Update documentation after previous changes
Linus Torvalds [Thu, 16 Jan 2025 17:02:10 +0000 (09:02 -0800)]
Merge tag 'acpi-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Prevent acpi_video_device_EDID() from returning a pointer to a memory
region that should not be passed to kfree() which causes one of its
users to crash randomly on attempts to free it (Chris Bainbridge)"
* tag 'acpi-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: video: Fix random crashes due to bad kfree()
Linus Torvalds [Thu, 16 Jan 2025 16:54:33 +0000 (08:54 -0800)]
Merge tag 'for-6.13-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
- handle d_path() errors when canonicalizing device mapper paths during
device scan
* tag 'for-6.13-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: add the missing error handling inside get_canonical_dev_path
Juergen Gross [Wed, 18 Dec 2024 10:09:18 +0000 (11:09 +0100)]
x86/asm: Make serialize() always_inline
In order to allow serialize() to be used from noinstr code, make it
__always_inline.
Fixes: 0ef8047b737d ("x86/static-call: provide a way to do very early static-call updates") Closes: https://lore.kernel.org/oe-kbuild-all/202412181756.aJvzih2K-lkp@intel.com/ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20241218100918.22167-1-jgross@suse.com
Jakub Kicinski [Wed, 15 Jan 2025 16:14:36 +0000 (08:14 -0800)]
netdev: avoid CFI problems with sock priv helpers
Li Li reports that casting away callback type may cause issues
for CFI. Let's generate a small wrapper for each callback,
to make sure compiler sees the anticipated types.
Koichiro Den [Fri, 20 Dec 2024 13:44:21 +0000 (22:44 +0900)]
hrtimers: Handle CPU state correctly on hotplug
Consider a scenario where a CPU transitions from CPUHP_ONLINE to halfway
through a CPU hotunplug down to CPUHP_HRTIMERS_PREPARE, and then back to
CPUHP_ONLINE:
Since hrtimers_prepare_cpu() does not run, cpu_base.hres_active remains set
to 1 throughout. However, during a CPU unplug operation, the tick and the
clockevents are shut down at CPUHP_AP_TICK_DYING. On return to the online
state, for instance CFS incorrectly assumes that the hrtick is already
active, and the chance of the clockevent device to transition to oneshot
mode is also lost forever for the CPU, unless it goes back to a lower state
than CPUHP_HRTIMERS_PREPARE once.
This round-trip reveals another issue; cpu_base.online is not set to 1
after the transition, which appears as a WARN_ON_ONCE in enqueue_hrtimer().
Aside of that, the bulk of the per CPU state is not reset either, which
means there are dangling pointers in the worst case.
Address this by adding a corresponding startup() callback, which resets the
stale per CPU state and sets the online flag.
[ tglx: Make the new callback unconditionally available, remove the online
modification in the prepare() callback and clear the remaining
state in the starting callback instead of the prepare callback ]
Frederic Weisbecker [Tue, 14 Jan 2025 23:15:06 +0000 (00:15 +0100)]
timers/migration: Annotate accesses to ignore flag
The group's ignore flag is:
_ read under the group's lock (idle entry, remote expiry)
_ turned on/off under the group's lock (idle entry, remote expiry)
_ turned on locklessly on idle exit
When idle entry or remote expiry clear the "ignore" flag of a group, the
operation must be synchronized against other concurrent idle entry or
remote expiry to make sure the related group timer is never missed. To
enforce this synchronization, both "ignore" clear and read are
performed under the group lock.
On the contrary, whether idle entry or remote expiry manage to observe
the "ignore" flag turned on by a CPU exiting idle is a matter of
optimization. If that flag set is missed or cleared concurrently, the
worst outcome is a migrator wasting time remotely handling a "ghost"
timer. This is why the ignore flag can be set locklessly.
Unfortunately, the related lockless accesses are bare and miss
appropriate annotations. KCSAN rightfully complains:
BUG: KCSAN: data-race in __tmigr_cpu_activate / print_report
write to 0xffff88842fc28004 of 1 bytes by task 0 on cpu 0:
__tmigr_cpu_activate
tmigr_cpu_activate
timer_clear_idle
tick_nohz_restart_sched_tick
tick_nohz_idle_exit
do_idle
cpu_startup_entry
kernel_init
do_initcalls
clear_bss
reserve_bios_regions
common_startup_64
read to 0xffff88842fc28004 of 1 bytes by task 0 on cpu 1:
print_report
kcsan_report_known_origin
kcsan_setup_watchpoint
tmigr_next_groupevt
tmigr_update_events
tmigr_inactive_up
__walk_groups+0x50/0x77
walk_groups
__tmigr_cpu_deactivate
tmigr_cpu_deactivate
__get_next_timer_interrupt
timer_base_try_to_set_idle
tick_nohz_stop_tick
tick_nohz_idle_stop_tick
cpuidle_idle_call
do_idle
Although the relevant accesses could be marked as data_race(), the
"ignore" flag being read several times within the same
tmigr_update_events() function is confusing and error prone. Prefer
reading it once in that function and make use of similar/paired accesses
elsewhere with appropriate comments when necessary.
Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250114231507.21672-4-frederic@kernel.org Closes: https://lore.kernel.org/oe-lkp/202501031612.62e0c498-lkp@intel.com
Frederic Weisbecker [Tue, 14 Jan 2025 23:15:05 +0000 (00:15 +0100)]
timers/migration: Enforce group initialization visibility to tree walkers
Commit 2522c84db513 ("timers/migration: Fix another race between hotplug
and idle entry/exit") fixed yet another race between idle exit and CPU
hotplug up leading to a wrong "0" value migrator assigned to the top
level. However there is yet another situation that remains unhandled:
[GRP0:0]
migrator = CPU 0
active = CPU 0
groupmask = 1
/ \ \
0 1 2..7
active idle idle
1) CPU 0 is activating. It has done the cmpxchg on the top's ->migr_state
but it hasn't yet returned to __walk_groups().
[GRP0:0]
migrator = CPU 0
active = CPU 0, CPU 1
groupmask = 1
/ \ \
0 1 2..7
active active idle
2) CPU 1 is activating. CPU 0 stays the migrator (still stuck in
__walk_groups(), delayed by #VMEXIT for example).
[GRP1:0]
migrator = TMIGR_NONE
active = NONE
groupmask = 1
/ \
[GRP0:0] [GRP0:1]
migrator = CPU 0 migrator = TMIGR_NONE
active = CPU 0, CPU1 active = NONE
groupmask = 1 groupmask = 2
/ \ \
0 1 2..7 8
active active idle !online
3) CPU 8 is preparing to boot. CPUHP_TMIGR_PREPARE is being ran by CPU 1
which has created the GRP0:1 and the new top GRP1:0 connected to GRP0:1
and GRP0:0. CPU 1 hasn't yet propagated its activation up to GRP1:0.
[GRP1:0]
migrator = GRP0:0
active = GRP0:0
groupmask = 1
/ \
[GRP0:0] [GRP0:1]
migrator = CPU 0 migrator = TMIGR_NONE
active = CPU 0, CPU1 active = NONE
groupmask = 1 groupmask = 2
/ \ \
0 1 2..7 8
active active idle !online
4) CPU 0 finally resumed after its #VMEXIT. It's in __walk_groups()
returning from tmigr_cpu_active(). The new top GRP1:0 is visible and
fetched and the pre-initialized groupmask of GRP0:0 is also visible.
As a result tmigr_active_up() is called to GRP1:0 with GRP0:0 as active
and migrator. CPU 0 is returning to __walk_groups() but suffers again
a #VMEXIT.
[GRP1:0]
migrator = GRP0:0
active = GRP0:0
groupmask = 1
/ \
[GRP0:0] [GRP0:1]
migrator = CPU 0 migrator = TMIGR_NONE
active = CPU 0, CPU1 active = NONE
groupmask = 1 groupmask = 2
/ \ \
0 1 2..7 8
active active idle !online
5) CPU 1 propagates its activation of GRP0:0 to GRP1:0. This has no
effect since CPU 0 did it already.
[GRP1:0]
migrator = GRP0:0
active = GRP0:0, GRP0:1
groupmask = 1
/ \
[GRP0:0] [GRP0:1]
migrator = CPU 0 migrator = CPU 8
active = CPU 0, CPU1 active = CPU 8
groupmask = 1 groupmask = 2
/ \ \ \
0 1 2..7 8
active active idle active
6) CPU 1 links CPU 8 to its group. CPU 8 boots and goes through
CPUHP_AP_TMIGR_ONLINE which propagates activation.
[GRP2:0]
migrator = TMIGR_NONE
active = NONE
groupmask = 1
/ \
[GRP1:0] [GRP1:1]
migrator = GRP0:0 migrator = TMIGR_NONE
active = GRP0:0, GRP0:1 active = NONE
groupmask = 1 groupmask = 2
/ \
[GRP0:0] [GRP0:1] [GRP0:2]
migrator = CPU 0 migrator = CPU 8 migrator = TMIGR_NONE
active = CPU 0, CPU1 active = CPU 8 active = NONE
groupmask = 1 groupmask = 2 groupmask = 0
/ \ \ \
0 1 2..7 8 64
active active idle active !online
7) CPU 64 is booting. CPUHP_TMIGR_PREPARE is being ran by CPU 1
which has created the GRP1:1, GRP0:2 and the new top GRP2:0 connected to
GRP1:1 and GRP1:0. CPU 1 hasn't yet propagated its activation up to
GRP2:0.
