Arnd Bergmann [Mon, 16 Oct 2023 13:04:57 +0000 (15:04 +0200)]
Merge tag 'imx-dt-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree changes for 6.7:
- New board support: Variscite VAR-SOM-MX6 SoM and Custom board.
- A bunch of dt-schema check fixes from Fabio Estevam.
- A couple of MBA6ULX changes from Alexander Stein that marks gpio-buttons
as wakeup-source and improves gpio-keys button node names.
- Add ATM0700D4 panel support for sk-imx53 board.
- Correct regulator node name for imx6qdl-nitrogen6 board.
- A couple of Gateworks i.MX6QDL board update: adding MDIO nodes and
populating Ethernet MAC address.
* tag 'imx-dt-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (31 commits)
ARM: dts: imx7d-pico-pi: Disable USDHC1
ARM: dts: imx28: Fix dcp compatible
ARM: dts: imx7s: Remove #power-domain-cells from gpcv2
ARM: dts: imx25: Remove clock-names from the watchdog
ARM: dts: imx25: Fix sram node
ARM: dts: imx25: Fix dryice node
ARM: dts: imx6qdl-gw5904: add dt props for populating eth MAC addrs
ARM: dts: vfxxx: Write dmas in a single line
ARM: dts: imx27-phytec: Use eeprom as the node name
ARM: dts: imx51: Remove invalid sahara compatible
ARM: dts: imx53: Adjust the ecspi compatible
ARM: dts: imx7ulp: Fix usbphy1 compatible
ARM: dts: imx6q-pistachio: Use a valid value for fsl,tx-d-cal
ARM: dts: imx6q-b650v3: Fix fsl,tx-cal-45-dn-ohms
ARM: dts: imx28-tx28: Move phy_type to USB node
ARM: dts: mxs: Switch to #pwm-cells = <3>
ARM: dts: imx6q: Add Variscite MX6 Custom board support
ARM: dts: imx6qdl: Add Variscite VAR-SOM-MX6 SoM support
ARM: dts: mxs: Fix duart clock-names
ARM: dts: imx6ull/7d-colibri: Fix compatible
...
Arnd Bergmann [Mon, 16 Oct 2023 12:22:46 +0000 (14:22 +0200)]
Merge tag 'imx-bindings-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindings for 6.7:
- Compatibles for new boards: TQ-Systems LS1043A/LS1046A and LS1088
based boards, VAR-SOM-MX6 SoM, SolidRun LX2162A SoM & Clearfog,
and phyGATE-Tauri-L board.
- Add missing i.MX23 based board compatibles.
* tag 'imx-bindings-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: Add TQ-Systems LS1088 based boards
dt-bindings: arm: fsl: Add TQ-Systems LS1043A/LS1046A based boards
dt-bindings: arm: Add SolidRun LX2162A SoM & Clearfog Board
dt-bindings: arm: fsl: add phyGATE-Tauri-L board
dt-bindings: arm: fsl: Document the missing imx23 boards
dt-bindings: arm: fsl: Add VAR-SOM-MX6 SoM with Custom Board
Arnd Bergmann [Fri, 13 Oct 2023 20:51:29 +0000 (22:51 +0200)]
Merge tag 'sunxi-dt-for-6.7-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
- Added V3s nodes for PWM pinctrl, EHCI and OHCI
- RISC-V DT cleanups
- Added new ISA property and PMU node to Allwinner D1
- Added interconnect to R40 video codec node
- New boards: Anbernic RG-Nano, BigTreeTech Pi, BigTreeTech CB1 SOM
* tag 'sunxi-dt-for-6.7-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
riscv: dts: allwinner: convert isa detection to new properties
ARM: dts: sun8i-r40: Add interconnect to video-codec
ARM: dts: sunxi: add support for Anbernic RG-Nano
dt-bindings: arm: sunxi: add Anbernic RG-Nano
ARM: dts: sun8i: v3s: add EHCI and OHCI to v3s dts
arm: dts: sun8i: V3s: Add pinctrl for pwm
riscv: dts: allwinner: d1: Add PMU event node
arm64: dts: allwinner: h616: Add BigTreeTech Pi support
arm64: dts: allwinner: h616: Add BigTreeTech CB1 SoM & boards support
dt-bindings: arm: sunxi: Add BigTreeTech boards
dt-bindings: vendor-prefixes: Add BigTreeTech
arm64: dts: allwinner: h616: Add SID controller node
dt-bindings: nvmem: SID: Add binding for H616 SID controller
riscv: dts: allwinner: remove address-cells from intc node
riscv: dts: use capital "OR" for multiple licenses in SPDX
Arnd Bergmann [Fri, 13 Oct 2023 20:50:32 +0000 (22:50 +0200)]
Merge tag 'tegra-for-6.7-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.7-rc1
This contains some fixes for Tegra234 boards as well as some cleanups
that will help with json-schema validation.
