Todd Vierling [Tue, 1 Dec 2015 20:59:59 +0000 (15:59 -0500)]
dtrace: ensure return value of access_process_vm() is > 0
If access_process_vm() returns a value <= 0, the loop intended to replace
NULs with whitespace in the ps string could turn into a memory sprayer
by incrementing its loop counter all the way to (uintptr_t)-1. This
often shows up as crashes with PTEs showing 0x20 stuffed inside, e.g.:
Jamie Iles [Thu, 12 Nov 2015 12:29:25 +0000 (12:29 +0000)]
ksplice: correctly clear garbage on signal handling.
The test for _TIF_SIGPENDING was inverted, and so the stack was being
cleared when there were no signals pending rather than signals pending.
Correctly test _TIF_SIGPENDING so that the freezer can be used to clear
the stack of garbage when applying Ksplice updates.
Santosh Shilimkar [Thu, 26 Nov 2015 04:08:58 +0000 (20:08 -0800)]
Merge branch 'topic/uek-4.1/upstream-cherry-picks' of git://ca-git.us.oracle.com/linux-uek into uek/uek-4.1
* 'topic/uek-4.1/upstream-cherry-picks' of git://ca-git.us.oracle.com/linux-uek:
Revert "nfs: take extra reference to fl->fl_file when running a LOCKU operation"
Todd Vierling [Mon, 23 Nov 2015 15:08:44 +0000 (10:08 -0500)]
NFSoRDMA: for local permissions, pull lkey value from the correct ib_mr
When not using local_dma_lkey, fmr_op_open() fetches a ib_mr associated
with local write permission. This value is stuffed into the returned
rpcrdma_ia, but ia->ri_dma_mr->lkey was accessed _before_ the ia->ri_dma_mr
was updated.
Fix this by pulling lkey directly from the newly fetched ib_mr rather than
the value previously stored in ia->ri_dma_mr.
Santosh Shilimkar [Fri, 20 Nov 2015 16:34:23 +0000 (08:34 -0800)]
Merge branch 'topic/uek-4.1/rpm-build' of git://ca-git.us.oracle.com/linux-uek into uek/uek-4.1
* 'topic/uek-4.1/rpm-build' of git://ca-git.us.oracle.com/linux-uek:
uek-rpm: builds: Enable kabi check
uek-rpm: builds: generate module kabi files
uek-rpm: builds: add kabi whitelist debug version
Santosh Shilimkar [Fri, 20 Nov 2015 02:03:03 +0000 (18:03 -0800)]
Merge branch 'topic/uek-4.1/rpm-build' of git://ca-git.us.oracle.com/linux-uek into uek/uek-4.1
* 'topic/uek-4.1/rpm-build' of git://ca-git.us.oracle.com/linux-uek:
uek-rpm: configs: change the x86_64 default governor to ondemand
uek-rpm: configs: sync up the EFIVAR_FS between ol6 and ol7
uek-rpm: use the latest 0.5 version of linux-firmware
Santosh Shilimkar [Fri, 20 Nov 2015 02:02:55 +0000 (18:02 -0800)]
Merge branch 'topic/uek-4.1/upstream-cherry-picks' of git://ca-git.us.oracle.com/linux-uek into uek/uek-4.1
* 'topic/uek-4.1/upstream-cherry-picks' of git://ca-git.us.oracle.com/linux-uek:
mm-hugetlbfs-fix-bugs-in-fallocate-hole-punch-of-areas-with-holes-v3
mm/hugetlbfs: fix bugs in fallocate hole punch of areas with holes
btrfs: Print Warning only if ENOSPC_DEBUG is enabled
rtnetlink: RTEXT_FILTER_SKIP_STATS support to avoid dumping inet/inet6 stats
Santosh Shilimkar [Fri, 20 Nov 2015 02:02:46 +0000 (18:02 -0800)]
Merge branch 'topic/uek-4.1/uek-carry' of git://ca-git.us.oracle.com/linux-uek into uek/uek-4.1
* 'topic/uek-4.1/uek-carry' of git://ca-git.us.oracle.com/linux-uek:
pci: Limit VPD length for megaraid_sas adapter
KABI Padding to allow future extensions
Santosh Shilimkar [Fri, 20 Nov 2015 02:02:39 +0000 (18:02 -0800)]
Merge branch 'topic/uek-4.1/dtrace' of git://ca-git.us.oracle.com/linux-uek into uek/uek-4.1
* 'topic/uek-4.1/dtrace' of git://ca-git.us.oracle.com/linux-uek:
dtrace: fire proc:::signal-send for queued signals too
dtrace: correct signal-handle probe semantics
dtrace: remove trailing space in psargs
V3:
Add more descriptive comments and minor improvements as suggested by
Naoya Horiguchi
v2:
Make remove_inode_hugepages simpler after verifying truncate can not
race with page faults here.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: "Hillf Danton" <hillf.zj@alibaba-inc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
(cherry picked from commit d4d7420e86e29267ff2e20226cbcadcf7e6eab8c) Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Hugh Dickins pointed out problems with the new hugetlbfs fallocate hole
punch code. These problems are in the routine remove_inode_hugepages and
mostly occur in the case where there are holes in the range of pages to be
removed. These holes could be the result of a previous hole punch or
simply sparse allocation. The current code could access pages outside the
specified range.
