Josef Bacik [Tue, 13 Dec 2011 21:04:54 +0000 (16:04 -0500)]
Btrfs: only set cache_generation if we setup the block group
A user reported a problem booting into a new kernel with the old format inodes.
He was panicing in cow_file_range while writing out the inode cache. This is
because if the block group is not cached we'll just skip writing out the cache,
however if it gets dirtied again in the same transaction and it finished caching
we'd go ahead and write it out, but since we set cache_generation to the transid
we think we've already truncated it and will just carry on, running into
cow_file_range and blowing up. We need to make sure we only set
cache_generation if we've done the truncate. The user tested this patch and
verified that the panic no longer occured. Thanks,
Reported-and-Tested-by: Klaus Bitto <klaus.bitto@gmail.com> Signed-off-by: Josef Bacik <josef@redhat.com>
(cherry picked from commit e65cbb94e036058128a5dec6398be2fd64cf88ba)
Josef Bacik [Tue, 13 Dec 2011 17:55:58 +0000 (12:55 -0500)]
Btrfs: don't panic if orphan item already exists
I've been hitting this BUG_ON() in btrfs_orphan_add when running xfstest 269 in
a loop. This is because we will add an orphan item, do the truncate, the
truncate will fail for whatever reason (*cough*ENOSPC*cough*) and then we're
left with an orphan item still in the fs. Then we come back later to do another
truncate and it blows up because we already have an orphan item. This is ok so
just fix the BUG_ON() to only BUG() if ret is not EEXIST. Thanks,
Josef Bacik [Fri, 9 Dec 2011 18:26:22 +0000 (13:26 -0500)]
Btrfs: fix leaked space in truncate
We were occasionaly leaking space when running xfstest 269. This is because if
we failed to start the transaction in the truncate loop we'd just goto out, but
we need to break so that the inode is removed from the orphan list and the space
is properly freed. Thanks,
Josef Bacik [Fri, 9 Dec 2011 16:18:51 +0000 (11:18 -0500)]
Btrfs: fix how we do delalloc reservations and how we free reservations on error
Running xfstests 269 with some tracing my scripts kept spitting out errors about
releasing bytes that we didn't actually have reserved. This took me down a huge
rabbit hole and it turns out the way we deal with reserved_extents is wrong,
we need to only be setting it if the reservation succeeds, otherwise the free()
method will come in and unreserve space that isn't actually reserved yet, which
can lead to other warnings and such. The math was all working out right in the
end, but it caused all sorts of other issues in addition to making my scripts
yell and scream and generally make it impossible for me to track down the
original issue I was looking for. The other problem is with our error handling
in the reservation code. There are two cases that we need to deal with
1) We raced with free. In this case free won't free anything because csum_bytes
is modified before we dro the lock in our reservation path, so free rightly
doesn't release any space because the reservation code may be depending on that
reservation. However if we fail, we need the reservation side to do the free at
that point since that space is no longer in use. So as it stands the code was
doing this fine and it worked out, except in case #2
2) We don't race with free. Nobody comes in and changes anything, and our
reservation fails. In this case we didn't reserve anything anyway and we just
need to clean up csum_bytes but not free anything. So we keep track of
csum_bytes before we drop the lock and if it hasn't changed we know we can just
decrement csum_bytes and carry on.
Because of the case where we can race with free()'s since we have to drop our
spin_lock to do the reservation, I'm going to serialize all reservations with
the i_mutex. We already get this for free in the heavy use paths, truncate and
file write all hold the i_mutex, just needed to add it to page_mkwrite and
various ioctl/balance things. With this patch my space leak scripts no longer
scream bloody murder. Thanks,
Chris Mason [Fri, 16 Dec 2011 19:54:14 +0000 (14:54 -0500)]
Btrfs: deal with enospc from dirtying inodes properly
Now that we're properly keeping track of delayed inode space we've been getting
a lot of warnings out of btrfs_dirty_inode() when running xfstest 83. This is
because a bunch of people call mark_inode_dirty, which is void so we can't
return ENOSPC. This needs to be fixed in a few areas
1) file_update_time - this updates the mtime and such when writing to a file,
which will call mark_inode_dirty. So copy file_update_time into btrfs so we can
call btrfs_dirty_inode directly and return an error if we get one appropriately.
2) fix symlinks to use btrfs_setattr for ->setattr. For some reason we weren't
setting ->setattr for symlinks, even though we should have been. This catches
one of the cases where we were getting errors in mark_inode_dirty.
3) Fix btrfs_setattr and btrfs_setsize to call btrfs_dirty_inode directly
instead of mark_inode_dirty. This lets us return errors properly for truncate
and chown/anything related to setattr.
4) Add a new btrfs_fs_dirty_inode which will just call btrfs_dirty_inode and
print an error if we have one. The only remaining user we can't control for
this is touch_atime(), but we don't really want to keep people from walking
down the tree if we don't have space to save the atime update, so just complain
but don't worry about it.
With this patch xfstests 83 complains a handful of times instead of hundreds of
times. Thanks,
Josef Bacik [Fri, 18 Nov 2011 19:37:27 +0000 (14:37 -0500)]
Btrfs: fix num_workers_starting bug and other bugs in async thread
Al pointed out we have some random problems with the way we account for
num_workers_starting in the async thread stuff. First of all we need to make
sure to decrement num_workers_starting if we fail to start the worker, so make
__btrfs_start_workers do this. Also fix __btrfs_start_workers so that it
doesn't call btrfs_stop_workers(), there is no point in stopping everybody if we
failed to create a worker. Also check_pending_worker_creates needs to call
__btrfs_start_work in it's work function since it already increments
num_workers_starting.
