Use the Maple Tree iterator instead. This is too complicated for the VMA
iterator to handle, so let's open-code it for now. If this turns out to
be a common pattern, we can migrate it to common code.
Use the VMA iterator instead. This requires a little restructuring of the
surrounding code to hoist the mm to the caller. That turns
cxl_prefault_one() into a trivial function, so call cxl_fault_segment()
directly.
Use the VMA iterator instead. Since VMA can no longer be NULL in the
loop, then deal with out-of-memory outside the loop. This means a
slightly longer run time in the failure case (-ENOMEM) - it will run to
the end of the VMAs before erroring instead of in the middle of the loop.
mm/mmap: change do_brk_munmap() to use do_mas_align_munmap()
do_brk_munmap() has already aligned the address and has a maple tree state
to be used. Use the new do_mas_align_munmap() to avoid unnecessary
alignment and error checks.
Remove __do_munmap() in favour of do_munmap(), do_mas_munmap(), and
do_mas_align_munmap().
do_munmap() is a wrapper to create a maple state for any callers that have
not been converted to the maple tree.
do_mas_munmap() takes a maple state to mumap a range. This is just a
small function which checks for error conditions and aligns the end of the
range.
do_mas_align_munmap() uses the aligned range to mumap a range.
do_mas_align_munmap() starts with the first VMA in the range, then finds
the last VMA in the range. Both start and end are split if necessary.
Then the VMAs are removed from the linked list and the mm mlock count is
updated at the same time. Followed by a single tree operation of
overwriting the area in with a NULL. Finally, the detached list is
unmapped and freed.
By reorganizing the munmap calls as outlined, it is now possible to avoid
extra work of aligning pre-aligned callers which are known to be safe,
avoid extra VMA lookups or tree walks for modifications.
detach_vmas_to_be_unmapped() is no longer used, so drop this code.
vm_brk_flags() can just call the do_mas_munmap() as it checks for
intersecting VMAs directly.
By using the maple tree and the maple tree state, the vmacache is no
longer beneficial and is complicating the VMA code. Remove the vmacache
to reduce the work in keeping it up to date and code complexity.
mm/mmap: use advanced maple tree API for mmap_region()
Changing mmap_region() to use the maple tree state and the advanced maple
tree interface allows for a lot less tree walking.
This change removes the last caller of munmap_vma_range(), so drop this
unused function.
Add vma_expand() to expand a VMA if possible by doing the necessary
hugepage check, uprobe_munmap of files, dcache flush, modifications then
undoing the detaches, etc.
mm/mmap: change do_brk_flags() to expand existing VMA and add do_brk_munmap()
Avoid allocating a new VMA when it a vma modification can occur. When a
brk() can expand or contract a VMA, then the single store operation will
only modify one index of the maple tree instead of causing a node to split
or coalesce. This avoids unnecessary allocations/frees of maple tree
nodes and VMAs.
Move some limit & flag verifications out of the do_brk_flags() function to
use only relevant checks in the code path of bkr() and vm_brk_flags().
Set the vma to check if it can expand in vm_brk_flags() if extra criteria
are met.
Drop userfaultfd from do_brk_flags() path and only use it in
vm_brk_flags() path since that is the only place a munmap will happen.
Add a wraper for munmap for the brk case called do_brk_munmap().
mm/khugepaged: optimize collapse_pte_mapped_thp() by using vma_lookup()
vma_lookup() will walk the vma tree once and not continue to look for the
next vma. Since the exact vma is checked below, this is a more optimal
way of searching.
Use vma_lookup() to walk the tree to the start value requested. If the
vma at the start does not match, then the answer is NULL and there is no
need to look at the next vma the way that find_vma() would.
vma_lookup() walks the VMA tree for a specific value, find_vma() will
search the tree after walking to a specific value. It is more efficient
to only walk to the requested value since privcmd_ioctl_mmap() will exit
the loop if vm_start != msg->va.
mmap: change zeroing of maple tree in __vma_adjust()
Only write to the maple tree if we are not inserting or the insert isn't
going to overwrite the area to clear. This avoids spanning writes and
node coealescing when unnecessary.
The change requires a custom search for the linked list addition to find
the correct VMA for the prev link.
damon: convert __damon_va_three_regions to use the VMA iterator
This rather specialised walk can use the VMA iterator. If this proves to
be too slow, we can write a custom routine to find the two largest gaps,
but it will be somewhat complicated, so let's see if we need it first.
Update the kunit test case to use the maple tree. This also fixes an
issue with the kunit testcase not adding the last VMA to the list.
