Thomas Huth [Mon, 9 Dec 2019 12:52:45 +0000 (13:52 +0100)]
hw/i386: Remove the deprecated machines 0.12 up to 0.15
These machines can't be used reliably for migration anymore, quoting
https://lists.gnu.org/archive/html/qemu-devel/2018-12/msg04516.html :
"
due to the introduction of the memory API, the firmware is not
migrated correctly from source to destination. On QEMU <1.3 the
0xf0000-0xfffff area is basically a copy of the higher
0xffff0000-0xffffffff area, while on more recent versions it is
initialized with zeroes and the firmware copies from 0xffff0000 to
0xf0000. When you migrate from old to new QEMU, after reboot there's
nothing at 0xf0000 and bugs ensue.
"
The pc-0.x machines have been marked as deprecated since QEMU v4.0, so
it is time to remove them now.
And while we're at it, mark the remaining pc-1.x machine types
as deprecated now, too, so that we finally only have "pc-i440fx"
and "pc-q35" machine types left (apart from the non-versioned
"isapc" and "microvm") once we remove them in a couple of releases.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191209125248.5849-2-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Philippe Mathieu-Daudé [Mon, 9 Dec 2019 09:50:02 +0000 (10:50 +0100)]
hw/pci-host: Add Kconfig entry to select the IGD Passthrough Host Bridge
Add the XEN_IGD_PASSTHROUGH Kconfig option.
Xen build has that option selected by default. Non-Xen builds now
have to select this feature manually.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191209095002.32194-7-philmd@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Philippe Mathieu-Daudé [Mon, 9 Dec 2019 09:50:01 +0000 (10:50 +0100)]
hw/pci-host/i440fx: Extract the IGD passthrough host bridge device
We can use a i440FX without the IGD passthrough host bridge.
Extract it into a new file, 'hw/pci-host/xen_igd_pt.c'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191209095002.32194-6-philmd@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Philippe Mathieu-Daudé [Mon, 9 Dec 2019 09:50:00 +0000 (10:50 +0100)]
hw/pci-host/i440fx: Use definitions instead of magic values
Use definitions from "hw/pci/pci_regs.h".
This also helps when using git-grep.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191209095002.32194-5-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Philippe Mathieu-Daudé [Mon, 9 Dec 2019 09:49:59 +0000 (10:49 +0100)]
hw/pci-host/i440fx: Use size_t to iterate over ARRAY_SIZE()
We don't enforce the -Wsign-conversion CPPFLAG, but it doesn't hurt
to avoid this warning:
warning: implicit conversion changes signedness: 'int' to 'size_t' (aka 'unsigned long') [-Wsign-conversion]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191209095002.32194-4-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Philippe Mathieu-Daudé [Mon, 9 Dec 2019 09:49:58 +0000 (10:49 +0100)]
hw/pci-host/i440fx: Extract PCII440FXState to "hw/pci-host/i440fx.h"
Make the PCII440FXState structure public, so it can be used out of
this source file. This will allow us to extract the IGD Passthrough
Host Bridge, which is a children of the TYPE_I440FX_PCI_DEVICE.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191209095002.32194-3-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Philippe Mathieu-Daudé [Mon, 9 Dec 2019 09:49:57 +0000 (10:49 +0100)]
hw/pci-host/i440fx: Correct the header description
Missed during the refactor in commits 14a026dd58 and 0f25d865a,
this file is now only about the i440FX chipset.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191209095002.32194-2-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cameron Esfahani [Sat, 7 Dec 2019 02:33:30 +0000 (18:33 -0800)]
Fix some comment spelling errors.
Signed-off-by: Cameron Esfahani <dirty@apple.com>
Message-Id: <086c197db928384b8697edfa64755e2cb46c8100.1575685843.git.dirty@apple.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sunil Muthuswamy [Wed, 13 Nov 2019 18:54:39 +0000 (18:54 +0000)]
WHPX: refactor load library
This refactors the load library of WHV libraries to make it more
modular. It makes a helper routine that can be called on demand.