[GRP2:0]
migrator = 0 (!!!)
active = NONE
groupmask = 1
/ \
[GRP1:0] [GRP1:1]
migrator = GRP0:0 migrator = TMIGR_NONE
active = GRP0:0, GRP0:1 active = NONE
groupmask = 1 groupmask = 2
/ \
[GRP0:0] [GRP0:1] [GRP0:2]
migrator = CPU 0 migrator = CPU 8 migrator = TMIGR_NONE
active = CPU 0, CPU1 active = CPU 8 active = NONE
groupmask = 1 groupmask = 2 groupmask = 0
/ \ \ \
0 1 2..7 8 64
active active idle active !online
8) CPU 0 finally resumed after its #VMEXIT. It's in __walk_groups()
returning from tmigr_cpu_active(). The new top GRP2:0 is visible and
fetched but the pre-initialized groupmask of GRP1:0 is not because no
ordering made its initialization visible. As a result tmigr_active_up()
may be called to GRP2:0 with a "0" child's groumask. Leaving the timers
ignored for ever when the system is fully idle.
The race is highly theoretical and perhaps impossible in practice but
the groupmask of the child is not the only concern here as the whole
initialization of the child is not guaranteed to be visible to any
tree walker racing against hotplug (idle entry/exit, remote handling,
etc...). Although the current code layout seem to be resilient to such
hazards, this doesn't tell much about the future.
Fix this with enforcing address dependency between group initialization
and the write/read to the group's parent's pointer. Fortunately that
doesn't involve any barrier addition in the fast paths.
Frederic Weisbecker [Tue, 14 Jan 2025 23:15:04 +0000 (00:15 +0100)]
timers/migration: Fix another race between hotplug and idle entry/exit
Commit 10a0e6f3d3db ("timers/migration: Move hierarchy setup into
cpuhotplug prepare callback") fixed a race between idle exit and CPU
hotplug up leading to a wrong "0" value migrator assigned to the top
level. However there is still a situation that remains unhandled:
[GRP0:0]
migrator = CPU 0
active = CPU 0
groupmask = 0
/ \ \
0 1 2..7
active idle idle
1) CPU 0 is activating. It has done the cmpxchg on the top's ->migr_state
but it hasn't yet returned to __walk_groups().
[GRP0:0]
migrator = CPU 0
active = CPU 0, CPU 1
groupmask = 0
/ \ \
0 1 2..7
active active idle
2) CPU 1 is activating. CPU 0 stays the migrator (still stuck in
__walk_groups(), delayed by #VMEXIT for example).
[GRP1:0]
migrator = TMIGR_NONE
active = NONE
groupmask = 0
/ \
[GRP0:0] [GRP0:1]
migrator = CPU 0 migrator = TMIGR_NONE
active = CPU 0, CPU1 active = NONE
groupmask = 2 groupmask = 1
/ \ \
0 1 2..7 8
active active idle !online
3) CPU 8 is preparing to boot. CPUHP_TMIGR_PREPARE is being ran by CPU 1
which has created the GRP0:1 and the new top GRP1:0 connected to GRP0:1
and GRP0:0. The groupmask of GRP0:0 is now 2. CPU 1 hasn't yet
propagated its activation up to GRP1:0.
[GRP1:0]
migrator = 0 (!!!)
active = NONE
groupmask = 0
/ \
[GRP0:0] [GRP0:1]
migrator = CPU 0 migrator = TMIGR_NONE
active = CPU 0, CPU1 active = NONE
groupmask = 2 groupmask = 1
/ \ \
0 1 2..7 8
active active idle !online
4) CPU 0 finally resumed after its #VMEXIT. It's in __walk_groups()
returning from tmigr_cpu_active(). The new top GRP1:0 is visible and
fetched but the freshly updated groupmask of GRP0:0 may not be visible
due to lack of ordering! As a result tmigr_active_up() is called to
GRP0:0 with a child's groupmask of "0". This buggy "0" groupmask then
becomes the migrator for GRP1:0 forever. As a result, timers on a fully
idle system get ignored.
One possible fix would be to define TMIGR_NONE as "0" so that such a
race would have no effect. And after all TMIGR_NONE doesn't need to be
anything else. However this would leave an uncomfortable state machine
where gears happen not to break by chance but are vulnerable to future
modifications.
Keep TMIGR_NONE as is instead and pre-initialize to "1" the groupmask of
any newly created top level. This groupmask is guaranteed to be visible
upon fetching the corresponding group for the 1st time:
_ By the upcoming CPU thanks to CPU hotplug synchronization between the
control CPU (BP) and the booting one (AP).
_ By the control CPU since the groupmask and parent pointers are
initialized locally.
_ By all CPUs belonging to the same group than the control CPU because
they must wait for it to ever become idle before needing to walk to
the new top. The cmpcxhg() on ->migr_state then makes sure its
groupmask is visible.
With this pre-initialization, it is guaranteed that if a future top level
is linked to an old one, it is walked through with a valid groupmask.
