Easwar Hariharan [Tue, 25 Feb 2025 20:17:24 +0000 (20:17 +0000)]
power: supply: da9030: convert timeouts to secs_to_jiffies()
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the
multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
Easwar Hariharan [Tue, 25 Feb 2025 20:17:23 +0000 (20:17 +0000)]
xfs: convert timeouts to secs_to_jiffies()
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the
multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
Easwar Hariharan [Tue, 25 Feb 2025 20:17:22 +0000 (20:17 +0000)]
ata: libata-zpodd: convert timeouts to secs_to_jiffies()
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the
multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
Easwar Hariharan [Tue, 25 Feb 2025 20:17:19 +0000 (20:17 +0000)]
btrfs: convert timeouts to secs_to_jiffies()
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the
multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
Easwar Hariharan [Tue, 25 Feb 2025 20:17:18 +0000 (20:17 +0000)]
ALSA: ac97: convert timeouts to secs_to_jiffies()
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the
multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
Easwar Hariharan [Tue, 25 Feb 2025 20:17:17 +0000 (20:17 +0000)]
accel/habanalabs: convert timeouts to secs_to_jiffies()
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the
multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
Easwar Hariharan [Tue, 25 Feb 2025 20:17:16 +0000 (20:17 +0000)]
scsi: lpfc: convert timeouts to secs_to_jiffies()
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the
multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
Easwar Hariharan [Tue, 25 Feb 2025 20:17:15 +0000 (20:17 +0000)]
coccinelle: misc: secs_to_jiffies: Patch expressions too
Patch series "Converge on using secs_to_jiffies() part two", v3.
This is the second series that converts users of msecs_to_jiffies() that
either use the multiply pattern of either of:
- msecs_to_jiffies(N*1000) or
- msecs_to_jiffies(N*MSEC_PER_SEC)
where N is a constant or an expression, to avoid the multiplication.
The conversion is made with Coccinelle with the secs_to_jiffies() script
in scripts/coccinelle/misc. Attention is paid to what the best change can
be rather than restricting to what the tool provides.
This patch (of 16):
Teach the script to suggest conversions for timeout patterns where the
arguments to msecs_to_jiffies() are expressions as well.
Link: https://lkml.kernel.org/r/20250225-converge-secs-to-jiffies-part-two-v3-0-a43967e36c88@linux.microsoft.com Link: https://lkml.kernel.org/r/20250225-converge-secs-to-jiffies-part-two-v3-1-a43967e36c88@linux.microsoft.com Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com> Cc: Mark Brown <broonie@kernel.org> Cc: Carlos Maiolino <cem@kernel.org> Cc: Chris Mason <clm@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Damien Le Maol <dlemoal@kernel.org> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: David Sterba <dsterba@suse.com> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Cc: Dongsheng Yang <dongsheng.yang@easystack.cn> Cc: Fabio Estevam <festevam@gmail.com> Cc: Frank Li <frank.li@nxp.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ilpo Jarvinen <ilpo.jarvinen@linux.intel.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: James Bottomley <james.bottomley@HansenPartnership.com> Cc: James Smart <james.smart@broadcom.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Julia Lawall <julia.lawall@inria.fr> Cc: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com> Cc: Keith Busch <kbusch@kernel.org> Cc: Leon Romanovsky <leon@kernel.org> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Nicolas Palix <nicolas.palix@imag.fr> Cc: Niklas Cassel <cassel@kernel.org> Cc: Oded Gabbay <ogabbay@kernel.org> Cc: Takashi Iwai <tiwai@suse.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Sebastian Reichel <sre@kernel.org> Cc: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Shyam-sundar S-k <Shyam-sundar.S-k@amd.com> Cc: Takashi Iwai <tiwai@suse.com> Cc: Xiubo Li <xiubli@redhat.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Brendan Jackman [Thu, 20 Feb 2025 12:23:40 +0000 (12:23 +0000)]
scripts/gdb: add $lx_per_cpu_ptr()
We currently have $lx_per_cpu() which works fine for stuff that kernel
code would access via per_cpu(). But this doesn't work for stuff that
kernel code accesses via per_cpu_ptr():
(gdb) p $lx_per_cpu(node_data[1].node_zones[2]->per_cpu_pageset)
Cannot access memory at address 0xffff11105fbd6c28
This is because we take the address of the pointer and use that as the
offset, instead of using the stored value.
Add a GDB version that mirrors the kernel API, which uses the pointer
value.
To be consistent with per_cpu_ptr(), we need to return the pointer value
instead of dereferencing it for the user. Therefore, move the existing
dereference out of the per_cpu() Python helper and do that only in the
$lx_per_cpu() implementation.
Kuan-Wei Chiu [Sat, 15 Feb 2025 16:56:18 +0000 (00:56 +0800)]
lib min_heap: use size_t for array size and index variables
Replace the int type with size_t for variables representing array sizes
and indices in the min-heap implementation. Using size_t aligns with
standard practices for size-related variables and avoids potential issues
on platforms where int may be insufficient to represent all valid sizes or
indices.
Ahmad Fatoum [Mon, 17 Feb 2025 20:39:52 +0000 (21:39 +0100)]
reboot: retire hw_protection_reboot and hw_protection_shutdown helpers
The hw_protection_reboot and hw_protection_shutdown functions mix
mechanism with policy: They let the driver requesting an emergency action
for hardware protection also decide how to deal with it.
This is inadequate in the general case as a driver reporting e.g. an
imminent power failure can't know whether a shutdown or a reboot would be
more appropriate for a given hardware platform.
With the addition of the hw_protection parameter, it's now possible to
configure at runtime the default emergency action and drivers are expected
to use hw_protection_trigger to have this parameter dictate policy.
As no current users of either hw_protection_shutdown or
hw_protection_shutdown helpers remain, remove them, as not to tempt driver
authors to call them.
Existing users now either defer to hw_protection_trigger or call
__hw_protection_trigger with a suitable argument directly when they have
inside knowledge on whether a reboot or shutdown would be more
appropriate.
Link: https://lkml.kernel.org/r/20250217-hw_protection-reboot-v3-12-e1c09b090c0c@pengutronix.de Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Cc: Benson Leung <bleung@chromium.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Guenter Roeck <groeck@chromium.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Matteo Croce <teknoraver@meta.com> Cc: Matti Vaittinen <mazziesaccount@gmail.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Rob Herring (Arm) <robh@kernel.org> Cc: Rui Zhang <rui.zhang@intel.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: "Serge E. Hallyn" <serge@hallyn.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ahmad Fatoum [Mon, 17 Feb 2025 20:39:51 +0000 (21:39 +0100)]
thermal: core: allow user configuration of hardware protection action
In the general case, we don't know which of system shutdown or reboot is
the better action to take to protect hardware in an emergency situation.
We thus allow the policy to come from the device-tree in the form of an
optional critical-action OF property, but so far there was no way for the
end user to configure this.
With recent addition of the hw_protection parameter, the user can now
choose a default action for the case, where the driver isn't fully sure
what's the better course of action.
Let's make use of this by passing HWPROT_ACT_DEFAULT in absence of the
critical-action OF property.
As HWPROT_ACT_DEFAULT is shutdown by default, this introduces no
functional change for users, unless they start using the new parameter.
Link: https://lkml.kernel.org/r/20250217-hw_protection-reboot-v3-11-e1c09b090c0c@pengutronix.de Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Cc: Benson Leung <bleung@chromium.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Guenter Roeck <groeck@chromium.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Matteo Croce <teknoraver@meta.com> Cc: Matti Vaittinen <mazziesaccount@gmail.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Rob Herring (Arm) <robh@kernel.org> Cc: Rui Zhang <rui.zhang@intel.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: "Serge E. Hallyn" <serge@hallyn.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ahmad Fatoum [Mon, 17 Feb 2025 20:39:50 +0000 (21:39 +0100)]
dt-bindings: thermal: give OS some leeway in absence of critical-action
An operating system may allow its user to configure the action to be
undertaken on critical overtemperature events.
However, the bindings currently mandate an absence of the critical-action
property to be equal to critical-action = "shutdown", which would mean any
differing user configuration would violate the bindings.
Resolve this by documenting the absence of the property to mean that the
OS gets to decide.
Link: https://lkml.kernel.org/r/20250217-hw_protection-reboot-v3-10-e1c09b090c0c@pengutronix.de Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Acked-by: Rob Herring (Arm) <robh@kernel.org> Cc: Benson Leung <bleung@chromium.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Guenter Roeck <groeck@chromium.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Matteo Croce <teknoraver@meta.com> Cc: Matti Vaittinen <mazziesaccount@gmail.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Rui Zhang <rui.zhang@intel.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ahmad Fatoum [Mon, 17 Feb 2025 20:39:49 +0000 (21:39 +0100)]
platform/chrome: cros_ec_lpc: prepare for hw_protection_shutdown removal
In the general case, a driver doesn't know which of system shutdown or
reboot is the better action to take to protect hardware in an emergency
situation. For this reason, hw_protection_shutdown is going to be removed
in favor of hw_protection_trigger, which defaults to shutdown, but may be
configured at kernel runtime to be a reboot instead.
The ChromeOS EC situation is different as we do know that shutdown is the
correct action as the EC is programmed to force reset after the short
period, thus replace hw_protection_shutdown with __hw_protection_trigger
with HWPROT_ACT_SHUTDOWN as argument to maintain the same behavior.
No functional change.