remove_inode_hugepages handles both hole punch and truncate operations.
Page index handling was fixed/cleaned up so that the loop index always
matches the page being processed. The code now only makes a single pass
through the range of pages as it was determined page faults could not race
with truncate. A cond_resched() was added after removing up to
PAGEVEC_SIZE pages.
Some totally unnecessary code in hugetlbfs_fallocate() that remained from
early development was also removed.
Tested with fallocate tests submitted here:
http://librelist.com/browser//libhugetlbfs/2015/6/25/patch-tests-add-tests-for-fallocate-system-call/
And, some ftruncate tests under development
Fixes: b5cec28d36f5 ("hugetlbfs: truncate_hugepages() takes a range of pages") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: "Hillf Danton" <hillf.zj@alibaba-inc.com> Cc: <stable@vger.kernel.org> [4.3] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
(cherry picked from commit ef9a2b7a46755b6b2d4ab522c2ffa53c6e1a0729) Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
rtnetlink: RTEXT_FILTER_SKIP_STATS support to avoid dumping inet/inet6 stats
Many commonly used functions like getifaddrs() invoke RTM_GETLINK
to dump the interface information, and do not need the
the AF_INET6 statististics that are always returned by default
from rtnl_fill_ifinfo().
Computing the statistics can be an expensive operation that impacts
scaling, so it is desirable to avoid this if the information is
not needed.
This patch adds a the RTEXT_FILTER_SKIP_STATS extended info flag that
can be passed with netlink_request() to avoid statistics computation
for the ifinfo path.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Babu Moger [Fri, 6 Nov 2015 22:11:01 +0000 (17:11 -0500)]
pci: Limit VPD length for megaraid_sas adapter
Reading or Writing of PCI VPD data causes system panic.
We saw this problem by running "lspci -vvv" in the beginning.
However this can be easily reproduced by running
cat /sys/bus/devices/XX../vpd
VPD length has been set as 32768 by default. Accessing vpd
will trigger read/write of 32k. This causes problem as we
could read data beyond the VPD end tag. Behaviour is un-
predictable when this happens. I see some other adapter doing
similar quirks(commit bffadffd43d4 ("PCI: fix VPD limit quirk
for Broadcom 5708S"))
I see there is an attempt to fix this right way.
https://patchwork.ozlabs.org/patch/534843/ or
https://lkml.org/lkml/2015/10/23/97
Tried to fix it this way, but problem is I dont see the proper
start/end TAGs(at least for this adapter) at all. The data is
mostly junk or zeros. This patch fixes the issue by setting the
vpd length to 0x80.
Signed-off-by: Babu Moger <babu.moger@oracle.com> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Orabug: 22104511
Changes since v2 -> v3
Changed the vpd length from 0 to 0x80 which leaves the
option open for someone to read first few bytes.