Leon Romanovsky [Wed, 15 Jan 2025 11:39:10 +0000 (13:39 +0200)]
net/mlx5e: Always start IPsec sequence number from 1
According to RFC4303, section "3.3.3. Sequence Number Generation",
the first packet sent using a given SA will contain a sequence
number of 1.
This is applicable to both ESN and non-ESN mode, which was not covered
in commit mentioned in Fixes line.
Fixes: 3d42c8cc67a8 ("net/mlx5e: Ensure that IPsec sequence packet number starts from 1") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Leon Romanovsky [Wed, 15 Jan 2025 11:39:09 +0000 (13:39 +0200)]
net/mlx5e: Rely on reqid in IPsec tunnel mode
All packet offloads SAs have reqid in it to make sure they have
corresponding policy. While it is not strictly needed for transparent
mode, it is extremely important in tunnel mode. In that mode, policy and
SAs have different match criteria.
Policy catches the whole subnet addresses, and SA catches the tunnel gateways
addresses. The source address of such tunnel is not known during egress packet
traversal in flow steering as it is added only after successful encryption.
As reqid is required for packet offload and it is unique for every SA,
we can safely rely on it only.
The output below shows the configured egress policy and SA by strongswan:
[leonro@vm ~]$ sudo ip x s
src 192.169.101.2 dst 192.169.101.1
proto esp spi 0xc88b7652 reqid 1 mode tunnel
replay-window 0 flag af-unspec esn
aead rfc4106(gcm(aes)) 0xe406a01083986e14d116488549094710e9c57bc6 128
anti-replay esn context:
seq-hi 0x0, seq 0x0, oseq-hi 0x0, oseq 0x0
replay_window 1, bitmap-length 1 00000000
crypto offload parameters: dev eth2 dir out mode packet
[leonro@064 ~]$ sudo ip x p
src 192.170.0.0/16 dst 192.170.0.0/16
dir out priority 383615 ptype main
tmpl src 192.169.101.2 dst 192.169.101.1
proto esp spi 0xc88b7652 reqid 1 mode tunnel
crypto offload parameters: dev eth2 mode packet
Fixes: b3beba1fb404 ("net/mlx5e: Allow policies with reqid 0, to support IKE policy holes") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Leon Romanovsky [Wed, 15 Jan 2025 11:39:08 +0000 (13:39 +0200)]
net/mlx5e: Fix inversion dependency warning while enabling IPsec tunnel
Attempt to enable IPsec packet offload in tunnel mode in debug kernel
generates the following kernel panic, which is happening due to two
issues:
1. In SA add section, the should be _bh() variant when marking SA mode.
2. There is not needed flush_workqueue in SA delete routine. It is not
needed as at this stage as it is removed from SADB and the running work
will be canceled later in SA free.
=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
6.12.0+ #4 Not tainted
-----------------------------------------------------
charon/1337 [HC0[0]:SC0[4]:HE1:SE0] is trying to acquire: ffff88810f365020 (&xa->xa_lock#24){+.+.}-{3:3}, at: mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core]
and this task is already holding: ffff88813e0f0d48 (&x->lock){+.-.}-{3:3}, at: xfrm_state_delete+0x16/0x30
which would create a new lock dependency:
(&x->lock){+.-.}-{3:3} -> (&xa->xa_lock#24){+.+.}-{3:3}
but this new dependency connects a SOFTIRQ-irq-safe lock:
(&x->lock){+.-.}-{3:3}
... which became SOFTIRQ-irq-safe at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
xfrm_timer_handler+0x91/0xd70
__hrtimer_run_queues+0x1dd/0xa60
hrtimer_run_softirq+0x146/0x2e0
handle_softirqs+0x266/0x860
irq_exit_rcu+0x115/0x1a0
sysvec_apic_timer_interrupt+0x6e/0x90
asm_sysvec_apic_timer_interrupt+0x16/0x20
default_idle+0x13/0x20
default_idle_call+0x67/0xa0
do_idle+0x2da/0x320
cpu_startup_entry+0x50/0x60
start_secondary+0x213/0x2a0
common_startup_64+0x129/0x138
to a SOFTIRQ-irq-unsafe lock:
(&xa->xa_lock#24){+.+.}-{3:3}
Mark Zhang [Wed, 15 Jan 2025 11:39:07 +0000 (13:39 +0200)]
net/mlx5: Clear port select structure when fail to create
Clear the port select structure on error so no stale values left after
definers are destroyed. That's because the mlx5_lag_destroy_definers()
always try to destroy all lag definers in the tt_map, so in the flow
below lag definers get double-destroyed and cause kernel crash:
Fixes: dc48516ec7d3 ("net/mlx5: Lag, add support to create definers for LAG") Signed-off-by: Mark Zhang <markzhang@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Chris Mi [Wed, 15 Jan 2025 11:39:06 +0000 (13:39 +0200)]
net/mlx5: SF, Fix add port error handling
If failed to add SF, error handling doesn't delete the SF from the
SF table. But the hw resources are deleted. So when unload driver,
hw resources will be deleted again. Firmware will report syndrome
0x68def3 which means "SF is not allocated can not deallocate".