Link: https://lkml.kernel.org/r/20220504011215.661968-1-Liam.Howlett@oracle.com Link: https://lkml.kernel.org/r/20220621204632.3370049-16-Liam.Howlett@oracle.com Link: https://lkml.kernel.org/r/20220720021727.17018-16-Liam.Howlett@oracle.com Fixes: 17ccae8bb5c9 (mm/damon: add kunit tests) Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: SeongJae Park <sj@kernel.org> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Howells <dhowells@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Hulk Robot <hulkci@huawei.com> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kernel/fork: use maple tree for dup_mmap() during forking
The maple tree was already tracking VMAs in this function by an earlier
commit, but the rbtree iterator was being used to iterate the list.
Change the iterator to use a maple tree native iterator and switch to the
maple tree advanced API to avoid multiple walks of the tree during insert
operations. Unexport the now-unused vma_store() function.
For performance reasons we bulk allocate the maple tree nodes. The node
calculations are done internally to the tree and use the VMA count and
assume the worst-case node requirements. The VM_DONT_COPY flag does not
allow for the most efficient copy method of the tree and so a bulk loading
algorithm is used.
mm/mmap: use maple tree for unmapped_area{_topdown}
The maple tree code was added to find the unmapped area in a previous
commit and was checked against what the rbtree returned, but the actual
result was never used. Start using the maple tree implementation and
remove the rbtree code.
Add kernel documentation comment for these functions.
mm/mmap: use the maple tree for find_vma_prev() instead of the rbtree
Use the maple tree's advanced API and a maple state to walk the tree for
the entry at the address of the next vma, then use the maple state to walk
back one entry to find the previous entry.
This thin layer of abstraction over the maple tree state is for iterating
over VMAs. You can go forwards, go backwards or ask where the iterator
is. Rename the existing vma_next() to __vma_next() -- it will be removed
by the end of this series.
Start tracking the VMAs with the new maple tree structure in parallel with
the rb_tree. Add debug and trace events for maple tree operations and
duplicate the rb_tree that is created on forks into the maple tree.
The maple tree is added to the mm_struct including the mm_init struct,
added support in required mm/mmap functions, added tracking in kernel/fork
for process forking, and used to find the unmapped_area and checked
against what the rbtree finds.
This also moves the mmap_lock() in exit_mmap() since the oom reaper call
does walk the VMAs. Otherwise lockdep will be unhappy if oom happens.
When splitting a vma fails due to allocations of the maple tree nodes,
the error path in __split_vma() calls new->vm_ops->close(new). The page
accounting for hugetlb is actually in the close() operation, so it
accounts for the removal of 1/2 of the VMA which was not adjusted. This
results in a negative exit value. To avoid the negative charge, set
vm_start = vm_end and vm_pgoff = 0.
There is also a potential accounting issue in special mappings from
insert_vm_struct() failing to allocate, so reverse the charge there in
the failure scenario.
radix tree test suite: add allocation counts and size to kmem_cache
Add functions to get the number of allocations, and total allocations from
a kmem_cache. Also add a function to get the allocated size and a way to
zero the total allocations.
radix tree test suite: add kmem_cache_set_non_kernel()
kmem_cache_set_non_kernel() is a mechanism to allow a certain number of
kmem_cache_alloc requests to succeed even when GFP_KERNEL is not set in
the flags. This functionality allows for testing different paths though
the code.
The maple tree is an RCU-safe range based B-tree designed to use modern
processor cache efficiently. There are a number of places in the kernel
that a non-overlapping range-based tree would be beneficial, especially
one with a simple interface. If you use an rbtree with other data
structures to improve performance or an interval tree to track
non-overlapping ranges, then this is for you.
The tree has a branching factor of 10 for non-leaf nodes and 16 for leaf
nodes. With the increased branching factor, it is significantly shorter
than the rbtree so it has fewer cache misses. The removal of the linked
list between subsequent entries also reduces the cache misses and the need
to pull in the previous and next VMA during many tree alterations.
The first user that is covered in this patch set is the vm_area_struct,
where three data structures are replaced by the maple tree: the augmented
rbtree, the vma cache, and the linked list of VMAs in the mm_struct. The
long term goal is to reduce or remove the mmap_lock contention.
The plan is to get to the point where we use the maple tree in RCU mode.
Readers will not block for writers. A single write operation will be
allowed at a time. A reader re-walks if stale data is encountered. VMAs
would be RCU enabled and this mode would be entered once multiple tasks
are using the mm_struct.
