Takashi Iwai [Thu, 28 Nov 2024 13:55:21 +0000 (14:55 +0100)]
Merge tag 'asoc-fix-v6.13-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.13
A pile of driver specific quirks and fixes that came in since the merge
window. One of the AMD fixes is a bit broken for some systems, I'm
expecting an incremental change to fix that but it seems better overall
to merge the rest of the fixes.
There's also one small documentation update that seemed sensible to
apply now, pointing to the dapm-graph tool.
Jaroslav Kysela [Thu, 28 Nov 2024 11:21:45 +0000 (12:21 +0100)]
ALSA: hda: improve bass speaker support for ASUS Zenbook UM5606WA
This hardware has ALC294 codec with speaker NID 0x17 and bass speaker
NID 0x15.
This patch removes DAC NID 0x06 (without volume control) from
the connection list for bass speaker NID 0x15. Both speaker PINs
are routed to DAC NID 0x03 with this change.
Bard Liao [Wed, 27 Nov 2024 09:29:54 +0000 (17:29 +0800)]
ASoC: SOF: ipc3-topology: Convert the topology pin index to ALH dai index
Intel SoundWire machine driver always uses Pin number 2 and above.
Currently, the pin number is used as the FW DAI index directly. As a
result, FW DAI 0 and 1 are never used. That worked fine because we use
up to 2 DAIs in a SDW link. Convert the topology pin index to ALH dai
index, the mapping is using 2-off indexing, iow, pin #2 is ALH dai #0.
The issue exists since beginning. And the Fixes tag is the first commit
that this commit can be applied.
Fixes: b66bfc3a9810 ("ASoC: SOF: sof-audio: Fix broken early bclk feature for SSP") Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://patch.msgid.link/20241127092955.20026-1-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Nícolas F. R. A. Prado [Tue, 26 Nov 2024 20:09:43 +0000 (15:09 -0500)]
ASoC: mediatek: Check num_codecs is not zero to avoid panic during probe
Following commit 13f58267cda3 ("ASoC: soc.h: don't create dummy
Component via COMP_DUMMY()"), COMP_DUMMY() became an array with zero
length, and only gets populated with the dummy struct after the card is
registered. Since the sound card driver's probe happens before the card
registration, accessing any of the members of a dummy component during
probe will result in undefined behavior.
This can be observed in the mt8188 and mt8195 machine sound drivers. By
omitting a dai link subnode in the sound card's node in the Devicetree,
the default uninitialized dummy codec is used, and when its dai_name
pointer gets passed to strcmp() it results in a null pointer dereference
and a kernel panic.
In addition to that, set_card_codec_info() in the generic helpers file,
mtk-soundcard-driver.c, will populate a dai link with a dummy codec when
a dai link node is present in DT but with no codec property.
The result is that at probe time, a dummy codec can either be
uninitialized with num_codecs = 0, or be an initialized dummy codec,
with num_codecs = 1 and dai_name = "snd-soc-dummy-dai". In order to
accommodate for both situations, check that num_codecs is not zero
before accessing the codecs' fields but still check for the codec's dai
name against "snd-soc-dummy-dai" as needed.
While at it, also drop the check that dai_name is not null in the mt8192
driver, introduced in commit 4d4e1b6319e5 ("ASoC: mediatek: mt8192:
Check existence of dai_name before dereferencing"), as it is actually
redundant given the preceding num_codecs != 0 check.
Fixes: 13f58267cda3 ("ASoC: soc.h: don't create dummy Component via COMP_DUMMY()") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Fei Shao <fshao@chromium.org> Acked-by: Trevor Wu <trevor.wu@mediatek.com> Link: https://patch.msgid.link/20241126-asoc-mtk-dummy-panic-v1-1-42d53e168d2e@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Wed, 27 Nov 2024 07:00:58 +0000 (08:00 +0100)]
ALSA: ump: Fix evaluation of MIDI 1.0 FB info
The m1.0 field of UMP Function Block info specifies whether the given
FB is a MIDI 1.0 port or not. When implementing the UMP support on
Linux, I somehow interpreted as if it were bit flags, but the field is
actually an enumeration from 0 to 2, where 2 means MIDI 1.0 *and* low
speed.
This patch corrects the interpretation and sets the right bit flags
depending on the m1.0 field of FB Info. This effectively fixes the
missing detection of MIDI 1.0 FB when m1.0 is 2.
