Linus Torvalds [Thu, 20 Feb 2025 23:37:17 +0000 (15:37 -0800)]
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull BPF fixes from Daniel Borkmann:
- Fix a soft-lockup in BPF arena_map_free on 64k page size kernels
(Alan Maguire)
- Fix a missing allocation failure check in BPF verifier's
acquire_lock_state (Kumar Kartikeya Dwivedi)
- Fix a NULL-pointer dereference in trace_kfree_skb by adding kfree_skb
to the raw_tp_null_args set (Kuniyuki Iwashima)
- Fix a deadlock when freeing BPF cgroup storage (Abel Wu)
- Fix a syzbot-reported deadlock when holding BPF map's freeze_mutex
(Andrii Nakryiko)
- Fix a use-after-free issue in bpf_test_init when eth_skb_pkt_type is
accessing skb data not containing an Ethernet header (Shigeru
Yoshida)
- Fix skipping non-existing keys in generic_map_lookup_batch (Yan Zhai)
- Several BPF sockmap fixes to address incorrect TCP copied_seq
calculations, which prevented correct data reads from recv(2) in user
space (Jiayuan Chen)
- Two fixes for BPF map lookup nullness elision (Daniel Xu)
- Fix a NULL-pointer dereference from vmlinux BTF lookup in
bpf_sk_storage_tracing_allowed (Jared Kangas)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests: bpf: test batch lookup on array of maps with holes
bpf: skip non exist keys in generic_map_lookup_batch
bpf: Handle allocation failure in acquire_lock_state
bpf: verifier: Disambiguate get_constant_map_key() errors
bpf: selftests: Test constant key extraction on irrelevant maps
bpf: verifier: Do not extract constant map keys for irrelevant maps
bpf: Fix softlockup in arena_map_free on 64k page kernel
net: Add rx_skb of kfree_skb to raw_tp_null_args[].
bpf: Fix deadlock when freeing cgroup storage
selftests/bpf: Add strparser test for bpf
selftests/bpf: Fix invalid flag of recv()
bpf: Disable non stream socket for strparser
bpf: Fix wrong copied_seq calculation
strparser: Add read_sock callback
bpf: avoid holding freeze_mutex during mmap operation
bpf: unify VM_WRITE vs VM_MAYWRITE use in BPF map mmaping logic
selftests/bpf: Adjust data size to have ETH_HLEN
bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()
bpf: Remove unnecessary BTF lookups in bpf_sk_storage_tracing_allowed
- tcp:
- adjust rcvq_space after updating scaling ratio
- drop secpath at the same time as we currently drop dst
- eth: gtp: suppress list corruption splat in gtp_net_exit_batch_rtnl().
Previous releases - always broken:
- vsock:
- fix variables initialization during resuming
- for connectible sockets allow only connected
- eth:
- geneve: fix use-after-free in geneve_find_dev()
- ibmvnic: don't reference skb after sending to VIOS"
* tag 'net-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits)
Revert "net: skb: introduce and use a single page frag cache"
net: allow small head cache usage with large MAX_SKB_FRAGS values
nfp: bpf: Add check for nfp_app_ctrl_msg_alloc()
tcp: drop secpath at the same time as we currently drop dst
net: axienet: Set mac_managed_pm
arp: switch to dev_getbyhwaddr() in arp_req_set_public()
net: Add non-RCU dev_getbyhwaddr() helper
sctp: Fix undefined behavior in left shift operation
selftests/bpf: Add a specific dst port matching
flow_dissector: Fix port range key handling in BPF conversion
selftests/net/forwarding: Add a test case for tc-flower of mixed port and port-range
flow_dissector: Fix handling of mixed port and port-range keys
geneve: Suppress list corruption splat in geneve_destroy_tunnels().
gtp: Suppress list corruption splat in gtp_net_exit_batch_rtnl().
dev: Use rtnl_net_dev_lock() in unregister_netdev().
net: Fix dev_net(dev) race in unregister_netdevice_notifier_dev_net().
net: Add net_passive_inc() and net_passive_dec().
net: pse-pd: pd692x0: Fix power limit retrieval
MAINTAINERS: trim the GVE entry
gve: set xdp redirect target only when it is available
...
Linus Torvalds [Thu, 20 Feb 2025 16:59:00 +0000 (08:59 -0800)]
Merge tag 'v6.14-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Fix for chmod regression
- Two reparse point related fixes
- One minor cleanup (for GCC 14 compiles)
- Fix for SMB3.1.1 POSIX Extensions reporting incorrect file type
* tag 'v6.14-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Treat unhandled directory name surrogate reparse points as mount directory nodes
cifs: Throw -EOPNOTSUPP error on unsupported reparse point type from parse_reparse_point()
smb311: failure to open files of length 1040 when mounting with SMB3.1.1 POSIX extensions
smb: client, common: Avoid multiple -Wflex-array-member-not-at-end warnings
smb: client: fix chmod(2) regression with ATTR_READONLY
Linus Torvalds [Thu, 20 Feb 2025 16:51:57 +0000 (08:51 -0800)]
Merge tag 'bcachefs-2025-02-20' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Small stuff:
- The fsck code for Hongbo's directory i_size patch was wrong, caught
by transaction restart injection: we now have the CI running
another test variant with restart injection enabled
- Another fixup for reflink pointers to missing indirect extents:
previous fix was for fsck code, this fixes the normal runtime paths
- Another small srcu lock hold time fix, reported by jpsollie"
* tag 'bcachefs-2025-02-20' of git://evilpiepirate.org/bcachefs:
bcachefs: Fix srcu lock warning in btree_update_nodes_written()
bcachefs: Fix bch2_indirect_extent_missing_error()
bcachefs: Fix fsck directory i_size checking
Linus Torvalds [Thu, 20 Feb 2025 16:48:55 +0000 (08:48 -0800)]
Merge tag 'xfs-fixes-6.14-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
"Just a collection of bug fixes, nothing really stands out"
* tag 'xfs-fixes-6.14-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: flush inodegc before swapon
xfs: rename xfs_iomap_swapfile_activate to xfs_vm_swap_activate
xfs: Do not allow norecovery mount with quotacheck
xfs: do not check NEEDSREPAIR if ro,norecovery mount.
xfs: fix data fork format filtering during inode repair
xfs: fix online repair probing when CONFIG_XFS_ONLINE_REPAIR=n
====================
net: remove the single page frag cache for good
This is another attempt at reverting commit dbae2b062824 ("net: skb:
introduce and use a single page frag cache"), as it causes regressions
in specific use-cases.
Reverting such commit uncovers an allocation issue for build with
CONFIG_MAX_SKB_FRAGS=45, as reported by Sabrina.
This series handle the latter in patch 1 and brings the revert in patch
2.
Note that there is a little chicken-egg problem, as I included into the
patch 1's changelog the splat that would be visible only applying first
the revert: I think current patch order is better for bisectability,
still the splat is useful for correct attribution.
====================
Paolo Abeni [Tue, 18 Feb 2025 18:29:40 +0000 (19:29 +0100)]
Revert "net: skb: introduce and use a single page frag cache"
After the previous commit is finally safe to revert commit dbae2b062824
("net: skb: introduce and use a single page frag cache"): do it here.
The intended goal of such change was to counter a performance regression
introduced by commit 3226b158e67c ("net: avoid 32 x truesize
under-estimation for tiny skbs").
Unfortunately, the blamed commit introduces another regression for the
virtio_net driver. Such a driver calls napi_alloc_skb() with a tiny
size, so that the whole head frag could fit a 512-byte block.
The single page frag cache uses a 1K fragment for such allocation, and
the additional overhead, under small UDP packets flood, makes the page
allocator a bottleneck.
Thanks to commit bf9f1baa279f ("net: add dedicated kmem_cache for
typical/small skb->head"), this revert does not re-introduce the
original regression. Actually, in the relevant test on top of this
revert, I measure a small but noticeable positive delta, just above
noise level.
The revert itself required some additional mangling due to recent updates
in the affected code.
Suggested-by: Eric Dumazet <edumazet@google.com> Fixes: dbae2b062824 ("net: skb: introduce and use a single page frag cache") Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
on kernel built with MAX_SKB_FRAGS=45, where SKB_WITH_OVERHEAD(1024)
is smaller than GRO_MAX_HEAD.
Such built additionally contains the revert of the single page frag cache
so that napi_get_frags() ends up using the page frag allocator, triggering
the splat.
Note that the underlying issue is independent from the mentioned
revert; address it ensuring that the small head cache will fit either TCP
and GRO allocation and updating napi_alloc_skb() and __netdev_alloc_skb()
to select kmalloc() usage for any allocation fitting such cache.
Reported-by: Sabrina Dubroca <sd@queasysnail.net> Suggested-by: Eric Dumazet <edumazet@google.com> Fixes: 3948b05950fd ("net: introduce a config option to tweak MAX_SKB_FRAGS") Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Sabrina Dubroca [Mon, 17 Feb 2025 10:23:35 +0000 (11:23 +0100)]
tcp: drop secpath at the same time as we currently drop dst
Xiumei reported hitting the WARN in xfrm6_tunnel_net_exit while
running tests that boil down to:
- create a pair of netns
- run a basic TCP test over ipcomp6
- delete the pair of netns
The xfrm_state found on spi_byaddr was not deleted at the time we
delete the netns, because we still have a reference on it. This
lingering reference comes from a secpath (which holds a ref on the
xfrm_state), which is still attached to an skb. This skb is not
leaked, it ends up on sk_receive_queue and then gets defer-free'd by
skb_attempt_defer_free.
The problem happens when we defer freeing an skb (push it on one CPU's
defer_list), and don't flush that list before the netns is deleted. In
that case, we still have a reference on the xfrm_state that we don't
expect at this point.
