Jakub Kicinski [Mon, 11 Aug 2025 23:42:12 +0000 (16:42 -0700)]
selftests: drv-net: add test for RSS on flow label
Add a simple test for checking that RSS on flow label works,
and that its rejected for IPv4 flows.
# ./tools/testing/selftests/drivers/net/hw/rss_flow_label.py
TAP version 13
1..2
ok 1 rss_flow_label.test_rss_flow_label
ok 2 rss_flow_label.test_rss_flow_label_6only
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Jakub Kicinski [Mon, 11 Aug 2025 23:42:10 +0000 (16:42 -0700)]
eth: fbnic: support RSS on IPv6 Flow Label
Support IPv6 Flow Label hashing. Use both inner and outer IPv6
header's Flow Label if both headers are detected. Flow Label
is unlike normal header fields, by enabling it user accepts
the unstable hash and possible reordering. Because of that
I think it's reasonable to hash over all Flow Labels we can
find, even tho we don't hash over all L3 addresses.
Jakub Kicinski [Mon, 11 Aug 2025 23:42:09 +0000 (16:42 -0700)]
net: ethtool: support including Flow Label in the flow hash for RSS
Some modern NICs support including the IPv6 Flow Label in
the flow hash for RSS queue selection. This is outside
the old "Microsoft spec", but was included in the OCP NIC spec:
[ ] RSS include flow label in the hash (configurable)
RSS Flow Label hashing allows TCP Protective Load Balancing (PLB)
to recover from receiver congestion / overload.
Rx CPU/queue hotspots are relatively common for data ingest
workloads, and so far we had to try to detect the condition
at the RPC layer and reopen the connection. PLB lets us change
the Flow Label and therefore Rx CPU on RTO, with minimal packet
reordering. PLB reaction times are much faster, and can happen
at any point in the connection, not just at RPC boundaries.
Due to the nature of host processing (relatively long queues,
other kernel subsystems masking IRQs for 100s of msecs)
the risk of reordering within the host is higher than in
the network. But for applications which need it - it is far
preferable to potentially persistent overload of subset of
queues.
It is expected that the hash communicated to the host
may change if the Flow Label changes. This may be surprising
to some host software, but I don't expect the devices
can compute two Toeplitz hashes, one with the Flow Label
for queue selection and one without for the rx hash
communicated to the host. Besides, changing the hash
may potentially help to change the path thru host queues.
User can disable NETIF_F_RXHASH if they require a stable
flow hash.
The name RXH_IP6_FL was chosen based on what we call
Flow Label variables in IPv6 processing (fl). I prefer
fl_lbl but that appears to be an fbnic-only spelling.
We could spell out RXH_IP6_FLOW_LABEL but existing
RXH_ defines are a lot more terse.
Willem notes [1] that Flow Label is defined as identifying the flow
and therefore including both the flow label _and_ the L4 header
fields is not generally necessary. But it should not hurt so
it's not explicitly prevented if the driver supports hashing
on both at the same time.
====================
net: Don't use %pK through printk or tracepoints
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
There are still a few users of %pK left, but these use it through seq_file,
for which its usage is safe.
====================
Thomas Weißschuh [Mon, 11 Aug 2025 09:43:19 +0000 (11:43 +0200)]
net/mlx5: Don't use %pK through tracepoints
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through tracepoints. They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
There are still a few users of %pK left, but these use it through seq_file,
for which its usage is safe.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250811-restricted-pointers-net-v5-2-2e2fdc7d3f2c@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Thomas Weißschuh [Mon, 11 Aug 2025 09:43:18 +0000 (11:43 +0200)]
ice: Don't use %pK through printk or tracepoints
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
There are still a few users of %pK left, but these use it through seq_file,
for which its usage is safe.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Acked-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250811-restricted-pointers-net-v5-1-2e2fdc7d3f2c@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Waqar Hameed [Tue, 12 Aug 2025 12:13:58 +0000 (14:13 +0200)]
net: enetc: Remove error print for devm_add_action_or_reset()
When `devm_add_action_or_reset()` fails, it is due to a failed memory
allocation and will thus return `-ENOMEM`. `dev_err_probe()` doesn't do
anything when error is `-ENOMEM`. Therefore, remove the useless call to
`dev_err_probe()` when `devm_add_action_or_reset()` fails, and just
return the value instead.
Miguel García [Tue, 12 Aug 2025 08:22:44 +0000 (10:22 +0200)]
tun: replace strcpy with strscpy for ifr_name
Replace the strcpy() calls that copy the device name into ifr->ifr_name
with strscpy() to avoid potential overflows and guarantee NULL termination.
Destination is ifr->ifr_name (size IFNAMSIZ).
Tested in QEMU (BusyBox rootfs):
- Created TUN devices via TUNSETIFF helper
- Set addresses and brought links up
- Verified long interface names are safely truncated (IFNAMSIZ-1)
Lorenzo Bianconi [Tue, 12 Aug 2025 04:57:23 +0000 (06:57 +0200)]
net: mediatek: wed: Introduce MT7992 WED support to MT7988 SoC
Introduce the second WDMA RX ring in WED driver for MT7988 SoC since the
Mediatek MT7992 WiFi chipset supports two separated WDMA rings.
Add missing MT7988 configurations to properly support WED for MT7992 in
MT76 driver.
Wang Liang [Tue, 12 Aug 2025 01:59:29 +0000 (09:59 +0800)]
vsock: use sizeof(struct sockaddr_storage) instead of magic value
Previous commit 230b183921ec ("net: Use standard structures for generic
socket address structures.") use 'struct sockaddr_storage address;'
to replace 'char address[MAX_SOCK_ADDR];'.
The macro MAX_SOCK_ADDR is removed by commit 01893c82b4e6 ("net: Remove
MAX_SOCK_ADDR constant").
The comment in vsock_getname() is outdated, use sizeof(struct
sockaddr_storage) instead of magic value 128.
Tiezhu Yang [Mon, 11 Aug 2025 07:35:06 +0000 (15:35 +0800)]
net: stmmac: Return early if invalid in loongson_dwmac_fix_reset()
If the MAC controller does not connect to any PHY interface, there is a
missing clock, then the DMA reset fails.