Fix it by delete SF from SF table if failed to add SF.
Fixes: 2597ee190b4e ("net/mlx5: Call mlx5_sf_id_erase() once in mlx5_sf_dealloc()") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Shay Drori <shayd@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Patrisious Haddad [Wed, 15 Jan 2025 11:39:04 +0000 (13:39 +0200)]
net/mlx5: Fix RDMA TX steering prio
User added steering rules at RDMA_TX were being added to the first prio,
which is the counters prio.
Fix that so that they are correctly added to the BYPASS_PRIO instead.
Fixes: 24670b1a3166 ("net/mlx5: Add support for RDMA TX steering") Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Su Yue [Mon, 6 Jan 2025 14:06:40 +0000 (22:06 +0800)]
ocfs2: check dir i_size in ocfs2_find_entry
syz reports an out of bounds read:
==================================================================
BUG: KASAN: slab-out-of-bounds in ocfs2_match fs/ocfs2/dir.c:334
[inline]
BUG: KASAN: slab-out-of-bounds in ocfs2_search_dirblock+0x283/0x6e0
fs/ocfs2/dir.c:367
Read of size 1 at addr ffff88804d8b9982 by task syz-executor.2/14802
The two reports are all caused invalid negative i_size of dir inode. For
ocfs2, dir_inode can't be negative or zero.
Here add a check in which is called by ocfs2_check_dir_for_entry(). It
fixes the second report as ocfs2_check_dir_for_entry() must be called
before ocfs2_prepare_dir_for_insert(). Also set a up limit for dir with
OCFS2_INLINE_DATA_FL. The i_size can't be great than blocksize.
Yosry Ahmed [Mon, 13 Jan 2025 21:44:58 +0000 (21:44 +0000)]
mm: zswap: move allocations during CPU init outside the lock
In zswap_cpu_comp_prepare(), allocations are made and assigned to various
members of acomp_ctx under acomp_ctx->mutex. However, allocations may
recurse into zswap through reclaim, trying to acquire the same mutex and
deadlocking.
Move the allocations before the mutex critical section. Only the
initialization of acomp_ctx needs to be done with the mutex held.
Link: https://lkml.kernel.org/r/20250113214458.2123410-1-yosryahmed@google.com Fixes: 12dcb0ef5406 ("mm: zswap: properly synchronize freeing resources during CPU hotunplug") Signed-off-by: Yosry Ahmed <yosryahmed@google.com> Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This indicates that the pgoff is unaligned. After analysis, I confirm the
vma is mapped to /dev/zero. Such a vma certainly has vm_file, but it is
set to anonymous by mmap_zero(). So even if it's mmapped by 2m-unaligned,
it can pass the check in thp_vma_allowable_order() as it is an
anonymous-mmap, but then be collapsed as a file-mmap.
It seems the problem has existed for a long time, but actually, since we
have khugepaged_max_ptes_none check before, we will skip collapse it as it
is /dev/zero and so has no present page. But commit d8ea7cc8547c limit
the check for only khugepaged, so the BUG_ON() can be triggered by
madvise_collapse().
Add vma_is_anonymous() check to make such vma be processed by
hpage_collapse_scan_pmd().
Link: https://lkml.kernel.org/r/20250111034511.2223353-1-liushixin2@huawei.com Fixes: d8ea7cc8547c ("mm/khugepaged: add flag to predicate khugepaged-only behavior") Signed-off-by: Liu Shixin <liushixin2@huawei.com> Reviewed-by: Yang Shi <yang@os.amperecomputing.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Chengming Zhou <chengming.zhou@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Mattew Wilcox <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nanyong Sun <sunnanyong@huawei.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
zihan zhou [Wed, 25 Dec 2024 02:10:35 +0000 (10:10 +0800)]
mm: page_alloc: fix missed updates of lowmem_reserve in adjust_managed_page_count
In the kernel, the zone's lowmem_reserve and _watermark, and the global
variable 'totalreserve_pages' depend on the value of managed_pages, but
after running adjust_managed_page_count, these values aren't updated,
which causes some problems.
For example, in a system with six 1GB large pages, we found that the value
of protection in zoneinfo (zone->lowmem_reserve), is not right. Its value
seems to be calculated from the initial managed_pages, but after the
managed_pages changed, was not updated. Only after reading the file
/proc/sys/vm/lowmem_reserve_ratio, updates happen.
lowmem_reserve increased also makes the totalreserve_pages increased,
which causes a decrease in available memory. The one above is just a test
machine, and the increase is not significant. On our online machine, the
reserved memory will increase by several GB due to reading this file. It
is clearly unreasonable to cause a sharp drop in available memory just by
reading a file.