Changes since v1 -> v2
Removed the changes in pci_id.h. Kept all the vendor
ids in quirks.c
Santosh Shilimkar [Fri, 13 Nov 2015 19:29:22 +0000 (11:29 -0800)]
Merge branch 'topic/uek-4.1/upstream-cherry-picks' of git://ca-git.us.oracle.com/linux-uek into uek/uek-4.1
* 'topic/uek-4.1/upstream-cherry-picks' of git://ca-git.us.oracle.com/linux-uek:
mm: do not ignore mapping_gfp_mask in page cache allocation paths
PCI: Set SR-IOV NumVFs to zero after enumeration
virtio-net: drop NETIF_F_FRAGLIST
blk-mq: avoid excessive boot delays with large lun counts
Santosh Shilimkar [Fri, 13 Nov 2015 19:29:08 +0000 (11:29 -0800)]
Merge branch 'topic/uek-4.1/uek-carry' of git://ca-git.us.oracle.com/linux-uek into uek/uek-4.1
* 'topic/uek-4.1/uek-carry' of git://ca-git.us.oracle.com/linux-uek:
KABI PADDING FOR ORACLE SPECIFIC FUTURE EXTENSIONS
Disable VLAN 0 tagging for none VLAN traffic
Santosh Shilimkar [Fri, 13 Nov 2015 19:28:39 +0000 (11:28 -0800)]
Merge branch 'topic/uek-4.1/sparc' of git://ca-git.us.oracle.com/linux-uek into uek/uek-4.1
* 'topic/uek-4.1/sparc' of git://ca-git.us.oracle.com/linux-uek:
SPARC64: UEK4 LDOMS DOMAIN SERVICES UPDATE 1
i40e: Look up MAC address in Open Firmware or IDPROM
sparc64, vdso: update the CLOCK_MONOTONIC_COARSE clock
Santosh Shilimkar [Fri, 13 Nov 2015 19:28:12 +0000 (11:28 -0800)]
Merge branch 'topic/uek-4.1/ofed' of git://ca-git.us.oracle.com/linux-uek into uek/uek-4.1
* 'topic/uek-4.1/ofed' of git://ca-git.us.oracle.com/linux-uek:
RDS: establish connection for legitimate remote RDMA message
rds: remove the _reuse_ rds ib pool statistics
RDS: Add support for per socket SO_TIMESTAMP for incoming messages
RDS: Fix out-of-order RDS_CMSG_RDMA_SEND_STATUS
Integrate Uvnic functionality into uek-4.1 Revision 8008
1) S_IRWXU causing kernel soft crash changing to 0644 WARNING: CPU: 0 PID: 20907 at fs/sysfs/group.c:61 create_files+0x171/0x180() Oct 12 21:43:14 ovn87-180 kernel: [252606.588541] Attribute vhba_default_scsi_timeout: Invalid permissions 0700 [Rev 8008]
1) Support vnic for EDR based platform(uVnic) 2) Supported Types now Type 0 - XSMP_XCM_OVN - Xsigo VP780/OSDN standalone Chassis, (add pvi) Type 1 - XSMP_XCM_NOUPLINK - EDR Without uplink (add public-network) Type 2 - XSMP_XCM_UPLINK -EDR with uplink (add public-network <with -if> 3) Intelligence in driver to support all the modes 4) Added Code for printing Multicast LID [Revision 8008] 5) removed style errors
net/rds: start rdma listening after ib/iw initialization is done
Michal Hocko [Wed, 24 Jun 2015 23:58:06 +0000 (16:58 -0700)]
mm: do not ignore mapping_gfp_mask in page cache allocation paths
page_cache_read, do_generic_file_read, __generic_file_splice_read and
__ntfs_grab_cache_pages currently ignore mapping_gfp_mask when calling
add_to_page_cache_lru which might cause recursion into fs down in the
direct reclaim path if the mapping really relies on GFP_NOFS semantic.
This doesn't seem to be the case now because page_cache_read (page fault
path) doesn't seem to suffer from the reclaim recursion issues and
do_generic_file_read and __generic_file_splice_read also shouldn't be
called under fs locks which would deadlock in the reclaim path. Anyway it
is better to obey mapping gfp mask and prevent from later breakage.
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Neil Brown <neilb@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Anton Altaparmakov <anton@tuxera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit 6afdb859b71019143b8eecda02b8b29b03185055)
The enumeration path should leave NumVFs set to zero. But after 4449f079722c ("PCI: Calculate maximum number of buses required for VFs"),
we call virtfn_max_buses() in the enumeration path, which changes NumVFs.
This NumVFs change is visible via lspci and sysfs until a driver enables
SR-IOV.
Set NumVFs to zero after virtfn_max_buses() computes the maximum number of
buses.
Fixes: 4449f079722c ("PCI: Calculate maximum number of buses required for VFs") Based-on-patch-by: Ethan Zhao <ethan.zhao@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com>
virtio declares support for NETIF_F_FRAGLIST, but assumes
that there are at most MAX_SKB_FRAGS + 2 fragments which isn't
always true with a fraglist.
A longer fraglist in the skb will make the call to skb_to_sgvec overflow
the sg array, leading to memory corruption.