For this case, the DMA_BUS_MODE_SFT_RESET bit is 1 before software reset,
just print an error message which gives a hint the PHY clock is missing,
and then return -EINVAL immediately to avoid waiting for the timeout when
the DMA reset fails in loongson_dwmac_fix_reset().
With this patch, for the normal end user, the computer start faster with
reducing boot time for 2 seconds on the specified mainboard.
Tiezhu Yang [Mon, 11 Aug 2025 07:35:05 +0000 (15:35 +0800)]
net: stmmac: Change first parameter of fix_soc_reset()
In order to use netdev_err() to print message in the callback function of
fix_soc_reset(), change fix_soc_reset() to have "struct stmmac_priv *" as
its first parameter.
This is preparation for later patch, no functionality change.
Tiezhu Yang [Mon, 11 Aug 2025 07:35:04 +0000 (15:35 +0800)]
net: stmmac: Check stmmac_hw_setup() in stmmac_resume()
stmmac_hw_setup() may return 0 on success and an appropriate negative
integer as defined in errno.h file on failure, just check it and then
return early if failed in stmmac_resume().
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Link: https://patch.msgid.link/20250811073506.27513-2-yangtiezhu@loongson.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
net: airoha: Introduce NPU callbacks for wlan offloading
Similar to wired traffic, EN7581 SoC allows to offload traffic to/from
the MT76 wireless NIC configuring the NPU module via the Netfilter
flowtable. This series introduces the necessary NPU callback used by
the MT7996 driver in order to enable the offloading.
MT76 support has been posted as RFC in [0] in order to show how the
APIs are consumed.
====================
Lorenzo Bianconi [Mon, 11 Aug 2025 15:31:40 +0000 (17:31 +0200)]
net: airoha: npu: Read NPU wlan interrupt lines from the DTS
Read all NPU wlan IRQ lines from the NPU device-tree node.
NPU module fires wlan irq lines when the traffic to/from the WiFi NIC is
not hw accelerated (these interrupts will be consumed by the MT76 driver
in subsequent patches).
This is a preliminary patch to enable wlan flowtable offload for EN7581
SoC.
Introduce callbacks used by the MT76 driver to configure NPU SoC
interrupts. This is a preliminary patch to enable wlan flowtable
offload for EN7581 SoC with MT76 driver.
Introduce wlan_send_msg() and wlan_get_msg() NPU wlan callbacks used
by the wlan driver (MT76) to initialize NPU module registers in order to
offload wireless-wired traffic.
This is a preliminary patch to enable wlan flowtable offload for EN7581
SoC with MT76 driver.
Introduce wlan_init_reserved_memory callback used by MT76 driver during
NPU wlan offloading setup.
This is a preliminary patch to enable wlan flowtable offload for EN7581
SoC with MT76 driver.
Lorenzo Bianconi [Mon, 11 Aug 2025 15:31:36 +0000 (17:31 +0200)]
dt-bindings: net: airoha: npu: Add memory regions used for wlan offload
Document memory regions used by Airoha EN7581 NPU for wlan traffic
offloading. The brand new added memory regions do not introduce any
backward compatibility issues since they will be used just to offload
traffic to/from the MT76 wireless NIC and the MT76 probing will not fail
if these memory regions are not provide, it will just disable offloading
via the NPU module.
A few tweaks to the devmem test to make it more "NIPA-compatible".
We still need a fix to make sure that the test sets hds threshold
to 0. Taehee is presumably already/still working on that:
https://lore.kernel.org/20250702104249.1665034-1-ap420073@gmail.com
so I'm not including my version.
# ./tools/testing/selftests/drivers/net/hw/devmem.py
TAP version 13
1..3
ok 1 devmem.check_rx
ok 2 devmem.check_tx
ok 3 devmem.check_tx_chunks
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
====================
Jakub Kicinski [Mon, 11 Aug 2025 23:13:34 +0000 (16:13 -0700)]
selftests: drv-net: devmem: flip the direction of Tx tests
The Device Under Test should always be the local system.
While the Rx test gets this right the Tx test is sending
from remote to local. So Tx of DMABUF memory happens on remote.
These tests never run in NIPA since we don't have a compatible
device so we haven't caught this.
Jakub Kicinski [Mon, 11 Aug 2025 23:13:33 +0000 (16:13 -0700)]
selftests: net: terminate bkg() commands on exception
There is a number of:
with bkg("socat ..LISTEN..", exit_wait=True)
uses in the tests. If whatever is supposed to send the traffic
fails we will get stuck in the bkg(). Try to kill the process
in case of exception, to avoid the long wait.
A specific example where this happens is the devmem Tx tests.
Jakub Kicinski [Mon, 11 Aug 2025 23:13:31 +0000 (16:13 -0700)]
selftests: drv-net: devmem: remove sudo from system() calls
The general expectations for network HW selftests is that they
will be run as root. sudo doesn't seem to work on NIPA VMs.
While it's probably something solvable in the setup I think we should
remove the sudos. devmem is the only networking test using sudo.
Jakub Kicinski [Mon, 11 Aug 2025 23:13:30 +0000 (16:13 -0700)]
selftests: drv-net: add configs for zerocopy Rx
Looks like neither IO_URING nor UDMABUF are enabled even tho
iou-zcrx.py and devmem.py (respectively) need those.
IO_URING gets enabled by default but UDMABUF is missing.
This series improves the stmmac suspend/resume architecture by
providing a couple of method hooks in struct plat_stmmacenet_data which
are called by core code, and thus are available for any of the
platform glue drivers, whether using a platform or PCI device.
As these methods are called by core code, we can also provide a simple
PM ops structure also in the core code for converted glue drivers to
use.
The remainder of the patches convert the various drivers.
====================
Russell King (Oracle) [Mon, 11 Aug 2025 18:51:24 +0000 (19:51 +0100)]
net: stmmac: mediatek: convert to resume() method
Convert mediatek to use the resume() platform method rather than the
init() platform method as mediatek_dwmac_init() is only called from
the resume paths.
This will ensure that in a future commit, mediatek_dwmac_init() won't
be called when probing the main part of the stmmac driver.