In this patch, we update reserve memory when update managed_pages, The
size of reserved memory becomes stable. But it seems that the _watermark
should also be updated along with the managed_pages. We have not done it
because we are unsure if it is reasonable to set the watermark through the
initial managed_pages. If it is not reasonable, we will propose new
patch.
Pavel Begunkov [Wed, 8 Jan 2025 22:06:22 +0000 (14:06 -0800)]
net: make page_pool_ref_netmem work with net iovs
page_pool_ref_netmem() should work with either netmem representation, but
currently it casts to a page with netmem_to_page(), which will fail with
net iovs. Use netmem_get_pp_ref_count_ref() instead.
Fixes: 8ab79ed50cf1 ("page_pool: devmem support") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/20250108220644.3528845-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paulo Alcantara [Tue, 14 Jan 2025 15:48:48 +0000 (12:48 -0300)]
smb: client: fix double free of TCP_Server_Info::hostname
When shutting down the server in cifs_put_tcp_session(), cifsd thread
might be reconnecting to multiple DFS targets before it realizes it
should exit the loop, so @server->hostname can't be freed as long as
cifsd thread isn't done. Otherwise the following can happen:
Fixes: 7be3248f3139 ("cifs: To match file servers, make sure the server hostname matches") Reported-by: Jay Shin <jaeshin@redhat.com> Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
David Lechner [Wed, 15 Jan 2025 20:48:27 +0000 (14:48 -0600)]
hwmon: (ltc2991) Fix mixed signed/unsigned in DIV_ROUND_CLOSEST
Fix use of DIV_ROUND_CLOSEST where a possibly negative value is divided
by an unsigned type by casting the unsigned type to the signed type of
the same size (st->r_sense_uohm[channel] has type of u32).
The docs on the DIV_ROUND_CLOSEST macro explain that dividing a negative
value by an unsigned type is undefined behavior. The actual behavior is
that it converts both values to unsigned before doing the division, for
example:
Heiner Kallweit [Sun, 12 Jan 2025 21:59:59 +0000 (22:59 +0100)]
net: ethernet: xgbe: re-add aneg to supported features in PHY quirks
In 4.19, before the switch to linkmode bitmaps, PHY_GBIT_FEATURES
included feature bits for aneg and TP/MII ports.
SUPPORTED_TP | \
SUPPORTED_MII)
SUPPORTED_10baseT_Full)
SUPPORTED_100baseT_Full)
SUPPORTED_1000baseT_Full)
PHY_100BT_FEATURES | \
PHY_DEFAULT_FEATURES)
PHY_1000BT_FEATURES)
Referenced commit expanded PHY_GBIT_FEATURES, silently removing
PHY_DEFAULT_FEATURES. The removed part can be re-added by using
the new PHY_GBIT_FEATURES definition.
Not clear to me is why nobody seems to have noticed this issue.
I stumbled across this when checking what it takes to make
phy_10_100_features_array et al private to phylib.
Vladimir Oltean [Tue, 14 Jan 2025 16:47:21 +0000 (18:47 +0200)]
net: pcs: xpcs: actively unset DW_VR_MII_DIG_CTRL1_2G5_EN for 1G SGMII
xpcs_config_2500basex() sets DW_VR_MII_DIG_CTRL1_2G5_EN, but
xpcs_config_aneg_c37_sgmii() never unsets it. So, on a protocol change
from 2500base-x to sgmii, the DW_VR_MII_DIG_CTRL1_2G5_EN bit will remain
set.
Fixes: f27abde3042a ("net: pcs: add 2500BASEX support for Intel mGbE controller") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250114164721.2879380-2-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 14 Jan 2025 16:47:20 +0000 (18:47 +0200)]
net: pcs: xpcs: fix DW_VR_MII_DIG_CTRL1_2G5_EN bit being set for 1G SGMII w/o inband
On a port with SGMII fixed-link at SPEED_1000, DW_VR_MII_DIG_CTRL1 gets
set to 0x2404. This is incorrect, because bit 2 (DW_VR_MII_DIG_CTRL1_2G5_EN)
is set.
It comes from the previous write to DW_VR_MII_AN_CTRL, because the "val"
variable is reused and is dirty. Actually, its value is 0x4, aka
FIELD_PREP(DW_VR_MII_PCS_MODE_MASK, DW_VR_MII_PCS_MODE_C37_SGMII).
Resolve the issue by clearing "val" to 0 when writing to a new register.
After the fix, the register value is 0x2400.
Prior to the blamed commit, when the read-modify-write was open-coded,
the code saved the content of the DW_VR_MII_DIG_CTRL1 register in the
"ret" variable.
