If the call to spi_register_master() fails on probe of the NetUP
Universal DVB driver, the spi_master struct is erroneously not freed.
Likewise, if spi_new_device() fails, the spi_controller struct is
not unregistered. Plug the leaks.
While at it, fix an ordering issue in netup_spi_release() wherein
spi_unregister_master() is called after fiddling with the IRQ control
register. The correct order is to call spi_unregister_master() *before*
this teardown step because bus accesses may still be ongoing until that
function returns.
If a user holds a button down on a remote, then no ir idle interrupt will
be generated until the user releases the button, depending on how quickly
the remote repeats. No IR is processed until that point, which means that
holding down a button may not do anything.
This also resolves an issue on a Cubieboard 1 where the IR receiver is
picking up ambient infrared as IR and spews out endless
"rc rc0: IR event FIFO is full!" messages unless you choose to live in
the dark.
Cc: stable@vger.kernel.org Tested-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Maxime Ripard <mripard@kernel.org> Reported-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The gspca driver leaks memory when a probe fails. gspca_dev_probe2()
calls v4l2_device_register(), which takes a reference to the
underlying device node (in this case, a USB interface). But the
failure pathway neglects to call v4l2_device_unregister(), the routine
responsible for dropping this reference. Consequently the memory for
the USB interface and its device never gets released.
To let userspace know what 'scancodes' should be used in EVIOCGKEYCODE
and EVIOCSKEYCODE ioctls, we should send EV_MSC/MSC_SCAN events in
addition to EV_KEY/KEY_* events. The driver already declared MSC_SCAN
capability, so it is only matter of actually sending the events.
The per-cpu bpf_redirect_info is shared among all skb_do_redirect()
and BPF redirect helpers. Callers on RX path are all in BH context,
disabling preemption is not sufficient to prevent BH interruption.
In production, we observed strange packet drops because of the race
condition between LWT xmit and TC ingress, and we verified this issue
is fixed after we disable BH.
Although this bug was technically introduced from the beginning, that
is commit 3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure"),
at that time call_rcu() had to be call_rcu_bh() to match the RCU context.
So this patch may not work well before RCU flavor consolidation has been
completed around v5.0.
Update the comments above the code too, as call_rcu() is now BH friendly.
Namespaced file capabilities were introduced in 8db6c34f1dbc .
When userspace reads an xattr for a namespaced capability, a
virtualized representation of it is returned if the caller is
in a user namespace owned by the capability's owning rootid.
The function which performs this virtualization was not hooked
up if CONFIG_SECURITY=n. Therefore in that case the original
xattr was shown instead of the virtualized one.
"setcap -v" verifies the values instead of setting them, and
will check whether the rootid value is set. Therefore, with
this bug un-fixed, and with CONFIG_SECURITY=n, setcap -v will
fail:
The Allwinner V3 SoC shares the same base as the V3s but comes with
extra pins and features available. As a result, it has its dedicated
compatible string (already used in device trees), which is added here.
$(error-if,...) is expanded to an empty string. Currently, it relies on
eval_clause() returning xstrdup("") when all attempts for expansion fail,
but the correct implementation is to make do_error_if() return xstrdup("").
Two clock divider tables are missing sentinel at the end. Effect of that
is that clock framework reads past the last entry. Fix that with adding
sentinel at the end.
When using 'perf record's option '-I' or '--user-regs=' along with
argument '?' to list available register names, memory of variable 'os'
allocated by strdup() needs to be released before __parse_regs()
returns, otherwise memory leak will occur.
Fixes: bcc84ec65ad1 ("perf record: Add ability to name registers to record") Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Li Bin <huawei.libin@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20200703093344.189450-1-zhengzengkai@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When there are other PWM controllers enabled along with pwm-lp3943,
pwm-lp3942 is failing to probe with -EEXIST error. This is because
other PWM controllers are probed first and assigned PWM base 0 and
pwm-lp3943 is requesting for 0 again.
In order to avoid this, assign the chip base with -1, so that it is
dynamically allocated.
clang produces a build failure in configurations without COMMON_CLK
when a timeout calculation goes wrong:
arm-linux-gnueabi-ld: drivers/watchdog/coh901327_wdt.o: in function `coh901327_enable':
coh901327_wdt.c:(.text+0x50): undefined reference to `__bad_udelay'
Add a Kconfig dependency to only do build testing when COMMON_CLK
is enabled.