Link: https://lkml.kernel.org/r/20250217-hw_protection-reboot-v3-9-e1c09b090c0c@pengutronix.de Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Acked-by: Tzung-Bi Shih <tzungbi@kernel.org> Cc: Benson Leung <bleung@chromium.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Guenter Roeck <groeck@chromium.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Matteo Croce <teknoraver@meta.com> Cc: Matti Vaittinen <mazziesaccount@gmail.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Rob Herring (Arm) <robh@kernel.org> Cc: Rui Zhang <rui.zhang@intel.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: "Serge E. Hallyn" <serge@hallyn.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ahmad Fatoum [Mon, 17 Feb 2025 20:39:48 +0000 (21:39 +0100)]
regulator: allow user configuration of hardware protection action
When the core detects permanent regulator hardware failure or imminent
power failure of a critical supply, it will call hw_protection_shutdown in
an attempt to do a limited orderly shutdown followed by powering off the
system.
This doesn't work out well for many unattended embedded systems that don't
have support for shutdown and that power on automatically when power is
supplied:
- A brief power cycle gets detected by the driver
- The kernel powers down the system and SoC goes into shutdown mode
- Power is restored
- The system remains oblivious to the restored power
- System needs to be manually power cycled for a duration long enough
to drain the capacitors
Allow users to fix this by calling the newly introduced
hw_protection_trigger() instead: This way the hw_protection commandline or
sysfs parameter is used to dictate the policy of dealing with the
regulator fault.
Link: https://lkml.kernel.org/r/20250217-hw_protection-reboot-v3-8-e1c09b090c0c@pengutronix.de Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Cc: Benson Leung <bleung@chromium.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Guenter Roeck <groeck@chromium.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Matteo Croce <teknoraver@meta.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Rob Herring (Arm) <robh@kernel.org> Cc: Rui Zhang <rui.zhang@intel.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: "Serge E. Hallyn" <serge@hallyn.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ahmad Fatoum [Mon, 17 Feb 2025 20:39:47 +0000 (21:39 +0100)]
reboot: add support for configuring emergency hardware protection action
We currently leave the decision of whether to shutdown or reboot to
protect hardware in an emergency situation to the individual drivers.
This works out in some cases, where the driver detecting the critical
failure has inside knowledge: It binds to the system management controller
for example or is guided by hardware description that defines what to do.
In the general case, however, the driver detecting the issue can't know
what the appropriate course of action is and shouldn't be dictating the
policy of dealing with it.
Therefore, add a global hw_protection toggle that allows the user to
specify whether shutdown or reboot should be the default action when the
driver doesn't set policy.
This introduces no functional change yet as hw_protection_trigger() has no
callers, but these will be added in subsequent commits.
[arnd@arndb.de: hide unused hw_protection_attr] Link: https://lkml.kernel.org/r/20250224141849.1546019-1-arnd@kernel.org Link: https://lkml.kernel.org/r/20250217-hw_protection-reboot-v3-7-e1c09b090c0c@pengutronix.de Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Cc: Benson Leung <bleung@chromium.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Guenter Roeck <groeck@chromium.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Matteo Croce <teknoraver@meta.com> Cc: Matti Vaittinen <mazziesaccount@gmail.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Rob Herring (Arm) <robh@kernel.org> Cc: Rui Zhang <rui.zhang@intel.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: "Serge E. Hallyn" <serge@hallyn.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ahmad Fatoum [Mon, 17 Feb 2025 20:39:46 +0000 (21:39 +0100)]
reboot: indicate whether it is a HARDWARE PROTECTION reboot or shutdown
It currently depends on the caller, whether we attempt a hardware
protection shutdown (poweroff) or a reboot. A follow-up commit will make
this partially user-configurable, so it's a good idea to have the
emergency message clearly state whether the kernel is going for a reboot
or a shutdown.
Link: https://lkml.kernel.org/r/20250217-hw_protection-reboot-v3-6-e1c09b090c0c@pengutronix.de Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Cc: Benson Leung <bleung@chromium.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Guenter Roeck <groeck@chromium.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Matteo Croce <teknoraver@meta.com> Cc: Matti Vaittinen <mazziesaccount@gmail.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Rob Herring (Arm) <robh@kernel.org> Cc: Rui Zhang <rui.zhang@intel.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: "Serge E. Hallyn" <serge@hallyn.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ahmad Fatoum [Mon, 17 Feb 2025 20:39:45 +0000 (21:39 +0100)]
reboot: rename now misleading __hw_protection_shutdown symbols
The __hw_protection_shutdown function name has become misleading since it
can cause either a shutdown (poweroff) or a reboot depending on its
argument.
To avoid further confusion, let's rename it, so it doesn't suggest that a
poweroff is all it can do.
Link: https://lkml.kernel.org/r/20250217-hw_protection-reboot-v3-5-e1c09b090c0c@pengutronix.de Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Cc: Benson Leung <bleung@chromium.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Guenter Roeck <groeck@chromium.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Matteo Croce <teknoraver@meta.com> Cc: Matti Vaittinen <mazziesaccount@gmail.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Rob Herring (Arm) <robh@kernel.org> Cc: Rui Zhang <rui.zhang@intel.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: "Serge E. Hallyn" <serge@hallyn.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ahmad Fatoum [Mon, 17 Feb 2025 20:39:43 +0000 (21:39 +0100)]
docs: thermal: sync hardware protection doc with code
Originally, the thermal framework's only hardware protection action was to
trigger a shutdown. This has been changed a little over a year ago to
also support rebooting as alternative hardware protection action.
Update the documentation to reflect this.
Link: https://lkml.kernel.org/r/20250217-hw_protection-reboot-v3-3-e1c09b090c0c@pengutronix.de Fixes: 62e79e38b257 ("thermal/thermal_of: Allow rebooting after critical temp") Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Cc: Benson Leung <bleung@chromium.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Guenter Roeck <groeck@chromium.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Matteo Croce <teknoraver@meta.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Rob Herring (Arm) <robh@kernel.org> Cc: Rui Zhang <rui.zhang@intel.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: "Serge E. Hallyn" <serge@hallyn.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ahmad Fatoum [Mon, 17 Feb 2025 20:39:42 +0000 (21:39 +0100)]
reboot: reboot, not shutdown, on hw_protection_reboot timeout
hw_protection_shutdown() will kick off an orderly shutdown and if that
takes longer than a configurable amount of time, an emergency shutdown
will occur.
Recently, hw_protection_reboot() was added for those systems that don't
implement a proper shutdown and are better served by rebooting and having
the boot firmware worry about doing something about the critical
condition.
On timeout of the orderly reboot of hw_protection_reboot(), the system
would go into shutdown, instead of reboot. This is not a good idea, as
going into shutdown was explicitly not asked for.
Fix this by always doing an emergency reboot if hw_protection_reboot() is
called and the orderly reboot takes too long.
Link: https://lkml.kernel.org/r/20250217-hw_protection-reboot-v3-2-e1c09b090c0c@pengutronix.de Fixes: 79fa723ba84c ("reboot: Introduce thermal_zone_device_critical_reboot()") Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Cc: Benson Leung <bleung@chromium.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Guenter Roeck <groeck@chromium.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Matteo Croce <teknoraver@meta.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Rob Herring (Arm) <robh@kernel.org> Cc: Rui Zhang <rui.zhang@intel.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: "Serge E. Hallyn" <serge@hallyn.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ahmad Fatoum [Mon, 17 Feb 2025 20:39:41 +0000 (21:39 +0100)]
reboot: replace __hw_protection_shutdown bool action parameter with an enum
Patch series "reboot: support runtime configuration of emergency
hw_protection action", v3.
We currently leave the decision of whether to shutdown or reboot to
protect hardware in an emergency situation to the individual drivers.
This works out in some cases, where the driver detecting the critical
failure has inside knowledge: It binds to the system management controller
for example or is guided by hardware description that defines what to do.
This is inadequate in the general case though as a driver reporting e.g.
an imminent power failure can't know whether a shutdown or a reboot would
be more appropriate for a given hardware platform.
To address this, this series adds a hw_protection kernel parameter and
sysfs toggle that can be used to change the action from the shutdown
default to reboot. A new hw_protection_trigger API then makes use of this
default action.
My particular use case is unattended embedded systems that don't have
support for shutdown and that power on automatically when power is
supplied:
- A brief power cycle gets detected by the driver
- The kernel powers down the system and SoC goes into shutdown mode
- Power is restored
- The system remains oblivious to the restored power
- System needs to be manually power cycled for a duration long enough
to drain the capacitors
With this series, such systems can configure the kernel with
hw_protection=reboot to have the boot firmware worry about critical
conditions.
This patch (of 12):
Currently __hw_protection_shutdown() either reboots or shuts down the
system according to its shutdown argument.
To make the logic easier to follow, both inside __hw_protection_shutdown
and at caller sites, lets replace the bool parameter with an enum.
This will be extra useful, when in a later commit, a third action is added
to the enumeration.
No functional change.
Link: https://lkml.kernel.org/r/20250217-hw_protection-reboot-v3-0-e1c09b090c0c@pengutronix.de Link: https://lkml.kernel.org/r/20250217-hw_protection-reboot-v3-1-e1c09b090c0c@pengutronix.de Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Cc: Benson Leung <bleung@chromium.org> Cc: Mark Brown <broonie@kernel.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Guenter Roeck <groeck@chromium.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Matteo Croce <teknoraver@meta.com> Cc: Matti Vaittinen <mazziesaccount@gmail.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Rui Zhang <rui.zhang@intel.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: "Serge E. Hallyn" <serge@hallyn.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Thu, 13 Feb 2025 21:45:31 +0000 (21:45 +0000)]
ocfs2: remove reference to bh->b_page
Buffer heads are attached to folios, not to pages. Also
flush_dcache_page() is now deprecated in favour of flush_dcache_folio().
