If a DM device was suspended when bios were issued to it, those bios
would be deferred using queue_io(). Once the DM device was resumed
dm_process_bio() could be called by dm_wq_work() for original bio that
still needs splitting. dm_process_bio()'s check for current->bio_list
(meaning call chain is within ->submit_bio) as a prerequisite for
calling blk_queue_split() for "abnormal IO" would result in
dm_process_bio() never imposing corresponding queue_limits
(e.g. discard_granularity, discard_max_bytes, etc).
Fix this by always having dm_wq_work() resubmit deferred bios using
submit_bio_noacct().
Side-effect is blk_queue_split() is always called for "abnormal IO" from
->submit_bio, be it from application thread or dm_wq_work() workqueue,
so proper bio splitting and depth-first bio submission is performed.
For sake of clarity, remove current->bio_list check before call to
blk_queue_split().
Also, remove dm_wq_work()'s use of dm_{get,put}_live_table() -- no
longer needed since IO will be reissued in terms of ->submit_bio.
And rename bio variable from 'c' to 'bio'.
The name allocated for the regmap_config structure is freed
pretty early, right after the registration of the MMIO region.
Unfortunately, that doesn't follow the life cycle that debugfs
expects, as it can access the name field long after the free
has occurred.
Move the free on the error path, and keep it forever otherwise.
Fixes: e15d7f2b81d2 ("mfd: syscon: Use a unique name with regmap_config") Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The best way to fix this is to eliminate the CPU0
port->mutex/work-completion scenario. So we suggest to register and
unregister the clock-notifier during the DW APB UART port probe/remove
procedures, instead of doing that at the points of the port
startup/shutdown.
It is erroneous to update the TTY port baud rate if it hasn't been
initialized yet, because in that case the TTY struct isn't set. So there
is no termios structure to get and re-calculate the baud if the current
baud can't be reached. Let's skip the baud rate update then until the port
is fully initialized.
Note the update UART clock method still sets the uartclk member with a new
ref clock value even if the port is turned off. The new UART ref clock
rate will be used later on the port starting up procedure.
Fixes: 868f3ee6e452 ("serial: 8250: Add 8250 port clock update method") Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20200923161950.6237-3-Sergey.Semin@baikalelectronics.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
It has been a mistake to add the MCR register RTS/DTS fields setting in
the generic method of the UART reference clock update. There is no point
in asserting these lines at that procedure. Just discard the
serial8250_out_MCR() mathod invocation from there then.
Fixes: 868f3ee6e452 ("serial: 8250: Add 8250 port clock update method") Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20200923161950.6237-2-Sergey.Semin@baikalelectronics.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
It appears that almost traditionally the H variants have some deviations
in the register offsets in comparison to LP ones. This is the case for
Intel Tiger Lake as well. Fix register offsets for TGL-H variant.
Fixes: 653d96455e1e ("pinctrl: tigerlake: Add support for Tiger Lake-H") Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20200929110306.40852-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Chasing the callers of enic_dev_wait() revealed the gems of enic_reset()
and enic_tx_hang_reset() which are both invoked through work queues in
order to be able to call rtnl_lock(). So far so good.
After locking rtnl both functions acquire enic::enic_api_lock which
serializes against the (ab)use from infiniband. This is where the
trainwreck starts.
enic::enic_api_lock is a spin_lock() which implicitly disables preemption,
but both functions invoke a ton of functions under that lock which can
sleep. The BUG_ON(in_interrupt()) does not trigger in that case because it
can't detect the preempt disabled condition.
This clearly has never been tested with any of the mandatory debug options
for 7+ years, which would have caught that for sure.
Cure it by adding a enic_api_busy member to struct enic, which is modified
and evaluated with enic::enic_api_lock held.
If enic_api_devcmd_proxy_by_index() observes enic::enic_api_busy as true,
it drops enic::enic_api_lock and busy waits for enic::enic_api_busy to
become false.
It would be smarter to wait for a completion of that busy period, but
enic_api_devcmd_proxy_by_index() is called with other spin locks held which
obviously can't sleep.