The use of msleep() in the restart handler will cause scheduler to
induce a context switch which is not desirable. This generates below
warning on SDX55 when WDT is the only available restart source:
[ 39.800188] reboot: Restarting system
[ 39.804115] ------------[ cut here ]------------
[ 39.807855] WARNING: CPU: 0 PID: 678 at kernel/rcu/tree_plugin.h:297 rcu_note_context_switch+0x190/0x764
[ 39.812538] Modules linked in:
[ 39.821954] CPU: 0 PID: 678 Comm: reboot Not tainted 5.10.0-rc1-00063-g33a9990d1d66-dirty #47
[ 39.824854] Hardware name: Generic DT based system
[ 39.833470] [<c0310fbc>] (unwind_backtrace) from [<c030c544>] (show_stack+0x10/0x14)
[ 39.838154] [<c030c544>] (show_stack) from [<c0c218f0>] (dump_stack+0x8c/0xa0)
[ 39.846049] [<c0c218f0>] (dump_stack) from [<c0322f80>] (__warn+0xd8/0xf0)
[ 39.853058] [<c0322f80>] (__warn) from [<c0c1dc08>] (warn_slowpath_fmt+0x64/0xc8)
[ 39.859925] [<c0c1dc08>] (warn_slowpath_fmt) from [<c038b6f4>] (rcu_note_context_switch+0x190/0x764)
[ 39.867503] [<c038b6f4>] (rcu_note_context_switch) from [<c0c2aa3c>] (__schedule+0x84/0x640)
[ 39.876685] [<c0c2aa3c>] (__schedule) from [<c0c2b050>] (schedule+0x58/0x10c)
[ 39.885095] [<c0c2b050>] (schedule) from [<c0c2eed0>] (schedule_timeout+0x1e8/0x3d4)
[ 39.892135] [<c0c2eed0>] (schedule_timeout) from [<c039ad40>] (msleep+0x2c/0x38)
[ 39.899947] [<c039ad40>] (msleep) from [<c0a59d0c>] (qcom_wdt_restart+0xc4/0xcc)
[ 39.907319] [<c0a59d0c>] (qcom_wdt_restart) from [<c0a58290>] (watchdog_restart_notifier+0x18/0x28)
[ 39.914715] [<c0a58290>] (watchdog_restart_notifier) from [<c03468e0>] (atomic_notifier_call_chain+0x60/0x84)
[ 39.923487] [<c03468e0>] (atomic_notifier_call_chain) from [<c030ae64>] (machine_restart+0x78/0x7c)
[ 39.933551] [<c030ae64>] (machine_restart) from [<c0348048>] (__do_sys_reboot+0xdc/0x1e0)
[ 39.942397] [<c0348048>] (__do_sys_reboot) from [<c0300060>] (ret_fast_syscall+0x0/0x54)
[ 39.950721] Exception stack(0xc3e0bfa8 to 0xc3e0bff0)
[ 39.958855] bfa0: 0001221cbed2fe24fee1dead281219690123456700000000
[ 39.963832] bfc0: 0001221cbed2fe240000000300000058000225e0000000000000000000000000
[ 39.971985] bfe0: b6e62560bed2fc8400010fd8b6e62580
[ 39.980124] ---[ end trace 3f578288bad866e4 ]---
Hence, replace msleep() with mdelay() to fix this issue.
The ndo_start_xmit() method must not attempt to free the skb to transmit
when returning NETDEV_TX_BUSY. Therefore, make sure the
korina_send_packet() function returns NETDEV_TX_OK when it frees a packet.
Fixes: ef11291bcd5f ("Add support the Korina (IDT RC32434) Ethernet MAC") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20201214220952.19935-1-vincent.stehle@laposte.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is an unescaped left brace in a regex in OPEN_BRACE check. This
throws a runtime error when checkpatch is run with --fix flag and the
OPEN_BRACE check is executed.
Fix it by escaping the left brace.