Davidlor said
: Yes I like the maple tree, and at this stage I don't think we can ask for
: more from this series wrt the MM - albeit there seems to still be some
: folks reporting breakage. Fundamentally I see Liam's work to (re)move
: complexity out of the MM (not to say that the actual maple tree is not
: complex) by consolidating the three complimentary data structures very
: much worth it considering performance does not take a hit. This was very
: much a turn off with the range locking approach, which worst case scenario
: incurred in prohibitive overhead. Also as Liam and Matthew have
: mentioned, RCU opens up a lot of nice performance opportunities, and in
: addition academia[1] has shown outstanding scalability of address spaces
: with the foundation of replacing the locked rbtree with RCU aware trees.
A similar work has been discovered in the academic press
Sheer coincidence. We designed our tree with the intention of solving the
hardest problem first. Upon settling on a b-tree variant and a rough
outline, we researched ranged based b-trees and RCU b-trees and did find
that article. So it was nice to find reassurances that we were on the
right path, but our design choice of using ranges made that paper unusable
for us.
This patch (of 69):
The maple tree is an RCU-safe range based B-tree designed to use modern
processor cache efficiently. There are a number of places in the kernel
that a non-overlapping range-based tree would be beneficial, especially
one with a simple interface. If you use an rbtree with other data
structures to improve performance or an interval tree to track
non-overlapping ranges, then this is for you.
The tree has a branching factor of 10 for non-leaf nodes and 16 for leaf
nodes. With the increased branching factor, it is significantly shorter
than the rbtree so it has fewer cache misses. The removal of the linked
list between subsequent entries also reduces the cache misses and the need
to pull in the previous and next VMA during many tree alterations.
The first user that is covered in this patch set is the vm_area_struct,
where three data structures are replaced by the maple tree: the augmented
rbtree, the vma cache, and the linked list of VMAs in the mm_struct. The
long term goal is to reduce or remove the mmap_lock contention.
The plan is to get to the point where we use the maple tree in RCU mode.
Readers will not block for writers. A single write operation will be
allowed at a time. A reader re-walks if stale data is encountered. VMAs
would be RCU enabled and this mode would be entered once multiple tasks
are using the mm_struct.
Yury Norov [Fri, 12 Aug 2022 05:34:25 +0000 (22:34 -0700)]
radix-tree: replace gfp.h inclusion with gfp_types.h
Radix tree header includes gfp.h for __GFP_BITS_SHIFT only. Now we
have gfp_types.h for this.
Fixes powerpc allmodconfig build:
In file included from include/linux/nodemask.h:97,
from include/linux/mmzone.h:17,
from include/linux/gfp.h:7,
from include/linux/radix-tree.h:12,
from include/linux/idr.h:15,
from include/linux/kernfs.h:12,
from include/linux/sysfs.h:16,
from include/linux/kobject.h:20,
from include/linux/pci.h:35,
from arch/powerpc/kernel/prom_init.c:24:
include/linux/random.h: In function 'add_latent_entropy':
>> include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'?
25 | add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy));
| ^~~~~~~~~~~~~~
| add_latent_entropy
include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in
Reported-by: kernel test robot <lkp@intel.com> CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com> CC: Andrew Morton <akpm@linux-foundation.org> CC: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Yury Norov <yury.norov@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 14 Aug 2022 20:03:53 +0000 (13:03 -0700)]
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs lseek fix from Al Viro:
"Fix proc_reg_llseek() breakage. Always had been possible if somebody
left NULL ->proc_lseek, became a practical issue now"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
take care to handle NULL ->proc_lseek()
Linus Torvalds [Sun, 14 Aug 2022 16:22:11 +0000 (09:22 -0700)]
Merge tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tool updates from Arnaldo Carvalho de Melo:
- 'perf c2c' now supports ARM64, adjust its output to cope with
differences with what is in x86_64. Now go find false sharing on
ARM64 (at least Neoverse) as well!
- Refactor the JSON processing, making the output more compact and thus
reducing the size of the resulting perf binary
- Improvements for 'perf offcpu' profiling, including tracking child
processes
- Update Intel JSON metrics and events files for broadwellde,
broadwellx, cascadelakex, haswellx, icelakex, ivytown, jaketown,
knightslanding, sapphirerapids, skylakex and snowridgex
- Add 'perf stat' JSON output and a 'perf test' entry for it
- Ignore memfd and anonymous mmap events if jitdump present
- Fix an error handling path in 'parse_perf_probe_command()'
- Fixes for the guest Intel PT tracing patchkit in the 1st batch of
this merge window
- Print debuginfod queries if -v option is used, to explain delays in
processing when debuginfo servers are enabled to fetch DSOs with
richer symbol tables
- Improve error message for 'perf record -p not_existing_pid'
- Fix openssl and libbpf feature detection
- Add PMU pai_crypto event description for IBM z16 on 'perf list'
- Fix typos and duplicated words on comments in various places
* tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (81 commits)
perf test: Refactor shell tests allowing subdirs
perf vendor events: Update events for snowridgex
perf vendor events: Update events and metrics for skylakex
perf vendor events: Update metrics for sapphirerapids
perf vendor events: Update events for knightslanding
perf vendor events: Update metrics for jaketown
perf vendor events: Update metrics for ivytown
perf vendor events: Update events and metrics for icelakex
perf vendor events: Update events and metrics for haswellx
perf vendor events: Update events and metrics for cascadelakex
perf vendor events: Update events and metrics for broadwellx
perf vendor events: Update metrics for broadwellde
perf jevents: Fold strings optimization
perf jevents: Compress the pmu_events_table
perf metrics: Copy entire pmu_event in find metric
perf pmu-events: Hide the pmu_events
perf pmu-events: Don't assume pmu_event is an array
perf pmu-events: Move test events/metrics to JSON
perf test: Use full metric resolution
perf pmu-events: Hide pmu_events_map
...