Remove the BUG_ON(in_interrupt()) check as well because it's incomplete and
with proper debugging enabled the problem would have been caught from the
debug checks in schedule_timeout().
Fixes: 0b038566c0ea ("drivers/net: enic: Add an interface for USNIC to interact with firmware") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the ADC is runtime suspended and starting a conversion, the stm32-adc
driver calls pm_runtime_get_sync() that gets cascaded to the parent
(e.g. runtime resume of stm32-adc-core driver). This also kicks the
autosuspend delay (e.g. 2s) of the parent.
Once the ADC is active, calling pm_runtime_get_sync() again (upon a new
capture) won't kick the autosuspend delay for the parent (stm32-adc-core
driver) as already active.
Currently, this makes the stm32-adc-core driver go in suspend state
every 2s when doing slow polling. As an example, doing a capture, e.g.
cat in_voltageY_raw at a 0.2s rate, the auto suspend delay for the parent
isn't refreshed. Once it expires, the parent immediately falls into
runtime suspended state, in between two captures, as soon as the child
driver falls into runtime suspend state:
- e.g. after 2s, + child calls pm_runtime_put_autosuspend() + 100ms
autosuspend delay of the child.
- stm32-adc-core switches off regulators, clocks and so on.
- They get switched on back again 100ms later in this example (at 2.2s).
So, use runtime_idle() callback in stm32-adc-core driver to call
pm_runtime_mark_last_busy() for the parent driver (stm32-adc-core),
to avoid this.
if of_find_device_by_node() succeed, qcom_iommu_of_xlate() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.
Fixes: 0ae349a0f33f ("iommu/qcom: Add qcom_iommu") Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20200929014037.2436663-1-yukuai3@huawei.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The Aspeed pinconf data structures are split into 'conf' and 'map'
types, where the 'conf' struct defines which register and bitfield to
manipulate, while the 'map' struct defines what value to write to
the register and bitfield.
Both structs have a mask member, and the wrong mask was being used to
tell the regmap which bits to update.
A todo is to look at whether we can remove the mask from the 'map'
struct.
Fixes: 5f52c853847f ("pinctrl: aspeed: Use masks to describe pinconf bitfields") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Cc: Johnny Huang <johnny_huang@aspeedtech.com> Link: https://lore.kernel.org/r/20200910025631.2996342-3-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently if an unsupported iftype is detected the error return path
does not free the cmd_skb leading to a resource leak. Fix this by
free'ing cmd_skb.
Addresses-Coverity: ("Resource leak") Fixes: 805b28c05c8e ("qtnfmac: prepare for AP_VLAN interface type support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200925132224.21638-1-colin.king@canonical.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The test_overhead prog_test included an fmod_ret program that attached to
__set_task_comm() in the kernel. However, this function was never listed as
allowed for return modification, so this only worked because of the
verifier skipping tests when a trampoline already existed for the attach
point. Now that the verifier checks have been fixed, remove fmod_ret from
the test so it works again.
Fixes: 4eaf0b5c5e04 ("selftest/bpf: Fmod_ret prog and implement test_overhead as part of bench") Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
From the checks and commit messages for modify_return, it seems it was
never the intention that it should be possible to attach a tracing program
with expected_attach_type == BPF_MODIFY_RETURN to another BPF program.
However, check_attach_modify_return() will only look at the function name,
so if the target function starts with "security_", the attach will be
allowed even for bpf2bpf attachment.
Fix this oversight by also blocking the modification if a target program is
supplied.
Set up the speed according to crq->query_phys_parms.rsp.speed.
Fix IBMVNIC_10GBPS typo.
Fixes: f8d6ae0d27ec ("ibmvnic: Report actual backing device speed and duplex values") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
In commit f188b5e76aae ("coresight: etm4x: Save/restore state
across CPU low power states"), mistakenly TRCVMIDCCTLR1 register
value was saved in trcvmidcctlr0 state variable which is used to
store TRCVMIDCCTLR0 register value in etm4x_cpu_save() and then
same value is written back to both TRCVMIDCCTLR0 and TRCVMIDCCTLR1
in etm4x_cpu_restore(). There is already a trcvmidcctlr1 state
variable available for TRCVMIDCCTLR1, so use it.