People only start one worker at a time, so get rid of the num_workers argument
everywhere, and make btrfs_queue_worker a void since it will always succeed.
Thanks,
Casey Schaufler [Thu, 15 Dec 2011 15:09:07 +0000 (10:09 -0500)]
BTRFS: Establish i_ops before calling d_instantiate
The Smack LSM hook for security_d_instantiate checks
the inode's i_op->getxattr value to determine if the
containing filesystem supports extended attributes.
The BTRFS filesystem sets the inode's i_op value only
after it has instantiated the inode. This results in
Smack incorrectly giving new BTRFS inodes attributes
from the filesystem defaults on the assumption that
values can't be stored on the filesystem. This patch
moves the assignment of inode operation vectors ahead
of the calls to d_instantiate, letting Smack know that
the filesystem supports extended attributes. There
should be no impact on the performance or behavior of
BTRFS.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit ad19db71f498fd858dd84ce603efcf97e321f184)
Chris Mason [Thu, 15 Dec 2011 14:29:43 +0000 (09:29 -0500)]
Btrfs: add a cond_resched() into the worker loop
If we have a constant stream of end_io completions or crc work,
we can hit softlockup messages from the async helper threads. This
adds a cond_resched() into the loop to avoid them.
We should update ctime of in-memory inode before calling
btrfs_update_inode().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit 306424cc880a0fbbdc99eee1f43d056a301a180f)
Arne Jansen [Thu, 15 Dec 2011 01:12:02 +0000 (20:12 -0500)]
btrfs: keep orphans for subvolume deletion
Since we have the free space caches, btrfs_orphan_cleanup also runs for
the tree_root. Unfortunately this also cleans up the orphans used to mark
subvol deletions in progress.
Currently if a subvol deletion gets interrupted twice by umount/mount, the
deletion will not be continued and the space permanently lost, though it
would be possible to write a tool to recover those lost subvol deletions.
This patch checks if the orphan belongs to a subvol (dead root) and skips
the deletion.
Signed-off-by: Arne Jansen <sensille@gmx.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit f8e9e0b07be0464e12366631da3da73a1a62449c)
Miao Xie [Thu, 15 Dec 2011 01:12:02 +0000 (20:12 -0500)]
Btrfs: fix inaccurate available space on raid0 profile
When we use raid0 as the data profile, df command may show us a very
inaccurate value of the available space, which may be much less than the
real one. It may make the users puzzled. Fix it by changing the calculation
of the available space, and making it be more similar to a fake chunk
allocation.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit 39fb26c398ddf8d7794a85e896cfe1a42e55524b)
Miao Xie [Thu, 15 Dec 2011 01:12:02 +0000 (20:12 -0500)]
Btrfs: fix wrong disk space information of the files
Btrfsck report errors after the 83th case of xfstests was run, The error
number is 400, it means the used disk space of the file is wrong.
The reason of this bug is that:
The file truncation may fail when the space of the file system is not enough,
and leave some file extents, whose offset are beyond the end of the files.
When we want to expand those files, we will drop those file extents, and
put in dummy file extents, and then we should update the i-node. But btrfs
forgets to do it.
This patch adds the forgotten i-node update.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit 3642320e07444cc46327b24977d752f99706dac2)
Miao Xie [Thu, 15 Dec 2011 01:12:01 +0000 (20:12 -0500)]
Btrfs: fix wrong i_size when truncating a file to a larger size
Btrfsck report error 100 after the 83th case of xfstests was run, it means
the i_size of the file is wrong.
The reason of this bug is that:
Btrfs increased i_size of the file at the beginning, but it failed to expand
the file, and failed to update the i_size to the old size because there is no
enough space in the file system, so we found a wrong i_size.
This patch fixes this bug by updating the i_size just when we pass the file
expanding and get enough space to update i-node.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit f4a2f4c548296168832ad4ab7e7f7b0cd0bf1214)
Chris Mason [Fri, 9 Dec 2011 16:07:37 +0000 (11:07 -0500)]
Btrfs: fix btrfs_end_bio to deal with write errors to a single mirror
btrfs_end_bio checks the number of errors on a bio against the max
number of errors allowed before sending any EIOs up to the higher
levels.
If we got enough copies of the bio done for a given raid level, it is
supposed to clear the bio error flag and return success.
We have pointers to the original bio sent down by the higher layers and
pointers to any cloned bios we made for raid purposes. If the original
bio happens to be the one that got an io error, but not the last one to
finish, it might not have the BIO_UPTODATE bit set.
Then, when the last bio does finish, we'll call bio_end_io on the
original bio. It won't have the uptodate bit set and we'll end up
sending EIO to the higher layers.
We already had a check for this, it just was conditional on getting the
IO error on the very last bio. Make the check unconditional so we eat
the EIOs properly.
Liu Bo [Thu, 8 Dec 2011 01:08:40 +0000 (20:08 -0500)]
Btrfs: drop spin lock when memory alloc fails
Drop spin lock in convert_extent_bit() when memory alloc fails,
otherwise, it will be a deadlock.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit 1cf4ffdb3289624a6462c94f2ce05545b32ef736)
Li Zefan [Thu, 8 Dec 2011 01:08:40 +0000 (20:08 -0500)]
Btrfs: check if the to-be-added device is writable
If we call ioctl(BTRFS_IOC_ADD_DEV) directly, we'll succeed in adding
a readonly device to a btrfs filesystem, and btrfs will write to
that device, emitting kernel errors:
[ 3109.833692] lost page write due to I/O error on loop2
[ 3109.833720] lost page write due to I/O error on loop2
...