For older devices, there's now support for display on Smaug (a.k.a.
Pixel C) and the IOMMU for host1x is enabled on Tegra132, which should
help with large memory allocations for display and multimedia.
* tag 'tegra-for-6.7-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Use correct interrupts for Tegra234 TKE
arm64: tegra: Add power-sensors for Tegra234 boards
arm64: tegra: Mark Tegra234 SPI as compatible with Tegra114
arm64: tegra: Add dmas and dma-names for Tegra234 UARTE
arm64: tegra: Use correct format for clocks property
arm64: tegra: Remove duplicate nodes on Jetson Orin NX
arm64: tegra: Add missing current-speed for SBSA UART
arm64: tegra: Add display panel node on Smaug
arm64: tegra: Add backlight node on Smaug
arm64: tegra: Add DSI/CSI regulator on Smaug
arm64: tegra: Enable IOMMU for host1x on Tegra132
arm64: tegra: Fix P3767 QSPI speed
arm64: tegra: Fix P3767 card detect polarity
Arnd Bergmann [Fri, 13 Oct 2023 20:46:42 +0000 (22:46 +0200)]
Merge tag 'renesas-dts-for-v6.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.7 (take two)
- Improve audio clock accuracy on the RZ/{G2L,G2LC,V2L} SMARC EVK
development boards,
- Add FLASH support for the Renesas Bock-W development board,
- Add L2 cache and non-coherent DMA support on the RZ/Five SoC and the
RZ/Five SMARC development board,
- Add initial support for the RZ/G3S SoC and the RZ/G3S SMARC SoM and
SMARC Carrier-II EVK development boards,
- Add initial support for the R8A779F4 variant of the R-Car S4-8 SoC
and the R-Car S4 Starter Kit development board,
- Apply DT overlays to base DTBs to improve validation and usability.
* tag 'renesas-dts-for-v6.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (25 commits)
arm64: dts: renesas: Apply overlays to base dtbs
arm64: dts: renesas: rzg3s-smarc-som: Spelling s/device-type/device_type/
arm64: dts: renesas: r9a08g045: Add missing cache-level for L3 cache
arm64: dts: renesas: r9a08g045: Add nodes for SDHI1 and SDHI2
arm64: dts: renesas: ebisu: Document Ebisu-4D support
arm64: dts: renesas: Add R-Car S4 Starter Kit support
arm64: dts: renesas: Add Renesas R8A779F4 SoC support
arm64: dts: renesas: Add initial device tree for RZ/G3S SMARC EVK board
arm64: dts: renesas: Add initial device tree for RZ SMARC Carrier-II Board
arm64: dts: renesas: Add initial support for RZ/G3S SMARC SoM
arm64: dts: renesas: Add initial DTSI for RZ/G3S SoC
riscv: dts: renesas: rzfive-smarc: Enable the blocks which were explicitly disabled
riscv: dts: renesas: r9a07g043f: Add dma-noncoherent property
riscv: dts: renesas: r9a07g043f: Add L2 cache node
ARM: dts: renesas: bockw: Add FLASH node
arm64: dts: renesas: rz-smarc: Use versa3 clk for audio mclk
dt-bindings: clock: renesas,rzg2l-cpg: Document RZ/G3S SoC
clk: tegra: fix error return case for recalc_rate
clk: si521xx: Fix regmap write accessor
clk: si521xx: Use REGCACHE_FLAT instead of NONE
...
Arnd Bergmann [Fri, 13 Oct 2023 20:44:56 +0000 (22:44 +0200)]
Merge tag 'renesas-dt-bindings-for-v6.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DT binding updates for v6.7 (take two)
- Document support for the Renesas RZ/G3S SMARC SoM and SMARC
Carrier-II EVK development boards,
- Document support for the Renesas R-Car S4 Starter Kit.