We already drop the skb's dst in the TCP receive path when it's no
longer needed, so let's also drop the secpath. At this point,
tcp_filter has already called into the LSM hooks that may require the
secpath, so it should not be needed anymore. However, in some of those
places, the MPTCP extension has just been attached to the skb, so we
cannot simply drop all extensions.
Nick Hu [Mon, 17 Feb 2025 05:58:42 +0000 (13:58 +0800)]
net: axienet: Set mac_managed_pm
The external PHY will undergo a soft reset twice during the resume process
when it wake up from suspend. The first reset occurs when the axienet
driver calls phylink_of_phy_connect(), and the second occurs when
mdio_bus_phy_resume() invokes phy_init_hw(). The second soft reset of the
external PHY does not reinitialize the internal PHY, which causes issues
with the internal PHY, resulting in the PHY link being down. To prevent
this, setting the mac_managed_pm flag skips the mdio_bus_phy_resume()
function.
Fixes: a129b41fe0a8 ("Revert "net: phy: dp83867: perform soft reset and retain established link"") Signed-off-by: Nick Hu <nick.hu@sifive.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250217055843.19799-1-nick.hu@sifive.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
====================
net: core: improvements to device lookup by hardware address.
The first patch adds a new dev_getbyhwaddr() helper function for
finding devices by hardware address when the rtnl lock is held. This
prevents PROVE_LOCKING warnings that occurred when rtnl lock was held
but the RCU read lock wasn't. The common address comparison logic is
extracted into dev_comp_addr() to avoid code duplication.
The second coverts arp_req_set_public() to the new helper.
====================
Breno Leitao [Tue, 18 Feb 2025 13:49:31 +0000 (05:49 -0800)]
arp: switch to dev_getbyhwaddr() in arp_req_set_public()
The arp_req_set_public() function is called with the rtnl lock held,
which provides enough synchronization protection. This makes the RCU
variant of dev_getbyhwaddr() unnecessary. Switch to using the simpler
dev_getbyhwaddr() function since we already have the required rtnl
locking.
This change helps maintain consistency in the networking code by using
the appropriate helper function for the existing locking context.
Since we're not holding the RCU read lock in arp_req_set_public()
existing code could trigger false positive locking warnings.
Fixes: 941666c2e3e0 ("net: RCU conversion of dev_getbyhwaddr() and arp_ioctl()") Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250218-arm_fix_selftest-v5-2-d3d6892db9e1@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Breno Leitao [Tue, 18 Feb 2025 13:49:30 +0000 (05:49 -0800)]
net: Add non-RCU dev_getbyhwaddr() helper
Add dedicated helper for finding devices by hardware address when
holding rtnl_lock, similar to existing dev_getbyhwaddr_rcu(). This prevents
PROVE_LOCKING warnings when rtnl_lock is held but RCU read lock is not.
Extract common address comparison logic into dev_addr_cmp().
The context about this change could be found in the following
discussion:
Yu-Chun Lin [Tue, 18 Feb 2025 08:12:16 +0000 (16:12 +0800)]
sctp: Fix undefined behavior in left shift operation
According to the C11 standard (ISO/IEC 9899:2011, 6.5.7):
"If E1 has a signed type and E1 x 2^E2 is not representable in the result
type, the behavior is undefined."
Shifting 1 << 31 causes signed integer overflow, which leads to undefined
behavior.
Fix this by explicitly using '1U << 31' to ensure the shift operates on
an unsigned type, avoiding undefined behavior.
====================
flow_dissector: Fix handling of mixed port and port-range keys
This patchset contains two fixes for flow_dissector handling of mixed
port and port-range keys, for both tc-flower case and bpf case. Each
of them also comes with a selftest.
====================
Cong Wang [Tue, 18 Feb 2025 04:32:09 +0000 (20:32 -0800)]
flow_dissector: Fix port range key handling in BPF conversion
Fix how port range keys are handled in __skb_flow_bpf_to_target() by:
- Separating PORTS and PORTS_RANGE key handling
- Using correct key_ports_range structure for range keys
- Properly initializing both key types independently
This ensures port range information is correctly stored in its dedicated
structure rather than incorrectly using the regular ports key structure.
Fixes: 59fb9b62fb6c ("flow_dissector: Fix to use new variables for port ranges in bpf hook") Reported-by: Qiang Zhang <dtzq01@gmail.com> Closes: https://lore.kernel.org/netdev/CAPx+-5uvFxkhkz4=j_Xuwkezjn9U6kzKTD5jz4tZ9msSJ0fOJA@mail.gmail.com/ Cc: Yoshiki Komachi <komachi.yoshiki@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Link: https://patch.msgid.link/20250218043210.732959-4-xiyou.wangcong@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cong Wang [Tue, 18 Feb 2025 04:32:08 +0000 (20:32 -0800)]
selftests/net/forwarding: Add a test case for tc-flower of mixed port and port-range
After this patch:
# ./tc_flower_port_range.sh
TEST: Port range matching - IPv4 UDP [ OK ]
TEST: Port range matching - IPv4 TCP [ OK ]
TEST: Port range matching - IPv6 UDP [ OK ]
TEST: Port range matching - IPv6 TCP [ OK ]
TEST: Port range matching - IPv4 UDP Drop [ OK ]
Cong Wang [Tue, 18 Feb 2025 04:32:07 +0000 (20:32 -0800)]
flow_dissector: Fix handling of mixed port and port-range keys
This patch fixes a bug in TC flower filter where rules combining a
specific destination port with a source port range weren't working
correctly.
The specific case was when users tried to configure rules like:
tc filter add dev ens38 ingress protocol ip flower ip_proto udp \
dst_port 5000 src_port 2000-3000 action drop
The root cause was in the flow dissector code. While both
FLOW_DISSECTOR_KEY_PORTS and FLOW_DISSECTOR_KEY_PORTS_RANGE flags
were being set correctly in the classifier, the __skb_flow_dissect_ports()
function was only populating one of them: whichever came first in
the enum check. This meant that when the code needed both a specific
port and a port range, one of them would be left as 0, causing the
filter to not match packets as expected.
Fix it by removing the either/or logic and instead checking and
populating both key types independently when they're in use.
Fixes: 8ffb055beae5 ("cls_flower: Fix the behavior using port ranges with hw-offload") Reported-by: Qiang Zhang <dtzq01@gmail.com> Closes: https://lore.kernel.org/netdev/CAPx+-5uvFxkhkz4=j_Xuwkezjn9U6kzKTD5jz4tZ9msSJ0fOJA@mail.gmail.com/ Cc: Yoshiki Komachi <komachi.yoshiki@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250218043210.732959-2-xiyou.wangcong@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
gtp/geneve: Suppress list_del() splat during ->exit_batch_rtnl().
The common pattern in tunnel device's ->exit_batch_rtnl() is iterating
two netdev lists for each netns: (i) for_each_netdev() to clean up
devices in the netns, and (ii) the device type specific list to clean
up devices in other netns.
Then, ->exit_batch_rtnl() could touch the same device twice.
Say we have two netns A & B and device B that is created in netns A and
moved to netns B.
1. cleanup_net() processes netns A and then B.
2. ->exit_batch_rtnl() finds the device B while iterating netns A's (ii)
[ device B is not yet unlinked from netns B as
unregister_netdevice_many() has not been called. ]
3. ->exit_batch_rtnl() finds the device B while iterating netns B's (i)
gtp and geneve calls ->dellink() at 2. and 3. that calls list_del() for (ii)
and unregister_netdevice_queue().
Calling unregister_netdevice_queue() twice is fine because it uses
list_move_tail(), but the 2nd list_del() triggers a splat when
CONFIG_DEBUG_LIST is enabled.
Possible solution is either of
(a) Use list_del_init() in ->dellink()
(b) Iterate dev with empty ->unreg_list for (i) like
#define for_each_netdev_alive(net, d) \
list_for_each_entry(d, &(net)->dev_base_head, dev_list) \
if (list_empty(&d->unreg_list))
(c) Remove (i) and delegate it to default_device_exit_batch().
This series avoids the 2nd ->dellink() by (c) to suppress the splat for
gtp and geneve.
Note that IPv4/IPv6 tunnels calls just unregister_netdevice() during
->exit_batch_rtnl() and dev is unlinked from (ii) later in ->ndo_uninit(),
so they are safe.
Also, pfcp has the same pattern but is safe because
unregister_netdevice_many() is called for each netns.
====================
Kuniyuki Iwashima [Mon, 17 Feb 2025 20:37:05 +0000 (12:37 -0800)]
geneve: Suppress list corruption splat in geneve_destroy_tunnels().
As explained in the previous patch, iterating for_each_netdev() and
gn->geneve_list during ->exit_batch_rtnl() could trigger ->dellink()
twice for the same device.
If CONFIG_DEBUG_LIST is enabled, we will see a list_del() corruption
splat in the 2nd call of geneve_dellink().
Let's remove for_each_netdev() in geneve_destroy_tunnels() and delegate
that part to default_device_exit_batch().
Kuniyuki Iwashima [Mon, 17 Feb 2025 20:37:04 +0000 (12:37 -0800)]
gtp: Suppress list corruption splat in gtp_net_exit_batch_rtnl().
Brad Spengler reported the list_del() corruption splat in
gtp_net_exit_batch_rtnl(). [0]
Commit eb28fd76c0a0 ("gtp: Destroy device along with udp socket's netns
dismantle.") added the for_each_netdev() loop in gtp_net_exit_batch_rtnl()
to destroy devices in each netns as done in geneve and ip tunnels.
However, this could trigger ->dellink() twice for the same device during
->exit_batch_rtnl().