This allows future expansion of load library/functions to support
functionality that is dependent on some feature being available.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Message-Id: <MW2PR2101MB1116578040BE1F0C1B662318C0760@MW2PR2101MB1116.namprd21.prod.outlook.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wei Yang [Fri, 12 Jul 2019 03:27:04 +0000 (11:27 +0800)]
migration: check length directly to make sure the range is aligned
Since the start addr is already checked, to make sure the range is
aligned, checking the length is enough.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190712032704.7826-1-richardw.yang@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 29 Oct 2019 16:22:48 +0000 (17:22 +0100)]
memory: include MemoryListener documentation and some missing function parameters
These cover the remaining warnings from kernel-doc.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20191029162248.13383-7-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Maydell [Tue, 21 May 2019 12:25:15 +0000 (13:25 +0100)]
docs: Create bitops.rst as example of kernel-docs
Create a bitops.rst which is just a container for the
kernel-doc comments in qemu/bitops.h.
This is mostly a test of the kernel-doc extension machinery.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20190521122519.12573-7-peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Maydell [Tue, 21 May 2019 12:25:14 +0000 (13:25 +0100)]
bitops.h: Silence kernel-doc complaints
Fix the problems with kernel-doc/sphinx syntax in the
doc comments for the shuffle and unshuffle functions:
* mismatch between comment and prototype for argument name
* the inline bit patterns need to be marked up so they
are processed properly and rendered as monospace
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20190521122519.12573-6-peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Maydell [Tue, 21 May 2019 12:25:19 +0000 (13:25 +0100)]
Makefile: disable Sphinx nitpicking
Turn off Sphinx nitpicking as a temporary (?) measure so
sphinx builds complete even with warnings about missing
references.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20190521122519.12573-11-peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Maydell [Fri, 29 Nov 2019 13:16:12 +0000 (14:16 +0100)]
docs/conf.py: Enable use of kerneldoc sphinx extension
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20190521122519.12573-4-peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 29 Oct 2019 16:22:44 +0000 (17:22 +0100)]
docs: tweak kernel-doc for QEMU coding standards
Surprisingly, QEMU does have a pretty consistent doc comment style and
it is not very different from the Linux kernel's. Of the documentation
"sigils", only "#" separates the QEMU doc comment style from Linux's,
and it has 200+ instances vs. 6 for the kernel's '&struct foo' (all in
accel/tcg/translate-all.c), so it's clear that the two standards are
different in this respect. In addition, our structs are typedefed and
recognized by CamelCase names.
Adjust kernel-doc's parser for these two aspects of the QEMU coding
standards. The patch has been valid, with hardly any change, for over
two years, so it should not be an issue to keep kernel-doc in sync with
the Linux copy.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 29 Oct 2019 16:22:43 +0000 (17:22 +0100)]
docs: import Linux kernel-doc script and extension
Import Linux's kernel-doc script as of commit 15e2544ed38a1e, as well
as the Sphinx extension to call kernel-doc according to the arguments
and parameters given to a reStructuredText directive.
The kernel-doc extension accepts a filename, which is relative to
the QEMU source tree root. The extension also notifies Sphinx about the
document dependency on the file, causing the document to be rebuilt when
the file has been changed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dr. David Alan Gilbert [Fri, 13 Dec 2019 13:19:31 +0000 (13:19 +0000)]
qsp: Use WITH_RCU_READ_LOCK_GUARD
The automatic rcu read lock maintenance works quite
nicely in this case where it previously relied on a comment to
delimit the lifetime and now has a block.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Philippe Mathieu-Daudé [Fri, 13 Dec 2019 10:51:00 +0000 (11:51 +0100)]
hw/i386/pc: Extract the port92 device
This device is only used by the PC machines. The pc.c file is
already big enough, with 2255 lines. By removing 113 lines of
it, we reduced it by 5%. It is now a bit easier to navigate
the file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 13 Dec 2019 12:00:43 +0000 (13:00 +0100)]
hw/isa/isa-bus: cleanup irq functions
The irq number is unsigned; we reject negative values. But -1
is used for the isairq array, which is declared unsigned! And
since we have a definition for the number of ISA IRQs, use it.
