Yonglong Liu [Tue, 7 May 2024 13:42:24 +0000 (21:42 +0800)]
net: hns3: fix kernel crash when devlink reload during initialization
The devlink reload process will access the hardware resources,
but the register operation is done before the hardware is initialized.
So, processing the devlink reload during initialization may lead to kernel
crash.
This patch fixes this by registering the devlink after
hardware initialization.
Fixes: cd6242991d2e ("net: hns3: add support for registering devlink for VF") Fixes: 93305b77ffcb ("net: hns3: fix kernel crash when devlink reload during pf initialization") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Yonglong Liu [Tue, 7 May 2024 13:42:23 +0000 (21:42 +0800)]
net: hns3: fix port vlan filter not disabled issue
According to hardware limitation, for device support modify
VLAN filter state but not support bypass port VLAN filter,
it should always disable the port VLAN filter. but the driver
enables port VLAN filter when initializing, if there is no
VLAN(except VLAN 0) id added, the driver will disable it
in service task. In most time, it works fine. But there is
a time window before the service task shceduled and net device
being registered. So if user adds VLAN at this time, the driver
will not update the VLAN filter state, and the port VLAN filter
remains enabled.
To fix the problem, if support modify VLAN filter state but not
support bypass port VLAN filter, set the port vlan filter to "off".
Fixes: 184cd221a863 ("net: hns3: disable port VLAN filter when support function level VLAN filter control") Fixes: 2ba306627f59 ("net: hns3: add support for modify VLAN filter state") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Peiyang Wang [Tue, 7 May 2024 13:42:22 +0000 (21:42 +0800)]
net: hns3: use appropriate barrier function after setting a bit value
There is a memory barrier in followed case. When set the port down,
hclgevf_set_timmer will set DOWN in state. Meanwhile, the service task has
different behaviour based on whether the state is DOWN. Thus, to make sure
service task see DOWN, use smp_mb__after_atomic after calling set_bit().
Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main") Fixes: 1c6dfe6fc6f7 ("net: hns3: remove mailbox and reset work in hclge_main") Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Peiyang Wang [Tue, 7 May 2024 13:42:21 +0000 (21:42 +0800)]
net: hns3: release PTP resources if pf initialization failed
During the PF initialization process, hclge_update_port_info may return an
error code for some reason. At this point, the ptp initialization has been
completed. To void memory leaks, the resources that are applied by ptp
should be released. Therefore, when hclge_update_port_info returns an error
code, hclge_ptp_uninit is called to release the corresponding resources.
Fixes: eaf83ae59e18 ("net: hns3: add querying fec ability from firmware") Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Peiyang Wang [Tue, 7 May 2024 13:42:20 +0000 (21:42 +0800)]
net: hns3: change type of numa_node_mask as nodemask_t
It provides nodemask_t to describe the numa node mask in kernel. To
improve transportability, change the type of numa_node_mask as nodemask_t.
Fixes: 38caee9d3ee8 ("net: hns3: Add support of the HNAE3 framework") Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jian Shen [Tue, 7 May 2024 13:42:19 +0000 (21:42 +0800)]
net: hns3: direct return when receive a unknown mailbox message
Currently, the driver didn't return when receive a unknown
mailbox message, and continue checking whether need to
generate a response. It's unnecessary and may be incorrect.
Fixes: bb5790b71bad ("net: hns3: refactor mailbox response scheme between PF and VF") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Peiyang Wang [Tue, 7 May 2024 13:42:18 +0000 (21:42 +0800)]
net: hns3: using user configure after hardware reset
When a reset occurring, it's supposed to recover user's configuration.
Currently, the port info(speed, duplex and autoneg) is stored in hclge_mac
and will be scheduled updated. Consider the case that reset was happened
consecutively. During the first reset, the port info is configured with
a temporary value cause the PHY is reset and looking for best link config.
Second reset start and use pervious configuration which is not the user's.
The specific process is as follows:
To avoid aboved situation, this patch introduced req_speed, req_duplex,
req_autoneg to store user's configuration and it only be used after
hardware reset and to recover user's configuration
Fixes: f5f2b3e4dcc0 ("net: hns3: add support for imp-controlled PHYs") Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Wen Gu [Tue, 7 May 2024 12:53:31 +0000 (20:53 +0800)]
net/smc: fix neighbour and rtable leak in smc_ib_find_route()
In smc_ib_find_route(), the neighbour found by neigh_lookup() and rtable
resolved by ip_route_output_flow() are not released or put before return.
It may cause the refcount leak, so fix it.
Eric Dumazet [Tue, 7 May 2024 16:18:42 +0000 (16:18 +0000)]
ipv6: prevent NULL dereference in ip6_output()
According to syzbot, there is a chance that ip6_dst_idev()
returns NULL in ip6_output(). Most places in IPv6 stack
deal with a NULL idev just fine, but not here.
Lukasz Majewski [Tue, 7 May 2024 11:12:14 +0000 (13:12 +0200)]
hsr: Simplify code for announcing HSR nodes timer setup
Up till now the code to start HSR announce timer, which triggers sending
supervisory frames, was assuming that hsr_netdev_notify() would be called
at least twice for hsrX interface. This was required to have different
values for old and current values of network device's operstate.
This is problematic for a case where hsrX interface is already in the
operational state when hsr_netdev_notify() is called, so timer is not
configured to trigger and as a result the hsrX is not sending supervisory
frames to HSR ring.
This error has been discovered when hsr_ping.sh script was run. To be
more specific - for the hsr1 and hsr2 the hsr_netdev_notify() was
called at least twice with different IF_OPER_{LOWERDOWN|DOWN|UP} states
assigned in hsr_check_carrier_and_operstate(hsr). As a result there was
no issue with sending supervisory frames.
However, with hsr3, the notify function was called only once with
operstate set to IF_OPER_UP and timer responsible for triggering
supervisory frames was not fired.
The solution is to use netif_oper_up() and netif_running() helper
functions to assess if network hsrX device is up.
Only then, when the timer is not already pending, it is started.
Otherwise it is deactivated.
Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240507111214.3519800-1-lukma@denx.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Golle [Tue, 7 May 2024 12:20:43 +0000 (13:20 +0100)]
dt-bindings: net: mediatek: remove wrongly added clocks and SerDes
Several clocks as well as both sgmiisys phandles were added by mistake
to the Ethernet bindings for MT7988. Also, the total number of clocks
didn't match with the actual number of items listed.
This happened because the vendor driver which served as a reference uses
a high number of syscon phandles to access various parts of the SoC
which wasn't acceptable upstream. Hence several parts which have never
previously been supported (such SerDes PHY and USXGMII PCS) are going to
be implemented by separate drivers. As a result the device tree will
look much more sane.
Quickly align the bindings with the upcoming reality of the drivers
actually adding support for the remaining Ethernet-related features of
the MT7988 SoC.
(1) Fix the congestion control algorithm to start cwnd at 4 and to not cut
ssthresh when the peer cuts its rwind size.
(2) Only transmit a single ACK for all the DATA packets glued together
into a jumbo packet to reduce the number of ACKs being generated.
====================
David Howells [Fri, 3 May 2024 15:07:40 +0000 (16:07 +0100)]
rxrpc: Only transmit one ACK per jumbo packet received
Only generate one ACK packet for all the subpackets in a jumbo packet. If
we would like to generate more than one ACK, we prioritise them base on
their reason code, in the order, highest first:
For the first four, we reference the lowest offending subpacket; for the
last three, the highest.
This reduces the number of ACKs we end up transmitting to one per UDP
packet transmitted to reduce network loading and packet parsing.