Fixes: f188b5e76aae ("coresight: etm4x: Save/restore state across CPU low power states") Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200928163513.70169-26-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
During module unload, a coresight driver module will call back into
the CTI driver to remove any links between the two devices.
The current code has 2 issues:-
1) in the CTI driver the matching code is matching to the wrong device
so misses all the links.
2) The callback is called too late in the unload process resulting in a
crash.
CTI code to remove sysfs link to other devices on shutdown, incorrectly
tries to remove a single ended link when these are all double ended. This
implementation leaves elements in the link info structure undefined which
results in a crash in recent tests for driver module unload.
This patch corrects the link removal code.
Fixes: 73274abb6557 ("coresight: cti: Add in sysfs links to other coresight devices") Reported-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200928163513.70169-18-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When coresight_build_path() fails on all the cpus, etm_setup_aux
calls etm_free_aux() to free allocated event_data.
WARN_ON(cpumask_empty(mask) will be triggered since cpu mask is empty.
Check event_data->snk_config is not NULL first to avoid this
warning.
We can skip most of the initialisation, although spinlocks still
need explicit initialisation as architectures may use a non-zero
value to indicate unlocked. The comment is no longer useful as
attach_page_private() handles the refcount now.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The SRG min and max offset won't present when SRG Information Present of
SR control field of Spatial Reuse Parameter Set element set to 0. Per
spec. IEEE802.11ax D7.0, SRG OBSS PD Min Offset ≤ SRG OBSS PD Max
Offset. Hence fix the constrain check to allow same values in both
offset and also call appropriate nla_get function to read the values.
Fix missing 'kfree_const(cell->name)' when call to
nvmem_cell_info_to_nvmem_cell() in several places:
* after nvmem_cell_info_to_nvmem_cell() failed during
nvmem_add_cells()
* during nvmem_device_cell_{read,write} when cell->name is
kstrdup'ed() without calling kfree_const() at the end, but
really there is no reason to do that 'dup, because the cell
instance is allocated on the stack for some short period to be
read/write without exposing it to the caller.
So the new nvmem_cell_info_to_nvmem_cell_nodup() helper is introduced
which is used to convert cell_info -> cell without name duplication as
a lighweight version of nvmem_cell_info_to_nvmem_cell().
aarch64-linux-gnu-ld: drivers/tty/serial/imx_earlycon.o: in function `imx_uart_console_early_write':
imx_earlycon.c:(.text+0x84): undefined reference to `uart_console_write'
The driver uses the uart_console_write(), but SERIAL_CORE_CONSOLE is not
selected, so uart_console_write is not defined, then we get the error.
Fix this by selecting SERIAL_CORE_CONSOLE.
aarch64-linux-gnu-ld: drivers/tty/hvc/hvc_dcc.o: in function `dcc_early_write':
hvc_dcc.c:(.text+0x164): undefined reference to `uart_console_write'
The driver uses the uart_console_write(), but SERIAL_CORE_CONSOLE is not
selected, so uart_console_write is not defined, then we get the error.
Fix this by selecting SERIAL_CORE_CONSOLE.
With commit 4f3882177240 hid-input started clearing of "ignored" usages
to avoid using garbage that might have been left in them. However
"battery strength" usages should not be ignored, as we do want to
use them.
The current CRTC state reset hook in vc4 allocates a vc4_crtc_state
structure as a drm_crtc_state, and relies on the fact that vc4_crtc_state
embeds drm_crtc_state as its first member, and therefore can be safely
cast.
However, this is pretty fragile especially since there's no check for this
in place, and we're going to need to access vc4_crtc_state member at reset
so this looks like a good occasion to make it more robust.
Fixes: 6d6e50039187 ("drm/vc4: Allocate the right amount of space for boot-time CRTC state.") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200923084032.218619-1-maxime@cerno.tech Signed-off-by: Sasha Levin <sashal@kernel.org>
Let the controller logic decide when to enter into clock pause mode!