Zichen Xie [Tue, 26 Nov 2024 19:24:49 +0000 (13:24 -0600)]
ALSA: core: Fix possible NULL dereference caused by kunit_kzalloc()
kunit_kzalloc() may return a NULL pointer, dereferencing it without
NULL check may lead to NULL dereference.
Add NULL checks for all the kunit_kzalloc() in sound_kunit.c
Takashi Iwai [Tue, 26 Nov 2024 14:10:10 +0000 (15:10 +0100)]
ALSA: hda: Show the codec quirk info at probing
Lots of HD-audio devices need the device-specific quirk, and it's
often helpful to know which quirk is applied. But currently the
driver shows it only as a debug output, hence we'd have to enable the
debug option at each time we want to see it (and the output becomes
too messy due to other debug messages).
This patch changes the messages to the info level, so that they appear
at probing normally.
Baojun Xu [Sat, 23 Nov 2024 07:37:18 +0000 (15:37 +0800)]
ALSA: hda/tas2781: Add speaker id check for ASUS projects
Add speaker id check by gpio in ACPI for ASUS projects.
In other vendors, speaker id was checked by BIOS, and was applied in
last bit of subsys id, so we can load corresponding firmware binary file
for its speaker by subsys id.
But in ASUS project, the firmware binary name will be appended an extra
number to tell the speakers from different vendors. And this single digit
come from gpio level of speaker id in BIOS.
Takashi Iwai [Mon, 25 Nov 2024 14:46:16 +0000 (15:46 +0100)]
ALSA: usb-audio: Fix out of bounds reads when finding clock sources
The current USB-audio driver code doesn't check bLength of each
descriptor at traversing for clock descriptors. That is, when a
device provides a bogus descriptor with a shorter bLength, the driver
might hit out-of-bounds reads.
For addressing it, this patch adds sanity checks to the validator
functions for the clock descriptor traversal. When the descriptor
length is shorter than expected, it's skipped in the loop.
For the clock source and clock multiplier descriptors, we can just
check bLength against the sizeof() of each descriptor type.
OTOH, the clock selector descriptor of UAC2 and UAC3 has an array
of bNrInPins elements and two more fields at its tail, hence those
have to be checked in addition to the sizeof() check.
Takashi Iwai [Mon, 25 Nov 2024 14:20:25 +0000 (15:20 +0100)]
ALSA: rawmidi: Fix kvfree() call in spinlock
At the conversion of locking with guard(), I overlooked that kvfree()
must not be called inside the spinlock unlike kfree(), and this was
caught by syzkaller now.
This patch reverts the conversion partially for restoring the kvfree()
call outside the spinlock. It's not trivial to use guard() in this
context, unfortunately.
Fixes: 84bb065b316e ("ALSA: rawmidi: Use guard() for locking") Reported-by: syzbot+351f8764833934c68836@syzkaller.appspotmail.com Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Closes: https://lore.kernel.org/6744737b.050a0220.1cc393.007e.GAE@google.com Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20241125142041.16578-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dinesh Kumar [Mon, 25 Nov 2024 09:28:42 +0000 (14:58 +0530)]
ALSA: hda/realtek: Fix Internal Speaker and Mic boost of Infinix Y4 Max
Internal Speaker of Infinix Y4 Max remains muted due to incorrect
Pin configuration, and the Internal Mic records high noise. This patch
corrects the Pin configuration for the Internal Speaker and limits
the Internal Mic boost.
HW Probe for device: https://linux-hardware.org/?probe=6d4386c347
Test: Internal Speaker works fine, Mic has low noise.
anish kumar [Thu, 21 Nov 2024 23:29:58 +0000 (15:29 -0800)]
ASoC: doc: dapm: Add location information for dapm-graph tool
To help developers debug DAPM issues and visualize widget connectivity,
the dapm-graph tool provides a graphical representation of how widgets
and routes are connected. This commit adds the location information for
the tool to the documentation, making it easier for users to find and
use it for troubleshooting DAPM-related problems.
Charles Han [Mon, 18 Nov 2024 08:45:53 +0000 (16:45 +0800)]
ASoC: imx-audmix: Add NULL check in imx_audmix_probe
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in imx_audmix_probe() is not checked.
Add NULL check in imx_audmix_probe(), to handle kernel NULL
pointer dereference error.
Takashi Iwai [Wed, 20 Nov 2024 14:11:02 +0000 (15:11 +0100)]
ALSA: pcm: Add sanity NULL check for the default mmap fault handler
A driver might allow the mmap access before initializing its
runtime->dma_area properly. Add a proper NULL check before passing to
virt_to_page() for avoiding a panic.