Fixes: 5d7edbc9231e ("rxrpc: Get rid of the Rx ring") Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org Reviewed-by: Jeffrey Altman <jaltman@auristor.com <mailto:jaltman@auristor.com>> Link: https://lore.kernel.org/r/20240503150749.1001323-3-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Howells [Fri, 3 May 2024 15:07:39 +0000 (16:07 +0100)]
rxrpc: Fix congestion control algorithm
Make the following fixes to the congestion control algorithm:
(1) Don't vary the cwnd starting value by the size of RXRPC_TX_SMSS since
that's currently held constant - set to the size of a jumbo subpacket
payload so that we can create jumbo packets on the fly. The current
code invariably picks 3 as the starting value.
Further, the starting cwnd needs to be an even number because we ack
every other packet, so set it to 4.
(2) Don't cut ssthresh when we see an ACK come from the peer with a
receive window (rwind) less than ssthresh. ssthresh keeps track of
characteristics of the connection whereas rwind may be reduced by the
peer for any reason - and may be reduced to 0.
Fixes: 1fc4fa2ac93d ("rxrpc: Fix congestion management") Fixes: 0851115090a3 ("rxrpc: Reduce ssthresh to peer's receive window") Signed-off-by: David Howells <dhowells@redhat.com> Suggested-by: Simon Wilkinson <sxw@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org Reviewed-by: Jeffrey Altman <jaltman@auristor.com <mailto:jaltman@auristor.com>> Link: https://lore.kernel.org/r/20240503150749.1001323-2-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Tue, 7 May 2024 11:30:33 +0000 (14:30 +0300)]
selftests: test_bridge_neigh_suppress.sh: Fix failures due to duplicate MAC
When creating the topology for the test, three veth pairs are created in
the initial network namespace before being moved to one of the network
namespaces created by the test.
On systems where systemd-udev uses MACAddressPolicy=persistent (default
since systemd version 242), this will result in some net devices having
the same MAC address since they were created with the same name in the
initial network namespace. In turn, this leads to arping / ndisc6
failing since packets are dropped by the bridge's loopback filter.
Fix by creating each net device in the correct network namespace instead
of moving it there from the initial network namespace.
Shigeru Yoshida [Mon, 6 May 2024 14:11:29 +0000 (23:11 +0900)]
ipv6: Fix potential uninit-value access in __ip6_make_skb()
As it was done in commit fc1092f51567 ("ipv4: Fix uninit-value access in
__ip_make_skb()") for IPv4, check FLOWI_FLAG_KNOWN_NH on fl6->flowi6_flags
instead of testing HDRINCL on the socket to avoid a race condition which
causes uninit-value access.
Fixes: ea30388baebc ("ipv6: Fix an uninit variable access bug in __ip6_make_skb()") Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gregor Herburger [Mon, 6 May 2024 06:24:33 +0000 (08:24 +0200)]
net: phy: marvell-88q2xxx: add support for Rev B1 and B2
Different revisions of the Marvell 88q2xxx phy needs different init
sequences.
Add init sequence for Rev B1 and Rev B2. Rev B2 init sequence skips one
register write.
Tested-by: Dimitri Fedrau <dima.fedrau@gmail.com> Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vincent Duvert [Sun, 5 May 2024 18:54:57 +0000 (11:54 -0700)]
appletalk: Improve handling of broadcast packets
When a broadcast AppleTalk packet is received, prefer queuing it on the
socket whose address matches the address of the interface that received
the packet (and is listening on the correct port). Userspace
applications that handle such packets will usually send a response on
the same socket that received the packet; this fix allows the response
to be sent on the correct interface.
If a socket matching the interface's address is not found, an arbitrary
socket listening on the correct port will be used, if any. This matches
the implementation's previous behavior.
Fixes atalkd's responses to network information requests when multiple
network interfaces are configured to use AppleTalk.
Felix Fietkau [Sun, 5 May 2024 18:42:38 +0000 (20:42 +0200)]
net: bridge: fix corrupted ethernet header on multicast-to-unicast
The change from skb_copy to pskb_copy unfortunately changed the data
copying to omit the ethernet header, since it was pulled before reaching
this point. Fix this by calling __skb_push/pull around pskb_copy.
Fixes: 59c878cbcdd8 ("net: bridge: fix multicast-to-unicast with fraglist GSO") Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Tetsuo Handa [Sun, 5 May 2024 10:36:49 +0000 (19:36 +0900)]
nfc: nci: Fix kcov check in nci_rx_work()
Commit 7e8cdc97148c ("nfc: Add KCOV annotations") added
kcov_remote_start_common()/kcov_remote_stop() pair into nci_rx_work(),
with an assumption that kcov_remote_stop() is called upon continue of
the for loop. But commit d24b03535e5e ("nfc: nci: Fix uninit-value in
nci_dev_up and nci_ntf_packet") forgot to call kcov_remote_stop() before
break of the for loop.
Reported-by: syzbot <syzbot+0438378d6f157baae1a2@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=0438378d6f157baae1a2 Fixes: d24b03535e5e ("nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet") Suggested-by: Andrey Konovalov <andreyknvl@gmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/6d10f829-5a0c-405a-b39a-d7266f3a1a0b@I-love.SAKURA.ne.jp Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Donald Hunter [Fri, 3 May 2024 16:43:04 +0000 (17:43 +0100)]
netlink: specs: Add missing bridge linkinfo attrs
Attributes for FDB learned entries were added to the if_link netlink api
for bridge linkinfo but are missing from the rt_link.yaml spec. Add the
missing attributes to the spec.
Fixes: ddd1ad68826d ("net: bridge: Add netlink knobs for number / max learned FDB entries") Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240503164304.87427-1-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Thadeu Lima de Souza Cascardo [Thu, 2 May 2024 13:20:06 +0000 (10:20 -0300)]
net: fix out-of-bounds access in ops_init
net_alloc_generic is called by net_alloc, which is called without any
locking. It reads max_gen_ptrs, which is changed under pernet_ops_rwsem. It
is read twice, first to allocate an array, then to set s.len, which is
later used to limit the bounds of the array access.
It is possible that the array is allocated and another thread is
registering a new pernet ops, increments max_gen_ptrs, which is then used
to set s.len with a larger than allocated length for the variable array.
Fix it by reading max_gen_ptrs only once in net_alloc_generic. If
max_gen_ptrs is later incremented, it will be caught in net_assign_generic.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Fixes: 073862ba5d24 ("netns: fix net_alloc_generic()") Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240502132006.3430840-1-cascardo@igalia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Each attribute inside a nested IFLA_VF_VLAN_LIST is assumed to be a
struct ifla_vf_vlan_info so the size of such attribute needs to be at least
of sizeof(struct ifla_vf_vlan_info) which is 14 bytes.
The current size validation in do_setvfinfo is against NLA_HDRLEN (4 bytes)
which is less than sizeof(struct ifla_vf_vlan_info) so this validation
is not enough and a too small attribute might be cast to a
struct ifla_vf_vlan_info, this might result in an out of bands
read access when accessing the saved (casted) entry in ivvl.
Fixes: 79aab093a0b5 ("net: Update API for VF vlan protocol 802.1ad support") Signed-off-by: Roded Zats <rzats@paloaltonetworks.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20240502155751.75705-1-rzats@paloaltonetworks.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1) Fix an error pointer dereference in xfrm_in_fwd_icmp.
From Antony Antony.
2) Preserve vlan tags for ESP transport mode software GRO.
From Paul Davey.