Link: https://lkml.kernel.org/r/20201115202928.81955-1-dwaipayanray1@gmail.com Fixes: 8d1824780f2f ("checkpatch: add --fix option for a couple OPEN_BRACE misuses") Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com> Acked-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
xterm serial channel was leaking a fd used in setting up the
port helper
This bug is prehistoric - it predates switching to git. The "fixes"
header here is really just to mark all the versions we would like this to
apply to which is "Anything from the Cretaceous period onwards".
No dinosaurs were harmed in fixing this bug.
Fixes: b40997b872cd ("um: drivers/xterm.c: fix a file descriptor leak") Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix a logical error in tty reading. We get 0 and errno == EAGAIN
on the first attempt to read from a closed file descriptor.
Compared to that a true EAGAIN is EAGAIN and -1.
If we check errno for EAGAIN first, before checking the return
value we miss the fact that the descriptor is closed.
This bug is as old as the driver. It was not showing up with
the original POLL based IRQ controller, because it was
producing multiple events. Switching to EPOLL unmasked it.
Fixes: ff6a17989c08 ("Epoll based IRQ controller") Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
A reboot notifier, which stops the WDT by calling the stop hook without
any check, would be registered when we set WDOG_STOP_ON_REBOOT flag.
Howerer we allow the WDT driver to omit the stop hook since commit
"d0684c8a93549" ("watchdog: Make stop function optional") and provide
a module parameter for user that controls the WDOG_STOP_ON_REBOOT flag
in commit 9232c80659e94 ("watchdog: Add stop_on_reboot parameter to
control reboot policy"). Together that commits make user potential to
insert a watchdog driver that don't provide a stop hook but with the
stop_on_reboot parameter set, then dereferencing of null pointer occurs
on system reboot.
Check the stop hook before registering the reboot notifier to fix the
issue.
Fixes: d0684c8a9354 ("watchdog: Make stop function optional") Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20201109130512.28121-1-wangwensheng4@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
As the specification described, users must check busy bit before start
a new loading operation to make sure that the previous loading is done
and the device is ready to accept a new one.
sprd_wdt_start() would return fail if the loading operation is not completed
in a certain time, disabling watchdog for that case would probably cause
the kernel crash when kick watchdog later, that's too bad, so remove the
watchdog disable operation for the fail case to make sure other parts in
the kernel can run normally.
The error handling frees "ctl" but it's still on the "dsp->ctl_list"
list so that could result in a use after free. Remove it from the list
before returning.
Fixes: 2323736dca72 ("ASoC: wm_adsp: Add basic support for rev 1 firmware file format") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/X9B0keV/02wrx9Xs@mwanda Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When we set up a TDLS station, we set sta->sta.bandwidth solely based
on the capabilities, because the "what's the current bandwidth" check
is bypassed and only applied for other types of stations.
This leads to the unfortunate scenario that the sta->sta.bandwidth is
160 MHz if both stations support it, but we never actually configure
this bandwidth unless the AP is already using 160 MHz; even for wider
bandwidth support we only go up to 80 MHz (at least right now.)
For iwlwifi, this can also lead to firmware asserts, telling us that
we've configured the TX rates for a higher bandwidth than is actually
available due to the PHY configuration.
For non-TDLS, we check against the interface's requested bandwidth,
but we explicitly skip this check for TDLS to cope with the wider BW
case. Change this to
(a) still limit to the TDLS peer's own chandef, which gets factored
into the overall PHY configuration we request from the driver,
and
(b) limit it to when the TDLS peer is authorized, because it's only
factored into the channel context in this case.
The platform device driver name is "max77693-muic", so advertise it
properly in the modalias string. This fixes automated module loading when
this driver is compiled as a module.
Fixes: db1b9037424b ("extcon: MAX77693: Add extcon-max77693 driver to support Maxim MAX77693 MUIC device") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The periph_clks[] array contains duplicated entry for Security Engine
clock which was meant to be defined for T210, but it wasn't added
properly. This patch corrects the T210 SE entry and fixes the following
error message on T114/T124: "Tegra clk 127: register failed with -17".
Fixes: dc37fec48314 ("clk: tegra: periph: Add new periph clks and muxes for Tegra210")
Tested-by Nicolas Chauvet <kwizart@gmail.com>
Reported-by Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20201025224212.7790-1-digetx@gmail.com Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix to restore BTF if single-stepping causes a page fault and
it is cancelled.