Fixes: ce8d6081fcf4 ("net: pcs: xpcs: add _modify() accessors") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250114164721.2879380-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wolfram Sang [Wed, 15 Jan 2025 16:23:47 +0000 (17:23 +0100)]
i2c: testunit: on errors, repeat NACK until STOP
This backend requests a NACK from the controller driver when it detects
an error. If that request gets ignored from some reason, subsequent
accesses will wrongly be handled OK. To fix this, an error now changes
the state machine, so the backend will report NACK until a STOP
condition has been detected. This make the driver more robust against
controllers which will sadly apply the NACK not to the current byte but
the next one.
Wolfram Sang [Wed, 15 Jan 2025 12:36:23 +0000 (13:36 +0100)]
i2c: rcar: fix NACK handling when being a target
When this controller is a target, the NACK handling had two issues.
First, the return value from the backend was not checked on the initial
WRITE_REQUESTED. So, the driver missed to send a NACK in this case.
Also, the NACK always arrives one byte late on the bus, even in the
WRITE_RECEIVED case. This seems to be a HW issue. We should then not
rely on the backend to correctly NACK the superfluous byte as well. Fix
both issues by introducing a flag which gets set whenever the backend
requests a NACK and keep sending it until we get a STOP condition.
The commit uses data nbits instead of addr nbits for dummy phase. This
causes a regression for all boards where spi-tx-bus-width is smaller
than spi-rx-bus-width. It is a common pattern for boards to have
spi-tx-bus-width == 1 and spi-rx-bus-width > 1. The regression causes
all reads with a dummy phase to become unavailable for such boards,
leading to a usually slower 0-dummy-cycle read being selected.
Most controllers' supports_op hooks call spi_mem_default_supports_op().
In spi_mem_default_supports_op(), spi_mem_check_buswidth() is called to
check if the buswidths for the op can actually be supported by the
board's wiring. This wiring information comes from (among other things)
the spi-{tx,rx}-bus-width DT properties. Based on these properties,
SPI_TX_* or SPI_RX_* flags are set by of_spi_parse_dt().
spi_mem_check_buswidth() then uses these flags to make the decision
whether an op can be supported by the board's wiring (in a way,
indirectly checking against spi-{rx,tx}-bus-width).
Now the tricky bit here is that spi_mem_check_buswidth() does:
if (op->dummy.nbytes &&
spi_check_buswidth_req(mem, op->dummy.buswidth, true))
return false;
The true argument to spi_check_buswidth_req() means the op is treated as
a TX op. For a board that has say 1-bit TX and 4-bit RX, a 4-bit dummy
TX is considered as unsupported, and the op gets rejected.
The commit being reverted uses the data buswidth for dummy buswidth. So
for reads, the RX buswidth gets used for the dummy phase, uncovering
this issue. In reality, a dummy phase is neither RX nor TX. As the name
suggests, these are just dummy cycles that send or receive no data, and
thus don't really need to have any buswidth at all.
Ideally, dummy phases should not be checked against the board's wiring
capabilities at all, and should only be sanity-checked for having a sane
buswidth value. Since we are now at rc7 and such a change might
introduce many unexpected bugs, revert the commit for now. It can be
sent out later along with the spi_mem_check_buswidth() fix.
Fixes: 98d1fb94ce75 ("mtd: spi-nor: core: replace dummy buswidth from addr to data") Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com> Closes: https://lore.kernel.org/linux-mtd/3342163.44csPzL39Z@steina-w/ Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> Signed-off-by: Pratyush Yadav <pratyush@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
syzbot triggered the warning in posixtimer_send_sigqueue(), which warns
about a non-ignored signal being already queued on the ignored list.
The warning is actually bogus, as the following sequence causes this:
signal($SIG, SIGIGN);
timer_settime(...); // arm periodic timer
timer fires, signal is ignored and queued on ignored list
sigprocmask(SIG_BLOCK, ...); // block the signal
timer_settime(...); // re-arm periodic timer
timer fires, signal is not ignored because it is blocked
---> Warning triggers as signal is on the ignored list
Ideally timer_settime() could remove the signal, but that's racy and
incomplete vs. other scenarios and requires a full reevaluation of the
pending signal list.
Instead of adding more complexity, handle it gracefully by removing the
warning and requeueing the signal to the pending list. That's correct
versus:
1) sig[timed]wait() as that does not check for SIGIGN and only relies on
dequeue_signal() -> posixtimers_deliver_signal() to check whether the
pending signal is still valid.
2) Unblocking of the signal.
- If the unblocking happens before SIGIGN is replaced by a signal
handler, then the timer is rearmed in dequeue_signal(), but
get_signal() will ignore it. The next timer expiry will move it back
to the ignored list.
- If SIGIGN was replaced before unblocking, then the signal will be
delivered and a subsequent expiry will queue a signal on the pending
list again.