Link: https://lkml.kernel.org/r/20250213214533.2242224-2-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Mark Tinguely <mark.tinguely@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Thu, 13 Feb 2025 21:45:30 +0000 (21:45 +0000)]
ocfs2: use memcpy_to_folio() in ocfs2_symlink_get_block()
Replace use of kmap_atomic() with the higher-level construct
memcpy_to_folio(). This removes a use of b_page and supports large folios
as well as being easier to understand. It also removes the check for
kmap_atomic() failing (because it can't).
Link: https://lkml.kernel.org/r/20250213214533.2242224-1-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Tinguely <mark.tinguely@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sebastian Andrzej Siewior [Mon, 3 Feb 2025 15:05:25 +0000 (16:05 +0100)]
ucount: use rcuref_t for reference counting
Use rcuref_t for reference counting. This eliminates the cmpxchg loop in
the get and put path. This also eliminates the need to acquire the lock
in the put path because once the final user returns the reference, it can
no longer be obtained anymore.
Use rcuref_t for reference counting.
Link: https://lkml.kernel.org/r/20250203150525.456525-5-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Lai jiangshan <jiangshanlai@gmail.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Mengen Sun <mengensun@tencent.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Cc: YueHong Wu <yuehongwu@tencent.com> Cc: Zqiang <qiang.zhang1211@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sebastian Andrzej Siewior [Mon, 3 Feb 2025 15:05:24 +0000 (16:05 +0100)]
ucount: use RCU for ucounts lookups
The ucounts element is looked up under ucounts_lock. This can be
optimized by using RCU for a lockless lookup and return and element if the
reference can be obtained.
Replace hlist_head with hlist_nulls_head which is RCU compatible. Let
find_ucounts() search for the required item within a RCU section and
return the item if a reference could be obtained. This means
alloc_ucounts() will always return an element (unless the memory
allocation failed). Let put_ucounts() RCU free the element if the
reference counter dropped to zero.
Link: https://lkml.kernel.org/r/20250203150525.456525-4-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Lai jiangshan <jiangshanlai@gmail.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Mengen Sun <mengensun@tencent.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Cc: YueHong Wu <yuehongwu@tencent.com> Cc: Zqiang <qiang.zhang1211@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sebastian Andrzej Siewior [Mon, 3 Feb 2025 15:05:23 +0000 (16:05 +0100)]
ucount: replace get_ucounts_or_wrap() with atomic_inc_not_zero()
get_ucounts_or_wrap() increments the counter and if the counter is
negative then it decrements it again in order to reset the previous
increment. This statement can be replaced with atomic_inc_not_zero() to
only increment the counter if it is not yet 0.
This simplifies the get function because the put (if the get failed) can
be removed. atomic_inc_not_zero() is implement as a cmpxchg() loop which
can be repeated several times if another get/put is performed in parallel.
This will be optimized later.
Increment the reference counter only if not yet dropped to zero.
Link: https://lkml.kernel.org/r/20250203150525.456525-3-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Lai jiangshan <jiangshanlai@gmail.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Mengen Sun <mengensun@tencent.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Cc: YueHong Wu <yuehongwu@tencent.com> Cc: Zqiang <qiang.zhang1211@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sebastian Andrzej Siewior [Mon, 3 Feb 2025 15:05:22 +0000 (16:05 +0100)]
rcu: provide a static initializer for hlist_nulls_head
Patch series "ucount: Simplify refcounting with rcuref_t".
I noticed that the atomic_dec_and_lock_irqsave() in put_ucounts() loops
sometimes even during boot. Something like 2-3 iterations but still.
This series replaces the refcounting with rcuref_t and adds a RCU lookup.
This allows a lockless lookup in alloc_ucounts() if the entry is available
and a cmpxchg()less put of the item.
This patch (of 4):
Provide a static initializer for hlist_nulls_head so that it can be used
in statically defined data structures.
Link: https://lkml.kernel.org/r/20250203150525.456525-1-bigeasy@linutronix.de Link: https://lkml.kernel.org/r/20250203150525.456525-2-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Lai jiangshan <jiangshanlai@gmail.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Mengen Sun <mengensun@tencent.com> Cc: "Paul E . McKenney" <paulmck@kernel.org> Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Cc: YueHong Wu <yuehongwu@tencent.com> Cc: Zqiang <qiang.zhang1211@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yury Norov [Wed, 5 Feb 2025 21:29:32 +0000 (16:29 -0500)]
lib/zlib: drop EQUAL macro
The macro is prehistoric, and only exists to help those readers who don't
know what memcmp() returns if memory areas differ. This is pretty well
documented, so the macro looks excessive.
Now that the only user of the macro depends on DEBUG_ZLIB config, GCC
warns about unused macro if the library is built with W=2 against
defconfig. So drop it for good.
Vlastimil Babka [Mon, 3 Feb 2025 11:13:16 +0000 (12:13 +0100)]
get_maintainer: add --substatus for reporting subsystem status
Patch series "get_maintainer: report subsystem status separately", v2.
The subsystem status (S: field) can inform a patch submitter if the
subsystem is well maintained or e.g. maintainers are missing. In
get_maintainer, it is currently reported with --role(stats) by adjusting
the maintainer role for any status different from Maintained. This has
two downsides:
- if a subsystem has only reviewers or mailing lists and no maintainers,
the status is not reported. For example Orphan subsystems typically
have no maintainers so there's nobody to report as orphan minder.
- the Supported status means that someone is paid for maintaining, but
it is reported as "supporter" for all the maintainers, which can be
incorrect (only some of them may be paid). People (including myself)
have been also confused about what "supporter" means.
The second point has been brought up in 2022 and the discussion in the end
resulted in adjusting documentation only [1]. I however agree with Ted's
points that it's misleading to take the subsystem status and apply it to
all maintainers [2].
The attempt to modify get_maintainer output was retracted after Joe
objected that the status becomes not reported at all [3]. This series
addresses that concern by reporting the status (unless it's the most
common Maintained one) on separate lines that follow the reported emails,
using a new --substatus parameter. Care is taken to reduce the noise to
minimum by not reporting the most common Maintained status, by default
require no opt-in that would need the users to discover the new parameter,
and at the same time not to break existing git --cc-cmd usage.
The subsystem status is currently reported with --role(stats) by adjusting
the maintainer role for any status different from Maintained. This has
two downsides:
- if a subsystem has only reviewers or mailing lists and no maintainers,
the status is not reported (i.e. typically, Orphan subsystems have no
maintainers)
- the Supported status means that someone is paid for maintaining, but
it is reported as "supporter" for all the maintainers, which can be
incorrect. People have been also confused about what "supporter"
means.
This patch introduces a new --substatus option and functionality aimed to
report the subsystem status separately, without adjusting the reported
maintainer role. After the e-mails are output, the status of subsystems
will follow, for example:
Sourabh Jain [Fri, 31 Jan 2025 11:38:30 +0000 (17:08 +0530)]
powerpc/crash: use generic crashkernel reservation
Commit 0ab97169aa05 ("crash_core: add generic function to do reservation")
added a generic function to reserve crashkernel memory. So let's use the
same function on powerpc and remove the architecture-specific code that
essentially does the same thing.
The generic crashkernel reservation also provides a way to split the
crashkernel reservation into high and low memory reservations, which can
be enabled for powerpc in the future.
Along with moving to the generic crashkernel reservation, the code related
to finding the base address for the crashkernel has been separated into
its own function name get_crash_base() for better readability and
maintainability.
Link: https://lkml.kernel.org/r/20250131113830.925179-8-sourabhjain@linux.ibm.com Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com> Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Cc: Baoquan he <bhe@redhat.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sourabh Jain [Fri, 31 Jan 2025 11:38:29 +0000 (17:08 +0530)]
powerpc: insert System RAM resource to prevent crashkernel conflict
The next patch in the series with title "powerpc/crash: use generic
crashkernel reservation" enables powerpc to use generic crashkernel
reservation instead of custom implementation. This leads to exporting of
`Crash Kernel` memory to iomem_resource (/proc/iomem) via
insert_crashkernel_resources():kernel/crash_reserve.c or at another place
in the same file if HAVE_ARCH_ADD_CRASH_RES_TO_IOMEM_EARLY is set.
The add_system_ram_resources():arch/powerpc/mm/mem.c adds `System RAM` to
iomem_resource using request_resource(). This creates a conflict with
`Crash Kernel`, which is added by the generic crashkernel reservation
code. As a result, the kernel ultimately fails to add `System RAM` to
iomem_resource. Consequently, it does not appear in /proc/iomem.
There are multiple approches tried to avoid this:
1. Don't add Crash Kernel to iomem_resource:
- This has two issues.
First, it requires adding an architecture-specific hook in the
generic code. There are already two code paths to choose when to
add `Crash Kernel` to iomem_resource. This adds one more code path
to skip it.
Second, what if `Crash Kernel` is required in /proc/iomem in the
future? Many architectures do export it.