Usually the BTF flag was restored when the single stepping is done
(in resume_execution()). However, if a page fault happens on the
single stepping instruction, the fault handler is invoked and
the single stepping is cancelled. Thus, the BTF flag is not
restored.
The warning message from nfsd terminating normally
can confuse system adminstrators or monitoring software.
Though it's not exactly fair to pin-point a commit where it
originated, the current form in the current place started
to appear in:
Fixes: e096bbc6488d ("knfsd: remove special handling for SIGHUP") Signed-off-by: kazuo ito <kzpn200@gmail.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The pm_runtime_enable will decrement the power disable depth. Imbalance
depth will resulted in enabling runtime PM of device fails later. Thus
a pairing decrement must be needed on the error handling path to keep it
balanced.
Partitions with cache nodes in the device tree can encounter the
following warning on resume:
CPU 0 already accounted in PowerPC,POWER9@0(Data)
WARNING: CPU: 0 PID: 3177 at arch/powerpc/kernel/cacheinfo.c:197 cacheinfo_cpu_online+0x640/0x820
These calls to cacheinfo_cpu_offline/online have been redundant since
commit e610a466d16a ("powerpc/pseries/mobility: rebuild cacheinfo
hierarchy post-migration").
This never works because there is no way to supply a valid stream id
using this interface, and H_VASI_STATE is called with a stream id of
zero. So this call path is useless at best.
2. When a stream id is written to /sys/devices/system/power/hibernate.
pseries_suspend_begin() is polled directly from store_hibernate()
until the stream is in the "Suspending" state (i.e. the platform is
ready for the OS to suspend execution):
3. When a stream id is written to /sys/devices/system/power/hibernate
(continued). After #2, pseries_suspend_begin() is called once again
from the pm core:
Fix array names to match assignments for data items and data items
counter in 'mlxplat_mlxcpld_default_items' structure for:
.data = mlxplat_mlxcpld_default_pwr_items_data,
.count = ARRAY_SIZE(mlxplat_mlxcpld_pwr),
and
.data = mlxplat_mlxcpld_default_fan_items_data,
.count = ARRAY_SIZE(mlxplat_mlxcpld_fan),
Replace:
- 'mlxplat_mlxcpld_pwr' by 'mlxplat_mlxcpld_default_pwr_items_data' for
ARRAY_SIZE() calculation.
- 'mlxplat_mlxcpld_fan' by 'mlxplat_mlxcpld_default_fan_items_data'
for ARRAY_SIZE() calculation.
Fixes: c6acad68eb2d ("platform/mellanox: mlxreg-hotplug: Modify to use a regmap interface") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20201207174745.22889-2-vadimp@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Building with W=2 prints a number of warnings for one function that
has a pointer type mismatch:
linux/seq_buf.h: In function 'seq_buf_init':
linux/seq_buf.h:35:12: warning: pointer targets in assignment from 'unsigned char *' to 'char *' differ in signedness [-Wpointer-sign]
Change the type in the function prototype according to the type in
the structure.
Link: https://lkml.kernel.org/r/20201026161108.3707783-1-arnd@kernel.org Fixes: 9a7777935c34 ("tracing: Convert seq_buf fields to be like seq_file fields") Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The driver did not return an error in the case where
pm8001_configure_phy_settings() failed.
Use rc to store the return value of pm8001_configure_phy_settings().
Link: https://lore.kernel.org/r/20201205115551.2079471-1-zhangqilong3@huawei.com Fixes: 279094079a44 ("[SCSI] pm80xx: Phy settings support for motherboard controller.") Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: 501c574f4e3a5 ("cpufreq: mediatek: Add support of cpufreq to MT2701/MT7623 SoC") Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
ARM virtual counter supports event stream, it can only trigger an event
when the trigger bit (the value of CNTKCTL_EL1.EVNTI) of CNTVCT_EL0 changes,
so the actual period of event stream is 2^(cntkctl_evnti + 1). For example,
when the trigger bit is 0, then virtual counter trigger an event for every
two cycles.
While we're at it, rework the way we compute the trigger bit position
by making it more obvious that when bits [n:n-1] are both set (with n
being the most significant bit), we pick bit (n + 1).
