Yan Zhai [Fri, 31 Jan 2025 08:31:39 +0000 (00:31 -0800)]
udp: gso: do not drop small packets when PMTU reduces
Commit 4094871db1d6 ("udp: only do GSO if # of segs > 1") avoided GSO
for small packets. But the kernel currently dismisses GSO requests only
after checking MTU/PMTU on gso_size. This means any packets, regardless
of their payload sizes, could be dropped when PMTU becomes smaller than
requested gso_size. We encountered this issue in production and it
caused a reliability problem that new QUIC connection cannot be
established before PMTU cache expired, while non GSO sockets still
worked fine at the same time.
Ideally, do not check any GSO related constraints when payload size is
smaller than requested gso_size, and return EMSGSIZE instead of EINVAL
on MTU/PMTU check failure to be more specific on the error cause.
Fixes: 4094871db1d6 ("udp: only do GSO if # of segs > 1") Signed-off-by: Yan Zhai <yan@cloudflare.com> Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lenny Szubowicz [Thu, 30 Jan 2025 21:57:54 +0000 (16:57 -0500)]
tg3: Disable tg3 PCIe AER on system reboot
Disable PCIe AER on the tg3 device on system reboot on a limited
list of Dell PowerEdge systems. This prevents a fatal PCIe AER event
on the tg3 device during the ACPI _PTS (prepare to sleep) method for
S5 on those systems. The _PTS is invoked by acpi_enter_sleep_state_prep()
as part of the kernel's reboot sequence as a result of commit 38f34dba806a ("PM: ACPI: reboot: Reinstate S5 for reboot").
There was an earlier fix for this problem by commit 2ca1c94ce0b6
("tg3: Disable tg3 device on system reboot to avoid triggering AER").
But it was discovered that this earlier fix caused a reboot hang
when some Dell PowerEdge servers were booted via ipxe. To address
this reboot hang, the earlier fix was essentially reverted by commit 9fc3bc764334 ("tg3: power down device only on SYSTEM_POWER_OFF").
This re-exposed the tg3 PCIe AER on reboot problem.
This fix is not an ideal solution because the root cause of the AER
is in system firmware. Instead, it's a targeted work-around in the
tg3 driver.
Note also that the PCIe AER must be disabled on the tg3 device even
if the system is configured to use "firmware first" error handling.
V3:
- Fix sparse warning on improper comparison of pdev->current_state
- Adhere to netdev comment style
Fixes: 9fc3bc764334 ("tg3: power down device only on SYSTEM_POWER_OFF") Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Sankararaman Jayaraman [Fri, 31 Jan 2025 04:23:41 +0000 (09:53 +0530)]
vmxnet3: Fix tx queue race condition with XDP
If XDP traffic runs on a CPU which is greater than or equal to
the number of the Tx queues of the NIC, then vmxnet3_xdp_get_tq()
always picks up queue 0 for transmission as it uses reciprocal scale
instead of simple modulo operation.
vmxnet3_xdp_xmit() and vmxnet3_xdp_xmit_frame() use the above
returned queue without any locking which can lead to race conditions
when multiple XDP xmits run in parallel on different CPU's.
This patch uses a simple module scheme when the current CPU equals or
exceeds the number of Tx queues on the NIC. It also adds locking in
vmxnet3_xdp_xmit() and vmxnet3_xdp_xmit_frame() functions.
Jakub Kicinski [Thu, 30 Jan 2025 03:15:19 +0000 (19:15 -0800)]
net: ipv6: fix dst ref loops in rpl, seg6 and ioam6 lwtunnels
Some lwtunnels have a dst cache for post-transformation dst.
If the packet destination did not change we may end up recording
a reference to the lwtunnel in its own cache, and the lwtunnel
state will never be freed.
Discovered by the ioam6.sh test, kmemleak was recently fixed
to catch per-cpu memory leaks. I'm not sure if rpl and seg6
can actually hit this, but in principle I don't see why not.
Fixes: 8cb3bf8bff3c ("ipv6: ioam: Add support for the ip6ip6 encapsulation") Fixes: 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels") Fixes: a7a29f9c361f ("net: ipv6: add rpl sr tunnel") Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250130031519.2716843-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Fainelli [Wed, 29 Jan 2025 23:13:42 +0000 (15:13 -0800)]
net: bcmgenet: Correct overlaying of PHY and MAC Wake-on-LAN
Some Wake-on-LAN modes such as WAKE_FILTER may only be supported by the MAC,
while others might be only supported by the PHY. Make sure that the .get_wol()
returns the union of both rather than only that of the PHY if the PHY supports
Wake-on-LAN.
When disabling Wake-on-LAN, make sure that this is done at both the PHY
and MAC level, rather than doing an early return from the PHY driver.
Fixes: 7e400ff35cbe ("net: bcmgenet: Add support for PHY-based Wake-on-LAN") Fixes: 9ee09edc05f2 ("net: bcmgenet: Properly overlay PHY and MAC Wake-on-LAN capabilities") Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250129231342.35013-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 30 Jan 2025 20:24:20 +0000 (12:24 -0800)]
Merge tag 'net-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from IPSec, netfilter and Bluetooth.
Nothing really stands out, but as usual there's a slight concentration
of fixes for issues added in the last two weeks before the merge
window, and driver bugs from 6.13 which tend to get discovered upon
wider distribution.
Current release - regressions:
- net: revert RTNL changes in unregister_netdevice_many_notify()
- Bluetooth: fix possible infinite recursion of btusb_reset
- eth: adjust locking in some old drivers which protect their state
with spinlocks to avoid sleeping in atomic; core protects netdev
state with a mutex now
Previous releases - regressions:
- eth:
- mlx5e: make sure we pass node ID, not CPU ID to kvzalloc_node()
- bgmac: reduce max frame size to support just 1500 bytes; the
jumbo frame support would previously cause OOB writes, but now
fails outright
- mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted, avoid
false detection of MPTCP blackholing
Previous releases - always broken:
- mptcp: handle fastopen disconnect correctly
- xfrm:
- make sure skb->sk is a full sock before accessing its fields
- fix taking a lock with preempt disabled for RT kernels
- eth: renesas: fix missing rtnl lock in suspend/resume path"
* tag 'net-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
MAINTAINERS: add Neal to TCP maintainers
net: revert RTNL changes in unregister_netdevice_many_notify()
net: hsr: fix fill_frame_info() regression vs VLAN packets
doc: mptcp: sysctl: blackhole_timeout is per-netns
mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted
netfilter: nf_tables: reject mismatching sum of field_len with set key length
net: sh_eth: Fix missing rtnl lock in suspend/resume path
net: ravb: Fix missing rtnl lock in suspend/resume path
selftests/net: Add test for loading devbound XDP program in generic mode
net: xdp: Disallow attaching device-bound programs in generic mode
tcp: correct handling of extreme memory squeeze
bgmac: reduce max frame size to support just MTU 1500
vsock/test: Add test for connect() retries
vsock/test: Add test for UAF due to socket unbinding
vsock/test: Introduce vsock_connect_fd()
vsock/test: Introduce vsock_bind()
vsock: Allow retrying on connect() failure
vsock: Keep the binding until socket destruction
Bluetooth: L2CAP: accept zero as a special value for MTU auto-selection
Bluetooth: btnxpuart: Fix glitches seen in dual A2DP streaming
...
Linus Torvalds [Thu, 30 Jan 2025 18:57:19 +0000 (10:57 -0800)]
Merge tag 'docs-6.14-2' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"Two fixes for footnote-related warnings that appeared with Sphinx 8.x.
We want to encourage use of newer Sphinx - they fixed a performance
problem and the docs build takes less than half the time it used to"
* tag 'docs-6.14-2' of git://git.lwn.net/linux:
docs: power: Fix footnote reference for Toshiba Satellite P10-554
Documentation: ublk: Drop Stefan Hajnoczi's message footnote
Linus Torvalds [Thu, 30 Jan 2025 18:53:49 +0000 (10:53 -0800)]
Merge tag 's390-6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Architecutre-specific ftrace recursion trylock tests were removed in
favour of the generic function_graph_enter(), but s390 got missed.
Remove this test for s390 as well.
- Add ftrace_get_symaddr() for s390, which returns the symbol address
from ftrace 'ip' parameter
* tag 's390-6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/tracing: Define ftrace_get_symaddr() for s390
s390/fgraph: Fix to remove ftrace_test_recursion_trylock()
Linus Torvalds [Thu, 30 Jan 2025 18:48:17 +0000 (10:48 -0800)]
Merge tag 's390-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- The rework that uncoupled physical and virtual address spaces
inadvertently prevented KASAN shadow mappings from using large pages.
Restore large page mappings for KASAN shadows
- Add decompressor routine physmem_alloc() that may fail, unlike
physmem_alloc_or_die(). This allows callers to implement fallback
paths
- Allow falling back from large pages to smaller pages (1MB or 4KB) if
the allocation of 2GB pages in the decompressor can not be fulfilled
- Add to the decompressor boot print support of "%%" format string,
width and padding hadnling, length modifiers and decimal conversion
specifiers
- Add to the decompressor message severity levels similar to kernel
ones. Support command-line options that control console output
verbosity
- Replaces boot_printk() calls with appropriate loglevel- specific
helpers such as boot_emerg(), boot_warn(), and boot_debug().