3) Fix a spelling mistake in an uapi xfrm.h comment.
From Anotny Antony.
* tag 'ipsec-2024-05-02' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Correct spelling mistake in xfrm.h comment
xfrm: Preserve vlan tags for transport mode software GRO
xfrm: fix possible derferencing in error path
====================
Marek Vasut [Thu, 2 May 2024 18:32:59 +0000 (20:32 +0200)]
net: ks8851: Queue RX packets in IRQ handler instead of disabling BHs
Currently the driver uses local_bh_disable()/local_bh_enable() in its
IRQ handler to avoid triggering net_rx_action() softirq on exit from
netif_rx(). The net_rx_action() could trigger this driver .start_xmit
callback, which is protected by the same lock as the IRQ handler, so
calling the .start_xmit from netif_rx() from the IRQ handler critical
section protected by the lock could lead to an attempt to claim the
already claimed lock, and a hang.
The local_bh_disable()/local_bh_enable() approach works only in case
the IRQ handler is protected by a spinlock, but does not work if the
IRQ handler is protected by mutex, i.e. this works for KS8851 with
Parallel bus interface, but not for KS8851 with SPI bus interface.
Remove the BH manipulation and instead of calling netif_rx() inside
the IRQ handler code protected by the lock, queue all the received
SKBs in the IRQ handler into a queue first, and once the IRQ handler
exits the critical section protected by the lock, dequeue all the
queued SKBs and push them all into netif_rx(). At this point, it is
safe to trigger the net_rx_action() softirq, since the netif_rx()
call is outside of the lock that protects the IRQ handler.
Fixes: be0384bf599c ("net: ks8851: Handle softirqs at the end of IRQ thread to fix hang") Tested-by: Ronald Wahl <ronald.wahl@raritan.com> # KS8851 SPI Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240502183436.117117-1-marex@denx.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Johan Hovold [Wed, 1 May 2024 06:37:40 +0000 (08:37 +0200)]
Bluetooth: qca: fix firmware check error path
A recent commit fixed the code that parses the firmware files before
downloading them to the controller but introduced a memory leak in case
the sanity checks ever fail.
Make sure to free the firmware buffer before returning on errors.
Fixes: f905ae0be4b7 ("Bluetooth: qca: add missing firmware sanity checks") Cc: stable@vger.kernel.org # 4.19 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Duoming Zhou [Thu, 2 May 2024 12:57:36 +0000 (20:57 +0800)]
Bluetooth: l2cap: fix null-ptr-deref in l2cap_chan_timeout
There is a race condition between l2cap_chan_timeout() and
l2cap_chan_del(). When we use l2cap_chan_del() to delete the
channel, the chan->conn will be set to null. But the conn could
be dereferenced again in the mutex_lock() of l2cap_chan_timeout().
As a result the null pointer dereference bug will happen. The
KASAN report triggered by POC is shown below:
Add a check to judge whether the conn is null in l2cap_chan_timeout()
in order to mitigate the bug.
Fixes: 3df91ea20e74 ("Bluetooth: Revert to mutexes from RCU list") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Sungwoo Kim [Thu, 2 May 2024 16:09:31 +0000 (12:09 -0400)]
Bluetooth: HCI: Fix potential null-ptr-deref
Fix potential null-ptr-deref in hci_le_big_sync_established_evt().
Fixes: f777d8827817 (Bluetooth: ISO: Notify user space about failed bis connections) Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Johan Hovold [Wed, 1 May 2024 12:34:53 +0000 (14:34 +0200)]
Bluetooth: qca: fix info leak when fetching board id
Add the missing sanity check when fetching the board id to avoid leaking
slab data when later requesting the firmware.
Fixes: a7f8dedb4be2 ("Bluetooth: qca: add support for QCA2066") Cc: stable@vger.kernel.org # 6.7 Cc: Tim Jiang <quic_tjiang@quicinc.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Johan Hovold [Wed, 1 May 2024 12:34:52 +0000 (14:34 +0200)]
Bluetooth: qca: fix info leak when fetching fw build id
Add the missing sanity checks and move the 255-byte build-id buffer off
the stack to avoid leaking stack data through debugfs in case the
build-info reply is malformed.
Fixes: c0187b0bd3e9 ("Bluetooth: btqca: Add support to read FW build version for WCN3991 BTSoC") Cc: stable@vger.kernel.org # 5.12 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Johan Hovold [Tue, 30 Apr 2024 17:07:40 +0000 (19:07 +0200)]
Bluetooth: qca: fix NVM configuration parsing
The NVM configuration files used by WCN3988 and WCN3990/1/8 have two
sets of configuration tags that are enclosed by a type-length header of
type four which the current parser fails to account for.
Instead the driver happily parses random data as if it were valid tags,
something which can lead to the configuration data being corrupted if it
ever encounters the words 0x0011 or 0x001b.
As is clear from commit b63882549b2b ("Bluetooth: btqca: Fix the NVM
baudrate tag offcet for wcn3991") the intention has always been to
process the configuration data also for WCN3991 and WCN3998 which
encodes the baud rate at a different offset.
Fix the parser so that it can handle the WCN3xxx configuration files,
which has an enclosing type-length header of type four and two sets of
TLV tags enclosed by a type-length header of type two and three,
respectively.
Note that only the first set, which contains the tags the driver is
currently looking for, will be parsed for now.
With the parser fixed, the software in-band sleep bit will now be set
for WCN3991 and WCN3998 (as it is for later controllers) and the default
baud rate 3200000 may be updated by the driver also for WCN3xxx
controllers.
Notably the deep-sleep feature bit is already set by default in all
configuration files in linux-firmware.
Fixes: 4219d4686875 ("Bluetooth: btqca: Add wcn3990 firmware download support.") Cc: stable@vger.kernel.org # 4.19 Cc: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add the missing sanity checks when parsing the firmware files before
downloading them to avoid accessing and corrupting memory beyond the
vmalloced buffer.
Fixes: 83e81961ff7e ("Bluetooth: btqca: Introduce generic QCA ROME support") Cc: stable@vger.kernel.org # 4.10 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
==================================================================
BUG: KASAN: slab-use-after-free in __mutex_lock_common
kernel/locking/mutex.c:587 [inline]
BUG: KASAN: slab-use-after-free in __mutex_lock+0x8f/0xc30
kernel/locking/mutex.c:752
Read of size 8 at addr ffff888106cbbca8 by task kworker/u5:2/309
Fixes: bf6a4e30ffbd ("Bluetooth: disable advertisement filters during suspend") Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Sungwoo Kim [Tue, 30 Apr 2024 06:32:10 +0000 (02:32 -0400)]
Bluetooth: L2CAP: Fix slab-use-after-free in l2cap_connect()
Extend a critical section to prevent chan from early freeing.
Also make the l2cap_connect() return type void. Nothing is using the
returned value but it is ugly to return a potentially freed pointer.
Making it void will help with backports because earlier kernels did use
the return value. Now the compile will break for kernels where this
patch is not a complete fix.
==================================================================
BUG: KASAN: slab-use-after-free in instrument_atomic_read
include/linux/instrumented.h:68 [inline]
BUG: KASAN: slab-use-after-free in _test_bit
include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
BUG: KASAN: slab-use-after-free in l2cap_connect+0xa67/0x11a0
net/bluetooth/l2cap_core.c:4260
Read of size 8 at addr ffff88810bf040a0 by task kworker/u3:1/311
Fixes: 73ffa904b782 ("Bluetooth: Move conf_{req,rsp} stuff to struct l2cap_chan") Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Johan Hovold [Thu, 25 Apr 2024 07:55:03 +0000 (09:55 +0200)]
Bluetooth: qca: fix wcn3991 device address check
Qualcomm Bluetooth controllers may not have been provisioned with a
valid device address and instead end up using the default address
00:00:00:00:5a:ad.
