usb: gadget: lpc32xx_udc: don't dereference ep pointer before null check

[ Upstream commit eafa80041645cd7604c4357b1a0cd4a3c81f2227 ]

Currently pointer ep is being dereferenced before it is null checked
leading to a null pointer dereference issue.  Fix this by only assigning
pointer udc once ep is known to be not null.  Also remove a debug
message that requires a valid udc which may not be possible at that
point.

Addresses-Coverity: ("Dereference before null check")
Fixes: 24a28e428351 ("USB: gadget driver for LPC32xx")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: gadget: udc: s3c2410_udc: Remove pointless NULL check in s3c2410_udc_nuke

[ Upstream commit 7a0fbcf7c308920bc6116b3a5fb21c8cc5fec128 ]

Clang warns:

drivers/usb/gadget/udc/s3c2410_udc.c:255:11: warning: comparison of
address of 'ep->queue' equal to a null pointer is always false
[-Wtautological-pointer-compare]
        if (&ep->queue == NULL)
             ~~~~^~~~~    ~~~~
1 warning generated.

It is not wrong, queue is not a pointer so if ep is not NULL, the
address of queue cannot be NULL. No other driver does a check like this
and this check has been around since the driver was first introduced,
presumably with no issues so it does not seem like this check should be
something else. Just remove it.

Commit afe956c577b2d ("kbuild: Enable -Wtautological-compare") exposed
this but it is not the root cause of the warning.

Fixes: 3fc154b6b8134 ("USB Gadget driver for Samsung s3c2410 ARM SoC")
Link: https://github.com/ClangBuiltLinux/linux/issues/1004
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc2: gadget: move gadget resume after the core is in L0 state

[ Upstream commit 8c935deacebb8fac8f41378701eb79d12f3c2e2d ]

When the remote wakeup interrupt is triggered, lx_state is resumed from L2
to L0 state. But when the gadget resume is called, lx_state is still L2.
This prevents the resume callback to queue any request. Any attempt
to queue a request from resume callback will result in:
- "submit request only in active state" debug message to be issued
- dwc2_hsotg_ep_queue() returns -EAGAIN

Call the gadget resume routine after the core is in L0 state.

Fixes: f81f46e1f530 ("usb: dwc2: implement hibernation during bus suspend/resume")
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: da9062: No need to ping manually before setting timeout

[ Upstream commit a0948ddba65f4f6d3cfb5e2b84685485d0452966 ]

There is actually no need to ping the watchdog before disabling it
during timeout change. Disabling the watchdog already takes care of
resetting the counter.

This fixes an issue during boot when the userspace watchdog handler takes
over and the watchdog is already running. Opening the watchdog in this case
leads to the first ping and directly after that without the required
heartbeat delay a second ping issued by the set_timeout call. Due to the
missing delay this resulted in a reset.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20200403130728.39260-3-s.riedmueller@phytec.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/timens: handle a case when alarm clocks are not supported

[ Upstream commit 558ae0355a91c7d28fdf4c0011bee6ebb5118632 ]

This can happen if a testing node doesn't have RTC (real time clock)
hardware or it doesn't support alarms.

Fixes: 61c57676035d ("selftests/timens: Add Time Namespace test for supported clocks")
Acked-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reported-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/cma: Fix ports memory leak in cma_configfs

[ Upstream commit 63a3345c2d42a9b29e1ce2d3a4043689b3995cea ]

The allocated ports structure in never freed. The free function should be
called by release_cma_ports_group, but the group is never released since
we don't remove its default group.

Remove default groups when device group is deleted.

Fixes: 045959db65c6 ("IB/cma: Add configfs for rdma_cm")
Link: https://lore.kernel.org/r/20200521072650.567908-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: light: gp2ap002: Take runtime PM reference on light read

[ Upstream commit f6dbf83c17cb223ceabd7c42d441414f3e0e8a86 ]

The light sensor needs the regulators to be enabled which means
the runtime PM needs to be on.  This only happened when the
proximity part of the chip was enabled.

As fallout from this change, only report changes to the prox
state in the interrupt handler when it is explicitly enabled.

Fixes: 97d642e23037 ("iio: light: Add a driver for Sharp GP2AP002x00F")
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link

[ Upstream commit 87dccf09323fc363bd0d072fcc12b96622ab8c69 ]

The vim3l board does not work with a standard PCIe switch (ASM1184e),
spitting all kind of errors - hinting at HW misconfiguration (no link,
port enumeration issues, etc).

According to the the Synopsys DWC PCIe Reference Manual, in the section
dedicated to the PLCR register, bit 7 is described (FAST_LINK_MODE) as:

"Sets all internal timers to fast mode for simulation purposes."

it is sound to set this bit from a simulation perspective, but on actual
silicon, which expects timers to have a nominal value, it is not.

Make sure the FAST_LINK_MODE bit is cleared when configuring the RC
to solve this problem.

Link: https://lore.kernel.org/r/20200429164230.309922-1-maz@kernel.org
Fixes: 9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver")
Signed-off-by: Marc Zyngier <maz@kernel.org>
[lorenzo.pieralisi@arm.com: commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: dwc: Fix inner MSI IRQ domain registration

[ Upstream commit 0414b93e78d87ecc24ae1a7e61fe97deb29fa2f4 ]

On a system that uses the internal DWC MSI widget, I get this
warning from debugfs when CONFIG_GENERIC_IRQ_DEBUGFS is selected:

  debugfs: File ':soc:pcie@fc000000' in directory 'domains' already present!

This is due to the fact that the DWC MSI code tries to register two
IRQ domains for the same firmware node, without telling the low
level code how to distinguish them (by setting a bus token). This
further confuses debugfs which tries to create corresponding
files for each domain.

Fix it by tagging the inner domain as DOMAIN_BUS_NEXUS, which is
the closest thing we have as to "generic MSI".

Link: https://lore.kernel.org/r/20200501113921.366597-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname()

[ Upstream commit c8a119779f5609de8dcd98630f71cc7f1b2e4e8c ]

platform_get_resource() may fail and return NULL, so we had better
check its return value to avoid a NULL pointer dereference a bit later
in the code. Fix it to use devm_platform_ioremap_resource_byname()
instead of calling platform_get_resource_byname() and devm_ioremap().

Link: https://lore.kernel.org/r/20200429015027.134485-1-weiyongjun1@huawei.com
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
[lorenzo.pieralisi@arm.com: commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: mhi: core: Read transfer length from an event properly

[ Upstream commit ee75cedf82d832561af8ba8380aeffd00a9eea77 ]

When MHI Driver receives an EOT event, it reads xfer_len from the
event in the last TRE. The value is under control of the MHI device
and never validated by Host MHI driver. The value should never be
larger than the real size of the buffer but a malicious device can
set the value 0xFFFF as maximum. This causes driver to memory
overflow (both read or write). Fix this issue by reading minimum of
transfer length from event and the buffer length provided.

Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200521170249.21795-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI/PTM: Inherit Switch Downstream Port PTM settings from Upstream Port

[ Upstream commit 7b38fd9760f51cc83d80eed2cfbde8b5ead9e93a ]

Except for Endpoints, we enable PTM at enumeration-time.  Previously we did
not account for the fact that Switch Downstream Ports are not permitted to
have a PTM capability; their PTM behavior is controlled by the Upstream
Port (PCIe r5.0, sec 7.9.16).  Since Downstream Ports don't have a PTM
capability, we did not mark them as "ptm_enabled", which meant that
pci_enable_ptm() on an Endpoint failed because there was no PTM path to it.

Mark Downstream Ports as "ptm_enabled" if their Upstream Port has PTM
enabled.

Fixes: eec097d43100 ("PCI: Add pci_enable_ptm() for drivers to enable PTM on endpoints")
Reported-by: Aditya Paluri <Venkata.AdityaPaluri@synopsys.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/cpuhotplug: Fix initial CPU offlining for PV(H) guests

[ Upstream commit c54b071c192dfe8061336f650ceaf358e6386e0b ]

Commit a926f81d2f6c ("xen/cpuhotplug: Replace cpu_up/down() with
device_online/offline()") replaced cpu_down() with device_offline()
call which requires that the CPU has been registered before. This
registration, however, happens later from topology_init() which
is called as subsys_initcall(). setup_vcpu_hotplug_event(), on the
other hand, is invoked earlier, during arch_initcall().

As result, booting a PV(H) guest with vcpus < maxvcpus causes a crash.

Move setup_vcpu_hotplug_event() (and therefore setup_cpu_watcher()) to
late_initcall(). In addition, instead of performing all offlining steps
in setup_cpu_watcher() simply call disable_hotplug_cpu().

Fixes: a926f81d2f6c (xen/cpuhotplug: Replace cpu_up/down() with device_online/offline()"
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/1588976923-3667-1-git-send-email-boris.ostrovsky@oracle.com
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/efa: Fix setting of wrong bit in get/set_feature commands

[ Upstream commit cc8a635e24acf2793605f243c913c51b8c3702ab ]

When using a control buffer the ctrl_data bit should be set in order to
indicate the control buffer address is valid, not ctrl_data_indirect
which is used when the control buffer itself is indirect.

Fixes: e9c6c5373088 ("RDMA/efa: Add common command handlers")
Link: https://lore.kernel.org/r/20200512152204.93091-2-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm zoned: return NULL if dmz_get_zone_for_reclaim() fails to find a zone

[ Upstream commit 489dc0f06a5837f87482c0ce61d830d24e17082e ]

The only case where dmz_get_zone_for_reclaim() cannot return a zone is
if the respective lists are empty. So we should just return a simple
NULL value here as we really don't have an error code which would make
sense.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/kasan: Fix error detection on memory allocation

[ Upstream commit d132443a73d7a131775df46f33000f67ed92de1e ]

In case (k_start & PAGE_MASK) doesn't equal (kstart), 'va' will never be
NULL allthough 'block' is NULL

Check the return of memblock_alloc() directly instead of
the resulting address in the loop.

Fixes: 509cd3f2b473 ("powerpc/32: Simplify KASAN init")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7cb8ca82042bfc45a5cfe726c921cd7e7eeb12a3.1589866984.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/64s/pgtable: fix an undefined behaviour

[ Upstream commit c2e929b18cea6cbf71364f22d742d9aad7f4677a ]

Booting a power9 server with hash MMU could trigger an undefined
behaviour because pud_offset(p4d, 0) will do,

0 >> (PAGE_SHIFT:16 + PTE_INDEX_SIZE:8 + H_PMD_INDEX_SIZE:10)

Fix it by converting pud_index() and friends to static inline
functions.

UBSAN: shift-out-of-bounds in arch/powerpc/mm/ptdump/ptdump.c:282:15
shift exponent 34 is too large for 32-bit type 'int'
CPU: 6 PID: 1 Comm: swapper/0 Not tainted 5.6.0-rc4-next-20200303+ #13
Call Trace:
dump_stack+0xf4/0x164 (unreliable)
ubsan_epilogue+0x18/0x78
__ubsan_handle_shift_out_of_bounds+0x160/0x21c
walk_pagetables+0x2cc/0x700
walk_pud at arch/powerpc/mm/ptdump/ptdump.c:282
(inlined by) walk_pagetables at arch/powerpc/mm/ptdump/ptdump.c:311
ptdump_check_wx+0x8c/0xf0
mark_rodata_ro+0x48/0x80
kernel_init+0x74/0x194
ret_from_kernel_thread+0x5c/0x74

Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Link: https://lore.kernel.org/r/20200306044852.3236-1-cai@lca.pw
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/powernv: add NULL check after kzalloc

[ Upstream commit ceffa63acce7165c442395b7d64a11ab8b5c5dca ]

Fixes coccicheck warning:

./arch/powerpc/platforms/powernv/opal.c:813:1-5:
alloc with no test, possible model on line 814

Add NULL check after kzalloc.

Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200509020838.121660-1-chenzhou10@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: tegra: Fix flag for 64-bit resources in 'ranges' property

[ Upstream commit 3482a7afb261e2de9269a7f9ad0f4a3a82a83a53 ]

Fix flag in PCIe controllers device-tree nodes 'ranges' property to correctly
represent 64-bit resources.

Fixes: 2602c32f15e7 ("arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: tegra: Fix ethernet phy-mode for Jetson Xavier

[ Upstream commit bba25915b172c72f6fa635f091624d799e3c9cae ]

The 'phy-mode' property is currently defined as 'rgmii' for Jetson
Xavier. This indicates that the RGMII RX and TX delays are set by the
MAC and the internal delays set by the PHY are not used.

If the Marvell PHY driver is enabled, such that it is used and not the
generic PHY, ethernet failures are seen (DHCP is failing to obtain an
IP address) and this is caused because the Marvell PHY driver is
disabling the internal RX and TX delays. For Jetson Xavier the internal
PHY RX and TX delay should be used and so fix this by setting the
'phy-mode' to 'rgmii-id' and not 'rgmii'.

Fixes: f89b58ce71a9 ("arm64: tegra: Add ethernet controller on Tegra194")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fuse: copy_file_range should truncate cache

[ Upstream commit 9b46418c40fe910e6537618f9932a8be78a3dd6c ]

After the copy operation completes the cache is not up-to-date.  Truncate
all pages in the interval that has successfully been copied.

Truncating completely copied dirty pages is okay, since the data has been
overwritten anyway.  Truncating partially copied dirty pages is not okay;
add a comment for now.

Fixes: 88bc7d5097a1 ("fuse: add support for copy_file_range()")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fuse: fix copy_file_range cache issues

[ Upstream commit 2c4656dfd994538176db30ce09c02cc0dfc361ae ]

a) Dirty cache needs to be written back not just in the writeback_cache
case, since the dirty pages may come from memory maps.

b) The fuse_writeback_range() helper takes an inclusive interval, so the
end position needs to be pos+len-1 instead of pos+len.

Fixes: 88bc7d5097a1 ("fuse: add support for copy_file_range()")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: imx: scu: Fix possible memory leak in imx_scu_probe()

[ Upstream commit 89f12d6509bff004852c51cb713a439a86816b24 ]

'chan_name' is malloced in imx_scu_probe() and should be freed
before leaving from the error handling cases, otherwise it will
cause memory leak.

Fixes: edbee095fafb ("firmware: imx: add SCU firmware driver support")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: core: Fix incorrect usage of shost_for_each_device

[ Upstream commit 4dea170f4fb225984b4f2f1cf0a41d485177b905 ]

shost_for_each_device(sdev, shost) \
for ((sdev) = __scsi_iterate_devices((shost), NULL); \
     (sdev); \
     (sdev) = __scsi_iterate_devices((shost), (sdev)))

When terminating shost_for_each_device() iteration with break or return,
scsi_device_put() should be used to prevent stale scsi device references
from being left behind.

Link: https://lore.kernel.org/r/20200518074420.39275-1-yebin10@huawei.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: tcmu: Userspace must not complete queued commands

[ Upstream commit 61fb2482216679b9e1e797440c148bb143a5040a ]

When tcmu queues a new command - no matter whether in command ring or in
qfull_queue - a cmd_id from IDR udev->commands is assigned to the command.

If userspace sends a wrong command completion containing the cmd_id of a
command on the qfull_queue, tcmu_handle_completions() finds the command in
the IDR and calls tcmu_handle_completion() for it. This might do some nasty
things because commands in qfull_queue do not have a valid dbi list.

To fix this bug, we no longer add queued commands to the idr.  Instead the
cmd_id is assign when a command is written to the command ring.

Due to this change I had to adapt the source code at several places where
up to now an idr_for_each had been done.

[mkp: fix checkpatch warnings]

Link: https://lore.kernel.org/r/20200518164833.12775-1-bstroesser@ts.fujitsu.com
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix cmdq parameter of querying pf timer resource

[ Upstream commit 441c88d5b3ff80108ff536c6cf80591187015403 ]

The firmware has reduced the number of descriptions of command
HNS_ROCE_OPC_QUERY_PF_TIMER_RES to 1. The driver needs to adapt, otherwise
the hardware will report error 4(CMD_NEXT_ERR).

Fixes: 0e40dc2f70cd ("RDMA/hns: Add timer allocation support for hip08")
Link: https://lore.kernel.org/r/1588931159-56875-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Bugfix for querying qkey

[ Upstream commit 349be276509455ac2f19fa4051ed773082c6a27e ]

The qkey queried through the query ud qp verb is a fixed value and it
should be read from qp context.

Fixes: 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1588931159-56875-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: samsung: exynos5433: Add IGNORE_UNUSED flag to sclk_i2s1

[ Upstream commit 25bdae0f1c6609ceaf55fe6700654f0be2253d8e ]

Mark the SCLK clock for Exynos5433 I2S1 device with IGNORE_UNUSED flag to
match its behaviour with SCLK clock for AUD_I2S (I2S0) device until
a proper fix for Exynos I2S driver is ready.

This fixes the following synchronous abort issue revealed by the probe
order change caused by the commit 93d2e4322aa7 ("of: platform: Batch
fwnode parsing when adding all top level devices")

Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 50 Comm: kworker/0:1 Not tainted 5.7.0-rc5+ #701
Hardware name: Samsung TM2E board (DT)
Workqueue: events deferred_probe_work_func
pstate: 60000005 (nZCv daif -PAN -UAO)
pc : samsung_i2s_probe+0x768/0x8f0
lr : samsung_i2s_probe+0x688/0x8f0
...
Call trace:
 samsung_i2s_probe+0x768/0x8f0
 platform_drv_probe+0x50/0xa8
 really_probe+0x108/0x370
 driver_probe_device+0x54/0xb8
 __device_attach_driver+0x90/0xc0
 bus_for_each_drv+0x70/0xc8
 __device_attach+0xdc/0x140
 device_initial_probe+0x10/0x18
 bus_probe_device+0x94/0xa0
 deferred_probe_work_func+0x70/0xa8
 process_one_work+0x2a8/0x718
 worker_thread+0x48/0x470
 kthread+0x134/0x160
 ret_from_fork+0x10/0x1c
Code: 17ffffaf d503201f f94086c0 91003000 (88dffc00)
---[ end trace ccf721c9400ddbd6 ]---

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fpga: dfl: afu: Corrected error handling levels

[ Upstream commit c9d7e3da1f3c4cf5dddfc5d7ce4d76d013aba1cc ]

Corrected error handling goto sequnece. Level put_pages should
be called when pinned pages >= 0 && pinned != npages. Level
free_pages should be called when pinned pages < 0.

Fixes: fa8dda1edef9 ("fpga: dfl: afu: add DFL_FPGA_PORT_DMA_MAP/UNMAP ioctls support")
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/1589825991-3545-1-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: etm4x: Fix use-after-free of per-cpu etm drvdata

[ Upstream commit 3f4943d422c5febbb3c764670011a00eb2a86238 ]

etm probe could be deferred due to the dependency in the trace
path chain and may be retried. We need to clear the per-cpu
etmdrvdata entry for the etm in case of a failure to avoid
use-after-free cases as reported below:

KASAN use-after-free bug in etm4_cpu_pm_notify():

[    8.574566] coresight etm0: CPU0: ETM v4.2 initialized
[    8.581920] BUG: KASAN: use-after-free in etm4_cpu_pm_notify+0x580/0x2024
[    8.581925] Read of size 8 at addr ffffff813304f8c8 by task swapper/3/0
[    8.581927]
[    8.581934] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G S      W         5.4.28 #314
[    8.587775] coresight etm1: CPU1: ETM v4.2 initialized
[    8.594195] Call trace:
[    8.594205]  dump_backtrace+0x0/0x188
[    8.594209]  show_stack+0x20/0x2c
[    8.594216]  dump_stack+0xdc/0x144
[    8.594227]  print_address_description+0x3c/0x494
[    8.594232]  __kasan_report+0x144/0x168
[    8.601598] coresight etm2: CPU2: ETM v4.2 initialized
[    8.602563]  kasan_report+0x10/0x18
[    8.602568]  check_memory_region+0x1a4/0x1b4
[    8.602572]  __kasan_check_read+0x18/0x24
[    8.602577]  etm4_cpu_pm_notify+0x580/0x2024
[    8.665945]  notifier_call_chain+0x5c/0x90
[    8.670166]  __atomic_notifier_call_chain+0x90/0xf8
[    8.675182]  cpu_pm_notify+0x40/0x6c
[    8.678858]  cpu_pm_enter+0x38/0x80
[    8.682451]  psci_enter_idle_state+0x34/0x70
[    8.686844]  cpuidle_enter_state+0xb8/0x20c
[    8.691143]  cpuidle_enter+0x38/0x4c
[    8.694820]  call_cpuidle+0x3c/0x68
[    8.698408]  do_idle+0x1a0/0x280
[    8.701729]  cpu_startup_entry+0x24/0x28
[    8.705768]  secondary_start_kernel+0x15c/0x170
[    8.710423]
[    8.711972] Allocated by task 242:
[    8.715473]  __kasan_kmalloc+0xf0/0x1ac
[    8.719426]  kasan_slab_alloc+0x14/0x1c
[    8.723375]  __kmalloc_track_caller+0x23c/0x388
[    8.728040]  devm_kmalloc+0x38/0x94
[    8.731632]  etm4_probe+0x48/0x3c8
[    8.735140]  amba_probe+0xbc/0x158
[    8.738645]  really_probe+0x144/0x408
[    8.742412]  driver_probe_device+0x70/0x140
[    8.746716]  __device_attach_driver+0x9c/0x110
[    8.751287]  bus_for_each_drv+0x90/0xd8
[    8.755236]  __device_attach+0xb4/0x164
[    8.759188]  device_initial_probe+0x20/0x2c
[    8.763490]  bus_probe_device+0x34/0x94
[    8.767436]  device_add+0x34c/0x3e0
[    8.771029]  amba_device_try_add+0x68/0x440
[    8.775332]  amba_deferred_retry_func+0x48/0xc8
[    8.779997]  process_one_work+0x344/0x648
[    8.784127]  worker_thread+0x2ac/0x47c
[    8.787987]  kthread+0x128/0x138
[    8.791313]  ret_from_fork+0x10/0x18
[    8.794993]
[    8.796532] Freed by task 242:
[    8.799684]  __kasan_slab_free+0x15c/0x22c
[    8.803897]  kasan_slab_free+0x10/0x1c
[    8.807761]  kfree+0x25c/0x4bc
[    8.810913]  release_nodes+0x240/0x2b0
[    8.814767]  devres_release_all+0x3c/0x54
[    8.818887]  really_probe+0x178/0x408
[    8.822661]  driver_probe_device+0x70/0x140
[    8.826963]  __device_attach_driver+0x9c/0x110
[    8.831539]  bus_for_each_drv+0x90/0xd8
[    8.835487]  __device_attach+0xb4/0x164
[    8.839431]  device_initial_probe+0x20/0x2c
[    8.843732]  bus_probe_device+0x34/0x94
[    8.847678]  device_add+0x34c/0x3e0
[    8.851274]  amba_device_try_add+0x68/0x440
[    8.855576]  amba_deferred_retry_func+0x48/0xc8
[    8.860240]  process_one_work+0x344/0x648
[    8.864366]  worker_thread+0x2ac/0x47c
[    8.868228]  kthread+0x128/0x138
[    8.871557]  ret_from_fork+0x10/0x18
[    8.875231]
[    8.876782] The buggy address belongs to the object at ffffff813304f800
[    8.876782]  which belongs to the cache kmalloc-1k of size 1024
[    8.889632] The buggy address is located 200 bytes inside of
[    8.889632]  1024-byte region [ffffff813304f800, ffffff813304fc00)
[    8.901761] The buggy address belongs to the page:
[    8.906695] page:ffffffff04ac1200 refcount:1 mapcount:0 mapping:ffffff8146c03800 index:0x0 compound_mapcount: 0
[    8.917047] flags: 0x4000000000010200(slab|head)
[    8.921799] raw: 4000000000010200 dead000000000100 dead000000000122 ffffff8146c03800
[    8.929753] raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
[    8.937703] page dumped because: kasan: bad access detected
[    8.943433]
[    8.944974] Memory state around the buggy address:
[    8.949903]  ffffff813304f780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[    8.957320]  ffffff813304f800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[    8.964742] >ffffff813304f880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[    8.972157]                                               ^
[    8.977886]  ffffff813304f900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[    8.985298]  ffffff813304f980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[    8.992713] ==================================================================