Pei Xiao [Wed, 20 Nov 2024 06:30:19 +0000 (14:30 +0800)]
ALSA: ac97: bus: Fix the mistake in the comment
Fix mistake in the comment.
sound/ac97/bus.c:192: warning: Function parameter or member 'drv' not described in 'snd_ac97_codec_driver_register'
sound/ac97/bus.c:192: warning: Excess function parameter 'dev' description in 'snd_ac97_codec_driver_register'
sound/ac97/bus.c:205: warning: Function parameter or member 'drv' not described in 'snd_ac97_codec_driver_unregister'
sound/ac97/bus.c:205: warning: Excess function parameter 'dev' description in 'snd_ac97_codec_driver_unregister'
sound/ac97/bus.c:351: warning: Function parameter or member 'codecs_pdata' not described in 'snd_ac97_controller_register'
Huacai Chen [Fri, 15 Nov 2024 15:06:53 +0000 (23:06 +0800)]
ALSA: hda: Poll jack events for LS7A HD-Audio
LS7A HD-Audio disable interrupts and use polling mode due to hardware
drawbacks. As a result, unsolicited jack events are also unusable. If
we want to support headphone hotplug, we need to also poll jack events.
Here we use 1500ms as the poll interval if no module parameter specify
it.
Takashi Iwai [Mon, 18 Nov 2024 13:34:54 +0000 (14:34 +0100)]
Merge tag 'asoc-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.13
This release was mainly about new drivers, there's a very large batch of
new drivers and devices including quite a few from newer vendors which
is great to see. Other than the new drivers and the usual routine fixes
and enhancements the bulk of the work has been Morimoto-san's continuing
work on simplifiying APIs, plus a few other bits:
- More API simplifications from Morimoto-san.
- Renaming of the sh directory to Renesas to reflect the focus on other
architectures.
- Factoring out of some of the common code for Realtek devices.
- Support for Allwinner H616, AMD ACP 6.3 systems, AWInic AW88081,
Cirrus Logic CS32L84, Everest ES8328, Iron Devices SMA1307, Longsoon
I2S, NeoFidelity NTP8918 and NTP8835, Philips UDA1342, Qualcomm
SM8750, RealTek RT721, and ST Microelectronics STM32MP25.
Jonas Karlman [Fri, 15 Nov 2024 04:43:44 +0000 (04:43 +0000)]
ASoC: hdmi-codec: reorder channel allocation list
The ordering in hdmi_codec_get_ch_alloc_table_idx() results in
wrong channel allocation for a number of cases, e.g. when ELD
reports FL|FR|LFE|FC|RL|RR or FL|FR|LFE|FC|RL|RR|RC|RLC|RRC:
ca_id 0x01 with speaker mask FL|FR|LFE is selected instead of
ca_id 0x03 with speaker mask FL|FR|LFE|FC for 4 channels
and
ca_id 0x04 with speaker mask FL|FR|RC gets selected instead of
ca_id 0x0b with speaker mask FL|FR|LFE|FC|RL|RR for 6 channels
Fix this by reordering the channel allocation list with most
specific speaker masks at the top.
Takashi Iwai [Thu, 14 Nov 2024 15:40:15 +0000 (16:40 +0100)]
Merge tag 'asoc-fix-v6.12-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.12
Some last updates for v6.12, one quirk plus a couple of fixes. One is a
minor fix for a relatively obscure driver and the other is a relatively
important fix for boot hangs with some audio graph based cards.
Mark Brown [Thu, 14 Nov 2024 15:36:46 +0000 (15:36 +0000)]
ASoc: simple-mux: Allow to specify an idle-state
Merge series from "Hendrik v. Raven" <h.v.raven@merzmedtech.de>:
This series adds support for the idle-state property from the mux
framework to the simple-mux audio variant. It allows to specify the state
of the mux when it is not in use.
Mark Brown [Thu, 14 Nov 2024 15:36:39 +0000 (15:36 +0000)]
Add generic AMD Soundwire machine driver for Legacy(No
Merge series from Vijendar Mukunda <Vijendar.Mukunda@amd.com>:
This patch series add SoundWire machines for RT711, RT714, RT1316 and
RT722 codecs for ACP 6.3 platform. Also, it adds a generic SoundWire
machine driver code for legacy(No DSP) stack.