This address is now used to determine if a controller has a valid
address or if one needs to be provided through devicetree or by user
space before the controller can be used.
It turns out that the WCN3991 controllers used in Chromium Trogdor
machines use a different default address, 39:98:00:00:5a:ad, which also
needs to be marked as invalid so that the correct address is fetched
from the devicetree.
Qualcomm has unfortunately not yet provided any answers as to whether
the 39:98 encodes a hardware id and if there are other variants of the
default address that needs to be handled by the driver.
For now, add the Trogdor WCN3991 default address to the device address
check to avoid having these controllers start with the default address
instead of their assigned addresses.
Fixes: 32868e126c78 ("Bluetooth: qca: fix invalid device address check") Cc: stable@vger.kernel.org # 6.5 Cc: Doug Anderson <dianders@chromium.org> Cc: Janaki Ramaiah Thota <quic_janathot@quicinc.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: Fix use-after-free bugs caused by sco_sock_timeout
When the sco connection is established and then, the sco socket
is releasing, timeout_work will be scheduled to judge whether
the sco disconnection is timeout. The sock will be deallocated
later, but it is dereferenced again in sco_sock_timeout. As a
result, the use-after-free bugs will happen. The root cause is
shown below:
[ 95.890016] ==================================================================
[ 95.890496] BUG: KASAN: slab-use-after-free in sco_sock_timeout+0x5e/0x1c0
[ 95.890755] Write of size 4 at addr ffff88800c388080 by task kworker/0:0/7
...
[ 95.890755] Workqueue: events sco_sock_timeout
[ 95.890755] Call Trace:
[ 95.890755] <TASK>
[ 95.890755] dump_stack_lvl+0x45/0x110
[ 95.890755] print_address_description+0x78/0x390
[ 95.890755] print_report+0x11b/0x250
[ 95.890755] ? __virt_addr_valid+0xbe/0xf0
[ 95.890755] ? sco_sock_timeout+0x5e/0x1c0
[ 95.890755] kasan_report+0x139/0x170
[ 95.890755] ? update_load_avg+0xe5/0x9f0
[ 95.890755] ? sco_sock_timeout+0x5e/0x1c0
[ 95.890755] kasan_check_range+0x2c3/0x2e0
[ 95.890755] sco_sock_timeout+0x5e/0x1c0
[ 95.890755] process_one_work+0x561/0xc50
[ 95.890755] worker_thread+0xab2/0x13c0
[ 95.890755] ? pr_cont_work+0x490/0x490
[ 95.890755] kthread+0x279/0x300
[ 95.890755] ? pr_cont_work+0x490/0x490
[ 95.890755] ? kthread_blkcg+0xa0/0xa0
[ 95.890755] ret_from_fork+0x34/0x60
[ 95.890755] ? kthread_blkcg+0xa0/0xa0
[ 95.890755] ret_from_fork_asm+0x11/0x20
[ 95.890755] </TASK>
[ 95.890755]
[ 95.890755] Allocated by task 506:
[ 95.890755] kasan_save_track+0x3f/0x70
[ 95.890755] __kasan_kmalloc+0x86/0x90
[ 95.890755] __kmalloc+0x17f/0x360
[ 95.890755] sk_prot_alloc+0xe1/0x1a0
[ 95.890755] sk_alloc+0x31/0x4e0
[ 95.890755] bt_sock_alloc+0x2b/0x2a0
[ 95.890755] sco_sock_create+0xad/0x320
[ 95.890755] bt_sock_create+0x145/0x320
[ 95.890755] __sock_create+0x2e1/0x650
[ 95.890755] __sys_socket+0xd0/0x280
[ 95.890755] __x64_sys_socket+0x75/0x80
[ 95.890755] do_syscall_64+0xc4/0x1b0
[ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f
[ 95.890755]
[ 95.890755] Freed by task 506:
[ 95.890755] kasan_save_track+0x3f/0x70
[ 95.890755] kasan_save_free_info+0x40/0x50
[ 95.890755] poison_slab_object+0x118/0x180
[ 95.890755] __kasan_slab_free+0x12/0x30
[ 95.890755] kfree+0xb2/0x240
[ 95.890755] __sk_destruct+0x317/0x410
[ 95.890755] sco_sock_release+0x232/0x280
[ 95.890755] sock_close+0xb2/0x210
[ 95.890755] __fput+0x37f/0x770
[ 95.890755] task_work_run+0x1ae/0x210
[ 95.890755] get_signal+0xe17/0xf70
[ 95.890755] arch_do_signal_or_restart+0x3f/0x520
[ 95.890755] syscall_exit_to_user_mode+0x55/0x120
[ 95.890755] do_syscall_64+0xd1/0x1b0
[ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f
[ 95.890755]
[ 95.890755] The buggy address belongs to the object at ffff88800c388000
[ 95.890755] which belongs to the cache kmalloc-1k of size 1024
[ 95.890755] The buggy address is located 128 bytes inside of
[ 95.890755] freed 1024-byte region [ffff88800c388000, ffff88800c388400)
[ 95.890755]
[ 95.890755] The buggy address belongs to the physical page:
[ 95.890755] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88800c38a800 pfn:0xc388
[ 95.890755] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 95.890755] anon flags: 0x100000000000840(slab|head|node=0|zone=1)
[ 95.890755] page_type: 0xffffffff()
[ 95.890755] raw: 0100000000000840ffff888006842dc000000000000000000000000000000001
[ 95.890755] raw: ffff88800c38a800000000000010000a00000001ffffffff0000000000000000
[ 95.890755] head: 0100000000000840ffff888006842dc000000000000000000000000000000001
[ 95.890755] head: ffff88800c38a800000000000010000a00000001ffffffff0000000000000000
[ 95.890755] head: 0100000000000003ffffea000030e201ffffea000030e24800000000ffffffff
[ 95.890755] head: 0000000800000000000000000000000000000000ffffffff0000000000000000
[ 95.890755] page dumped because: kasan: bad access detected
[ 95.890755]
[ 95.890755] Memory state around the buggy address:
[ 95.890755] ffff88800c387f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 95.890755] ffff88800c388000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 95.890755] >ffff88800c388080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 95.890755] ^
[ 95.890755] ffff88800c388100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 95.890755] ffff88800c388180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 95.890755] ==================================================================
Fix this problem by adding a check protected by sco_conn_lock to judget
whether the conn->hcon is null. Because the conn->hcon will be set to null,
when the sock is releasing.
Fixes: ba316be1b6a0 ("Bluetooth: schedule SCO timeouts with delayed_work") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Kuniyuki Iwashima [Wed, 1 May 2024 21:31:45 +0000 (14:31 -0700)]
tcp: Use refcount_inc_not_zero() in tcp_twsk_unique().
Anderson Nascimento reported a use-after-free splat in tcp_twsk_unique()
with nice analysis.
Since commit ec94c2696f0b ("tcp/dccp: avoid one atomic operation for
timewait hashdance"), inet_twsk_hashdance() sets TIME-WAIT socket's
sk_refcnt after putting it into ehash and releasing the bucket lock.
Thus, there is a small race window where other threads could try to
reuse the port during connect() and call sock_hold() in tcp_twsk_unique()
for the TIME-WAIT socket with zero refcnt.