Russell King (Oracle) [Mon, 11 Aug 2025 18:51:19 +0000 (19:51 +0100)]
net: stmmac: stm32: convert to suspend()/resume() methods
Convert stm32 to use the new suspend() and resume() methods rather
than implementing these in custom wrappers around the main driver's
suspend/resume methods. This allows this driver to use the stmmac
simple PM ops structure.
Russell King (Oracle) [Mon, 11 Aug 2025 18:51:14 +0000 (19:51 +0100)]
net: stmmac: rk: convert to suspend()/resume() methods
Convert rk to use the new suspend() and resume() methods rather than
implementing these in custom wrappers around the main driver's
suspend/resume methods. This allows this driver to use the simmac
simple PM ops structure.
We can further simplify the driver as there is no need to track whether
the device was suspended, we only need to check whether the device is
wakeup capable in the resume method. This is because the resume method
will only be called after the suspend method.
Russell King (Oracle) [Mon, 11 Aug 2025 18:51:09 +0000 (19:51 +0100)]
net: stmmac: pci: convert to suspend()/resume() methods
Convert pci to use the new suspend() and resume() methods rather
than implementing these in custom wrappers around the main driver's
suspend/resume methods.
Russell King (Oracle) [Mon, 11 Aug 2025 18:51:04 +0000 (19:51 +0100)]
net: stmmac: loongson: convert to suspend()/resume() methods
Convert loongson to use the new suspend() and resume() methods rather
than implementing these in custom wrappers around the main driver's
suspend/resume methods. This allows this driver to use the stmmac
simple PM ops structure.
Russell King (Oracle) [Mon, 11 Aug 2025 18:50:58 +0000 (19:50 +0100)]
net: stmmac: intel: convert to suspend()/resume() methods
Convert intel to use the new suspend() and resume() methods rather
than implementing these in custom wrappers around the main driver's
suspend/resume methods. This allows this driver to use the stmmac
simple PM ops structure.
Russell King (Oracle) [Mon, 11 Aug 2025 18:50:53 +0000 (19:50 +0100)]
net: stmmac: platform: legacy hooks for suspend()/resume() methods
Add legacy hooks for the suspend() and resume() methods to forward
these calls to the init() and exit() methods when the platform code
hasn't populated the two former methods. This allows us to get rid
of stmmac_pltfr_suspend() and stmmac_pltfr_resume().
Russell King (Oracle) [Mon, 11 Aug 2025 18:50:43 +0000 (19:50 +0100)]
net: stmmac: add suspend()/resume() platform ops
Add suspend/resume platform operations, which, when populated, override
the init/exit platform operations when we suspend and resume. These
suspend()/resume() methods are called by core code, and thus are
designed to support any struct device, not just platform devices. This
allows them to be used by the PCI drivers we have.
Kuniyuki Iwashima [Mon, 11 Aug 2025 21:53:06 +0000 (21:53 +0000)]
selftest: af_unix: Silence -Wflex-array-member-not-at-end warning for scm_rights.c.
scm_rights.c has no problem in functionality, but when compiled with
-Wflex-array-member-not-at-end, it shows this warning:
scm_rights.c: In function ‘__send_fd’:
scm_rights.c:275:32: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
275 | struct cmsghdr cmsghdr;
| ^~~~~~~
Kuniyuki Iwashima [Mon, 11 Aug 2025 21:53:05 +0000 (21:53 +0000)]
selftest: af_unix: Silence -Wflex-array-member-not-at-end warning for scm_inq.c.
scm_inq.c has no problem in functionality, but when compiled with
-Wflex-array-member-not-at-end, it shows this warning:
scm_inq.c:15:24: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
15 | struct cmsghdr cmsghdr;
| ^~~~~~~
====================
netconsole: reuse netpoll_parse_ip_addr in configfs helpers
This patchset refactors the IP address parsing logic in the netconsole
driver to eliminate code duplication and improve maintainability. The
changes centralize IPv4 and IPv6 address parsing into a single function
(netpoll_parse_ip_addr). For that, it needs to teach
netpoll_parse_ip_addr() to handle strings with newlines, which is the
type of string coming from configfs.
Background
The netconsole driver currently has duplicate IP address parsing logic
in both local_ip_store() and remote_ip_store() functions. This
duplication increases the risk of inconsistencies and makes the code
harder to maintain.
Benefits
* Reduced code duplication: ~40 lines of duplicate parsing logic
eliminated
* Improved robustness: Centralized parsing reduces the chance
of inconsistencies
* Easier to maintain: Code follow more the netdev way
Breno Leitao [Mon, 11 Aug 2025 18:13:27 +0000 (11:13 -0700)]
netconsole: use netpoll_parse_ip_addr in local_ip_store
Replace manual IP address parsing with a call to netpoll_parse_ip_addr
in local_ip_store(), simplifying the code and reducing the chance of
errors.
Also, remove the pr_err() if the user enters an invalid value in
configfs entries. pr_err() is not the best way to alert user that the
configuration is invalid.
Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Breno Leitao [Mon, 11 Aug 2025 18:13:26 +0000 (11:13 -0700)]
netconsole: add support for strings with new line in netpoll_parse_ip_addr
The current IP address parsing logic fails when the input string
contains a trailing newline character. This can occur when IP
addresses are provided through configfs, which contains newlines in
a const buffer.
Teach netpoll_parse_ip_addr() how to ignore newlines at the end of the
IPs. Also, simplify the code by:
* No need to check for separators. Try to parse ipv4, if it fails try
ipv6 similarly to ceph_pton()
* If ipv6 is not supported, don't call in6_pton() at all.
Breno Leitao [Mon, 11 Aug 2025 18:13:25 +0000 (11:13 -0700)]
netconsole: move netpoll_parse_ip_addr() earlier for reuse
Move netpoll_parse_ip_addr() earlier in the file to be reused in
other functions, such as local_ip_store(). This avoids duplicate
address parsing logic and centralizes validation for both IPv4
and IPv6 string input.
In light of a81649a4efd3 ("net: mdio: mdio-bcm-unimac: Correct rate
fallback logic"), it became clear that the warning should be specific to
the MDIO controller instance, and there should be further information
provided to indicate what is wrong, whether the requested clock
frequency or the rate calculation. Clarify the message accordingly.