2. Don't add `System RAM` to iomem_resource by reverting commit c40dd2f766440 ("powerpc: Add System RAM to /proc/iomem"):
- It's not ideal to export `System RAM` via /proc/iomem, but since
it already done ealier and userspace tools like kdump and
kdump-utils rely on `System RAM` from /proc/iomem, removing it
will break userspace.
3. Add Crash Kernel along with System RAM to /proc/iomem:
This patch takes the third approach by updating add_system_ram_resources()
to use insert_resource() instead of the request_resource() API to add the
`System RAM` resource to iomem_resource. insert_resource() allows
inserting resources even if they overlap with existing ones. Since `Crash
Kernel` and `System RAM` resources are added to iomem_resource early in
the boot, any other conflict is not expected.
With the changes introduced here and in the next patch, "powerpc/crash:
use generic crashkernel reservation," /proc/iomem now exports `System RAM`
and `Crash Kernel` as shown below:
Commit 59d58189f3d9 ("crash: fix crash memory reserve exceed system memory
bug") fails crashkernel parsing if the crash size is found to be higher
than system RAM, which makes the memory_limit adjustment code ineffective
due to an early exit from reserve_crashkernel().
Regardless lets not violate the user-specified memory limit by adjusting
it. Remove this adjustment to ensure all reservations stay within the
limit. Commit f94f5ac07983 ("powerpc/fadump: Don't update the
user-specified memory limit") did the same for fadump.
Link: https://lkml.kernel.org/r/20250131113830.925179-6-sourabhjain@linux.ibm.com Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com> Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Cc: Baoquan he <bhe@redhat.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sourabh Jain [Fri, 31 Jan 2025 11:38:27 +0000 (17:08 +0530)]
powerpc/crash: use generic APIs to locate memory hole for kdump
On PowerPC, the memory reserved for the crashkernel can contain components
like RTAS, TCE, OPAL, etc., which should be avoided when loading kexec
segments into crashkernel memory. Due to these special components,
PowerPC has its own set of APIs to locate holes in the crashkernel memory
for loading kexec segments for kdump. However, for loading kexec segments
in the kexec case, PowerPC already uses generic APIs to locate holes.
The previous patch in this series, titled "crash: Let arch decide usable
memory range in reserved area," introduced arch-specific hook to handle
such special regions in the crashkernel area. So, switch PowerPC to use
the generic APIs to locate memory holes for kdump and remove the redundant
PowerPC-specific APIs.
Link: https://lkml.kernel.org/r/20250131113830.925179-5-sourabhjain@linux.ibm.com Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com> Cc: Baoquan he <bhe@redhat.com> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sourabh Jain [Fri, 31 Jan 2025 11:38:26 +0000 (17:08 +0530)]
crash: let arch decide usable memory range in reserved area
Although the crashkernel area is reserved, on architectures like PowerPC,
it is possible for the crashkernel reserved area to contain components
like RTAS, TCE, OPAL, etc. To avoid placing kexec segments over these
components, PowerPC has its own set of APIs to locate holes in the
crashkernel reserved area.
Add an arch hook in the generic locate mem hole APIs so that architectures
can handle such special regions in the crashkernel area while locating
memory holes for kexec segments using generic APIs. With this, a lot of
redundant arch-specific code can be removed, as it performs the exact same
job as the generic APIs.
To keep the generic and arch-specific changes separate, the changes
related to moving PowerPC to use the generic APIs and the removal of
PowerPC-specific APIs for memory hole allocation are done in a subsequent
patch titled "powerpc/crash: Use generic APIs to locate memory hole for
kdump.
Link: https://lkml.kernel.org/r/20250131113830.925179-4-sourabhjain@linux.ibm.com Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sourabh Jain [Fri, 31 Jan 2025 11:38:24 +0000 (17:08 +0530)]
kexec: initialize ELF lowest address to ULONG_MAX
Patch series "powerpc/crash: use generic crashkernel reservation", v3.
Commit 0ab97169aa05 ("crash_core: add generic function to do reservation")
added a generic function to reserve crashkernel memory. So let's use the
same function on powerpc and remove the architecture-specific code that
essentially does the same thing.
The generic crashkernel reservation also provides a way to split the
crashkernel reservation into high and low memory reservations, which can
be enabled for powerpc in the future.
Additionally move powerpc to use generic APIs to locate memory hole for
kexec segments while loading kdump kernel.
This patch (of 7):
kexec_elf_load() loads an ELF executable and sets the address of the
lowest PT_LOAD section to the address held by the lowest_load_addr
function argument.
To determine the lowest PT_LOAD address, a local variable lowest_addr
(type unsigned long) is initialized to UINT_MAX. After loading each
PT_LOAD, its address is compared to lowest_addr. If a loaded PT_LOAD
address is lower, lowest_addr is updated. However, setting lowest_addr to
UINT_MAX won't work when the kernel image is loaded above 4G, as the
returned lowest PT_LOAD address would be invalid. This is resolved by
initializing lowest_addr to ULONG_MAX instead.
This issue was discovered while implementing crashkernel high/low
reservation on the PowerPC architecture.
I Hsin Cheng [Sun, 19 Jan 2025 06:24:08 +0000 (14:24 +0800)]
lib/plist.c: add shortcut for plist_requeue()
In the operation of plist_requeue(), "node" is deleted from the list
before queueing it back to the list again, which involves looping to find
the tail of same-prio entries.
If "node" is the head of same-prio entries which means its prio_list is on
the priority list, then "node_next" can be retrieve immediately by the
next entry of prio_list, instead of looping nodes on node_list.
The shortcut implementation can benefit plist_requeue() running the below
test, and the test result is shown in the following table.
One can observe from the test result that when the number of nodes of
same-prio entries is smaller, then the probability of hitting the shortcut
can be bigger, thus the benefit can be more significant.
While it tends to behave almost the same for long same-prio entries, since
the probability of taking the shortcut is much smaller.
The test is done on x86_64 architecture with v6.9 kernel and
Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz.
Test script( executed in kernel module mode ):
int init_module(void)
{
unsigned int test_data[test_size];
/* Split the list into 10 different priority
* , when test_size is larger, the number of
* nodes within each priority is larger.
*/
for (i = 0; i < ARRAY_SIZE(test_data); i++) {
test_data[i] = i % 10;
}
for (i = 0; i < ARRAY_SIZE(test_node_local); i++) {
plist_node_init(test_node_local + i, 0);
test_node_local[i].prio = test_data[i];
}
for (i = 0; i < ARRAY_SIZE(test_node_local); i++) {
if (plist_node_empty(test_node_local + i)) {
plist_add(test_node_local + i, &test_head_local);
}
}
for (i = 0; i < ARRAY_SIZE(test_node_local); i += 1) {
start = ktime_get();
plist_requeue(test_node_local + i, &test_head_local);
end = ktime_get();
time_elapsed += (end - start);
}
Add a paragraph explaining what sort of capabilities a process would need
to read procfs data for some other process. Also mention that reading
data for its own process doesn't require any extra permissions.
Guilherme G. Piccoli [Mon, 20 Jan 2025 19:04:26 +0000 (16:04 -0300)]
scripts: add script to extract built-in firmware blobs
There is currently no tool to extract a firmware blob that is built-in
on vmlinux to the best of my knowledge. So if we have a kernel image
containing the blobs, and we want to rebuild the kernel with some debug
patches for example (and given that the image also has IKCONFIG=y), we
currently can't do that for the same versions for all the firmware
blobs, _unless_ we have exact commits of linux-firmware for the
specific versions for each firmware included.
Through the options CONFIG_EXTRA_FIRMWARE{_DIR} one is able to build a
kernel including firmware blobs in a built-in fashion. This is usually
the case of built-in drivers that require some blobs in order to work
properly, for example, like in non-initrd based systems.
Add hereby a script to extract these blobs from a non-stripped vmlinux,
similar to the idea of "extract-ikconfig". The firmware loader interface
saves such built-in blobs as rodata entries, having a field for the FW
name as "_fw_<module_name>_<firmware_name>_bin"; the tool extracts files
named "<module_name>_<firmware_name>" for each rodata firmware entry
detected. It makes use of awk, bash, dd and readelf, pretty standard
tooling for Linux development.
With this tool, we can blindly extract the FWs and easily re-add them
in the new debug kernel build, allowing a more deterministic testing
without the burden of "hunting down" the proper version of each
firmware binary.
Link: https://lkml.kernel.org/r/20250120190436.127578-1-gpiccoli@igalia.com Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Suggested-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Reviewed-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Luis Chamberalin <mcgrof@kernel.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nicolas Schier <nicolas@fjasle.eu> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Russ Weight <russ.weight@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yang Yang [Fri, 17 Jan 2025 14:20:13 +0000 (22:20 +0800)]
MAINTAINERS: add Yang Yang as a co-maintainer of PER-TASK DELAY ACCOUNTING
Balbir Singh is the unique maintainer of PER-TASK DELAY ACCOUNTING, and he
had started work on cgroupstats a long time back, this subsystem then is
not growing at a very rapid pace. With their excellent work delay
accounting is still very useful for observing and optimizing system delay,
but still needs continuous improvement. Yang Yang with his team had
worked for most of the recent patches of the subsystem, and he has a
strong willing to help, Balbir Singh is glad to see that, so add him as a
co-maintainer.