If that happens, the refcnt taken by tcp_twsk_unique() is overwritten
and sock_put() will cause underflow, triggering a real use-after-free
somewhere else.
To avoid the use-after-free, we need to use refcount_inc_not_zero() in
tcp_twsk_unique() and give up on reusing the port if it returns false.
To fix this issue, change tcp_shutdown() to not
perform a TCP_SYN_RECV -> TCP_FIN_WAIT1 transition,
which makes no sense anyway.
When tcp_rcv_state_process() later changes socket state
from TCP_SYN_RECV to TCP_ESTABLISH, then look at
sk->sk_shutdown to finally enter TCP_FIN_WAIT1 state,
and send a FIN packet from a sane socket state.
This means tcp_send_fin() can now be called from BH
context, and must use GFP_ATOMIC allocations.
Linus Torvalds [Thu, 2 May 2024 15:51:47 +0000 (08:51 -0700)]
Merge tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf.
Relatively calm week, likely due to public holiday in most places. No
known outstanding regressions.
Current release - regressions:
- rxrpc: fix wrong alignmask in __page_frag_alloc_align()
- eth: e1000e: change usleep_range to udelay in PHY mdic access
Previous releases - regressions:
- gro: fix udp bad offset in socket lookup
- bpf: fix incorrect runtime stat for arm64
- tipc: fix UAF in error path
- netfs: fix a potential infinite loop in extract_user_to_sg()
- eth: ice: ensure the copied buf is NUL terminated
- eth: qeth: fix kernel panic after setting hsuid
Previous releases - always broken:
- bpf:
- verifier: prevent userspace memory access
- xdp: use flags field to disambiguate broadcast redirect
- bridge: fix multicast-to-unicast with fraglist GSO
- mptcp: ensure snd_nxt is properly initialized on connect
- nsh: fix outer header access in nsh_gso_segment().
- eth: bcmgenet: fix racing registers access
- eth: vxlan: fix stats counters.
Misc:
- a bunch of MAINTAINERS file updates"
* tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
MAINTAINERS: mark MYRICOM MYRI-10G as Orphan
MAINTAINERS: remove Ariel Elior
net: gro: add flush check in udp_gro_receive_segment
net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb
ipv4: Fix uninit-value access in __ip_make_skb()
s390/qeth: Fix kernel panic after setting hsuid
vxlan: Pull inner IP header in vxlan_rcv().
tipc: fix a possible memleak in tipc_buf_append
tipc: fix UAF in error path
rxrpc: Clients must accept conn from any address
net: core: reject skb_copy(_expand) for fraglist GSO skbs
net: bridge: fix multicast-to-unicast with fraglist GSO
mptcp: ensure snd_nxt is properly initialized on connect
e1000e: change usleep_range to udelay in PHY mdic access
net: dsa: mv88e6xxx: Fix number of databases for 88E6141 / 88E6341
cxgb4: Properly lock TX queue for the selftest.
rxrpc: Fix using alignmask being zero for __page_frag_alloc_align()
vxlan: Add missing VNI filter counter update in arp_reduce().
vxlan: Fix racy device stats updates.
net: qede: use return from qede_parse_actions()
...
====================
net: gro: add flush/flush_id checks and fix wrong offset in udp
This series fixes a bug in the complete phase of UDP in GRO, in which
socket lookup fails due to using network_header when parsing encapsulated
packets. The fix is to add network_offset and inner_network_offset to
napi_gro_cb and use these offsets for socket lookup.
In addition p->flush/flush_id should be checked in all UDP flows. The
same logic from tcp_gro_receive is applied for all flows in
udp_gro_receive_segment. This prevents packets with mismatching network
headers (flush/flush_id turned on) from merging in UDP GRO.
The original series includes a change to vxlan test which adds the local
parameter to prevent similar future bugs. I plan to submit it separately to
net-next.
This series is part of a previously submitted series to net-next:
https://lore.kernel.org/all/20240408141720.98832-1-richardbgobert@gmail.com/
v3 -> v4:
- Store network offsets, and use them only in udp_gro_complete flows
- Correct commit hash used in Fixes tag
- v3:
https://lore.kernel.org/netdev/20240424163045.123528-1-richardbgobert@gmail.com/
v2 -> v3:
- Add network_offsets and fix udp bug in a single commit to make backporting easier
- Write to inner_network_offset in {inet,ipv6}_gro_receive
- Use network_offsets union in tcp[46]_gro_complete as well
- v2:
https://lore.kernel.org/netdev/20240419153542.121087-1-richardbgobert@gmail.com/
v1 -> v2:
- Use network_offsets instead of p_poff param as suggested by Willem
- Check flush before postpull, and for all UDP GRO flows
- v1:
https://lore.kernel.org/netdev/20240412152120.115067-1-richardbgobert@gmail.com/
====================
Richard Gobert [Tue, 30 Apr 2024 14:35:55 +0000 (16:35 +0200)]
net: gro: add flush check in udp_gro_receive_segment
GRO-GSO path is supposed to be transparent and as such L3 flush checks are
relevant to all UDP flows merging in GRO. This patch uses the same logic
and code from tcp_gro_receive, terminating merge if flush is non zero.
Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.") Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Richard Gobert [Tue, 30 Apr 2024 14:35:54 +0000 (16:35 +0200)]
net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb
Commits a602456 ("udp: Add GRO functions to UDP socket") and 57c67ff ("udp:
additional GRO support") introduce incorrect usage of {ip,ipv6}_hdr in the
complete phase of gro. The functions always return skb->network_header,
which in the case of encapsulated packets at the gro complete phase, is
always set to the innermost L3 of the packet. That means that calling
{ip,ipv6}_hdr for skbs which completed the GRO receive phase (both in
gro_list and *_gro_complete) when parsing an encapsulated packet's _outer_
L3/L4 may return an unexpected value.
This incorrect usage leads to a bug in GRO's UDP socket lookup.
udp{4,6}_lib_lookup_skb functions use ip_hdr/ipv6_hdr respectively. These
*_hdr functions return network_header which will point to the innermost L3,
resulting in the wrong offset being used in __udp{4,6}_lib_lookup with
encapsulated packets.
This patch adds network_offset and inner_network_offset to napi_gro_cb, and
makes sure both are set correctly.
To fix the issue, network_offsets union is used inside napi_gro_cb, in
which both the outer and the inner network offsets are saved.
Reproduction example:
Endpoint configuration example (fou + local address bind)
# ip fou add port 6666 ipproto 4
# ip link add name tun1 type ipip remote 2.2.2.1 local 2.2.2.2 encap fou encap-dport 5555 encap-sport 6666 mode ipip
# ip link set tun1 up
# ip a add 1.1.1.2/24 dev tun1
Netperf TCP_STREAM result on net-next before patch is applied:
Fixes: a6024562ffd7 ("udp: Add GRO functions to UDP socket") Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Shigeru Yoshida [Tue, 30 Apr 2024 12:39:45 +0000 (21:39 +0900)]
ipv4: Fix uninit-value access in __ip_make_skb()
KMSAN reported uninit-value access in __ip_make_skb() [1]. __ip_make_skb()
tests HDRINCL to know if the skb has icmphdr. However, HDRINCL can cause a
race condition. If calling setsockopt(2) with IP_HDRINCL changes HDRINCL
while __ip_make_skb() is running, the function will access icmphdr in the
skb even if it is not included. This causes the issue reported by KMSAN.
Check FLOWI_FLAG_KNOWN_NH on fl4->flowi4_flags instead of testing HDRINCL
on the socket.