Drop NETIF_F_FRAGLIST so we only get what we can handle.
Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 48900cb6af4282fa0fb6ff4d72a81aa3dadb5c39) Signed-off-by: Brian Maly <brian.maly@oracle.com>
Jeff Moyer [Tue, 10 Nov 2015 22:22:59 +0000 (14:22 -0800)]
blk-mq: avoid excessive boot delays with large lun counts
Zhangqing Luo reported long boot times on a system with thousands of
LUNs when scsi-mq was enabled. He narrowed the problem down to
blk_mq_add_queue_tag_set, where every queue is frozen in order to set
the BLK_MQ_F_TAG_SHARED flag. Each added device will freeze all queues
added before it in sequence, which involves waiting for an RCU grace
period for each one. We don't need to do this. After the second queue
is added, only new queues need to be initialized with the shared tag.
We can do that by percolating the flag up to the blk_mq_tag_set, and
updating the newly added queue's hctxs if the flag is set.
This problem was introduced by commit 0d2602ca30e41 (blk-mq: improve
support for shared tags maps).
Reported-and-tested-by: Jason Luo <zhangqing.luo@oracle.com> Reviewed-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
(cherry picked from commit 2404e607a9ee36db361bebe32787dafa1f7d6c00)
Orabug: 21879600 Signed-off-by: Jason Luo <zhangqing.luo@oracle.com>
Santosh Shilimkar [Thu, 29 Oct 2015 16:24:46 +0000 (09:24 -0700)]
RDS: establish connection for legitimate remote RDMA message
The first message to a remote node should prompt a new
connection even if it is RDMA operation via CMSG. So that
means before CMSG parsing, the connection needs to be
established. Commit 3d6e0fed8edc ("rds_rdma: rds_sendmsg
should return EAGAIN if connection not setup")' tried to
address that issue as part of bug 20232581.
But it inadvertently broke the QoS policy evaluation. Basically
QoS has opposite requirement where it needs information from
CMSG to evaluate if the message is legitimate to be sent over
the wire. It basically needs to know how the total payload
which should include the actual payload and additional rdma
bytes. It then evaluates total payload with the systems QoS
thresholds to determine if the message is legitimate to be
sent.
Patch addresses these two opposite requirement by fetching
only the rdma bytes information for QoS evaluation and let
the full CMSG parsing happen after the connection is
initiated. Since the connection establishment is asynchronous,
we make sure the map failure because of unavailable
connection reach to the user by appropriate error code.
RDS: Add support for per socket SO_TIMESTAMP for incoming messages
The SO_TIMESTAMP generates time stamp for each incoming RDS message
using the wall time. Result is returned via recv_msg() in a control
message as timeval (usec resolution).
User app can enable it by using SO_TIMESTAMP setsocketopt() at
SOL_SOCKET level. CMSG data of cmsg type SO_TIMESTAMP contains the
time stamp in struct timeval format.
Padding added before ABI freeze to allow future extensions while
preserving ABI on interface structures scsi_disk ,queue_limits,block_device_operations,
sk_buff,user_namespace,ip_tunnel,net,sock,scsi_cmnd ,scsi_device
Reviwed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Manjunath Govindashetty <manjunath.govindashetty@oracle.com>
Kris Van Hees [Wed, 14 Oct 2015 09:27:44 +0000 (05:27 -0400)]
dtrace: correct signal-handle probe semantics
The proc:::signal-handle probe should fire when a signal is presented
to a task for handling, regardless of the handler settings. Previously,
we were only firing this probe when the signal actually had a specific
handler associated with it.
Orabug: 21974641 Signed-off-by: Kris Van Hees <kris.van.hees@oracle.com> Acked-by: Nick Alcock <nick.alcock@oracle.com>
Aaron Young [Wed, 11 Nov 2015 14:24:54 +0000 (06:24 -0800)]
SPARC64: UEK4 LDOMS DOMAIN SERVICES UPDATE 1
This update provides several fixes for LDoms on UEK4
(i.e. fixes/updates for the ldoms UEK4 port done previously
- See BUG 21644721) and updates for ldoms to work with Zeus.
It also provides support for libpri which requires a HV call
to retrieve the PRI from the SP and enhancements to the vlds
driver to allow multiple process to register/use a service
simultaneously - so multiple processes can use libpri at the
same time.
Sowmini Varadhan [Wed, 4 Nov 2015 19:39:56 +0000 (14:39 -0500)]
i40e: Look up MAC address in Open Firmware or IDPROM
This is the i40e equivalent of commit c762dff24c06 ("ixgbe: Look up MAC
address in Open Firmware or IDPROM").