Colin Ian King [Mon, 11 Aug 2025 11:12:11 +0000 (12:12 +0100)]
net: stmmac: make variable data a u32
Make data a u32 instead of an unsigned long, this way it is
explicitly the same width as the operations performed on it
and the same width as a writel store, and it cleans up sign
extention warnings when 64 bit static analysis is performed
on the code.
Thorsten Blum [Mon, 11 Aug 2025 09:34:40 +0000 (11:34 +0200)]
caif: Replace memset(0) + strscpy() with strscpy_pad()
Replace memset(0) followed by strscpy() with strscpy_pad() to improve
cfctrl_linkup_request(). This avoids zeroing the memory before copying
the string and ensures the destination buffer is only written to once,
simplifying the code and improving efficiency.
Commit 16f5dfbc851b ("gfp: include __GFP_NOWARN in GFP_NOWAIT") made
GFP_NOWAIT implicitly include __GFP_NOWARN.
Therefore, explicit __GFP_NOWARN combined with GFP_NOWAIT (e.g.,
`GFP_NOWAIT | __GFP_NOWARN`) is now redundant. Let's clean up these
redundant flags across subsystems.
Wake Liu [Sat, 9 Aug 2025 06:20:13 +0000 (14:20 +0800)]
selftests/net: Ensure assert() triggers in psock_tpacket.c
The get_next_frame() function in psock_tpacket.c was missing a return
statement in its default switch case, leading to a compiler warning.
This was caused by a `bug_on(1)` call, which is defined as an
`assert()`, being compiled out because NDEBUG is defined during the
build.
Instead of adding a `return NULL;` which would silently hide the error
and could lead to crashes later, this change restores the original
author's intent. By adding `#undef NDEBUG` before including <assert.h>,
we ensure the assertion is active and will cause the test to abort if
this unreachable code is ever executed.
Wake Liu [Thu, 7 Aug 2025 08:09:32 +0000 (16:09 +0800)]
selftests/net: Replace non-standard __WORDSIZE with sizeof(long) * 8
The `__WORDSIZE` macro, defined in the non-standard `<bits/wordsize.h>`
header, is a GNU extension and not universally available with all
toolchains, such as Clang when used with musl libc.
This can lead to build failures in environments where this header is
missing.
The intention of the code is to determine the bit width of a C `long`.
Replace the non-portable `__WORDSIZE` with the standard and portable
`sizeof(long) * 8` expression to achieve the same result.
This change also removes the inclusion of the now-unused
`<bits/wordsize.h>` header.
Signed-off-by: Wake Liu <wakel@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- net: drop UFO packets (injected via virtio) in udp_rcv_segment()
- eth: mlx5: correctly set gso_segs when LRO is used, avoid false
positive checksum validation errors
- netpoll: prevent hanging NAPI when netcons gets enabled
- phy: mscc: fix parsing of unicast frames for PTP timestamping
- a number of device tree / OF reference leak fixes"
* tag 'net-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
pptp: fix pptp_xmit() error path
net: ti: icssg-prueth: Fix skb handling for XDP_PASS
net: Update threaded state in napi config in netif_set_threaded
selftests: netdevsim: Xfail nexthop test on slow machines
eth: fbnic: Lock the tx_dropped update
eth: fbnic: Fix tx_dropped reporting
eth: fbnic: remove the debugging trick of super high page bias
net: ftgmac100: fix potential NULL pointer access in ftgmac100_phy_disconnect
dt-bindings: net: Replace bouncing Alexandru Tachici emails
dpll: zl3073x: ZL3073X_I2C and ZL3073X_SPI should depend on NET
net/sched: mqprio: fix stack out-of-bounds write in tc entry parsing
Revert "net: mdio_bus: Use devm for getting reset GPIO"
selftests: net: packetdrill: xfail all problems on slow machines
net/packet: fix a race in packet_set_ring() and packet_notifier()
benet: fix BUG when creating VFs
net: airoha: npu: Add missing MODULE_FIRMWARE macros
net: devmem: fix DMA direction on unmapping
ipa: fix compile-testing with qcom-mdt=m
eth: fbnic: unlink NAPIs from queues on error to open
net: Add locking to protect skb->dev access in ip_output
...
Linus Torvalds [Fri, 8 Aug 2025 03:56:55 +0000 (06:56 +0300)]
Merge tag 's390-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- Support MMIO read/write tracing
- Enable THP swapping and THP migration
- Unmask SLCF bit ("stateless command filtering") introduced with CEX8
cards, so that user space applications like lszcrypt could evaluate
and list this feature
- Fix the value of high_memory variable, so it considers possible
tailing offline memory blocks
- Make vmem_pte_alloc() consistent and always allocate memory of
PAGE_SIZE for page tables. This ensures a page table occupies the
whole page, as the rest of the code assumes
- Fix kernel image end address in the decompressor debug output
- Fix a typo in debug_sprintf_format_fn() comment
* tag 's390-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/debug: Fix typo in debug_sprintf_format_fn() comment
s390/boot: Fix startup debugging log
s390/mm: Allocate page table with PAGE_SIZE granularity
s390/mm: Enable THP_SWAP and THP_MIGRATION
s390: Support CONFIG_TRACE_MMIO_ACCESS
s390/mm: Set high_memory at the end of the identity mapping
s390/ap: Unmask SLCF bit in card and queue ap functions sysfs
Linus Torvalds [Fri, 8 Aug 2025 03:48:14 +0000 (06:48 +0300)]
Merge tag 'drm-next-2025-08-08' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"This is the fixes that built up in the merge window, mostly amdgpu and
xe with one i915 display fix, seems like things are pretty good for
rc1.