Arnd Bergmann [Wed, 13 Nov 2024 17:57:13 +0000 (18:57 +0100)]
ASoC: sma1307: fix uninitialized variable refence
When firmware loading is disabled, gcc warns that the local
'fw' variable fails to get initialized:
sound/soc/codecs/sma1307.c: In function 'sma1307_setting_loaded.isra':
sound/soc/codecs/sma1307.c:1717:12: error: 'fw' is used uninitialized [-Werror=uninitialized]
1717 | if (!fw) {
| ^
sound/soc/codecs/sma1307.c:1712:32: note: 'fw' was declared here
1712 | const struct firmware *fw;
Check the return code from request_firmware() to ensure that the
firmware is correctly set, and drop the incorrect release_firmware()
on that uninitialized data.
simple-mux immediately activates the new output, even when it is powered
down. This can be undesirable in some cases, for example when a
mechanical relais is used.
Adds "idle-state" property from the mux controller to select the output
state to be used when the mux is powered down.
Hendrik v. Raven [Thu, 14 Nov 2024 11:01:25 +0000 (12:01 +0100)]
ASoc: simple-mux: add idle-state support
So far the mux changes it state immediately, even when not in use. Allow
overriding this behaviour by specifying an optional idle-state. This
state is used whenever the mux is powered down, only switching to the
selected state on power up. If unspecified it defaults to as-is,
maintaining the previous behaviour.
Bard Liao [Wed, 13 Nov 2024 06:41:33 +0000 (14:41 +0800)]
ASoC: sdca: test adev before calling acpi_dev_for_each_child
sdca_lookup_functions may be called by a Peripheral that is not listed
in the ACPI table. Testing adev is required to avoid kernel NULL pointer
dereference.
Fixes: 3a513da1ae33 ("ASoC: SDCA: add initial module") Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://patch.msgid.link/20241113064133.162501-1-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Colin Ian King [Wed, 13 Nov 2024 13:08:07 +0000 (13:08 +0000)]
ASoC: SOF: ipc4-topology: remove redundant assignment to variable ret
The variable ret is being assigned a zero value however the value is
never read because ret is being re-assigned later after the end of
the switch statement. The assignment is redundant and can be removed.
Vijendar Mukunda [Wed, 13 Nov 2024 11:52:21 +0000 (17:22 +0530)]
ASoC: amd: acp: move get_acp63_cpu_pin_id() to common file
get_acp63_cpu_pin_id() is the common SoundWire machine driver
helper function will be used for AMD Legacy(No DSP) generic
SoundWire machine driver as well.
Move get_acp63_cpu_pin_id() function to common place holder.
Vijendar Mukunda [Wed, 13 Nov 2024 11:52:19 +0000 (17:22 +0530)]
ASoC: amd: acp: add RT711, RT714 & RT1316 support for acp 6.3 platform
This patch add supports for corresponding codecs on acp6.3 platform
hardware configuration.
SDW0: RT711 Jack
SDW0: RT1316 Left Speaker
SDW0: RT1316 Right Speaker
SDW1: RT714 DMIC
Takashi Iwai [Wed, 13 Nov 2024 11:10:39 +0000 (12:10 +0100)]
ALSA: 6fire: Release resources at card release
The current 6fire code tries to release the resources right after the
call of usb6fire_chip_abort(). But at this moment, the card object
might be still in use (as we're calling snd_card_free_when_closed()).
For avoid potential UAFs, move the release of resources to the card's
private_free instead of the manual call of usb6fire_chip_destroy() at
the USB disconnect callback.
Takashi Iwai [Wed, 13 Nov 2024 11:10:38 +0000 (12:10 +0100)]
ALSA: caiaq: Use snd_card_free_when_closed() at disconnection
The USB disconnect callback is supposed to be short and not too-long
waiting. OTOH, the current code uses snd_card_free() at
disconnection, but this waits for the close of all used fds, hence it
can take long. It eventually blocks the upper layer USB ioctls, which
may trigger a soft lockup.
An easy workaround is to replace snd_card_free() with
snd_card_free_when_closed(). This variant returns immediately while
the release of resources is done asynchronously by the card device
release at the last close.
This patch also splits the code to the disconnect and the free phases;
the former is called immediately at the USB disconnect callback while
the latter is called from the card destructor.
Takashi Iwai [Wed, 13 Nov 2024 11:10:37 +0000 (12:10 +0100)]
ALSA: us122l: Drop mmap_count field
us122l.mmap_count field was used for counting the hwdep mmap opens and
syncing at disconnection. But such a manual sync isn't needed, as the
refcount check is done in the ALSA core side. So let's drop it.