As with that fix, attempt to look up the MAC address in Open Firmware
on systems that support it, and use IDPROM on SPARC if no OF address
is found.
In the case of the i40e there is an assumption that the default mac
address has already been set up as the primary mac filter on probe,
so if this filter is obtained from the Open Firmware or IDPROM, an
explicit write is needed via i40e_aq_mac_address_write() and
i40e_aq_add_macvlan() invocation.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
(cherry picked from commit c7a3fd4e5d009b6b5bc90ee373aac232a7089068)
If the RDS user application requests notification of RDMA send
completions, there is a possibility that RDS_CMSG_RDMA_SEND_STATUS
will be delivered out-of-order.
This can happen if RDS drops sending ACK after it received an explicit
ACK. In this case, the rds message ended up in reverse order in the
list.
Version 20140911-0.1.git365e80c.0.3 of the linux-firmware package did
not have the latest firmware for the bnx2x NICs. Since the bnx2x driver
requests a specific version of the firmware, the result was that probing
of bnx2x devices would fail.
linux-firmware version 20140911-0.1.git365e80c.0.4 contains the updated
firmware.
Cisco enic driver on UCS blades tags a None VLAN traffic with VLAN 0, this causes VMs
that do not have the kernel patch " VLAN 0 should be treated as no vlan tag" to drop all
receive traffic as these VMs do not know how to deal with the VLAN 0 tag.
This is also a problem for older VMs that can not take the mentioned patch.
This fix disables the enic driver from tagging a None VLAN traffic with VLAN 0.This
fix is controlled by a driver parameters " disable_vlan0". the default value is disable_vlan0=1
which to disable the driver from tagging traffic with VLAN 0. To revert to original behavior
add "options enic disable_vlan0=0" to /etc/modprobe.con
Signed-off-by: Adnan Misherfi <adnan.misherfi@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Pradeep Gopanapalli [Thu, 5 Nov 2015 02:58:15 +0000 (18:58 -0800)]
1) Support vnic for EDR based platform(uVnic) 2) Supported Types now Type 0 - XSMP_XCM_OVN - Xsigo VP780/OSDN standalone Chassis, (add pvi) Type 1 - XSMP_XCM_NOUPLINK - EDR Without uplink (add public-network) Type 2 - XSMP_XCM_UPLINK -EDR with uplink (add public-network <with -if> 3) Intelligence in driver to support all the modes 4) Added Code for printing Multicast LID [Revision 8008] 5) removed style errors
Nick Alcock [Mon, 2 Nov 2015 21:44:27 +0000 (21:44 +0000)]
sparc64, vdso: update the CLOCK_MONOTONIC_COARSE clock
In the significant rewrite involved in porting the SPARC vDSO code to
v4.1, the CLOCK_MONOTONIC_COARSE clock moved from being computed from
the CLOCK_REALTIME variable in the vvar page to being tracked by its own
vvar (mirroring a similar change done for x86): this vvar is maintained
in the same way, but is derived only once per jiffy tick rather than
every time clock_gettime() is called, which is likely faster under
sufficiently insane clock_gettime() than the way we did it in v3.0.
Unfortunately, the code to maintain this variable in
arch/sparc/kernel/vsyscall_gtod.c was never implemented, so
clock_gettime(CLOCK_MONOTONIC_COARSE) always returns zero. This is a
little coarser than the user would probably like.
Easily fixed by updating the relevant vvar in the same way as is done on
x86.