- Collect all boot messages into a ring buffer independent of the
current log level. This is particularly useful for early crash
analysis
- If 'earlyprintk' command line parameter is not specified, store
decompressor boot messages in a ring buffer to be printed later by
the kernel, once the console driver is registered
- Add 'bootdebug' command line parameter to enable printing of
decompressor debug messages when needed. That parameters allows
message suppressing and filtering
- Dump boot messages on a decompressor crash, but only if 'bootdebug'
command line parameter is enabled
- When CONFIG_PRINTK_TIME is enabled, add timestamps to boot messages
in the same format as regular printk()
- Dump physical memory tracking information on boot: online ranges,
reserved areas and vmem allocations
- Dump virtual memory layout and randomization details
- Improve decompression error reporting and dump the message ring
buffer in case the boot failed and system halted
- Add an exception handler which handles exceptions when FPU control
register is attempted to be set to an invalid value. Remove '.fixup'
section as result of this change
- Use 'A', 'O', and 'R' inline assembly format flags, which allows
recent Clang compilers to generate better FPU code
- Rework uaccess code so it reads better and generates more efficient
code
- Cleanup futex inline assembly code
- Disable KMSAN instrumention for futex inline assemblies, which
contain dereferenced user pointers. Otherwise, shadows for the user
pointers would be accessed
- PFs which are not initially configured but in standby create only a
single-function PCI domain. If they are configured later on, sibling
PFs and their child VFs will not be added to their PCI domain
breaking SR-IOV expectations.
Fix that by allowing initially configured but in standby PFs create
multi-function PCI domains
- Add '-std=gnu11' to decompressor and purgatory CFLAGS to avoid
compile errors caused by kernel's own definitions of 'bool', 'false',
and 'true' conflicting with the C23 reserved keywords
- Fix sclp subsystem failure when a sclp console is not present
- Fix misuse of non-NULL terminated strings in vmlogrdr driver
- Various other small improvements, cleanups and fixes
* tag 's390-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (53 commits)
s390/vmlogrdr: Use array instead of string initializer
s390/vmlogrdr: Use internal_name for error messages
s390/sclp: Initialize sclp subsystem via arch_cpu_finalize_init()
s390/tools: Use array instead of string initializer
s390/vmem: Fix null-pointer-arithmetic warning in vmem_map_init()
s390: Add '-std=gnu11' to decompressor and purgatory CFLAGS
s390/bitops: Use correct constraint for arch_test_bit() inline assembly
s390/pci: Fix SR-IOV for PFs initially in standby
s390/futex: Avoid KMSAN instrumention for user pointers
s390/uaccess: Rename get_put_user_noinstr_attributes to uaccess_kmsan_or_inline
s390/futex: Cleanup futex_atomic_cmpxchg_inatomic()
s390/futex: Generate futex atomic op functions
s390/uaccess: Remove INLINE_COPY_FROM_USER and INLINE_COPY_TO_USER
s390/uaccess: Use asm goto for put_user()/get_user()
s390/uaccess: Remove usage of the oac specifier
s390/uaccess: Replace EX_TABLE_UA_LOAD_MEM exception handling
s390/uaccess: Cleanup noinstr __put_user()/__get_user() inline assembly constraints
s390/uaccess: Remove __put_user_fn()/__get_user_fn() wrappers
s390/uaccess: Move put_user() / __put_user() close to put_user() asm code
s390/uaccess: Use asm goto for __mvc_kernel_nofault()
...
Linus Torvalds [Thu, 30 Jan 2025 18:19:30 +0000 (10:19 -0800)]
Merge tag 'gpio-fixes-for-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- update gpio-sim selftests to not fail now that we no longer allow
rmdir() on configfs entries of active devices
- remove leftover code from gpio-mxc
* tag 'gpio-fixes-for-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
selftests: gpio: gpio-sim: Fix missing chip disablements
gpio: mxc: remove dead code after switch to DT-only
Linus Torvalds [Thu, 30 Jan 2025 17:13:35 +0000 (09:13 -0800)]
Merge tag 'pull-revalidate' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs d_revalidate updates from Al Viro:
"Provide stable parent and name to ->d_revalidate() instances
Most of the filesystem methods where we care about dentry name and
parent have their stability guaranteed by the callers;
->d_revalidate() is the major exception.
It's easy enough for callers to supply stable values for expected name
and expected parent of the dentry being validated. That kills quite a
bit of boilerplate in ->d_revalidate() instances, along with a bunch
of races where they used to access ->d_name without sufficient
precautions"
* tag 'pull-revalidate' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
9p: fix ->rename_sem exclusion
orangefs_d_revalidate(): use stable parent inode and name passed by caller
ocfs2_dentry_revalidate(): use stable parent inode and name passed by caller
nfs: fix ->d_revalidate() UAF on ->d_name accesses
nfs{,4}_lookup_validate(): use stable parent inode passed by caller
gfs2_drevalidate(): use stable parent inode and name passed by caller
fuse_dentry_revalidate(): use stable parent inode and name passed by caller
vfat_revalidate{,_ci}(): use stable parent inode passed by caller
exfat_d_revalidate(): use stable parent inode passed by caller
fscrypt_d_revalidate(): use stable parent inode passed by caller
ceph_d_revalidate(): propagate stable name down into request encoding
ceph_d_revalidate(): use stable parent inode passed by caller
afs_d_revalidate(): use stable name and parent inode passed by caller
Pass parent directory inode and expected name to ->d_revalidate()
generic_ci_d_compare(): use shortname_storage
ext4 fast_commit: make use of name_snapshot primitives
dissolve external_name.u into separate members
make take_dentry_name_snapshot() lockless
dcache: back inline names with a struct-wrapped array of unsigned long
make sure that DNAME_INLINE_LEN is a multiple of word size
Jakub Kicinski [Thu, 30 Jan 2025 17:01:00 +0000 (09:01 -0800)]
Merge tag 'nf-25-01-30' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains one Netfilter fix:
1) Reject mismatching sum of field_len with set key length which allows
to create a set without inconsistent pipapo rule width and set key
length.
* tag 'nf-25-01-30' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: reject mismatching sum of field_len with set key length
====================
Eric Dumazet [Wed, 29 Jan 2025 14:27:26 +0000 (14:27 +0000)]
net: revert RTNL changes in unregister_netdevice_many_notify()
This patch reverts following changes:
83419b61d187 net: reduce RTNL hold duration in unregister_netdevice_many_notify() (part 2) ae646f1a0bb9 net: reduce RTNL hold duration in unregister_netdevice_many_notify() (part 1) cfa579f66656 net: no longer hold RTNL while calling flush_all_backlogs()
This caused issues in layers holding a private mutex:
Linus Torvalds [Thu, 30 Jan 2025 16:47:17 +0000 (08:47 -0800)]
Merge tag 'ntfs3_for_6.14' of https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 fixes from Konstantin Komarov:
- unify inode corruption marking and mark them as bad immediately upon
detection of an error in attribute enumeration
- folio cleanup
* tag 'ntfs3_for_6.14' of https://github.com/Paragon-Software-Group/linux-ntfs3:
fs/ntfs3: Unify inode corruption marking with _ntfs_bad_inode()
fs/ntfs3: Mark inode as bad as soon as error detected in mi_enum_attr()
ntfs3: Remove an access to page->index
Linus Torvalds [Thu, 30 Jan 2025 16:42:50 +0000 (08:42 -0800)]
Merge tag 'bcachefs-2025-01-29' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
- second half of a fix for a bug that'd been causing oopses on
filesystems using snapshots with memory pressure (key cache fills for
snaphots btrees are tricky)
- build fix for strange compiler configurations that double stack frame
size
- "journal stuck timeout" now takes into account device latency: this
fixes some spurious warnings, and the main remaining source of SRCU
lock hold time warnings (I'm no longer seeing this in my CI, so any
users still seeing this should definitely ping me)
- fix for slow/hanging unmounts (" Improve journal pin flushing")
- some more tracepoint fixes/improvements, to chase down the "rebalance
isn't making progress" issues
* tag 'bcachefs-2025-01-29' of git://evilpiepirate.org/bcachefs:
bcachefs: Improve trace_move_extent_finish
bcachefs: Fix trace_copygc
bcachefs: Journal writes are now IOPRIO_CLASS_RT
bcachefs: Improve journal pin flushing
bcachefs: fix bch2_btree_node_flags
bcachefs: rebalance, copygc enabled are runtime opts
bcachefs: Improve decompression error messages
bcachefs: bset_blacklisted_journal_seq is now AUTOFIX
bcachefs: "Journal stuck" timeout now takes into account device latency
bcachefs: Reduce stack frame size of __bch2_str_hash_check_key()
bcachefs: Fix btree_trans_peek_key_cache()
====================
mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted
Here are two small fixes for issues introduced in v6.12.
- Patch 1: reset the mpc_drop mark for other SYN retransmits, to only
consider an MPTCP blackhole when the first SYN retransmitted without
the MPTCP options is accepted, as initially intended.
- Patch 2: also mention in the doc that the blackhole_timeout sysctl
knob is per-netns, like all the others.
doc: mptcp: sysctl: blackhole_timeout is per-netns
All other sysctl entries mention it, and it is a per-namespace sysctl.
So mention it as well.
Fixes: 27069e7cb3d1 ("mptcp: disable active MPTCP in case of blackhole") Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted
The Fixes commit mentioned this:
> An MPTCP firewall blackhole can be detected if the following SYN
> retransmission after a fallback to "plain" TCP is accepted.
But in fact, this blackhole was detected if any following SYN
retransmissions after a fallback to TCP was accepted.
That's because 'mptcp_subflow_early_fallback()' will set 'request_mptcp'
to 0, and 'mpc_drop' will never be reset to 0 after.
This is an issue, because some not so unusual situations might cause the
kernel to detect a false-positive blackhole, e.g. a client trying to
connect to a server while the network is not ready yet, causing a few
SYN retransmissions, before reaching the end server.
Fixes: 27069e7cb3d1 ("mptcp: disable active MPTCP in case of blackhole") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pablo Neira Ayuso [Tue, 28 Jan 2025 11:26:33 +0000 (12:26 +0100)]
netfilter: nf_tables: reject mismatching sum of field_len with set key length
The field length description provides the length of each separated key
field in the concatenation, each field gets rounded up to 32-bits to
calculate the pipapo rule width from pipapo_init(). The set key length
provides the total size of the key aligned to 32-bits.
Register-based arithmetics still allows for combining mismatching set
key length and field length description, eg. set key length 10 and field
description [ 5, 4 ] leading to pipapo width of 12.