Fixes: f188b5e76aae ("coresight: etm4x: Save/restore state across CPU low power states")
Reported-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-22-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: Fix support for sparsely populated ports

[ Upstream commit d375b356e687f2eefb51ddc3f1f2414cfa498f86 ]

On some systems the firmware may not describe all the ports
connected to a component (e.g, for security reasons). This
could be especially problematic for "funnels" where we could
end up in modifying memory beyond the allocated space for
refcounts.

e.g, for a funnel with input ports listed 0, 3, 5, nr_inport = 3.
However the we could access refcnts[5] while checking for
references, like :

 [  526.110401] ==================================================================
 [  526.117988] BUG: KASAN: slab-out-of-bounds in funnel_enable+0x54/0x1b0
 [  526.124706] Read of size 4 at addr ffffff8135f9549c by task bash/1114
 [  526.131324]
 [  526.132886] CPU: 3 PID: 1114 Comm: bash Tainted: G S                5.4.25 #232
 [  526.140397] Hardware name: Qualcomm Technologies, Inc. SC7180 IDP (DT)
 [  526.147113] Call trace:
 [  526.149653]  dump_backtrace+0x0/0x188
 [  526.153431]  show_stack+0x20/0x2c
 [  526.156852]  dump_stack+0xdc/0x144
 [  526.160370]  print_address_description+0x3c/0x494
 [  526.165211]  __kasan_report+0x144/0x168
 [  526.169170]  kasan_report+0x10/0x18
 [  526.172769]  check_memory_region+0x1a4/0x1b4
 [  526.177164]  __kasan_check_read+0x18/0x24
 [  526.181292]  funnel_enable+0x54/0x1b0
 [  526.185072]  coresight_enable_path+0x104/0x198
 [  526.189649]  coresight_enable+0x118/0x26c

  ...

 [  526.237782] Allocated by task 280:
 [  526.241298]  __kasan_kmalloc+0xf0/0x1ac
 [  526.245249]  kasan_kmalloc+0xc/0x14
 [  526.248849]  __kmalloc+0x28c/0x3b4
 [  526.252361]  coresight_register+0x88/0x250
 [  526.256587]  funnel_probe+0x15c/0x228
 [  526.260365]  dynamic_funnel_probe+0x20/0x2c
 [  526.264679]  amba_probe+0xbc/0x158
 [  526.268193]  really_probe+0x144/0x408
 [  526.271970]  driver_probe_device+0x70/0x140

 ...

 [  526.316810]
 [  526.318364] Freed by task 0:
 [  526.321344] (stack is not available)
 [  526.325024]
 [  526.326580] The buggy address belongs to the object at ffffff8135f95480
 [  526.326580]  which belongs to the cache kmalloc-128 of size 128
 [  526.339439] The buggy address is located 28 bytes inside of
 [  526.339439]  128-byte region [ffffff8135f95480, ffffff8135f95500)
 [  526.351399] The buggy address belongs to the page:
 [  526.356342] page:ffffffff04b7e500 refcount:1 mapcount:0 mapping:ffffff814b00c380 index:0x0 compound_mapcount: 0
 [  526.366711] flags: 0x4000000000010200(slab|head)
 [  526.371475] raw: 4000000000010200 ffffffff05034008 ffffffff0501eb08 ffffff814b00c380
 [  526.379435] raw: 0000000000000000 0000000000190019 00000001ffffffff 0000000000000000
 [  526.387393] page dumped because: kasan: bad access detected
 [  526.393128]
 [  526.394681] Memory state around the buggy address:
 [  526.399619]  ffffff8135f95380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 [  526.407046]  ffffff8135f95400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 [  526.414473] >ffffff8135f95480: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 [  526.421900]                             ^
 [  526.426029]  ffffff8135f95500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 [  526.433456]  ffffff8135f95580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 [  526.440883] ==================================================================

To keep the code simple, we now track the maximum number of
possible input/output connections to/from this component
@ nr_inport and nr_outport in platform_data, respectively.
Thus the output connections could be sparse and code is
adjusted to skip the unspecified connections.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Reported-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200518180242.7916-13-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: n_gsm: Fix bogus i++ in gsm_data_kick

[ Upstream commit 4dd31f1ffec6c370c3c2e0c605628bf5e16d5c46 ]

When submitting the previous fix "tty: n_gsm: Fix waking up upper tty
layer when room available". It was suggested to switch from a while to
a for loop, but when doing it, there was a remaining bogus i++.

This patch removes this i++ and also reorganizes the code making it more
compact.

Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20200518084517.2173242-3-gregory.clement@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: host: ehci-mxc: Add error handling in ehci_mxc_drv_probe()

[ Upstream commit d49292025f79693d3348f8e2029a8b4703be0f0a ]

The function ehci_mxc_drv_probe() does not perform sufficient error
checking after executing platform_get_irq(), thus fix it.

Fixes: 7e8d5cd93fac ("USB: Add EHCI support for MX27 and MX31 based boards")
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20200513132647.5456-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: bytcr_rt5640: Add quirk for Toshiba Encore WT8-A tablet

[ Upstream commit 0e0e10fde0e9808d1991268f5dca69fb36c025f7 ]

The Toshiba Encore WT8-A tablet almost fully works with the default
settings for non-CR Bay Trail devices. The only problem is that its
jack-detect switch is not inverted (it is active high instead of
the normal active low).

Add a quirk for this model using the default settings +
BYT_RT5640_JD_NOT_INV.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200518072416.5348-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/mdp5: Fix mdp5_init error path for failed mdp5_kms allocation

[ Upstream commit e4337877c5d578722c0716f131fb774522013cf5 ]

When allocation for mdp5_kms fails, calling mdp5_destroy() leads to undefined
behaviour, likely a nullptr exception or use-after-free troubles.

Signed-off-by: Roy Spliet <nouveau@spliet.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: Fix undefined "rd_full" link error

[ Upstream commit 20aebe83698feb107d5a66b6cfd1d54459ccdfcf ]

rd_full should be defined outside the CONFIG_DEBUG_FS region, in order
to be able to link the msm driver even when CONFIG_DEBUG_FS is disabled.

Fixes: e515af8d4a6f ("drm/msm: devcoredump should dump MSM_SUBMIT_BO_DUMP buffers")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb/ohci-platform: Fix a warning when hibernating

[ Upstream commit 1cb3b0095c3d0bb96912bfbbce4fc006d41f367c ]

The following warning was observed when attempting to suspend to disk
using a USB flash as a swap device.

[  111.779649] ------------[ cut here ]------------
[  111.788382] URB (____ptrval____) submitted while active
[  111.796646] WARNING: CPU: 3 PID: 365 at drivers/usb/core/urb.c:363 usb_submit_urb+0x3d8/0x590
[  111.805417] Modules linked in:
[  111.808584] CPU: 3 PID: 365 Comm: kworker/3:2 Not tainted 5.6.0-rc6-00002-gdfd1731f9a3e-dirty #545
[  111.817796] Hardware name: ARM Juno development board (r2) (DT)
[  111.823896] Workqueue: usb_hub_wq hub_event
[  111.828217] pstate: 60000005 (nZCv daif -PAN -UAO)
[  111.833156] pc : usb_submit_urb+0x3d8/0x590
[  111.837471] lr : usb_submit_urb+0x3d8/0x590
[  111.841783] sp : ffff800018de38b0
[  111.845205] x29: ffff800018de38b0 x28: 0000000000000003
[  111.850682] x27: ffff000970530b20 x26: ffff8000133fd000
[  111.856159] x25: ffff8000133fd000 x24: ffff800018de3b38
[  111.861635] x23: 0000000000000004 x22: 0000000000000c00
[  111.867112] x21: 0000000000000000 x20: 00000000fffffff0
[  111.872589] x19: ffff0009704e7a00 x18: ffffffffffffffff
[  111.878065] x17: 00000000a7c8f4bc x16: 000000002af33de8
[  111.883542] x15: ffff8000133fda88 x14: 0720072007200720
[  111.889019] x13: 0720072007200720 x12: 0720072007200720
[  111.894496] x11: 0000000000000000 x10: 00000000a5286134
[  111.899973] x9 : 0000000000000002 x8 : ffff000970c837a0
[  111.905449] x7 : 0000000000000000 x6 : ffff800018de3570
[  111.910926] x5 : 0000000000000001 x4 : 0000000000000003
[  111.916401] x3 : 0000000000000000 x2 : ffff800013427118
[  111.921879] x1 : 9d4e965b4b7d7c00 x0 : 0000000000000000
[  111.927356] Call trace:
[  111.929892]  usb_submit_urb+0x3d8/0x590
[  111.933852]  hub_activate+0x108/0x7f0
[  111.937633]  hub_resume+0xac/0x148
[  111.941149]  usb_resume_interface.isra.10+0x60/0x138
[  111.946265]  usb_resume_both+0xe4/0x140
[  111.950225]  usb_runtime_resume+0x24/0x30
[  111.954365]  __rpm_callback+0xdc/0x138
[  111.958236]  rpm_callback+0x34/0x98
[  111.961841]  rpm_resume+0x4a8/0x720
[  111.965445]  rpm_resume+0x50c/0x720
[  111.969049]  __pm_runtime_resume+0x4c/0xb8
[  111.973276]  usb_autopm_get_interface+0x28/0x60
[  111.977948]  hub_event+0x80/0x16d8
[  111.981466]  process_one_work+0x2a4/0x748
[  111.985604]  worker_thread+0x48/0x498
[  111.989387]  kthread+0x13c/0x140
[  111.992725]  ret_from_fork+0x10/0x18
[  111.996415] irq event stamp: 354
[  111.999756] hardirqs last  enabled at (353): [<ffff80001019ea1c>] console_unlock+0x504/0x5b8
[  112.008441] hardirqs last disabled at (354): [<ffff8000100a95d0>] do_debug_exception+0x1a8/0x258
[  112.017479] softirqs last  enabled at (350): [<ffff8000100818a4>] __do_softirq+0x4bc/0x568
[  112.025984] softirqs last disabled at (343): [<ffff8000101145a4>] irq_exit+0x144/0x150
[  112.034129] ---[ end trace dc96030b9cf6c8a3 ]---

The problem was tracked down to a missing call to
pm_runtime_set_active() on resume in ohci-platform.