Linus Torvalds [Sun, 14 Aug 2022 15:48:13 +0000 (08:48 -0700)]
Merge tag 'powerpc-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Ensure we never emit lwarx with EH=1 on 32-bit, because some 32-bit
CPUs trap on it rather than ignoring it as they should.
- Fix ftrace when building with clang, which was broken by some
refactoring.
- A couple of other minor fixes.
Thanks to Christophe Leroy, Naveen N. Rao, Nick Desaulniers, Ondrej
Mosnacek, Pali Rohár, Russell Currey, and Segher Boessenkool.
* tag 'powerpc-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/kexec: Fix build failure from uninitialised variable
powerpc/ppc-opcode: Fix PPC_RAW_TW()
powerpc64/ftrace: Fix ftrace for clang builds
powerpc: Make eh value more explicit when using lwarx
powerpc: Don't hide eh field of lwarx behind a macro
powerpc: Fix eh field when calling lwarx on PPC32
Linus Torvalds [Sun, 14 Aug 2022 00:31:18 +0000 (17:31 -0700)]
Merge tag '5.20-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more cifs updates from Steve French:
- two fixes for stable, one for a lock length miscalculation, and
another fixes a lease break timeout bug
- improvement to handle leases, allows the close timeout to be
configured more safely
- five restructuring/cleanup patches
* tag '5.20-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Do not access tcon->cfids->cfid directly from is_path_accessible
cifs: Add constructor/destructors for tcon->cfid
SMB3: fix lease break timeout when multiple deferred close handles for the same file.
smb3: allow deferred close timeout to be configurable
cifs: Do not use tcon->cfid directly, use the cfid we get from open_cached_dir
cifs: Move cached-dir functions into a separate file
cifs: Remove {cifs,nfs}_fscache_release_page()
cifs: fix lock length calculation
David Howells [Wed, 10 Aug 2022 17:52:47 +0000 (18:52 +0100)]
afs: Enable multipage folio support
Enable multipage folio support for the afs filesystem.
Support has already been implemented in netfslib, fscache and cachefiles
and in most of afs, but I've waited for Matthew Wilcox's latest folio
changes.
Note that it does require a change to afs_write_begin() to return the
correct subpage. This is a "temporary" change as we're working on
getting rid of the need for ->write_begin() and ->write_end()
completely, at least as far as network filesystems are concerned - but
it doesn't prevent afs from making use of the capability.
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: kafs-testing@auristor.com Cc: Marc Dionne <marc.dionne@auristor.com> Cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/lkml/2274528.1645833226@warthog.procyon.org.uk/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 13 Aug 2022 21:38:22 +0000 (14:38 -0700)]
Merge tag 'timers-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Misc timer fixes:
- fix a potential use-after-free bug in posix timers
- correct a prototype
- address a build warning"
* tag 'timers-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Cleanup CPU timers before freeing them during exec
time: Correct the prototype of ns_to_kernel_old_timeval and ns_to_timespec64
posix-timers: Make do_clock_gettime() static
Linus Torvalds [Sat, 13 Aug 2022 21:24:12 +0000 (14:24 -0700)]
Merge tag 'x86-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix the 'IBPB mitigated RETBleed' mode of operation on AMD CPUs (not
turned on by default), which also need STIBP enabled (if available) to
be '100% safe' on even the shortest speculation windows"
* tag 'x86-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Enable STIBP for IBPB mitigated RETBleed
Linus Torvalds [Sat, 13 Aug 2022 21:00:45 +0000 (14:00 -0700)]
Merge tag 'ntb-5.20' of https://github.com/jonmason/ntb
Pull NTB updates from Jon Mason:
"Non-Transparent Bridge updates.