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit a5d16333612718569ffd26064270e535cb9c3928)
Alexandre Oliva [Thu, 8 Dec 2011 01:08:40 +0000 (20:08 -0500)]
Btrfs: try cluster but don't advance in search list
When we find an existing cluster, we switch to its block group as the
current block group, possibly skipping multiple blocks in the process.
Furthermore, under heavy contention, multiple threads may fail to
allocate from a cluster and then release just-created clusters just to
proceed to create new ones in a different block group.
This patch tries to allocate from an existing cluster regardless of its
block group, and doesn't switch to that group, instead proceeding to
try to allocate a cluster from the group it was iterating before the
attempt.
Signed-off-by: Alexandre Oliva <oliva@lsd.ic.unicamp.br> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit 274bd4fb3ed6b72c1d77ef8850511f09fc6b8e4d)
Alexandre Oliva [Thu, 8 Dec 2011 00:50:42 +0000 (19:50 -0500)]
Btrfs: try to allocate from cluster even at LOOP_NO_EMPTY_SIZE
If we reach LOOP_NO_EMPTY_SIZE, we won't even try to use a cluster that
others might have set up. Odds are that there won't be one, but if
someone else succeeded in setting it up, we might as well use it, even
if we don't try to set up a cluster again.
Signed-off-by: Alexandre Oliva <oliva@lsd.ic.unicamp.br> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit 062c05c46bd4358aad7a0e0cb5ffeb98ab935286)
Jan Schmidt [Thu, 1 Dec 2011 14:30:36 +0000 (09:30 -0500)]
Btrfs: fix meta data raid-repair merge problem
Commit 4a54c8c16 introduced raid-repair, killing the individual
readpage_io_failed_hook entries from inode.c and disk-io.c. Commit 4bb31e92 introduced new readahead code, adding a readpage_io_failed_hook to
disk-io.c.
The raid-repair commit had logic to disable raid-repair, if
readpage_io_failed_hook is set. Thus, the readahead commit effectively
disabled raid-repair for meta data.
This commit changes the logic to always attempt raid-repair when needed and
call the readpage_io_failed_hook in case raid-repair fails. This is much
more straight forward and should have been like that from the beginning.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net> Reported-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit f4a8e6563ea5366f563cb741a27fe90c5fa7f0fc)
Alexandre Oliva [Wed, 30 Nov 2011 18:43:00 +0000 (13:43 -0500)]
Btrfs: skip block groups without enough space for a cluster
We test whether a block group has enough free space to hold the
requested block, but when we're doing clustered allocation, we can
save some cycles by testing whether it has enough room for the cluster
upfront, otherwise we end up attempting to set up a cluster and
failing. Only in the NO_EMPTY_SIZE loop do we attempt an unclustered
allocation, and by then we'll have zeroed the cluster size, so this
patch won't stop us from using the block group as a last resort.
Signed-off-by: Alexandre Oliva <oliva@lsd.ic.unicamp.br> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit 425d83156ca27f74e2cc3f370138038c3c8947f8)
Alexandre Oliva [Wed, 30 Nov 2011 18:43:00 +0000 (13:43 -0500)]
Btrfs: start search for new cluster at the beginning
Instead of starting at zero (offset is always zero), request a cluster
starting at search_start, that denotes the beginning of the current
block group.
Signed-off-by: Alexandre Oliva <oliva@lsd.ic.unicamp.br> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit 1b22bad779be7fe07242be04749ec969164528b8)
Alexandre Oliva [Wed, 30 Nov 2011 18:43:00 +0000 (13:43 -0500)]
Btrfs: reset cluster's max_size when creating bitmap
The field that indicates the size of the largest contiguous chunk of
free space in the cluster is not initialized when setting up bitmaps,
it's only increased when we find a larger contiguous chunk. We end up
retaining a larger value than appropriate for highly-fragmented
clusters, which may cause pointless searches for large contiguous
groups, and even cause clusters that do not meet the density
requirements to be set up.
Signed-off-by: Alexandre Oliva <oliva@lsd.ic.unicamp.br> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit b78d09bceb524ee6481c21b77bda22d766b10e6a)
Alexandre Oliva [Mon, 28 Nov 2011 14:04:43 +0000 (12:04 -0200)]
Btrfs: initialize new bitmaps' list
We're failing to create clusters with bitmaps because
setup_cluster_no_bitmap checks that the list is empty before inserting
the bitmap entry in the list for setup_cluster_bitmap, but the list
field is only initialized when it is restored from the on-disk free
space cache, or when it is written out to disk.
Besides a potential race condition due to the multiple use of the list
field, filesystem performance severely degrades over time: as we use
up all non-bitmap free extents, the try-to-set-up-cluster dance is
done at every metadata block allocation. For every block group, we
fail to set up a cluster, and after failing on them all up to twice,
we fall back to the much slower unclustered allocation.
To make matters worse, before the unclustered allocation, we try to
create new block groups until we reach the 1% threshold, which
introduces additional bitmaps and thus block groups that we'll iterate
over at each metadata block request.
(cherry picked from commit f2d0f6765d6332f9be732965a0c6f3b8a55082b4)
Mike Fleetwood [Fri, 18 Nov 2011 18:55:01 +0000 (18:55 +0000)]
Btrfs: Don't error on resizing FS to same size
It seems overly harsh to fail a resize of a btrfs file system to the
same size when a shrink or grow would succeed. User app GParted trips
over this error. Allow it by bypassing the shrink or grow operation.