Link: https://lore.kernel.org/lkml/20200323143857.db5zphxhq4hz3hmd@e107158-lin.cambridge.arm.com/
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
CC: Tony Prisk <linux@prisktech.co.nz>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Mathias Nyman <mathias.nyman@intel.com>
CC: Oliver Neukum <oneukum@suse.de>
CC: linux-arm-kernel@lists.infradead.org
CC: linux-usb@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20200518154931.6144-1-qais.yousef@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio-pci: Mask cap zero

[ Upstream commit bc138db1b96264b9c1779cf18d5a3b186aa90066 ]

The PCI Code and ID Assignment Specification changed capability ID 0
from reserved to a NULL capability in the v1.1 revision.  The NULL
capability is defined to include only the 16-bit capability header,
ie. only the ID and next pointer.  Unfortunately vfio-pci creates a
map of config space, where ID 0 is used to reserve the standard type
0 header.  Finding an actual capability with this ID therefore results
in a bogus range marked in that map and conflicts with subsequent
capabilities.  As this seems to be a dummy capability anyway and we
already support dropping capabilities, let's hide this one rather than
delving into the potentially subtle dependencies within our map.

Seen on an NVIDIA Tesla T4.

Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/arm-smmu-v3: Don't reserve implementation defined register space

[ Upstream commit 52f3fab0067d6fa9e99c1b7f63265dd48ca76046 ]

Some SMMUv3 implementation embed the Perf Monitor Group Registers (PMCG)
inside the first 64kB region of the SMMU. Since PMCG are managed by a
separate driver, this layout causes resource reservation conflicts
during boot.

To avoid this conflict, don't reserve the MMIO regions that are
implementation defined. Although devm_ioremap_resource() still works on
full pages under the hood, this way we benefit from resource conflict
checks.

Fixes: 7d839b4b9e00 ("perf/smmuv3: Add arm64 smmuv3 pmu driver")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20200513110255.597203-1-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/ps3: Fix kexec shutdown hang

[ Upstream commit 126554465d93b10662742128918a5fc338cda4aa ]

The ps3_mm_region_destroy() and ps3_mm_vas_destroy() routines
are called very late in the shutdown via kexec's mmu_cleanup_all
routine.  By the time mmu_cleanup_all runs it is too late to use
udbg_printf, and calling it will cause PS3 systems to hang.

Remove all debugging statements from ps3_mm_region_destroy() and
ps3_mm_vas_destroy() and replace any error reporting with calls
to lv1_panic.

With this change builds with 'DEBUG' defined will not cause kexec
reboots to hang, and builds with 'DEBUG' defined or not will end
in lv1_panic if an error is encountered.

Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7325c4af2b4c989c19d6a26b90b1fec9c0615ddf.1589049250.git.geoff@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: cadence: sierra: Fix for USB3 U1/U2 state

[ Upstream commit 2bcf14ca1a2f3202954f812f380c7fa8127fbd7f ]

Updated values of USB3 related Sierra PHY registers.
This change fixes USB3 device disconnect issue observed
while enternig U1/U2 state.

Signed-off-by: Sanket Parmar <sparmar@cadence.com>
Link: https://lore.kernel.org/r/1589804053-14302-1-git-send-email-sparmar@cadence.com
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: phy: sr-usb: do not use internal fsm for USB2 phy init

[ Upstream commit 6f0577d1411337a0d97d545abe4a784e9e611516 ]

During different reboot cycles, USB PHY PLL may not always lock
during initialization and therefore can cause USB to be not usable.

Hence do not use internal FSM programming sequence for the USB
PHY initialization.

Fixes: 4dcddbb38b64 ("phy: sr-usb: Add Stingray USB PHY driver")
Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com>
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Link: https://lore.kernel.org/r/20200513173947.10919-1-rayagonda.kokatanur@broadcom.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: aardvark: Issue PERST via GPIO

[ Upstream commit 5169a9851daaa2782a7bd2bb83d5b1bd224b2879 ]

Add support for issuing PERST via GPIO specified in 'reset-gpios'
property (as described in PCI device tree bindings).

Some buggy cards (e.g. Compex WLE900VX or WLE1216) are not detected
after reboot when PERST is not issued during driver initialization.

If bootloader already enabled link training then issuing PERST has no
effect for some buggy cards (e.g. Compex WLE900VX) and these cards are
not detected. We therefore clear the LINK_TRAINING_EN register before.

It was observed that Compex WLE900VX card needs to be in PERST reset
for at least 10ms if bootloader enabled link training.

Tested on Turris MOX.

Link: https://lore.kernel.org/r/20200430080625.26070-6-pali@kernel.org
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: aardvark: Improve link training

[ Upstream commit 43fc679ced18006b12d918d7a8a4af392b7fbfe7 ]

Currently the aardvark driver trains link in PCIe gen2 mode. This may
cause some buggy gen1 cards (such as Compex WLE900VX) to be unstable or
even not detected. Moreover when ASPM code tries to retrain link second
time, these cards may stop responding and link goes down. If gen1 is
used this does not happen.

Unconditionally forcing gen1 is not a good solution since it may have
performance impact on gen2 cards.

To overcome this, read 'max-link-speed' property (as defined in PCI
device tree bindings) and use this as max gen mode. Then iteratively try
link training at this mode or lower until successful. After successful
link training choose final controller gen based on Negotiated Link Speed
from Link Status register, which should match card speed.

Link: https://lore.kernel.org/r/20200430080625.26070-5-pali@kernel.org
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: aardvark: Train link immediately after enabling training

[ Upstream commit 6964494582f56a3882c2c53b0edbfe99eb32b2e1 ]

Adding even 100ms (PCI_PM_D3COLD_WAIT) delay between enabling link
training and starting link training causes detection issues with some
buggy cards (such as Compex WLE900VX).

Move the code which enables link training immediately before the one
which starts link traning.

This fixes detection issues of Compex WLE900VX card on Turris MOX after
cold boot.

Link: https://lore.kernel.org/r/20200430080625.26070-2-pali@kernel.org
Fixes: f4c7d053d7f7 ("PCI: aardvark: Wait for endpoint to be ready...")
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries/ras: Fix FWNMI_VALID off by one

[ Upstream commit deb70f7a35a22dffa55b2c3aac71bc6fb0f486ce ]

This was discovered developing qemu fwnmi sreset support. This
off-by-one bug means the last 16 bytes of the rtas area can not
be used for a 16 byte save area.

It's not a serious bug, and QEMU implementation has to retain a
workaround for old kernels, but it's good to tighten it.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200508043408.886394-7-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/64s/exceptions: Machine check reconcile irq state

[ Upstream commit f0fd9dd3c213c947dfb5bc2cad3ef5e30d3258ec ]

pseries fwnmi machine check code pops the soft-irq checks in rtas_call
(after the next patch to remove rtas_token from this call path).
Rather than play whack a mole with these and forever having fragile
code, it seems better to have the early machine check handler perform
the same kind of reconcile as the other NMI interrupts.

  WARNING: CPU: 0 PID: 493 at arch/powerpc/kernel/irq.c:343
  CPU: 0 PID: 493 Comm: a Tainted: G        W
  NIP:  c00000000001ed2c LR: c000000000042c40 CTR: 0000000000000000
  REGS: c0000001fffd38b0 TRAP: 0700   Tainted: G        W
  MSR:  8000000000021003 <SF,ME,RI,LE>  CR: 28000488  XER: 00000000
  CFAR: c00000000001ec90 IRQMASK: 0
  GPR00: c000000000043820 c0000001fffd3b40 c0000000012ba300 0000000000000000
  GPR04: 0000000048000488 0000000000000000 0000000000000000 00000000deadbeef
  GPR08: 0000000000000080 0000000000000000 0000000000000000 0000000000001001
  GPR12: 0000000000000000 c0000000014a0000 0000000000000000 0000000000000000
  GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR28: 0000000000000000 0000000000000001 c000000001360810 0000000000000000
  NIP [c00000000001ed2c] arch_local_irq_restore.part.0+0xac/0x100
  LR [c000000000042c40] unlock_rtas+0x30/0x90
  Call Trace:
  [c0000001fffd3b40] [c000000001360810] 0xc000000001360810 (unreliable)
  [c0000001fffd3b60] [c000000000043820] rtas_call+0x1c0/0x280
  [c0000001fffd3bb0] [c0000000000dc328] fwnmi_release_errinfo+0x38/0x70
  [c0000001fffd3c10] [c0000000000dcd8c] pseries_machine_check_realmode+0x1dc/0x540
  [c0000001fffd3cd0] [c00000000003fe04] machine_check_early+0x54/0x70
  [c0000001fffd3d00] [c000000000008384] machine_check_early_common+0x134/0x1f0
  --- interrupt: 200 at 0x13f1307c8
      LR = 0x7fff888b8528
  Instruction dump:
  60000000 7d2000a6 71298000 41820068 39200002 7d210164 4bffff9c 60000000
  60000000 7d2000a6 71298000 4c820020 <0fe00000> 4e800020 60000000 60000000

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200508043408.886394-5-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/64s/exception: Fix machine check no-loss idle wakeup

[ Upstream commit 8a5054d8cbbe03c68dcb0957c291c942132e4101 ]

The architecture allows for machine check exceptions to cause idle
wakeups which resume at the 0x200 address which has to return via
the idle wakeup code, but the early machine check handler is run
first.

The case of a no state-loss sleep is broken because the early
handler uses non-volatile register r1 , which is needed for the wakeup
protocol, but it is not restored.

Fix this by loading r1 from the MCE exception frame before returning
to the idle wakeup code. Also update the comment which has become
stale since the idle rewrite in C.

This crash was found and fix confirmed with a machine check injection
test in qemu powernv model (which is not upstream in qemu yet).

Fixes: 10d91611f426d ("powerpc/64s: Reimplement book3s idle code in C")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200508043408.886394-2-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: codecs: rt*-sdw: fix memory leak in set_sdw_stream()

[ Upstream commit 07b542fe831cbefce163ad1b3aa7292c8a6332b8 ]

Now that the sdw_stream is allocated in machine driver,
set_sdw_stream() is also called with a NULL argument during the
dailink shutdown.

In this case, the drivers should not allocate any memory, and just
return.

Detected with KASAN/kmemleak.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Cc: Oder Chiou <oder_chiou@realtek.com>
Cc: Shuming Fan <shumingf@realtek.com>
Cc: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/20200515211531.11416-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipmi: use vzalloc instead of kmalloc for user creation

[ Upstream commit 7c47a219b95d0e06b5ef5fcc7bad807895015eac ]

We met mulitple times of failure of staring bmc-watchdog,
due to the runtime memory allocation failure of order 4.

     bmc-watchdog: page allocation failure: order:4, mode:0x40cc0(GFP_KERNEL|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0-1
     CPU: 1 PID: 2571 Comm: bmc-watchdog Not tainted 5.5.0-00045-g7d6bb61d6188c #1
     Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.00.01.0015.110720180833 11/07/2018
     Call Trace:
      dump_stack+0x66/0x8b
      warn_alloc+0xfe/0x160
      __alloc_pages_slowpath+0xd3e/0xd80
      __alloc_pages_nodemask+0x2f0/0x340
      kmalloc_order+0x18/0x70
      kmalloc_order_trace+0x1d/0xb0
      ipmi_create_user+0x55/0x2c0 [ipmi_msghandler]
      ipmi_open+0x72/0x110 [ipmi_devintf]
      chrdev_open+0xcb/0x1e0
      do_dentry_open+0x1ce/0x380
      path_openat+0x305/0x14f0
      do_filp_open+0x9b/0x110
      do_sys_open+0x1bd/0x250
      do_syscall_64+0x5b/0x1f0
      entry_SYSCALL_64_after_hwframe+0x44/0xa9

Using vzalloc/vfree for creating ipmi_user heals the
problem

Thanks to Stephen Rothwell for finding the vmalloc.h
inclusion issue.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: ocelot: Always register GPIO driver

[ Upstream commit 550713e33f4338c8596776828a936fd1e3bf35de ]

This fixes the situation where the GPIO controller is not
used as an interrupt controller as well.