* tag 'renesas-dt-bindings-for-v6.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: soc: renesas: Document R-Car S4 Starter Kit
dt-bindings: soc: renesas: Document SMARC Carrier-II EVK
dt-bindings: soc: renesas: Document RZ/G3S SMARC SoM
Arnd Bergmann [Fri, 13 Oct 2023 20:44:11 +0000 (22:44 +0200)]
Merge tag 'sti-dt-for-v6.7-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into soc/dt
STi DT for v6.7, round 1 :
stih418-b2264: leds and serial fixes
stih407: drop max-duty-cycle property
stih415/416: remove boards from yaml
stih407/410/418: add boards to yaml
* tag 'sti-dt-for-v6.7-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
dt-bindings: arm: sti: add STi boards and remove stih415/stih416
dt-bindings: soc: sti: add STi platform syscon
ARM: dts: st: correct led level in stih418-b2264.dts
ARM: dts: st: move leds out of soc in stih418-b2264.dts
ARM: dts: st: correct serial alias in stih418-b2264.dts
ARM: dts: st: stih407: drop max-duty-cycle
Arnd Bergmann [Fri, 13 Oct 2023 20:43:09 +0000 (22:43 +0200)]
Merge tag 'omap-for-v6.7/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt
Devicetree changes for omaps for v6.7 merge window
Two non-urgent devicetree fixes for am371-evm led pinmux and a node name
warning fix for omap4-epson-embt2ws, and updates for connected devices for
various devices:
- Device updates and enabling of pru support for am335x-pocketbeagle
- Few more devices such as leds and iio for omap4-epson-embt2ws
- Ethernet and led updates for am3517-evm
- Modem sleep pins configuration for motorola-mapphone
* tag 'omap-for-v6.7/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap4-embt2ws: Fix pinctrl single node name warning
ARM: dts: motorola-mapphone: Add mdm6600 sleep pins
ARM: dts: am3517: Configure ethernet alias
ARM: dts: am3517-evm: Enable Ethernet PHY Interrupt
ARM: dts: am3517-evm: Fix LED3/4 pinmux
ARM: dts: omap3-gta04: Drop superfluous omap36xx compatible
ARM: dts: omap: omap4-embt2ws: Add IMU at control unit
ARM: dts: omap: omap4-embt2ws: Let IMU driver handle Magnetometer internally
ARM: dts: am335x-pocketbeagle: add missing GPIO mux
ARM: dts: am335x-pocketbeagle: enable pru
ARM: dts: am335x-pocketbeagle: remove dependency cycle
ARM: dts: am335x-pocketbeagle: update LED information
ARM: dts: omap4: embt2ws: add LED
Arnd Bergmann [Fri, 13 Oct 2023 20:42:04 +0000 (22:42 +0200)]
Merge tag 'at91-dt-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for 6.7
It contains:
- the new Microchip SAMA5D29 Curiosity board
- a typo fix in TDES node name for SAMA5D4 dtsi
- enablement of RTT as RTC for SAM9X60 Curiosity board
* tag 'at91-dt-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sam9x60_curiosity: Add mandatory dt property for RTT
ARM: dts: at91: sama5d29_curiosity: Add device tree for sama5d29_curiosity board
dt-bindings: ARM: at91: Document Microchip SAMA5D29 Curiosity
ARM: dts: at91/trivial: fix typo in crypto DT naming
Arnd Bergmann [Fri, 13 Oct 2023 20:41:10 +0000 (22:41 +0200)]
Merge tag 'ixp4xx-for-soc-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into soc/dt
Some IXP4xx updates for the v6.7 kernel cycle:
- Provide proper bindings including missing vendor prefixes
for the device trees in use and one more new vendor.
- Add a device tree for USRobotics USR8200 which has two
active users.
- Augment the "reset" GPIO buttons to send KEY_RESTART as
appropriate.
- Enable write on the NSLU2 flash so we get a writeable
rootfs on this device.