Based on a patch by Philippe Mathieu-Daudé.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Philippe Mathieu-Daudé [Fri, 13 Dec 2019 11:11:45 +0000 (12:11 +0100)]
hw/i386: Simplify ioapic_init_gsi()
All callers of ioapic_init_gsi() provide a parent. We want new
uses to follow the same good practice and provide the parent
name, so do not make this optional: assert the parent name is
provided, and simplify the code.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 12 Dec 2019 13:12:27 +0000 (14:12 +0100)]
fw_cfg: allow building without other devices
The microvm machine type uses fw_cfg but lacks SMBIOS and ACPI. Do not
include the files if the symbol is not present in QEMU and remove
dependencies on machine-specific files.
Reviewed-by: Sergio Lopez <slp@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 6 Aug 2019 13:12:18 +0000 (15:12 +0200)]
stubs: replace stubs with lnot if applicable
The stubs mechanism relies on static libraries and compilation order,
which is a bit brittle and should be avoided unless necessary.
Replace it with Boolean operations on CONFIG_* symbols.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 29 Jul 2019 13:55:47 +0000 (15:55 +0200)]
crypto: move common bits for all emulators to libqemuutil
qcrypto_random_*, AES and qcrypto_init do not need to be linked as a whole
and are the only parts that are used by user-mode emulation. Place them
in libqemuutil, so that whatever needs them will pick them up automatically.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 29 Jul 2019 10:50:04 +0000 (12:50 +0200)]
libvixl: remove per-target compiler flags
We are already including -D__STDC_LIMIT_MACROS in the global CXXFLAGS,
so it makes sense to do the same for -D__STDC_CONSTANT_MACROS and
-D__STDC_FORMAT_MACROS instead of limiting that to libvixl.
The -Wno-sign-compare option can also be removed since GCC 4.6 is not
supported anymore.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Marc-André Lureau [Wed, 28 Aug 2019 08:18:06 +0000 (12:18 +0400)]
vhost-user-scsi: fix printf format warning
Fixes:
../contrib/vhost-user-scsi/vhost-user-scsi.c:118:57: error: format specifies
type 'unsigned char' but the argument has type 'int' [-Werror,-Wformat]
g_warning("Unable to determine cdb len (0x%02hhX)", cdb[0] >> 5);
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Marc-André Lureau [Fri, 4 Oct 2019 11:18:20 +0000 (15:18 +0400)]
monitor: fix maybe-uninitialized
../monitor/misc.c: In function ‘mon_get_cpu_sync’:
/home/elmarco/src/qq/include/sysemu/hw_accel.h:22:9: error: ‘cpu’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
22 | kvm_cpu_synchronize_state(cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../monitor/misc.c:397:15: note: ‘cpu’ was declared here
397 | CPUState *cpu;
| ^~~
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Marc-André Lureau [Fri, 4 Oct 2019 11:12:09 +0000 (15:12 +0400)]
migration: fix maybe-uninitialized warning
../migration/ram.c: In function ‘multifd_recv_thread’:
/home/elmarco/src/qq/include/qapi/error.h:165:5: error: ‘block’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
165 | error_setg_internal((errp), __FILE__, __LINE__, __func__, \
| ^~~~~~~~~~~~~~~~~~~
../migration/ram.c:818:15: note: ‘block’ was declared here
818 | RAMBlock *block;
| ^~~~~
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 11 Dec 2019 13:41:51 +0000 (14:41 +0100)]
build-sys: do not include Windows SLIRP dependencies in $LIBS
When including the internal SLIRP library, we should add all the libraries that
it needs for the build. Right now they are all included by QEMU, but -liphlpapi
is not needed without slirp. Move it from LIBS to slirp_libs.
Based on a patch by Marc-André Lureau.
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Greg Kurz [Wed, 11 Dec 2019 13:32:41 +0000 (14:32 +0100)]
object: Improve documentation of interfaces
QOM interfaces allow a limited form of multiple inheritance, at the
condition of being stateless. That is, they cannot be instantiated
and a pointer to an interface shouldn't be dereferenceable in any way.
This is achieved by making the QOM instance type an incomplete type,
which is, as mentioned by Markus Armbruster, the closest you can get
to abstract class in C.