Previously, the driver would silently fail to register even the
GPIO's. With this change, the driver will only register as an
interrupt controller if a parent interrupt is provided.

Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Link: https://lore.kernel.org/r/20200513125532.24585-2-lars.povlsen@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio function

[ Upstream commit 715878016984b2617f6c1f177c50039e12e7bd5b ]

We found out that we are unable to control the PERST# signal via the
default pin dedicated to be PERST# pin (GPIO2[3] pin) on A3700 SOC when
this pin is in EP_PCIE1_Resetn mode. There is a register in the PCIe
register space called PERSTN_GPIO_EN (D0088004[3]), but changing the
value of this register does not change the pin output when measuring
with voltmeter.

We do not know if this is a bug in the SOC, or if it works only when
PCIe controller is in a certain state.

Commit f4c7d053d7f7 ("PCI: aardvark: Wait for endpoint to be ready
before training link") says that when this pin changes pinctrl mode
from EP_PCIE1_Resetn to GPIO, the PERST# signal is asserted for a brief
moment.

So currently the situation is that on A3700 boards the PERST# signal is
asserted in U-Boot (because the code in U-Boot issues reset via this pin
via GPIO mode), and then in Linux by the obscure and undocumented
mechanism described by the above mentioned commit.

We want to issue PERST# signal in a known way, therefore this patch
changes the pcie_reset_pin function from "pcie" to "gpio" and adds the
reset-gpios property to the PCIe node in device tree files of
EspressoBin and Armada 3720 Dev Board (Turris Mox device tree already
has this property and uDPU does not have a PCIe port).

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Remi Pommarel <repk@triplefau.lt>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

habanalabs: increase timeout during reset

[ Upstream commit 7a65ee046b2238e053f6ebb610e1a082cfc49490 ]

When doing training, the DL framework (e.g. tensorflow) performs hundreds
of thousands of memory allocations and mappings. In case the driver needs
to perform hard-reset during training, the driver kills the application and
unmaps all those memory allocations. Unfortunately, because of that large
amount of mappings, the driver isn't able to do that in the current timeout
(5 seconds). Therefore, increase the timeout significantly to 30 seconds
to avoid situation where the driver resets the device with active mappings,
which sometime can cause a kernel bug.

BTW, it doesn't mean we will spend all the 30 seconds because the reset
thread checks every one second if the unmap operation is done.

Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI/PM: Assume ports without DLL Link Active train links in 100 ms

[ Upstream commit ec411e02b7a2e785a4ed9ed283207cd14f48699d ]

Kai-Heng Feng reported that it takes a long time (> 1 s) to resume
Thunderbolt-connected devices from both runtime suspend and system sleep
(s2idle).

This was because some Downstream Ports that support > 5 GT/s do not also
support Data Link Layer Link Active reporting.  Per PCIe r5.0 sec 6.6.1:

  With a Downstream Port that supports Link speeds greater than 5.0 GT/s,
  software must wait a minimum of 100 ms after Link training completes
  before sending a Configuration Request to the device immediately below
  that Port. Software can determine when Link training completes by polling
  the Data Link Layer Link Active bit or by setting up an associated
  interrupt (see Section 6.7.3.3).

Sec 7.5.3.6 requires such Ports to support DLL Link Active reporting, but
at least the Intel JHL6240 Thunderbolt 3 Bridge [8086:15c0] and the Intel
JHL7540 Thunderbolt 3 Bridge [8086:15ea] do not.

Previously we tried to wait for Link training to complete, but since there
was no DLL Link Active reporting, all we could do was wait the worst-case
1000 ms, then another 100 ms.

Instead of using the supported speeds to determine whether to wait for Link
training, check whether the port supports DLL Link Active reporting.  The
Ports in question do not, so we'll wait only the 100 ms required for Ports
that support Link speeds <= 5 GT/s.

This of course assumes these Ports always train the Link within 100 ms even
if they are operating at > 5 GT/s, which is not required by the spec.

[bhelgaas: commit log, comment]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206837
Link: https://lore.kernel.org/r/20200514133043.27429-1-mika.westerberg@linux.intel.com
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: Add quirks for Trust Panora Graphic Tablet

[ Upstream commit fb68ada81e65d593b51544fa43c284322107a742 ]

The Trust Panora Graphic Tablet has two interfaces. Interface zero reports pen
movement, pen pressure and pen buttons. Interface one reports tablet buttons
and tablet scroll. Both use the mouse protocol.

Without these quirks, libinput gets confused about what device it talks to.

For completeness, here is the usbhid-dump:

```
$ sudo usbhid-dump -d 145f:0212
003:013:001:DESCRIPTOR         1588949402.559961
 05 0D 09 01 A1 01 85 07 A1 02 09 00 75 08 95 07
 81 02 C0 C0 09 0E A1 01 85 05 09 23 A1 02 09 52
 09 53 25 0A 75 08 95 02 B1 02 C0 C0 05 0C 09 36
 A1 00 85 06 05 09 19 01 29 20 15 00 25 01 95 20
 75 01 81 02 C0

003:013:000:DESCRIPTOR         1588949402.563942
 05 01 09 02 A1 01 85 08 09 01 A1 00 05 09 19 01
 29 03 15 00 25 01 95 03 75 01 81 02 95 05 81 01
 05 01 09 30 09 31 09 38 09 00 15 81 25 7F 75 08
 95 04 81 06 C0 C0 05 01 09 02 A1 01 85 09 09 01
 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01
 81 02 95 05 81 01 05 01 09 30 09 31 26 FF 7F 95
 02 75 10 81 02 05 0D 09 30 26 FF 03 95 01 75 10
 81 02 C0 C0 05 01 09 00 A1 01 85 04 A1 00 26 FF
 00 09 00 75 08 95 07 B1 02 C0 C0
```

Signed-off-by: Cristian Klein <cristian.klein@elastisys.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: Add duplex sound support for USB devices using implicit feedback

[ Upstream commit 10ce77e4817fef99e1166be7e6685a80c63bf77f ]

For USB sound devices using implicit feedback the endpoint used for
this feedback should be able to be opened twice, once for required
feedback and second time for audio data. This way these devices can be
put in duplex audio mode. Since this only works if the settings of the
endpoint don't change a check is included for this.

This fixes bug 207023 ("MOTU M2 regression on duplex audio") and
should also fix bug 103751 ("M-Audio Fast Track Ultra usb audio device
will not operate full-duplex")

Fixes: c249177944b6 ("ALSA: usb-audio: add implicit fb quirk for MOTU M Series")
Signed-off-by: Erwin Burema <e.burema@gmail.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207023
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=103751
Link: https://lore.kernel.org/r/2410739.SCZni40SNb@alpha-wolf
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: fixing upper volume limit for RME Babyface Pro routing crosspoints

[ Upstream commit 47b4f5f5b65680fbef7a7a9a4796b35f38a6e43e ]

In my initial patch, these were set too low.

Fixes: 3e8f3bd04716 ("ALSA: usb-audio: RME Babyface Pro mixer patch")
Signed-off-by: Thomas Ebeling <penguins@bollie.de>
Link: https://lore.kernel.org/r/20200515114556.vtspnonzvp4xp44m@bollie.ca9.eu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: wfx: fix value of scan timeout

[ Upstream commit 6598b12d6635e8e3060863b84c04e472546ee126 ]

Before to start the scan request, the firmware signals (with a null
frame) to the AP it won't be able to receive data. This frame can be
long to send: up to 512TU. The current calculus of the scan timeout does
not take into account this delay.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200515083325.378539-5-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: n_gsm: Fix waking up upper tty layer when room available

[ Upstream commit 01dbb362f0a114fbce19c8abe4cd6f4710e934d5 ]

Warn the upper layer when n_gms is ready to receive data
again. Without this the associated virtual tty remains blocked
indefinitely.

Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20200512115323.1447922-4-gregory.clement@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: n_gsm: Fix SOF skipping

[ Upstream commit 84d6f81c1fb58b56eba81ff0a36cf31946064b40 ]

For at least some modems like the TELIT LE910, skipping SOF makes
transfers blocking indefinitely after a short amount of data
transferred.

Given the small improvement provided by skipping the SOF (just one
byte on about 100 bytes), it seems better to completely remove this
"feature" than make it optional.

Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20200512115323.1447922-3-gregory.clement@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/64: Don't initialise init_task->thread.regs

[ Upstream commit 7ffa8b7dc11752827329e4e84a574ea6aaf24716 ]

Aneesh increased the size of struct pt_regs by 16 bytes and started
seeing this WARN_ON:

  smp: Bringing up secondary CPUs ...
  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 0 at arch/powerpc/kernel/process.c:455 giveup_all+0xb4/0x110
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+ #318
  NIP:  c00000000001a2b4 LR: c00000000001a29c CTR: c0000000031d0000
  REGS: c0000000026d3980 TRAP: 0700   Not tainted  (5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+)
  MSR:  800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE>  CR: 48048224  XER: 00000000
  CFAR: c000000000019cc8 IRQMASK: 1
  GPR00: c00000000001a264 c0000000026d3c20 c0000000026d7200 800000000280b033
  GPR04: 0000000000000001 0000000000000000 0000000000000077 30206d7372203164
  GPR08: 0000000000002000 0000000002002000 800000000280b033 3230303030303030
  GPR12: 0000000000008800 c0000000031d0000 0000000000800050 0000000002000066
  GPR16: 000000000309a1a0 000000000309a4b0 000000000309a2d8 000000000309a890
  GPR20: 00000000030d0098 c00000000264da40 00000000fd620000 c0000000ff798080
  GPR24: c00000000264edf0 c0000001007469f0 00000000fd620000 c0000000020e5e90
  GPR28: c00000000264edf0 c00000000264d200 000000001db60000 c00000000264d200
  NIP [c00000000001a2b4] giveup_all+0xb4/0x110
  LR [c00000000001a29c] giveup_all+0x9c/0x110
  Call Trace:
  [c0000000026d3c20] [c00000000001a264] giveup_all+0x64/0x110 (unreliable)
  [c0000000026d3c90] [c00000000001ae34] __switch_to+0x104/0x480
  [c0000000026d3cf0] [c000000000e0b8a0] __schedule+0x320/0x970
  [c0000000026d3dd0] [c000000000e0c518] schedule_idle+0x38/0x70
  [c0000000026d3df0] [c00000000019c7c8] do_idle+0x248/0x3f0
  [c0000000026d3e70] [c00000000019cbb8] cpu_startup_entry+0x38/0x40
  [c0000000026d3ea0] [c000000000011bb0] rest_init+0xe0/0xf8
  [c0000000026d3ed0] [c000000002004820] start_kernel+0x990/0x9e0
  [c0000000026d3f90] [c00000000000c49c] start_here_common+0x1c/0x400

Which was unexpected. The warning is checking the thread.regs->msr
value of the task we are switching from:

  usermsr = tsk->thread.regs->msr;
  ...
  WARN_ON((usermsr & MSR_VSX) && !((usermsr & MSR_FP) && (usermsr & MSR_VEC)));

ie. if MSR_VSX is set then both of MSR_FP and MSR_VEC are also set.