Fix of heap data and clang warnings, support for a new Intel NTB
device, and NTB EndPoint Function (EPF) support and the various fixes
for that"
* tag 'ntb-5.20' of https://github.com/jonmason/ntb:
MAINTAINERS: add PCI Endpoint NTB drivers to NTB files
NTB: EPF: Tidy up some bounds checks
NTB: EPF: Fix error code in epf_ntb_bind()
PCI: endpoint: pci-epf-vntb: reduce several globals to statics
PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init()
PCI: endpoint: Fix Kconfig dependency
NTB: EPF: set pointer addr to null using NULL rather than 0
Documentation: PCI: extend subheading underline for "lspci output" section
Documentation: PCI: Use code-block block for scratchpad registers diagram
Documentation: PCI: Add specification for the PCI vNTB function device
PCI: endpoint: Support NTB transfer between RC and EP
NTB: epf: Allow more flexibility in the memory BAR map method
PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address
ntb: intel: add GNR support for Intel PCIe gen5 NTB
NTB: ntb_tool: uninitialized heap data in tool_fn_write()
ntb: idt: fix clang -Wformat warnings
Linus Torvalds [Sat, 13 Aug 2022 20:50:11 +0000 (13:50 -0700)]
Merge tag 'xfs-5.20-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull more xfs updates from Darrick Wong:
"There's not a lot this time around, just the usual bug fixes and
corrections for missing error returns.
- Return error codes from block device flushes to userspace
- Fix a deadlock between reclaim and mount time quotacheck
- Fix an unnecessary ENOSPC return when doing COW on a filesystem
with severe free space fragmentation
- Fix a miscalculation in the transaction reservation computations
for file removal operations"
* tag 'xfs-5.20-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix inode reservation space for removing transaction
xfs: Fix false ENOSPC when performing direct write on a delalloc extent in cow fork
xfs: fix intermittent hang during quotacheck
xfs: check return codes when flushing block devices
Linus Torvalds [Sat, 13 Aug 2022 20:41:48 +0000 (13:41 -0700)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes and trivial updates.
The major new core update is a change to the way device, target and
host reference counting is done to try to make it more robust (this
change has soaked for a while to try to winkle out any bugs)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: pm8001: Fix typo 'the the' in comment
scsi: megaraid_sas: Remove redundant variable cmd_type
scsi: FlashPoint: Remove redundant variable bm_int_st
scsi: zfcp: Fix missing auto port scan and thus missing target ports
scsi: core: Call blk_mq_free_tag_set() earlier
scsi: core: Simplify LLD module reference counting
scsi: core: Make sure that hosts outlive targets
scsi: core: Make sure that targets outlive devices
scsi: ufs: ufs-pci: Correct check for RESET DSM
scsi: target: core: De-RCU of se_lun and se_lun acl
scsi: target: core: Fix race during ACL removal
scsi: ufs: core: Correct ufshcd_shutdown() flow
scsi: ufs: core: Increase the maximum data buffer size
scsi: lpfc: Check the return value of alloc_workqueue()
Linus Torvalds [Sat, 13 Aug 2022 20:37:36 +0000 (13:37 -0700)]
Merge tag 'block-6.0-2022-08-12' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request
- print nvme connect Linux error codes properly (Amit Engel)
- fix the fc_appid_store return value (Christoph Hellwig)
- fix a typo in an error message (Christophe JAILLET)
- add another non-unique identifier quirk (Dennis P. Kliem)
- check if the queue is allocated before stopping it in nvme-tcp
(Maurizio Lombardi)
- restart admin queue if the caller needs to restart queue in
nvme-fc (Ming Lei)
- use kmemdup instead of kmalloc + memcpy in nvme-auth (Zhang
Xiaoxu)
- __alloc_disk_node() error handling fix (Rafael)
* tag 'block-6.0-2022-08-12' of git://git.kernel.dk/linux-block:
block: Do not call blk_put_queue() if gendisk allocation fails
nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S70
nvme-tcp: check if the queue is allocated before stopping it
nvme-fabrics: Fix a typo in an error message
nvme-fabrics: parse nvme connect Linux error codes
nvmet-auth: use kmemdup instead of kmalloc + memcpy
nvme-fc: fix the fc_appid_store return value
nvme-fc: restart admin queue if the caller needs to restart queue
Linus Torvalds [Sat, 13 Aug 2022 20:28:54 +0000 (13:28 -0700)]
Merge tag 'io_uring-6.0-2022-08-13' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Regression fix for this merge window, fixing a wrong order of
arguments for io_req_set_res() for passthru (Dylan)
- Fix for the audit code leaking context memory (Peilin)
- Ensure that provided buffers are memcg accounted (Pavel)
- Correctly handle short zero-copy sends (Pavel)
- Sparse warning fixes for the recvmsg multishot command (Dylan)
- Error handling fix for passthru (Anuj)
- Remove randomization of struct kiocb fields, to avoid it growing in
size if re-arranged in such a fashion that it grows more holes or
padding (Keith, Linus)
- Small series improving type safety of the sqe fields (Stefan)
* tag 'io_uring-6.0-2022-08-13' of git://git.kernel.dk/linux-block:
io_uring: add missing BUILD_BUG_ON() checks for new io_uring_sqe fields
io_uring: make io_kiocb_to_cmd() typesafe
fs: don't randomize struct kiocb fields
io_uring: consistently make use of io_notif_to_data()
io_uring: fix error handling for io_uring_cmd
io_uring: fix io_recvmsg_prep_multishot sparse warnings
io_uring/net: send retry for zerocopy
io_uring: mem-account pbuf buckets
audit, io_uring, io-wq: Fix memory leak in io_sq_thread() and io_wqe_worker()
io_uring: pass correct parameters to io_req_set_res
Carsten Haitzler [Fri, 12 Aug 2022 12:16:28 +0000 (13:16 +0100)]
perf test: Refactor shell tests allowing subdirs
This is a prelude to adding more tests to shell tests and in order to
support putting those tests into subdirectories, I need to change the
test code that scans/finds and runs them.