Andrii Nakryiko [Mon, 27 Jan 2025 22:21:14 +0000 (14:21 -0800)]
mm,procfs: allow read-only remote mm access under CAP_PERFMON
It's very common for various tracing and profiling toolis to need to
access /proc/PID/maps contents for stack symbolization needs to learn
which shared libraries are mapped in memory, at which file offset, etc.
Currently, access to /proc/PID/maps requires CAP_SYS_PTRACE (unless we are
looking at data for our own process, which is a trivial case not too
relevant for profilers use cases).
Unfortunately, CAP_SYS_PTRACE implies way more than just ability to
discover memory layout of another process: it allows to fully control
arbitrary other processes. This is problematic from security POV for
applications that only need read-only /proc/PID/maps (and other similar
read-only data) access, and in large production settings CAP_SYS_PTRACE is
frowned upon even for the system-wide profilers.
On the other hand, it's already possible to access similar kind of
information (and more) with just CAP_PERFMON capability. E.g., setting up
PERF_RECORD_MMAP collection through perf_event_open() would give one
similar information to what /proc/PID/maps provides.
CAP_PERFMON, together with CAP_BPF, is already a very common combination
for system-wide profiling and observability application. As such, it's
reasonable and convenient to be able to access /proc/PID/maps with
CAP_PERFMON capabilities instead of CAP_SYS_PTRACE.
For procfs, these permissions are checked through common mm_access()
helper, and so we augment that with cap_perfmon() check *only* if
requested mode is PTRACE_MODE_READ. I.e., PTRACE_MODE_ATTACH wouldn't be
permitted by CAP_PERFMON. So /proc/PID/mem, which uses
PTRACE_MODE_ATTACH, won't be permitted by CAP_PERFMON, but /proc/PID/maps,
/proc/PID/environ, and a bunch of other read-only contents will be
allowable under CAP_PERFMON.
Besides procfs itself, mm_access() is used by process_madvise() and
process_vm_{readv,writev}() syscalls. The former one uses
PTRACE_MODE_READ to avoid leaking ASLR metadata, and as such CAP_PERFMON
seems like a meaningful allowable capability as well.
process_vm_{readv,writev} currently assume PTRACE_MODE_ATTACH level of
permissions (though for readv PTRACE_MODE_READ seems more reasonable, but
that's outside the scope of this change), and as such won't be affected by
this patch.
Linus Torvalds [Sun, 9 Mar 2025 19:23:14 +0000 (09:23 -1000)]
Merge tag 'kbuild-fixes-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Use the specified $(LD) when building userprogs with Clang
- Pass the correct target triple when compile-testing UAPI headers
with Clang
- Fix pacman-pkg build error with KBUILD_OUTPUT
* tag 'kbuild-fixes-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: install-extmod-build: Fix build when specifying KBUILD_OUTPUT
docs: Kconfig: fix defconfig description
kbuild: hdrcheck: fix cross build with clang
kbuild: userprogs: use correct lld when linking through clang
Linus Torvalds [Sun, 9 Mar 2025 19:14:07 +0000 (09:14 -1000)]
Merge tag 'usb-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for some reported issues. These
contain:
- typec driver fixes
- dwc3 driver fixes
- xhci driver fixes
- renesas controller fixes
- gadget driver fixes
- a new USB quirk added
All of these have been in linux-next with no reported issues"
* tag 'usb-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix NULL pointer access
usb: quirks: Add DELAY_INIT and NO_LPM for Prolific Mass Storage Card Reader
usb: xhci: Fix host controllers "dying" after suspend and resume
usb: dwc3: Set SUSPENDENABLE soon after phy init
usb: hub: lack of clearing xHC resources
usb: renesas_usbhs: Flush the notify_hotplug_work
usb: renesas_usbhs: Use devm_usb_get_phy()
usb: renesas_usbhs: Call clk_put()
usb: dwc3: gadget: Prevent irq storm when TH re-executes
usb: gadget: Check bmAttributes only if configuration is valid
xhci: Restrict USB4 tunnel detection for USB3 devices to Intel hosts
usb: xhci: Enable the TRB overfetch quirk on VIA VL805
usb: gadget: Fix setting self-powered state on suspend
usb: typec: ucsi: increase timeout for PPM reset operations
acpi: typec: ucsi: Introduce a ->poll_cci method
usb: typec: tcpci_rt1711h: Unmask alert interrupts to fix functionality
usb: gadget: Set self-powered based on MaxPower and bmAttributes
usb: gadget: u_ether: Set is_suspend flag if remote wakeup fails
usb: atm: cxacru: fix a flaw in existing endpoint checks
Linus Torvalds [Sun, 9 Mar 2025 19:11:42 +0000 (09:11 -1000)]
Merge tag 'driver-core-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here is a single driver core fix that resolves a reported memory leak.
It's been in linux-next for 2 weeks now with no reported problems"
* tag 'driver-core-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: core: fix device leak in __fw_devlink_relax_cycles()
Linus Torvalds [Sun, 9 Mar 2025 19:07:54 +0000 (09:07 -1000)]
Merge tag 'char-misc-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver fixes from Greg KH:
"Here are a number of misc and char and iio driver fixes that have been
sitting in my tree for way too long. They contain:
- iio driver fixes for reported issues
- regression fix for rtsx_usb card reader
- mei and mhi driver fixes
- small virt driver fixes
- ntsync permissions fix
- other tiny driver fixes for reported problems.
All of these have been in linux-next for quite a while with no
reported issues"
* tag 'char-misc-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (30 commits)
Revert "drivers/card_reader/rtsx_usb: Restore interrupt based detection"
ntsync: Check wait count based on byte size.
bus: simple-pm-bus: fix forced runtime PM use
char: misc: deallocate static minor in error path
eeprom: digsy_mtc: Make GPIO lookup table match the device
drivers: virt: acrn: hsm: Use kzalloc to avoid info leak in pmcmd_ioctl
binderfs: fix use-after-free in binder_devices
slimbus: messaging: Free transaction ID in delayed interrupt scenario
vbox: add HAS_IOPORT dependency
cdx: Fix possible UAF error in driver_override_show()
intel_th: pci: Add Panther Lake-P/U support
intel_th: pci: Add Panther Lake-H support
intel_th: pci: Add Arrow Lake support
intel_th: msu: Fix less trivial kernel-doc warnings
intel_th: msu: Fix kernel-doc warnings
MAINTAINERS: change maintainer for FSI
ntsync: Set the permissions to be 0666
bus: mhi: host: pci_generic: Use pci_try_reset_function() to avoid deadlock
mei: vsc: Use "wakeuphostint" when getting the host wakeup GPIO
mei: me: add panther lake P DID
...
Linus Torvalds [Sun, 9 Mar 2025 19:04:08 +0000 (09:04 -1000)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"arm64:
- Fix a couple of bugs affecting pKVM's PSCI relay implementation
when running in the hVHE mode, resulting in the host being entered
with the MMU in an unknown state, and EL2 being in the wrong mode
x86:
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow
- Ensure DEBUGCTL is context switched on AMD to avoid running the
guest with the host's value, which can lead to unexpected bus lock
#DBs
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't
properly emulate BTF. KVM's lack of context switching has meant BTF
has always been broken to some extent
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as
the guest can enable DebugSwap without KVM's knowledge
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes
to RO memory" phase without actually generating a write-protection
fault
- Fix a printf() goof in the SEV smoke test that causes build
failures with -Werror
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when
PERFMON_V2 isn't supported by KVM"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Explicitly zero EAX and EBX when PERFMON_V2 isn't supported by KVM
KVM: selftests: Fix printf() format goof in SEV smoke test
KVM: selftests: Ensure all vCPUs hit -EFAULT during initial RO stage
KVM: SVM: Don't rely on DebugSwap to restore host DR0..DR3
KVM: SVM: Save host DR masks on CPUs with DebugSwap
KVM: arm64: Initialize SCTLR_EL1 in __kvm_hyp_init_cpu()
KVM: arm64: Initialize HCR_EL2.E2H early
KVM: x86: Snapshot the host's DEBUGCTL after disabling IRQs
KVM: SVM: Manually context switch DEBUGCTL if LBR virtualization is disabled
KVM: x86: Snapshot the host's DEBUGCTL in common x86
KVM: SVM: Suppress DEBUGCTL.BTF on AMD
KVM: SVM: Drop DEBUGCTL[5:2] from guest's effective value
KVM: selftests: Assert that STI blocking isn't set after event injection
KVM: SVM: Set RFLAGS.IF=1 in C code, to get VMRUN out of the STI shadow
Paolo Bonzini [Sun, 9 Mar 2025 07:44:06 +0000 (03:44 -0400)]
Merge tag 'kvm-x86-fixes-6.14-rcN.2' of https://github.com/kvm-x86/linux into HEAD
KVM x86 fixes for 6.14-rcN #2
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow.
- Ensure DEBUGCTL is context switched on AMD to avoid running the guest with
the host's value, which can lead to unexpected bus lock #DBs.
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly
emulate BTF. KVM's lack of context switching has meant BTF has always been
broken to some extent.
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest
can enable DebugSwap without KVM's knowledge.
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO
memory" phase without actually generating a write-protection fault.
- Fix a printf() goof in the SEV smoke test that causes build failures with
-Werror.
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2
isn't supported by KVM.
Paolo Bonzini [Sun, 9 Mar 2025 07:43:56 +0000 (03:43 -0400)]
Merge tag 'kvmarm-fixes-6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.14, take #4
- Fix a couple of bugs affecting pKVM's PSCI relay implementation
when running in the hVHE mode, resulting in the host being entered
with the MMU in an unknown state, and EL2 being in the wrong mode.