Miao Xie [Fri, 18 Nov 2011 09:43:00 +0000 (17:43 +0800)]
Btrfs: fix deadlock on metadata reservation when evicting a inode
When I ran the xfstests, I found the test tasks was blocked on meta-data
reservation.
By debugging, I found the reason of this bug:
start transaction
|
v
reserve meta-data space
|
v
flush delay allocation -> iput inode -> evict inode
^ |
| v
wait for delay allocation flush <- reserve meta-data space
And besides that, the flush on evicting inode will block the thread, which
is reclaiming the memory, and make oom happen easily.
Fix this bug by skipping the flush step when evicting inode.
Chris Mason [Mon, 21 Nov 2011 14:39:11 +0000 (09:39 -0500)]
Btrfs: remove free-space-cache.c WARN during log replay
The log replay code only partially loads block groups, since
the block group caching code is able to detect and deal with
extents the logging code has pinned down.
While the logging code is pinning down block groups, there is
a bogus WARN_ON we're hitting if the code wasn't able to find
an extent in the cache. This commit removes the warning because
it can happen any time there isn't a valid free space cache
for that block group.
Josef Bacik [Thu, 17 Nov 2011 16:34:31 +0000 (11:34 -0500)]
Btrfs: sectorsize align offsets in fiemap
We've been hitting BUG()'s in btrfs_cont_expand and btrfs_fallocate and anywhere
else that calls btrfs_get_extent while running xfstests 13 in a loop. This is
because fiemap is calling btrfs_get_extent with non-sectorsize aligned offsets,
which will end up adding mappings that are not sectorsize aligned, which will
cause problems in some cases for subsequent calls to btrfs_get_extent for
similar areas that are sectorsize aligned. With this patch I ran xfstests 13 in
a loop for a couple of hours and didn't hit the problem that I could previously
hit in at most 20 minutes. Thanks,
Josef Bacik [Tue, 15 Nov 2011 14:31:24 +0000 (09:31 -0500)]
Btrfs: clear pages dirty for io and set them extent mapped
When doing the io_ctl helpers to clean up the free space cache stuff I stopped
using our normal prepare_pages stuff, which means I of course forgot to do
things like set the pages extent mapped, which will cause us all sorts of
wonderful propblems. Thanks,
Josef Bacik [Mon, 14 Nov 2011 18:52:14 +0000 (13:52 -0500)]
Btrfs: wait on caching if we're loading the free space cache
We've been hitting panics when running xfstest 13 in a loop for long periods of
time. And actually this problem has always existed so we've been hitting these
things randomly for a while. Basically what happens is we get a thread coming
into the allocator and reading the space cache off of disk and adding the
entries to the free space cache as we go. Then we get another thread that comes
in and tries to allocate from that block group. Since block_group->cached !=
BTRFS_CACHE_NO it goes ahead and tries to do the allocation. We do this because
if we're doing the old slow way of caching we don't want to hold people up and
wait for everything to finish. The problem with this is we could end up
discarding the space cache at some arbitrary point in the future, which means we
could very well end up allocating space that is either bad, or when the real
caching happens it could end up thinking the space isn't in use when it really
is and cause all sorts of other problems.
The solution is to add a new flag to indicate we are loading the free space
cache from disk, and always try to cache the block group if cache->cached !=
BTRFS_CACHE_FINISHED. That way if we are loading the space cache anybody else
who tries to allocate from the block group will have to wait until it's finished
to make sure it completes successfully. Thanks,
Arnd Hannemann [Sun, 20 Nov 2011 12:33:38 +0000 (07:33 -0500)]
Btrfs: prefix resize related printks with btrfs:
For the user it is confusing to find something like:
[10197.627710] new size for /dev/mapper/vg0-usr_share is 3221225472
in kernel log, because it doesn't point directly to btrfs.
This patch prefixes those messages with "btrfs:" like other btrfs
related printks.
Signed-off-by: Arnd Hannemann <arnd@arndnet.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit 5bb1468238e20b15921909e9f9601e945f03bac7)
David Sterba [Sun, 20 Nov 2011 12:33:38 +0000 (07:33 -0500)]
btrfs: fix stat blocks accounting
Round inode bytes and delalloc bytes up to real blocksize before
converting to sector size. Otherwise eg. files smaller than 512
are reported with zero blocks due to incorrect rounding.
Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit fadc0d8be4dfca80f6c568bc5874931893c6709b)
Li Zefan [Sun, 20 Nov 2011 12:33:38 +0000 (07:33 -0500)]
Btrfs: avoid unnecessary bitmap search for cluster setup
setup_cluster_no_bitmap() searches all the extents and bitmaps starting
from offset. Therefore if it returns -ENOSPC, all the bitmaps starting
from offset are in the bitmaps list, so it's sufficient to search from
this list in setup_cluser_bitmap().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit 52621cb6ed0e0e14358bb317bda7cd5fbd5c2a27)
Li Zefan [Sun, 20 Nov 2011 12:33:38 +0000 (07:33 -0500)]
Btrfs: fix to search one more bitmap for cluster setup
Suppose there are two bitmaps [0, 256], [256, 512] and one extent
[100, 120] in the free space cache, and we want to setup a cluster
with offset=100, bytes=50.
In this case, there will be only one bitmap [256, 512] in the temporary
bitmaps list, and then setup_cluster_bitmap() won't search bitmap [0, 256].