Say we have two netns A & B and gtp device B that resides in netns B but
whose UDP socket is in netns A.
1. cleanup_net() processes netns A and then B.
2. gtp_net_exit_batch_rtnl() finds the device B while iterating
netns A's gn->gtp_dev_list and calls ->dellink().
[ device B is not yet unlinked from netns B
as unregister_netdevice_many() has not been called. ]
3. gtp_net_exit_batch_rtnl() finds the device B while iterating
netns B's for_each_netdev() and calls ->dellink().
gtp_dellink() cleans up the device's hash table, unlinks the dev from
gn->gtp_dev_list, and calls unregister_netdevice_queue().
Basically, calling gtp_dellink() multiple times is fine unless
CONFIG_DEBUG_LIST is enabled.
Let's remove for_each_netdev() in gtp_net_exit_batch_rtnl() and
delegate the destruction to default_device_exit_batch() as done
in bareudp.
Linus Torvalds [Thu, 20 Feb 2025 02:11:28 +0000 (18:11 -0800)]
Merge tag 'mm-hotfixes-stable-2025-02-19-17-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"18 hotfixes. 5 are cc:stable and the remainder address post-6.13
issues or aren't considered necessary for -stable kernels.
10 are for MM and 8 are for non-MM. All are singletons, please see the
changelogs for details"
* tag 'mm-hotfixes-stable-2025-02-19-17-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
test_xarray: fix failure in check_pause when CONFIG_XARRAY_MULTI is not defined
kasan: don't call find_vm_area() in a PREEMPT_RT kernel
MAINTAINERS: update Nick's contact info
selftests/mm: fix check for running THP tests
mm: hugetlb: avoid fallback for specific node allocation of 1G pages
memcg: avoid dead loop when setting memory.max
mailmap: update Nick's entry
mm: pgtable: fix incorrect reclaim of non-empty PTE pages
taskstats: modify taskstats version
getdelays: fix error format characters
mm/migrate_device: don't add folio to be freed to LRU in migrate_device_finalize()
tools/mm: fix build warnings with musl-libc
mailmap: add entry for Feng Tang
.mailmap: add entries for Jeff Johnson
mm,madvise,hugetlb: check for 0-length range after end address adjustment
mm/zswap: fix inconsistency when zswap_store_page() fails
lib/iov_iter: fix import_iovec_ubuf iovec management
procfs: fix a locking bug in a vmcore_add_device_dump() error path
We had some error handling confusion here;
-BCH_ERR_missing_indirect_extent is thrown by
trans_trigger_reflink_p_segment(); at this point we haven't decide
whether we're generating an error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Thu, 13 Feb 2025 17:43:42 +0000 (12:43 -0500)]
bcachefs: Fix fsck directory i_size checking
Error handling was wrong, causing unhandled transaction restart errors.
check_directory_size() was also inefficient, since keys in multiple
snapshots would be iterated over once for every snapshot. Convert it to
the same scheme used for i_sectors and subdir count checking.
Cc: Hongbo Li <lihongbo22@huawei.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
cifs: Treat unhandled directory name surrogate reparse points as mount directory nodes
If the reparse point was not handled (indicated by the -EOPNOTSUPP from
ops->parse_reparse_point() call) but reparse tag is of type name surrogate
directory type, then treat is as a new mount point.
Name surrogate reparse point represents another named entity in the system.
From SMB client point of view, this another entity is resolved on the SMB
server, and server serves its content automatically. Therefore from Linux
client point of view, this name surrogate reparse point of directory type
crosses mount point.
Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Steve French [Mon, 17 Feb 2025 04:17:54 +0000 (22:17 -0600)]
smb311: failure to open files of length 1040 when mounting with SMB3.1.1 POSIX extensions
If a file size has bits 0x410 = ATTR_DIRECTORY | ATTR_REPARSE set
then during queryinfo (stat) the file is regarded as a directory
and subsequent opens can fail. A simple test example is trying
to open any file 1040 bytes long when mounting with "posix"
(SMB3.1.1 POSIX/Linux Extensions).
The cause of this bug is that Attributes field in smb2_file_all_info
struct occupies the same place that EndOfFile field in
smb311_posix_qinfo, and sometimes the latter struct is incorrectly
processed as if it was the first one.
Reported-by: Oleh Nykyforchyn <oleh.nyk@gmail.com> Tested-by: Oleh Nykyforchyn <oleh.nyk@gmail.com> Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
So, in order to avoid ending up with flexible-array members in the
middle of other structs, we use the `__struct_group()` helper to
separate the flexible arrays from the rest of the members in the
flexible structures. We then use the newly created tagged `struct
smb2_file_link_info_hdr` and `struct smb2_file_rename_info_hdr`
to replace the type of the objects causing trouble: `rename_info`
and `link_info` in `struct smb2_compound_vars`.
We also want to ensure that when new members need to be added to the
flexible structures, they are always included within the newly created
tagged structs. For this, we use `static_assert()`. This ensures that the
memory layout for both the flexible structure and the new tagged struct
is the same after any changes.
So, with these changes, fix 86 of the following warnings:
fs/smb/client/cifsglob.h:2335:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
fs/smb/client/cifsglob.h:2334:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
====================
net: Fix race of rtnl_net_lock(dev_net(dev)).
Yael Chemla reported that commit 7fb1073300a2 ("net: Hold rtnl_net_lock()
in (un)?register_netdevice_notifier_dev_net().") started to trigger KASAN's
use-after-free splat.
The problem is that dev_net(dev) fetched before rtnl_net_lock() might be
different after rtnl_net_lock().
The patch 2 fixes the issue by checking dev_net(dev) after rtnl_net_lock(),
and the patch 3 fixes the same potential issue that would emerge once RTNL
is removed.
Kory Maincent [Mon, 17 Feb 2025 13:48:11 +0000 (14:48 +0100)]
net: pse-pd: pd692x0: Fix power limit retrieval
Fix incorrect data offset read in the pd692x0_pi_get_pw_limit callback.
The issue was previously unnoticed as it was only used by the regulator
API and not thoroughly tested, since the PSE is mainly controlled via
ethtool.
The function became actively used by ethtool after commit 3e9dbfec4998
("net: pse-pd: Split ethtool_get_status into multiple callbacks"),
which led to the discovery of this issue.
Jakub Kicinski [Sat, 15 Feb 2025 16:26:46 +0000 (08:26 -0800)]
MAINTAINERS: trim the GVE entry
We requested in the past that GVE patches coming out of Google should
be submitted only by GVE maintainers. There were too many patches
posted which didn't follow the subsystem guidance.
Recently Joshua was added to maintainers, but even tho he was asked
to follow the netdev "FAQ" in the past [1] he does not follow
the local customs. It is not reasonable for a person who hasn't read
the maintainer entry for the subsystem to be a driver maintainer.
We can re-add once Joshua does some on-list reviews to prove
the fluency with the upstream process.
Joshua Washington [Fri, 14 Feb 2025 22:43:59 +0000 (14:43 -0800)]
gve: set xdp redirect target only when it is available
Before this patch the NETDEV_XDP_ACT_NDO_XMIT XDP feature flag is set by
default as part of driver initialization, and is never cleared. However,
this flag differs from others in that it is used as an indicator for
whether the driver is ready to perform the ndo_xdp_xmit operation as
part of an XDP_REDIRECT. Kernel helpers
xdp_features_(set|clear)_redirect_target exist to convey this meaning.
This patch ensures that the netdev is only reported as a redirect target
when XDP queues exist to forward traffic.
Fixes: 39a7f4aa3e4a ("gve: Add XDP REDIRECT support for GQI-QPL format") Cc: stable@vger.kernel.org Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by: Jeroen de Borst <jeroendb@google.com> Signed-off-by: Joshua Washington <joshwash@google.com> Link: https://patch.msgid.link/20250214224417.1237818-1-joshwash@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
bpf: skip non exist keys in generic_map_lookup_batch
The generic_map_lookup_batch currently returns EINTR if it fails with
ENOENT and retries several times on bpf_map_copy_value. The next batch
would start from the same location, presuming it's a transient issue.
This is incorrect if a map can actually have "holes", i.e.
"get_next_key" can return a key that does not point to a valid value. At
least the array of maps type may contain such holes legitly. Right now
these holes show up, generic batch lookup cannot proceed any more. It
will always fail with EINTR errors.
This patch fixes this behavior by skipping the non-existing key, and
does not return EINTR any more.
V2->V3: deleted a unused macro
V1->V2: split the fix and selftests; fixed a few selftests issues.
Yan Zhai [Mon, 10 Feb 2025 07:22:35 +0000 (23:22 -0800)]
bpf: skip non exist keys in generic_map_lookup_batch
The generic_map_lookup_batch currently returns EINTR if it fails with
ENOENT and retries several times on bpf_map_copy_value. The next batch
would start from the same location, presuming it's a transient issue.
This is incorrect if a map can actually have "holes", i.e.
"get_next_key" can return a key that does not point to a valid value. At
least the array of maps type may contain such holes legitly. Right now
these holes show up, generic batch lookup cannot proceed any more. It
will always fail with EINTR errors.
Rather, do not retry in generic_map_lookup_batch. If it finds a non
existing element, skip to the next key. This simple solution comes with
a price that transient errors may not be recovered, and the iteration
might cycle back to the first key under parallel deletion. For example,
Hou Tao <houtao@huaweicloud.com> pointed out a following scenario:
For LPM trie map:
(1) ->map_get_next_key(map, prev_key, key) returns a valid key
(2) bpf_map_copy_value() return -ENOMENT
It means the key must be deleted concurrently.
(3) goto next_key
It swaps the prev_key and key
(4) ->map_get_next_key(map, prev_key, key) again
prev_key points to a non-existing key, for LPM trie it will treat just
like prev_key=NULL case, the returned key will be duplicated.