Linus Torvalds [Sun, 9 Mar 2025 00:34:06 +0000 (14:34 -1000)]
Merge tag 'mm-hotfixes-stable-2025-03-08-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"33 hotfixes. 24 are cc:stable and the remainder address post-6.13
issues or aren't considered necessary for -stable kernels.
26 are for MM and 7 are for non-MM.
- "mm: memory_failure: unmap poisoned folio during migrate properly"
from Ma Wupeng fixes a couple of two year old bugs involving the
migration of hwpoisoned folios.
- "selftests/damon: three fixes for false results" from SeongJae Park
fixes three one year old bugs in the SAMON selftest code.
The remainder are singletons and doubletons. Please see the individual
changelogs for details"
* tag 'mm-hotfixes-stable-2025-03-08-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (33 commits)
mm/page_alloc: fix uninitialized variable
rapidio: add check for rio_add_net() in rio_scan_alloc_net()
rapidio: fix an API misues when rio_add_net() fails
MAINTAINERS: .mailmap: update Sumit Garg's email address
Revert "mm/page_alloc.c: don't show protection in zone's ->lowmem_reserve[] for empty zone"
mm: fix finish_fault() handling for large folios
mm: don't skip arch_sync_kernel_mappings() in error paths
mm: shmem: remove unnecessary warning in shmem_writepage()
userfaultfd: fix PTE unmapping stack-allocated PTE copies
userfaultfd: do not block on locking a large folio with raised refcount
mm: zswap: use ATOMIC_LONG_INIT to initialize zswap_stored_pages
mm: shmem: fix potential data corruption during shmem swapin
mm: fix kernel BUG when userfaultfd_move encounters swapcache
selftests/damon/damon_nr_regions: sort collected regiosn before checking with min/max boundaries
selftests/damon/damon_nr_regions: set ops update for merge results check to 100ms
selftests/damon/damos_quota: make real expectation of quota exceeds
include/linux/log2.h: mark is_power_of_2() with __always_inline
NFS: fix nfs_release_folio() to not deadlock via kcompactd writeback
mm, swap: avoid BUG_ON in relocate_cluster()
mm: swap: use correct step in loop to wait all clusters in wait_for_allocation()
...
Linus Torvalds [Sat, 8 Mar 2025 19:29:54 +0000 (09:29 -1000)]
Merge tag 'x86-urgent-2025-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more x86 fixes from Ingo Molnar:
- Add more model IDs to the AMD microcode version check, more people
are hitting these checks
- Fix a Xen guest boot warning related to AMD northbridge setup
- Fix SEV guest bugs related to a recent changes in its locking logic
- Fix a missing definition of PTRS_PER_PMD that assembly builds can hit
* tag 'x86-urgent-2025-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Add some forgotten models to the SHA check
x86/mm: Define PTRS_PER_PMD for assembly code too
virt: sev-guest: Move SNP Guest Request data pages handling under snp_cmd_mutex
virt: sev-guest: Allocate request data dynamically
x86/amd_nb: Use rdmsr_safe() in amd_get_mmconfig_range()
Linus Torvalds [Sat, 8 Mar 2025 17:21:41 +0000 (07:21 -1000)]
Merge tag 'loongarch-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix bugs in kernel build, hibernation, memory management and KVM"
* tag 'loongarch-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Fix GPA size issue about VM
LoongArch: KVM: Reload guest CSR registers after sleep
LoongArch: KVM: Add interrupt checking for AVEC
LoongArch: Set hugetlb mmap base address aligned with pmd size
LoongArch: Set max_pfn with the PFN of the last page
LoongArch: Use polling play_dead() when resuming from hibernation
LoongArch: Eliminate superfluous get_numa_distances_cnt()
LoongArch: Convert unreachable() to BUG()
Bibo Mao [Sat, 8 Mar 2025 05:52:04 +0000 (13:52 +0800)]
LoongArch: KVM: Fix GPA size issue about VM
Physical address space is 48 bit on Loongson-3A5000 physical machine,
however it is 47 bit for VM on Loongson-3A5000 system. Size of physical
address space of VM is the same with the size of virtual user space (a
half) of physical machine.
Variable cpu_vabits represents user address space, kernel address space
is not included (user space and kernel space are both a half of total).
Here cpu_vabits, rather than cpu_vabits - 1, is to represent the size of
guest physical address space.
Also there is strict checking about page fault GPA address, inject error
if it is larger than maximum GPA address of VM.
Cc: stable@vger.kernel.org Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Bibo Mao [Sat, 8 Mar 2025 05:52:01 +0000 (13:52 +0800)]
LoongArch: KVM: Reload guest CSR registers after sleep
On host, the HW guest CSR registers are lost after suspend and resume
operation. Since last_vcpu of boot CPU still records latest vCPU pointer
so that the guest CSR register skips to reload when boot CPU resumes and
vCPU is scheduled.
Here last_vcpu is cleared so that guest CSR registers will reload from
scheduled vCPU context after suspend and resume.
Cc: stable@vger.kernel.org Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Bibo Mao [Sat, 8 Mar 2025 05:51:59 +0000 (13:51 +0800)]
LoongArch: KVM: Add interrupt checking for AVEC
There is a newly added macro INT_AVEC with CSR ESTAT register, which is
bit 14 used for LoongArch AVEC support. AVEC interrupt status bit 14 is
supported with macro CSR_ESTAT_IS, so here replace the hard-coded value
0x1fff with macro CSR_ESTAT_IS so that the AVEC interrupt status is also
supported by KVM.
Cc: stable@vger.kernel.org Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The problem is that base address allocated from hugetlbfs is not aligned
with pmd size. Here add a checking for hugetlbfs and align base address
with pmd size. After this patch the test case "testcases/bin/hugefork02"
passes to run.
This is similar to the commit 7f24cbc9c4d42db8a3c8484d1 ("mm/mmap: teach
generic_get_unmapped_area{_topdown} to handle hugetlb mappings").
Bibo Mao [Sat, 8 Mar 2025 05:51:32 +0000 (13:51 +0800)]
LoongArch: Set max_pfn with the PFN of the last page
The current max_pfn equals to zero. In this case, it causes user cannot
get some page information through /proc filesystem such as kpagecount.
The following message is displayed by stress-ng test suite with command
"stress-ng --verbose --physpage 1 -t 1".
# stress-ng --verbose --physpage 1 -t 1
stress-ng: error: [1691] physpage: cannot read page count for address 0x134ac000 in /proc/kpagecount, errno=22 (Invalid argument)
stress-ng: error: [1691] physpage: cannot read page count for address 0x7ffff207c3a8 in /proc/kpagecount, errno=22 (Invalid argument)
stress-ng: error: [1691] physpage: cannot read page count for address 0x134b0000 in /proc/kpagecount, errno=22 (Invalid argument)
...
After applying this patch, the kernel can pass the test.
# stress-ng --verbose --physpage 1 -t 1
stress-ng: debug: [1701] physpage: [1701] started (instance 0 on CPU 3)
stress-ng: debug: [1701] physpage: [1701] exited (instance 0 on CPU 3)
stress-ng: debug: [1700] physpage: [1701] terminated (success)
Cc: stable@vger.kernel.org # 6.8+ Fixes: ff6c3d81f2e8 ("NUMA: optimize detection of memory with no node id assigned by firmware") Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Huacai Chen [Sat, 8 Mar 2025 05:51:32 +0000 (13:51 +0800)]
LoongArch: Use polling play_dead() when resuming from hibernation
When CONFIG_RANDOM_KMALLOC_CACHES or other randomization infrastructrue
enabled, the idle_task's stack may different between the booting kernel
and target kernel. So when resuming from hibernation, an ACTION_BOOT_CPU
IPI wakeup the idle instruction in arch_cpu_idle_dead() and jump to the
interrupt handler. But since the stack pointer is changed, the interrupt
handler cannot restore correct context.
So rename the current arch_cpu_idle_dead() to idle_play_dead(), make it
as the default version of play_dead(), and the new arch_cpu_idle_dead()
call play_dead() directly. For hibernation, implement an arch-specific
hibernate_resume_nonboot_cpu_disable() to use the polling version (idle
instruction is replace by nop, and irq is disabled) of play_dead(), i.e.
poll_play_dead(), to avoid IPI handler corrupting the idle_task's stack
when resuming from hibernation.
This solution is a little similar to commit 406f992e4a372dafbe3c ("x86 /
hibernate: Use hlt_play_dead() when resuming from hibernation").
Tiezhu Yang [Sat, 8 Mar 2025 05:50:45 +0000 (13:50 +0800)]
LoongArch: Convert unreachable() to BUG()
When compiling on LoongArch, there exists the following objtool warning
in arch/loongarch/kernel/machine_kexec.o:
kexec_reboot() falls through to next function crash_shutdown_secondary()
Avoid using unreachable() as it can (and will in the absence of UBSAN)
generate fall-through code. Use BUG() so we get a "break BRK_BUG" trap
(with unreachable annotation).