Entering in to pause mode during unregistration does not really make
sense as the controller is totally going down at that point in time.
logical address can be either assigned by the SLIMBus controller or the core.
Core uses IDA in cases where get_addr callback is not provided by the
controller.
Core already has this check while allocating IDR, however during absence
reporting this is not checked. This patch fixes this issue.
Fixes: 498c60153ebb ("quota: Implement quota format with 64-bit space and inode limits") Link: https://lore.kernel.org/r/20200924183619.4176790-1-edumazet@google.com Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jan Kara <jack@suse.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
Set poll timeout to 3s for mt7622 devices in order to avoid fw hangs.
Swap mt7622_trigger_hif_int and doorbell configuration order in
mt7615_mcu_drv_pmctrl routine.
Introduce mt7615_mcu_lp_drv_pmctrl routine to take care of drv_own
configuration for runtime-pm.
Fixes: 08523a2a1db5 ("mt76: mt7615: add mt7615_pm_wake utility routine") Fixes: 894b7767ec2f ("mt76: mt7615: improve mt7615_driver_own reliability") Fixes: 757b0e7fd6f4 ("mt76: mt7615: avoid polling in fw_own for mt7663") Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
Introduce set_drv_ctrl and set_fw_ctrl function pointers in
mt7615_mcu_ops data structure. This is a preliminary patch to enable
runtime-pm for non-pci chipsets
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix a possible NULL pointer dereference in mt76_testmode_dump() since
nla_nest_start returns NULL in case of error
Fixes: f0efa8621550e ("mt76: add API for testmode support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
Initialize wcid to global_wcid if msta is NULL in mt7615_pm_wake_work
routine since wcid will be dereferenced running mt76_tx()
Fixes: 2b8cdfb28d340 ("mt76: mt7615: wake device before pushing frames in mt7615_tx") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix a memory leak in mt7615_tm_set_tx_power routine if
mt7615_eeprom_get_target_power_index fails.
Moreover do not account req_header twice in mcu skb allocation.
Fixes: 4f0bce1c88882 ("mt76: mt7615: implement testmode support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: ea4906c4be49 ("mt76: mt7615: wake device before accessing regmap in debugfs") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
If rtw_core_init() fails to load the wow firmware, rtw_core_deinit()
will not get called to clean up the regular firmware.
Ensure that an error loading the wow firmware does not produce an oops
for the regular firmware by waiting on its completion to be signalled
before returning. Also release the loaded firmware.
Fixes: c8e5695eae99 ("rtw88: load wowlan firmware if wowlan is supported") Cc: Chin-Yen Lee <timlee@realtek.com> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200920132621.26468-3-afaerber@suse.de Signed-off-by: Sasha Levin <sashal@kernel.org>
To avoid this, wait on the completion callbacks in rtw_core_deinit()
before releasing firmware and continuing teardown.
Note that rtw_wait_firmware_completion() was introduced with c8e5695eae9959fc5774c0f490f2450be8bad3de ("rtw88: load wowlan firmware
if wowlan is supported"), so backports to earlier branches may need to
inline wait_for_completion(&rtwdev->fw.completion) instead.
Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Fixes: c8e5695eae99 ("rtw88: load wowlan firmware if wowlan is supported") Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200920132621.26468-2-afaerber@suse.de Signed-off-by: Sasha Levin <sashal@kernel.org>
Call dwc2_debugfs_exit() and dwc2_hcd_remove() (if the HCD was enabled
earlier) when usb_add_gadget_udc() has failed. This ensures that the
debugfs entries created by dwc2_debugfs_init() as well as the HCD are
cleaned up in the error path.
Fixes: 207324a321a866 ("usb: dwc2: Postponed gadget registration to the udc class driver") Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the maximum_speed is not specified, default the device speed base on
its HW capability. Don't prematurely check HW capability before
validating the maximum_speed device property. The device property takes
precedence in dwc->maximum_speed.