i915:
- DP LPFS fixes
xe:
- SRIOV: PF fixes and removal of need of module param
- Fix driver unbind around Devcoredump
- Mark xe driver as BROKEN if kernel page size is not 4kB
* tag 'drm-next-2025-08-08' of https://gitlab.freedesktop.org/drm/kernel: (28 commits)
drm/amdgpu: add missing vram lost check for LEGACY RESET
drm/amdgpu/discovery: fix fw based ip discovery
drm/amdkfd: Destroy KFD debugfs after destroy KFD wq
amdgpu/amdgpu_discovery: increase timeout limit for IFWI init
drm/amdgpu: Update SDMA firmware version check for user queue support
drm/amdgpu: Add NULL check for asic_funcs
drm/amd/display: Revert "drm/amd/display: Fix AMDGPU_MAX_BL_LEVEL value"
drm/amd/display: fix a Null pointer dereference vulnerability
drm/amd/display: Add primary plane to commits for correct VRR handling
drm/amdgpu: update mmhub 3.3 client id mappings
drm/amdgpu: update mmhub 3.0.1 client id mappings
drm/amdgpu: Retain job->vm in amdgpu_job_prepare_job
drm/amd/display: Fix DCE 6.0 and 6.4 PLL programming.
drm/amd/display: Don't overwrite dce60_clk_mgr
drm/amdkfd: Fix checkpoint-restore on multi-xcc
drm/amd: Restore cached manual clock settings during resume
drm/amd: Restore cached power limit during resume
drm/amdgpu: Update external revid for GC v9.5.0
drm/amdgpu: Update supported modes for GC v9.5.0
Mark xe driver as BROKEN if kernel page size is not 4kB
...
Linus Torvalds [Fri, 8 Aug 2025 03:43:20 +0000 (06:43 +0300)]
Merge tag 'fbdev-for-6.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes for 6.17-rc1:
- Revert a patch which broke VGA console
- Fix an out-of-bounds access bug which may happen during console
resizing when a console is mapped to a frame buffer
* tag 'fbdev-for-6.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
Revert "vgacon: Add check for vc_origin address range in vgacon_scroll()"
fbdev: Fix vmalloc out-of-bounds write in fast_imageblit
Linus Torvalds [Fri, 8 Aug 2025 03:36:48 +0000 (06:36 +0300)]
Merge tag 'loongarch-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Complete KSave registers definition
- Support the mem=<size> kernel parameter
- Support BPF dynamic modification & trampoline
- Add MMC/SDIO controller nodes in dts
- Some bug fixes and other small changes
* tag 'loongarch-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: vDSO: Remove -nostdlib complier flag
LoongArch: dts: Add eMMC/SDIO controller support to Loongson-2K2000
LoongArch: dts: Add SDIO controller support to Loongson-2K1000
LoongArch: dts: Add SDIO controller support to Loongson-2K0500
LoongArch: BPF: Set bpf_jit_bypass_spec_v1/v4()
LoongArch: BPF: Fix the tailcall hierarchy
LoongArch: BPF: Fix jump offset calculation in tailcall
LoongArch: BPF: Add struct ops support for trampoline
LoongArch: BPF: Add basic bpf trampoline support
LoongArch: BPF: Add dynamic code modification support
LoongArch: BPF: Rename and refactor validate_code()
LoongArch: Add larch_insn_gen_{beq,bne} helpers
LoongArch: Don't use %pK through printk() in unwinder
LoongArch: Avoid in-place string operation on FDT content
LoongArch: Support mem=<size> kernel parameter
LoongArch: Make relocate_new_kernel_size be a .quad value
LoongArch: Complete KSave registers definition
Dave Airlie [Thu, 7 Aug 2025 19:50:02 +0000 (05:50 +1000)]
Merge tag 'drm-xe-next-fixes-2025-08-06' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
- SRIOV: PF fixes and removal of need of module param (Michal)
- Fix driver unbind around Devcoredump (Bala)
- Mark xe driver as BROKEN if kernel page size is not 4kB (Simon)
Linus Torvalds [Thu, 7 Aug 2025 04:40:01 +0000 (07:40 +0300)]
Merge tag 'input-for-v6.17-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- updates to several drivers consuming GPIO APIs to use setters
returning error codes
- an infrastructure allowing to define "overlays" for touchscreens
carving out regions implementing buttons and other elements from a
bigger sensors and a corresponding update to st1232 driver
- an update to AT/PS2 keyboard driver to map F13-F24 by default
- Samsung keypad driver got a facelift
- evdev input handler will now bind to all devices using EV_SYN event
instead of abusing id->driver_info
- two new sub-drivers implementing 1A (capacitive buttons) and 21
(forcepad button) functions in Synaptics RMI driver
- support for polling mode in Goodix touchscreen driver
- support for support for FocalTech FT8716 in edt-ft5x06 driver
- support for MT6359 in mtk-pmic-keys driver
- removal of pcf50633-input driver since platform it was used on is
gone
- new definitions for game controller "grip" buttons (BTN_GRIP*) and
corresponding changes to xpad and hid-steam controller drivers
- a new definition for "performance" key
* tag 'input-for-v6.17-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (38 commits)
HID: hid-steam: Use new BTN_GRIP* buttons
Input: add keycode for performance mode key
Input: max77693 - convert to atomic pwm operation
Input: st1232 - add touch-overlay handling
dt-bindings: input: touchscreen: st1232: add touch-overlay example
Input: touch-overlay - add touchscreen overlay handling
dt-bindings: touchscreen: add touch-overlay property
Input: atkbd - correctly map F13 - F24
Input: xpad - use new BTN_GRIP* buttons
Input: Add and document BTN_GRIP*
Input: xpad - change buttons the D-Pad gets mapped as to BTN_DPAD_*
Documentation: Fix capitalization of XBox -> Xbox
Input: synaptics-rmi4 - add support for F1A
dt-bindings: input: syna,rmi4: Document F1A function
Input: synaptics-rmi4 - add support for Forcepads (F21)
Input: mtk-pmic-keys - add support for MT6359 PMIC keys
Input: remove special handling of id->driver_info when matching
Input: evdev - switch matching to EV_SYN
Input: samsung-keypad - use BIT() and GENMASK() where appropriate
Input: samsung-keypad - use per-chip parameters
...