Incomplete types are widely used to hide implementation details, but
people usually expect to find at least one place where the type is
fully defined. The fact that it doesn't happen with QOM interfaces is
quite disturbing, especially since it isn't documented anywhere as
recently discussed in this thread:
Paolo Bonzini [Wed, 13 Nov 2019 10:17:12 +0000 (11:17 +0100)]
kvm: introduce kvm_kernel_irqchip_* functions
The KVMState struct is opaque, so provide accessors for the fields
that will be moved from current_machine to the accelerator. For now
they just forward to the machine object, but this will change.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 13 Nov 2019 09:56:53 +0000 (10:56 +0100)]
xen: convert "-machine igd-passthru" to an accelerator property
The first machine property to fall is Xen's Intel integrated graphics
passthrough. The "-machine igd-passthru" option does not set anymore
a property on the machine object, but desugars to a GlobalProperty on
accelerator objects.
The setter is very simple, since the value ends up in a
global variable, so this patch also provides an example before the more
complicated cases that follow it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 13 Nov 2019 09:36:01 +0000 (10:36 +0100)]
tcg: convert "-accel threads" to a QOM property
Replace the ad-hoc qemu_tcg_configure with generic code invoking QOM
property getters and setters. More properties (and thus more valid
-accel suboptions) will be added in the next patches, which will move
accelerator-related "-machine" options to accelerators.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 13 Nov 2019 13:03:46 +0000 (14:03 +0100)]
accel: pass object to accel_init_machine
We will have to set QOM properties before accel_init_machine, based on the
options provided to -accel. Construct the object outside it so that it
will be possible to iterate on properties between object_new_with_class
and accel_init_machine.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 13 Nov 2019 12:57:55 +0000 (13:57 +0100)]
qom: add object_new_with_class
Similar to CPU and machine classes, "-accel" class names are mangled,
so we have to first get a class via accel_find and then instantiate it.
Provide a new function to instantiate a class without going through
object_class_get_name, and use it for CPUs and machines already.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 13 Nov 2019 12:33:44 +0000 (13:33 +0100)]
qom: introduce object_register_sugar_prop
Similar to the existing "-rtc driftfix" option, we will convert some
legacy "-machine" command line options to global properties on accelerators.
Because accelerators are not devices, we cannot use qdev_prop_register_global.
Instead, provide a slot in the generic object_compat_props arrays for
command line syntactic sugar.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 13 Nov 2019 09:10:47 +0000 (10:10 +0100)]
vl: configure accelerators from -accel options
Drop the "accel" property from MachineState, and instead desugar
"-machine accel=" to a list of "-accel" options.
This has a semantic change due to removing merge_lists from -accel.
For example:
- "-accel kvm -accel tcg" all but ignored "-accel kvm". This is a bugfix.
- "-accel kvm -accel thread=single" ignored "thread=single", since it
applied the option to KVM. Now it fails due to not specifying the
accelerator on "-accel thread=single".
- "-accel tcg -accel thread=single" chose single-threaded TCG, while now
it will fail due to not specifying the accelerator on "-accel
thread=single".
Also, "-machine accel" and "-accel" become incompatible.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 13 Nov 2019 10:44:48 +0000 (11:44 +0100)]
vl: introduce object_parse_property_opt
We will reuse the parsing loop of machine_set_property soon for "-accel",
but we do not want the "_" -> "-" conversion since "-accel" can just
standardize on dashes. We will also add a bunch of legacy option handling
to keep the QOM machine object clean. Extract the loop into a separate
function, and keep the legacy handling in machine_set_property.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 13 Nov 2019 08:59:04 +0000 (09:59 +0100)]
vl: merge -accel processing into configure_accelerators
The next step is to move the parsing of "-machine accel=..." into vl.c,
unifying it with the configure_accelerators() function that has just
been introduced. This way, we will be able to desugar it into multiple
"-accel" options, without polluting accel/accel.c.
The CONFIG_TCG and CONFIG_KVM symbols are not available in vl.c, but
we can use accel_find instead to find their value at runtime. Once we
know that the binary has one of TCG or KVM, the default accelerator
can be expressed simply as "tcg:kvm", because TCG never fails to initialize.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 14 Nov 2019 10:10:43 +0000 (11:10 +0100)]
vl: extract accelerator option processing to a separate function
As a first step towards supporting multiple "-accel" options, push the
late processing of -icount and -accel into a new function, and use
qemu_opts_foreach to retrieve -accel options instead of stashing
them into globals.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 14 Nov 2019 09:40:27 +0000 (10:40 +0100)]
tcg: move qemu_tcg_configure to accel/tcg/tcg-all.c
Move everything related to mttcg_enabled in accel/tcg/tcg-all.c,
which will make even more sense when "thread" becomes a QOM property.