Takashi Iwai [Wed, 13 Nov 2024 11:10:36 +0000 (12:10 +0100)]
ALSA: us122l: Use snd_card_free_when_closed() at disconnection
The USB disconnect callback is supposed to be short and not too-long
waiting. OTOH, the current code uses snd_card_free() at
disconnection, but this waits for the close of all used fds, hence it
can take long. It eventually blocks the upper layer USB ioctls, which
may trigger a soft lockup.
An easy workaround is to replace snd_card_free() with
snd_card_free_when_closed(). This variant returns immediately while
the release of resources is done asynchronously by the card device
release at the last close.
The loop of us122l->mmap_count check is dropped as well. The check is
useless for the asynchronous operation with *_when_closed().
Takashi Iwai [Wed, 13 Nov 2024 11:10:35 +0000 (12:10 +0100)]
ALSA: usx2y: Use snd_card_free_when_closed() at disconnection
The USB disconnect callback is supposed to be short and not too-long
waiting. OTOH, the current code uses snd_card_free() at
disconnection, but this waits for the close of all used fds, hence it
can take long. It eventually blocks the upper layer USB ioctls, which
may trigger a soft lockup.
An easy workaround is to replace snd_card_free() with
snd_card_free_when_closed(). This variant returns immediately while
the release of resources is done asynchronously by the card device
release at the last close.
Fixes: 230cd5e24853 ("[ALSA] prevent oops & dead keyboard on usb unplugging while the device is be ing used") Reported-by: syzbot+73582d08864d8268b6fd@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=73582d08864d8268b6fd Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20241113111042.15058-2-tiwai@suse.de
snd_pcm_mmap_data_open() and _close() are defined as inline functions
in the public sound/pcm.h, but those are used only locally in
pcm_native.c, hence they should be better placed there.
Also, those are referred as callbacks, the useless inline is dropped.
Kailang Yang [Tue, 12 Nov 2024 06:03:53 +0000 (14:03 +0800)]
ALSA: hda/realtek - update set GPIO3 to default for Thinkpad with ALC1318
If user no update BIOS, the speaker will no sound.
This patch support old BIOS to have sound from speaker.
Fixes: 1e707769df07 ("ALSA: hda/realtek - Set GPIO3 to default at S4 state for Thinkpad with ALC1318") Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Mark Brown [Tue, 12 Nov 2024 13:09:50 +0000 (13:09 +0000)]
ASoC: max9768: Fix event generation for playback mute
The max9768 has a custom control for playback mute which unconditionally
returns 0 from the put() operation, rather than returning 1 on change to
ensure notifications are generated to userspace. Check to see if the value
has changed and return appropriately.
Kuninori Morimoto [Tue, 12 Nov 2024 02:39:44 +0000 (02:39 +0000)]
ASoC: simple-card-utils: care simple_util_dai for dummy DAI
Simple Card Utils has simple_util_dai which is paired to snd_soc_dai,
and assmus that CPU/Codec DAI and its paired simple_util_dai are same
order for CPU/Codec
(X) for_each_prop_dai_cpu(.., i, ...) {
(Y) dai = snd_soc_rtd_to_cpu(.., i);
...
}
But current Simple Card Utils didn't have simple_util_dai for
dummy DAI. So above (A) will get NULL pointer in such case.
This patch cares simple_util_dai for dummy DAI.
John Watts [Tue, 12 Nov 2024 10:34:00 +0000 (21:34 +1100)]
ASoC: test-component: Support continuous rates for test component
There's no reason to limit the supported rates of the test component
to specific ones as if it's a real piece of hardware. Set the rates to
continuous to aid in testing different rates.
Suraj Sonawane [Thu, 7 Nov 2024 06:36:09 +0000 (12:06 +0530)]
ASoc: SOF: ipc4-pcm: fix uninit-value in sof_ipc4_pcm_dai_link_fixup_rate
Fix an issue detected by the Smatch tool:
sound/soc/sof/ipc4-pcm.c: sof_ipc4_pcm_dai_link_fixup_rate()
error: uninitialized symbol 'be_rate'.
The warning highlights a case where `be_rate` could remain uninitialized
if `num_input_formats` is zero, which would cause undefined behavior
when setting `rate->min` and `rate->max` based on `be_rate`.