Cc: stable@vger.kernel.org Fixes: 3ce67e3793f4 ("netfilter: nf_tables: do not allow mismatch field size and set key length") Reported-by: Noam Rathaus <noamr@ssd-disclosure.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
====================
Fix missing rtnl lock in suspend path
Fix the suspend path by ensuring the rtnl lock is held where required.
Calls to open, close and WOL operations must be performed under the
rtnl lock to prevent conflicts with ongoing ndo operations.
Discussion about this issue can be found here:
https://lore.kernel.org/netdev/20250120141926.1290763-1-kory.maincent@bootlin.com/
While working on the ravb fix, it was discovered that the sh_eth driver
has the same issue. This patch series addresses both drivers.
I do not have access to hardware for either of these MACs, so it would
be great if maintainers or others with the relevant boards could test
these fixes.
Kory Maincent [Wed, 29 Jan 2025 09:50:47 +0000 (10:50 +0100)]
net: sh_eth: Fix missing rtnl lock in suspend/resume path
Fix the suspend/resume path by ensuring the rtnl lock is held where
required. Calls to sh_eth_close, sh_eth_open and wol operations must be
performed under the rtnl lock to prevent conflicts with ongoing ndo
operations.
Kory Maincent [Wed, 29 Jan 2025 09:50:46 +0000 (10:50 +0100)]
net: ravb: Fix missing rtnl lock in suspend/resume path
Fix the suspend/resume path by ensuring the rtnl lock is held where
required. Calls to ravb_open, ravb_close and wol operations must be
performed under the rtnl lock to prevent conflicts with ongoing ndo
operations.
Paolo Abeni [Thu, 30 Jan 2025 10:00:31 +0000 (11:00 +0100)]
Merge tag 'for-net-2025-01-29' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- btusb: mediatek: Add locks for usb_driver_claim_interface()
- L2CAP: accept zero as a special value for MTU auto-selection
- btusb: Fix possible infinite recursion of btusb_reset
- Add ABI doc for sysfs reset
- btnxpuart: Fix glitches seen in dual A2DP streaming
* tag 'for-net-2025-01-29' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: accept zero as a special value for MTU auto-selection
Bluetooth: btnxpuart: Fix glitches seen in dual A2DP streaming
Bluetooth: Add ABI doc for sysfs reset
Bluetooth: Fix possible infinite recursion of btusb_reset
Bluetooth: btusb: mediatek: Add locks for usb_driver_claim_interface()
====================
Toke Høiland-Jørgensen [Mon, 27 Jan 2025 13:13:42 +0000 (14:13 +0100)]
net: xdp: Disallow attaching device-bound programs in generic mode
Device-bound programs are used to support RX metadata kfuncs. These
kfuncs are driver-specific and rely on the driver context to read the
metadata. This means they can't work in generic XDP mode. However, there
is no check to disallow such programs from being attached in generic
mode, in which case the metadata kfuncs will be called in an invalid
context, leading to crashes.
Fix this by adding a check to disallow attaching device-bound programs
in generic mode.
Fixes: 2b3486bc2d23 ("bpf: Introduce device-bound XDP programs") Reported-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de> Closes: https://lore.kernel.org/r/dae862ec-43b5-41a0-8edf-46c59071cdda@hetzner-cloud.de Tested-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://patch.msgid.link/20250127131344.238147-1-toke@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jon Maloy [Mon, 27 Jan 2025 23:13:04 +0000 (18:13 -0500)]
tcp: correct handling of extreme memory squeeze
Testing with iperf3 using the "pasta" protocol splicer has revealed
a problem in the way tcp handles window advertising in extreme memory
squeeze situations.
Under memory pressure, a socket endpoint may temporarily advertise
a zero-sized window, but this is not stored as part of the socket data.
The reasoning behind this is that it is considered a temporary setting
which shouldn't influence any further calculations.
However, if we happen to stall at an unfortunate value of the current
window size, the algorithm selecting a new value will consistently fail
to advertise a non-zero window once we have freed up enough memory.
This means that this side's notion of the current window size is
different from the one last advertised to the peer, causing the latter
to not send any data to resolve the sitution.
The problem occurs on the iperf3 server side, and the socket in question
is a completely regular socket with the default settings for the
fedora40 kernel. We do not use SO_PEEK or SO_RCVBUF on the socket.
The following excerpt of a logging session, with own comments added,
shows more in detail what is happening:
// Receive queue is at 85 buffers and we are out of memory.
// We drop the incoming buffer, although it is in sequence, and decide
// to send an advertisement with a window of zero.
// We don't update tp->rcv_wnd and tp->rcv_wup accordingly, which means
// we unconditionally shrink the window.
// After each read, the algorithm for calculating the new receive
// window in __tcp_cleanup_rbuf() finds it is too small to advertise
// or to update tp->rcv_wnd.
// Meanwhile, the peer thinks the window is zero, and will not send
// any more data to trigger an update from the interrupt mode side.
// The receive queue is empty, but no new advertisement has been sent.
// The peer still thinks the receive window is zero, and sends nothing.
// We have ended up in a deadlock situation.
Note that well behaved endpoints will send win0 probes, so the problem
will not occur.
Furthermore, we have observed that in these situations this side may
send out an updated 'th->ack_seq´ which is not stored in tp->rcv_wup
as it should be. Backing ack_seq seems to be harmless, but is of
course still wrong from a protocol viewpoint.
We fix this by updating the socket state correctly when a packet has
been dropped because of memory exhaustion and we have to advertize
a zero window.
Further testing shows that the connection recovers neatly from the
squeeze situation, and traffic can continue indefinitely.
Fixes: e2142825c120 ("net: tcp: send zero-window ACK when no memory") Cc: Menglong Dong <menglong8.dong@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Jon Maloy <jmaloy@redhat.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Link: https://patch.msgid.link/20250127231304.1465565-1-jmaloy@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rafał Miłecki [Mon, 27 Jan 2025 17:51:59 +0000 (09:51 -0800)]
bgmac: reduce max frame size to support just MTU 1500
bgmac allocates new replacement buffer before handling each received
frame. Allocating & DMA-preparing 9724 B each time consumes a lot of CPU
time. Ideally bgmac should just respect currently set MTU but it isn't
the case right now. For now just revert back to the old limited frame
size.
This change bumps NAT masquerade speed by ~95%.
Since commit 8218f62c9c9b ("mm: page_frag: use initial zero offset for
page_frag_alloc_align()"), the bgmac driver fails to open its network
interface successfully and runs out of memory in the following call
stack:
So in that case we do indeed have offset + fragsz (40192) > size (32768)
and so we would eventually return NULL. Reverting to the older 1500
bytes MTU allows the network driver to be usable again.
Fixes: 8c7da63978f1 ("bgmac: configure MTU and add support for frames beyond 8192 byte size") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
[florian: expand commit message about recent commits] Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250127175159.1788246-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
vsock: Transport reassignment and error handling issues
Series deals with two issues:
- socket reference count imbalance due to an unforgiving transport release
(triggered by transport reassignment);
- unintentional API feature, a failing connect() making the socket
impossible to use for any subsequent connect() attempts.
Michal Luczaj [Tue, 28 Jan 2025 13:15:32 +0000 (14:15 +0100)]
vsock/test: Add test for connect() retries
Deliberately fail a connect() attempt; expect error. Then verify that
subsequent attempt (using the same socket) can still succeed, rather than
fail outright.
Michal Luczaj [Tue, 28 Jan 2025 13:15:28 +0000 (14:15 +0100)]
vsock: Allow retrying on connect() failure
sk_err is set when a (connectible) connect() fails. Effectively, this makes
an otherwise still healthy SS_UNCONNECTED socket impossible to use for any
subsequent connection attempts.
Clear sk_err upon trying to establish a connection.
Michal Luczaj [Tue, 28 Jan 2025 13:15:27 +0000 (14:15 +0100)]
vsock: Keep the binding until socket destruction
Preserve sockets bindings; this includes both resulting from an explicit
bind() and those implicitly bound through autobind during connect().
Prevents socket unbinding during a transport reassignment, which fixes a
use-after-free:
1. vsock_create() (refcnt=1) calls vsock_insert_unbound() (refcnt=2)
2. transport->release() calls vsock_remove_bound() without checking if
sk was bound and moved to bound list (refcnt=1)
3. vsock_bind() assumes sk is in unbound list and before
__vsock_insert_bound(vsock_bound_sockets()) calls
__vsock_remove_bound() which does:
list_del_init(&vsk->bound_table); // nop
sock_put(&vsk->sk); // refcnt=0
BUG: KASAN: slab-use-after-free in __vsock_bind+0x62e/0x730
Read of size 4 at addr ffff88816b46a74c by task a.out/2057
dump_stack_lvl+0x68/0x90
print_report+0x174/0x4f6
kasan_report+0xb9/0x190
__vsock_bind+0x62e/0x730
vsock_bind+0x97/0xe0
__sys_bind+0x154/0x1f0
__x64_sys_bind+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Linus Torvalds [Wed, 29 Jan 2025 22:38:19 +0000 (14:38 -0800)]
Merge tag 'soundwire-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- SoundWire multi lane support to use multiple lanes if supported
- Stream handling of DEPREPARED state
- AMD wake register programming for power off mode
* tag 'soundwire-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: amd: clear wake enable register for power off mode
soundwire: generic_bandwidth_allocation: count the bandwidth of active streams only
SoundWire: pass stream to compute_params()
soundwire: generic_bandwidth_allocation: add lane in sdw_group_params
soundwire: generic_bandwidth_allocation: select data lane
soundwire: generic_bandwidth_allocation: check required freq accurately
soundwire: generic_bandwidth_allocation: correct clk_freq check in sdw_select_row_col
Soundwire: generic_bandwidth_allocation: set frame shape on fly
Soundwire: stream: program BUSCLOCK_SCALE
Soundwire: add sdw_slave_get_scale_index helper
soundwire: generic_bandwidth_allocation: skip DEPREPARED streams
soundwire: stream: set DEPREPARED state earlier
soundwire: add lane_used_bandwidth in struct sdw_bus
soundwire: mipi_disco: read lane mapping properties from ACPI
soundwire: add lane field in sdw_port_runtime
soundwire: bus: Move irq mapping cleanup into devres
Linus Torvalds [Wed, 29 Jan 2025 22:29:57 +0000 (14:29 -0800)]
Merge tag 'dmaengine-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"A bunch of new device support and updates to few drivers, biggest of
them amd ones.