There is a related scenario to trigger the complementary warning in the
signal ignored path, which does not expect the signal to be on the pending
list when it is ignored. That can be triggered even before the above change
via:
timer_create(); // Signal target is task2
timer_settime(...); // arm periodic timer
timer fires, signal is not ignored because it is blocked
and queued on the pending list of task2
syscall()
// Sets the pending flag
sigprocmask(SIG_UNBLOCK, ...);
-> preemption, task2 cannot dequeue the signal
timer_settime(...); // re-arm periodic timer
timer fires, signal is ignored
---> Warning triggers as signal is on task2's pending list
and the thread group is not exiting
Consequently, remove that warning too and just keep the signal on the
pending list.
The following attempt to deliver the signal on return to user space of
task2 will ignore the signal and a subsequent expiry will bring it back to
the ignored list, if it did not get blocked or un-ignored before that.
Jens Axboe [Wed, 15 Jan 2025 15:39:15 +0000 (08:39 -0700)]
io_uring/register: cache old SQ/CQ head reading for copies
The SQ and CQ ring heads are read twice - once for verifying that it's
within bounds, and once inside the loops copying SQE and CQE entries.
This is technically incorrect, in case the values could get modified
in between verifying them and using them in the copy loop. While this
won't lead to anything truly nefarious, it may cause longer loop times
for the copies than expected.
Read the ring head values once, and use the verified value in the copy
loops.
Jens Axboe [Wed, 15 Jan 2025 15:23:55 +0000 (08:23 -0700)]
io_uring/register: document io_register_resize_rings() shared mem usage
It can be a bit hard to tell which parts of io_register_resize_rings()
are operating on shared memory, and which ones are not. And anything
reading or writing to those regions should really use the read/write
once primitives.
Hence add those, ensuring sanity in how this memory is accessed, and
helping document the shared nature of it.
Jens Axboe [Wed, 15 Jan 2025 14:39:12 +0000 (07:39 -0700)]
io_uring/register: use stable SQ/CQ ring data during resize
Normally the kernel would not expect an application to modify any of
the data shared with the kernel during a resize operation, but of
course the kernel cannot always assume good intent on behalf of the
application.
As part of resizing the rings, existing SQEs and CQEs are copied over
to the new storage. Resizing uses the masks in the newly allocated
shared storage to index the arrays, however it's possible that malicious
userspace could modify these after they have been sanity checked.
Use the validated and locally stored CQ and SQ ring sizing for masking
to ensure the values are both stable and valid.
Russell Harmon [Wed, 15 Jan 2025 13:13:41 +0000 (05:13 -0800)]
hwmon: (drivetemp) Set scsi command timeout to 10s
There's at least one drive (MaxDigitalData OOS14000G) such that if it
receives a large amount of I/O while entering an idle power state will
first exit idle before responding, including causing SMART temperature
requests to be delayed.
This causes the drivetemp request to exceed its timeout of 1 second.
Kazuhiro Abe [Wed, 15 Jan 2025 07:35:32 +0000 (07:35 +0000)]
hwmon: (acpi_power_meter) Fix a check for the return value of read_domain_devices().
After commit fabb1f813ec0 ("hwmon: (acpi_power_meter) Fix fail to load
module on platform without _PMD method"),
the acpi_power_meter driver fails to load if the platform has _PMD method.
To address this, add a check for successful read_domain_devices().
Tested on Nvidia Grace machine.
Fixes: fabb1f813ec0 ("hwmon: (acpi_power_meter) Fix fail to load module on platform without _PMD method") Signed-off-by: Kazuhiro Abe <fj1078ii@aa.jp.fujitsu.com> Link: https://lore.kernel.org/r/20250115073532.3211000-1-fj1078ii@aa.jp.fujitsu.com
[groeck: Dropped unnecessary () from expression] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Maciej Patelczyk [Wed, 11 Dec 2024 11:17:27 +0000 (12:17 +0100)]
drm/xe: make change ccs_mode a synchronous action
If ccs_mode is being modified via
/sys/class/drm/cardX/device/tileY/gtY/ccs_mode
the asynchronous reset is triggered and the write returns immediately.
With that some test receive false information about number of CCS engines
or even fail if they proceed without delay after changing the ccs_mode.
Changing the ccs_mode change from async to sync to prevent failures in
tests.
Jesus Narvaez [Thu, 12 Dec 2024 19:01:00 +0000 (11:01 -0800)]
drm/xe/guc: Adding steering info support for GuC register lists
The guc_mmio_reg interface supports steering, but it is currently not
implemented. This will allow the GuC to control steering of MMIO
registers after save-restore and avoid reading from fused off MCR
register instances.
Fixes: 9c57bc08652a ("drm/xe/lnl: Drop force_probe requirement") Signed-off-by: Jesus Narvaez <jesus.narvaez@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241212190100.3768068-1-jesus.narvaez@intel.com
(cherry picked from commit ee5a1321df90891d59d83b7c9d5b6c5b755d059d) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / users / dwmw2 / linux.git / log