To address this issue, a `WARN_ON_ONCE(!num_input_formats)` check was
added to ensure `num_input_formats` is greater than zero. If this
condition fails, the function returns `-EINVAL`, preventing the use of
an uninitialized `be_rate`.
This change improves the robustness of the function by catching an
invalid state early and providing better feedback during development.
Olivier Moysan [Tue, 5 Nov 2024 13:59:41 +0000 (14:59 +0100)]
ASoC: dt-bindings: stm32: add missing port property
Add missing port property in STM32 SPDIFRX binding.
This will prevent potential warning:
Unevaluated properties are not allowed ('port' was unexpected)
Marek Vasut [Fri, 8 Nov 2024 23:53:47 +0000 (00:53 +0100)]
ASoC: max98088: Remove duplicate DACs
This codec only has one set of left and right DACs, remove the duplicate
DACs with duplicated bits controlling them as the userspace can set those
controls to mismatched value. This most likely does break userspace ABI,
but there seem to be no in-kernel users.
John Watts [Fri, 8 Nov 2024 01:37:15 +0000 (12:37 +1100)]
ASoC: audio-graph-card2: Purge absent supplies for device tree nodes
The audio graph card doesn't mark its subnodes such as multi {}, dpcm {}
and c2c {} as not requiring any suppliers. This causes a hang as Linux
waits for these phantom suppliers to show up on boot.
Make it clear these nodes have no suppliers.
Linus Torvalds [Sun, 10 Nov 2024 22:16:28 +0000 (14:16 -0800)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A handful of Qualcomm clk driver fixes:
- Correct flags for X Elite USB MP GDSC and pcie pipediv2 clocks
- Fix alpha PLL post_div mask for the cases where width is not
specified
- Avoid hangs in the SM8350 video driver (venus) by setting HW_CTRL
trigger feature on the video clocks"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: gcc-x1e80100: Fix USB MP SS1 PHY GDSC pwrsts flags
clk: qcom: gcc-x1e80100: Fix halt_check for pipediv2 clocks
clk: qcom: clk-alpha-pll: Fix pll post div mask when width is not set
clk: qcom: videocc-sm8350: use HW_CTRL_TRIGGER for vcodec GDSCs
Linus Torvalds [Sun, 10 Nov 2024 22:13:05 +0000 (14:13 -0800)]
Merge tag 'i2c-for-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"i2c-host fixes for v6.12-rc7 (from Andi):
- Fix designware incorrect behavior when concluding a transmission
- Fix Mule multiplexer error value evaluation"
* tag 'i2c-for-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: designware: do not hold SCL low when I2C_DYNAMIC_TAR_UPDATE is not set
i2c: muxes: Fix return value check in mule_i2c_mux_probe()
If the caller supplies an iocb->ki_pos value that is close to the
filesystem upper limit, and an iterator with a count that causes us to
overflow that limit, then filemap_read() enters an infinite loop.
This behaviour was discovered when testing xfstests generic/525 with the
"localio" optimisation for loopback NFS mounts.
Reported-by: Mike Snitzer <snitzer@kernel.org> Fixes: c2a9737f45e2 ("vfs,mm: fix a dead loop in truncate_inode_pages_range()") Tested-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 10 Nov 2024 17:37:47 +0000 (09:37 -0800)]
Merge tag 'irq_urgent_for_v6.12_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Borislav Petkov:
- Make sure GICv3 controller interrupt activation doesn't race with a
concurrent deactivation due to propagation delays of the register
write
* tag 'irq_urgent_for_v6.12_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3: Force propagation of the active state with a read-back
Linus Torvalds [Sun, 10 Nov 2024 17:04:27 +0000 (09:04 -0800)]
Merge tag 'mm-hotfixes-stable-2024-11-09-22-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes, 14 of which are cc:stable.
Three affect DAMON. Lorenzo's five-patch series to address the
mmap_region error handling is here also.