Fixes: 0e1e5c47f7a9 ("usb: dwc3: add support for USB 2.0-only core configuration") Reported-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
CFI validates that all indirect calls go to a function with the same
exact function pointer prototype. In this case, dwc2_set_bcm_params
is the target, which has a parameter of type 'struct dwc2_hsotg *',
but it is being implicitly cast to have a parameter of type 'void *'
because that is the set_params function pointer prototype. Make the
function pointer protoype match the definitions so that there is no
more violation.
Recently we applied a fix to cover the whole OSS sequencer ioctls with
the mutex for dealing with the possible races. This works fine in
general, but in theory, this may lead to unexpectedly long stall if an
ioctl like SNDCTL_SEQ_SYNC is issued and an event with the far future
timestamp was queued.
For fixing such a potential stall, this patch changes the mutex lock
applied conditionally excluding such an ioctl command. Also, change
the mutex_lock() with the interruptible version for user to allow
escaping from the big-hammer mutex.
Inside __scif_pin_pages(), when map_flags != SCIF_MAP_KERNEL it
will call pin_user_pages_fast() to map nr_pages. However,
pin_user_pages_fast() might fail with a return value -ERRNO.
The return value is stored in pinned_pages->nr_pages. which in
turn is passed to unpin_user_pages(), which expects
pinned_pages->nr_pages >=0, else disaster.
Fix this by assigning pinned_pages->nr_pages to 0 if
pin_user_pages_fast() returns -ERRNO.
Fixes: ba612aa8b487 ("misc: mic: SCIF memory registration and unregistration") Cc: John Hubbard <jhubbard@nvidia.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Link: https://lore.kernel.org/r/1600570295-29546-1-git-send-email-jrdr.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When SND_SOC_CROS_EC_CODEC is enabled and CRYPTO is disabled, it results
in the following Kbuild warning:
WARNING: unmet direct dependencies detected for CRYPTO_LIB_SHA256
Depends on [n]: CRYPTO [=n]
Selected by [y]:
- SND_SOC_CROS_EC_CODEC [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && CROS_EC [=y]
The reason is that SND_SOC_CROS_EC_CODEC selects CRYPTO_LIB_SHA256 without
depending on or selecting CRYPTO while CRYPTO_LIB_SHA256 is subordinate to
CRYPTO.
Honor the kconfig menu hierarchy to remove kconfig dependency warnings.
Fixes: 93fa0af4790a ("ASoC: cros_ec_codec: switch to library API for SHA-256") Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com> Link: https://lore.kernel.org/r/20200917141803.92889-1-fazilyildiran@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
drivers/phy/rockchip/phy-rockchip-dphy-rx0.c: In function 'rk_dphy_enable':
drivers/phy/rockchip/phy-rockchip-dphy-rx0.c:203:2: error: implicit declaration of function 'usleep_range' [-Werror=implicit-function-declaration]
The reference to the VSP device acquired with of_find_device_by_node()
in rcar_du_vsp_init() is never released. Fix it with a drmm action,
which gets run both in the probe error path and in the remove path.
Fixes: 6d62ef3ac30b ("drm: rcar-du: Expose the VSP1 compositor through KMS planes") Reported-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The "tsid" is a user controlled u8 which comes from debugfs. Values
more than 15 are invalid because "active_tsids" is a 16 bit variable.
If the value of "tsid" is more than 31 then that leads to a shift
wrapping bug.
Fixes: 8fffd9e5ec9e ("ath6kl: Implement support for QOS-enable and QOS-disable from userspace") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200918142732.GA909725@mwanda Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit 13d515c796 (spi: omap2-mcspi: Switch to
readl_poll_timeout()).
The amount of time spent polling for the MCSPI_CHSTAT bits to be set on
AM335x-icev2 platform is less than 1us (about 0.6us) in most cases, with
or without using DMA. So, in most cases the function need not sleep.
Also, setting the sleep_usecs to zero would not be optimal here because
ktime_add_us() used in readl_poll_timeout() is slower compared to the
direct addition used after the revert. So, it is sub-optimal to use
readl_poll_timeout in this case.