New support:
- TI J722S CSI BCDMA controller support
- Intel idxd Panther Lake family platforms
- Allwinner F1C100s suniv DMA
- Qualcomm QCS615, QCS8300, SM8750, SA8775P GPI dma controller support
- AMD ae4dma controller support and reorganisation of amd driver
Updates:
- Channel page support for Nvidia Tegra210 adma driver
- Freescale support for S32G based platforms
- Yamilfy atmel dma bindings"
* tag 'dmaengine-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (45 commits)
dmaengine: idxd: Enable Function Level Reset (FLR) for halt
dmaengine: idxd: Refactor halt handler
dmaengine: idxd: Add idxd_device_config_save() and idxd_device_config_restore() helpers
dmaengine: idxd: Binding and unbinding IDXD device and driver
dmaengine: idxd: Add idxd_pci_probe_alloc() helper
dt-bindings: dma: atmel: Convert to json schema
dt-bindings: dma: st-stm32-dmamux: Add description for dma-cell values
dmaengine: qcom: gpi: Add GPI immediate DMA support for SPI protocol
dt-bindings: dma: adi,axi-dmac: deprecate adi,channels node
dt-bindings: dma: adi,axi-dmac: convert to yaml schema
dmaengine: mv_xor: switch to for_each_child_of_node_scoped()
dmaengine: bcm2835-dma: Prevent suspend if DMA channel is busy
dmaengine: tegra210-adma: Support channel page
dt-bindings: dma: Support channel page to nvidia,tegra210-adma
dmaengine: ti: k3-udma: Add support for J722S CSI BCDMA
dt-bindings: dma: ti: k3-bcdma: Add J722S CSI BCDMA
dmaengine: ti: edma: fix OF node reference leaks in edma_driver
dmaengine: ti: edma: make the loop condition simpler in edma_probe()
dmaengine: fsl-edma: read/write multiple registers in cyclic transactions
dmaengine: fsl-edma: add support for S32G based platforms
...
Fedor Pchelkin [Tue, 28 Jan 2025 21:08:14 +0000 (00:08 +0300)]
Bluetooth: L2CAP: accept zero as a special value for MTU auto-selection
One of the possible ways to enable the input MTU auto-selection for L2CAP
connections is supposed to be through passing a special "0" value for it
as a socket option. Commit [1] added one of those into avdtp. However, it
simply wouldn't work because the kernel still treats the specified value
as invalid and denies the setting attempt. Recorded BlueZ logs include the
following:
Found by Linux Verification Center (linuxtesting.org).
Fixes: 4b6e228e297b ("Bluetooth: Auto tune if input MTU is set to 0") Cc: stable@vger.kernel.org Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Neeraj Sanjay Kale [Mon, 20 Jan 2025 14:19:46 +0000 (19:49 +0530)]
Bluetooth: btnxpuart: Fix glitches seen in dual A2DP streaming
This fixes a regression caused by previous commit for fixing truncated
ACL data, which is causing some intermittent glitches when running two
A2DP streams.
serdev_device_write_buf() is the root cause of the glitch, which is
reverted, and the TX work will continue to write until the queue is empty.
This change fixes both issues. No A2DP streaming glitches or truncated
ACL data issue observed.
Fixes: 8023dd220425 ("Bluetooth: btnxpuart: Fix driver sending truncated data") Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets") Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Hsin-chen Chuang [Mon, 20 Jan 2025 10:39:39 +0000 (18:39 +0800)]
Bluetooth: Fix possible infinite recursion of btusb_reset
The function enters infinite recursion if the HCI device doesn't support
GPIO reset: btusb_reset -> hdev->reset -> vendor_reset -> btusb_reset...
btusb_reset shouldn't call hdev->reset after commit f07d478090b0
("Bluetooth: Get rid of cmd_timeout and use the reset callback")
Fixes: f07d478090b0 ("Bluetooth: Get rid of cmd_timeout and use the reset callback") Signed-off-by: Hsin-chen Chuang <chharry@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Douglas Anderson [Thu, 16 Jan 2025 03:36:36 +0000 (19:36 -0800)]
Bluetooth: btusb: mediatek: Add locks for usb_driver_claim_interface()
The documentation for usb_driver_claim_interface() says that "the
device lock" is needed when the function is called from places other
than probe(). This appears to be the lock for the USB interface
device. The Mediatek btusb code gets called via this path:
With the above call trace the device lock hasn't been claimed. Claim
it.
Without this fix, we'd sometimes see the error "Failed to claim iso
interface". Sometimes we'd even see worse errors, like a NULL pointer
dereference (where `intf->dev.driver` was NULL) with a trace like:
Both errors appear to be fixed with the proper locking.
Fixes: ceac1cb0259d ("Bluetooth: btusb: mediatek: add ISO data transmission functions") Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Linus Torvalds [Wed, 29 Jan 2025 19:56:55 +0000 (11:56 -0800)]
Merge tag 'regulator-fix-v6.14-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fixes that have come in during the merge window: one that
operates the TPS6287x devices more within the design spec and can
prevent current surges when changing voltages and another more trivial
one for error message formatting"
* tag 'regulator-fix-v6.14-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: Add missing newline character
regulator: TPS6287X: Use min/max uV to get VRANGE
Linus Torvalds [Wed, 29 Jan 2025 19:23:22 +0000 (11:23 -0800)]
Merge tag 'cxl-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dave Jiang:
"A tweak to the HMAT output that was acked by Rafael, a prep patch for
CXL type2 devices support that's coming soon, refactoring of the CXL
regblock enumeration code, and a series of patches to update the event
records to CXL spec r3.1:
- Move HMAT printouts to pr_debug()
- Add CXL type2 support to cxl_dvsec_rr_decode() in preparation for
type2 support
- A series that updates CXL event records to spec r3.1 and related
changes
- Refactoring of cxl_find_regblock_instance() to count regblocks"
* tag 'cxl-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/core/regs: Refactor out functions to count regblocks of given type
cxl/test: Update test code for event records to CXL spec rev 3.1
cxl/events: Update Memory Module Event Record to CXL spec rev 3.1
cxl/events: Update DRAM Event Record to CXL spec rev 3.1
cxl/events: Update General Media Event Record to CXL spec rev 3.1
cxl/events: Add Component Identifier formatting for CXL spec rev 3.1
cxl/events: Update Common Event Record to CXL spec rev 3.1
cxl/pci: Add CXL Type 1/2 support to cxl_dvsec_rr_decode()
ACPI/HMAT: Move HMAT messages to pr_debug()
Linus Torvalds [Wed, 29 Jan 2025 18:55:04 +0000 (10:55 -0800)]
Merge tag 'powerpc-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Fix to handle PE state in pseries_eeh_get_state()
- Handle unset of tce window if it was never set
Thanks to Narayana Murty N, Ritesh Harjani (IBM), Shivaprasad G Bhat,
and Vaishnavi Bhat.
* tag 'powerpc-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/iommu: Don't unset window if it was never set
powerpc/pseries/eeh: Fix get PE state translation
Linus Torvalds [Wed, 29 Jan 2025 18:50:28 +0000 (10:50 -0800)]
Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC cleanups from Eric Biggers:
"Simplify the kconfig options for controlling which CRC implementations
are built into the kernel, as was requested by Linus.
This means making the option to disable the arch code visible only
when CONFIG_EXPERT=y, and standardizing on a single generic
implementation of CRC32"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crc32: remove other generic implementations
lib/crc: simplify the kconfig options for CRC implementations
Linus Torvalds [Wed, 29 Jan 2025 18:35:40 +0000 (10:35 -0800)]
Merge tag 'constfy-sysctl-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl table constification from Joel Granados:
"All ctl_table declared outside of functions and that remain unmodified
after initialization are const qualified.
This prevents unintended modifications to proc_handler function
pointers by placing them in the .rodata section.
This is a continuation of the tree-wide effort started a few releases
ago with the constification of the ctl_table struct arguments in the
sysctl API done in 78eb4ea25cd5 ("sysctl: treewide: constify the
ctl_table argument of proc_handlers")"
* tag 'constfy-sysctl-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
treewide: const qualify ctl_tables where applicable
Linus Torvalds [Wed, 29 Jan 2025 17:40:23 +0000 (09:40 -0800)]
Merge tag 'fuse-update-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
"Add support for io-uring communication between kernel and userspace
using IORING_OP_URING_CMD (Bernd Schubert). Following features enable
gains in performance compared to the regular interface:
- Allow processing multiple requests with less syscall overhead
- Combine commit of old and fetch of new fuse request
- CPU/NUMA affinity of queues
Patches were reviewed by several people, including Pavel Begunkov,
io-uring co-maintainer"
* tag 'fuse-update-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: prevent disabling io-uring on active connections
fuse: enable fuse-over-io-uring
fuse: block request allocation until io-uring init is complete
fuse: {io-uring} Prevent mount point hang on fuse-server termination
fuse: Allow to queue bg requests through io-uring
fuse: Allow to queue fg requests through io-uring
fuse: {io-uring} Make fuse_dev_queue_{interrupt,forget} non-static
fuse: {io-uring} Handle teardown of ring entries
fuse: Add io-uring sqe commit and fetch support
fuse: {io-uring} Make hash-list req unique finding functions non-static
fuse: Add fuse-io-uring handling into fuse_copy
fuse: Make fuse_copy non static
fuse: {io-uring} Handle SQEs - register commands
fuse: make args->in_args[0] to be always the header
fuse: Add fuse-io-uring design documentation
fuse: Move request bits
fuse: Move fuse_get_dev to header file
fuse: rename to fuse_dev_end_requests and make non-static
Eric Biggers [Thu, 23 Jan 2025 21:29:04 +0000 (13:29 -0800)]
lib/crc32: remove other generic implementations
Now that we've standardized on the byte-by-byte implementation of CRC32
as the only generic implementation (see previous commit for the
rationale), remove the code for the other implementations.