With the retry logic, the iteration can continue to the key next to the
deleted one. But if we directly skip to the next key, the iteration loop
would restart from the first key for the lpm_trie type.
However, not all races may be recovered. For example, if current key is
deleted after instead of before bpf_map_copy_value, or if the prev_key
also gets deleted, then the loop will still restart from the first key
for lpm_tire anyway. For generic lookup it might be better to stay
simple, i.e. just skip to the next key. To guarantee that the output
keys are not duplicated, it is better to implement map type specific
batch operations, which can properly lock the trie and synchronize with
concurrent mutators.
Jakub Kicinski [Mon, 17 Feb 2025 23:29:05 +0000 (15:29 -0800)]
tcp: adjust rcvq_space after updating scaling ratio
Since commit under Fixes we set the window clamp in accordance
to newly measured rcvbuf scaling_ratio. If the scaling_ratio
decreased significantly we may put ourselves in a situation
where windows become smaller than rcvq_space, preventing
tcp_rcv_space_adjust() from increasing rcvbuf.
The significant decrease of scaling_ratio is far more likely
since commit 697a6c8cec03 ("tcp: increase the default TCP scaling ratio"),
which increased the "default" scaling ratio from ~30% to 50%.
Hitting the bad condition depends a lot on TCP tuning, and
drivers at play. One of Meta's workloads hits it reliably
under following conditions:
- default rcvbuf of 125k
- sender MTU 1500, receiver MTU 5000
- driver settles on scaling_ratio of 78 for the config above.
Initial rcvq_space gets calculated as TCP_INIT_CWND * tp->advmss
(10 * 5k = 50k). Once we find out the true scaling ratio and
MSS we clamp the windows to 38k. Triggering the condition also
depends on the message sequence of this workload. I can't repro
the problem with simple iperf or TCP_RR-style tests.
Linus Torvalds [Tue, 18 Feb 2025 17:00:31 +0000 (09:00 -0800)]
Merge tag 'sound-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A slightly large collection of fixes, spread over various drivers.
Almost all are small and device-specific fixes and quirks in ASoC SOF
Intel and AMD, Renesas, Cirrus, HD-audio, in addition to a small fix
for MIDI 2.0"
* tag 'sound-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (41 commits)
ALSA: seq: Drop UMP events when no UMP-conversion is set
ALSA: hda/conexant: Add quirk for HP ProBook 450 G4 mute LED
ALSA: hda/cirrus: Reduce codec resume time
ALSA: hda/cirrus: Correct the full scale volume set logic
virtio_snd.h: clarify that `controls` depends on VIRTIO_SND_F_CTLS
ALSA: hda: Add error check for snd_ctl_rename_id() in snd_hda_create_dig_out_ctls()
ALSA: hda/tas2781: Fix index issue in tas2781 hda SPI driver
ASoC: imx-audmix: remove cpu_mclk which is from cpu dai device
ALSA: hda/realtek: Fixup ALC225 depop procedure
ALSA: hda/tas2781: Update tas2781 hda SPI driver
ASoC: cs35l41: Fix acpi_device_hid() not found
ASoC: SOF: amd: Add branch prediction hint in ACP IRQ handler
ASoC: SOF: amd: Handle IPC replies before FW_BOOT_COMPLETE
ASoC: SOF: amd: Drop unused includes from Vangogh driver
ASoC: SOF: amd: Add post_fw_run_delay ACP quirk
ASoC: Intel: soc-acpi-intel-ptl-match: revise typo of rt713_vb_l2_rt1320_l13
ASoC: Intel: soc-acpi-intel-ptl-match: revise typo of rt712_vb + rt1320 support
ALSA: Switch to use hrtimer_setup()
ALSA: hda: hda-intel: add Panther Lake-H support
ASoC: SOF: Intel: pci-ptl: Add support for PTL-H
...
This bug, similarly to commit f6abafcd32f9 ("vsock/bpf: return early if
transport is not assigned"), could be fixed with a single NULL check. But
instead, let's explore another approach: take a hint from
vsock_bpf_update_proto() and teach sockmap to accept only vsocks that are
already connected (no risk of transport being dropped or reassigned). At
the same time straight reject the listeners (vsock listening sockets do not
carry any transport anyway). This way BPF does not have to worry about
vsk->transport becoming NULL.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
====================
Michal Luczaj [Thu, 13 Feb 2025 11:58:52 +0000 (12:58 +0100)]
selftest/bpf: Add vsock test for sockmap rejecting unconnected
Verify that for a connectible AF_VSOCK socket, merely having a transport
assigned is insufficient; socket must be connected for the sockmap to
accept.
This does not test datagram vsocks. Even though it hardly matters. VMCI is
the only transport that features VSOCK_TRANSPORT_F_DGRAM, but it has an
unimplemented vsock_transport::readskb() callback, making it unsupported by
BPF/sockmap.
Signed-off-by: Michal Luczaj <mhal@rbox.co> Acked-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Michal Luczaj [Thu, 13 Feb 2025 11:58:51 +0000 (12:58 +0100)]
selftest/bpf: Adapt vsock_delete_on_close to sockmap rejecting unconnected
Commit 515745445e92 ("selftest/bpf: Add test for vsock removal from sockmap
on close()") added test that checked if proto::close() callback was invoked
on AF_VSOCK socket release. I.e. it verified that a close()d vsock does
indeed get removed from the sockmap.
It was done simply by creating a socket pair and attempting to replace a
close()d one with its peer. Since, due to a recent change, sockmap does not
allow updating index with a non-established connectible vsock, redo it with
a freshly established one.
Signed-off-by: Michal Luczaj <mhal@rbox.co> Acked-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Michal Luczaj [Thu, 13 Feb 2025 11:58:49 +0000 (12:58 +0100)]
sockmap, vsock: For connectible sockets allow only connected
sockmap expects all vsocks to have a transport assigned, which is expressed
in vsock_proto::psock_update_sk_prot(). However, there is an edge case
where an unconnected (connectible) socket may lose its previously assigned
transport. This is handled with a NULL check in the vsock/BPF recv path.
Another design detail is that listening vsocks are not supposed to have any
transport assigned at all. Which implies they are not supported by the
sockmap. But this is complicated by the fact that a socket, before
switching to TCP_LISTEN, may have had some transport assigned during a
failed connect() attempt. Hence, we may end up with a listening vsock in a
sockmap, which blows up quickly:
For connectible sockets, instead of relying solely on the state of
vsk->transport, tell sockmap to only allow those representing established
connections. This aligns with the behaviour for AF_INET and AF_UNIX.
Fixes: 634f1a7110b4 ("vsock: support sockmap") Signed-off-by: Michal Luczaj <mhal@rbox.co> Acked-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Kemeng Shi [Thu, 13 Feb 2025 16:36:59 +0000 (00:36 +0800)]
test_xarray: fix failure in check_pause when CONFIG_XARRAY_MULTI is not defined
In case CONFIG_XARRAY_MULTI is not defined, xa_store_order can store a
multi-index entry but xas_for_each can't tell sbiling entry from valid
entry. So the check_pause failed when we store a multi-index entry and
wish xas_for_each can handle it normally. Avoid to store multi-index
entry when CONFIG_XARRAY_MULTI is disabled to fix the failure.
Link: https://lkml.kernel.org/r/20250213163659.414309-1-shikemeng@huaweicloud.com Fixes: c9ba5249ef8b ("Xarray: move forward index correctly in xas_pause()") Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Closes: https://lore.kernel.org/r/CAMuHMdU_bfadUO=0OZ=AoQ9EAmQPA4wsLCBqohXR+QCeCKRn4A@mail.gmail.com Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since commit e30a0361b851 ("kasan: make report_lock a raw spinlock"),
report_lock was changed to raw_spinlock_t to fix another similar
PREEMPT_RT problem. That alone isn't enough to cover other corner cases.
print_address_description() is always invoked under the report_lock. The
context under this lock is always atomic even on PREEMPT_RT.
find_vm_area() acquires vmap_node::busy.lock which is a spinlock_t,
becoming a sleeping lock on PREEMPT_RT and must not be acquired in atomic
context.
Don't invoke find_vm_area() on PREEMPT_RT and just print the address.
Non-PREEMPT_RT builds remain unchanged. Add a DEFINE_WAIT_OVERRIDE_MAP()
macro to tell lockdep that this lock nesting is allowed because the
PREEMPT_RT part (which is invalid) has been taken care of. This macro was
first introduced in commit 0cce06ba859a ("debugobjects,locking: Annotate
debug_object_fill_pool() wait type violation").
Link: https://lkml.kernel.org/r/20250217204402.60533-1-longman@redhat.com Fixes: e30a0361b851 ("kasan: make report_lock a raw spinlock") Signed-off-by: Waiman Long <longman@redhat.com> Suggested-by: Andrey Konovalov <andreyknvl@gmail.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mariano Pache <npache@redhat.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mark Brown [Wed, 12 Feb 2025 17:44:25 +0000 (17:44 +0000)]
selftests/mm: fix check for running THP tests
When testing if we should try to compact memory or drop caches before we
run the THP or HugeTLB tests we use | as an or operator. This doesn't
work since run_vmtests.sh is written in shell where this is used to pipe
the output of the first argument into the second. Instead use the shell's
-o operator.