When DMA is not enabled, this revert results in an increase of about 27%
in throughput and decrease of about 20% in CPU usage. However, the CPU
usage and throughput are almost the same when used with DMA.
Therefore, fix this by reverting the commit which switched to using
readl_poll_timeout().
Fixes: 13d515c796ad ("spi: omap2-mcspi: Switch to readl_poll_timeout()") Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20200910122624.8769-1-a-govindraju@ti.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix the unbalanced call to the pm_runtime_disable when removing the
module. pm_runtime_enable is not called nor is the pm_runtime setup in
the code. Remove the i2c_remove function and the pm_runtime_disable.
Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200918190548.12598-5-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Current code expects a single channel to be always used. Fix this
situation by forwarding the number of channels used. Then fix the
derivation of the bdiv clock rate.
snd_soc_update_bits returns a 1 when the bit was successfully updated,
returns a 0 is no update was needed and a negative if the call failed.
The code is currently failing the case of a successful update by just
checking for a non-zero number. Modify these checks and return the error
code only if there is a negative.
Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200918190548.12598-7-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The devicetree binding indicates that the ti,asi-format, ti,imon-slot-no
and ti,vmon-slot-no are not required but the driver requires them or it
fails to probe. Honor the binding and allow these entries to be optional
and set the corresponding values to the default values for each as defined
in the data sheet.
Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200918190548.12598-4-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
tas2770_reset is called during i2c probe. The reset calls the
snd_soc_component_write which depends on the tas2770->component being
available. The component pointer is not set until codec_probe so move
the reset to the codec_probe after the pointer is set.
Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200918190548.12598-1-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The wilc_wfi_init_mon_int() forgets to clean up resource when
register_netdevice() failed. Add the missed call to fix it.
And the return value of netdev_priv can't be NULL, so remove
the unnecessary error handling.
Fixes: 588713006ea4 ("staging: wilc1000: avoid the use of 'wilc_wfi_mon' static variable") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Huang Guobin <huangguobin4@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200917123019.206382-1-huangguobin4@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The VLANs and PVIDs on the RTL8366 utilizes a "member
configuration" (MC) which is largely unexplained in the
code.
This set-up requires a special ordering: rtl8366_set_pvid()
must be called first, followed by rtl8366_set_vlan(),
else the MC will not be properly allocated. Relax this
by factoring out the code obtaining an MC and reuse
the helper in both rtl8366_set_pvid() and
rtl8366_set_vlan() so we remove this strict ordering
requirement.
In the process, add some better comments and debug prints
so people who read the code understand what is going on.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The rtl8366_set_vlan() and rtl8366_set_pvid() get invalid
VLANs tossed at it, especially VLAN0, something the hardware
and driver cannot handle. Check validity and bail out like
we do in the other callbacks.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 604234f33658 ("drm/msm: Enable expanded apriv support for a650")
was checking the result of adreno_is_a650() before the gpu revision
got probed in adreno_gpu_init() so it was always coming across as
false. Snoop into the revision ID ahead of time to correctly set the
hw_apriv flag so that it can be used by msm_gpu to properly setup
global buffers.
Fixes: 604234f33658 ("drm/msm: Enable expanded apriv support for a650") Reported-by: Jonathan Marek <jonathan@marek.ca> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Tested-by: Jonathan Marek <jonathan@marek.ca> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Make sure xHC completes the configure endpoint command and xhci driver
sets the ring pointers correctly before we create the user readable
debugfs file.
In theory there was a small gap where a user could have read the
debugfs file and cause a NULL pointer dereference error as ring
pointer was not yet set, in practise we want this change to simplify
the upcoming streams debugfs support.
Currently the code auto-creates hci_conn only if the remote address has
been discovered before. This may not be the case. For example, the
remote device may trigger connection after reboot at already-paired
state so there is no inquiry result found, but it is still correct to
create the hci_conn when Connection Complete event is received.