Fixes: 037f637767a8 ("drivers: clocksource: add support for ARM architected timer event stream") Suggested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201204073126.6920-3-zhukeqian1@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
jz4740_i2s_set_sysclk() does not check the return values of clk_get(),
while the file dereferences the pointers in clk_put().
Add the missed checks to fix it.
mlx5 firmware expects driver version in specific format X.X.X, so
make it always correct and based on real kernel version aligned with
the driver.
Fixes: 012e50e109fd ("net/mlx5: Set driver version into firmware") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
For UARTs, the local pull-ups should be on the RX pin, not the TX pin.
UARTs transmit active-low, so a disconnected RX pin should be pulled
high instead of left floating to prevent noise being interpreted as
transmissions.
This gets rid of bogus sysrq events when the UART console is not
connected.
if of_find_device_by_node() succeed, pinctrl_falcon_probe() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.
Due to strobe signal not being propagated from CPU to securam
the securam needs to be mapped as device or strongly ordered memory
to work properly. Otherwise, updating to one offset may affect
the adjacent locations in securam.
The "a->index" value comes from the user via the ioctl. The problem is
that the shift can wrap resulting in setting "mxb->cur_audinput" to an
invalid value, which later results in an array overflow.
commit f8f6ae5d077a ("mm: always have io_remap_pfn_range() set
pgprot_decrypted()") allows drivers using mmap to put PCI memory mapped
BAR space into userspace to work correctly on AMD SME systems that default
to all memory encrypted.
Since vfio_pci_mmap_fault() is working with PCI memory mapped BAR space it
should be calling io_remap_pfn_range() otherwise it will not work on SME
systems.
Fixes: 11c4cd07ba11 ("vfio-pci: Fault mmaps to enable vma tracking") Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Peter Xu <peterx@redhat.com> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
nfsiod is currently a concurrency-managed workqueue (CMWQ).
This means that workitems scheduled to nfsiod on a given CPU are queued
behind all other work items queued on any CMWQ on the same CPU. This
can introduce unexpected latency.
Occaionally nfsiod can even cause excessive latency. If the work item
to complete a CLOSE request calls the final iput() on an inode, the
address_space of that inode will be dismantled. This takes time
proportional to the number of in-memory pages, which on a large host
working on large files (e.g.. 5TB), can be a large number of pages
resulting in a noticable number of seconds.
We can avoid these latency problems by switching nfsiod to WQ_UNBOUND.
This causes each concurrent work item to gets a dedicated thread which
can be scheduled to an idle CPU.
There is precedent for this as several other filesystems use WQ_UNBOUND
workqueue for handling various async events.
Signed-off-by: NeilBrown <neilb@suse.de> Fixes: ada609ee2ac2 ("workqueue: use WQ_MEM_RECLAIM instead of WQ_RESCUER") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
NLM uses an interval-based rebinding, i.e. it clears the transport's
binding under certain conditions if more than 60 seconds have elapsed
since the connection was last bound.
This rebinding is not necessary for an autobind RPC client over a
connection-oriented protocol like TCP.
It can also cause problems: it is possible for nlm_bind_host() to clear
XPRT_BOUND whilst a connection worker is in the middle of trying to
reconnect, after it had already been checked in xprt_connect().
When the connection worker notices that XPRT_BOUND has been cleared
under it, in xs_tcp_finish_connecting(), that results in:
xs_tcp_setup_socket: connect returned unhandled error -107
Worse, it's possible that the two can get into lockstep, resulting in
the same behaviour repeated indefinitely, with the above error every
300 seconds, without ever recovering, and the connection never being
established. This has been seen in practice, with a large number of NLM
client tasks, following a server restart.
The existing callers of nlm_bind_host & nlm_rebind_host should not need
to force the rebind, for TCP, so restrict the interval-based rebinding
to UDP only.
For TCP, we will still rebind when needed, e.g. on timeout, and connection
error (including closure), since connection-related errors on an existing
connection, ECONNREFUSED when trying to connect, and rpc_check_timeout(),
already unconditionally clear XPRT_BOUND.
To avoid having to add the fix, and explanation, to both nlm_bind_host()
and nlm_rebind_host(), remove the duplicate code from the former, and
have it call the latter.
Drop the dprintk, which adds no value over a trace.