Eric Biggers [Thu, 23 Jan 2025 21:29:03 +0000 (13:29 -0800)]
lib/crc: simplify the kconfig options for CRC implementations
Make the following simplifications to the kconfig options for choosing
CRC implementations for CRC32 and CRC_T10DIF:
1. Make the option to disable the arch-optimized code be visible only
when CONFIG_EXPERT=y.
2. Make a single option control the inclusion of the arch-optimized code
for all enabled CRC variants.
3. Make CRC32_SARWATE (a.k.a. slice-by-1 or byte-by-byte) be the only
generic CRC32 implementation.
The result is there is now just one option, CRC_OPTIMIZATIONS, which is
default y and can be disabled only when CONFIG_EXPERT=y.
Rationale:
1. Enabling the arch-optimized code is nearly always the right choice.
However, people trying to build the tiniest kernel possible would
find some use in disabling it. Anything we add to CRC32 is de facto
unconditional, given that CRC32 gets selected by something in nearly
all kernels. And unfortunately enabling the arch CRC code does not
eliminate the need to build the generic CRC code into the kernel too,
due to CPU feature dependencies. The size of the arch CRC code will
also increase slightly over time as more CRC variants get added and
more implementations targeting different instruction set extensions
get added. Thus, it seems worthwhile to still provide an option to
disable it, but it should be considered an expert-level tweak.
2. Considering the use case described in (1), there doesn't seem to be
sufficient value in making the arch-optimized CRC code be
independently configurable for different CRC variants. Note also
that multiple variants were already grouped together, e.g.
CONFIG_CRC32 actually enables three different variants of CRC32.
3. The bit-by-bit implementation is uselessly slow, whereas slice-by-n
for n=4 and n=8 use tables that are inconveniently large: 4096 bytes
and 8192 bytes respectively, compared to 1024 bytes for n=1. Higher
n gives higher instruction-level parallelism, so higher n easily wins
on traditional microbenchmarks on most CPUs. However, the larger
tables, which are accessed randomly, can be harmful in real-world
situations where the dcache may be cold or useful data may need be
evicted from the dcache. Meanwhile, today most architectures have
much faster CRC32 implementations using dedicated CRC32 instructions
or carryless multiplication instructions anyway, which make the
generic code obsolete in most cases especially on long messages.
Another reason for going with n=1 is that this is already what is
used by all the other CRC variants in the kernel. CRC32 was unique
in having support for larger tables. But as per the above this can
be considered an outdated optimization.
The standardization on slice-by-1 a.k.a. CRC32_SARWATE makes much of
the code in lib/crc32.c unused. A later patch will clean that up.
s390/fgraph: Fix to remove ftrace_test_recursion_trylock()
Fix to remove ftrace_test_recursion_trylock() from ftrace_graph_func()
because commit d576aec24df9 ("fgraph: Get ftrace recursion lock in
function_graph_enter") has been moved it to function_graph_enter_regs()
already.
Reported-by: Jiri Olsa <olsajiri@gmail.com> Closes: https://lore.kernel.org/all/Z5O0shrdgeExZ2kF@krava/ Fixes: d576aec24df9 ("fgraph: Get ftrace recursion lock in function_graph_enter") Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Tested-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Ihor Solodrai <ihor.solodrai@linux.dev> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Link: https://lore.kernel.org/r/173807817692.1854334.2985776940754607459.stgit@devnote2 Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Heiko Carstens [Fri, 24 Jan 2025 13:51:54 +0000 (14:51 +0100)]
s390/vmlogrdr: Use array instead of string initializer
Compiling vmlogrdr with GCC 15 generates this warning:
CC [M] drivers/s390/char/vmlogrdr.o
drivers/s390/char/vmlogrdr.c:126:29: error: initializer-string for array
of ‘char’ is too long [-Werror=unterminated-string-initialization]
126 | { .system_service = "*LOGREC ",
Given that the system_service array intentionally contains a non-null
terminated string use an array initializer, instead of string
initializer to get rid of this warning.
Heiko Carstens [Fri, 24 Jan 2025 13:51:53 +0000 (14:51 +0100)]
s390/vmlogrdr: Use internal_name for error messages
Use the internal_name member of vmlogrdr_priv_t to print error messages
instead of the system_service member. The system_service member is not a
string, but a non-null terminated eight byte character array, which
contains the ASCII representation of a z/VM system service.
Linus Torvalds [Tue, 28 Jan 2025 22:32:03 +0000 (14:32 -0800)]
Merge tag 'x86-urgent-2025-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix a potential early boot crash in SEV-SNP guests, where certain
config and build environment combinations can generate absolute
references to symbols in the early boot code"
* tag 'x86-urgent-2025-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Disable jump tables in SEV startup code
Linus Torvalds [Tue, 28 Jan 2025 22:23:46 +0000 (14:23 -0800)]
Merge tag 'nfs-for-6.14-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"New Features:
- Enable using direct IO with localio
- Added localio related tracepoints
Bugfixes:
- Sunrpc fixes for working with a very large cl_tasks list
- Fix a possible buffer overflow in nfs_sysfs_link_rpc_client()
- Fixes for handling reconnections with localio
- Fix how the NFS_FSCACHE kconfig option interacts with NETFS_SUPPORT
- Fix COPY_NOTIFY xdr_buf size calculations
- pNFS/Flexfiles fix for retrying requesting a layout segment for
reads
- Sunrpc fix for retrying on EKEYEXPIRED error when the TGT is
expired
Cleanups:
- Various other nfs & nfsd localio cleanups
- Prepratory patches for async copy improvements that are under
development
- Make OFFLOAD_CANCEL, LAYOUTSTATS, and LAYOUTERR moveable to other
xprts
- Add netns inum and srcaddr to debugfs rpc_xprt info"
* tag 'nfs-for-6.14-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (28 commits)
SUNRPC: do not retry on EKEYEXPIRED when user TGT ticket expired
sunrpc: add netns inum and srcaddr to debugfs rpc_xprt info
pnfs/flexfiles: retry getting layout segment for reads
NFSv4.2: make LAYOUTSTATS and LAYOUTERROR MOVEABLE
NFSv4.2: mark OFFLOAD_CANCEL MOVEABLE
NFSv4.2: fix COPY_NOTIFY xdr buf size calculation
NFS: Rename struct nfs4_offloadcancel_data
NFS: Fix typo in OFFLOAD_CANCEL comment
NFS: CB_OFFLOAD can return NFS4ERR_DELAY
nfs: Make NFS_FSCACHE select NETFS_SUPPORT instead of depending on it
nfs: fix incorrect error handling in LOCALIO
nfs: probe for LOCALIO when v3 client reconnects to server
nfs: probe for LOCALIO when v4 client reconnects to server
nfs/localio: remove redundant code and simplify LOCALIO enablement
nfs_common: add nfs_localio trace events
nfs_common: track all open nfsd_files per LOCALIO nfs_client
nfs_common: rename nfslocalio nfs_uuid_lock to nfs_uuids_lock
nfsd: nfsd_file_acquire_local no longer returns GC'd nfsd_file
nfsd: rename nfsd_serv_ prefixed methods and variables with nfsd_net_
nfsd: update percpu_ref to manage references on nfsd_net
...
Linus Torvalds [Tue, 28 Jan 2025 22:16:46 +0000 (14:16 -0800)]
Merge tag 'vfio-v6.14-rc1' of https://github.com/awilliam/linux-vfio
Pull vfio updates from Alex Williamson:
- Extend vfio-pci 8-byte read/write support to include archs defining
CONFIG_GENERIC_IOMAP, such as x86, and remove now extraneous #ifdefs
around 64-bit accessors (Ramesh Thomas)
- Update vfio-pci shadow ROM handling and allow cached ROM from setup
data to be exposed as a functional ROM BAR region when available
(Yunxiang Li)
- Update nvgrace-gpu vfio-pci variant driver for new Grace Blackwell
hardware, conditionalizing the uncached BAR workaround for previous
generation hardware based on the presence of a flag in a new DVSEC
capability, and include a delay during probe for link training to
complete, a new requirement for GB devices (Ankit Agrawal)
* tag 'vfio-v6.14-rc1' of https://github.com/awilliam/linux-vfio:
vfio/nvgrace-gpu: Add GB200 SKU to the devid table
vfio/nvgrace-gpu: Check the HBM training and C2C link status
vfio/nvgrace-gpu: Expose the blackwell device PF BAR1 to the VM
vfio/nvgrace-gpu: Read dvsec register to determine need for uncached resmem
vfio/platform: check the bounds of read/write syscalls
vfio/pci: Expose setup ROM at ROM bar when needed
vfio/pci: Remove shadow ROM specific code paths
vfio/pci: Remove #ifdef iowrite64 and #ifdef ioread64
vfio/pci: Enable iowrite64 and ioread64 for vfio pci
Ard Biesheuvel [Mon, 27 Jan 2025 11:43:37 +0000 (12:43 +0100)]
x86/sev: Disable jump tables in SEV startup code
When retpolines and IBT are both disabled, the compiler is free to use
jump tables to optimize switch instructions. However, these are emitted
by Clang as absolute references into .rodata:
Given that this code will execute before that address in .rodata has even
been mapped, it is guaranteed to crash a SEV-SNP guest in a way that is
difficult to diagnose.
So disable jump tables when building this code. It would be better if we
could attach this annotation to the __head macro but this appears to be
impossible.
Linus Torvalds [Tue, 28 Jan 2025 20:25:12 +0000 (12:25 -0800)]
Merge tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the big set of driver core and debugfs updates for 6.14-rc1.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at
least one user that does have a regression with these, but Al is
working on tracking down the fix for it. In my use (and everyone
else's linux-next use), it does not seem like a big issue at the
moment.