Link: https://lkml.kernel.org/r/20250212-kselftest-mm-no-hugepages-v1-1-44702f538522@kernel.org Fixes: b433ffa8dbac ("selftests: mm: perform some system cleanup before using hugepages") Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Nico Pache <npache@redhat.com> Cc: Mariano Pache <npache@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Luiz Capitulino [Tue, 11 Feb 2025 03:48:56 +0000 (22:48 -0500)]
mm: hugetlb: avoid fallback for specific node allocation of 1G pages
When using the HugeTLB kernel command-line to allocate 1G pages from a
specific node, such as:
default_hugepagesz=1G hugepages=1:1
If node 1 happens to not have enough memory for the requested number of 1G
pages, the allocation falls back to other nodes. A quick way to reproduce
this is by creating a KVM guest with a memory-less node and trying to
allocate 1 1G page from it. Instead of failing, the allocation will
fallback to other nodes.
This defeats the purpose of node specific allocation. Also, specific node
allocation for 2M pages don't have this behavior: the allocation will just
fail for the pages it can't satisfy.
This issue happens because HugeTLB calls memblock_alloc_try_nid_raw() for
1G boot-time allocation as this function falls back to other nodes if the
allocation can't be satisfied. Use memblock_alloc_exact_nid_raw()
instead, which ensures that the allocation will only be satisfied from the
specified node.
Link: https://lkml.kernel.org/r/20250211034856.629371-1-luizcap@redhat.com Fixes: b5389086ad7b ("hugetlbfs: extend the definition of hugepages parameter to support node allocation") Signed-off-by: Luiz Capitulino <luizcap@redhat.com> Acked-by: Oscar Salvador <osalvador@suse.de> Acked-by: David Hildenbrand <david@redhat.com> Cc: "Mike Rapoport (IBM)" <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Zhenguo Yao <yaozhenguo1@gmail.com> Cc: Frank van der Linden <fvdl@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The stress test involves CPU hotplug operations and memory control group
(memcg) operations. The scenario can be described as follows:
echo xx > memory.max cache_ap_online oom_reaper
(CPU23) (CPU50)
xx < usage stop_machine_from_inactive_cpu
for(;;) // all active cpus
trigger OOM queue_stop_cpus_work
// waiting oom_reaper
multi_cpu_stop(migration/xx)
// sync all active cpus ack
// waiting cpu23 ack
// CPU50 loops in multi_cpu_stop
waiting cpu50
Detailed explanation:
1. When the usage is larger than xx, an OOM may be triggered. If the
process does not handle with ths kill signal immediately, it will loop
in the memory_max_write.
2. When cache_ap_online is triggered, the multi_cpu_stop is queued to the
active cpus. Within the multi_cpu_stop function, it attempts to
synchronize the CPU states. However, the CPU23 didn't acknowledge
because it is stuck in a loop within the for(;;).
3. The oom_reaper process is blocked because CPU50 is in a loop, waiting
for CPU23 to acknowledge the synchronization request.
4. Finally, it formed cyclic dependency and lead to softlockup and dead
loop.
To fix this issue, add cond_resched() in the memory_max_write, so that it
will not block migration task.
Link: https://lkml.kernel.org/r/20250211081819.33307-1-chenridong@huaweicloud.com Fixes: b6e6edcfa405 ("mm: memcontrol: reclaim and OOM kill when shrinking memory.max below usage") Signed-off-by: Chen Ridong <chenridong@huawei.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Wang Weiyang <wangweiyang2@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Qi Zheng [Tue, 11 Feb 2025 07:26:25 +0000 (15:26 +0800)]
mm: pgtable: fix incorrect reclaim of non-empty PTE pages
In zap_pte_range(), if the pte lock was released midway, the pte entries
may be refilled with physical pages by another thread, which may cause a
non-empty PTE page to be reclaimed and eventually cause the system to
crash.
To fix it, fall back to the slow path in this case to recheck if all pte
entries are still none.
Link: https://lkml.kernel.org/r/20250211072625.89188-1-zhengqi.arch@bytedance.com Fixes: 6375e95f381e ("mm: pgtable: reclaim empty PTE page in madvise(MADV_DONTNEED)") Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reported-by: Christian Brauner <brauner@kernel.org> Closes: https://lore.kernel.org/all/20250207-anbot-bankfilialen-acce9d79a2c7@brauner/ Reported-by: Qu Wenruo <quwenruo.btrfs@gmx.com> Closes: https://lore.kernel.org/all/152296f3-5c81-4a94-97f3-004108fba7be@gmx.com/ Tested-by: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wang Yaxin [Sat, 8 Feb 2025 06:49:01 +0000 (14:49 +0800)]
taskstats: modify taskstats version
After adding "delay max" and "delay min" to the taskstats structure, the
taskstats version needs to be updated.
Link: https://lkml.kernel.org/r/20250208144901218Q5ptVpqsQkb2MOEmW4Ujn@zte.com.cn Fixes: f65c64f311ee ("delayacct: add delay min to record delay peak") Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn> Signed-off-by: Kun Jiang <jiang.kun2@zte.com.cn> Reviewed-by: xu xin <xu.xin16@zte.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wang Yaxin [Sat, 8 Feb 2025 06:44:00 +0000 (14:44 +0800)]
getdelays: fix error format characters
getdelays had a compilation issue because the format string was not
updated when the "delay min" was added. For example, after adding the
"delay min" in printf, there were 7 strings but only 6 "%s" format
specifiers. Similarly, after adding the 't->cpu_delay_total', there were
7 variables but only 6 format characters specifiers, causing compilation
issues as follows. This commit fixes these issues to ensure that
getdelays compiles correctly.
root@xx:~/linux-next/tools/accounting$ make
getdelays.c:199:9: warning: format `%llu' expects argument of type
`long long unsigned int', but argument 8 has type `char *' [-Wformat=]
199 | printf("\n\nCPU %15s%15s%15s%15s%15s%15s\n"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.....
216 | "delay total", "delay average", "delay max", "delay min",
| ~~~~~~~~~~~
| |
| char *
getdelays.c:200:21: note: format string is defined here
200 | " %15llu%15llu%15llu%15llu%15.3fms%13.6fms\n"
| ~~~~~^
| |
| long long unsigned int
| %15s
getdelays.c:199:9: warning: format `%f' expects argument of type
`double', but argument 12 has type `long long unsigned int' [-Wformat=]
199 | printf("\n\nCPU %15s%15s%15s%15s%15s%15s\n"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.....
220 | (unsigned long long)t->cpu_delay_total,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| long long unsigned int
.....
Link: https://lkml.kernel.org/r/20250208144400544RduNRhwIpT3m2JyRBqskZ@zte.com.cn Fixes: f65c64f311ee ("delayacct: add delay min to record delay peak") Reviewed-by: xu xin <xu.xin16@zte.com.cn> Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn> Signed-off-by: Kun Jiang <jiang.kun2@zte.com.cn> Cc: Balbir Singh <bsingharora@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Fan Yu <fan.yu9@zte.com.cn> Cc: Peilin He <he.peilin@zte.com.cn> Cc: Qiang Tu <tu.qiang35@zte.com.cn> Cc: wangyong <wang.yong12@zte.com.cn> Cc: ye xingchen <ye.xingchen@zte.com.cn> Cc: Yunkai Zhang <zhang.yunkai@zte.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Mon, 10 Feb 2025 16:13:17 +0000 (17:13 +0100)]
mm/migrate_device: don't add folio to be freed to LRU in migrate_device_finalize()
If migration succeeded, we called
folio_migrate_flags()->mem_cgroup_migrate() to migrate the memcg from the
old to the new folio. This will set memcg_data of the old folio to 0.
Similarly, if migration failed, memcg_data of the dst folio is left unset.
If we call folio_putback_lru() on such folios (memcg_data == 0), we will
add the folio to be freed to the LRU, making memcg code unhappy. Running
the hmm selftests:
Likely, nothing else goes wrong: putting the last folio reference will
remove the folio from the LRU again. So besides memcg complaining, adding
the folio to be freed to the LRU is just an unnecessary step.
The new flow resembles what we have in migrate_folio_move(): add the dst
to the lru, remove migration ptes, unlock and unref dst.
Link: https://lkml.kernel.org/r/20250210161317.717936-1-david@redhat.com Fixes: 8763cb45ab96 ("mm/migrate: new memory migration helper for use with device memory") Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm,madvise,hugetlb: check for 0-length range after end address adjustment
Add a sanity check to madvise_dontneed_free() to address a corner case in
madvise where a race condition causes the current vma being processed to
be backed by a different page size.
During a madvise(MADV_DONTNEED) call on a memory region registered with a
userfaultfd, there's a period of time where the process mm lock is
temporarily released in order to send a UFFD_EVENT_REMOVE and let
userspace handle the event. During this time, the vma covering the
current address range may change due to an explicit mmap done concurrently
by another thread.
If, after that change, the memory region, which was originally backed by
4KB pages, is now backed by hugepages, the end address is rounded down to
a hugepage boundary to avoid data loss (see "Fixes" below). This rounding
may cause the end address to be truncated to the same address as the
start.
Make this corner case follow the same semantics as in other similar cases
where the requested region has zero length (ie. return 0).
This will make madvise_walk_vmas() continue to the next vma in the range
(this time holding the process mm lock) which, due to the prev pointer
becoming stale because of the vma change, will be the same hugepage-backed
vma that was just checked before. The next time madvise_dontneed_free()
runs for this vma, if the start address isn't aligned to a hugepage
boundary, it'll return -EINVAL, which is also in line with the madvise
api.
From userspace perspective, madvise() will return EINVAL because the start
address isn't aligned according to the new vma alignment requirements
(hugepage), even though it was correctly page-aligned when the call was
issued.