For now, initializing mttcg_enabled in the instance_init function
prepares for the next patch, which will only invoke qemu_tcg_configure
when the command line includes a -accel option.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 13 Nov 2019 11:37:00 +0000 (12:37 +0100)]
vl: move icount configuration earlier
Once qemu_tcg_configure is turned into a QOM property setter, it will not
be able to set a default value for mttcg_enabled. Setting the default will
move to the TCG instance_init function, which currently runs before "-icount"
is processed.
However, it is harmless to do configure_icount for all accelerators; we will
just fail later if a non-TCG accelerator is selected. So do that.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 13 Nov 2019 10:50:03 +0000 (11:50 +0100)]
memory: do not look at current_machine->accel
"info mtree -f" prints the wrong accelerator name if used with for example
"-machine accel=kvm:tcg". The right thing to do is to fetch the name
from the AccelClass, which will also work nicely once
current_machine->accel stops existing.
Tested-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Juan Quintela [Thu, 12 Dec 2019 22:20:33 +0000 (23:20 +0100)]
migration-test: Use a struct for test_migrate_start parameters
It has two bools and two strings, it is very difficult to remember
which does what. And it makes very difficult to add new parameters as
we need to modify all the callers.
Juan Quintela [Thu, 12 Dec 2019 22:20:24 +0000 (23:20 +0100)]
migration-test: Create cmd_soure and cmd_target
We are repeating almost everything for each machine while creating the
command line for migration. And once for source and another for
destination. We start putting there opts_src and opts_dst.
Dr. David Alan Gilbert [Thu, 21 Nov 2019 16:56:45 +0000 (16:56 +0000)]
kvm: Reallocate dirty_bmap when we change a slot
kvm_set_phys_mem can be called to reallocate a slot by something the
guest does (e.g. writing to PAM and other chipset registers).
This can happen in the middle of a migration, and if we're unlucky
it can now happen between the split 'sync' and 'clear'; the clear
asserts if there's no bmap to clear. Recreate the bmap whenever
we change the slot, keeping the clear path happy.
Typically this is triggered by the guest rebooting during a migrate.
Corresponds to:
https://bugzilla.redhat.com/show_bug.cgi?id=1772774
https://bugzilla.redhat.com/show_bug.cgi?id=1771032
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
* remotes/huth-gitlab/tags/pull-request-2019-12-17:
tests: use g_test_rand_int
tests/Makefile: Fix check-report.* targets shown in check-help
glib: use portable g_setenv()
hw/misc/ivshmem: Bury dead legacy INTx code
pseries: disable migration-test if /dev/kvm cannot be used
tests: fix modules-test 'duplicate test case' error
Remove libbluetooth / bluez from the CI tests
Remove the core bluetooth code
hw/usb: Remove the USB bluetooth dongle device
hw/arm/nseries: Replace the bluetooth chardev with a "null" chardev
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 17 Dec 2019 14:34:31 +0000 (14:34 +0000)]
Merge remote-tracking branch 'remotes/cleber/tags/python-next-pull-request' into staging
Python queue 2019-12-17
# gpg: Signature made Tue 17 Dec 2019 05:12:43 GMT
# gpg: using RSA key 7ABB96EB8B46B94D5E0FE9BB657E8D33A5F209F3
# gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3
* remotes/cleber/tags/python-next-pull-request:
python/qemu: Remove unneeded imports in __init__
python/qemu: accel: Add tcg_available() method
python/qemu: accel: Strengthen kvm_available() checks
python/qemu: accel: Add list_accel() method
python/qemu: Move kvm_available() to its own module
Acceptance tests: use relative location for tests
Acceptance tests: use avocado tags for machine type
Acceptance tests: introduce utility method for tags unique vals
Acceptance test x86_cpu_model_versions: use default vm
tests/acceptance: Makes linux_initrd and empty_cpu_model use QEMUMachine
