iio: light: rpr0521: Use generic iio_pollfunc_store_time()
The custom rpr0521_trigger_consumer_store_time() is registered as trigger
handler in the devm_iio_triggered_buffer_setup() function. This function
is called from the calling of the iio_trigger_poll() used in the
sysfs/hrt triggers and it is not used anywhere else in this driver.
The irq handler of the driver is the rpr0521_drdy_irq_handler() which
saves the timestamp and then wakes the irq thread. The irq thread is
the rpr0521_drdy_irq_thread() function which checks if the irq came
from the sensor and wakes up the trigger threaded handler through
iio_trigger_poll_nested() or returns IRQ_NONE in case the irq didn't
come from this sensor.
This means that in the current driver, you can't reach the
rpr0521_trigger_consumer_store_time() when the device's irq is
triggered. This means that the extra check of iio_trigger_using_own()
is redundant since it will always be false so the general
iio_pollfunc_store_time() can be used.
Abhash Jha [Mon, 7 Oct 2024 15:22:23 +0000 (20:52 +0530)]
iio: light: vl6180: Add support for Continuous Mode
Added support for getting continuous readings from vl6180 using
triggered buffer approach. The continuous mode can be enabled by enabling
the buffer. Also added a trigger and appropriate checks to see that it is
used with this device.
Abhash Jha [Mon, 7 Oct 2024 15:22:22 +0000 (20:52 +0530)]
iio: light: vl6180: Added Interrupt support for single shot access
The interrupts are serviced in the `vl6180_measure` function when the
irq_handler signals that the reading is complete. We now can read
asynchronously if `client->irq` is set.
Abhash Jha [Mon, 7 Oct 2024 15:22:21 +0000 (20:52 +0530)]
iio: light: vl6180: Add configurable inter-measurement period support
Expose the IIO_CHAN_INFO_SAMP_FREQ attribute as a way to configure the
inter-measurement period for both the IIO_DISTANCE and IIO_LIGHT
channels. The inter-measurement period must be given in milihertz.
Javier Carrasco [Mon, 7 Oct 2024 20:36:38 +0000 (22:36 +0200)]
iio: light: veml6030: add support for veml7700
The veml7700 contains the same sensor as the veml6030 in a different
package with no interrupt line and no pin to select the I2C address.
To handle the lack of the interrupt line and profit from the existing
support for the veml6030, add a specific iio_chan_spec with no
(num_)event_spec(s), and register the device's info from the
veml6030_info_no_irq struct.
Javier Carrasco [Mon, 7 Oct 2024 20:36:37 +0000 (22:36 +0200)]
dt-bindings: iio: light: veml6030: add veml7700
The veml7700 contains the same chip as the veml6030 in a different
package with no interrupt line and no pin to select the I2C address,
which makes it suitable to be supported by the same bindings.
Javier Carrasco [Mon, 7 Oct 2024 20:36:36 +0000 (22:36 +0200)]
iio: light: veml6035: fix read_avail in no_irq case for veml6035
The iio_info is identical for veml6030 and veml6035. Moreover,
veml6035_info_no_irq is missing the initialization of the read_avail
member, which is actually a bug if no irq is provided.
Instead of adding the missing initialization, remove the device-specific
iio_info and use the existing one for the veml6030.
Add a driver for the AD762x and AD796x family of ADCs. These are
pin-compatible devices using an LVDS interface for data transfer,
capable of sampling at rates of 6 (AD7625), 10 (AD7626), and 5
(AD7960/AD7961) MSPS, respectively. They also feature multiple voltage
reference options based on the configuration of the EN1/EN0 pins, which
can be set in the devicetree.
Jonathan Cameron [Sat, 12 Oct 2024 12:38:09 +0000 (13:38 +0100)]
Merge tag 'pwm/duty_offset-for-6.13-rc1' into togreg
pwm: Support for duty_offset
Support a new abstraction for pwm configuration that allows to specify
the time between start of period and the raising edge of the signal
("duty offset").