Linus Torvalds [Thu, 7 Aug 2025 04:38:25 +0000 (07:38 +0300)]
Merge tag 'for-linus-6.17-1' of https://github.com/cminyard/linux-ipmi
Pull ipmi updates from Corey Minyard:
"Some small fixes for the IPMI driver
Nothing huge, some rate limiting on logs, a strncpy fix where the
source and destination could be the same, and removal of some unused
cruft"
* tag 'for-linus-6.17-1' of https://github.com/cminyard/linux-ipmi:
ipmi: Use dev_warn_ratelimited() for incorrect message warnings
char: ipmi: remove redundant variable 'type' and check
ipmi: Fix strcpy source and destination the same
Linus Torvalds [Thu, 7 Aug 2025 04:36:23 +0000 (07:36 +0300)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fix from Jason Gunthorpe:
"Single fix to correct the iov_iter construction in soft iwarp. This
avoids blktest crashes with recent changes to the allocators"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/siw: Fix the sendmsg byte count in siw_tcp_sendpages
Linus Torvalds [Thu, 7 Aug 2025 04:32:50 +0000 (07:32 +0300)]
Merge tag 'vfio-v6.17-rc1-v2' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Fix imbalance where the no-iommu/cdev device path skips too much on
open, failing to increment a reference, but still decrements the
reference on close. Add bounds checking to prevent such underflows
(Jacob Pan)
- Fill missing detach_ioas op for pds_vfio_pci, fixing probe failure
when used with IOMMUFD (Brett Creeley)
- Split SR-IOV VFs to separate dev_set, avoiding unnecessary
serialization between VFs that appear on the same bus (Alex
Williamson)
- Fix a theoretical integer overflow is the mlx5-vfio-pci variant
driver (Artem Sadovnikov)
- Implement missing VF token checking support via vfio cdev/IOMMUFD
interface (Jason Gunthorpe)
- Add a cond_resched() call to avoid holding the CPU too long during
DMA mapping operations (Keith Busch)
* tag 'vfio-v6.17-rc1-v2' of https://github.com/awilliam/linux-vfio:
vfio/type1: conditional rescheduling while pinning
vfio/qat: add support for intel QAT 6xxx virtual functions
vfio/qat: Remove myself from VFIO QAT PCI driver maintainers
vfio/pci: Do vf_token checks for VFIO_DEVICE_BIND_IOMMUFD
vfio/mlx5: fix possible overflow in tracking max message size
vfio/pci: Separate SR-IOV VF dev_set
vfio/pds: Fix missing detach_ioas op
vfio: Prevent open_count decrement to negative
vfio: Fix unbalanced vfio_df_close call in no-iommu mode
Alex Deucher [Wed, 30 Jul 2025 15:16:05 +0000 (11:16 -0400)]
drm/amdgpu/discovery: fix fw based ip discovery
We only need the fw based discovery table for sysfs. No
need to parse it. Additionally parsing some of the board
specific tables may result in incorrect data on some boards.
just load the binary and don't parse it on those boards.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4441 Fixes: 80a0e8282933 ("drm/amdgpu/discovery: optionally use fw based ip discovery") Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 62eedd150fa11aefc2d377fc746633fdb1baeb55) Cc: stable@vger.kernel.org
Amber Lin [Fri, 1 Aug 2025 00:45:00 +0000 (20:45 -0400)]
drm/amdkfd: Destroy KFD debugfs after destroy KFD wq
Since KFD proc content was moved to kernel debugfs, we can't destroy KFD
debugfs before kfd_process_destroy_wq. Move kfd_process_destroy_wq prior
to kfd_debugfs_fini to fix a kernel NULL pointer problem. It happens
when /sys/kernel/debug/kfd was already destroyed in kfd_debugfs_fini but
kfd_process_destroy_wq calls kfd_debugfs_remove_process. This line
debugfs_remove_recursive(entry->proc_dentry);
tries to remove /sys/kernel/debug/kfd/proc/<pid> while
/sys/kernel/debug/kfd is already gone. It hangs the kernel by kernel
NULL pointer.
Signed-off-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Eric Huang <jinhuieric.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0333052d90683d88531558dcfdbf2525cc37c233) Cc: stable@vger.kernel.org
Linus Torvalds [Wed, 6 Aug 2025 12:52:56 +0000 (15:52 +0300)]
Merge tag 'for-6.17-fix-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"A single btrfs commit. It fixes a problem that people started to hit
since 6.15.3 during log replay (e.g. after a crash).
The bug is old but got more likely to happen since commit 5e85262e542d ("btrfs: fix fsync of files with no hard links not
persisting deletion") got backported to stable (6.15 only)"
* tag 'for-6.17-fix-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix log tree replay failure due to file with 0 links and extents
Linus Torvalds [Wed, 6 Aug 2025 12:44:25 +0000 (15:44 +0300)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This is mostly fixes and cleanups and code reworks that trickled in
across the merge window and the weeks leading up. The only substantive
update is the Mediatek ufs driver which accounts for the bulk of the
additions"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (37 commits)
scsi: libsas: Use a bool for sas_deform_port() second argument
scsi: libsas: Move declarations of internal functions to sas_internal.h
scsi: libsas: Make sas_get_ata_info() static
scsi: libsas: Simplify sas_ata_wait_eh()
scsi: libsas: Refactor dev_is_sata()
scsi: sd: Make sd shutdown issue START STOP UNIT appropriately
scsi: arm64: dts: mediatek: mt8195: Add UFSHCI node
scsi: dt-bindings: mediatek,ufs: add MT8195 compatible and update clock nodes
scsi: dt-bindings: mediatek,ufs: Add ufs-disable-mcq flag for UFS host
scsi: ufs: ufs-mediatek: Add UFS host support for MT8195 SoC
scsi: ufs: ufs-pci: Remove control of UIC Completion interrupt for Intel MTL
scsi: ufs: core: Do not write interrupt enable register unnecessarily
scsi: ufs: core: Set and clear UIC Completion interrupt as needed
scsi: ufs: core: Remove duplicated code in ufshcd_send_bsg_uic_cmd()
scsi: ufs: core: Move ufshcd_enable_intr() and ufshcd_disable_intr()
scsi: ufs: ufs-pci: Remove UFS PCI driver's ->late_init() call back
scsi: ufs: ufs-pci: Fix default runtime and system PM levels
scsi: ufs: ufs-pci: Fix hibernate state transition for Intel MTL-like host controllers
scsi: ufs: host: mediatek: Support FDE (AES) clock scaling
scsi: ufs: host: mediatek: Support clock scaling with Vcore binding
...