Apart from that, various singletons"
* tag 'mm-hotfixes-stable-2024-11-09-22-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add entry for Thorsten Blum
ocfs2: remove entry once instead of null-ptr-dereference in ocfs2_xa_remove()
signal: restore the override_rlimit logic
fs/proc: fix compile warning about variable 'vmcore_mmap_ops'
ucounts: fix counter leak in inc_rlimit_get_ucounts()
selftests: hugetlb_dio: check for initial conditions to skip in the start
mm: fix docs for the kernel parameter ``thp_anon=``
mm/damon/core: avoid overflow in damon_feed_loop_next_input()
mm/damon/core: handle zero schemes apply interval
mm/damon/core: handle zero {aggregation,ops_update} intervals
mm/mlock: set the correct prev on failure
objpool: fix to make percpu slot allocation more robust
mm/page_alloc: keep track of free highatomic
mm: resolve faulty mmap_region() error path behaviour
mm: refactor arch_calc_vm_flag_bits() and arm64 MTE handling
mm: refactor map_deny_write_exec()
mm: unconditionally close VMAs on error
mm: avoid unsafe VMA hook invocation when error arises on mmap hook
mm/thp: fix deferred split unqueue naming and locking
mm/thp: fix deferred split queue not partially_mapped
Linus Torvalds [Sun, 10 Nov 2024 16:56:48 +0000 (08:56 -0800)]
Merge tag 'usb-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt fixes from Greg KH:
"Here are some small remaining USB and Thunderbolt fixes and device ids
for 6.12-rc7. Included in here are:
- new USB serial driver device ids
- thunderbolt driver fixes for reported problems
- typec bugfixes
- dwc3 driver fix
- musb driver fix
All of these have been in linux-next this past week with no reported
issues"
* tag 'usb-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: qcserial: add support for Sierra Wireless EM86xx
thunderbolt: Fix connection issue with Pluggable UD-4VPD dock
usb: typec: fix potential out of bounds in ucsi_ccg_update_set_new_cam_cmd()
usb: dwc3: fix fault at system suspend if device was already runtime suspended
usb: typec: qcom-pmic: init value of hdr_len/txbuf_len earlier
usb: musb: sunxi: Fix accessing an released usb phy
USB: serial: io_edgeport: fix use after free in debug printk
USB: serial: option: add Quectel RG650V
USB: serial: option: add Fibocom FG132 0x0112 composition
thunderbolt: Add only on-board retimers when !CONFIG_USB4_DEBUGFS_MARGINING
Linus Torvalds [Sun, 10 Nov 2024 16:53:24 +0000 (08:53 -0800)]
Merge tag 'staging-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are two small memory leak fixes for the vchiq_arm staging driver
that have been sitting in my tree for weeks and should get merged for
6.12-rc7 so that people don't keep tripping over them.
They both have been in linux-next for a while with no reported
problems"
* tag 'staging-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vchiq_arm: Use devm_kzalloc() for drv_mgmt allocation
staging: vchiq_arm: Use devm_kzalloc() for vchiq_arm_state allocation
Mark Brown [Sat, 9 Nov 2024 01:48:51 +0000 (01:48 +0000)]
ASoC: Intel: Fix Kconfig for ACPI=n
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Hi,
A recent attempt to fix a missing symbol when
CONFIG_SND_SOC_SDCA=m and CONFIG_SND_SOC_ACPI_INTEL_SDCA_QUIRKS=y
caused unmet direct dependency warning with randconig.
The reason is that SND_SOC_ACPI_INTEL_MATCH is needed to be compilable
even if ACPI is not selected, modules have dependency on exported
symbols from it.
The only solution for these kconfig dependencies seams to be to
only select SND_SOC_SDCA if ACPI is enabled from
SND_SOC_ACPI_INTEL_SDCA_QUIRKS.