This is used in a patch series by Trevor Gamblin for triggering an ADC
conversion and afterwards read out the result. See
https://lore.kernel.org/linux-iio/20240909-ad7625_r1-v5-0-60a397768b25@baylibre.com/
for more details.
Uwe Kleine-König [Wed, 9 Oct 2024 06:00:57 +0000 (08:00 +0200)]
iio: Switch back to struct platform_driver::remove()
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/iio/ to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
While touching these files, make indention of the struct initializer
consistent in several files.
Colin Ian King [Thu, 10 Oct 2024 17:08:35 +0000 (18:08 +0100)]
iio: pressure: rohm-bm1390: Remove redundant if statement
There is a check on non-zero ret that is redundant because the
same check is being performed in a previous if statement and
also before that. The check is not required, remove it.
Alex Lanzano [Wed, 2 Oct 2024 03:36:22 +0000 (23:36 -0400)]
iio: imu: bmi270: Add spi driver for bmi270 imu
Implement SPI driver for the Bosch BMI270 6-axis IMU. Provide raw read
write access to acceleration and angle velocity measurements via the SPI
interface on the device.
Linus Torvalds [Sun, 6 Oct 2024 18:34:55 +0000 (11:34 -0700)]
Merge tag 'kbuild-fixes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Move non-boot built-in DTBs to the .rodata section
- Fix Kconfig bugs
- Fix maint scripts in the linux-image Debian package
- Import some list macros to scripts/include/
* tag 'kbuild-fixes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: deb-pkg: Remove blank first line from maint scripts
kbuild: fix a typo dt_binding_schema -> dt_binding_schemas
scripts: import more list macros
kconfig: qconf: fix buffer overflow in debug links
kconfig: qconf: move conf_read() before drawing tree pain
kconfig: clear expr::val_is_valid when allocated
kconfig: fix infinite loop in sym_calc_choice()
kbuild: move non-boot built-in DTBs to .rodata section
Linus Torvalds [Sun, 6 Oct 2024 18:11:01 +0000 (11:11 -0700)]
Merge tag 'platform-drivers-x86-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Intel PMC fix for suspend/resume issues on some Sky and Kaby Lake
laptops
- Intel Diamond Rapids hw-id additions
- Documentation and MAINTAINERS fixes
- Some other small fixes
* tag 'platform-drivers-x86-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errors
platform/x86: wmi: Update WMI driver API documentation
platform/x86: dell-ddv: Fix typo in documentation
platform/x86: dell-sysman: add support for alienware products
platform/x86/intel: power-domains: Add Diamond Rapids support
platform/x86: ISST: Add Diamond Rapids to support list
platform/x86:intel/pmc: Disable ACPI PM Timer disabling on Sky and Kaby Lake
platform/x86: dell-laptop: Do not fail when encountering unsupported batteries
MAINTAINERS: Update Intel In Field Scan(IFS) entry
platform/x86: ISST: Fix the KASAN report slab-out-of-bounds bug
Linus Torvalds [Sun, 6 Oct 2024 17:53:28 +0000 (10:53 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
x86:
- Fix compilation with KVM_INTEL=KVM_AMD=n
- Fix disabling KVM_X86_QUIRK_SLOT_ZAP_ALL when shadow MMU is in use
Selftests:
- Fix compilation on non-x86 architectures"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/reboot: emergency callbacks are now registered by common KVM code
KVM: x86: leave kvm.ko out of the build if no vendor module is requested
KVM: x86/mmu: fix KVM_X86_QUIRK_SLOT_ZAP_ALL for shadow MMU
KVM: arm64: Fix kvm_has_feat*() handling of negative features
KVM: selftests: Fix build on architectures other than x86_64
KVM: arm64: Another reviewer reshuffle
KVM: arm64: Constrain the host to the maximum shared SVE VL with pKVM
KVM: arm64: Fix __pkvm_init_vcpu cptr_el2 error path
Aaron Thompson [Fri, 4 Oct 2024 07:52:45 +0000 (07:52 +0000)]
kbuild: deb-pkg: Remove blank first line from maint scripts
The blank line causes execve() to fail:
# strace ./postinst
execve("./postinst", ...) = -1 ENOEXEC (Exec format error)
strace: exec: Exec format error
+++ exited with 1 +++
However running the scripts via shell does work (at least with bash)
because the shell attempts to execute the file as a shell script when
execve() fails.