Reported-by: Wim Coekaerts <wim.coekaerts@oracle.com> Signed-off-by: Nick Alcock <nick.alcock@oracle.com> Reviewed-by: Dave Kleikamp <dave.kleikamp@oracle.com> Tested-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Orabug: 22137842
Santosh Shilimkar [Tue, 3 Nov 2015 21:15:03 +0000 (13:15 -0800)]
Merge branch 'topic/uek-4.1/rpm-build' of git://ca-git.us.oracle.com/linux-uek into uek/uek-4.1
* 'topic/uek-4.1/rpm-build' of git://ca-git.us.oracle.com/linux-uek:
uek-rpm: builds: add dependency on latest linux-firmware package
uek-rpm: build: Update the base release to 12 with stable v4.1.12
Santosh Shilimkar [Tue, 3 Nov 2015 21:14:51 +0000 (13:14 -0800)]
Merge branch 'topic/uek-4.1/stable-cherry-picks' of git://ca-git.us.oracle.com/linux-uek into uek/uek-4.1
* 'topic/uek-4.1/stable-cherry-picks' of git://ca-git.us.oracle.com/linux-uek: (252 commits)
Linux 4.1.12
sched/preempt, powerpc, kvm: Use need_resched() instead of should_resched()
sched/preempt, xen: Use need_resched() instead of should_resched()
nfs4: have do_vfs_lock take an inode pointer
locks: inline posix_lock_file_wait and flock_lock_file_wait
locks: new helpers - flock_lock_inode_wait and posix_lock_inode_wait
locks: have flock_lock_file take an inode pointer instead of a filp
svcrdma: handle rdma read with a non-zero initial page offset
arm64: Fix THP protection change logic
pinctrl: imx25: ensure that a pin with id i is at position i in the info array
sched/preempt: Fix cond_resched_lock() and cond_resched_softirq()
sched/preempt: Rename PREEMPT_CHECK_OFFSET to PREEMPT_DISABLE_OFFSET
rbd: fix double free on rbd_dev->header_name
dm thin: fix missing pool reference count decrement in pool_ctr error path
drm/radeon: add pm sysfs files late
drm/radeon: attach tile property to mst connector
drm/dp/mst: make mst i2c transfer code more robust.
drm/nouveau/fbcon: take runpm reference when userspace has an open fd
workqueue: make sure delayed work run in local cpu
i2c: designware-platdrv: enable RuntimePM before registering to the core
...
Santosh Shilimkar [Fri, 30 Oct 2015 16:25:07 +0000 (09:25 -0700)]
Merge branch 'topic/uek-4.1/ocfs2' of git://ca-git.us.oracle.com/linux-uek into uek/uek-4.1
* 'topic/uek-4.1/ocfs2' of git://ca-git.us.oracle.com/linux-uek:
Revert "ocfs2: change ip_unaligned_aio to of type mutex from atomit_t"
ocfs2: fix a performance issue with synced buffer io
Santosh Shilimkar [Fri, 30 Oct 2015 16:24:43 +0000 (09:24 -0700)]
Merge branch 'topic/uek-4.1/xen' of git://ca-git.us.oracle.com/linux-uek into uek/uek-4.1
* 'topic/uek-4.1/xen' of git://ca-git.us.oracle.com/linux-uek:
xen-netfront: update num_queues to real created
xen-blkfront: check for null drvdata in blkback_changed (XenbusStateClosing)
There are several hits that WR buffer allocation(kmalloc) failed.
It failed at order 3 and/or 4 contigous pages allocation. At the same time
there are actually 100MB+ free memory but well fragmented.
So try vmalloc when kmalloc failed.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Change I40E_FW_API_VERSION_MINOR to be consistent with 1.3.38
sourceforge driver. Currently i40e driver is reporting NVM
image is too old with the latest production image from 1.3.38.
John Haxby [Thu, 24 Sep 2015 17:24:35 +0000 (18:24 +0100)]
crypto: testmgr - Disable fips-allowed for authenc() and des() ciphers
No authenc() ciphers are FIPS approved, nor is ecb(des).
After the end of 2015, ansi_cprng will also be non-approved.
Signed-off-by: John Haxby <john.haxby@oracle.com> Acked-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 284a0f6e87b0721e1be8bca419893902d9cf577a)
Orabug: 21863123 Signed-off-by: John Haxby <john.haxby@oracle.com>
Test shows ip_unaligned_aio will cost much cpu clock when doing aio+dio(in a
function named mutex_spin_on_owner), and will significant affect performance in
a system with poor cpu.
The cause is we should not call mutex_unlock(see the comments above
mutex_unlock) in ocfs2_dio_end_io, which will be in irq context when doing
aio+dio.
Revert the patch to use wait_event/wake_up_all to do the work.
Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
If we flush data with WB_SYNC_ALL which is set in struct writeback_control. It
will be transfered to a bio with WRITE_SYNC flag(that is done in the interface
block_write_full_page()). And after multi-queue is introduced to kernel block
layer, a bio with SYNC flag will be sent to disk without queue. It will affect
the performance significantly if the disk has a poor iops.
This patch is a work around to this. Use filemap_flush() to try to flush dirty
pages with WB_SYNC_NONE flag.
* In journal=order mode, this is safe because the following
jbd2_journal_force_commit() will ensure data integrity.