Here's a short list of the things in here:
- driver core rust bindings for PCI, platform, OF, and some i/o
functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing
things in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon""
* tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
rust: device: Use as_char_ptr() to avoid explicit cast
rust: device: Replace CString with CStr in property_present()
devcoredump: Constify 'struct bin_attribute'
devcoredump: Define 'struct bin_attribute' through macro
rust: device: Add property_present()
saner replacement for debugfs_rename()
orangefs-debugfs: don't mess with ->d_name
octeontx2: don't mess with ->d_parent or ->d_parent->d_name
arm_scmi: don't mess with ->d_parent->d_name
slub: don't mess with ->d_name
sof-client-ipc-flood-test: don't mess with ->d_name
qat: don't mess with ->d_name
xhci: don't mess with ->d_iname
mtu3: don't mess wiht ->d_iname
greybus/camera - stop messing with ->d_iname
mediatek: stop messing with ->d_iname
netdevsim: don't embed file_operations into your structs
b43legacy: make use of debugfs_get_aux()
b43: stop embedding struct file_operations into their objects
carl9170: stop embedding file_operations into their objects
...
Linus Torvalds [Tue, 28 Jan 2025 19:35:58 +0000 (11:35 -0800)]
Merge tag 'stop-machine.2025.01.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull stop_machine update from Paul McKenney:
"Move a misplaced call to rcu_momentary_eqs() from multi_cpu_stop() to
ensure that interrupts are disabled as required"
* tag 'stop-machine.2025.01.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
stop_machine: Fix rcu_momentary_eqs() call in multi_cpu_stop()
Linus Torvalds [Tue, 28 Jan 2025 19:34:03 +0000 (11:34 -0800)]
Merge tag 'csd-lock.2025.01.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull CSD-lock update from Paul McKenney:
"Allow runtime modification of the csd_lock_timeout and
panic_on_ipistall module parameters"
* tag 'csd-lock.2025.01.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
locking/csd-lock: make CSD lock debug tunables writable in /sys
Linus Torvalds [Tue, 28 Jan 2025 17:55:04 +0000 (09:55 -0800)]
Merge tag 'tty-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the tty/serial driver set of changes for 6.14-rc1. Nothing
major in here, it was delayed a bit due to a regression found in
linux-next which has now been reverted and verified that it is fixed.
Other than the reverts, highlights include:
- 8250 work to get the nbcon mode working (partially reverted)
- altera_jtaguart minor fixes
- fsl_lpuart minor updates
- sh-sci driver minor updatesa
- other tiny driver updates and cleanups
All of these have been in linux-next for a while, and now with no
reports of problems (thanks to the reverts)"
* tag 'tty-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (44 commits)
Revert "serial: 8250: Switch to nbcon console"
Revert "serial: 8250: Revert "drop lockdep annotation from serial8250_clear_IER()""
serial: sh-sci: Increment the runtime usage counter for the earlycon device
serial: sh-sci: Clean sci_ports[0] after at earlycon exit
serial: sh-sci: Do not probe the serial port if its slot in sci_ports[] is in use
serial: sh-sci: Move runtime PM enable to sci_probe_single()
serial: sh-sci: Drop __initdata macro for port_cfg
serial: kgdb_nmi: Remove unused knock code
tty: Permit some TIOCL_SETSEL modes without CAP_SYS_ADMIN
tty: xilinx_uartps: split sysrq handling
serial: 8250: Revert "drop lockdep annotation from serial8250_clear_IER()"
serial: 8250: Switch to nbcon console
serial: 8250: Provide flag for IER toggling for RS485
serial: 8250: Use high-level writing function for FIFO
serial: 8250: Use frame time to determine timeout
serial: 8250: Adjust the timeout for FIFO mode
tty: atmel_serial: Use of_property_present() for non-boolean properties
serial: sc16is7xx: Add polling mode if no IRQ pin is available
dt-bindings: serial: sc16is7xx: Add description for polling mode
tty: serial: atmel: make it selectable for ARCH_LAN969X
...
Linus Torvalds [Tue, 28 Jan 2025 17:01:36 +0000 (09:01 -0800)]
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull KVM/arm64 updates from Will Deacon:
"New features:
- Support for non-protected guest in protected mode, achieving near
feature parity with the non-protected mode
- Support for the EL2 timers as part of the ongoing NV support
- Allow control of hardware tracing for nVHE/hVHE
Improvements, fixes and cleanups:
- Massive cleanup of the debug infrastructure, making it a bit less
awkward and definitely easier to maintain. This should pave the way
for further optimisations
- Complete rewrite of pKVM's fixed-feature infrastructure, aligning
it with the rest of KVM and making the code easier to follow
- Large simplification of pKVM's memory protection infrastructure
- Better handling of RES0/RES1 fields for memory-backed system
registers
- Add a workaround for Qualcomm's Snapdragon X CPUs, which suffer
from a pretty nasty timer bug
- Small collection of cleanups and low-impact fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (87 commits)
arm64/sysreg: Get rid of TRFCR_ELx SysregFields
KVM: arm64: nv: Fix doc header layout for timers
KVM: arm64: nv: Apply RESx settings to sysreg reset values
KVM: arm64: nv: Always evaluate HCR_EL2 using sanitising accessors
KVM: arm64: Fix selftests after sysreg field name update
coresight: Pass guest TRFCR value to KVM
KVM: arm64: Support trace filtering for guests
KVM: arm64: coresight: Give TRBE enabled state to KVM
coresight: trbe: Remove redundant disable call
arm64/sysreg/tools: Move TRFCR definitions to sysreg
tools: arm64: Update sysreg.h header files
KVM: arm64: Drop pkvm_mem_transition for host/hyp donations
KVM: arm64: Drop pkvm_mem_transition for host/hyp sharing
KVM: arm64: Drop pkvm_mem_transition for FF-A
KVM: arm64: Explicitly handle BRBE traps as UNDEFINED
KVM: arm64: vgic: Use str_enabled_disabled() in vgic_v3_probe()
arm64: kvm: Introduce nvhe stack size constants
KVM: arm64: Fix nVHE stacktrace VA bits mask
KVM: arm64: Fix FEAT_MTE in pKVM
Documentation: Update the behaviour of "kvm-arm.mode"
...
Linus Torvalds [Tue, 28 Jan 2025 16:52:01 +0000 (08:52 -0800)]
Merge tag 'loongarch-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Migrate to the generic rule for built-in DTB
- Disable FIX_EARLYCON_MEM when ARCH_IOREMAP is enabled
- Derive timer max_delta from PRCFG1's timer_bits
- Correct the cacheinfo sharing information
- Add pgprot_nx() implementation
- Add debugfs entries to switch SFB/TSO state
- Change the maximum number of watchpoints
- Some bug fixes and other small changes
* tag 'loongarch-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Extend the maximum number of watchpoints
LoongArch: Change 8 to 14 for LOONGARCH_MAX_{BRP,WRP}
LoongArch: Add debugfs entries to switch SFB/TSO state
LoongArch: Fix warnings during S3 suspend
LoongArch: Adjust SETUP_SLEEP and SETUP_WAKEUP
LoongArch: Refactor bug_handler() implementation
LoongArch: Add pgprot_nx() implementation
LoongArch: Correct the __switch_to() prototype in comments
LoongArch: Correct the cacheinfo sharing information
LoongArch: Derive timer max_delta from PRCFG1's timer_bits
LoongArch: Disable FIX_EARLYCON_MEM when ARCH_IOREMAP is enabled
LoongArch: Migrate to the generic rule for built-in DTB
Heiko Carstens [Mon, 20 Jan 2025 10:53:42 +0000 (11:53 +0100)]
s390/sclp: Initialize sclp subsystem via arch_cpu_finalize_init()
With the switch to GENERIC_CPU_DEVICES an early call to the sclp subsystem
was added to smp_prepare_cpus(). This will usually succeed since the sclp
subsystem is implicitly initialized early enough if an sclp based console
is present.
If no such console is present the initialization happens with an
arch_initcall(); in such cases calls to the sclp subsystem will fail.
For CPU detection this means that the fallback sigp loop will be used
permanently to detect CPUs instead of the preferred READ_CPU_INFO sclp
request.
Fix this by adding an explicit early sclp_init() call via
arch_cpu_finalize_init().
Reported-by: Sheshu Ramanandan <sheshu.ramanandan@ibm.com> Fixes: 4a39f12e753d ("s390/smp: Switch to GENERIC_CPU_DEVICES") Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Linus Torvalds [Tue, 28 Jan 2025 16:38:30 +0000 (08:38 -0800)]
Merge tag 'sparc-for-6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc
Pull sparc updates from Andreas Larsson:
- Improve performance for reading /proc/interrupts
- Simplify irq code for sun4v
- Replace zero-length array with flexible array in struct for pci for
sparc64
* tag 'sparc-for-6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc:
sparc/irq: Remove unneeded if check in sun4v_cookie_only_virqs()
sparc/irq: Use str_enabled_disabled() helper function
sparc: replace zero-length array with flexible-array member
sparc/irq: use seq_put_decimal_ull_width() for decimal values
Heiko Carstens [Fri, 24 Jan 2025 13:51:52 +0000 (14:51 +0100)]
s390/tools: Use array instead of string initializer
The in-kernel disassembler intentionally uses nun-null terminated
strings in order to keep the arrays which contain mnemonics as small
as possible. GCC 15 however warns about this:
./arch/s390/include/generated/asm/dis-defs.h:1662:71: error: initializer-string
for array of ‘char’ is too long [-Werror=unterminated-string-initialization]
1662 | [1261] = { .opfrag = 0xea, .format = INSTR_SS_L0RDRD, .name = "unpka" }, \
Get rid of this warning by using array initializers.
Joel Granados [Tue, 28 Jan 2025 12:48:37 +0000 (13:48 +0100)]
treewide: const qualify ctl_tables where applicable
Add the const qualifier to all the ctl_tables in the tree except for
watchdog_hardlockup_sysctl, memory_allocation_profiling_sysctls,
loadpin_sysctl_table and the ones calling register_net_sysctl (./net,
drivers/inifiniband dirs). These are special cases as they use a
registration function with a non-const qualified ctl_table argument or
modify the arrays before passing them on to the registration function.