The cause is, the list is constructed in setup_cluster_no_bitmap(),
and only bitmaps with bitmap_entry->offset >= offset will be added
into the list, and the very bitmap that convers offset has
bitmap_entry->offset <= offset.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit 0f0fbf1d0e188d129756e9508090af4bdbfde00b)
Jan Schmidt [Sun, 20 Nov 2011 12:33:38 +0000 (07:33 -0500)]
btrfs: mirror_num should be int, not u64
My previous patch introduced some u64 for failed_mirror variables, this one
makes it consistent again.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit 32240a913d9f3a5aad42175d7696590ea1bfdb08)
Jeff Mahoney [Sun, 20 Nov 2011 12:31:57 +0000 (07:31 -0500)]
btrfs: Fix up 32/64-bit compatibility for new ioctls
This patch casts to unsigned long before casting to a pointer and fixes
the following warnings:
fs/btrfs/extent_io.c:2289:20: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
fs/btrfs/ioctl.c:2933:37: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
fs/btrfs/ioctl.c:2937:21: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
fs/btrfs/ioctl.c:3020:21: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
fs/btrfs/scrub.c:275:4: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
fs/btrfs/backref.c:686:27: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
(cherry picked from commit 745c4d8e160afaf6c75e887c27ea4b75c8142b26)
Chris Mason [Fri, 18 Nov 2011 20:07:51 +0000 (15:07 -0500)]
Btrfs: fix barrier flushes
When btrfs is writing the super blocks, it send barrier flushes to make
sure writeback caching drives get all the metadata on disk in the
right order.
But, we have two bugs in the way these are sent down. When doing
full commits (not via the tree log), we are sending the barrier down
before the last super when it should be going down before the first.
In multi-device setups, we should be waiting for the barriers to
complete on all devices before writing any of the supers.
Both of these bugs can cause corruptions on power failures. We fix it
with some new code to send down empty barriers to all devices before
writing the first super.
Alexandre Oliva found the multi-device bug. Arne Jansen did the async
barrier loop.
Signed-off-by: Chris Mason <chris.mason@oracle.com> Reported-by: Alexandre Oliva <oliva@lsd.ic.unicamp.br>
(cherry picked from commit 387125fc722a8ed432066b85a552917343bdafca)
nagalakshmi.nandigama@lsi.com [Tue, 13 Dec 2011 03:59:15 +0000 (09:29 +0530)]
[SCSI] mpt2sas: Removed redundant calling of _scsih_probe_devices() from _scsih_probe
Removed redundant calling of _scsih_probe_devices() from _scsih_probe as
it is getting called from _scsih_scan_finished.
Also moved the function scsi_scan_host(shost) to get called after the
volumes on warp drive are reported to the OS. Otherwise by the time
the (ioc->hide_drives) flags is set, the volumes on warp drive
are reported to the OS already.
Also modified the initialization of reply queues only in case of driver load
time in the function _base_make_ioc_operational().
Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Commit 921cd8024b90 ("[SCSI] mpt2sas: New feature - Fast Load
Support") moved handling of the diag_buffer_enable module parameter
from mpt2sas_base.c to mpt2sas_scsih.c, but it left an old copy of the
parameter in mpt2sas_base.c. Remove the unused stub.
Signed-off-by: Roland Dreier <roland@purestorage.com> Acked-by: "Nandigama, Nagalakshmi" <Nagalakshmi.Nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
However, on a big machine, ioc->cpu_count could be outside the range
that fits in a u8; eg a system with 256 CPUs will end up
reply_queue_count set to 0.
Fix this by calculating the minimum as ints and then letting the
assignment to reply_queue_count handle integer demotion.
Signed-off-by: Roland Dreier <roland@purestorage.com> Acked-by: "Nandigama, Nagalakshmi" <Nagalakshmi.Nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Roland Dreier [Thu, 1 Dec 2011 01:14:22 +0000 (17:14 -0800)]
[SCSI] mpt2sas: Fix leak on mpt2sas_base_attach() error path
Commit 911ae9434f83 ("[SCSI] mpt2sas: Added NUNA IO support in driver
which uses multi-reply queue support of the HBA") added new
allocations to the beginning of mpt2sas_base_attach(), which means
directly returning an error on failure of mpt2sas_base_map_resources()
will leak those allocations.
Fix this by doing "goto out_free_resources" in this place too, as the
rest of the function does.
Signed-off-by: Roland Dreier <roland@purestorage.com> Acked-by: "Nandigama, Nagalakshmi" <Nagalakshmi.Nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
nagalakshmi.nandigama@lsi.com [Thu, 1 Dec 2011 02:23:08 +0000 (07:53 +0530)]
[SCSI] mpt2sas : Fix for memory allocation error for large host credits
The amount of memory required for tracking chain buffers is rather
large, and when the host credit count is big, memory allocation
failure occurs inside __get_free_pages.
The fix is to limit the number of chains to 100,000. In addition,
the number of host credits is limited to 30,000 IOs. However this
limitation can be overridden this using the command line option
max_queue_depth. The algorithm for calculating the
reply_post_queue_depth is changed so that it is equal to
(reply_free_queue_depth + 16), previously it was (reply_free_queue_depth * 2).
Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
nagalakshmi.nandigama@lsi.com [Thu, 1 Dec 2011 02:23:02 +0000 (07:53 +0530)]
[SCSI] mpt2sas: Do not retry a timed out direct IO for warpdrive
When an I/O request to a WarpDrive is timed out by SML and if the
I/O request to the WarpDrive is sent as direct I/O then the aborted
direct I/O will be retried as normal Volume I/O and which results
in failure of Target Reset and results in host reset.
The fix is to not retry a failed IO to volume when the original
IO was sent as direct IO with an ioc status
MPI2_IOCSTATUS_SCSI_TASK_TERMINATED.
Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
nagalakshmi.nandigama@lsi.com [Thu, 1 Dec 2011 02:22:56 +0000 (07:52 +0530)]
[SCSI] mpt2sas: Release spinlock for the raid device list before blocking it
Added code to release the spinlock that is used to protect the
raid device list before calling a function that can block. The
blocking was causing a reschedule, and subsequently it is tried
to acquire the same lock, resulting in a panic (NMI Watchdog
detecting a CPU lockup).
Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
nagalakshmi.nandigama@lsi.com [Thu, 1 Dec 2011 02:22:49 +0000 (07:52 +0530)]
[SCSI] mpt2sas: MPI next revision header update
1)Removed Power Management Control option for PCIe link.
2)Added RAID Action for performing a compatibility check. Added
product-specific range to RAID Action values.
3)Added PhysicalPort field to SAS Device Status Change Event data.
4)Added SpinupFlags field containing a Disable Spin-up bit to the
SpinupGroupParameters fields of SAS IO Unit Page 4.
Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
nagalakshmi.nandigama@lsi.com [Thu, 1 Dec 2011 02:13:50 +0000 (07:43 +0530)]
[SCSI] mpt2sas: Do not set sas_device->starget to NULL from the slave_destroy callback when all the LUNS have been deleted
If the sas_device->starget to NULL from slave_destroy callback for LUN=1
even though LUN=0 exist, results in entire target getting deleted.
To resolve the issue, the driver should only set sas_device->starget to
NULL when all the LUNS have been deleted from the slave_destroy.
Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
nagalakshmi.nandigama@lsi.com [Thu, 1 Dec 2011 02:12:04 +0000 (07:42 +0530)]
[SCSI] mpt2sas: Better handling DEAD IOC (PCI-E LInk down) error condition
Detection of Dead IOC has been done in fault_reset_work thread.
If IOC Doorbell is 0xFFFFFFFF, it will be detected as non-operation/DEAD IOC.
When a DEAD IOC is detected, the code is modified to remove that IOC and
all its attached devices from OS.
The PCI layer API pci_remove_bus_device() is called to remove the dead IOC.
Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Dan Carpenter [Fri, 4 Nov 2011 18:25:01 +0000 (21:25 +0300)]
[SCSI] mpt2sas: add missing allocation.
There was supposed to be a kzalloc() here and the compiler complained
about it.
mpt2sas_scsih.c: In function ‘mpt2sas_scsih_reset_handler’:
mpt2sas_scsih.c:2807:21: warning: ‘fw_event’ may be used uninitialized in this function [-Wuninitialized]
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: "Nandigama, Nagalakshmi" <Nagalakshmi.Nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
nagalakshmi.nandigama@lsi.com [Fri, 21 Oct 2011 04:38:07 +0000 (10:08 +0530)]
[SCSI] mpt2sas: Fix for Panic when inactive volume is tried deleting
The driver was setting the action to MPI2_CONFIG_ACTION_PAGE_READ_CURRENT,
which only returns active volumes. In order to get info on inactive volumes,
the driver needs to change the action to
MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM, and traverse each config till the
iocstatus is MPI2_IOCSTATUS_CONFIG_INVALID_PAGE returned.
Added a change in the driver to remove the instance of
sas_device object when the driver returns "1" from the slave_configure callback.
Also fixed code to report the hot spares to the operating system with a /dev/sg
assigned.
Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
nagalakshmi.nandigama@lsi.com [Wed, 19 Oct 2011 10:07:37 +0000 (15:37 +0530)]
[SCSI] mpt2sas: Fix for issue Port Reset taking long time(around 5 mins) to complete while issued during creating a volume
This is due to the slave_configuration routine is getting called when
host reset is active, and config page reads are failing, and driver
attempts to added device with stale config data.
To fix the issue, added error checking in slave_configure to check
for configuration pages failing, and return "1" so the device is
not configured. The config pages are failing if raid volume is
configured while issuing a host reset, thus driver is reading stale
data and proceeding to attempt to add. The fix is to return error
so the volume is not configured.
Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
nagalakshmi.nandigama@lsi.com [Wed, 19 Oct 2011 10:07:24 +0000 (15:37 +0530)]
[SCSI] mpt2sas: Fix for deadlock between hot plug worker threads and host reset context
This is due to driver reporting a device missing to the OS then the OS sending
a SYNC_CACHE request to driver while the IO queues are locked due to host reset.
To fix the issue, the driver will be waking up the port enable context
immediately when the driver receives the reply message, instead of waiting
on the hot plug worker threads.
Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
nagalakshmi.nandigama@lsi.com [Wed, 19 Oct 2011 10:07:14 +0000 (15:37 +0530)]
[SCSI] mpt2sas: Fix for dead lock occurring between host_lock and sas_device_lock
Fix for dead lock occurring between host_lock and sas_device_lock.
The deadlock is between two spin locks, between the shost->host_lock
and driver ioc->sas_device_lock.
The fix is to rearrange the code in the FW/Driver device removal
handshake so the ioc->sas_device_lock is not occurring when the
shost->host_lock is taken.
[jejb: zero initialise sas_address to fix spurious compiler warning] Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
nagalakshmi.nandigama@lsi.com [Wed, 19 Oct 2011 10:07:00 +0000 (15:37 +0530)]
[SCSI] mpt2sas: Fix drives not getting properly deleted if sas cable is removed while host reset is active
The fix is in the driver-firmware handshake device removal code. We
need to read the controller ioc_state to see if controller is OPERATIONAL
prior to sending target reset and OP_REMOVE. Previously it was checking
the flag ioc->shost_recovery flag, which is always set when host reset is
active, thus preventing drives from getting properly deleted.
Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
nagalakshmi.nandigama@lsi.com [Fri, 21 Oct 2011 04:36:33 +0000 (10:06 +0530)]
[SCSI] mpt2sas: Fix for system hang when discovery in progress
Fix for issue : While discovery is in progress, hot unplug and hot plug of
enclosure connected to the controller card is causing system to hang.
When a device is in the process of being detected at driver load time then
if it is removed, the device that is no longer present will not be added
to the list. So the code in _scsih_probe_sas() is rearranged as such so
the devices that failed to be detected are not added to the list.
Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
nagalakshmi.nandigama@lsi.com [Wed, 19 Oct 2011 10:06:26 +0000 (15:36 +0530)]
[SCSI] mpt2sas: New feature - Fast Load Support
New feature Fast Load Support.
(1)Asynchronous SCSI scanning: This will allow the drivers to scan
for devices in parallel while other device drivers are loading at
the same time. This will improve the amount of time it takes for the
OS to load.
(2) Reporting Devices while port enable is active: This feature will
allow devices to be reported to OS immediately while port enable is
active. The previous implementation waits for port enable to complete,
and then report devices. This feature is only enabled on IT firmware
configurations when there are no boot device configured in BIOS Configuration
Utility, else the driver will wait till port enable completes reporting
devices. For IR firmware, this feature is turned off. This feature is to
address large SAS topologies (>100 drives) when the boot OS is using onboard
SATA device, in other words, the boot devices is not
connected to our controller.
(3) Scanning for devices after diagnostic reset completes: A new routine
_scsih_scan_start is added. This will scan the expander pages, IR pages,
and sas device pages, then reporting new devices to SCSI Mid layer. It
seems the driver is not supporting adding devices while diagnostic reset
is active. Apparently this is due to the sanity checks on
ioc->shost_recovery flag throughout the context of kernel work thread FIFO,
and the mpt2sas_fw_work.
Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Manual merge of upstream commit #921cd802.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
nagalakshmi.nandigama@lsi.com [Wed, 19 Oct 2011 10:06:05 +0000 (15:36 +0530)]
[SCSI] mpt2sas: MPI next revision header update
1)Added ProxyVF_ID field to Configuration Request message.
2)Added IO Unit Page 8, IO Unit Page 9,and IO Unit Page 10.
3)Added SASNotifyPrimitiveMasks field to IOC Page 7.
4)Added SAS NOTIFY Primitive event.
5)Added Temperature Threshold Event.
6)Added Host Message Event.
7)Added Send Host Message request and reply.
Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[SCSI] mpt2sas: Added NUNA IO support in driver which uses multi-reply queue support of the HBA
Support added for controllers capable of multi reply queues.
The following are the modifications to the driver to support NUMA.
1) Create the new structure adapter_reply_queue to contain the reply queue
info for every msix vector. This object will contain a
reply_post_host_index, reply_post_free for each instance, msix_index, among
other parameters. We will track all the reply queues on a link list called
ioc->reply_queue_list. Each reply queue is aligned with each IRQ, and is
passed to the interrupt via the bus_id parameter.
(2) The driver will figure out the msix_vector_count from the PCIe MSIX
capabilities register instead of the IOC Facts->MaxMSIxVectors. This is
because the firmware is not filling in this field until the driver has
already registered MSIX support.
(3) If the ioc_facts reports that the controller is MSIX compatible in the
capabilities, then the driver will request for multiple irqs. This count
is calculated based on the minimum between the online cpus available and
the ioc->msix_vector_count. This count is reported to firmware in the
ioc_init request.
(4) New routines were added _base_free_irq and _base_request_irq, so
registering and freeing msix vectors were done thru simple function API.
(5) The new routine _base_assign_reply_queues was added to align the msix
indexes across cpus. This will initialize the array called
ioc->cpu_msix_table. This array is looked up on every MPI request so the
MSIxIndex is set appropriately.
(6) A new shost sysfs attribute was added to report the reply_queue_count.
(7) User needs to set the affinity cpu mask, so the interrupts occur on the
same cpu that sent the original request.
Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
kashyap.desai@lsi.com [Thu, 4 Aug 2011 11:17:50 +0000 (16:47 +0530)]
[SCSI] mpt2sas: Added missing mpt2sas_base_detach call from scsih_remove context
mpt2sas_base_detach() call was removed from _scsih_remove() while
doing some code shuffling. Mainly when we work on adding code for
scsih_shutdown(). I have added back mpt2sas_base_detach() which will
get callled from _scsih_remove().
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[SCSI] mpt2sas: WarpDrive Infinite command retries due to wrong scsi command entry in MPI message
Issue:
This issue is seen on LSI H/W WarpDrive SSS6200 When filed direct I/O
is tried as volume I/O the scmd field in internal lookup table get
cleared and because of that the retried volume I/O never gets reported
as completed to SML.
Result:
I/O timeout and Error handling thread will kicking off
Fix:
Setting back the scmd in the lookup table before retrying the failed
direct i/o
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Kashyap, Desai [Tue, 14 Jun 2011 05:26:43 +0000 (10:56 +0530)]
[SCSI] mpt2sas: fix broadcast AEN and task management issue
Properly handling of target reset in multi-initiator environment
Clean up in broadcast change handling:
(1) Need to look at the status of each task management request, and retry
the TM when there are failures.
(2) Need quiescence IO so the driver doesn't take on more IO request while
it's in the middle of sending TM request to firmware
(3) Add support to keep track of how many pending broadcast AEN events
are received while the broadcast handling is active, then loop back at
the end of this routine if there were any events received.