python/qemu: Add set_qmp_monitor() to QEMUMachine
analyze-migration.py: replace numpy with python 3.2
analyze-migration.py: fix find() type error
Revert "Acceptance test: cancel test if m68k kernel packages goes missing"
tests/boot_linux_console: Fetch assets from Debian snapshot archives
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/dgibson/tags/ppc-for-5.0-20191217: (88 commits)
pseries: Update SLOF firmware image
ppc/pnv: Drop PnvChipClass::type
ppc/pnv: Introduce PnvChipClass::xscom_pcba() method
ppc/pnv: Drop pnv_chip_is_power9() and pnv_chip_is_power10() helpers
ppc/pnv: Pass content of the "compatible" property to pnv_dt_xscom()
ppc/pnv: Pass XSCOM base address and address size to pnv_dt_xscom()
ppc/pnv: Introduce PnvChipClass::xscom_core_base() method
ppc/pnv: Introduce PnvChipClass::intc_print_info() method
ppc/pnv: Drop pnv_is_power9() and pnv_is_power10() helpers
ppc/pnv: Introduce PnvMachineClass::dt_power_mgt()
ppc/pnv: Introduce PnvMachineClass and PnvMachineClass::compat
ppc/pnv: Drop PnvPsiClass::chip_type
ppc/pnv: Introduce PnvPsiClass::compat
ppc: Drop useless extern annotation for functions
ppc/pnv: Fix OCC common area region mapping
ppc/pnv: Introduce PBA registers
ppc/pnv: Make PnvXScomInterface an incomplete type
ppc/pnv: populate the DT with realized XSCOM devices
ppc/pnv: Loop on the whole hierarchy to populate the DT with the XSCOM nodes
target/ppc: Add SPR TBU40
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 17 Dec 2019 10:57:07 +0000 (10:57 +0000)]
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-next-pull-request' into staging
x86 queue, 2019-12-16
Feature:
* Cooperlake CPU model
Cleanups:
* Use g_autofree in a few places
# gpg: Signature made Mon 16 Dec 2019 19:36:51 GMT
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-next-pull-request:
i386: Use g_autofree in a few places
i386: Add new CPU model Cooperlake
i386: Add macro for stibp
i386: Add MSR feature bit for MDS-NO
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Paolo Bonzini [Thu, 12 Dec 2019 01:17:58 +0000 (02:17 +0100)]
tests: use g_test_rand_int
g_test_rand_int provides a reproducible random integer number, using a
different number seed every time but allowing reproduction using the
--seed command line option. It is thus better suited to tests than
g_random_int or random.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1576113478-42926-1-git-send-email-pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
Wainer dos Santos Moschetta [Wed, 11 Dec 2019 20:44:27 +0000 (15:44 -0500)]
tests/Makefile: Fix check-report.* targets shown in check-help
The check-report.html and check-report.xml targets were replaced
with check-report.tap in commit 9df43317b82 but the check-help
text was not updated so it still lists check-report.html.
Fixes: 9df43317b82 Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20191211204427.4681-2-wainersm@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Markus Armbruster [Thu, 5 Dec 2019 20:35:57 +0000 (21:35 +0100)]
hw/misc/ivshmem: Bury dead legacy INTx code
Devices "ivshmem-plain" and "ivshmem-doorbell" support only MSI-X.
Config space register Interrupt Pin is zero. Device "ivshmem"
additionally supported legacy INTx, but it was removed in commit 5a0e75f0a9 "hw/misc/ivshmem: Remove deprecated "ivshmem" legacy
device". The commit left ivshmem_update_irq() behind. Since the
Interrupt Pin register is zero, the function does nothing. Remove it.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191205203557.11254-1-armbru@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Laurent Vivier [Wed, 20 Nov 2019 17:09:55 +0000 (18:09 +0100)]
pseries: disable migration-test if /dev/kvm cannot be used
On ppc64, migration-test only works with kvm_hv, and we already
have a check to verify the module is loaded.
kvm_hv module can be loaded in memory and /sys/module/kvm_hv exists,
but on some systems (like build systems) /dev/kvm can be missing
(by administrators choice).