Link: https://lkml.kernel.org/r/20250203075206.1452208-1-rcn@igalia.com Fixes: 8ebe0a5eaaeb ("mm,madvise,hugetlb: fix unexpected data loss with MADV_DONTNEED on hugetlbfs") Signed-off-by: Ricardo Cañuelo Navarro <rcn@igalia.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Florent Revest <revest@google.com> Cc: Rik van Riel <riel@surriel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Hyeonggon Yoo [Wed, 29 Jan 2025 10:08:44 +0000 (19:08 +0900)]
mm/zswap: fix inconsistency when zswap_store_page() fails
Commit b7c0ccdfbafd ("mm: zswap: support large folios in zswap_store()")
skips charging any zswap entries when it failed to zswap the entire folio.
However, when some base pages are zswapped but it failed to zswap the
entire folio, the zswap operation is rolled back. When freeing zswap
entries for those pages, zswap_entry_free() uncharges the zswap entries
that were not previously charged, causing zswap charging to become
inconsistent.
This inconsistency triggers two warnings with following steps:
# On a machine with 64GiB of RAM and 36GiB of zswap
$ stress-ng --bigheap 2 # wait until the OOM-killer kills stress-ng
$ sudo reboot
The two warnings are:
in mm/memcontrol.c:163, function obj_cgroup_release():
WARN_ON_ONCE(nr_bytes & (PAGE_SIZE - 1));
in mm/page_counter.c:60, function page_counter_cancel():
if (WARN_ONCE(new < 0, "page_counter underflow: %ld nr_pages=%lu\n",
new, nr_pages))
zswap_stored_pages also becomes inconsistent in the same way.
As suggested by Kanchana, increment zswap_stored_pages and charge zswap
entries within zswap_store_page() when it succeeds. This way,
zswap_entry_free() will decrement the counter and uncharge the entries
when it failed to zswap the entire folio.
While this could potentially be optimized by batching objcg charging and
incrementing the counter, let's focus on fixing the bug this time and
leave the optimization for later after some evaluation.
After resolving the inconsistency, the warnings disappear.
[42.hyeyoo@gmail.com: refactor zswap_store_page()] Link: https://lkml.kernel.org/r/20250131082037.2426-1-42.hyeyoo@gmail.com Link: https://lkml.kernel.org/r/20250129100844.2935-1-42.hyeyoo@gmail.com Fixes: b7c0ccdfbafd ("mm: zswap: support large folios in zswap_store()") Co-developed-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com> Signed-off-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com> Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Acked-by: Yosry Ahmed <yosry.ahmed@linux.dev> Acked-by: Nhat Pham <nphamcs@gmail.com> Cc: Chengming Zhou <chengming.zhou@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
import_iovec() says that it should always be fine to kfree the iovec
returned in @iovp regardless of the error code. __import_iovec_ubuf()
never reallocates it and thus should clear the pointer even in cases when
copy_iovec_*() fail.
Link: https://lkml.kernel.org/r/378ae26923ffc20fd5e41b4360d673bf47b1775b.1738332461.git.asml.silence@gmail.com Fixes: 3b2deb0e46da ("iov_iter: import single vector iovecs as ITER_UBUF") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Bart Van Assche [Wed, 29 Jan 2025 22:20:03 +0000 (14:20 -0800)]
procfs: fix a locking bug in a vmcore_add_device_dump() error path
Unlock vmcore_mutex when returning -EBUSY.
Link: https://lkml.kernel.org/r/20250129222003.1495713-1-bvanassche@acm.org Fixes: 0f3b1c40c652 ("fs/proc/vmcore: disallow vmcore modifications while the vmcore is open") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Baoquan he <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Nick Child [Fri, 14 Feb 2025 15:52:33 +0000 (09:52 -0600)]
ibmvnic: Don't reference skb after sending to VIOS
Previously, after successfully flushing the xmit buffer to VIOS,
the tx_bytes stat was incremented by the length of the skb.
It is invalid to access the skb memory after sending the buffer to
the VIOS because, at any point after sending, the VIOS can trigger
an interrupt to free this memory. A race between reading skb->len
and freeing the skb is possible (especially during LPM) and will
result in use-after-free:
==================================================================
BUG: KASAN: slab-use-after-free in ibmvnic_xmit+0x75c/0x1808 [ibmvnic]
Read of size 4 at addr c00000024eb48a70 by task hxecom/14495
<...>
Call Trace:
[c000000118f66cf0] [c0000000018cba6c] dump_stack_lvl+0x84/0xe8 (unreliable)
[c000000118f66d20] [c0000000006f0080] print_report+0x1a8/0x7f0
[c000000118f66df0] [c0000000006f08f0] kasan_report+0x128/0x1f8
[c000000118f66f00] [c0000000006f2868] __asan_load4+0xac/0xe0
[c000000118f66f20] [c0080000046eac84] ibmvnic_xmit+0x75c/0x1808 [ibmvnic]
[c000000118f67340] [c0000000014be168] dev_hard_start_xmit+0x150/0x358
<...>
Freed by task 0:
kasan_save_stack+0x34/0x68
kasan_save_track+0x2c/0x50
kasan_save_free_info+0x64/0x108
__kasan_mempool_poison_object+0x148/0x2d4
napi_skb_cache_put+0x5c/0x194
net_tx_action+0x154/0x5b8
handle_softirqs+0x20c/0x60c
do_softirq_own_stack+0x6c/0x88
<...>
The buggy address belongs to the object at c00000024eb48a00 which
belongs to the cache skbuff_head_cache of size 224
==================================================================
Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Nick Child <nnac123@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250214155233.235559-1-nnac123@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Julian Ruess [Fri, 14 Feb 2025 12:01:37 +0000 (13:01 +0100)]
s390/ism: add release function for struct device
According to device_release() in /drivers/base/core.c,
a device without a release function is a broken device
and must be fixed.
The current code directly frees the device after calling device_add()
without waiting for other kernel parts to release their references.
Thus, a reference could still be held to a struct device,
e.g., by sysfs, leading to potential use-after-free
issues if a proper release function is not set.
Fixes: 8c81ba20349d ("net/smc: De-tangle ism and smc device initialization") Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: Julian Ruess <julianr@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250214120137.563409-1-wintera@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If drop_monitor is built as a kernel module, syzkaller may have time
to send a netlink NET_DM_CMD_START message during the module loading.
This will call the net_dm_monitor_start() function that uses
a spinlock that has not yet been initialized.
To fix this, let's place resource initialization above the registration
of a generic netlink family.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with Syzkaller.
Fixes: 9a8afc8d3962 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol") Cc: stable@vger.kernel.org Signed-off-by: Ilia Gavrilov <Ilia.Gavrilov@infotecs.ru> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250213152054.2785669-1-Ilia.Gavrilov@infotecs.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Mon, 17 Feb 2025 18:38:25 +0000 (10:38 -0800)]
Merge tag 'vfs-6.14-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"It was reported that the acct(2) system call can be used to trigger a
NULL deref in cases where it is set to write to a file that triggers
an internal lookup.
This can e.g., happen when pointing acct(2) to /sys/power/resume. At
the point the where the write to this file happens the calling task
has already exited and called exit_fs() but an internal lookup might
be triggered through lookup_bdev(). This may trigger a NULL-deref when
accessing current->fs.
Reorganize the code so that the the final write happens from the
workqueue but with the caller's credentials. This preserves the
(strange) permission model and has almost no regression risk.
Also block access to kernel internal filesystems as well as procfs and
sysfs in the first place.
Various fixes for netfslib:
- Fix a number of read-retry hangs, including:
- Incorrect getting/putting of references on subreqs as we retry
them
- Failure to track whether a last old subrequest in a retried set
is superfluous
- Inconsistency in the usage of wait queues used for subrequests
(ie. using clear_and_wake_up_bit() whilst waiting on a private
waitqueue)
- Add stats counters for retries and publish in /proc/fs/netfs/stats.
This is not a fix per se, but is useful in debugging and shouldn't
otherwise change the operation of the code
- Fix the ordering of queuing subrequests with respect to setting the
request flag that says we've now queued them all"
* tag 'vfs-6.14-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs: Fix setting NETFS_RREQ_ALL_QUEUED to be after all subreqs queued
netfs: Add retry stat counters
netfs: Fix a number of read-retry hangs
acct: block access to kernel internal filesystems
acct: perform last write from workqueue
Linus Torvalds [Mon, 17 Feb 2025 18:32:19 +0000 (10:32 -0800)]
Merge tag 'powerpc-6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Couple of patches to fix KASAN failduring boot
- Fix to avoid warnings/errors when building with 4k page size
Thanks to Christophe Leroy, Ritesh Harjani (IBM), and Erhard Furtner
* tag 'powerpc-6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/code-patching: Fix KASAN hit by not flagging text patching area as VM_ALLOC
powerpc/64s: Rewrite __real_pte() and __rpte_to_hidx() as static inline
powerpc/code-patching: Disable KASAN report during patching via temporary mm
Takashi Iwai [Mon, 17 Feb 2025 17:00:30 +0000 (18:00 +0100)]
ALSA: seq: Drop UMP events when no UMP-conversion is set
When a destination client is a user client in the legacy MIDI mode and
it sets the no-UMP-conversion flag, currently the all UMP events are
still passed as-is. But this may confuse the user-space, because the
event packet size is different from the legacy mode.
Since we cannot handle UMP events in user clients unless it's running
in the UMP client mode, we should filter out those events instead of
accepting blindly. This patch addresses it by slightly adjusting the
conditions for UMP event handling at the event delivery time.
Paulo Alcantara [Sun, 16 Feb 2025 21:02:47 +0000 (18:02 -0300)]
smb: client: fix chmod(2) regression with ATTR_READONLY
When the user sets a file or directory as read-only (e.g. ~S_IWUGO),
the client will set the ATTR_READONLY attribute by sending an
SMB2_SET_INFO request to the server in cifs_setattr_{,nounix}(), but
cifsInodeInfo::cifsAttrs will be left unchanged as the client will
only update the new file attributes in the next call to
{smb311_posix,cifs}_get_inode_info() with the new metadata filled in
@data parameter.