Also, fl4->fl4_icmp_type and fl4->fl4_icmp_code are not initialized. These
are union in struct flowi4 and are implicitly initialized by
flowi4_init_output(), but we should not rely on specific union layout.
Alexandra Winter [Tue, 30 Apr 2024 09:10:04 +0000 (11:10 +0200)]
s390/qeth: Fix kernel panic after setting hsuid
Symptom:
When the hsuid attribute is set for the first time on an IQD Layer3
device while the corresponding network interface is already UP,
the kernel will try to execute a napi function pointer that is NULL.
Analysis:
There is one napi structure per out_q: card->qdio.out_qs[i].napi
The napi.poll functions are set during qeth_open().
Since
commit 1cfef80d4c2b ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)")
qeth_set_offline()/qeth_set_online() no longer call dev_close()/
dev_open(). So if qeth_free_qdio_queues() cleared
card->qdio.out_qs[i].napi.poll while the network interface was UP and the
card was offline, they are not set again.
Reproduction:
chzdev -e $devno layer2=0
ip link set dev $network_interface up
echo 0 > /sys/bus/ccwgroup/devices/0.0.$devno/online
echo foo > /sys/bus/ccwgroup/devices/0.0.$devno/hsuid
echo 1 > /sys/bus/ccwgroup/devices/0.0.$devno/online
-> Crash (can be enforced e.g. by af_iucv connect(), ip link down/up, ...)
Note that a Completion Queue (CQ) is only enabled or disabled, when hsuid
is set for the first time or when it is removed.
Workarounds:
- Set hsuid before setting the device online for the first time
or
- Use chzdev -d $devno; chzdev $devno hsuid=xxx; chzdev -e $devno;
to set hsuid on an existing device. (this will remove and recreate the
network interface)
Fix:
There is no need to free the output queues when a completion queue is
added or removed.
card->qdio.state now indicates whether the inbound buffer pool and the
outbound queues are allocated.
card->qdio.c_q indicates whether a CQ is allocated.
Fixes: 1cfef80d4c2b ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240430091004.2265683-1-wintera@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ensure the inner IP header is part of skb's linear data before reading
its ECN bits. Otherwise we might read garbage.
One symptom is the system erroneously logging errors like
"vxlan: non-ECT from xxx.xxx.xxx.xxx with TOS=xxxx".
Similar bugs have been fixed in geneve, ip_tunnel and ip6_tunnel (see
commit 1ca1ba465e55 ("geneve: make sure to pull inner header in
geneve_rx()") for example). So let's reuse the same code structure for
consistency. Maybe we'll can add a common helper in the future.
Xin Long [Tue, 30 Apr 2024 14:03:38 +0000 (10:03 -0400)]
tipc: fix a possible memleak in tipc_buf_append
__skb_linearize() doesn't free the skb when it fails, so move
'*buf = NULL' after __skb_linearize(), so that the skb can be
freed on the err path.
Fixes: b7df21cf1b79 ("tipc: skb_linearize the head skb when reassembling msgs") Reported-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Link: https://lore.kernel.org/r/90710748c29a1521efac4f75ea01b3b7e61414cf.1714485818.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 30 Apr 2024 13:53:37 +0000 (15:53 +0200)]
tipc: fix UAF in error path
Sam Page (sam4k) working with Trend Micro Zero Day Initiative reported
a UAF in the tipc_buf_append() error path:
BUG: KASAN: slab-use-after-free in kfree_skb_list_reason+0x47e/0x4c0
linux/net/core/skbuff.c:1183
Read of size 8 at addr ffff88804d2a7c80 by task poc/8034
In the critical scenario, either the relevant skb is freed or its
ownership is transferred into a frag_lists. In both cases, the cleanup
code must not free it again: we need to clear the skb reference earlier.
Fixes: 1149557d64c9 ("tipc: eliminate unnecessary linearization of incoming buffers") Cc: stable@vger.kernel.org Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-23852 Acked-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/752f1ccf762223d109845365d07f55414058e5a3.1714484273.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The find connection logic of Transarc's Rx was modified in the mid-1990s
to support multi-homed servers which might send a response packet from
an address other than the destination address in the received packet.
The rules for accepting a packet by an Rx initiator (RX_CLIENT_CONNECTION)
were altered to permit acceptance of a packet from any address provided
that the port number was unchanged and all of the connection identifiers
matched (Epoch, CID, SecurityClass, ...).
This change applies the same rules to the Linux implementation which makes
it consistent with IBM AFS 3.6, Arla, OpenAFS and AuriStorFS.
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: Jeffrey Altman <jaltman@auristor.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Marc Dionne <marc.dionne@auristor.com> Link: https://lore.kernel.org/r/20240419163057.4141728-1-marc.dionne@auristor.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 1 May 2024 15:58:56 +0000 (08:58 -0700)]
Merge tag 'regulator-fix-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"There's a few simple driver specific fixes here, plus some core
cleanups from Matti which fix issues found with client drivers due to
the API being confusing.
The two fixes for the stubs provide more constructive behaviour with
!REGULATOR configurations, issues were noticed with some hwmon drivers
which would otherwise have needed confusing bodges in the users.
The irq_helpers fix to duplicate the provided name for the interrupt
controller was found because a driver got this wrong and it's again a
case where the core is the sensible place to put the fix"
* tag 'regulator-fix-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: change devm_regulator_get_enable_optional() stub to return Ok
regulator: change stubbed devm_regulator_get_enable to return Ok
regulator: vqmmc-ipq4019: fix module autoloading
regulator: qcom-refgen: fix module autoloading
regulator: mt6360: De-capitalize devicetree regulator subnodes
regulator: irq_helpers: duplicate IRQ name
Felix Fietkau [Sat, 27 Apr 2024 18:24:19 +0000 (20:24 +0200)]
net: core: reject skb_copy(_expand) for fraglist GSO skbs
SKB_GSO_FRAGLIST skbs must not be linearized, otherwise they become
invalid. Return NULL if such an skb is passed to skb_copy or
skb_copy_expand, in order to prevent a crash on a potential later
call to skb_gso_segment.
Fixes: 3a1296a38d0c ("net: Support GRO/GSO fraglist chaining.") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: David S. Miller <davem@davemloft.net>
Felix Fietkau [Sat, 27 Apr 2024 18:24:18 +0000 (20:24 +0200)]
net: bridge: fix multicast-to-unicast with fraglist GSO
Calling skb_copy on a SKB_GSO_FRAGLIST skb is not valid, since it returns
an invalid linearized skb. This code only needs to change the ethernet
header, so pskb_copy is the right function to call here.
Fixes: 6db6f0eae605 ("bridge: multicast to unicast") Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
When fallback to TCP happens early on a client socket, snd_nxt
is not yet initialized and any incoming ack will copy such value
into snd_una. If the mptcp worker (dumbly) tries mptcp-level
re-injection after such ack, that would unconditionally trigger a send
buffer cleanup using 'bad' snd_una values.
We could easily disable re-injection for fallback sockets, but such
dumb behavior already helped catching a few subtle issues and a very
low to zero impact in practice.
Instead address the issue always initializing snd_nxt (and write_seq,
for consistency) at connect time.
Fixes: 8fd738049ac3 ("mptcp: fallback in case of simultaneous connect") Cc: stable@vger.kernel.org Reported-by: Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/485 Tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240429-upstream-net-20240429-mptcp-snd_nxt-init-connect-v1-1-59ceac0a7dcb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
e1000e: change usleep_range to udelay in PHY mdic access
This is a partial revert of commit 6dbdd4de0362 ("e1000e: Workaround
for sporadic MDI error on Meteor Lake systems"). The referenced commit
used usleep_range inside the PHY access routines, which are sometimes
called from an atomic context. This can lead to a kernel panic in some
scenarios, such as cable disconnection and reconnection on vPro systems.