Dumping tsk->thread.regs->msr we see that it's: 0x1db60000

Which is not a normal looking MSR, in fact the only valid bit is
MSR_VSX, all the other bits are reserved in the current definition of
the MSR.

We can see from the oops that it was swapper/0 that we were switching
from when we hit the warning, ie. init_task. So its thread.regs points
to the base (high addresses) in init_stack.

Dumping the content of init_task->thread.regs, with the members of
pt_regs annotated (the 16 bytes larger version), we see:

  0000000000000000 c000000002780080    gpr[0]     gpr[1]
  0000000000000000 c000000002666008    gpr[2]     gpr[3]
  c0000000026d3ed0 0000000000000078    gpr[4]     gpr[5]
  c000000000011b68 c000000002780080    gpr[6]     gpr[7]
  0000000000000000 0000000000000000    gpr[8]     gpr[9]
  c0000000026d3f90 0000800000002200    gpr[10]    gpr[11]
  c000000002004820 c0000000026d7200    gpr[12]    gpr[13]
  000000001db60000 c0000000010aabe8    gpr[14]    gpr[15]
  c0000000010aabe8 c0000000010aabe8    gpr[16]    gpr[17]
  c00000000294d598 0000000000000000    gpr[18]    gpr[19]
  0000000000000000 0000000000001ff8    gpr[20]    gpr[21]
  0000000000000000 c00000000206d608    gpr[22]    gpr[23]
  c00000000278e0cc 0000000000000000    gpr[24]    gpr[25]
  000000002fff0000 c000000000000000    gpr[26]    gpr[27]
  0000000002000000 0000000000000028    gpr[28]    gpr[29]
  000000001db60000 0000000004750000    gpr[30]    gpr[31]
  0000000002000000 000000001db60000    nip        msr
  0000000000000000 0000000000000000    orig_r3    ctr
  c00000000000c49c 0000000000000000    link       xer
  0000000000000000 0000000000000000    ccr        softe
  0000000000000000 0000000000000000    trap       dar
  0000000000000000 0000000000000000    dsisr      result
  0000000000000000 0000000000000000    ppr        kuap
  0000000000000000 0000000000000000    pad[2]     pad[3]

This looks suspiciously like stack frames, not a pt_regs. If we look
closely we can see return addresses from the stack trace above,
c000000002004820 (start_kernel) and c00000000000c49c (start_here_common).

init_task->thread.regs is setup at build time in processor.h:

  #define INIT_THREAD  { \
   .ksp = INIT_SP, \
   .regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \

The early boot code where we setup the initial stack is:

  LOAD_REG_ADDR(r3,init_thread_union)

  /* set up a stack pointer */
  LOAD_REG_IMMEDIATE(r1,THREAD_SIZE)
  add r1,r3,r1
  li r0,0
  stdu r0,-STACK_FRAME_OVERHEAD(r1)

Which creates a stack frame of size 112 bytes (STACK_FRAME_OVERHEAD).
Which is far too small to contain a pt_regs.

So the result is init_task->thread.regs is pointing at some stack
frames on the init stack, not at a pt_regs.

We have gotten away with this for so long because with pt_regs at its
current size the MSR happens to point into the first frame, at a
location that is not written to by the early asm. With the 16 byte
expansion the MSR falls into the second frame, which is used by the
compiler, and collides with a saved register that tends to be
non-zero.

As far as I can see this has been wrong since the original merge of
64-bit ppc support, back in 2002.

Conceptually swapper should have no regs, it never entered from
userspace, and in fact that's what we do on 32-bit. It's also
presumably what the "bogus" comment is referring to.

So I think the right fix is to just not-initialise regs at all. I'm
slightly worried this will break some code that isn't prepared for a
NULL regs, but we'll have to see.

Remove the comment in head_64.S which refers to us setting up the
regs (even though we never did), and is otherwise not really accurate
any more.

Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200428123130.73078-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Fix pci_register_host_bridge() device_register() error handling

[ Upstream commit 1b54ae8327a4d630111c8d88ba7906483ec6010b ]

If device_register() has an error, we should bail out of
pci_register_host_bridge() rather than continuing on.

Fixes: 37d6a0a6f470 ("PCI: Add pci_register_host_bridge() interface")
Link: https://lore.kernel.org/r/20200513223859.11295-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: ti: composite: fix memory leak

[ Upstream commit c7c1cbbc9217ebb5601b88d138d4a5358548de9d ]

The parent_names is never released for a component clock definition,
causing some memory leak. Fix by releasing it once it is no longer
needed.

Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lkml.kernel.org/r/20200429131341.4697-2-t-kristo@ti.com
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: c630: Add WiFi node

[ Upstream commit 3fb298d0b2f2a1d47d53806d4ddf8f4ae83353cc ]

Specify regulators and enable the &wifi node. The firmware uses the 8
bit version of the host capability message, so specify this quirk.

Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20191018055841.3729591-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: db820c: Fix invalid pm8994 supplies

[ Upstream commit 1cacdf5d3bb9644ac7b9339c611ac5b9dd90d09d ]

It's uncertain where the "vreg_s8a_l3a_input" comes from, but the supply
for VDD_L3_L11 on PM8994 should be VREG_S3A_1P3, so correct this - and
drop the vreg_s8a_l3a_input.

Reviewed-by: Vinod Koul <vkoul@kernel.org>
Fixes: 83d9ed4342a3 ("arm64: dts: qcom: db820c: Use regulator names from schematics")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200417070712.1376355-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: ohci-sm501: fix error return code in ohci_hcd_sm501_drv_probe()

[ Upstream commit b919e077cccfbb77beb98809568b2fb0b4d113ec ]

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 7d9e6f5aebe8 ("usb: host: ohci-sm501: init genalloc for local memory")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200506135625.106910-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: ti: j721e-wiz: Fix some error return code in wiz_probe()

[ Upstream commit e2ae8bca494481a9f38fcd1d52943ac04e654745 ]

Fix to return negative error code from some error handling
cases instead of 0, as done elsewhere in this function.

Fixes: 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Link: https://lore.kernel.org/r/20200507054109.110849-1-weiyongjun1@huawei.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dlm: remove BUG() before panic()

[ Upstream commit fe204591cc9480347af7d2d6029b24a62e449486 ]

Building a kernel with clang sometimes fails with an objtool error in dlm:

fs/dlm/lock.o: warning: objtool: revert_lock_pc()+0xbd: can't find jump dest instruction at .text+0xd7fc

The problem is that BUG() never returns and the compiler knows
that anything after it is unreachable, however the panic still
emits some code that does not get fully eliminated.

Having both BUG() and panic() is really pointless as the BUG()
kills the current process and the subsequent panic() never hits.
In most cases, we probably don't really want either and should
replace the DLM_ASSERT() statements with WARN_ON(), as has
been done for some of them.

Remove the BUG() here so the user at least sees the panic message
and we can reliably build randconfig kernels.

Fixes: e7fd41792fc0 ("[DLM] The core of the DLM for GFS2/CLVM")
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: clang-built-linux@googlegroups.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

remoteproc: qcom_q6v5_mss: Drop accesses to MPSS PERPH register space

[ Upstream commit a9fdc79d488623d36341f0f3d08f5aa1bedb9d53 ]

7C retail devices using MSA based boot will result in a fuse combination
which will prevent accesses to MSS PERPH register space where the mpss
clocks and halt-nav reside. So drop all accesses to the MPSS PERPH
register space. Issuing HALT NAV request and turning on the mss clocks
as part of SSR will no longer be required since the modem firmware will
have the necessary fixes to ensure that there are no pending NAV DMA
transactions.

Tested-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200415145110.20624-3-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: rockchip: fix memleak in rockchip_dt_node_to_map

[ Upstream commit d7faa8ffb6be57bf8233a4b5a636d76b83c51ce7 ]

In function rockchip_dt_node_to_map, a new_map variable is
allocated by:

new_map = devm_kcalloc(pctldev->dev, map_num, sizeof(*new_map),
       GFP_KERNEL);

This uses devres and attaches new_map to the pinctrl driver.
This cause a leak since new_map is not released when the probed
driver is removed. Fix it by using kcalloc to allocate new_map
and free it in `rockchip_dt_free_map`

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20200506100903.15420-1-dafna.hirschfeld@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: ti: omap-mcbsp: Fix an error handling path in 'asoc_mcbsp_probe()'

[ Upstream commit 03990fd58d2b7c8f7d53e514ba9b8749fac260f9 ]

If an error occurs after the call to 'omap_mcbsp_init()', the reference to
'mcbsp->fclk' must be decremented, as already done in the remove function.

This can be achieved easily by using the devm_ variant of 'clk_get()'
when the reference is taken in 'omap_mcbsp_init()'

This fixes the leak in the probe and has the side effect to simplify both
the error handling path of 'omap_mcbsp_init()' and the remove function.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Peter Ujfalusi <peter.ujflausi@ti.com>
Link: https://lore.kernel.org/r/20200512134325.252073-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: ux500: mop500: Fix some refcounted resources issues

[ Upstream commit 4e8748fcaeec073e3ba794871ce86c545e4f961f ]

There are 2 issues here:
   - if one of the 'of_parse_phandle' fails, calling 'mop500_of_node_put()'
     is a no-op because the 'mop500_dai_links' structure has not been
     initialized yet, so the referenced are not decremented
   - The reference stored in 'mop500_dai_links[i].codecs' is refcounted
     only once in the probe and must be decremented only once.

Fixes: 39013bd60e79 ("ASoC: Ux500: Dispose of device nodes correctly")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20200512100705.246349-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SoC: rsnd: add interrupt support for SSI BUSIF buffer

[ Upstream commit 66c705d07d784fb6b4622c6e47b6acae357472db ]

SSI BUSIF buffer is possible to overflow or underflow, especially in a
hypervisor environment. If there is no interrupt support, it will eventually
lead to errors in pcm data.
This patch adds overflow and underflow interrupt support for SSI BUSIF buffer.

Reported-by: Chen Li <licheng0822@thundersoft.com>
Signed-off-by: Yongbo Zhang <giraffesnn123@gmail.com>
Tested-by: Chen Li <licheng0822@thundersoft.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200512093003.28332-1-giraffesnn123@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

unicore32: do not evaluate compiler's library path when cleaning

[ Upstream commit 081b4b54ff6c58be2ffcf09d42e5df8f031eacd0 ]

Since commit a83e4ca26af8 ("kbuild: remove cc-option switch from
-Wframe-larger-than="), 'make ARCH=unicore32 clean' emits error
messages as follows:

  $ make ARCH=unicore32 clean
  gcc: error: missing argument to '-Wframe-larger-than='
  gcc: error: missing argument to '-Wframe-larger-than='

We do not care compiler flags when cleaning.

Use the '=' operator for lazy expansion because we do not use
GNU_LIBC_A or GNU_LIBGCC_A when cleaning.

Fixes: a83e4ca26af8 ("kbuild: remove cc-option switch from -Wframe-larger-than=")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: do not evaluate compiler's library path when cleaning

[ Upstream commit 7e49afc03212010d0ee27532a75cfeb0125bd868 ]

Since commit a83e4ca26af8 ("kbuild: remove cc-option switch from
-Wframe-larger-than="), 'make ARCH=um clean' emits an error message
as follows:

  $ make ARCH=um clean
  gcc: error: missing argument to '-Wframe-larger-than='

We do not care compiler flags when cleaning.

Use the '=' operator for lazy expansion because we do not use
LDFLAGS_pcap.o or LDFLAGS_vde.o when cleaning.

While I was here, I removed the redundant -r option because it
already exists in the recipe.