Linus Torvalds [Sat, 8 Mar 2025 02:21:02 +0000 (16:21 -1000)]
Merge tag 's390-6.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix return address recovery of traced function in ftrace to ensure
reliable stack unwinding
- Fix compiler warnings and runtime crashes of vDSO selftests on s390
by introducing a dedicated GNU hash bucket pointer with correct
32-bit entry size
- Fix test_monitor_call() inline asm, which misses CC clobber, by
switching to an instruction that doesn't modify CC
* tag 's390-6.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ftrace: Fix return address recovery of traced function
selftests/vDSO: Fix GNU hash table entry size for s390x
s390/traps: Fix test_monitor_call() inline assembly
Ingo Molnar [Thu, 6 Mar 2025 22:00:16 +0000 (23:00 +0100)]
x86/mm: Define PTRS_PER_PMD for assembly code too
Andy reported the following build warning from head_32.S:
In file included from arch/x86/kernel/head_32.S:29:
arch/x86/include/asm/pgtable_32.h:59:5: error: "PTRS_PER_PMD" is not defined, evaluates to 0 [-Werror=undef]
59 | #if PTRS_PER_PMD > 1
The reason is that on 2-level i386 paging the folded in PMD's
PTRS_PER_PMD constant is not defined in assembly headers,
only in generic MM C headers.
Instead of trying to fish out the definition from the generic
headers, just define it - it even has a comment for it already...
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/Z8oa8AUVyi2HWfo9@gmail.com
Linus Torvalds [Fri, 7 Mar 2025 22:17:42 +0000 (12:17 -1000)]
Merge tag 'acpi-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Restore the previous behavior of the ACPI platform_profile sysfs
interface that has been changed recently in a way incompatible with
the existing user space (Mario Limonciello)"
* tag 'acpi-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
platform/x86/amd: pmf: Add balanced-performance to hidden choices
platform/x86/amd: pmf: Add 'quiet' to hidden choices
ACPI: platform_profile: Add support for hidden choices
Linus Torvalds [Fri, 7 Mar 2025 21:17:30 +0000 (11:17 -1000)]
Merge tag 'for-6.14-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix leaked extent map after error when reading chunks
- replace use of deprecated strncpy
- in zoned mode, fixed range when ulocking extent range, causing a hang
* tag 'for-6.14-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix a leaked chunk map issue in read_one_chunk()
btrfs: replace deprecated strncpy() with strscpy()
btrfs: zoned: fix extent range end unlock in cow_file_range()
Linus Torvalds [Fri, 7 Mar 2025 21:12:33 +0000 (11:12 -1000)]
Merge tag 'block-6.14-20250306' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- TCP use after free fix on polling (Sagi)
- Controller memory buffer cleanup fixes (Icenowy)
- Free leaking requests on bad user passthrough commands (Keith)
- TCP error message fix (Maurizio)
- TCP corruption fix on partial PDU (Maurizio)
- TCP memory ordering fix for weakly ordered archs (Meir)
- Type coercion fix on message error for TCP (Dan)
- Name the RQF flags enum, fixing issues with anon enums and BPF import
of it
- ublk parameter setting fix
- GPT partition 7-bit conversion fix
* tag 'block-6.14-20250306' of git://git.kernel.dk/linux:
block: Name the RQF flags enum
nvme-tcp: fix signedness bug in nvme_tcp_init_connection()
block: fix conversion of GPT partition name to 7-bit
ublk: set_params: properly check if parameters can be applied
nvmet-tcp: Fix a possible sporadic response drops in weakly ordered arch
nvme-tcp: fix potential memory corruption in nvme_tcp_recv_pdu()
nvme-tcp: Fix a C2HTermReq error message
nvmet: remove old function prototype
nvme-ioctl: fix leaked requests on mapping error
nvme-pci: skip CMB blocks incompatible with PCI P2P DMA
nvme-pci: clean up CMBMSC when registering CMB fails
nvme-tcp: fix possible UAF in nvme_tcp_poll
Linus Torvalds [Fri, 7 Mar 2025 21:09:33 +0000 (11:09 -1000)]
Merge tag 'io_uring-6.14-20250306' of git://git.kernel.dk/linux
Pull io_uring fix from Jens Axboe:
"A single fix for a regression introduced in the 6.14 merge window,
causing stalls/hangs with IOPOLL reads or writes"
* tag 'io_uring-6.14-20250306' of git://git.kernel.dk/linux:
io_uring/rw: ensure reissue path is correctly handled for IOPOLL
- Fix possible memory corruption in child_cfs_rq_on_list()
* tag 'sched-urgent-2025-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/rt: Update limit of sched_rt sysctl in documentation
sched/deadline: Use online cpus for validating runtime
sched/fair: Fix potential memory corruption in child_cfs_rq_on_list
Linus Torvalds [Fri, 7 Mar 2025 20:38:33 +0000 (10:38 -1000)]
Merge tag 'perf-urgent-2025-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fixes from Ingo Molnar:
"Fix a race between PMU registration and event creation, and fix
pmus_lock vs. pmus_srcu lock ordering"
* tag 'perf-urgent-2025-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix perf_pmu_register() vs. perf_init_event()
perf/core: Fix pmus_lock vs. pmus_srcu ordering
Linus Torvalds [Fri, 7 Mar 2025 17:51:27 +0000 (07:51 -1000)]
Merge tag 'hwmon-for-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- xgene-hwmon: Fix a NULL vs IS_ERR_OR_NULL() check
- ad7314: Return error if leading zero bits are non-zero
- ntc_thermistor: Update/fix the ncpXXxh103 sensor table
- pmbus: Initialise page count in pmbus_identify()
- peci/dimmtemp: Do not provide fake threshold data
* tag 'hwmon-for-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: fix a NULL vs IS_ERR_OR_NULL() check in xgene_hwmon_probe()
hwmon: (ad7314) Validate leading zero bits and return error
hwmon: (ntc_thermistor) Fix the ncpXXxh103 sensor table
hwmon: (pmbus) Initialise page count in pmbus_identify()
hwmon: (peci/dimmtemp) Do not provide fake thresholds data
Linus Torvalds [Fri, 7 Mar 2025 17:29:13 +0000 (07:29 -1000)]
Merge tag 'platform-drivers-x86-v6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- amd/pmf:
- Initialize 'cb_mutex'
- Support for new version of PMF-TA
- intel-hid: Fix volume buttons on Microsoft Surface Go 4 tablet
- intel/vsec: Add Diamond Rapids support
- thinkpad_acpi: Add battery quirk for ThinkPad X131e
* tag 'platform-drivers-x86-v6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/amd/pmf: Update PMF Driver for Compatibility with new PMF-TA
platform/x86/amd/pmf: Propagate PMF-TA return codes
platform/x86/intel/vsec: Add Diamond Rapids support
platform/x86: thinkpad_acpi: Add battery quirk for ThinkPad X131e
platform/x86: intel-hid: fix volume buttons on Microsoft Surface Go 4 tablet
platform/x86/amd/pmf: Initialize and clean up `cb_mutex`
Linus Torvalds [Fri, 7 Mar 2025 17:24:41 +0000 (07:24 -1000)]
Merge tag 'sound-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"There is a single change in ALSA core (for sequencer code for the
module auto-loading in a wrong timing) while the all rest are various
HD- and USB-audio fixes.
Many of them are boring device-specific quirks, and should be safe to
take"
* tag 'sound-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Add support for ASUS Zenbook UM3406KA Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for ASUS B5405 and B5605 Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for ASUS B3405 and B3605 Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for various ASUS Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for ASUS ROG Strix G614 Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for ASUS ROG Strix GA603 Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for ASUS ROG Strix G814 Laptop using CS35L41 HDA
ALSA: hda: intel: Add Dell ALC3271 to power_save denylist
ALSA: hda/realtek: update ALC222 depop optimize
ALSA: hda: realtek: fix incorrect IS_REACHABLE() usage
ALSA: usx2y: validate nrpacks module parameter on probe
ALSA: hda/realtek - add supported Mic Mute LED for Lenovo platform
ALSA: seq: Avoid module auto-load handling at event delivery
ALSA: hda: Fix speakers on ASUS EXPERTBOOK P5405CSA 1.0
ALSA: hda/realtek: Fix Asus Z13 2025 audio
ALSA: hda/realtek: Remove (revert) duplicate Ally X config
Alexey Kardashevskiy [Fri, 7 Mar 2025 01:37:00 +0000 (12:37 +1100)]
virt: sev-guest: Move SNP Guest Request data pages handling under snp_cmd_mutex
Compared to the SNP Guest Request, the "Extended" version adds data pages for
receiving certificates. If not enough pages provided, the HV can report to the
VM how much is needed so the VM can reallocate and repeat.
Commit
ae596615d93d ("virt: sev-guest: Reduce the scope of SNP command mutex")
moved handling of the allocated/desired pages number out of scope of said
mutex and create a possibility for a race (multiple instances trying to
trigger Extended request in a VM) as there is just one instance of
snp_msg_desc per /dev/sev-guest and no locking other than snp_cmd_mutex.
Fix the issue by moving the data blob/size and the GHCB input struct
(snp_req_data) into snp_guest_req which is allocated on stack now and accessed
by the GHCB caller under that mutex.
Stop allocating SEV_FW_BLOB_MAX_SIZE in snp_msg_alloc() as only one of four
callers needs it. Free the received blob in get_ext_report() right after it is
copied to the userspace. Possible future users of snp_send_guest_request() are
likely to have different ideas about the buffer size anyways.