* tag 'ixp4xx-for-soc-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: ixp4xx: Use right restart keycode
ARM: dts: ixp4xx-nslu2: Enable write on flash
ARM: dts: ixp4xx: Add USRobotics USR8200 device tree
ARM: dts: Use only the Linksys compatible for now
dt-bindings: arm: List more IXP4xx devices
dt-bindings: Add vendor prefixes
Arnd Bergmann [Fri, 13 Oct 2023 20:29:07 +0000 (22:29 +0200)]
Merge tag 'samsung-dt-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM changes for v6.7
1. Switch all sound cards to generic audio-routing property, supported
since previous release for Samsung drivers. The old
samsung,audio-routing property is deprecated.
2. Correct Exynos4210 thermal by using polling. Apparently interrupts in
Thermal Monitoring Unit are broken.
* tag 'samsung-dt-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: samsung: exynos4210: enable polling
ARM: dts: samsung: s5pv210-galaxys: switch sound card to audio-routing
ARM: dts: samsung: s5pv210-fascinate4g: switch sound card to audio-routing
ARM: dts: samsung: exynos5422-odroid: switch sound card to audio-routing
ARM: dts: samsung: exynos4412-odroid: switch sound card to audio-routing
ARM: dts: samsung: exynos4412-n710x: switch sound card to audio-routing
ARM: dts: samsung: exynos4412-galaxy-s3: switch sound card to audio-routing
ARM: dts: samsung: exynos4212-tab3: switch sound card to audio-routing
Conor Dooley [Mon, 9 Oct 2023 09:37:49 +0000 (10:37 +0100)]
riscv: dts: allwinner: convert isa detection to new properties
Convert the D1 devicetrees to use the new properties
"riscv,isa-base" & "riscv,isa-extensions".
For compatibility with other projects, "riscv,isa" remains.
Thierry Reding [Thu, 12 Oct 2023 12:43:11 +0000 (14:43 +0200)]
arm64: tegra: Use correct interrupts for Tegra234 TKE
The shared interrupts 0-9 of the TKE are mapped to interrupts 0-9, but
shared interrupts 10-15 are mapped to 256-261. Correct the mapping for
the final 6 interrupts. This prevents the TKE from requesting the RTC
interrupt (along with several GTE and watchdog interrupts).
Jon Hunter [Fri, 29 Sep 2023 10:36:50 +0000 (11:36 +0100)]
arm64: tegra: Add power-sensors for Tegra234 boards
Populate the ina219 and ina3221 power-sensors for the various Tegra234
boards. These sensors are located on the Tegra234 module boards and the
configuration of some sensors is common across the different Tegra234
modules. Therefore, add any common sensor configurations to appropriate
device tree source file so it can be re-used across modules.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
ARM: dts: st: correct serial alias in stih418-b2264.dts
Aliases should only contain lowercase, digits or - hence
correct the alias for the serial from ttyAS0 into serial0
as already done for the other boards.
arch/arm64/boot/dts/renesas/r9a08g045s33-smarc.dt: /: memory@48000000: 'device-type' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/memory.yaml#
arch/arm64/boot/dts/renesas/r9a08g045s33-smarc.dtb: /: memory@48000000: 'device_type' is a required property
from schema $id: http://devicetree.org/schemas/memory.yaml#
Claudiu Beznea [Tue, 10 Oct 2023 13:27:01 +0000 (16:27 +0300)]
arm64: dts: renesas: r9a08g045: Add missing cache-level for L3 cache
Fix the following DTBS check warnings:
arch/arm64/boot/dts/renesas/r9a08g045s33-smarc.dtb: cache-controller-0: 'cache-level' is a required property
from schema $id: http://devicetree.org/schemas/cache.yaml#
arch/arm64/boot/dts/renesas/r9a08g045s33-smarc.dtb: cache-controller-0: 'cache-level' is a required property
from schema $id: http://devicetree.org/schemas/cache.yaml#
arch/arm64/boot/dts/renesas/r9a08g045s33-smarc.dtb: cache-controller-0: Unevaluated properties are not allowed ('cache-size', 'cache-unified' were unexpected)
from schema $id: http://devicetree.org/schemas/cache.yaml#
Arnd Bergmann [Thu, 12 Oct 2023 10:57:06 +0000 (12:57 +0200)]
Merge tag 'samsung-dt64-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.7
1. Exynos850: Add support for USB 2.0 (host and device) and enable it on
E850-96 board.