Fixes: a83e4ca26af8 ("kbuild: remove cc-option switch from -Wframe-larger-than=")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com> [build]
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: compress: fix zstd data corruption

[ Upstream commit 1454c978efbb57b052670d50023f48c759d704ce ]

During zstd compression, ZSTD_endStream() may return non-zero value
because distination buffer is full, but there is still compressed data
remained in intermediate buffer, it means that zstd algorithm can not
save at last one block space, let's just writeback raw data instead of
compressed one, this can fix data corruption when decompressing
incomplete stored compression data.

Fixes: 50cfa66f0de0 ("f2fs: compress: support zstd compress algorithm")
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix potential use-after-free issue

[ Upstream commit f3494345ce9999624b36109252a4bf5f00e51a46 ]

In error path of f2fs_read_multi_pages(), it should let last referrer
release decompress io context memory, otherwise, other referrer will
cause use-after-free issue.

Fixes: 4c8ff7095bef ("f2fs: support data compression")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: Fix wrong stub helper update_sit_info

[ Upstream commit 48abe91ac1ad27cd5a5709f983dcf58f2b9a6b70 ]

update_sit_info should be f2fs_update_sit_info,
otherwise build fails while no CONFIG_F2FS_STAT_FS.

Fixes: fc7100ea2a52 ("f2fs: Add f2fs stats to sysfs")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mpt3sas: Fix double free warnings

[ Upstream commit cbbfdb2a2416c9f0cde913cf09670097ac281282 ]

Fix following warning from Smatch static analyser:

drivers/scsi/mpt3sas/mpt3sas_base.c:5256 _base_allocate_memory_pools()
warn: 'ioc->hpr_lookup' double freed

drivers/scsi/mpt3sas/mpt3sas_base.c:5256 _base_allocate_memory_pools()
warn: 'ioc->internal_lookup' double freed

Link: https://lore.kernel.org/r/20200508110738.30732-1-suganath-prabu.subramani@broadcom.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: loopback: Fix READ with data and sensebytes

[ Upstream commit c68a56736c129f5dd1632856956f9c3e04bae200 ]

We use tcm_loop with tape emulations running on tcmu.

In case application reads a short tape block with a longer READ, or a long
tape block with a short READ, according to SCC spec data has to be
tranferred _and_ sensebytes with ILI set and information field containing
the residual count. Similar problem also exists when using fixed block
size in READ.

Up to now tcm_loop is not prepared to handle sensebytes if input data is
provided, as in tcm_loop_queue_data_in() it only sets SAM_STAT_GOOD and, if
necessary, the residual count.

To fix the bug, the same handling for sensebytes as present in
tcm_loop_queue_status() must be done in tcm_loop_queue_data_in() also.

After adding this handling, the two function now are nearly identical, so I
created a single function with two wrappers.

Link: https://lore.kernel.org/r/20200428182617.32726-1-bstroesser@ts.fujitsu.com
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: msm8996: Fix CSI IRQ types

[ Upstream commit 4a4a26317ec8aba575f6b85789a42639937bc1a4 ]

Each IRQ_TYPE_NONE interrupt causes a warning at boot.
Fix that by defining an appropriate type.

Fixes: e0531312e78f ("arm64: dts: qcom: msm8996: Add CAMSS support")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/1587470425-13726-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

remoteproc/mediatek: fix invalid use of sizeof in scp_ipi_init()

[ Upstream commit 8096f80a5c09b716be207eb042c4e40d6cdefbd2 ]

sizeof() when applied to a pointer typed expression gives the
size of the pointer, not that of the pointed data.

Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Fixes: 63c13d61eafe ("remoteproc/mediatek: add SCP support for mt8183")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200509084237.36293-1-weiyongjun1@huawei.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: core: fix error return code in sof_probe_continue()

[ Upstream commit 7d8785bc7adbb4dc5ba8ee06994107637848ded8 ]

Fix to return negative error code -ENOMEM from the IPC init error
handling case instead of 0, as done elsewhere in this function.

Fixes: c16211d6226d ("ASoC: SOF: Add Sound Open Firmware driver core")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200509093337.78897-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: brcmstb: Assert fundamental reset on initialization

[ Upstream commit 22e21e51ce755399fd42055a3f668ee4af370881 ]

While preparing the driver for upstream this detail was missed.

If not asserted during the initialization process, devices connected on
the bus will not be made aware of the internal reset happening. This,
potentially resulting in unexpected behavior.

Link: https://lore.kernel.org/r/20200507172020.18000-1-nsaenzjulienne@suse.de
Fixes: c0452137034b ("PCI: brcmstb: Add Broadcom STB PCIe host controller driver")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: smb347-charger: IRQSTAT_D is volatile

[ Upstream commit c32ea07a30630ace950e07ffe7a18bdcc25898e1 ]

Fix failure when USB cable is connected:
smb347 2-006a: reading IRQSTAT_D failed

Fixes: 1502cfe19bac ("smb347-charger: Fix battery status reporting logic for charger faults")
Tested-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: lp8788: Fix an error handling path in 'lp8788_charger_probe()'

[ Upstream commit 934ed3847a4ebc75b655659c4d2349ba4337941c ]

In the probe function, in case of error, resources allocated in
'lp8788_setup_adc_channel()' must be released.

This can be achieved easily by using the devm_ variant of
'iio_channel_get()'.
This has the extra benefit to simplify the remove function and to axe the
'lp8788_release_adc_channel()' function which is now useless.

Fixes: 98a276649358 ("power_supply: Add new lp8788 charger driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: firewire-lib: fix invalid assignment to union data for directional parameter

[ Upstream commit 8304cf77c92038cd1c50c27b69d30be695cc8003 ]

Although the value of FDF is used just for outgoing stream, the assignment
to union member is done for both directions of stream. At present this
causes no issue because the value of same position is reassigned later for
opposite stream. However, it's better to add if statement.

Fixes: d3d10a4a1b19 ("ALSA: firewire-lib: use union for directional parameters")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200508043635.349339-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Fix warning after FC target reset

[ Upstream commit f839544ccff60cbe534282aac68858fc3fb278ca ]

Currently, FC target reset finishes with the warning message:

[84010.596893] ------------[ cut here ]------------
[84010.596917] WARNING: CPU: 238 PID: 279973 at ../drivers/scsi/qla2xxx/qla_target.c:6644 qlt_enable_vha+0x1d0/0x260 [qla2xxx]
[84010.596918] Modules linked in: vrf af_packet 8021q garp mrp stp llc netlink_diag target_tatlin_tblock(OEX) dm_ec(OEX) ttln_rdma(OEX) dm_frontend(OEX) nvme_rdma nvmet tcm_qla2xxx iscsi_target_mod target_core_mod at24 nvmem_core pnv_php ipmi_watchdog ipmi_ssif vmx_crypto gf128mul crct10dif_vpmsum qla2xxx rpcrdma nvme_fc powernv_flash(X) nvme_fabrics uio_pdrv_genirq mtd rtc_opal(X) ibmpowernv(X) opal_prd(X) uio scsi_transport_fc i2c_opal(X) ses enclosure ipmi_poweroff ast i2c_algo_bit ttm bmc_mcu(OEX) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm drm_panel_orientation_quirks agpgart nfsd auth_rpcgss nfs_acl ipmi_powernv(X) lockd ipmi_devintf ipmi_msghandler grace dummy ext4 crc16 jbd2 mbcache sd_mod rdma_ucm ib_iser rdma_cm ib_umad iw_cm ib_ipoib libiscsi scsi_transport_iscsi ib_cm
[84010.596975]  configfs mlx5_ib ib_uverbs ib_core mlx5_core crc32c_vpmsum xhci_pci xhci_hcd mpt3sas(OEX) tg3 usbcore mlxfw tls raid_class libphy scsi_transport_sas devlink ptp pps_core nvme nvme_core sunrpc dm_mirror dm_region_hash dm_log sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4
[84010.597001] Supported: Yes, External
[84010.597004] CPU: 238 PID: 279973 Comm: bash Tainted: G           OE      4.12.14-197.29-default #1 SLE15-SP1
[84010.597006] task: c000000a104c0000 task.stack: c000000b52188000
[84010.597007] NIP: d00000001ffd7f78 LR: d00000001ffd7f6c CTR: c0000000001676c0
[84010.597008] REGS: c000000b5218b910 TRAP: 0700   Tainted: G           OE       (4.12.14-197.29-default)
[84010.597008] MSR: 900000010282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]>
[84010.597015]   CR: 48242424  XER: 00000000
[84010.597016] CFAR: d00000001ff45d08 SOFTE: 1
               GPR00: d00000001ffd7f6c c000000b5218bb90 d00000002001b228 0000000000000102
               GPR04: 0000000000000001 0000000000000001 00013d91ed0a5e2d 0000000000000000
               GPR08: c000000007793300 0000000000000000 0000000000000000 c000000a086e7818
               GPR12: 0000000000002200 c000000007793300 0000000000000000 000000012bc937c0
               GPR16: 000000012bbf7ed0 0000000000000000 000000012bc3dd10 0000000000000000
               GPR20: 000000012bc4db28 0000010036442810 000000012bc97828 000000012bc96c70
               GPR24: 00000100365b1550 0000000000000000 00000100363f3d80 c000000be20d3080
               GPR28: c000000bda7eae00 c000000be20db7e8 c000000be20d3778 c000000be20db7e8
[84010.597042] NIP [d00000001ffd7f78] qlt_enable_vha+0x1d0/0x260 [qla2xxx]
[84010.597051] LR [d00000001ffd7f6c] qlt_enable_vha+0x1c4/0x260 [qla2xxx]
[84010.597051] Call Trace:
[84010.597061] [c000000b5218bb90] [d00000001ffd7f6c] qlt_enable_vha+0x1c4/0x260 [qla2xxx] (unreliable)
[84010.597064] [c000000b5218bc20] [d000000009820b6c] tcm_qla2xxx_tpg_enable_store+0xc4/0x130 [tcm_qla2xxx]
[84010.597067] [c000000b5218bcb0] [d0000000185d0e68] configfs_write_file+0xd0/0x190 [configfs]
[84010.597072] [c000000b5218bd00] [c0000000003d0edc] __vfs_write+0x3c/0x1e0
[84010.597074] [c000000b5218bd90] [c0000000003d2ea8] vfs_write+0xd8/0x220
[84010.597076] [c000000b5218bde0] [c0000000003d4ddc] SyS_write+0x6c/0x110
[84010.597079] [c000000b5218be30] [c00000000000b188] system_call+0x3c/0x130
[84010.597080] Instruction dump:
[84010.597082] 7d0050a8 7d084b78 7d0051ad 40c2fff4 7fa3eb78 4bf73965 60000000 7fa3eb78
[84010.597086] 4bf6dcd9 60000000 2fa30000 419eff40 <0fe00000> 4bffff38 e95f0058 a12a0180
[84010.597090] ---[ end trace e32abaf6e6fee826 ]---

To reproduce:

echo 0x7fffffff > /sys/module/qla2xxx/parameters/logging
modprobe target_core_mod
modprobe tcm_qla2xxx
mkdir /sys/kernel/config/target/qla2xxx
mkdir /sys/kernel/config/target/qla2xxx/<port-name>
mkdir /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1
echo 1 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable
echo 0 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable
echo 1 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable

SYSTEM START
kernel: pid 327:drivers/scsi/qla2xxx/qla_init.c:2174 qla2x00_initialize_adapter(): vha->flags.online 0x0
<...>
kernel: pid 327:drivers/scsi/qla2xxx/qla_os.c:3444 qla2x00_probe_one(): vha->flags.online 0x1

echo 1 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:86:a6:2a/tpgt_1/enable
kernel: pid 348:drivers/scsi/qla2xxx/qla_init.c:6641 qla2x00_abort_isp_cleanup(): vha->flags.online 0x0, ISP_ABORT_NEEDED 0x0
<...>
kernel: pid 348:drivers/scsi/qla2xxx/qla_init.c:6998 qla2x00_restart_isp(): vha->flags.online 0x0

echo 0 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:86:a6:2a/tpgt_1/enable
kernel: pid 348:drivers/scsi/qla2xxx/qla_init.c:6641 qla2x00_abort_isp_cleanup(): vha->flags.online 0x0, ISP_ABORT_NEEDED 0x0
<...>
kernel: pid 1404:drivers/scsi/qla2xxx/qla_os.c:1107 qla2x00_wait_for_hba_online(): base_vha->flags.online 0x0

echo 1 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:86:a6:2a/tpgt_1/enable
kernel: pid 1404:drivers/scsi/qla2xxx/qla_os.c:1107 qla2x00_wait_for_hba_online(): base_vha->flags.online 0x0
kernel: -----------[ cut here ]-----------
kernel: WARNING: CPU: 1 PID: 1404 at drivers/scsi/qla2xxx/qla_target.c:6654 qlt_enable_vha+0x1e0/0x280 [qla2xxx]

The issue happens because no real ISP reset is executed.  The
qla2x00_abort_isp(scsi_qla_host_t *vha) function expects that
vha->flags.online will be not zero for ISP reset procedure.  This patch
sets vha->flags.online to 1 before calling ->abort_isp() for starting the
ISP reset.