And as kvm_hv exists test-migration is started but QEMU falls back to
TCG because it cannot be used:
Could not access KVM kernel module: No such file or directory
failed to initialize KVM: No such file or directory
Back to tcg accelerator
And as the test is done with TCG, it fails.
As for s390x, we must check for the existence and the access rights
of /dev/kvm.
Reported-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20191120170955.242900-1-lvivier@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Wed, 20 Nov 2019 09:10:13 +0000 (10:10 +0100)]
Remove the core bluetooth code
It's been deprecated since QEMU v3.1. We've explicitly asked in the
deprecation message that people should speak up on qemu-devel in case
they are still actively using the bluetooth part of QEMU, but nobody
ever replied that they are really still using it.
I've tried it on my own to use this bluetooth subsystem for one of my
guests, but I was also not able to get it running anymore: When I was
trying to pass-through a real bluetooth device, either the guest did
not see the device at all, or the guest crashed.
Even worse for the emulated device: When running
qemu-system-x86_64 -bt device:keyboard
QEMU crashes once you hit a key.
So it seems like the bluetooth stack is not only neglected, it is
completely bitrotten, as far as I can tell. The only attention that
this code got during the past years were some CVEs that have been
spotted there. So this code is a burden for the developers, without
any real benefit anymore. Time to remove it.
Note: hw/bt/Kconfig only gets cleared but not removed here yet.
Otherwise there is a problem with the *-softmmu/config-devices.mak.d
dependency files - they still contain a reference to this file which
gets evaluated first on some build hosts, before the file gets
properly recreated. To avoid breaking these builders, we still need
the file around for some time. It will get removed in a couple of
weeks instead.
Message-Id: <20191120091014.16883-4-thuth@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Alexey Kardashevskiy [Tue, 17 Dec 2019 00:31:54 +0000 (11:31 +1100)]
pseries: Update SLOF firmware image
This fixes PCI bridges support regression.
This enables IOMMU support in virtio drivers.
The full list of changes is:
Alexey Kardashevskiy (12):
allocator: Fix format strings for DEBUG
virtio: Make virtio_set_qaddr static
client: Load initramdisk location
sloffs: Fix -Wunused-result gcc warnings in read/write
pci-phb: Reimplement dma-map-in/out
virtio: Store queue descriptors in virtio_device
virtio-net: Init queues after features negotiation
virtio: Enable IOMMU
ibm,client-architecture-support: Fix stack handling
fdt: Fix updating the tree at H_CAS
version: update to 20191206
version: update to 20191217
Michael Roth (1):
dma: Define default dma methods for using by client/package instances
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Fri, 13 Dec 2019 12:00:41 +0000 (13:00 +0100)]
ppc/pnv: Drop PnvChipClass::type
It isn't used anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <157623844102.360005.12070225703151669294.stgit@bahia.lan> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The XSCOM bus is implemented with a QOM interface, which is mostly
generic from a CPU type standpoint, except for the computation of
addresses on the Pervasive Connect Bus (PCB) network. This is handled
by the pnv_xscom_pcba() function with a switch statement based on
the chip_type class level attribute of the CPU chip.
This can be achieved using QOM. Also the address argument is masked with
PNV_XSCOM_SIZE - 1, which is for POWER8 only. Addresses may have different
sizes with other CPU types. Have each CPU chip type handle the appropriate
computation with a QOM xscom_pcba() method.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <157623843543.360005.13996472463887521794.stgit@bahia.lan> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Fri, 13 Dec 2019 12:00:29 +0000 (13:00 +0100)]
ppc/pnv: Drop pnv_chip_is_power9() and pnv_chip_is_power10() helpers
They aren't used anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <157623842986.360005.1787401623906380181.stgit@bahia.lan> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Fri, 13 Dec 2019 12:00:24 +0000 (13:00 +0100)]
ppc/pnv: Pass content of the "compatible" property to pnv_dt_xscom()
Since pnv_dt_xscom() is called from chip specific dt_populate() hooks,
it shouldn't have to guess the chip type in order to populate the
"compatible" property. Just pass the compat string and its size as
arguments.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <157623842430.360005.9513965612524265862.stgit@bahia.lan> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
projects / users / dwmw2 / qemu.git / log