To support subdirs I have to recurse so it's time to refactor the code
to allow this and centralize the shell script finding into one location
and only one single scan that builds a list of all the found tests in
memory instead of it being duplicated in 3 places.
This code also optimizes things like knowing the max width of desciption
strings (as we can do that while we scan instead of a whole new pass of
opening files).
It also more cleanly filters scripts to see only *.sh files thus
skipping random other files in directories like *~ backup files, other
random junk/data files that may appear and the scripts must be
executable to make the cut (this ensures the script lib dir is not seen
as scripts to run).
This avoids perf test running previous older versions of test scripts
that are editor backup files as well as skipping perf.data files that
may appear and so on.
Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com> Tested-by: Leo Yan <leo.yan@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: coresight@lists.linaro.org Link: https://lore.kernel.org/r/20220812121641.336465-2-carsten.haitzler@foss.arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Aug 2022 23:09:49 +0000 (16:09 -0700)]
perf jevents: Fold strings optimization
If a shorter string ends a longer string then the shorter string may
reuse the longer string at an offset. For example, on x86 the event
arith.cycles_div_busy and cycles_div_busy can be folded, even though
they have difference names the strings are identical after 6
characters. cycles_div_busy can reuse the arith.cycles_div_busy string
at an offset of 6.
In pmu-events.c this looks like the following where the 'also:' lists
folded strings:
/* offset=177541 */ "arith.cycles_div_busy\000\000pipeline\000Cycles the divider is busy\000\000\000event=0x14,period=2000000,umask=0x1\000\000\000\000\000\000\000\000\000" /* also: cycles_div_busy\000\000pipeline\000Cycles the divider is busy\000\000\000event=0x14,period=2000000,umask=0x1\000\000\000\000\000\000\000\000\000 */
As jevents.py combines multiple strings for an event into a larger
string, the amount of folding is minimal as all parts of the event must
align. Other organizations can benefit more from folding, but lose space
by say recording more offsets.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220812230949.683239-15-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Aug 2022 23:09:48 +0000 (16:09 -0700)]
perf jevents: Compress the pmu_events_table
The pmu_events array requires 15 pointers per entry which in position
independent code need relocating. Change the array to be an array of
offsets within a big C string. Only the offset of the first variable is
required, subsequent variables are stored in order after the \0
terminator (requiring a byte per variable rather than 4 bytes per
offset).
The file size savings are:
no jevents - the same 19,788,464bytes
x86 jevents - ~16.7% file size saving 23,744,288bytes vs 28,502,632bytes
all jevents - ~19.5% file size saving 24,469,056bytes vs 30,379,920bytes
default build options plus NO_LIBBFD=1.
For example, the x86 build savings come from .rela.dyn and
.data.rel.ro becoming smaller by 3,157,032bytes and 3,042,016bytes
respectively. .rodata increases by 1,432,448bytes, giving an overall
4,766,600bytes saving.
To make metric strings more shareable, the topic is changed from say
'skx metrics' to just 'metrics'.
To try to help with the memory layout the pmu_events are ordered as used
by perf qsort comparator functions.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220812230949.683239-14-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Aug 2022 23:09:47 +0000 (16:09 -0700)]
perf metrics: Copy entire pmu_event in find metric
The pmu_event passed to the pmu_events_table_for_each_event is invalid
after the loop. Copy the entire struct in metricgroup__find_metric.