Solve this by changing the usleep_range calls back to udelay.
Fixes: 6dbdd4de0362 ("e1000e: Workaround for sporadic MDI error on Meteor Lake systems") Cc: stable@vger.kernel.org Reported-by: Jérôme Carretero <cJ@zougloub.eu> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218740 Closes: https://lore.kernel.org/lkml/a7eb665c74b5efb5140e6979759ed243072cb24a.camel@zougloub.eu/ Co-developed-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240429171040.1152516-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sebastian Andrzej Siewior [Mon, 29 Apr 2024 09:11:47 +0000 (11:11 +0200)]
cxgb4: Properly lock TX queue for the selftest.
The selftest for the driver sends a dummy packet and checks if the
packet will be received properly as it should be. The regular TX path
and the selftest can use the same network queue so locking is required
and was missing in the selftest path. This was addressed in the commit
cited below.
Unfortunately locking the TX queue requires BH to be disabled which is
not the case in selftest path which is invoked in process context.
Lockdep should be complaining about this.
Use __netif_tx_lock_bh() for TX queue locking.
Fixes: c650e04898072 ("cxgb4: Fix race between loopback and normal Tx path") Reported-by: "John B. Wyatt IV" <jwyatt@redhat.com> Closes: https://lore.kernel.org/all/Zic0ot5aGgR-V4Ks@thinkpad2021/ Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20240429091147.YWAaal4v@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yunsheng Lin [Sun, 28 Apr 2024 11:16:38 +0000 (19:16 +0800)]
rxrpc: Fix using alignmask being zero for __page_frag_alloc_align()
rxrpc_alloc_data_txbuf() may be called with data_align being
zero in none_alloc_txbuf() and rxkad_alloc_txbuf(), data_align
is supposed to be an order-based alignment value, but zero is
not a valid order-based alignment value, and '~(data_align - 1)'
doesn't result in a valid mask-based alignment value for
__page_frag_alloc_align().
Fix it by passing a valid order-based alignment value in
none_alloc_txbuf() and rxkad_alloc_txbuf().
Also use page_frag_alloc_align() expecting an order-based
alignment value in rxrpc_alloc_data_txbuf() to avoid doing the
alignment converting operation and to catch possible invalid
alignment value in the future. Remove the 'if (data_align)'
checking too, as it is always true for a valid order-based
alignment value.
Fixes: 6b2536462fd4 ("rxrpc: Fix use of changed alignment param to page_frag_alloc_align()") Fixes: 49489bb03a50 ("rxrpc: Do zerocopy using MSG_SPLICE_PAGES and page frags") CC: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Acked-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20240428111640.27306-1-linyunsheng@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fix from Paolo Bonzini:
"A pretty straightforward fix for a NULL pointer dereference, plus the
accompanying reproducer"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: Add test for uaccesses to non-existent vgic-v2 CPUIF
KVM: arm64: vgic-v2: Check for non-NULL vCPU in vgic_v2_parse_attr()
Merge tag 'platform-drivers-x86-v6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fix from Ilpo Järvinen:
- Add Grand Ridge to HPM CPU list
* tag 'platform-drivers-x86-v6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: ISST: Add Grand Ridge to HPM CPU list
Merge tag 'pinctrl-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix a double-free in the pinctrl_enable() errorpath
- Fix a refcount leak in pinctrl_dt_to_map()
- Fix selecting the GPIO pin control state and the UART3 pin config
group in the Intel Baytrail driver
- Fix readback of schmitt trigger status in the Mediatek Paris driver,
along with some semantic pin config issues in this driver
- Fix a pin suffix typo in the Meson A1 driver
- Fix an erroneous register offset in he Aspeed G6 driver
- Fix an inconsistent lock state and the interrupt type on resume in
the Renesas RZG2L driver
- Fix some minor confusion in the Renesas DT bindings
* tag 'pinctrl-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: renesas: rzg2l: Configure the interrupt type on resume
pinctrl: devicetree: fix refcount leak in pinctrl_dt_to_map()
pinctrl: baytrail: Add pinconf group for uart3
pinctrl: baytrail: Fix selecting gpio pinctrl state
pinctrl: mediatek: paris: Rework support for PIN_CONFIG_{INPUT,OUTPUT}_ENABLE
pinctrl: mediatek: paris: Fix PIN_CONFIG_INPUT_SCHMITT_ENABLE readback
pinctrl: core: delete incorrect free in pinctrl_enable()
pinctrl/meson: fix typo in PDM's pin name
pinctrl: pinctrl-aspeed-g6: Fix register offset for pinconf of GPIOR-T
pinctrl: renesas: rzg2l: Execute atomically the interrupt configuration
dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Allow 'input' and 'output-enable' properties
Merge tag 'wq-for-6.9-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
"Two doc update patches and the following three fixes:
- On single node systems, the default pool is used but the
node_nr_active for the default pool was set to min_active. This
effectively limited the max concurrency of unbound pools on single
node systems to 8 causing performance regressions on some
workloads. Fixed by setting the default pool's node_nr_active to
max_active.
- wq_update_node_max_active() could trigger divide-by-zero if the
intersection between the allowed CPUs for an unbound workqueue and
online CPUs becomes empty.
- When kick_pool() was trying to repatriate a worker to a CPU in its
pod by setting task->wake_cpu, it didn't consider whether the CPU
being selected is online or not which obviously can lead to
subobtimal behaviors. On s390, this triggered a crash in arch code.
The workqueue patch removes the gross misbehavior but doesn't fix
the crash completely as there's a race window in which CPUs can go
down after wake_cpu is set. Need to decide whether the fix should
be on the core or arch side"
* tag 'wq-for-6.9-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Fix divide error in wq_update_node_max_active()
workqueue: The default node_nr_active should have its max set to max_active
workqueue: Fix selection of wake_cpu in kick_pool()
docs/zh_CN: core-api: Update translation of workqueue.rst to 6.9-rc1
Documentation/core-api: Update events_freezable_power references.
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"Minor core fix to prevent the sd driver printing the stream count
every time we rescan and instead print only if it's changed"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Only print updates to permanent stream count
Merge tag 'nfs-for-6.9-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
- Fix an Oops in xs_tcp_tls_setup_socket
- Fix an Oops due to missing error handling in nfs_net_init()
* tag 'nfs-for-6.9-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
nfs: Handle error of rpc_proc_register() in nfs_net_init().
SUNRPC: add a missing rpc_stat for TCP TLS
Merge tag 'erofs-for-6.9-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"Three fixes related to EROFS fscache mode. The most important two
patches fix calling kill_block_super() in bdev-based mode instead of
kill_anon_super(). The remaining patch is an informative one.
Summary:
- Better error message when prepare_ondemand_read failed
- Fix unmount of bdev-based mode if CONFIG_EROFS_FS_ONDEMAND is on"
* tag 'erofs-for-6.9-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: reliably distinguish block based and fscache mode
erofs: get rid of erofs_fs_context
erofs: modify the error message when prepare_ondemand_read failed
David S. Miller [Mon, 29 Apr 2024 12:39:15 +0000 (13:39 +0100)]
Merge branch 'vxlan-stats'
Guillaume Nault says:
====================
vxlan: Fix vxlan counters.