Constifying ctl_table structs will prevent the modification of
proc_handler function pointers as the arrays would reside in .rodata.
This is made possible after commit 78eb4ea25cd5 ("sysctl: treewide:
constify the ctl_table argument of proc_handlers") constified all the
proc_handlers.
Created this by running an spatch followed by a sed command:
Spatch:
virtual patch
@
depends on !(file in "net")
disable optional_qualifier
@
Reviewed-by: Song Liu <song@kernel.org> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> # for kernel/trace/ Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI Reviewed-by: Darrick J. Wong <djwong@kernel.org> # xfs Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Corey Minyard <cminyard@mvista.com> Acked-by: Wei Liu <wei.liu@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Bill O'Donnell <bodonnel@redhat.com> Acked-by: Baoquan He <bhe@redhat.com> Acked-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Acked-by: Anna Schumaker <anna.schumaker@oracle.com> Signed-off-by: Joel Granados <joel.granados@kernel.org>
Cosmin Ratiu [Mon, 27 Jan 2025 10:41:47 +0000 (12:41 +0200)]
bonding: Correctly support GSO ESP offload
The referenced fix is incomplete. It correctly computes
bond_dev->gso_partial_features across slaves, but unfortunately
netdev_fix_features discards gso_partial_features from the feature set
if NETIF_F_GSO_PARTIAL isn't set in bond_dev->features.
This is visible with ethtool -k bond0 | grep esp:
tx-esp-segmentation: off [requested on]
esp-hw-offload: on
esp-tx-csum-hw-offload: on
This patch reworks the bonding GSO offload support by:
- making aggregating gso_partial_features across slaves similar to the
other feature sets (this part is a no-op).
- advertising the default partial gso features on empty bond devs, same
as with other feature sets (also a no-op).
- adding NETIF_F_GSO_PARTIAL to hw_enc_features filtered across slaves.
- adding NETIF_F_GSO_PARTIAL to features in bond_setup()
With all of these, 'ethtool -k bond0 | grep esp' now reports:
tx-esp-segmentation: on
esp-hw-offload: on
esp-tx-csum-hw-offload: on
Fixes: 4861333b4217 ("bonding: add ESP offload features when slaves support") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com> Acked-by: Jay Vosburgh <jv@jvosburgh.net> Link: https://patch.msgid.link/20250127104147.759658-1-cratiu@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
====================
Limit devicetree parameters to hardware capability
This series includes patches that checks the devicetree properties,
the number of MTL queues and FIFO size values, and if these specified
values exceed the value contained in hardware capabilities, limit to
the values from the capabilities. Do nothing if the capabilities don't
have any specified values.
And this sets hardware capability values if FIFO sizes are not specified
and removes redundant lines.
====================
Kunihiko Hayashi [Mon, 27 Jan 2025 01:38:20 +0000 (10:38 +0900)]
net: stmmac: Specify hardware capability value when FIFO size isn't specified
When Tx/Rx FIFO size is not specified in advance, the driver checks if
the value is zero and sets the hardware capability value in functions
where that value is used.
Consolidate the check and settings into function stmmac_hw_init() and
remove redundant other statements.
If FIFO size is zero and the hardware capability also doesn't have upper
limit values, return with an error message.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by: Yanteng Si <si.yanteng@linux.dev> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Kunihiko Hayashi [Mon, 27 Jan 2025 01:38:19 +0000 (10:38 +0900)]
net: stmmac: Limit FIFO size by hardware capability
Tx/Rx FIFO size is specified by the parameter "{tx,rx}-fifo-depth" from
stmmac_platform layer.
However, these values are constrained by upper limits determined by the
capabilities of each hardware feature. There is a risk that the upper
bits will be truncated due to the calculation, so it's appropriate to
limit them to the upper limit values and display a warning message.
This only works if the hardware capability has the upper limit values.
Fixes: e7877f52fd4a ("stmmac: Read tx-fifo-depth and rx-fifo-depth from the devicetree") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by: Yanteng Si <si.yanteng@linux.dev> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Kunihiko Hayashi [Mon, 27 Jan 2025 01:38:18 +0000 (10:38 +0900)]
net: stmmac: Limit the number of MTL queues to hardware capability
The number of MTL queues to use is specified by the parameter
"snps,{tx,rx}-queues-to-use" from stmmac_platform layer.
However, the maximum numbers of queues are constrained by upper limits
determined by the capability of each hardware feature. It's appropriate
to limit the values not to exceed the upper limit values and display
a warning message.
This only works if the hardware capability has the upper limit values.
Fixes: d976a525c371 ("net: stmmac: multiple queues dt configuration") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by: Yanteng Si <si.yanteng@linux.dev> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Gal Pressman [Sun, 26 Jan 2025 19:18:45 +0000 (21:18 +0200)]
ethtool: Fix set RXNFC command with symmetric RSS hash
The sanity check that both source and destination are set when symmetric
RSS hash is requested is only relevant for ETHTOOL_SRXFH (rx-flow-hash),
it should not be performed on any other commands (e.g.
ETHTOOL_SRXCLSRLINS/ETHTOOL_SRXCLSRLDEL).
This resolves accessing uninitialized 'info.data' field, and fixes false
errors in rule insertion:
# ethtool --config-ntuple eth2 flow-type ip4 dst-ip 255.255.255.255 action -1 loc 0
rmgr: Cannot insert RX class rule: Invalid argument
Cannot insert classification rule
Fixes: 13e59344fb9d ("net: ethtool: add support for symmetric-xor RSS hash") Cc: Ahmed Zaki <ahmed.zaki@intel.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://patch.msgid.link/20250126191845.316589-1-gal@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
====================
usbnet: ipheth: prevent OoB reads of NDP16
iOS devices support two types of tethering over USB: regular, where the
internet connection is shared from the phone to the attached computer,
and reverse, where the internet connection is shared from the attached
computer to the phone.
The `ipheth` driver is responsible for regular tethering only. With this
tethering type, iOS devices support two encapsulation modes on RX:
legacy and NCM.
In "NCM mode", the iOS device encapsulates RX (phone->computer) traffic
in NCM Transfer Blocks (similarly to CDC NCM). However, unlike reverse
tethering, regular tethering is not compliant with the CDC NCM spec:
* Does not have the required CDC NCM descriptors
* TX (computer->phone) is not NCM-encapsulated at all
Thus `ipheth` implements a very limited subset of the spec with the sole
purpose of parsing RX URBs. This driver does not aim to be
a CDC NCM-compliant implementation and, in fact, can't be one because of
the points above.
For a complete spec-compliant CDC NCM implementation, there is already
the `cdc_ncm` driver. This driver is used for reverse tethering on iOS
devices. This patch series does not in any way change `cdc_ncm`.
In the first iteration of the NCM mode implementation in `ipheth`,
there were a few potential out of bounds reads when processing malformed
URBs received from a connected device:
* Only the start of NDP16 (wNdpIndex) was checked to fit in the URB
buffer.
* Datagram length check as part of DPEs could overflow.
* DPEs could be read past the end of NDP16 and even end of URB buffer
if a trailer DPE wasn't encountered.
The above is not expected to happen in normal device operation.
To address the above issues for iOS devices in NCM mode, rely on
and check for a specific fixed format of incoming URBs expected from
an iOS device:
* 12-byte NTH16
* 96-byte NDP16, allowing up to 22 DPEs (up to 21 datagrams + trailer)
On iOS, NDP16 directly follows NTH16, and its length is constant
regardless of the DPE count.
As the regular tethering implementation of iOS devices isn't compliant
with CDC NCM, it's not possible to use the `cdc_ncm` driver to handle
this functionality. Furthermore, while the logic required to properly
parse URBs with NCM-encapsulated frames is already part of said driver,
I haven't found a nice way to reuse the existing code without messing
with the `cdc_ncm` driver itself.
I didn't want to reimplement more of the spec than I absolutely had to,
because that work had already been done in `cdc_ncm`. Instead, to limit
the scope, I chose to rely on the specific URB format of iOS devices
that hasn't changed since the NCM mode was introduced there.
I tested each individual patch in the v5 series with iPhone 15 Pro Max,
iOS 18.2.1: compiled cleanly, ran iperf3 between phone and computer,
observed no errors in either kernel log or interface statistics.
v4 was Reviewed-by Jakub Kicinski <kuba@kernel.org>. Compared to v4,
v5 has no code changes. The two differences are:
* Patch "usbnet: ipheth: break up NCM header size computation"
moved later in the series, closer to a subsequent commit that makes
use of the change.
* In patch "usbnet: ipheth: refactor NCM datagram loop", removed
a stray paragraph in commit msg.
Above items are also noted in the changelogs of respective patches.
====================
Foster Snowhill [Sat, 25 Jan 2025 23:54:09 +0000 (00:54 +0100)]
usbnet: ipheth: document scope of NCM implementation
Clarify that the "NCM" implementation in `ipheth` is very limited, as
iOS devices aren't compatible with the CDC NCM specification in regular
tethering mode.
For a standards-compliant implementation, one shall turn to
the `cdc_ncm` module.
Cc: stable@vger.kernel.org # 6.5.x Signed-off-by: Foster Snowhill <forst@pen.gy> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Foster Snowhill [Sat, 25 Jan 2025 23:54:07 +0000 (00:54 +0100)]
usbnet: ipheth: break up NCM header size computation
Originally, the total NCM header size was computed as the sum of two
vaguely labelled constants. While accurate, it wasn't particularly clear
where they were coming from.
Use sizes of existing NCM structs where available. Define the total
NDP16 size based on the maximum amount of DPEs that can fit into the
iOS-specific fixed-size header.
This change does not fix any particular issue. Rather, it introduces
intermediate constants that will simplify subsequent commits.
It should also make it clearer for the reader where the constant values
come from.
Cc: stable@vger.kernel.org # 6.5.x Signed-off-by: Foster Snowhill <forst@pen.gy> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Foster Snowhill [Sat, 25 Jan 2025 23:54:06 +0000 (00:54 +0100)]
usbnet: ipheth: refactor NCM datagram loop
Introduce an rx_error label to reduce repetitions in the header
signature checks.