2. Exynos5433: Switch sound card to generic audio-routing property,
supported since previous release for Samsung drivers. The old
samsung,audio-routing property is deprecated.
3. Few cleanups.
* tag 'samsung-dt64-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: remove unused TMU alias
arm64: dts: exynos: Use pinctrl macros for exynos5433-tm2
arm64: dts: exynos: exynos5433-tm2: switch sound card to audio-routing
arm64: dts: exynos: Enable USB support on E850-96 board
arm64: dts: exynos: Enable USB in Exynos850
Arnd Bergmann [Thu, 12 Oct 2023 10:56:19 +0000 (12:56 +0200)]
Merge tag 'dt-cleanup-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements in ARM DTS for v6.7
Few cleanups and improvements: split joined reg entries for Ethernet in
omap3-devkit8000, add missing spaces before '{' (MediaTek, Nuvoton) and
cleanup whitespace around '=' (MediaTek).
* tag 'dt-cleanup-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
ARM: dts: nuvoton: add missing space before {
ARM: dts: mediatek: minor whitespace cleanup around '='
ARM: dts: mediatek: add missing space before {
ARM: dts: omap3-devkit8000: correct ethernet reg addresses (split)
Arnd Bergmann [Thu, 12 Oct 2023 10:53:31 +0000 (12:53 +0200)]
Merge tag 'dt64-cleanup-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements in ARM64 DTS for v6.7
Few cleanups and improvements: use lowercase hex for unit addresses
(Bitmain), add missing spaces before '{' (APM, MediaTek) and cleanup
whitespace around '=' (MediaTek, Marvell).
* tag 'dt64-cleanup-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
arm64: dts: marvell: minor whitespace cleanup around '='
arm64: dts: mediatek: minor whitespace cleanup around '='
arm64: dts: mediatek: add missing space before {
arm64: dts: apm: add missing space before {
arm64: dts: bitmain: lowercase unit addresses
Arnd Bergmann [Thu, 12 Oct 2023 10:37:31 +0000 (12:37 +0200)]
Merge tag 'renesas-dts-for-v6.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.7
- Add PCIe Host and Endpoint support for the R-Car S4-8 SoC and the
Renesas Spider development board,
- Add FLASH support for the Renesas Genmai and RSK+RZA1 development
boards,
- Add multi Component sound support for Renesas ULCB development
boards equipped with the Shimafuji Kingfisher extension,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: ulcb/kf: Use multi Component sound
ARM: dts: renesas: rskrza1: Add FLASH nodes
ARM: dts: renesas: genmai: Add FLASH nodes
ARM: dts: renesas: wheat: Move Ethernet node to LBSC
ARM: dts: renesas: blanche: Move Ethernet node to LBSC
ARM: dts: renesas: marzen: Move Ethernet node to LBSC
ARM: dts: renesas: r8a7792: Add LBSC node
ARM: dts: renesas: r8a7779: Add LBSC node
ARM: dts: renesas: r7s72100: Add BSC node
ARM: dts: renesas: Remove unused LBSC nodes from board DTS
arm64: dts: renesas: r8a779f0: spider: Enable PCIe Host ch0
arm64: dts: renesas: r8a779f0: Add PCIe Host and Endpoint nodes
ARM: dts: renesas: gr-peach: Remove unneeded probe-type property
ARM: dts: renesas: ape6evm: Drop bogus "mtd-rom" compatible value
ARM: dts: renesas: blanche: Fix typo in GP_11_2 pin name
arm64: dts: renesas: Handle ADG bit for sound clk_i
Maxim Schwalm [Mon, 7 Aug 2023 14:35:11 +0000 (17:35 +0300)]
ARM: tegra: Drop unit-address from parallel RGB output port
Fix the following W=1 build warning:
"Warning (unit_address_vs_reg): /host1x@50000000/dc@54200000/rgb/port@0:
node has a unit name, but no reg or ranges property"
dt-bindings: arm: tegra: pmc: Restructure pad configuration node schema
The pad configuration node schema in its current form can accidentally
match other properties as well. Restructure the schema to better match
how the device trees are using these.
Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
For indented subschemas it can be difficult to understand which block an
additionalProperties property belongs to. Moving it closer to the
beginning of a block is a good way to clarify this.
Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
Reformat the description of various properties to make them more
consistent with existing ones. Make use of json-schema's ability to
provide a description for individual list items to make improve the
documentation further.
Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Thu, 17 Aug 2023 14:14:07 +0000 (16:14 +0200)]
arm64: tegra: Mark Tegra234 SPI as compatible with Tegra114
According to the bindings, both Tegra210 and Tegra114 compatible strings
need to be specified since the version of this hardware block found in
Tegra210 is backwards-compatible.
Thierry Reding [Thu, 17 Aug 2023 14:14:06 +0000 (16:14 +0200)]
arm64: tegra: Add dmas and dma-names for Tegra234 UARTE
Commit 940acdac99b2 ("arm64: tegra: Add UARTE device tree node on
Tegra234") added the device tree node for the UARTE on Tegra234 but
didn't include the "dmas" and "dma-names" properties required for this
device when it's used in high-speed mode.
Thierry Reding [Thu, 17 Aug 2023 14:14:04 +0000 (16:14 +0200)]
arm64: tegra: Remove duplicate nodes on Jetson Orin NX
The SBSA UART and TCU as well as the TCU alias and the stdout-path are
configured via the P3768 carrier board DTS include, so the can be
removed from the system DTS file.
Thierry Reding [Thu, 17 Aug 2023 14:14:03 +0000 (16:14 +0200)]
arm64: tegra: Add missing current-speed for SBSA UART
The SBSA UART device tree bindings require a current-speed property that
specifies the baud rate configured by the firmware. Add it on Jetson AGX
Orin and Jetson Orin Nano/NX.
Fabio Estevam [Mon, 2 Oct 2023 02:00:23 +0000 (23:00 -0300)]
ARM: dts: imx28: Fix dcp compatible
Per fsl-dcp.yaml, passing "fsl,imx28-dcp", "fsl,imx23-dcp" is not
valid.
Change it to pass only "fsl,imx28-dcp" to fix the following
schema warning:
crypto@80028000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx28-dcp', 'fsl,imx23-dcp'] is too long
'fsl,imx28-dcp' is not one of ['fsl,imx6sl-dcp', 'fsl,imx6ull-dcp']
'fsl,imx28-dcp' was expected
ARM: dts: imx7s: Remove #power-domain-cells from gpcv2
Per fsl,imx-gpcv2.yaml, '#power-domain-cells' is not a valid
property for the top-level gpcv2 node. It is only valid
for its children nodes.
Remove it to fix the following schema warning:
gpc@303a0000: '#power-domain-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/power/fsl,imx-gpcv2.yaml#
ARM: dts: imx25: Remove clock-names from the watchdog
Per fsl-imx-wdt, 'clock-names' is not a valid property.
Remove it to fix the following schema warning:
watchdog@53fdc000: Unevaluated properties are not allowed ('clock-names' was unexpected)
from schema $id: http://devicetree.org/schemas/watchdog/fsl-imx-wdt.yaml
Per sram.yaml, address-cells, size-cells and ranges are mandatory.
Pass them to fix the following schema warnings:
sram@78000000: '#address-cells' is a required property
from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
sram@78000000: '#size-cells' is a required property
from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
sram@78000000: 'ranges' is a required property
from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
Per imxdi-rtc.yaml, there is only one valid compatible entry and
clock-names is not a valid property.
Change it to fix the following schema warnings:
dryice@53ffc000: compatible: ['fsl,imx25-dryice', 'fsl,imx25-rtc'] is too long
from schema $id: http://devicetree.org/schemas/rtc/imxdi-rtc.yaml#
dryice@53ffc000: 'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/rtc/imxdi-rtc.yaml#
Josua Mayer [Sun, 1 Oct 2023 10:32:58 +0000 (12:32 +0200)]
dt-bindings: arm: Add SolidRun LX2162A SoM & Clearfog Board
SolidRun now have 2 product lines around NXP Layerscape SoC:
- LX2160A COM Express 7
- LX2162A System on Module
LX2162 is a smaller package and reduced feature set to LX2160A;
LX2162 SoM is also a smaller form factor and reduced feature set to CEX.