Fixes: b611daae5efc ("kbuild: deb-pkg: split image and debug objects staging out into functions") Signed-off-by: Aaron Thompson <dev@aaront.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Javier Carrasco [Tue, 1 Oct 2024 20:21:21 +0000 (22:21 +0200)]
dt-bindings: iio: light: veml6030: add veml6035
The veml6035 is a similar ambient light sensor to the veml6030, and
from the bindings point of view, it shares the same properties. Its
only difference in that respect is a different I2C address.
Estend the existing bindings to support the veml6035 ALS.
Javier Carrasco [Tue, 1 Oct 2024 20:21:20 +0000 (22:21 +0200)]
iio: light: veml6030: power off device in probe error paths
Move devm_add_action_or_reset() with a device shut down action to the
hardware initialization function to ensure that any error path after
powering on the device leads to a power off. Add struct device *dev
to the argument list to clarify the device the action is registered
against, and use it wherever &client->dev was used.
Javier Carrasco [Tue, 1 Oct 2024 20:21:19 +0000 (22:21 +0200)]
iio: light: veml6030: drop processed info for white channel
The resolution of the WHITE channel is not provided by the manufacturer,
neither in the datasheet nor in the application note (even their
proprietary application only processes the ALS channel, giving raw
values for WHITE).
The current implementation assumes that both resolutions are identical,
which is extremely unlikely, especially for photodiodes with different
spectral responses.
Drop the processed information as it is meaningless.
Javier Carrasco [Tue, 1 Oct 2024 20:21:18 +0000 (22:21 +0200)]
iio: light: veml6030: use read_avail() for available attributes
Drop custom attributes by using the standard read_avail() callback to
read scale and integration time. When at it, add the integration time
and scale attributes fro the WHITE channel, as they modify its value as
well. To avoid breaking the current ABI, these attributes must be kept
as separate for both channels even though they are shared under the
hood.
Javier Carrasco [Tue, 1 Oct 2024 20:21:14 +0000 (22:21 +0200)]
iio: light: veml6030: add set up delay after any power on sequence
The veml6030 requires a delay of 4 ms after activating the sensor. That
is done correctly during the hw initialization, but it's missing after
resuming.
Move the delay to the power on function to make sure that it is always
observerd. When at it, use fsleep() instead of usleep_range() as such a
narrow range is not required.
iio: pressure: bmp280: Use char instead of s32 for data buffer
As it was reported and discussed here [1], storing the sensor data in an
endian aware s32 buffer is not optimal. Advertising the timestamp as an
addition of 2 s32 variables which is also implied is again not the best
practice. For that reason, change the s32 sensor_data buffer to a u8
buffer and align it properly.
Herve Codina [Thu, 3 Oct 2024 11:46:40 +0000 (13:46 +0200)]
iio: adc: Add support for the GE HealthCare PMC ADC
The GE HealthCare PMC Analog to Digital Converter (ADC) is a 16-Channel
(voltage and current), 16-Bit ADC with an I2C Interface.
Signed-off-by: Herve Codina <herve.codina@bootlin.com> Tested-by: Ian Ray <ian.ray@gehealthcare.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20241003114641.672086-4-herve.codina@bootlin.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Hans de Goede [Sat, 5 Oct 2024 13:05:45 +0000 (15:05 +0200)]
platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errors
x86_android_tablet_remove() frees the pdevs[] array, so it should not
be used after calling x86_android_tablet_remove().
When platform_device_register() fails, store the pdevs[x] PTR_ERR() value
into the local ret variable before calling x86_android_tablet_remove()
to avoid using pdevs[] after it has been freed.