Link: https://lore.kernel.org/r/1d7b21bf9f7676643239eb3d60eaca7cfa505cf0.camel@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Viacheslav Dubeyko <v.dubeiko@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI/ASPM: Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges

[ Upstream commit 66ff14e59e8a30690755b08bc3042359703fb07a ]

7d715a6c1ae5 ("PCI: add PCI Express ASPM support") added the ability for
Linux to enable ASPM, but for some undocumented reason, it didn't enable
ASPM on links where the downstream component is a PCIe-to-PCI/PCI-X Bridge.

Remove this exclusion so we can enable ASPM on these links.

The Dell OptiPlex 7080 mentioned in the bugzilla has a TI XIO2001
PCIe-to-PCI Bridge.  Enabling ASPM on the link leading to it allows the
Intel SoC to enter deeper Package C-states, which is a significant power
savings.

[bhelgaas: commit log]
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207571
Link: https://lore.kernel.org/r/20200505173423.26968-1-kai.heng.feng@canonical.com
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: rcar: Fix incorrect programming of OB windows

[ Upstream commit 2b9f217433e31d125fb697ca7974d3de3ecc3e92 ]

The outbound windows (PCIEPAUR(x), PCIEPALR(x)) describe a mapping between
a CPU address (which is determined by the window number 'x') and a
programmed PCI address - Thus allowing the controller to translate CPU
accesses into PCI accesses.

However the existing code incorrectly writes the CPU address - lets fix
this by writing the PCI address instead.

For memory transactions, existing DT users describe a 1:1 identity mapping
and thus this change should have no effect. However the same isn't true for
I/O.

Link: https://lore.kernel.org/r/20191004132941.6660-1-andrew.murray@arm.com
Fixes: c25da4778803 ("PCI: rcar: Add Renesas R-Car PCIe driver")
Tested-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: base: Fix NULL pointer exception in __platform_driver_probe() if a driver developer is foolish

[ Upstream commit 388bcc6ecc609fca1b4920de7dc3806c98ec535e ]

If platform bus driver registration is failed then, accessing
platform bus spin lock (&drv->driver.bus->p->klist_drivers.k_lock)
in __platform_driver_probe() without verifying the return value
__platform_driver_register() can lead to NULL pointer exception.

So check the return value before attempting the spin lock.

One such example is below:

For a custom usecase, I have intentionally failed the platform bus
registration and I expected all the platform device/driver
registrations to fail gracefully. But I came across this panic
issue.

[    1.331067] BUG: kernel NULL pointer dereference, address: 00000000000000c8
[    1.331118] #PF: supervisor write access in kernel mode
[    1.331163] #PF: error_code(0x0002) - not-present page
[    1.331208] PGD 0 P4D 0
[    1.331233] Oops: 0002 [#1] PREEMPT SMP
[    1.331268] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G        W         5.6.0-00049-g670d35fb0144 #165
[    1.331341] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
[    1.331406] RIP: 0010:_raw_spin_lock+0x15/0x30
[    1.331588] RSP: 0000:ffffc9000001be70 EFLAGS: 00010246
[    1.331632] RAX: 0000000000000000 RBX: 00000000000000c8 RCX: 0000000000000001
[    1.331696] RDX: 0000000000000001 RSI: 0000000000000092 RDI: 0000000000000000
[    1.331754] RBP: 00000000ffffffed R08: 0000000000000501 R09: 0000000000000001
[    1.331817] R10: ffff88817abcc520 R11: 0000000000000670 R12: 00000000ffffffed
[    1.331881] R13: ffffffff82dbc268 R14: ffffffff832f070a R15: 0000000000000000
[    1.331945] FS:  0000000000000000(0000) GS:ffff88817bd80000(0000) knlGS:0000000000000000
[    1.332008] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    1.332062] CR2: 00000000000000c8 CR3: 000000000681e001 CR4: 00000000003606e0
[    1.332126] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    1.332189] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    1.332252] Call Trace:
[    1.332281]  __platform_driver_probe+0x92/0xee
[    1.332323]  ? rtc_dev_init+0x2b/0x2b
[    1.332358]  cmos_init+0x37/0x67
[    1.332396]  do_one_initcall+0x7d/0x168
[    1.332428]  kernel_init_freeable+0x16c/0x1c9
[    1.332473]  ? rest_init+0xc0/0xc0
[    1.332508]  kernel_init+0x5/0x100
[    1.332543]  ret_from_fork+0x1f/0x30
[    1.332579] CR2: 00000000000000c8
[    1.332616] ---[ end trace 3bd87f12e9010b87 ]---
[    1.333549] note: swapper/0[1] exited with preempt_count 1
[    1.333592] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
[    1.333736] Kernel Offset: disabled

Note, this can only be triggered if a driver errors out from this call,
which should never happen.  If it does, the driver needs to be fixed.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20200408214003.3356-1-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: pxa: fix i2c_pxa_scream_blue_murder() debug output

[ Upstream commit 88b73ee7ca4c90baf136ed5a8377fc5a9b73ac08 ]

The IRQ log output is supposed to appear on a single line.  However,
commit 3a2dc1677b60 ("i2c: pxa: Update debug function to dump more info
on error") resulted in it being printed one-entry-per-line, which is
excessively long.

Fixing this is not a trivial matter; using pr_cont() doesn't work as
the previous dev_dbg() may not have been compiled in, or may be
dynamic.

Since the rest of this function output is at error level, and is also
debug output, promote this to error level as well to avoid this
problem.

Reduce the number of always zero prefix digits to save screen real-
estate.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: v3-semi: Fix a memory leak in v3_pci_probe() error handling paths

[ Upstream commit bca718988b9008d0d5f504e2d318178fc84958c1 ]

If we fails somewhere in 'v3_pci_probe()', we need to free 'host'.

Use the managed version of 'pci_alloc_host_bridge()' to do that easily.
The use of managed resources is already widely used in this driver.

Link: https://lore.kernel.org/r/20200418081637.1585-1-christophe.jaillet@wanadoo.fr
Fixes: 68a15eb7bd0c ("PCI: v3-semi: Add V3 Semiconductor PCI host driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[lorenzo.pieralisi@arm.com: commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: wfx: avoid compiler warning on empty array

[ Upstream commit 2eeefd3787fdc6319124945d453774be95b97897 ]

When CONFIG_OF is disabled, gcc-9 produces a warning about the
wfx_sdio_of_match[] array having a declaration without a dimension:

drivers/staging/wfx/bus_sdio.c:159:34: error: array 'wfx_sdio_of_match' assumed to have one element [-Werror]
  159 | static const struct of_device_id wfx_sdio_of_match[];
      |                                  ^~~~~~~~~~~~~~~~~

Move the proper declaration up and out of the #ifdef instead.

Fixes: a7a91ca5a23d ("staging: wfx: add infrastructure for new driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jerome Pouiller <Jerome.Pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200429142119.1735196-1-arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: sm750fb: add missing case while setting FB_VISUAL

[ Upstream commit fa90133377f4a7f15a937df6ad55133bb57c5665 ]

Switch statement does not contain all cases: 8, 16, 24, 32.
This patch will add missing one (24)

Fixes: 81dee67e215b ("staging: sm750fb: add sm750 to staging")
Signed-off-by: Matej Dujava <mdujava@kocurkovo.cz>
Link: https://lore.kernel.org/r/1588277366-19354-2-git-send-email-mdujava@kocurkovo.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: wilc1000: Increase the size of wid_list array

[ Upstream commit a4338ed2e1cf724563956ec5f91deeaabfedbe23 ]

Increase by one the size of wid_list array as index variable can reach a
value of 5. If this happens, an out-of-bounds access is performed.

Also, use a #define instead of a hard-coded literal for the new array
size.

Addresses-Coverity-ID: 1451981 ("Out-of-bounds access")
Fixes: f5a3cb90b802d ("staging: wilc1000: add passive scan support")
Acked-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Oscar Carter <oscar.carter@gmx.com>
Link: https://lore.kernel.org/r/20200504150911.4470-1-oscar.carter@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: gadget: Properly handle failed kick_transfer

[ Upstream commit 8d99087c2db863c5fa3a4a1f3cb82b3a493705ca ]

If dwc3 fails to issue START_TRANSFER/UPDATE_TRANSFER command, then we
should properly end an active transfer and give back all the started
requests. However if it's for an isoc endpoint, the failure maybe due to
bus-expiry status. In this case, don't give back the requests and wait
for the next retry.

Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: meson-g12a: check return of dwc3_meson_g12a_usb_init

[ Upstream commit 8f5bc1ec770c2bdc8c604ba4119a77d81d8f3529 ]

The dwc3_meson_g12a_usb_init function can return an error, check it.

Fixes: c99993376f72ca ("usb: dwc3: Add Amlogic G12A DWC3 glue")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: gadget: Properly handle ClearFeature(halt)

[ Upstream commit cb11ea56f37a36288cdd0a4799a983ee3aa437dd ]

DWC3 must not issue CLEAR_STALL command to control endpoints. The
controller automatically clears the STALL when it receives the SETUP
token. Also, when the driver receives ClearFeature(halt_ep), DWC3 must
stop any active transfer from the endpoint and give back all the
requests to the function drivers.

Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: intel-ish-hid: avoid bogus uninitialized-variable warning

[ Upstream commit 0b66fb3e6b7a53688f8e20945ac78cd3d832c65f ]

Older compilers like gcc-4.8 don't see that the variable is
initialized when it is used:

In file included from include/linux/compiler_types.h:68:0,
                 from <command-line>:0:
drivers/hid/intel-ish-hid/ishtp-fw-loader.c: In function 'load_fw_from_host':
include/linux/compiler-gcc.h:75:45: warning: 'fw_info.ldr_capability.max_dma_buf_size' may be used uninitialized in this function [-Wmaybe-uninitialized]
 #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
                                             ^
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:770:22: note: 'fw_info.ldr_capability.max_dma_buf_size' was declared here
  struct shim_fw_info fw_info;
                      ^

Make sure to initialize it before returning an error from ish_query_loader_prop().

Fixes: 91b228107da3 ("HID: intel-ish-hid: ISH firmware loader client driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>