Clean up in mpt2sas_scsih_issue_tm routine:
(1) Make sure proper status is returned when host reset fails
(2) Clean up sanity checks near end of routine, insuring all outstanding
IOs were completed.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Kashyap, Desai [Tue, 14 Jun 2011 05:26:12 +0000 (10:56 +0530)]
[SCSI] mpt2sas: Set max_sector count from module parameter
This feature is to override the default
max_sectors setting at load time, taking max_sectors as an
command line option when loading the driver. The setting is
currently hard-coded in the driver to 8192 sectors (4MB transfers).
If max_sectors is specified at load time, minimum specified
setting will be 64, and the maximum is 8192. The driver will
modify the setting to be on even boundary. If max_sectors is not
specified, the driver will default to 8192.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Kashyap, Desai [Tue, 14 Jun 2011 05:25:45 +0000 (10:55 +0530)]
[SCSI] mpt2sas MPI next revision header update
mpt2sas driver revision q header update:
(1) Modified the descriptions of the LocalAddress bit in the
Flags field of the MPI SGE Format description and the MPI
Simple Element.
(2) Modified Data Location Address Space bits in the Flags field
of the IEEE Chain Element.
(3) Added more detail to the description of the DataLength field
for the SCSI IO Request and Target Assist Request. Removed
restriction on using chained SGLs when using multicast or
bidirectional support.
(4) In Manufacturing Page 7, added ReceptacleID field to
ConnectorInfo, and reworked how the Pinout field is used.
(5) In IO Unit Page 7, added BoardTemperature and
BoardTemperatureUnits fields.
(6) In IOC Page 1, changed CoalescingTimeout to units of
half-microsecond and updated descriptions.
(7) Modified descriptions of SATASlumberTimeout and
SASSlumberTimeout fields in SAS IO Unit Page 5 to indicate
the timers start after partial mode is entered.
(8) Added Extended Manufacturing configuration pages.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
If a device is shutdown, then there might be a pending interrupt,
which will be processed after we reenable interrupts, which causes the
original handler to be run. If the old handler is the (broadcast)
periodic handler the shutdown state might hang the kernel completely.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Oprofile may crash in a KVM guest while unlaoding modules. This
happens if oprofile_arch_init() fails and oprofile switches to the hr
timer mode as a fallback. In this case oprofile_arch_exit() is called,
but it never was initialized properly which causes the crash. This
patch fixes this.
oprofile: using timer interrupt.
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58
PGD 41da3f067 PUD 41d80e067 PMD 0
Oops: 0002 [#1] PREEMPT SMP
CPU 5
Modules linked in: oprofile(-)
If cpu A calls jump_label_inc() just after atomic_add_return() is
called by cpu B, atomic_inc_not_zero() will return value greater then
zero and jump_label_inc() will return to a caller before jump_label_update()
finishes its job on cpu B.
Link: http://lkml.kernel.org/r/20111018175551.GH17571@redhat.com Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A update is made to the sched:sched_switch event that adds some
logic to the first parameter of the __print_flags() that shows the
state of tasks. This change cause perf to fail parsing the flags.
A simple fix is needed to have the parser be able to process ops
within the argument.
Reported-by: Andrew Vagin <avagin@openvz.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix a bug introduced by e9dbfae5, which prevents event_subsystem from
ever being released.
Ref_count was added to keep track of subsystem users, not for counting
events. Subsystem is created with ref_count = 1, so there is no need to
increment it for every event, we have nr_events for that. Fix this by
touching ref_count only when we actually have a new user -
subsystem_open().
Currently, the RTC code does not disable the alarm in the hardware.
This means that after a sequence such as the one below (the files are in the
RTC sysfs), the box will boot up after 2 minutes even though we've
asked for the alarm to be turned off.
With Dmitry fsstress updates I've seen very reproducible crashes in
xfs_attr_shortform_remove because xfs_attr_shortform_bytesfit claims that
the attributes would not fit inline into the inode after removing an
attribute. It turns out that we were operating on an inode with lots
of delalloc extents, and thus an if_bytes values for the data fork that
is larger than biggest possible on-disk storage for it which utterly
confuses the code near the end of xfs_attr_shortform_bytesfit.
Fix this by always allowing the current attribute fork, like we already
do for the attr1 format, given that delalloc conversion will take care
for moving either the data or attribute area out of line if it doesn't
fit at that point - or making the point moot by merging extents at this
point.
Also document the function better, and clean up some loose bits.
Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com> Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If we are doing synchronous inode reclaim we block the VM from making
progress in memory reclaim. So if we encouter a flush locked inode
promote it in the delwri list and wake up xfsbufd to write it out now.
Without this we can get hangs of up to 30 seconds during workloads hitting
synchronous inode reclaim.
The scheme is copied from what we do for dquot reclaims.
Reported-by: Simon Kirby <sim@hostway.ca> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Simon Kirby <sim@hostway.ca> Signed-off-by: Ben Myers <bpm@sgi.com> Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Trond Myklebust [Tue, 18 Oct 2011 17:11:07 +0000 (10:11 -0700)]
NFS: Prevent 3.0 from crashing if it receives a partial layout
This is a backport of critical parts of
commit 7c24d9489f "NFSv4.1: File layout only supports whole file layouts"
It prevents the file layout driver from (incorrectly) using
partial layouts, but ignores the part of the referenced commmit that
relies on additional machinery to change the LAYOUTGET request
based on layout driver.
In irq_wait_for_interrupt(), the should_stop member is verified before
setting the task's state to TASK_INTERRUPTIBLE and calling schedule().
In case kthread_stop sets should_stop and wakes up the process after
should_stop is checked by the irq thread but before the task's state
is changed, the irq thread might never exit:
projects / users / jedix / linux-maple.git / log