Fixes: 5eba0141206e ("platform/x86: x86-android-tablets: Add support for instantiating platform-devs") Fixes: e2200d3f26da ("platform/x86: x86-android-tablets: Add gpio_keys support to x86_android_tablet_init()") Cc: stable@vger.kernel.org Reported-by: Aleksandr Burakov <a.burakov@rosalinux.ru> Closes: https://lore.kernel.org/platform-driver-x86/20240917120458.7300-1-a.burakov@rosalinux.ru/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20241005130545.64136-1-hdegoede@redhat.com
Armin Wolf [Sat, 5 Oct 2024 21:38:24 +0000 (23:38 +0200)]
platform/x86: wmi: Update WMI driver API documentation
The WMI driver core now passes the WMI event data to legacy notify
handlers, so WMI devices sharing notification IDs are now being
handled properly.
Fixes: e04e2b760ddb ("platform/x86: wmi: Pass event data directly to legacy notify handlers") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20241005213825.701887-1-W_Armin@gmx.de Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Thu, 3 Oct 2024 20:26:13 +0000 (22:26 +0200)]
platform/x86:intel/pmc: Disable ACPI PM Timer disabling on Sky and Kaby Lake
There have been multiple reports that the ACPI PM Timer disabling is
causing Sky and Kaby Lake systems to hang on all suspend (s2idle, s3,
hibernate) methods.
Remove the acpi_pm_tmr_ctl_offset and acpi_pm_tmr_disable_bit settings from
spt_reg_map to disable the ACPI PM Timer disabling on Sky and Kaby Lake to
fix the hang on suspend.
Fixes: e86c8186d03a ("platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended") Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Closes: https://lore.kernel.org/linux-pm/18784f62-91ff-4d88-9621-6c88eb0af2b5@molgen.mpg.de/ Reported-by: Todd Brandt <todd.e.brandt@intel.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219346 Cc: Marek Maslanka <mmaslanka@google.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Todd Brandt <todd.e.brandt@intel.com> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13 9360/0596KF Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20241003202614.17181-2-hdegoede@redhat.com
Armin Wolf [Tue, 1 Oct 2024 21:28:35 +0000 (23:28 +0200)]
platform/x86: dell-laptop: Do not fail when encountering unsupported batteries
If the battery hook encounters a unsupported battery, it will
return an error. This in turn will cause the battery driver to
automatically unregister the battery hook.
On machines with multiple batteries however, this will prevent
the battery hook from handling the primary battery, since it will
always get unregistered upon encountering one of the unsupported
batteries.
Fix this by simply ignoring unsupported batteries.
Reviewed-by: Pali Rohár <pali@kernel.org> Fixes: ab58016c68cc ("platform/x86:dell-laptop: Add knobs to change battery charge settings") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20241001212835.341788-4-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Jithu Joseph [Tue, 1 Oct 2024 17:08:08 +0000 (10:08 -0700)]
MAINTAINERS: Update Intel In Field Scan(IFS) entry
Ashok is no longer with Intel and his e-mail address will start bouncing
soon. Update his email address to the new one he provided to ensure
correct contact details in the MAINTAINERS file.
Paolo Bonzini [Tue, 1 Oct 2024 14:34:58 +0000 (10:34 -0400)]
x86/reboot: emergency callbacks are now registered by common KVM code
Guard them with CONFIG_KVM_X86_COMMON rather than the two vendor modules.
In practice this has no functional change, because CONFIG_KVM_X86_COMMON
is set if and only if at least one vendor-specific module is being built.
However, it is cleaner to specify CONFIG_KVM_X86_COMMON for functions that
are used in kvm.ko.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled") Fixes: 6d55a94222db ("x86/reboot: Unconditionally define cpu_emergency_virt_cb typedef") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 1 Oct 2024 14:15:01 +0000 (10:15 -0400)]
KVM: x86: leave kvm.ko out of the build if no vendor module is requested
kvm.ko is nothing but library code shared by kvm-intel.ko and kvm-amd.ko.