Filipe Manana [Wed, 30 Jul 2025 18:18:37 +0000 (19:18 +0100)]
btrfs: fix log tree replay failure due to file with 0 links and extents
If we log a new inode (not persisted in a past transaction) that has 0
links and extents, then log another inode with an higher inode number, we
end up with failing to replay the log tree with -EINVAL. The steps for
this are:
1) create new file A
2) write some data to file A
3) open an fd on file A
4) unlink file A
5) fsync file A using the previously open fd
6) create file B (has higher inode number than file A)
7) fsync file B
8) power fail before current transaction commits
Now when attempting to mount the fs, the log replay will fail with
-ENOENT at replay_one_extent() when attempting to replay the first
extent of file A. The failure comes when trying to open the inode for
file A in the subvolume tree, since it doesn't exist.
Before commit 5f61b961599a ("btrfs: fix inode lookup error handling
during log replay"), the returned error was -EIO instead of -ENOENT,
since we converted any errors when attempting to read an inode during
log replay to -EIO.
The reason for this is that the log replay procedure fails to ignore
the current inode when we are at the stage LOG_WALK_REPLAY_ALL, our
current inode has 0 links and last inode we processed in the previous
stage has a non 0 link count. In other words, the issue is that at
replay_one_extent() we only update wc->ignore_cur_inode if the current
replay stage is LOG_WALK_REPLAY_INODES.
Fix this by updating wc->ignore_cur_inode whenever we find an inode item
regardless of the current replay stage. This is a simple solution and easy
to backport, but later we can do other alternatives like avoid logging
extents or inode items other than the inode item for inodes with a link
count of 0.
The problem with the wc->ignore_cur_inode logic has been around since
commit f2d72f42d5fa ("Btrfs: fix warning when replaying log after fsync
of a tmpfile") but it only became frequent to hit since the more recent
commit 5e85262e542d ("btrfs: fix fsync of files with no hard links not
persisting deletion"), because we stopped skipping inodes with a link
count of 0 when logging, while before the problem would only be triggered
if trying to replay a log tree created with an older kernel which has a
logged inode with 0 links.
Linus Torvalds [Wed, 6 Aug 2025 05:52:59 +0000 (08:52 +0300)]
Merge tag 'ata-6.17-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Cleanup whitespace in messages in libata-core and the pata_pdc2027x,
pata_macio drivers (Colin)
- Fix ata_to_sense_error() to avoid seeing nonsensical sense data for
rare cases where we fail to get sense data from the drive. The
complementary fix to this is to ensure that we always return the
generic "ABORTED COMMAND" sense data for a failed command for which
we have no status or error fields
- The recent changes to link power management (LPM) which now prevent
the user from attempting to set an LPM policy through the
link_power_management_policy caused some regressions in test
environments because of the error that is now returned when writing
to that attribute when LPM is not supported. To allow users to not
trip on this, introduce the new link_power_management_supported
attribute to allow simple testing of a port/device LPM support (me)
* tag 'ata-6.17-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: pata_pdc2027x: Remove space before newline and abbreviations
ata: pata_macio: Remove space before newline
ata: libata-core: Remove space before newline
ata: libata-sata: Add link_power_management_supported sysfs attribute
ata: libata-scsi: Return aborted command when missing sense and result TF
ata: libata-scsi: Fix ata_to_sense_error() status handling
Linus Torvalds [Wed, 6 Aug 2025 04:32:52 +0000 (07:32 +0300)]
Merge tag 'kbuild-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
"This is the last pull request from me.
I'm grateful to have been able to continue as a maintainer for eight
years. From the next cycle, Nathan and Nicolas will maintain Kbuild.
- Fix a shortcut key issue in menuconfig
- Fix missing rebuild of kheaders
- Sort the symbol dump generated by gendwarfsyms
- Support zboot extraction in scripts/extract-vmlinux
- Migrate gconfig to GTK 3
- Add TAR variable to allow overriding the default tar command
- Hand over Kbuild maintainership"
* tag 'kbuild-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (92 commits)
MAINTAINERS: hand over Kbuild maintenance
kheaders: make it possible to override TAR
kbuild: userprogs: use correct linker when mixing clang and GNU ld
kconfig: lxdialog: replace strcpy() with strncpy() in inputbox.c
kconfig: lxdialog: replace strcpy with snprintf in print_autowrap
kconfig: gconf: refactor text_insert_help()
kconfig: gconf: remove unneeded variable in text_insert_msg
kconfig: gconf: use hyphens in signals
kconfig: gconf: replace GtkImageMenuItem with GtkMenuItem
kconfig: gconf: Fix Back button behavior
kconfig: gconf: fix single view to display dependent symbols correctly
scripts: add zboot support to extract-vmlinux
gendwarfksyms: order -T symtypes output by name
gendwarfksyms: use preferred form of sizeof for allocation
kconfig: qconf: confine {begin,end}Group to constructor and destructor
kconfig: qconf: fix ConfigList::updateListAllforAll()
kconfig: add a function to dump all menu entries in a tree-like format
kconfig: gconf: show GTK version in About dialog
kconfig: gconf: replace GtkHPaned and GtkVPaned with GtkPaned
kconfig: gconf: replace GdkColor with GdkRGBA
...
Sasha Levin [Tue, 5 Aug 2025 12:58:20 +0000 (08:58 -0400)]
media: venus: Fix OPP table error handling
The venus driver fails to check if dev_pm_opp_find_freq_{ceil,floor}()
returns an error pointer before calling dev_pm_opp_put(). This causes
a crash when OPP tables are not present in device tree.
Unable to handle kernel access to user memory outside uaccess routines
at virtual address 000000000000002e
...
pc : dev_pm_opp_put+0x1c/0x4c
lr : core_clks_enable+0x4c/0x16c [venus_core]
Add IS_ERR() checks before calling dev_pm_opp_put() to avoid
dereferencing error pointers.