Commit a18280e7fdea ("smb: cilent: set reparse mount points as
automounts") mistakenly removed the @data NULL check when calling
is_inode_cache_good(), which broke the above case as the new
ATTR_READONLY attribute would end up not being updated on files with a
read lease.
Fix this by updating the inode whenever we have cached metadata in
@data parameter.
Reported-by: Horst Reiterer <horst.reiterer@fabasoft.com> Closes: https://lore.kernel.org/r/85a16504e09147a195ac0aac1c801280@fabasoft.com Fixes: a18280e7fdea ("smb: cilent: set reparse mount points as automounts") Cc: stable@vger.kernel.org Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Linus Torvalds [Sun, 16 Feb 2025 20:58:51 +0000 (12:58 -0800)]
Merge tag 'kbuild-fixes-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix annoying logs when building tools in parallel
- Fix the Debian linux-headers package build again
- Fix the target triple detection for userspace programs on Clang
* tag 'kbuild-fixes-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: Fix a few typos in a comment
kbuild: userprogs: fix bitsize and target detection on clang
kbuild: fix linux-headers package build when $(CC) cannot link userspace
tools: fix annoying "mkdir -p ..." logs when building tools in parallel
Linus Torvalds [Sun, 16 Feb 2025 20:54:42 +0000 (12:54 -0800)]
Merge tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core api addition from Greg KH:
"Here is a driver core new api for 6.14-rc3 that is being added to
allow platform devices from stop being abused.
It adds a new 'faux_device' structure and bus and api to allow almost
a straight or simpler conversion from platform devices that were not
really a platform device. It also comes with a binding for rust, with
an example driver in rust showing how it's used.
I'm adding this now so that the patches that convert the different
drivers and subsystems can all start flowing into linux-next now
through their different development trees, in time for 6.15-rc1.
We have a number that are already reviewed and tested, but adding
those conversions now doesn't seem right. For now, no one is using
this, and it passes all build tests from 0-day and linux-next, so all
should be good"
* tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
rust/kernel: Add faux device bindings
driver core: add a faux bus for use when a simple device/bus is needed
Linus Torvalds [Sun, 16 Feb 2025 19:15:50 +0000 (11:15 -0800)]
Merge tag 'usb-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes, and new device ids, for
6.14-rc3. Lots of tiny stuff for reported problems, including:
- new device ids and quirks
- usb hub crash fix found by syzbot
- dwc2 driver fix
- dwc3 driver fixes
- uvc gadget driver fix
- cdc-acm driver fixes for a variety of different issues
- other tiny bugfixes
Almost all of these have been in linux-next this week, and all have
passed 0-day testing"
* tag 'usb-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
usb: typec: tcpm: PSSourceOffTimer timeout in PR_Swap enters ERROR_RECOVERY
usb: roles: set switch registered flag early on
usb: gadget: uvc: Fix unstarted kthread worker
USB: quirks: add USB_QUIRK_NO_LPM quirk for Teclast dist
usb: gadget: core: flush gadget workqueue after device removal
USB: gadget: f_midi: f_midi_complete to call queue_work
usb: core: fix pipe creation for get_bMaxPacketSize0
usb: dwc3: Fix timeout issue during controller enter/exit from halt state
USB: Add USB_QUIRK_NO_LPM quirk for sony xperia xz1 smartphone
USB: cdc-acm: Fill in Renesas R-Car D3 USB Download mode quirk
usb: cdc-acm: Fix handling of oversized fragments
usb: cdc-acm: Check control transfer buffer size before access
usb: xhci: Restore xhci_pci support for Renesas HCs
USB: pci-quirks: Fix HCCPARAMS register error for LS7A EHCI
USB: serial: option: drop MeiG Smart defines
USB: serial: option: fix Telit Cinterion FN990A name
USB: serial: option: add Telit Cinterion FN990B compositions
USB: serial: option: add MeiG Smart SLM828
usb: gadget: f_midi: fix MIDI Streaming descriptor lengths
usb: dwc2: gadget: remove of_node reference upon udc_stop
...
Linus Torvalds [Sun, 16 Feb 2025 18:41:50 +0000 (10:41 -0800)]
Merge tag 'perf_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fixes from Borislav Petkov:
- Explicitly clear DEBUGCTL.LBR to prevent LBRs continuing being
enabled after handoff to the OS
- Check CPUID(0x23) leaf and subleafs presence properly
- Remove the PEBS-via-PT feature from being supported on hybrid systems
- Fix perf record/top default commands on systems without a raw PMU
registered
* tag 'perf_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Ensure LBRs are disabled when a CPU is starting
perf/x86/intel: Fix ARCH_PERFMON_NUM_COUNTER_LEAF
perf/x86/intel: Clean up PEBS-via-PT on hybrid
perf/x86/rapl: Fix the error checking order
Linus Torvalds [Sun, 16 Feb 2025 18:25:12 +0000 (10:25 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Large set of fixes for vector handling, especially in the
interactions between host and guest state.
This fixes a number of bugs affecting actual deployments, and
greatly simplifies the FP/SIMD/SVE handling. Thanks to Mark Rutland
for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours
- Fix use of kernel VAs at EL2 when emulating timers with nVHE
- Small set of pKVM improvements and cleanups
x86:
- Fix broken SNP support with KVM module built-in, ensuring the PSP
module is initialized before KVM even when the module
infrastructure cannot be used to order initcalls
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being
emulated by KVM to fix a NULL pointer dereference
- Enter guest mode (L2) from KVM's perspective before initializing
the vCPU's nested NPT MMU so that the MMU is properly tagged for
L2, not L1
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as
the guest's value may be stale if a VM-Exit is handled in the
fastpath"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
x86/sev: Fix broken SNP support with KVM module built-in
KVM: SVM: Ensure PSP module is initialized if KVM module is built-in
crypto: ccp: Add external API interface for PSP module initialization
KVM: arm64: vgic: Hoist SGI/PPI alloc from vgic_init() to kvm_create_vgic()
KVM: arm64: timer: Drop warning on failed interrupt signalling
KVM: arm64: Fix alignment of kvm_hyp_memcache allocations
KVM: arm64: Convert timer offset VA when accessed in HYP code
KVM: arm64: Simplify warning in kvm_arch_vcpu_load_fp()
KVM: arm64: Eagerly switch ZCR_EL{1,2}
KVM: arm64: Mark some header functions as inline
KVM: arm64: Refactor exit handlers
KVM: arm64: Refactor CPTR trap deactivation
KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN
KVM: arm64: Remove VHE host restore of CPACR_EL1.ZEN
KVM: arm64: Remove host FPSIMD saving for non-protected KVM
KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state
KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop
KVM: nSVM: Enter guest mode before initializing nested NPT MMU
KVM: selftests: Add CPUID tests for Hyper-V features that need in-kernel APIC
KVM: selftests: Manage CPUID array in Hyper-V CPUID test's core helper
...
Linus Torvalds [Sun, 16 Feb 2025 18:19:41 +0000 (10:19 -0800)]
Merge tag 'mips-fixes_6.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
"Fix for o32 ptrace/get_syscall_info"
* tag 'mips-fixes_6.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: fix mips_get_syscall_arg() for o32
MIPS: Export syscall stack arguments properly for remote use
Linus Torvalds [Sun, 16 Feb 2025 01:14:53 +0000 (17:14 -0800)]
Merge tag 'uml-for-linus-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML fixes from Richard Weinberger:
- Align signal stack correctly
- Convert to raw spinlocks where needed (irq and virtio)
- FPU related fixes
* tag 'uml-for-linus-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: convert irq_lock to raw spinlock
um: virtio_uml: use raw spinlock
um: virt-pci: don't use kmalloc()
um: fix execve stub execution on old host OSs
um: properly align signal stack on x86_64
um: avoid copying FP state from init_task
um: add back support for FXSAVE registers
Linus Torvalds [Sun, 16 Feb 2025 00:34:41 +0000 (16:34 -0800)]
Merge tag 'trace-ring-buffer-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull trace ring buffer fixes from Steven Rostedt:
- Enable resize on mmap() error
When a process mmaps a ring buffer, its size is locked and resizing
is disabled. But if the user passes in a wrong parameter, the mmap()
can fail after the resize was disabled and the mmap() exits with
error without reenabling the ring buffer resize. This prevents the
ring buffer from ever being resized after that. Reenable resizing of
the ring buffer on mmap() error.
- Have resizing return proper error and not always -ENOMEM
If the ring buffer is mmapped by one task and another task tries to
resize the buffer it will error with -ENOMEM. This is confusing to
the user as there may be plenty of memory available. Have it return
the error that actually happens (in this case -EBUSY) where the user
can understand why the resize failed.
- Test the sub-buffer array to validate persistent memory buffer
On boot up, the initialization of the persistent memory buffer will
do a validation check to see if the content of the data is valid, and
if so, it will use the memory as is, otherwise it re-initializes it.
There's meta data in this persistent memory that keeps track of which
sub-buffer is the reader page and an array that states the order of
the sub-buffers. The values in this array are indexes into the
sub-buffers. The validator checks to make sure that all the entries
in the array are within the sub-buffer list index, but it does not
check for duplications.
While working on this code, the array got corrupted and had
duplicates, where not all the sub-buffers were accounted for. This
passed the validator as all entries were valid, but the link list was
incorrect and could have caused a crash. The corruption only produced
incorrect data, but it could have been more severe. To fix this,
create a bitmask that covers all the sub-buffer indexes and set it to
all zeros. While iterating the array checking the values of the array
content, have it set a bit corresponding to the index in the array.