Signed-off-by: Calum Mackay <calum.mackay@oracle.com> Fixes: 35f5a422ce1a ("SUNRPC: new interface to force an RPC rebind") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
According to RFC5666, the correct netid for an IPv6 addressed RDMA
transport is "rdma6", which we've supported as a mount option since
Linux-4.7. The problem is when we try to load the module "xprtrdma6",
that will fail, since there is no modulealias of that name.
Fixes: 181342c5ebe8 ("xprtrdma: Add rdma6 option to support NFS/RDMA IPv6") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, the client will always ask for security_labels if the server
returns that it supports that feature regardless of any LSM modules
(such as Selinux) enforcing security policy. This adds performance
penalty to the READDIR operation.
Client adjusts superblock's support of the security_label based on
the server's support but also current client's configuration of the
LSM modules. Thus, prior to using the default bitmask in READDIR,
this patch checks the server's capabilities and then instructs
READDIR to remove FATTR4_WORD2_SECURITY_LABEL from the bitmask.
v5: fixing silly mistakes of the rushed v4
v4: simplifying logic
v3: changing label's initialization per Ondrej's comment
v2: dropping selinux hook and using the sb cap.
Suggested-by: Ondrej Mosnacek <omosnace@redhat.com> Suggested-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Fixes: 2b0143b5c986 ("VFS: normal filesystems (and lustre): d_inode() annotations") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The wmi service available event has been
extended to contain extra 128 bit for new services
to be indicated by firmware.
Currently the presence of any optional TLVs in
the wmi service available event leads to a parsing
error with the below error message:
ath10k_snoc 18800000.wifi: failed to parse svc_avail tlv: -71
The wmi service available event parsing should
not return error for the newly added optional TLV.
Fix this parsing for service available event message.
Declare the full size array for all revisions of PAX register sets
to avoid potentially out of bound access of the register array
when they are being initialized in iproc_pcie_rev_init().
The shift of 1 by align_order is evaluated using 32 bit arithmetic and the
result is assigned to a resource_size_t type variable that is a 64 bit
unsigned integer on 64 bit platforms. Fix an overflow before widening issue
by making the 1 a ULL.
Addresses-Coverity: ("Unintentional integer overflow") Fixes: 32a9a682bef2 ("PCI: allow assignment of memory resources with a specified alignment") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
32-bit BARs are limited to 2GB size (2^31). By extension, I assume 64-bit
BARs are limited to 2^63 bytes. Limit the alignment requested by the
"pci=resource_alignment=" command-line parameter to 2^63.
When an interrupt allocation fails for N interrupts, it is pretty
common for the error handling code to free the same number of interrupts,
no matter how many interrupts have actually been allocated.
This may result in the domain freeing code to be unexpectedly called
for interrupts that have no mapping in that domain. Things end pretty
badly.
Instead, add some checks to irq_domain_free_irqs_hierarchy() to make sure
that thiss does not follow the hierarchy if no mapping exists for a given
interrupt.
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to call pm_runtime_put_noidle will result
in reference leak in callers(bq24190_sysfs_show,
bq24190_charger_get_property, bq24190_charger_set_property,
bq24190_battery_get_property, bq24190_battery_set_property),
so we should fix it.
Fixes: f385e6e2a1532 ("power: bq24190_charger: Use PM runtime autosuspend") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 9c80662a74cd ("power: supply: axp288_charger: Add special handling
for HP Pavilion x2 10") added special handling for HP Pavilion x2 10
models which use the weird combination of a Type-C connector and the
non Type-C aware AXP288 PMIC.
This special handling was activated by a DMI match a the product-name
of "HP Pavilion x2 Detachable". Recently I've learned that there are
also older "HP Pavilion x2 Detachable" models with an AXP288 PMIC +
a micro-usb connector where we should not activate the special handling
for the Type-C connectors.
Extend the matching to also match on the DMI board-name and match on the
2 boards (one Bay Trail based one Cherry Trail based) of which we are
certain that they use the AXP288 + Type-C connector combination.
Note the DSDT code from these older (AXP288 + micro-USB) models contains
some AML code (which never runs under Linux) which reads the micro-USB
connector id-pin and if it is pulled to ground, which would normally mean
the port is in host mode!, then it sets the input-current-limit to 3A,
it seems HP is using the micro-USB port as a charging only connector
and identifies their own 3A capable charger though this hack which is a
major violation of the USB specs. Note HP also hardcodes a 2A limit
when the id-pin is not pulled to ground, which is also in violation
of the specs.