It provides no functionality on its own and it is unnecessary unless one
of the vendor-specific module is compiled. In particular, /dev/kvm is
not created until one of kvm-intel.ko or kvm-amd.ko is loaded.
Use CONFIG_KVM to decide if it is built-in or a module, but use the
vendor-specific modules for the actual decision on whether to build it.
This also fixes a build failure when CONFIG_KVM_INTEL and CONFIG_KVM_AMD
are both disabled. The cpu_emergency_register_virt_callback() function
is called from kvm.ko, but it is only defined if at least one of
CONFIG_KVM_INTEL and CONFIG_KVM_AMD is provided.
Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Sat, 5 Oct 2024 22:18:04 +0000 (15:18 -0700)]
Merge tag 'bcachefs-2024-10-05' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"A lot of little fixes, bigger ones include:
- bcachefs's __wait_on_freeing_inode() was broken in rc1 due to vfs
changes, now fixed along with another lost wakeup
- fragmentation LRU fixes; fsck now repairs successfully (this is the
data structure copygc uses); along with some nice simplification.
- Rework logged op error handling, so that if logged op replay errors
(due to another filesystem error) we delete the logged op instead
of going into an infinite loop)
- Various small filesystem connectivitity repair fixes"
* tag 'bcachefs-2024-10-05' of git://evilpiepirate.org/bcachefs:
bcachefs: Rework logged op error handling
bcachefs: Add warn param to subvol_get_snapshot, peek_inode
bcachefs: Kill snapshot arg to fsck_write_inode()
bcachefs: Check for unlinked, non-empty dirs in check_inode()
bcachefs: Check for unlinked inodes with dirents
bcachefs: Check for directories with no backpointers
bcachefs: Kill alloc_v4.fragmentation_lru
bcachefs: minor lru fsck fixes
bcachefs: Mark more errors AUTOFIX
bcachefs: Make sure we print error that causes fsck to bail out
bcachefs: bkey errors are only AUTOFIX during read
bcachefs: Create lost+found in correct snapshot
bcachefs: Fix reattach_inode()
bcachefs: Add missing wakeup to bch2_inode_hash_remove()
bcachefs: Fix trans_commit disk accounting revert
bcachefs: Fix bch2_inode_is_open() check
bcachefs: Fix return type of dirent_points_to_inode_nowarn()
bcachefs: Fix bad shift in bch2_read_flag_list()
Linus Torvalds [Sat, 5 Oct 2024 17:47:00 +0000 (10:47 -0700)]
Merge tag 'ext4_for_linus-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix some ext4 bugs and regressions relating to oneline resize and fast
commits"
* tag 'ext4_for_linus-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix off by one issue in alloc_flex_gd()
ext4: mark fc as ineligible using an handle in ext4_xattr_set()
ext4: use handle to mark fc as ineligible in __track_dentry_update()
Linus Torvalds [Sat, 5 Oct 2024 17:31:04 +0000 (10:31 -0700)]
Merge tag 'i2c-for-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
- Fix potential deadlock during runtime suspend and resume (stm32f7)
* tag 'i2c-for-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: stm32f7: Do not prepare/unprepare clock during runtime suspend/resume
Linus Torvalds [Sat, 5 Oct 2024 17:25:04 +0000 (10:25 -0700)]
Merge tag 'spi-fix-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small set of driver specific fixes that came in since the merge
window, about half of which is fixes for correctness in the use of the
runtime PM APIs done as part of a broader cleanup"
* tag 'spi-fix-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: s3c64xx: fix timeout counters in flush_fifo
spi: atmel-quadspi: Fix wrong register value written to MR
spi: spi-cadence: Fix missing spi_controller_is_target() check
spi: spi-cadence: Fix pm_runtime_set_suspended() with runtime pm enabled
spi: spi-imx: Fix pm_runtime_set_suspended() with runtime pm enabled
Linus Torvalds [Sat, 5 Oct 2024 17:19:14 +0000 (10:19 -0700)]
Merge tag 'hardening-v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- gcc plugins: Avoid Kconfig warnings with randstruct (Nathan
Chancellor)
- MAINTAINERS: Add security/Kconfig.hardening to hardening section
(Nathan Chancellor)
- MAINTAINERS: Add unsafe_memcpy() to the FORTIFY review list
* tag 'hardening-v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
MAINTAINERS: Add security/Kconfig.hardening to hardening section
hardening: Adjust dependencies in selection of MODVERSIONS
MAINTAINERS: Add unsafe_memcpy() to the FORTIFY review list
Linus Torvalds [Sat, 5 Oct 2024 17:10:45 +0000 (10:10 -0700)]
Merge tag 'lsm-pr-20241004' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm revert from Paul Moore:
"Here is the CONFIG_SECURITY_TOMOYO_LKM revert that we've been
discussing this week. With near unanimous agreement that the original
TOMOYO patches were not the right way to solve the distro problem
Tetsuo is trying the solve, reverting is our best option at this time"
* tag 'lsm-pr-20241004' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
tomoyo: revert CONFIG_SECURITY_TOMOYO_LKM support
platform/x86: ISST: Fix the KASAN report slab-out-of-bounds bug
Attaching SST PCI device to VM causes "BUG: KASAN: slab-out-of-bounds".