Since both product lines are physically incompatible,
the existing group "SolidRun LX2160A based Boards" has been renamed to
include "CEX" in its name, meaning products based on LX2160A COM Express
Module, following this pattern:
"solidrun,<board>", "solidrun,lx2160a-cex", "fsl,lx2160a"
Add DT compatible for both SolidRun LX2162A SoM, and LX2162 Clearfog
boards to a new group based on LX2162A SoM, following this pattern:
"solidrun,<board>", "solidrun,lx2162a-som", "fsl,lx2160a"
The "reset" key on a few IXP4xx routers were sending KEY_ESC
but what we want to send is KEY_RESTART which will make
OpenWrt and similar userspace do a controlled reboot.
Linus Walleij [Sat, 7 Oct 2023 12:15:11 +0000 (14:15 +0200)]
dt-bindings: Add vendor prefixes
These vendor prefixes are used by some routers supported
by e.g. OpenWrt.
- ADI Engineering is a US telecom equipment company.
- Arcom Controllers is a US manufacturer of repeaters.
- Freecom Gmbh is a german telecom equipment company.
- Gemtek Technology is a Taiwan telecom company.
- Gateway Communications was a telecommunication company,
now acquired by HKT Limited/PCCW.
- Goramo Gorecki is a privately owned Polish telecom
company.
- U.S. Robotics Corporation, known through their brand name
USRobotics is generally referred to as "USR" so use this
prefix for the company's device tree bindings.
Per fsl-imx-sahara.yaml, there should not be a 'fsl,imx51-sahara'
compatible.
Remove it to fix the following schema warning:
imx51-apf51.dtb: crypto@83ff8000: compatible: ['fsl,imx53-sahara', 'fsl,imx51-sahara'] is too long
from schema $id: http://devicetree.org/schemas/crypto/fsl-imx-sahara.yaml#
Tony Lindgren [Sat, 7 Oct 2023 07:32:46 +0000 (10:32 +0300)]
ARM: dts: omap4-embt2ws: Fix pinctrl single node name warning
Looks like one pinctrl single binding warning sneaked in while we were
implementing the yaml binding. Let's fix the 'pinmux-wl12xx-gpio' does not
match any of the regexes warning by adding -pins suffix.
The sleep pins never got added earlier probably because the driver was not
behaving correctly with the sleep pins. We need the sleep pins to prevent
the modem from waking up on it's own if the reset pin glitches in deeper
SoC idle states.
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Message-ID: <20230911035828.36984-1-tony@atomide.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Adam Ford [Thu, 5 Oct 2023 00:04:01 +0000 (19:04 -0500)]
ARM: dts: am3517-evm: Fix LED3/4 pinmux
The pinmux for LED3 and LED4 are incorrectly attached to the
omap3_pmx_core when they should be connected to the omap3_pmx_wkup
pin mux. This was likely masked by the fact that the bootloader
used to do all the pinmuxing.
Fixes: 0dbf99542caf ("ARM: dts: am3517-evm: Add User LEDs and Pushbutton") Signed-off-by: Adam Ford <aford173@gmail.com>
Message-ID: <20231005000402.50879-1-aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Andreas Kemnade [Wed, 4 Oct 2023 06:53:23 +0000 (08:53 +0200)]
ARM: dts: omap3-gta04: Drop superfluous omap36xx compatible
Drop omap36xx compatible as done in other omap3630 devices.
This has apparently fallen through the lattice.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Message-ID: <20231004065323.2408615-1-andreas@kemnade.info> Signed-off-by: Tony Lindgren <tony@atomide.com>
Andreas Kemnade [Wed, 27 Sep 2023 17:32:45 +0000 (19:32 +0200)]
ARM: dts: omap: omap4-embt2ws: Add IMU at control unit
Add also the level-shifter flag to avoid probe failure in magnetometer
probe.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Message-ID: <20230927173245.2151083-4-andreas@kemnade.info> Signed-off-by: Tony Lindgren <tony@atomide.com>
arm64: dts: renesas: Add initial support for RZ/G3S SMARC SoM
Add initial support for the RZ/G3S SMARC SoM. The following devices
available on the SoM are added to this initial device tree:
- RZ/G3S SoC: Renesas R9A08G045S33GBG
- Clock Generator (only 24MHz output): Renesas 5L35023B
- 1GiB LPDDR4 SDRAM: Micron MT53D512M16D1DS-046
- 64GB eMMC Flash (though SD ch0): Micron MTFC64GBCAQTC
SD channel 0 of RZ/G3S is connected to an uSD card interface and an
eMMC. The selection b/w them is done through a hardware switch. The DT
will select b/w uSD and eMMC through the SW_SD0_DEV_SEL build flag.
arm64: dts: renesas: Add initial DTSI for RZ/G3S SoC
Add the initial DTSI for the RZ/G3S SoC.