Store wDatagramIndex and wDatagramLength after endianness conversion to
avoid repeated le16_to_cpu() calls.
Rewrite the loop to return on a null trailing DPE, which is required
by the CDC NCM spec. In case it is missing, fall through to rx_error.
This change does not fix any particular issue. Its purpose is to
simplify a subsequent commit that fixes a potential OoB read by limiting
the maximum amount of processed DPEs.
Cc: stable@vger.kernel.org # 6.5.x Signed-off-by: Foster Snowhill <forst@pen.gy> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Foster Snowhill [Sat, 25 Jan 2025 23:54:05 +0000 (00:54 +0100)]
usbnet: ipheth: use static NDP16 location in URB
Original code allowed for the start of NDP16 to be anywhere within the
URB based on the `wNdpIndex` value in NTH16. Only the start position of
NDP16 was checked, so it was possible for even the fixed-length part
of NDP16 to extend past the end of URB, leading to an out-of-bounds
read.
On iOS devices, the NDP16 header always directly follows NTH16. Rely on
and check for this specific format.
This, along with NCM-specific minimal URB length check that already
exists, will ensure that the fixed-length part of NDP16 plus a set
amount of DPEs fit within the URB.
Note that this commit alone does not fully address the OoB read.
The limit on the amount of DPEs needs to be enforced separately.
Foster Snowhill [Sat, 25 Jan 2025 23:54:04 +0000 (00:54 +0100)]
usbnet: ipheth: check that DPE points past NCM header
By definition, a DPE points at the start of a network frame/datagram.
Thus it makes no sense for it to point at anything that's part of the
NCM header. It is not a security issue, but merely an indication of
a malformed DPE.
Enforce that all DPEs point at the data portion of the URB, past the
NCM header.
Thomas Weißschuh [Sat, 25 Jan 2025 09:28:38 +0000 (10:28 +0100)]
ptp: Properly handle compat ioctls
Pointer arguments passed to ioctls need to pass through compat_ptr() to
work correctly on s390; as explained in Documentation/driver-api/ioctl.rst.
Detect compat mode at runtime and call compat_ptr() for those commands
which do take pointer arguments.
Nikita Zhandarovich [Fri, 24 Jan 2025 09:30:20 +0000 (01:30 -0800)]
net: usb: rtl8150: enable basic endpoint checking
Syzkaller reports [1] encountering a common issue of utilizing a wrong
usb endpoint type during URB submitting stage. This, in turn, triggers
a warning shown below.
For now, enable simple endpoint checking (specifically, bulk and
interrupt eps, testing control one is not essential) to mitigate
the issue with a view to do other related cosmetic changes later,
if they are necessary.
Nathan Chancellor [Thu, 23 Jan 2025 02:54:27 +0000 (19:54 -0700)]
s390: Add '-std=gnu11' to decompressor and purgatory CFLAGS
GCC changed the default C standard dialect from gnu17 to gnu23,
which should not have impacted the kernel because it explicitly requests
the gnu11 standard in the main Makefile. However, there are certain
places in the s390 code that use their own CFLAGS without a '-std='
value, which break with this dialect change because of the kernel's own
definitions of bool, false, and true conflicting with the C23 reserved
keywords.
include/linux/stddef.h:11:9: error: cannot use keyword 'false' as enumeration constant
11 | false = 0,
| ^~~~~
include/linux/stddef.h:11:9: note: 'false' is a keyword with '-std=c23' onwards
include/linux/types.h:35:33: error: 'bool' cannot be defined via 'typedef'
35 | typedef _Bool bool;
| ^~~~
include/linux/types.h:35:33: note: 'bool' is a keyword with '-std=c23' onwards
Add '-std=gnu11' to the decompressor and purgatory CFLAGS to eliminate
these errors and make the C standard version of these areas match the
rest of the kernel.
Linus Torvalds [Tue, 28 Jan 2025 04:58:58 +0000 (20:58 -0800)]
Merge tag 'f2fs-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this series, there are several major improvements such as folio
conversion by Matthew, speed-up of block truncation, and caching more
dentry pages.
In addition, we implemented a linear dentry search to address recent
unicode regression, and figured out some false alarms that we could
get rid of.
Enhancements:
- foilio conversion in various IO paths
- optimize f2fs_truncate_data_blocks_range()
- cache more dentry pages
- remove unnecessary blk_finish_plug
- procfs: show mtime in segment_bits
Bug fixes:
- introduce linear search for dentries
- don't call block truncation for aliased file
- fix using wrong 'submitted' value in f2fs_write_cache_pages
- fix to do sanity check correctly on i_inline_xattr_size
- avoid trying to get invalid block address
- fix inconsistent dirty state of atomic file"
* tag 'f2fs-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (32 commits)
f2fs: fix inconsistent dirty state of atomic file
f2fs: fix to avoid changing 'check only' behaior of recovery
f2fs: Clean up the loop outside of f2fs_invalidate_blocks()
f2fs: procfs: show mtime in segment_bits
f2fs: fix to avoid return invalid mtime from f2fs_get_section_mtime()
f2fs: Fix format specifier in sanity_check_inode()
f2fs: avoid trying to get invalid block address
f2fs: fix to do sanity check correctly on i_inline_xattr_size
f2fs: remove blk_finish_plug
f2fs: Optimize f2fs_truncate_data_blocks_range()
f2fs: fix using wrong 'submitted' value in f2fs_write_cache_pages
f2fs: add parameter @len to f2fs_invalidate_blocks()
f2fs: update_sit_entry_for_release() supports consecutive blocks.
f2fs: introduce update_sit_entry_for_release/alloc()
f2fs: don't call block truncation for aliased file
f2fs: Introduce linear search for dentries
f2fs: add parameter @len to f2fs_invalidate_internal_cache()
f2fs: expand f2fs_invalidate_compress_page() to f2fs_invalidate_compress_pages_range()
f2fs: ensure that node info flags are always initialized
f2fs: The GC triggered by ioctl also needs to mark the segno as victim
...
This interoperates with similar functionality introduced into the
Linux NFS client in v6.11. An attribute delegation permits an NFS
client to manage a file's mtime, rather than flushing dirty data to
the NFS server so that the file's mtime reflects the last write, which
is considerably slower.
Neil Brown contributed dynamic NFSv4.1 session slot table resizing.
This facility enables NFSD to increase or decrease the number of slots
per NFS session depending on server memory availability. More session
slots means greater parallelism.
Chuck Lever fixed a long-standing latent bug where NFSv4 COMPOUND
encoding screws up when crossing a page boundary in the encoding
buffer. This is a zero-day bug, but hitting it is rare and depends on
the NFS client implementation. The Linux NFS client does not happen to
trigger this issue.
A variety of bug fixes and other incremental improvements fill out the
list of commits in this release. Great thanks to all contributors,
reviewers, testers, and bug reporters who participated during this
development cycle"
* tag 'nfsd-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (42 commits)
sunrpc: Remove gss_{de,en}crypt_xdr_buf deadcode
sunrpc: Remove gss_generic_token deadcode
sunrpc: Remove unused xprt_iter_get_xprt
Revert "SUNRPC: Reduce thread wake-up rate when receiving large RPC messages"
nfsd: implement OPEN_ARGS_SHARE_ACCESS_WANT_OPEN_XOR_DELEGATION
nfsd: handle delegated timestamps in SETATTR
nfsd: add support for delegated timestamps
nfsd: rework NFS4_SHARE_WANT_* flag handling
nfsd: add support for FATTR4_OPEN_ARGUMENTS
nfsd: prepare delegation code for handing out *_ATTRS_DELEG delegations
nfsd: rename NFS4_SHARE_WANT_* constants to OPEN4_SHARE_ACCESS_WANT_*
nfsd: switch to autogenerated definitions for open_delegation_type4
nfs_common: make include/linux/nfs4.h include generated nfs4_1.h
nfsd: fix handling of delegated change attr in CB_GETATTR
SUNRPC: Document validity guarantees of the pointer returned by reserve_space
NFSD: Insulate nfsd4_encode_fattr4() from page boundaries in the encode buffer
NFSD: Insulate nfsd4_encode_secinfo() from page boundaries in the encode buffer
NFSD: Refactor nfsd4_do_encode_secinfo() again
NFSD: Insulate nfsd4_encode_readlink() from page boundaries in the encode buffer
NFSD: Insulate nfsd4_encode_read_plus_data() from page boundaries in the encode buffer
...
Linus Torvalds [Tue, 28 Jan 2025 01:06:42 +0000 (17:06 -0800)]
Merge tag 'for-6.14/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- fix a spelling error in dm-raid
- change kzalloc to kcalloc
- remove useless test in alloc_multiple_bios
- disable REQ_NOWAIT for flushes
- dm-transaction-manager: use red-black trees instead of linear lists
- atomic writes support for dm-linear, dm-stripe and dm-mirror
- dm-crypt: code cleanups and two bugfixes
* tag 'for-6.14/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-crypt: track tag_offset in convert_context
dm-crypt: don't initialize cc_sector again
dm-crypt: don't update io->sector after kcryptd_crypt_write_io_submit()
dm-crypt: use bi_sector in bio when initialize integrity seed
dm-crypt: fully initialize clone->bi_iter in crypt_alloc_buffer()
dm-crypt: set atomic as false when calling crypt_convert() in kworker
dm-mirror: Support atomic writes
dm-io: Warn on creating multiple atomic write bios for a region
dm-stripe: Enable atomic writes
dm-linear: Enable atomic writes
dm: Ensure cloned bio is same length for atomic write
dm-table: atomic writes support
dm-transaction-manager: use red-black trees instead of linear lists
dm: disable REQ_NOWAIT for flushes
dm: remove useless test in alloc_multiple_bios
dm: change kzalloc to kcalloc
dm raid: fix spelling errors in raid_ctr()
projects / users / dwmw2 / linux.git / log