Reduce the scope of this function to static.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220812230949.683239-13-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Aug 2022 23:09:46 +0000 (16:09 -0700)]
perf pmu-events: Hide the pmu_events
Hide that the pmu_event structs are an array with a new wrapper struct.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220812230949.683239-12-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Aug 2022 23:09:45 +0000 (16:09 -0700)]
perf pmu-events: Don't assume pmu_event is an array
The current code assumes that a struct pmu_event can be iterated over
forward until a NULL pmu_event is encountered.
This makes it difficult to refactor pmu_event.
Add a loop function taking a callback function that's passed the struct
pmu_event.
This way the pmu_event is only needed for one element and not an entire
array.
Switch existing code iterating over the pmu_event arrays to use the new
loop function pmu_events_table_for_each_event.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220812230949.683239-11-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Aug 2022 23:09:44 +0000 (16:09 -0700)]
perf pmu-events: Move test events/metrics to JSON
Move arrays of pmu_events into the JSON code so that it may be
regenerated and modified by the jevents.py script.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220812230949.683239-10-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Aug 2022 23:09:43 +0000 (16:09 -0700)]
perf test: Use full metric resolution
The simple metric resolution doesn't handle recursion properly, switch
to use the full resolution as with the parse-metric tests which also
increases coverage. Don't set the values for the metric backward as
failures to generate a result are ignored.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220812230949.683239-9-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Aug 2022 23:09:42 +0000 (16:09 -0700)]
perf pmu-events: Hide pmu_events_map
Move usage of the table to pmu-events.c so it may be hidden. By
abstracting the table the implementation can later be changed.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220812230949.683239-8-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Aug 2022 23:09:41 +0000 (16:09 -0700)]
perf pmu-events: Avoid passing pmu_events_map
Preparation for hiding pmu_events_map as an implementation detail. While
the map is passed, the table of events is all that is normally wanted.
While modifying the function's types, rename pmu_events_map__find to
pmu_events_table__find to match later encapsulation. Similarly rename
pmu_add_cpu_aliases_map to pmu_add_cpu_aliases_table.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220812230949.683239-7-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Aug 2022 23:09:40 +0000 (16:09 -0700)]
perf pmu-events: Hide pmu_sys_event_tables
Move usage of the table to pmu-events.c so it may be hidden. By
abstracting the table the implementation can later be changed.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220812230949.683239-6-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Aug 2022 23:09:39 +0000 (16:09 -0700)]
perf jevents: Sort JSON files entries
Sort the JSON files entries on conversion to C. The sort order tries to
replicated cmp_sevent from pmu.c so that the input there is already
sorted except for sysfs events. Specifically, the sort order is given by
the tuple:
(not j.desc is None, fix_none(j.topic), fix_none(j.name), fix_none(j.pmu), fix_none(j.metric_name))
which is putting events with descriptions and topics before those
without, then sorting by name, then pmu and finally metric_name
Add the topic to JsonEvent on reading to simplify. Remove an unnecessary
lambda in the JSON reading.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220812230949.683239-5-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Aug 2022 23:09:38 +0000 (16:09 -0700)]
perf jevents: Provide path to JSON file on error
If a JSONDecoderError or similar is raised then it is useful to know the
path. Print this and then raise the exception agan.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220812230949.683239-4-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Aug 2022 23:09:37 +0000 (16:09 -0700)]
perf jevents: Remove the type/version variables
pmu_events_map has a type variable that is always initialized to "core"
and a version variable that is never read. Remove these from the API as
it is straightforward to add them back when necessary.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220812230949.683239-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Aug 2022 23:09:36 +0000 (16:09 -0700)]
perf jevent: Add an 'all' architecture argument
When 'all' is passed as the architecture generate a mapping table for
all architectures. This simplifies testing. To identify the table for an
architecture add an arch variable to the pmu_events_map.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220812230949.683239-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Sat, 13 Aug 2022 01:39:43 +0000 (18:39 -0700)]
Merge tag 'riscv-for-linus-5.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
"There's still a handful of new features in here, but there are a lot
of fixes/cleanups as well:
- Support for the Zicbom extension for explicit cache-block
management, along with the necessary bits to make the non-standard
cache management ops on the Allwinner D1 function
- Support for the Zihintpause extension, which codifies a go-slow
instruction used for cpu_relax()
- Support for the Sstc extension for supervisor-mode timer/counter
management
- Many device tree fixes and cleanups, including a large set for the
Canaan device trees
- A handful of fixes and cleanups for the PMU driver"
* tag 'riscv-for-linus-5.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (43 commits)
dt-bindings: gpio: sifive: add gpio-line-names
wireguard: selftests: set CONFIG_NONPORTABLE on riscv32
RISC-V: KVM: Support sstc extension
RISC-V: Improve SBI definitions
RISC-V: Move counter info definition to sbi header file
RISC-V: Fix SBI PMU calls for RV32
RISC-V: Update user page mapping only once during start
RISC-V: Fix counter restart during overflow for RV32
RISC-V: Prefer sstc extension if available
RISC-V: Enable sstc extension parsing from DT
RISC-V: Add SSTC extension CSR details
riscv:uprobe fix SR_SPIE set/clear handling
dt-bindings: riscv: fix SiFive l2-cache's cache-sets
riscv: ensure cpu_ops_sbi is declared
RISC-V: cpu_ops_spinwait.c should include head.h
RISC-V: Declare cpu_ops_spinwait in <asm/cpu_ops.h>
riscv: dts: starfive: correct number of external interrupts
riscv: dts: sifive unmatched: Add PWM controlled LEDs
riscv/purgatory: Omit use of bin2c
riscv/purgatory: hard-code obj-y in Makefile
...