The files in this commit have the following meaning:
- r9a08g045.dtsi: RZ/G3S family SoC common parts
- r9a08g045s33.dtsi: RZ/G3S R0A08G045S33 SoC specific parts
riscv: dts: renesas: rzfive-smarc: Enable the blocks which were explicitly disabled
Now that noncoherent dma support for the RZ/Five SoC has been added, enable
the IP blocks which were disabled on the RZ/Five SMARC. This adds
support for the below peripherals:
* Ethernet
* DMAC
* SDHI
* USB
* RSPI
* SSI
Add a device node for the Spansion S29GL512P NOR FLASH on the Bock-W
development board. This FLASH resides in the external address space of
the Local Bus State Controller.
Biju Das [Fri, 25 Aug 2023 09:05:18 +0000 (10:05 +0100)]
arm64: dts: renesas: rz-smarc: Use versa3 clk for audio mclk
Currently audio mclk uses a fixed clk of 11.2896MHz (multiple of 44.1kHz).
Replace this fixed clk with the programmable versa3 clk that can provide
the clocking to support both 44.1kHz (with a clock of 11.2896MHz) and
48kHz (with a clock of 12.2880MHz), based on audio sampling rate for
playback and record.
Geert Uytterhoeven [Thu, 5 Oct 2023 12:21:59 +0000 (14:21 +0200)]
Merge tag 'clk-fixes-for-linus' of https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux into renesas-dts-for-v6.7
Adding versa3 clock generator nodes to DTS depends on the fixed clock
index handling:
- Fix the binding for versaclock3 that was introduced this merge window
so we know what the values are for clk consumers
Document the Renesas SMARC Carrier-II EVK board which is based on the
Renesas RZ/G3S SMARC SoM. The SMARC Carrier-II EVK consists of an
RZ/G3S SoM module and a SMARC Carrier-II carrier board; the SoM module
sits on top of the carrier board.
Add documentation for the RZ/G3S CPG. The RZ/G3S CPG module is almost
identical to the one available in RZ/G2{L,UL}, the exception being some
core clocks as follows:
- The SD clock is composed of a mux and a divider, and the divider
has some limitations (div = 1 cannot be set if mux rate is 800MHz),
- There are 3 SD clocks,
- The OCTA and TSU clocks are specific to RZ/G3S,
- PLL1/4/6 are specific to RZ/G3S with its own computation formula.
Even with this RZ/G3S could use the same bindings as RZ/G2L.
Along with documentation bindings for the RZ/G3S (R9A08G045) Clock Pulse
Generator (CPG) core clocks, module clocks and resets were added.
ARM: dts: at91: sam9x60_curiosity: Add mandatory dt property for RTT
atmel,rtt-rtc-time-reg is a mandatory property and encodes the GPBR
register used to store the time base when the RTT is used as an RTC.
Align the RTT with what's currently done for sam9x60ek and sama7g5ek,
and enable it by default even if RTC is also enabled.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
[nicolas.ferre@microchip.com: adapt to newer kernel] Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20230928143644.208515-1-nicolas.ferre@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Chris Morgan [Fri, 29 Sep 2023 14:44:41 +0000 (09:44 -0500)]
ARM: dts: sunxi: add support for Anbernic RG-Nano
The Anbernic RG-Nano is a small portable game device based on the
Allwinner V3s SoC. It has GPIO buttons on the face and side for
input, a single mono speaker, a 240x240 SPI controlled display, a USB-C
OTG port, an SD card slot for booting, and 64MB of RAM included in the
SoC. There does not appear to be a crystal feeding the internal RTC so
it does not keep proper time (for me it ran 8 hours slow in a 24 hour
period). External RTC works just fine.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20230929144441.3409-5-macroalpha82@gmail.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
projects / users / willy / xarray.git / log