I've no intention to add support for HP's hack to support 3A charging
on these older models. By making the DMI matches for the Type-C equipped
models workaround more tighter, these older models will be treated just
like any other AXP288 + micro-USB equipped device and the input-current
limit will follow the BC 1.2 spec (using the defacto standard values
there where the BC 1.2 spec defines a range).
Fixes: 9c80662a74cd ("power: supply: axp288_charger: Add special handling for HP Pavilion x2 10") BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1896924 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The board has a standard USB A female port connected to the USB OTG
controller's data pins. Set dr_mode in the OTG controller node to
indicate this usage, instead of having the implementation guess.
The switches with integrated CPUs have only got a single i2c controller.
They incorrectly gained one when they were split from the Armada-XP.
Fixes: 43e28ba87708 ("ARM: dts: Use armada-370-xp as a base for armada-xp-98dx3236") Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In current code, it jumps to ida_simple_remove() when ida_simple_get()
failes to allocate an ID. Just return to fix it.
Fixes: 0fae198988b8 ("HSI: omap_ssi: built omap_ssi and omap_ssi_port into one module") Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Attempting to send a power request during PM operations, when the QMI
handle isn't initialized results in a NULL pointer dereference. So check
if the QMI handle has been initialized before attempting to post the
power requests.
Currently, lwt_len_hist's map lwt_len_hist_map is uses pinning, and the
map isn't cleared on test end. This leds to reuse of that map for
each test, which prevents the results of the test from being accurate.
This commit fixes the problem by removing of pinned map from bpffs.
Also, this commit add the executable permission to shell script
files.
Fixes: f74599f7c5309 ("bpf: Add tests and samples for LWT-BPF") Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201124090310.24374-7-danieltimlee@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Remove PSU EEPROM configuration for systems class equipped with
Mellanox chip Spectrum and ATOM CPU - system types MSN274x. Till now
all the systems from this class used few types of power units, all
equipped with EEPROM device with address space two bytes. Thus, all
these devices have been handled by EEPROM driver "24c02".
There is a new requirement is to support power unit replacement by "off
the shelf" device, matching electrical required parameters. Such device
can be equipped with different EEPROM type, which could be one byte
address space addressing or even could be not equipped with EEPROM.
In such case "24c02" will not work.
Fixes: ef08e14a3 ("platform/x86: mlx-platform: Add support for new msn274x system type") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20201125101056.174708-3-vadimp@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Remove PSU EEPROM configuration for systems class equipped with
Mellanox chip Spectrum and Celeron CPU - system types MSN2700, MSN2100.
Till now all the systems from this class used few types of power units,
all equipped with EEPROM device with address space two bytes. Thus, all
these devices have been handled by EEPROM driver "24c02".
There is a new requirement is to support power unit replacement by "off
the shelf" device, matching electrical required parameters. Such device
can be equipped with different EEPROM type, which could be one byte
address space addressing or even could be not equipped with EEPROM.
In such case "24c02" will not work.
Fixes: c6acad68e ("platform/mellanox: mlxreg-hotplug: Modify to use a regmap interface") Fixes: ba814fdd0 ("platform/x86: mlx-platform: Use defines for bus assignment") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20201125101056.174708-2-vadimp@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
ezusb_xmit() allocates a context which is leaked if
orinoco_process_xmit_skb() returns an error.
Move ezusb_alloc_ctx() after the invocation of
orinoco_process_xmit_skb() because the context is not needed so early.
ezusb_access_ltv() will cleanup the context in case of an error.
Fixes: bac6fafd4d6a0 ("orinoco: refactor xmit path") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201113212252.2243570-2-bigeasy@linutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org>
The pincontrol node is needed for USB Host since Linux v5.7-rc1. Without
it the driver probes but VBus is not powered because of wrong pincontrol
configuration.
The pincontrol node is needed for USB Host since Linux v5.7-rc1. Without
it the driver probes but VBus is not powered because of wrong pincontrol
configuration.
projects / users / dwmw2 / linux.git / log