* In journal=writeback mode, we will call filemap_write_and_wait_range() to
meet the semantics of O_SYNC & O_DIRECT.
It should help to improve performance with direct io (in the case when direct
io fall to buffer io), and buffer io with O_SYNC.
Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Joe Jin [Mon, 19 Oct 2015 05:37:17 +0000 (13:37 +0800)]
xen-netfront: update num_queues to real created
Sometimes xennet_create_queues() may failed to created all requested
queues, we need to update num_queues to real created to avoid NULL
pointer dereference.
Signed-off-by: Joe Jin <joe.jin@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David S. Miller <davem@davemloft.net>
xen-blkfront will crash if the check to talk_to_blkback()
in blkback_changed()(XenbusStateInitWait) returns an error.
The driver data is freed and info is set to NULL. Later during
the close process via talk_to_blkback's call to xenbus_dev_fatal()
the null pointer is passed to and dereference in blkfront_closing.
Signed-off-by: Cathy Avery <cathy.avery@oracle.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Joe Jin <joe.jin@oracle.com>
This code is used only when CONFIG_PREEMPT=n and only in non-atomic context:
xen_in_preemptible_hcall is set only in privcmd_ioctl_hypercall().
Thus preempt_count is zero and should_resched() is equal to need_resched().
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Graf <agraf@suse.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150715095201.12246.49283.stgit@buzz Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that we have file locking helpers that can deal with an inode
instead of a filp, we can change the NFSv4 locking code to use that
instead.
This should fix the case where we have a filp that is closed while flock
or OFD locks are set on it, and the task is signaled so that it doesn't
wait for the LOCKU reply to come in before the filp is freed. At that
point we can end up with a use-after-free with the current code, which
relies on dereferencing the fl_file in the lock request.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Reviewed-by: "J. Bruce Fields" <bfields@fieldses.org> Tested-by: "J. Bruce Fields" <bfields@fieldses.org> Cc: William Dauchy <william@gandi.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to fix a use-after-free in NFS, we need to be able to remove
locks from an inode after the filp associated with them may have already
been freed. flock_lock_file already only dereferences the filp to get to
the inode, so just change it so the callers do that.
All of the callers already pass in a lock request that has the fl_file
set properly, so we don't need to pass it in individually. With that
change it now only dereferences the filp to get to the inode, so just
push that out to the callers.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Reviewed-by: "J. Bruce Fields" <bfields@fieldses.org> Tested-by: "J. Bruce Fields" <bfields@fieldses.org> Cc: William Dauchy <william@gandi.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The server rdma_read_chunk_lcl() and rdma_read_chunk_frmr() functions
were not taking into account the initial page_offset when determining
the rdma read length. This resulted in a read who's starting address
and length exceeded the base/bounds of the frmr.
The server gets an async error from the rdma device and kills the
connection, and the client then reconnects and resends. This repeats
indefinitely, and the application hangs.
Most work loads don't tickle this bug apparently, but one test hit it
every time: building the linux kernel on a 16 core node with 'make -j
16 O=/mnt/0' where /mnt/0 is a ramdisk mounted via NFSRDMA.
This bug seems to only be tripped with devices having small fastreg page
list depths. I didn't see it with mlx4, for instance.
Fixes: 0bf4828983df ('svcrdma: refactor marshalling logic') Signed-off-by: Steve Wise <swise@opengridcomputing.com> Tested-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6910fa1 ("arm64: enable PTE type bit in the mask for pte_modify") fixes
a problem whereby a large block of PROT_NONE mapped memory is
incorrectly mapped as block descriptors when mprotect is called.
Unfortunately, a subtle bug was introduced by this fix to the THP logic.
If one mmaps a large block of memory, then faults it such that it is
collapsed into THPs; resulting calls to mprotect on this area of memory
will lead to incorrect table descriptors being written instead of block
descriptors. This is because pmd_modify calls pte_modify which is now
allowed to modify the type of the page table entry.
This patch reverts commit 6910fa16dbe142f6a0fd0fd7c249f9883ff7fc8a, and
fixes the problem it was trying to address by adjusting PAGE_NONE to
represent a table entry. Thus no change in pte type is required when
moving from PROT_NONE to a different protection.