Like most virtual devices, vxlan needs special care when updating its
netdevice counters. This is done in patch 1. Patch 2 just adds a
missing VNI counter update (found while working on patch 1).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
vxlan: Add missing VNI filter counter update in arp_reduce().
VXLAN stores per-VNI statistics using vxlan_vnifilter_count().
These statistics were not updated when arp_reduce() failed its
pskb_may_pull() call.
Use vxlan_vnifilter_count() to update the VNI counter when that
happens.
Fixes: 4095e0e1328a ("drivers: vxlan: vnifilter: per vni stats") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
VXLAN devices update their stats locklessly. Therefore these counters
should either be stored in per-cpu data structures or the updates
should be done using atomic increments.
Since the net_device_core_stats infrastructure is already used in
vxlan_rcv(), use it for the other rx_dropped and tx_dropped counter
updates. Update the other counters atomically using DEV_STATS_INC().
Fixes: d342894c5d2f ("vxlan: virtual extensible lan") Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This series fixes the qede driver, so that
qede_parse_flow_attr() and it's subfunctions
doesn't get their error codes overruled
(ie. turning -EOPNOTSUPP into -EINVAL).
---
I have two more patches along the same lines,
but they are not yet causing any issues,
so I have them destined for net-next.
(those are for qede_flow_spec_validate_unused()
and qede_flow_parse_ports().)
After that I have a series for converting to
extack + the final one for validating control
flags.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When calling qede_parse_actions() then the
return code was only used for a non-zero check,
and then -EINVAL was returned.
qede_parse_actions() can currently fail with:
* -EINVAL
* -EOPNOTSUPP
This patch changes the code to use the actual
return code, not just return -EINVAL.
The blaimed commit broke the implicit assumption
that only -EINVAL would ever be returned.
Only compile tested.
Fixes: 319a1d19471e ("flow_offload: check for basic action hw stats type") Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
net: qede: use return from qede_parse_flow_attr() for flow_spec
In qede_flow_spec_to_rule(), when calling
qede_parse_flow_attr() then the return code
was only used for a non-zero check, and then
-EINVAL was returned.
qede_parse_flow_attr() can currently fail with:
* -EINVAL
* -EOPNOTSUPP
* -EPROTONOSUPPORT
This patch changes the code to use the actual
return code, not just return -EINVAL.
The blaimed commit introduced qede_flow_spec_to_rule(),
and this call to qede_parse_flow_attr(), it looks
like it just duplicated how it was already used.
Only compile tested.
Fixes: 37c5d3efd7f8 ("qede: use ethtool_rx_flow_rule() to remove duplicated parser code") Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
net: qede: use return from qede_parse_flow_attr() for flower
In qede_add_tc_flower_fltr(), when calling
qede_parse_flow_attr() then the return code
was only used for a non-zero check, and then
-EINVAL was returned.
qede_parse_flow_attr() can currently fail with:
* -EINVAL
* -EOPNOTSUPP
* -EPROTONOSUPPORT
This patch changes the code to use the actual
return code, not just return -EINVAL.
The blaimed commit introduced these functions.
Only compile tested.
Fixes: 2ce9c93eaca6 ("qede: Ingress tc flower offload (drop action) support.") Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
net: qede: sanitize 'rc' in qede_add_tc_flower_fltr()
Explicitly set 'rc' (return code), before jumping to the
unlock and return path.
By not having any code depend on that 'rc' remains at
it's initial value of -EINVAL, then we can re-use 'rc' for
the return code of function calls in subsequent patches.
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
A spelling error was found in the comment section of
include/uapi/linux/xfrm.h. Since this header file is copied to many
userspace programs and undergoes Debian spellcheck, it's preferable to
fix it in upstream rather than downstream having exceptions.
The UMAC_CMD register is written from different execution
contexts and has insufficient synchronization protections to
prevent possible corruption. Of particular concern are the
acceses from the phy_device delayed work context used by the
adjust_link call and the BH context that may be used by the
ndo_set_rx_mode call.
A spinlock is added to the driver to protect contended register
accesses (i.e. reg_lock) and it is used to synchronize accesses
to UMAC_CMD.
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Cc: stable@vger.kernel.org Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: bcmgenet: synchronize use of bcmgenet_set_rx_mode()
The ndo_set_rx_mode function is synchronized with the
netif_addr_lock spinlock and BHs disabled. Since this
function is also invoked directly from the driver the
same synchronization should be applied.
Fixes: 72f96347628e ("net: bcmgenet: set Rx mode before starting netif") Cc: stable@vger.kernel.org Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The EXT_RGMII_OOB_CTRL register can be written from different
contexts. It is predominantly written from the adjust_link
handler which is synchronized by the phydev->lock, but can
also be written from a different context when configuring the
mii in bcmgenet_mii_config().
The chances of contention are quite low, but it is conceivable
that adjust_link could occur during resume when WoL is enabled
so use the phydev->lock synchronizer in bcmgenet_mii_config()
to be sure.
Fixes: afe3f907d20f ("net: bcmgenet: power on MII block for all MII modes") Cc: stable@vger.kernel.org Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'sched-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix EEVDF corner cases
- Fix two nohz_full= related bugs that can cause boot crashes
and warnings
* tag 'sched-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/isolation: Fix boot crash when maxcpus < first housekeeping CPU
sched/isolation: Prevent boot crash when the boot CPU is nohz_full
sched/eevdf: Prevent vlag from going out of bounds in reweight_eevdf()
sched/eevdf: Fix miscalculation in reweight_entity() when se is not curr
sched/eevdf: Always update V if se->on_rq when reweighting
Merge tag 'x86-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Make the CPU_MITIGATIONS=n interaction with conflicting
mitigation-enabling boot parameters a bit saner.
- Re-enable CPU mitigations by default on non-x86
- Fix TDX shared bit propagation on mprotect()
- Fix potential show_regs() system hang when PKE initialization
is not fully finished yet.
- Add the 0x10-0x1f model IDs to the Zen5 range
- Harden #VC instruction emulation some more
* tag 'x86-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Ignore "mitigations" kernel parameter if CPU_MITIGATIONS=n
cpu: Re-enable CPU mitigations by default for !X86 architectures
x86/tdx: Preserve shared bit on mprotect()
x86/cpu: Fix check for RDPKRU in __show_regs()
x86/CPU/AMD: Add models 0x10-0x1f to the Zen5 range
x86/sev: Check for MWAITX and MONITORX opcodes in the #VC handler
Christian Brauner [Fri, 19 Apr 2024 12:36:11 +0000 (20:36 +0800)]
erofs: reliably distinguish block based and fscache mode
When erofs_kill_sb() is called in block dev based mode, s_bdev may not
have been initialised yet, and if CONFIG_EROFS_FS_ONDEMAND is enabled,
it will be mistaken for fscache mode, and then attempt to free an anon_dev
that has never been allocated, triggering the following warning:
============================================
ida_free called for id=0 which is not allocated.
WARNING: CPU: 14 PID: 926 at lib/idr.c:525 ida_free+0x134/0x140
Modules linked in:
CPU: 14 PID: 926 Comm: mount Not tainted 6.9.0-rc3-dirty #630
RIP: 0010:ida_free+0x134/0x140
Call Trace:
<TASK>
erofs_kill_sb+0x81/0x90
deactivate_locked_super+0x35/0x80
get_tree_bdev+0x136/0x1e0
vfs_get_tree+0x2c/0xf0
do_new_mount+0x190/0x2f0
[...]
============================================
Now when erofs_kill_sb() is called, erofs_sb_info must have been
initialised, so use sbi->fsid to distinguish between the two modes.
projects / users / dwmw2 / linux.git / log