Fixes: ae596615d93d ("virt: sev-guest: Reduce the scope of SNP command mutex") Signed-off-by: Alexey Kardashevskiy <aik@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Nikunj A Dadhania <nikunj@amd.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250307013700.437505-3-aik@amd.com
Nikunj A Dadhania [Thu, 6 Mar 2025 08:17:21 +0000 (19:17 +1100)]
virt: sev-guest: Allocate request data dynamically
Commit
ae596615d93d ("virt: sev-guest: Reduce the scope of SNP command mutex")
narrowed the command mutex scope to snp_send_guest_request(). However,
GET_REPORT, GET_DERIVED_KEY, and GET_EXT_REPORT share the req structure in
snp_guest_dev. Without the mutex protection, concurrent requests can overwrite
each other's data. Fix it by dynamically allocating the request structure.
Fixes: ae596615d93d ("virt: sev-guest: Reduce the scope of SNP command mutex") Closes: https://github.com/AMDESE/AMDSEV/issues/265 Reported-by: andreas.stuehrk@yaxi.tech Signed-off-by: Nikunj A Dadhania <nikunj@amd.com> Signed-off-by: Alexey Kardashevskiy <aik@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250307013700.437505-2-aik@amd.com
Linus Torvalds [Fri, 7 Mar 2025 04:25:35 +0000 (18:25 -1000)]
fs/pipe: add simpler helpers for common cases
The fix to atomically read the pipe head and tail state when not holding
the pipe mutex has caused a number of headaches due to the size change
of the involved types.
It turns out that we don't have _that_ many places that access these
fields directly and were affected, but we have more than we strictly
should have, because our low-level helper functions have been designed
to have intimate knowledge of how the pipes work.
And as a result, that random noise of direct 'pipe->head' and
'pipe->tail' accesses makes it harder to pinpoint any actual potential
problem spots remaining.
For example, we didn't have a "is the pipe full" helper function, but
instead had a "given these pipe buffer indexes and this pipe size, is
the pipe full". That's because some low-level pipe code does actually
want that much more complicated interface.
But most other places literally just want a "is the pipe full" helper,
and not having it meant that those places ended up being unnecessarily
much too aware of this all.
It would have been much better if only the very core pipe code that
cared had been the one aware of this all.
So let's fix it - better late than never. This just introduces the
trivial wrappers for "is this pipe full or empty" and to get how many
pipe buffers are used, so that instead of writing
if (pipe_full(pipe->head, pipe->tail, pipe->max_usage))
the places that literally just want to know if a pipe is full can just
say
if (pipe_is_full(pipe))
instead. The existing trivial cases were converted with a 'sed' script.
This cuts down on the places that access pipe->head and pipe->tail
directly outside of the pipe code (and core splice code) quite a lot.
The splice code in particular still revels in doing the direct low-level
accesses, and the fuse fuse_dev_splice_write() code also seems a bit
unnecessarily eager to go very low-level, but it's at least a bit better
than it used to be.
xe:
- Remove double page flip on initial plane
- Properly setup userptr pfn_flags_mask
- Fix GT "for each engine" workarounds
- Fix userptr races and missed validations
- Userptr invalid page access fixes
- Cleanup some style nits
amdgpu:
- Fix NULL check in DC code
- SMU 14 fix
amdkfd:
- Fix NULL check in queue validation
radeon:
- RS400 HyperZ fix"
* tag 'drm-fixes-2025-03-07' of https://gitlab.freedesktop.org/drm/kernel: (22 commits)
drm/bochs: Fix DPMS regression
drm/xe/userptr: Unmap userptrs in the mmu notifier
drm/xe/hmm: Don't dereference struct page pointers without notifier lock
drm/xe/hmm: Style- and include fixes
drm/xe: Add staging tree for VM binds
drm/xe: Fix fault mode invalidation with unbind
drm/xe/vm: Fix a misplaced #endif
drm/xe/vm: Validate userptr during gpu vma prefetching
drm/amd/pm: always allow ih interrupt from fw
drm/radeon: Fix rs400_gpu_init for ATI mobility radeon Xpress 200M
drm/amdkfd: Fix NULL Pointer Dereference in KFD queue
drm/amd/display: Fix null check for pipe_ctx->plane_state in resource_build_scaling_params
drm/xe: Fix GT "for each engine" workarounds
drm/xe/userptr: properly setup pfn_flags_mask
drm/i915/mst: update max stream count to match number of pipes
drm/xe: Remove double pageflip
drm/sched: Fix preprocessor guard
drm/imagination: Fix timestamps in firmware traces
drm/imagination: only init job done fences once
drm/imagination: Hold drm_gem_gpuva lock for unmap
...
Breno Leitao [Thu, 6 Mar 2025 16:27:51 +0000 (08:27 -0800)]
block: Name the RQF flags enum
Commit 5f89154e8e9e3445f9b59 ("block: Use enum to define RQF_x bit
indexes") converted the RQF flags to an anonymous enum, which was
a beneficial change. This patch goes one step further by naming the enum
as "rqf_flags".
This naming enables exporting these flags to BPF clients, eliminating
the need to duplicate these flags in BPF code. Instead, BPF clients can
now access the same kernel-side values through CO:RE (Compile Once, Run
Everywhere), as shown in this example:
Linus Torvalds [Thu, 6 Mar 2025 23:52:15 +0000 (13:52 -1000)]
Merge tag 'bcachefs-2025-03-06' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
- Fix a compatibility issue: we shouldn't be setting incompat feature
bits unless explicitly requested
- Fix another bug where the journal alloc/resize path could spuriously
fail with -BCH_ERR_open_buckets_empty
- Copygc shouldn't run on read-only devices: fragmentation isn't an
issue if we're not currently writing to a given device, and it may
not have anywhere to move the data to
* tag 'bcachefs-2025-03-06' of git://evilpiepirate.org/bcachefs:
bcachefs: copygc now skips non-rw devices
bcachefs: Fix bch2_dev_journal_alloc() spuriously failing
bcachefs: Don't set BCH_FEATURE_incompat_version_field unless requested
Kent Overstreet [Fri, 28 Feb 2025 16:34:41 +0000 (11:34 -0500)]
bcachefs: copygc now skips non-rw devices
There's no point in doing copygc on non-rw devices: the fragmentation
doesn't matter if we're not writing to them, and we may not have
anywhere to put the data on our other devices.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previously, we fixed journal resize spuriousl failing with
-BCH_ERR_open_buckets_empty, but initial journal allocation was missed
because it didn't invoke the "block on allocator" loop at all.
Factor out the "loop on allocator" code to fix that.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Ard Biesheuvel [Thu, 6 Mar 2025 15:59:16 +0000 (16:59 +0100)]
x86/boot: Sanitize boot params before parsing command line
The 5-level paging code parses the command line to look for the 'no5lvl'
string, and does so very early, before sanitize_boot_params() has been
called and has been given the opportunity to wipe bogus data from the
fields in boot_params that are not covered by struct setup_header, and
are therefore supposed to be initialized to zero by the bootloader.
This triggers an early boot crash when using syslinux-efi to boot a
recent kernel built with CONFIG_X86_5LEVEL=y and CONFIG_EFI_STUB=n, as
the 0xff padding that now fills the unused PE/COFF header is copied into
boot_params by the bootloader, and interpreted as the top half of the
command line pointer.
Fix this by sanitizing the boot_params before use. Note that there is no
harm in calling this more than once; subsequent invocations are able to
spot that the boot_params have already been cleaned up.
- wifi: iwlwifi:
- fix A-MSDU TSO preparation
- free pages allocated when failing to build A-MSDU
- ipv6: fix dst ref loop in ila lwtunnel
- mptcp: fix 'scheduling while atomic' in
mptcp_pm_nl_append_new_local_addr
- bluetooth: add check for mgmt_alloc_skb() in
mgmt_device_connected()
- ethtool: allow NULL nlattrs when getting a phy_device
- eth: be2net: fix sleeping while atomic bugs in
be_ndo_bridge_getlink
Previous releases - always broken:
- core: support TCP GSO case for a few missing flags
- wifi: mac80211:
- fix vendor-specific inheritance
- cleanup sta TXQs on flush
- llc: do not use skb_get() before dev_queue_xmit()
- eth: ipa: nable checksum for IPA_ENDPOINT_AP_MODEM_{RX,TX}
for v4.7"
* tag 'net-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (41 commits)
net: ipv6: fix missing dst ref drop in ila lwtunnel
net: ipv6: fix dst ref loop in ila lwtunnel
mctp i3c: handle NULL header address
net: dsa: mt7530: Fix traffic flooding for MMIO devices
net-timestamp: support TCP GSO case for a few missing flags
vlan: enforce underlying device type
mptcp: fix 'scheduling while atomic' in mptcp_pm_nl_append_new_local_addr
net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device
ppp: Fix KMSAN uninit-value warning with bpf
net: ipa: Enable checksum for IPA_ENDPOINT_AP_MODEM_{RX,TX} for v4.7
net: ipa: Fix QSB data for v4.7
net: ipa: Fix v4.7 resource group names
net: hns3: make sure ptp clock is unregister and freed if hclge_ptp_get_cycle returns an error
wifi: nl80211: disable multi-link reconfiguration
net: dsa: rtl8366rb: don't prompt users for LED control
be2net: fix sleeping while atomic bugs in be_ndo_bridge_getlink
llc: do not use skb_get() before dev_queue_xmit()
wifi: cfg80211: regulatory: improve invalid hints checking
caif_virtio: fix wrong pointer check in cfv_probe()
net: gso: fix ownership in __udp_gso_segment
...
projects / users / jedix / linux-maple.git / log