If the bit was already set, then it is a duplicate and mark the
buffer as invalid and reset it.
- Prevent mmap()ing persistent ring buffer
The persistent ring buffer uses vmap() to map the persistent memory.
Currently, the mmap() logic only uses virt_to_page() to get the page
from the ring buffer memory and use that to map to user space. This
works because a normal ring buffer uses alloc_page() to allocate its
memory. But because the persistent ring buffer use vmap() it causes a
kernel crash.
Fixing this to work with vmap() is not hard, but since mmap() on
persistent memory buffers never worked, just have the mmap() return
-ENODEV (what was returned before mmap() for persistent memory ring
buffers, as they never supported mmap. Normal buffers will still
allow mmap(). Implementing mmap() for persistent memory ring buffers
can wait till the next merge window.
- Fix polling on persistent ring buffers
There's a "buffer_percent" option (default set to 50), that is used
to have reads of the ring buffer binary data block until the buffer
fills to that percentage. The field "pages_touched" is incremented
every time a new sub-buffer has content added to it. This field is
used in the calculations to determine the amount of content is in the
buffer and if it exceeds the "buffer_percent" then it will wake the
task polling on the buffer.
As persistent ring buffers can be created by the content from a
previous boot, the "pages_touched" field was not updated. This means
that if a task were to poll on the persistent buffer, it would block
even if the buffer was completely full. It would block even if the
"buffer_percent" was zero, because with "pages_touched" as zero, it
would be calculated as the buffer having no content. Update
pages_touched when initializing the persistent ring buffer from a
previous boot.
* tag 'trace-ring-buffer-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Update pages_touched to reflect persistent buffer content
tracing: Do not allow mmap() of persistent ring buffer
ring-buffer: Validate the persistent meta data subbuf array
tracing: Have the error of __tracing_resize_ring_buffer() passed to user
ring-buffer: Unlock resize on mmap error
Steven Rostedt [Fri, 14 Feb 2025 17:35:12 +0000 (12:35 -0500)]
ring-buffer: Update pages_touched to reflect persistent buffer content
The pages_touched field represents the number of subbuffers in the ring
buffer that have content that can be read. This is used in accounting of
"dirty_pages" and "buffer_percent" to allow the user to wait for the
buffer to be filled to a certain amount before it reads the buffer in
blocking mode.
The persistent buffer never updated this value so it was set to zero, and
this accounting would take it as it had no content. This would cause user
space to wait for content even though there's enough content in the ring
buffer that satisfies the buffer_percent.
Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Vincent Donnefort <vdonnefort@google.com> Link: https://lore.kernel.org/20250214123512.0631436e@gandalf.local.home Fixes: 5f3b6e839f3ce ("ring-buffer: Validate boot range memory events") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
But virt_to_page() does not work with vmap()'d memory which is what the
persistent ring buffer has. It is rather trivial to allow this, but for
now just disable mmap() of instances that have their ring buffer from the
reserve_mem option.
If an mmap() is performed on a persistent buffer it will return -ENODEV
just like it would if the .mmap field wasn't defined in the
file_operations structure.
Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Vincent Donnefort <vdonnefort@google.com> Link: https://lore.kernel.org/20250214115547.0d7287d3@gandalf.local.home Fixes: 9b7bdf6f6ece6 ("tracing: Have trace_printk not use binary prints if boot buffer") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Linus Torvalds [Sat, 15 Feb 2025 18:20:47 +0000 (10:20 -0800)]
Merge tag 'i2c-for-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"MAINTAINERS maintenance.
Changed email, added entry, deleted entry falling back to a generic
one"
* tag 'i2c-for-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Add maintainer for Qualcomm's I2C GENI driver
MAINTAINERS: delete entry for AXXIA I2C
MAINTAINERS: Use my kernel.org address for I2C ACPI work
Linus Torvalds [Sat, 15 Feb 2025 18:15:24 +0000 (10:15 -0800)]
Merge tag 's390-6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix isolated VFs handling by verifying that a VF’s parent PF is
locally owned before registering it in an existing PCI domain
- Disable arch_test_bit() optimization for PROFILE_ALL_BRANCHES to
workaround gcc failure in handling __builtin_constant_p() in this
case
- Fix CHPID "configure" attribute caching in CIO by not updating the
cache when SCLP returns no data, ensuring consistent sysfs output
- Remove CONFIG_LSM from default configs and rely on defaults, which
enables BPF LSM hook
* tag 's390-6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pci: Fix handling of isolated VFs
s390/pci: Pull search for parent PF out of zpci_iov_setup_virtfn()
s390/bitops: Disable arch_test_bit() optimization for PROFILE_ALL_BRANCHES
s390/cio: Fix CHPID "configure" attribute caching
s390/configs: Remove CONFIG_LSM
Thomas Weißschuh [Thu, 13 Feb 2025 14:55:17 +0000 (15:55 +0100)]
kbuild: userprogs: fix bitsize and target detection on clang
scripts/Makefile.clang was changed in the linked commit to move --target from
KBUILD_CFLAGS to KBUILD_CPPFLAGS, as that generally has a broader scope.
However that variable is not inspected by the userprogs logic,
breaking cross compilation on clang.
Use both variables to detect bitsize and target arguments for userprogs.
Linus Torvalds [Sat, 15 Feb 2025 17:54:46 +0000 (09:54 -0800)]
Merge tag 'rust-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
- Fix objtool warning due to future Rust 1.85.0 (to be released in a
few days)
- Clean future Rust 1.86.0 (to be released 2025-04-03) Clippy warning
* tag 'rust-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: rbtree: fix overindented list item
objtool/rust: add one more `noreturn` Rust function
which causes problems on 32-bit x86 configurations that have 64-bit
resource sizes:
x86_64-linux-ld: drivers/dma/tegra210-adma.o: in function `tegra_adma_probe':
tegra210-adma.c:(.text+0x1322): undefined reference to `__udivdi3'
because gcc doesn't generate the trivial code for a 64-by-32 divide,
turning it into a function call to do a full 64-by-64 divide. And the
kernel intentionally doesn't provide that helper function, because 99%
of the time all you want is the narrower version.
Of course, tegra210 is a 64-bit architecture and the 32-bit x86 build is
purely for build testing, so this really is just about build coverage
failure.
But build coverage is good.
Side note: div_u64() would be suboptimal if you actually have a 32-bit
resource_t, so our "helper" for divides are admittedly making it harder
than it should be to generate good code for all the possible cases.
At some point, I'll consider 32-bit x86 so entirely legacy that I can't
find it in myself to care any more, and we'll just add the __udivdi3
library function.
But for now, the right thing to do is to use "div_u64()" to show that
you know that you are doing the simpler divide with a 32-bit number.
And the build error enforces that.
While fixing the build issue, also check for division-by-zero, and for
overflow. Which hopefully cannot happen on real production hardware,
but the value of 'ch_base_offset' can definitely be zero in other
places.
tcf_exts_miss_cookie_base_alloc() calls xa_alloc_cyclic() which can
return 1 if the allocation succeeded after wrapping. This was treated as
an error, with value 1 returned to caller tcf_exts_init_ex() which sets
exts->actions to NULL and returns 1 to caller fl_change().
fl_change() treats err == 1 as success, calling tcf_exts_validate_ex()
which calls tcf_action_init() with exts->actions as argument, where it
is dereferenced.
Fixes: 80cd22c35c90 ("net/sched: cls_api: Support hardware miss to tc action") Signed-off-by: Pierre Riteau <pierre@stackhpc.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250213223610.320278-1-pierre@stackhpc.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Sat, 15 Feb 2025 16:13:45 +0000 (08:13 -0800)]
Merge tag 'gpio-fixes-for-v6.14-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix interrupt handling issues in gpio-bcm-kona
- add an ACPI quirk for Acer Nitro ANV14 fixing an issue with spurious
wake up events
- add missing return value checks to gpio-stmpe
- fix a crash in error path in gpiochip_get_ngpios()
* tag 'gpio-fixes-for-v6.14-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: Fix crash on error in gpiochip_get_ngpios()
gpio: stmpe: Check return value of stmpe_reg_read in stmpe_gpio_irq_sync_unlock
gpiolib: acpi: Add a quirk for Acer Nitro ANV14
gpio: bcm-kona: Add missing newline to dev_err format string
gpio: bcm-kona: Make sure GPIO bits are unlocked when requesting IRQ
gpio: bcm-kona: Fix GPIO lock/unlock for banks above bank 0
Masahiro Yamada [Thu, 13 Feb 2025 06:26:44 +0000 (15:26 +0900)]
kbuild: fix linux-headers package build when $(CC) cannot link userspace
Since commit 5f73e7d0386d ("kbuild: refactor cross-compiling
linux-headers package"), the linux-headers Debian package fails to
build when $(CC) cannot build userspace applications, for example,
when using toolchains installed by the 0day bot.
The host programs in the linux-headers package should be rebuilt using
the disto's cross-compiler, ${DEB_HOST_GNU_TYPE}-gcc instead of $(CC).
Hence, the variable 'CC' must be expanded in this shell script instead
of in the top-level Makefile.
Commit f354fc88a72a ("kbuild: install-extmod-build: add missing
quotation marks for CC variable") was not a correct fix because
CC="ccache gcc" should be unrelated when rebuilding userspace tools.
Fixes: 5f73e7d0386d ("kbuild: refactor cross-compiling linux-headers package") Reported-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Closes: https://lore.kernel.org/linux-kbuild/CAK7LNARb3xO3ptBWOMpwKcyf3=zkfhMey5H2KnB1dOmUwM79dA@mail.gmail.com/T/#t Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
projects / users / willy / pagecache.git / log