kasan report:
[ 19.411889] ==================================================================
[ 19.413702] BUG: KASAN: slab-out-of-bounds in _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.415634] Read of size 8 at addr ffff888829e65200 by task cpuhp/16/113
[ 19.417368]
[ 19.418627] CPU: 16 PID: 113 Comm: cpuhp/16 Tainted: G E 6.9.0 #10
[ 19.420435] Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.20192059.B64.2207280713 07/28/2022
[ 19.422687] Call Trace:
[ 19.424091] <TASK>
[ 19.425448] dump_stack_lvl+0x5d/0x80
[ 19.426963] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.428694] print_report+0x19d/0x52e
[ 19.430206] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 19.431837] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.433539] kasan_report+0xf0/0x170
[ 19.435019] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.436709] _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.438379] ? __pfx_sched_clock_cpu+0x10/0x10
[ 19.439910] isst_if_cpu_online+0x406/0x58f [isst_if_common]
[ 19.441573] ? __pfx_isst_if_cpu_online+0x10/0x10 [isst_if_common]
[ 19.443263] ? ttwu_queue_wakelist+0x2c1/0x360
[ 19.444797] cpuhp_invoke_callback+0x221/0xec0
[ 19.446337] cpuhp_thread_fun+0x21b/0x610
[ 19.447814] ? __pfx_cpuhp_thread_fun+0x10/0x10
[ 19.449354] smpboot_thread_fn+0x2e7/0x6e0
[ 19.450859] ? __pfx_smpboot_thread_fn+0x10/0x10
[ 19.452405] kthread+0x29c/0x350
[ 19.453817] ? __pfx_kthread+0x10/0x10
[ 19.455253] ret_from_fork+0x31/0x70
[ 19.456685] ? __pfx_kthread+0x10/0x10
[ 19.458114] ret_from_fork_asm+0x1a/0x30
[ 19.459573] </TASK>
[ 19.460853]
[ 19.462055] Allocated by task 1198:
[ 19.463410] kasan_save_stack+0x30/0x50
[ 19.464788] kasan_save_track+0x14/0x30
[ 19.466139] __kasan_kmalloc+0xaa/0xb0
[ 19.467465] __kmalloc+0x1cd/0x470
[ 19.468748] isst_if_cdev_register+0x1da/0x350 [isst_if_common]
[ 19.470233] isst_if_mbox_init+0x108/0xff0 [isst_if_mbox_msr]
[ 19.471670] do_one_initcall+0xa4/0x380
[ 19.472903] do_init_module+0x238/0x760
[ 19.474105] load_module+0x5239/0x6f00
[ 19.475285] init_module_from_file+0xd1/0x130
[ 19.476506] idempotent_init_module+0x23b/0x650
[ 19.477725] __x64_sys_finit_module+0xbe/0x130
[ 19.476506] idempotent_init_module+0x23b/0x650
[ 19.477725] __x64_sys_finit_module+0xbe/0x130
[ 19.478920] do_syscall_64+0x82/0x160
[ 19.480036] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 19.481292]
[ 19.482205] The buggy address belongs to the object at ffff888829e65000
which belongs to the cache kmalloc-512 of size 512
[ 19.484818] The buggy address is located 0 bytes to the right of
allocated 512-byte region [ffff888829e65000, ffff888829e65200)
[ 19.487447]
[ 19.488328] The buggy address belongs to the physical page:
[ 19.489569] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888829e60c00 pfn:0x829e60
[ 19.491140] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 19.492466] anon flags: 0x57ffffc0000840(slab|head|node=1|zone=2|lastcpupid=0x1fffff)
[ 19.493914] page_type: 0xffffffff()
[ 19.494988] raw: 0057ffffc0000840ffff88810004cc8000000000000000000000000000000001
[ 19.496451] raw: ffff888829e60c00000000008020001800000001ffffffff0000000000000000
[ 19.497906] head: 0057ffffc0000840ffff88810004cc8000000000000000000000000000000001