A better guard is to check against bredr allowlist. Devices in the
allowlist have been given permission to auto-connect.
Now the K3 UDMA glue layer enable functions perform RMW operation on UDMA
RX/TX RT_CTL registers to set EN bit and enable channel, which is
incorrect, because only EN bit has to be set in those registers to enable
channel (all other bits should be cleared 0).
More over, this causes issues when bootloader leaves UDMA channel RX/TX
RT_CTL registers in incorrect state - TDOWN bit set, for example. As
result, UDMA channel will just perform teardown right after it's enabled.
Hence, fix it by writing correct values (EN=1) directly in UDMA channel
RX/TX RT_CTL registers in k3_udma_glue_enable_tx/rx_chn() functions.
Fixes: d70241913413 ("dmaengine: ti: k3-udma: Add glue layer for non DMAengine users") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200916120955.7963-1-grygorii.strashko@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the specified/hinted sink is not reachable from a subset of the CPUs,
we could end up unable to trace the event on those CPUs. This
is the best effort we could do until we support 1:1 configurations.
Fail gracefully in such cases avoiding a WARN_ON, which can be easily
triggered by the user on certain platforms (Arm N1SDP), with the following
trace paths :
Even though we don't support using separate sinks for the ETMs yet (e.g,
for 1:1 configurations), we should at least honor the user's choice and
handle the limitations gracefully, by simply skipping the tracing on ETMs
which can't reach the requested sink.
Fixes: f9d81a657bb8 ("coresight: perf: Allow tracing on hotplugged CPUs") Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Reported-by: Jeremy Linton <jeremy.linton@arm.com> Tested-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200916191737.4001561-11-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Deadlock as below is triggered by one CPU holds drvdata->spinlock
and calls cti_enable_hw(). Smp_call_function_single() is called
in cti_enable_hw() and tries to let another CPU write CTI registers.
That CPU is trying to get drvdata->spinlock in cti_cpu_pm_notify()
and doesn't response to IPI from smp_call_function_single().
This change write CTI registers directly in cti_enable_hw().
Config->hw_powered has been checked to be true with spinlock holded.
CTI is powered and can be programmed until spinlock is released.
Moving from using an address filter to trace the default "all addresses"
range to no filtering to acheive the same result, has caused the perf
filtering of kernel/user address spaces from not working unless an
explicit address filter was used.
This is due to the original code using a side-effect of the address
filtering rather than setting the global TRCVICTLR exception level
filtering.
The use of the mode sysfs file is also similarly affected.
A helper function is added to fix both instances.
Fixes: ae2041510d5d ("coresight: etmv4: Update default filter and initialisation") Reported-by: Leo Yan <leo.yan@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200916191737.4001561-8-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Below BUG is triggered by call pm_runtime_get_sync() in
cti_cpuhp_enable_hw(). It's in CPU hotplug callback with interrupt
disabled. Pm_runtime_get_sync() calls clock driver to enable clock
which could sleep. Remove pm_runtime_get_sync() in cti_cpuhp_enable_hw()
since pm_runtime_get_sync() is called in cti_enabld and pm_runtime_put()
is called in cti_disabled. No need to increase pm count when CPU gets
online since it's not decreased when CPU is offline.
Coresight_claim_device() is called in cti_starting_cpu() only
when CTI is enabled while coresight_disclaim_device() is called
uncontionally in cti_dying_cpu(). This triggered below WARNING.
Only call disclaim device when CTI device is enabled to fix it.
etm4_count keeps track of number of ETMv4 registered and on some systems,
a race is observed on etm4_count variable which can lead to multiple calls
to cpuhp_setup_state_nocalls_cpuslocked(). This function internally calls
cpuhp_store_callbacks() which prevents multiple registrations of callbacks
for a given state and due to this race, it returns -EBUSY leading to ETM
probe failures like below.
coresight-etm4x: probe of 7040000.etm failed with error -16
This race can easily be triggered with async probe by setting probe type
as PROBE_PREFER_ASYNCHRONOUS and with ETM power management property
"arm,coresight-loses-context-with-cpu".