Fixes: b179234b5e59 ("media: venus: pm_helpers: use opp-table for the frequency") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 6 Aug 2025 01:41:21 +0000 (04:41 +0300)]
Merge tag 'perf-fixes-27504' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git
Pull perf fixes from Thomas Gleixner:
"Perf fixes for perf_mmap() reference counting to prevent potential
reference count leaks which are caused by:
- VMA splits, which change the offset or size of a mapping, which
causes perf_mmap_close() to ignore the unmap or unmap the wrong
buffer.
- Several internal issues of perf_mmap(), which can cause reference
count leaks in the perf mmap, corrupt accounting or cause leaks in
perf drivers.
The main fix is to prevent VMA splits by implementing the
[may_]split() callback for vm operations.
The other issues are addressed by rearranging code, early returns on
failure and invocation of cleanups.
Also provide a selftest to validate the fixes.
The reference counting should be converted to refcount_t, but that
requires larger refactoring of the code and will be done once these
fixes are upstream"
* tag 'perf-fixes-27504' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git:
selftests/perf_events: Add a mmap() correctness test
perf/core: Prevent VMA split of buffer mappings
perf/core: Handle buffer mapping fail correctly in perf_mmap()
perf/core: Exit early on perf_mmap() fail
perf/core: Don't leak AUX buffer refcount on allocation failure
perf/core: Preserve AUX buffer allocation failure result
Ammar Faizi [Wed, 6 Aug 2025 00:31:05 +0000 (07:31 +0700)]
net: usbnet: Fix the wrong netif_carrier_on() call
The commit referenced in the Fixes tag causes usbnet to malfunction
(identified via git bisect). Post-commit, my external RJ45 LAN cable
fails to connect. Linus also reported the same issue after pulling that
commit.
The code has a logic error: netif_carrier_on() is only called when the
link is already on. Fix this by moving the netif_carrier_on() call
outside the if-statement entirely. This ensures it is always called
when EVENT_LINK_CARRIER_ON is set and properly clears it regardless
of the link state.
Masahiro Yamada [Mon, 4 Aug 2025 14:20:07 +0000 (23:20 +0900)]
MAINTAINERS: hand over Kbuild maintenance
I'm stepping down as the maintainer of Kbuild/Kconfig.
It was enjoyable to refactor and improve the kernel build system,
but due to personal reasons, I believe it's difficult for me to
continue in this role any further.
I discussed this off-list with Nathan and Nicolas, and they have
kindly agreed to take over the maintenance of Kbuild with Odd Fixes.
I'm grateful to them for stepping in.
As for Kconfig, there are currently no designated reviewers, so the
maintainer position will remain vacant for now. I hope someone will
step up to take on the role.
Michał Górny [Tue, 29 Jul 2025 13:24:55 +0000 (15:24 +0200)]
kheaders: make it possible to override TAR
Commit 86cdd2fdc4e3 ("kheaders: make headers archive reproducible")
introduced a number of options specific to GNU tar to the `tar`
invocation in `gen_kheaders.sh` script. This causes the script to fail
to work on systems where `tar` is not GNU tar. This can occur e.g.
on recent Gentoo Linux installations that support using bsdtar from
libarchive instead.
Add a `TAR` make variable to make it possible to override the tar
executable used, e.g. by specifying:
make TAR=gtar
Link: https://bugs.gentoo.org/884061 Reported-by: Sam James <sam@gentoo.org> Tested-by: Sam James <sam@gentoo.org> Co-developed-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Michał Górny <mgorny@gentoo.org> Signed-off-by: Sam James <sam@gentoo.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Thomas Weißschuh [Mon, 28 Jul 2025 13:47:37 +0000 (15:47 +0200)]
kbuild: userprogs: use correct linker when mixing clang and GNU ld
The userprogs infrastructure does not expect clang being used with GNU ld
and in that case uses /usr/bin/ld for linking, not the configured $(LD).
This fallback is problematic as it will break when cross-compiling.
Mixing clang and GNU ld is used for example when building for SPARC64,
as ld.lld is not sufficient; see Documentation/kbuild/llvm.rst.
Relax the check around --ld-path so it gets used for all linkers.
Fixes: dfc1b168a8c4 ("kbuild: userprogs: use correct lld when linking through clang") Cc: stable@vger.kernel.org Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
kconfig: lxdialog: replace strcpy() with strncpy() in inputbox.c
strcpy() performs no bounds checking and can lead to buffer overflows if
the input string exceeds the destination buffer size. This patch replaces
it with strncpy(), and null terminates the input string.
kconfig: lxdialog: replace strcpy with snprintf in print_autowrap
strcpy() does not perform bounds checking and can lead to buffer overflows
if the source string exceeds the destination buffer size. In
print_autowrap(), replace strcpy() with snprintf() to safely copy the
prompt string into the fixed-size tempstr buffer.
Meghana Malladi [Sun, 3 Aug 2025 18:02:16 +0000 (23:32 +0530)]
net: ti: icssg-prueth: Fix skb handling for XDP_PASS
emac_rx_packet() is a common function for handling traffic
for both xdp and non-xdp use cases. Use common logic for
handling skb with or without xdp to prevent any incorrect
packet processing. This patch fixes ping working with
XDP_PASS for icssg driver.
Samiullah Khawaja [Mon, 4 Aug 2025 16:44:57 +0000 (16:44 +0000)]
net: Update threaded state in napi config in netif_set_threaded
Commit 2677010e7793 ("Add support to set NAPI threaded for individual
NAPI") added support to enable/disable threaded napi using netlink. This
also extended the napi config save/restore functionality to set the napi
threaded state. This breaks netdev reset for drivers that use napi
threaded at device level and also use napi config save/restore on
napi_disable/napi_enable. Basically on netdev with napi threaded enabled
at device level, a napi_enable call will get stuck trying to stop the
napi kthread. This is because the napi->config->threaded is set to
disabled when threaded is enabled at device level.
The issue can be reproduced on virtio-net device using qemu. To
reproduce the issue run following,
Update the threaded state in napi config in netif_set_threaded and add a
new test that verifies this scenario.
Tested on qemu with virtio-net:
NETIF=eth0 ./tools/testing/selftests/drivers/net/napi_threaded.py
TAP version 13
1..2
ok 1 napi_threaded.change_num_queues
ok 2 napi_threaded.enable_dev_threaded_disable_napi_threaded
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
projects / users / willy / linux.git / log