[ 19.499379] head: ffff888829e60c00000000008020001800000001ffffffff0000000000000000
[ 19.500844] head: 0057ffffc0000003ffffea0020a79801ffffea0020a7984800000000ffffffff
[ 19.502316] head: 0000000800000000000000000000000000000000ffffffff0000000000000000
[ 19.503784] page dumped because: kasan: bad access detected
[ 19.505058]
[ 19.505970] Memory state around the buggy address:
[ 19.507172] ffff888829e65100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 19.508599] ffff888829e65180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 19.510013] >ffff888829e65200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 19.510014] ^
[ 19.510016] ffff888829e65280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 19.510018] ffff888829e65300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 19.515367] ==================================================================
The reason for this error is physical_package_ids assigned by VMware VMM
are not continuous and have gaps. This will cause value returned by
topology_physical_package_id() to be more than topology_max_packages().
Here the allocation uses topology_max_packages(). The call to
topology_max_packages() returns maximum logical package ID not physical
ID. Hence use topology_logical_package_id() instead of
topology_physical_package_id().
Fixes: 9a1aac8a96dc ("platform/x86: ISST: PUNIT device mapping with Sub-NUMA clustering") Cc: stable@vger.kernel.org Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zach Wade <zachwade.k@gmail.com> Link: https://lore.kernel.org/r/20240923144508.1764-1-zachwade.k@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Bjorn Andersson [Fri, 4 Oct 2024 23:11:01 +0000 (16:11 -0700)]
iio: adc: qcom-spmi-adc5: Tidy up adc5_get_fw_data() error messages
In the event that no channels (child nodes) are defined, the adc5 driver
will provide a generic error message indicating that adc5_get_fw_data()
returned -EINVAL. In all other error cases we get two error messages,
one helpful and the generic one.
Add a specific error message for the no channels case, and drop the
generic one, in order to improve the generates log prints in both cases.
Javier Carrasco [Sun, 29 Sep 2024 20:38:46 +0000 (22:38 +0200)]
iio: light: veml6070: add action for i2c_unregister_device
Simplify the code by adding an action to call i2c_unregister_device(),
which removes the need for a 'fail' label, gotos to it, and an explicit
call in veml6070_remove().
Javier Carrasco [Thu, 26 Sep 2024 16:08:40 +0000 (18:08 +0200)]
iio: adc: ad5755: use scoped device_for_each_child_node()
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error path, in
this particular case dropping the jump to error_out as well.
This prevents possible memory leaks if new error paths are added without
the required call to fwnode_handle_put().
iio: adc: ti-ads1119: Drop explicit initialization of struct i2c_device_id::driver_data to 0
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
iio: light: ltr390: Add interrupt persistance support
Added support to configure the threshold interrupt persistance value by
providing IIO_EV_INFO_PERIOD attribute. The value written to the
attribute should be in miliseconds and should be greater than the
sampling rate of the sensor.