* tag 'devicetree-fixes-for-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: chrome: google,cros-ec-typec: restrict allowed properties
dt-bindings: Drop Dan Murphy and Ricardo Rivera-Matos
dt-bindings: Drop Robert Jones
dt-bindings: Drop Beniamin Bia and Stefan Popa
dt-bindings: iio: Drop Bogdan Pricop
dt-bindings: iio: Drop Joachim Eastwood
dt-bindings: mailbox: arm,mhu: Make secure interrupt optional
dt-bindings: pinctrl: qcom,ipq6018: Fix example 'gpio-ranges' size
dt-bindings: Drop DT_MK_SCHEMA_FLAGS conditional selecting schema files
dt-bindings: mfd: convert to yaml Qualcomm SPMI PMIC
dt-bindings: mmc: sdhci-msm: Fix 'operating-points-v2 was unexpected' issue
dt-bindings: display: simple-framebuffer: Drop Bartlomiej Zolnierkiewicz
Drivers:
- use simple i2c probe where possible
- sun6i: add R329 support
- zynqmp: add calibration support
- vr41xx: remove unused driver"
* tag 'rtc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (31 commits)
rtc: spear: set range max
rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0
rtc: zynqmp: initialize fract_tick
rtc: Add NCT3018Y real time clock driver
dt-bindings: rtc: nuvoton: add NCT3018Y Real Time Clock
dt-bindings: rtc: nxp,pcf85063: Convert to DT schema
dt-bindings: rtc: microcrystal,rv3032: Add missing type to 'trickle-voltage-millivolt'
rtc: rx8025: fix 12/24 hour mode detection on RX-8035
rtc: cros-ec: Only warn once in .remove() about notifier_chain problems
rtc: vr41xx: remove driver
rtc: mpfs: remove 'pending' variable from mpfs_rtc_wakeup_irq_handler()
rtc: rv8803: fix missing unlock on error in rv8803_set_time()
rtc: zynqmp: Add calibration set and get support
rtc: zynqmp: Updated calibration value
dt-bindings: rtc: zynqmp: Add clock information
rtc: sun6i: add support for R329 RTC
rtc: Directly use ida_alloc()/free()
rtc: Introduce ti-k3-rtc
dt-bindings: rtc: Add TI K3 RTC description
dt-bindings: rtc: qcom-pm8xxx-rtc: Update the maintainers section
...
Keith Busch [Fri, 12 Aug 2022 22:56:33 +0000 (15:56 -0700)]
fs: don't randomize struct kiocb fields
This is a size sensitive structure and randomizing can introduce extra
padding that breaks io_uring's fixed size expectations. There are few
fields here as it is, half of which need a fixed order to optimally
pack, so the randomization isn't providing much.
Ronnie Sahlberg [Fri, 12 Aug 2022 00:51:18 +0000 (19:51 -0500)]
cifs: Do not access tcon->cfids->cfid directly from is_path_accessible
cfids will soon keep a list of cached fids so we should not access this
directly from outside of cached_dir.c
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
shaomin Deng [Sun, 7 Aug 2022 16:02:39 +0000 (12:02 -0400)]
perf scripting python: Delete repeated word in comments
Delete the repeated word "into" in comments.
Signed-off-by: shaomin Deng <dengshaomin@cdjrlc.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220807160239.474-1-dengshaomin@cdjrlc.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Describe exactly what properties are allowed in Google Chrome OS EC Type
C port, so the schema can properly validate the DTS. Existing DTS
defines always connectors with unit addresses, not a sole "connector"
child.
projects / users / jedix / linux-maple.git / log