Regards,
Peter
---
Peter Ujfalusi (2):
ASoC: Intel: Kconfig: Only select SND_SOC_SDCA if ACPI is enabled
ASoC: Intel: Kconfig: Revert make SND_SOC_ACPI_INTEL_MATCH depend on
ACPI
Linus Torvalds [Fri, 8 Nov 2024 23:20:45 +0000 (13:20 -1000)]
Merge tag 'thermal-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix one issue in the qcom lmh thermal driver, a DT handling
issue in the thermal core and two issues in the userspace thermal
library:
- Allow tripless thermal zones defined in a DT to be registered in
accordance with the thermal DT bindings (Icenowy Zheng)
- Annotate LMH IRQs with lockdep classes to prevent lockdep from
reporting a possible recursive locking issue that cannot really
occur (Dmitry Baryshkov)
- Improve the thermal library "make clean" to remove a leftover
symbolic link created during compilation and fix the sampling
handler invocation in that library to pass the correct pointer to
it (Emil Dahl Juhl, zhang jiao)"
* tag 'thermal-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/of: support thermal zones w/o trips subnode
tools/lib/thermal: Remove the thermal.h soft link when doing make clean
tools/lib/thermal: Fix sampling handler context ptr
thermal/drivers/qcom/lmh: Remove false lockdep backtrace
Linus Torvalds [Fri, 8 Nov 2024 23:13:54 +0000 (13:13 -1000)]
Merge tag 'pm-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix the asymmetric CPU capacity support code in the intel_pstate
driver, added during this develompent cycle, to address a corner case
in which the capacity of a CPU going online is not updated (Rafael
Wysocki)"
* tag 'pm-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Update asym capacity for CPUs that were offline initially
cpufreq: intel_pstate: Clear hybrid_max_perf_cpu before driver registration
Linus Torvalds [Fri, 8 Nov 2024 23:08:23 +0000 (13:08 -1000)]
Merge tag 'acpi-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix the ACPI processor driver initialization ordering after recent
changes to avoid calling init_freq_invariance_cppc() too early on AMD
platforms (Mario Limonciello)"
* tag 'acpi-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor: Move arch_init_invariance_cppc() call later
Linus Torvalds [Fri, 8 Nov 2024 19:56:27 +0000 (09:56 -1000)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small fixes, the drivers one in ufs simply delays running a work
queue and the generic one in zoned storage switches to a more correct
API that tries the standard buddy allocator first (for small
allocations); this fixes an allocation problem with small allocations
seen under memory pressure"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Start the RTC update work later
scsi: sd_zbc: Use kvzalloc() to allocate REPORT ZONES buffer
Linus Torvalds [Fri, 8 Nov 2024 19:49:32 +0000 (09:49 -1000)]
Merge tag 'drm-fixes-2024-11-09' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes, usual leaders in amdgpu and xe, then a panel quirk, and
some fixes to imagination and panthor drivers. Seems around the usual
level for this time and don't know of any big problems.
panthor:
- Lock VM array
- Be strict about I/O mapping flags
xe:
- Fix ccs_mode setting for Xe2 and later
- Synchronize ccs_mode setting with client creation
- Apply scheduling WA for LNL in additional places as needed
- Fix leak and lock handling in error paths of xe_exec ioctl
- Fix GGTT allocation leak leading to eventual crash in SR-IOV
- Move run_ticks update out of job handling to avoid synchronization
with reader"
* tag 'drm-fixes-2024-11-09' of https://gitlab.freedesktop.org/drm/kernel: (23 commits)
drm/panthor: Be stricter about IO mapping flags
drm/panthor: Lock XArray when getting entries for the VM
drm: panel-orientation-quirks: Make Lenovo Yoga Tab 3 X90F DMI match less strict
drm/xe: Stop accumulating LRC timestamp on job_free
drm/xe/pf: Fix potential GGTT allocation leak
drm/xe: Drop VM dma-resv lock on xe_sync_in_fence_get failure in exec IOCTL
drm/xe: Fix possible exec queue leak in exec IOCTL
drm/amdgpu: add missing size check in amdgpu_debugfs_gprwave_read()
drm/amdgpu: Adjust debugfs eviction and IB access permissions
drm/amdgpu: Adjust debugfs register access permissions
drm/amdgpu: Fix DPX valid mode check on GC 9.4.3
drm/amd/pm: correct the workload setting
drm/amd/pm: always pick the pptable from IFWI
drm/amdgpu: prevent NULL pointer dereference if ATIF is not supported
drm/amd/display: parse umc_info or vram_info based on ASIC
drm/amd/display: Fix brightness level not retained over reboot
drm/xe/guc/tlb: Flush g2h worker in case of tlb timeout
drm/xe/ufence: Flush xe ordered_wq in case of ufence timeout
drm/xe: Move LNL scheduling WA to xe_device.h
drm/xe: Use the filelist from drm for ccs_mode change
...
Dave Airlie [Fri, 8 Nov 2024 19:14:28 +0000 (05:14 +1000)]
Merge tag 'drm-xe-fixes-2024-11-08' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Fix ccs_mode setting for Xe2 and later (Balasubramani)
- Synchronize ccs_mode setting with client creation (Balasubramani)
- Apply scheduling WA for LNL in additional places as needed
(Nirmoy)
- Fix leak and lock handling in error paths of xe_exec ioctl
(Matthew Brost)
- Fix GGTT allocation leak leading to eventual crash in SR-IOV
(Michal Wajdeczko)
- Move run_ticks update out of job handling to avoid synchronization
with reader (Lucas)
projects / users / jedix / linux-maple.git / log