Fixes: 6910fa16dbe1 ("arm64: enable PTE type bit in the mask for pte_modify") Cc: <stable@vger.kernel.org> # 4.0+ Cc: Feng Kan <fkan@apm.com> Reported-by: Ganapatrao Kulkarni <Ganapatrao.Kulkarni@caviumnetworks.com> Tested-by: Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
[SteveC: backported 1a541b4e3cd6f5795022514114854b3e1345f24e to 4.1 and
4.2 stable. Just one minor fix to second part to allow patch to apply
cleanly, no logic changed.] Signed-off-by: Steve Capper <steve.capper@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These functions check should_resched() before unlocking spinlock/bh-enable:
preempt_count always non-zero => should_resched() always returns false.
cond_resched_lock() worked iff spin_needbreak is set.
This patch adds argument "preempt_offset" to should_resched().
preempt_count offset constants for that:
PREEMPT_DISABLE_OFFSET - offset after preempt_disable()
PREEMPT_LOCK_OFFSET - offset after spin_lock()
SOFTIRQ_DISABLE_OFFSET - offset after local_bh_distable()
SOFTIRQ_LOCK_OFFSET - offset after spin_lock_bh()
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Graf <agraf@suse.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: bdb438065890 ("sched: Extract the basic add/sub preempt_count modifiers") Link: http://lkml.kernel.org/r/20150715095204.12246.98268.stgit@buzz Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"CHECK" suggests it's only used as a comparison mask. But now it's used
further as a config-conditional preempt disabler offset. Lets
disambiguate this name.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1431441711-29753-4-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If rbd_dev_image_probe() in rbd_dev_probe_parent() fails, header_name
is freed twice: once in rbd_dev_probe_parent() and then in its caller
rbd_dev_image_probe() (rbd_dev_image_probe() is called recursively to
handle parent images).
rbd_dev_probe_parent() is responsible for probing the parent, so it
shouldn't muck with clone's fields.
They were added relatively early in the driver init process
which meant that in some cases the driver was not finished
initializing before external tools tried to use them which
could result in a crash depending on the timing.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need to do this in order to prevent accesses to the device while it's
powered down. Userspace may have an mmap of the fb, and there's no good
way (that I know of) to prevent it from touching the device otherwise.
This fixes some nasty races between runpm and plymouth on some systems,
which result in the GPU getting very upset and hanging the boot.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
My system keeps crashing with below message. vmstat_update() schedules a delayed
work in current cpu and expects the work runs in the cpu.
schedule_delayed_work() is expected to make delayed work run in local cpu. The
problem is timer can be migrated with NO_HZ. __queue_work() queues work in
timer handler, which could run in a different cpu other than where the delayed
work is scheduled. The end result is the delayed work runs in different cpu.
The patch makes __queue_delayed_work records local cpu earlier. Where the timer
runs doesn't change where the work runs with the change.
The core may register clients attached to this master which may use
funtionality from the master. So, RuntimePM must be enabled before, otherwise
this will fail.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ACPI SSCN/FMCN methods were originally added because then the platform can
provide the most accurate HCNT/LCNT values to the driver. However, this
seems not to be true for Dell Inspiron 7348 where using these causes the
touchpad to fail in boot:
i2c_hid i2c-DLL0675:00: failed to retrieve report from device.
i2c_designware INT3433:00: i2c_dw_handle_tx_abort: lost arbitration
i2c_hid i2c-DLL0675:00: failed to retrieve report from device.
i2c_designware INT3433:00: controller timed out
The values received from ACPI are (in fast mode):
HCNT: 72
LCNT: 160
this translates to following timings (input clock is 100MHz on Broadwell):
tHIGH: 720 ns (spec min 600 ns)
tLOW: 1600 ns (spec min 1300 ns)
Bus period: 2920 ns (assuming 300 ns tf and tr)
Bus speed: 342.5 kHz
Both tHIGH and tLOW are within the I2C specification.
The calculated values when ACPI parameters are not used are (in fast mode):
HCNT: 87
LCNT: 159
which translates to:
tHIGH: 870 ns (spec min 600 ns)
tLOW: 1590 ns (spec min 1300 ns)
Bus period 3060 ns (assuming 300 ns tf and tr)
Bus speed 326.8 kHz
These values are also within the I2C specification.
Since both ACPI and calculated values meet the I2C specification timing
requirements it is hard to say why the touchpad does not function properly
with the ACPI values except that the bus speed is higher in this case (but
still well below the max 400kHz).
Solve this by adding DMI quirk to the driver that disables using ACPI
parameters on this particulare machine.
Reported-by: Pavel Roskin <plroskin@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Pavel Roskin <plroskin@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / users / jedix / linux-maple.git / log