Prevent this race by moving cpuhp callbacks to etm driver init since the
cpuhp callbacks doesn't have to depend on the etm4_count and can be once
setup during driver init. Similarly we move cpu_pm notifier registration
to driver init and completely remove etm4_count usage. Also now we can
use non cpuslocked version of cpuhp callbacks with this movement.
Fixes: 9b6a3f3633a5 ("coresight: etmv4: Fix CPU power management setup in probe() function") Fixes: 58eb457be028 ("hwtracing/coresight-etm4x: Convert to hotplug state machine") Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com> Tested-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200916191737.4001561-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
According to its datasheet, the digital gain should be -100 dB when
CHx_DVOL is 1 and 27 dB when CHx_DVOL is 255. But with the current
dig_vol_tlv, "Digital CHx Out Volume" shows 27.5 dB if CHx_DVOL is 255
and -95.5 dB if CHx_DVOL is 1. This commit fixes this bug.
Fixes: 689c7655b50c ("ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family") Signed-off-by: Camel Guo <camelg@axis.com> Link: https://lore.kernel.org/r/20200908090417.16695-1-camel.guo@axis.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
It's agreed that the control interface has been abused since 2014, but
forcing a check should not prevent existing solutions from working.
This patch skips the checks conditionally if CONFIG_SND_CTL_VALIDATION
is set and the byte array provided by topology is > 512. This
preserves the checks for all other cases.
Fixes: 1a3232d2f61d2 ('ASoC: topology: Add support for TLV bytes controls') BugLink: https://github.com/thesofproject/linux/issues/2430 Reported-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200917103912.2565907-1-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
ima_file_hash can be called when there is no iint->ima_hash available
even though the inode exists in the integrity cache. It is fairly
common for a file to not have a hash. (e.g. an mknodat, prior to the
file being closed).
Another example where this can happen (suggested by Jann Horn):
The driver currently adds all frequencies from the hardware LUT to
the cpufreq table, regardless of whether the corresponding OPP
exists. This prevents devices from disabling certain OPPs through
the device tree and can result in CPU frequencies for which the
interconnect bandwidth can't be adjusted. Only add frequencies
with an OPP entry.
The lcdif IP does not support a framebuffer pitch (stride) other than
framebuffer width. Check for equality and reject the framebuffer
otherwise.
This prevents a distorted picture when using 640x800 and running the
Mesa graphics stack. Mesa tries to use a cache aligned stride, which
leads at that particular resolution to width != stride. Currently
Mesa has no fallback behavior, but rejecting this configuration allows
userspace to handle the issue correctly.
CONFIG_ARM_ARMADA_37XX_CPUFREQ is tristate option and therefore this
cpufreq driver can be compiled as a module. This patch adds missing
MODULE_DEVICE_TABLE which generates correct modalias for automatic
loading of this cpufreq driver when is compiled as an external module.
Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: 92ce45fb875d7 ("cpufreq: Add DVFS support for Armada 37xx")
[ Viresh: Added __maybe_unused ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 5833112df7e9 tried to make it so that a remap operation would
force the log out to disk if the filesystem is mounted with mandatory
synchronous writes. Unfortunately, that commit failed to handle the
case where the inode or the file descriptor require mandatory
synchronous writes.
Refactor the check into into a helper that will look for all three
conditions, and now we can treat reflink just like any other synchronous
write.
Fixes: 5833112df7e9 ("xfs: reflink should force the log out if mounted with wsync") Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The current implementation of stmmac_stop_all_queues() and
stmmac_start_all_queues() will not work correctly when the value of
tx_queues_to_use is changed through ethtool -L DEVNAME rx N tx M command.
Also, netif_tx_start|stop_all_queues() are only needed in driver open()
and close() only.
Fixes: c22a3f48 net: stmmac: adding multiple napi mechanism Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
netif_set_real_num_tx_queues() & netif_set_real_num_rx_queues() should be
used to inform network stack about the real Tx & Rx queue (active) number
in both stmmac_open() and stmmac_resume(), therefore, we move the code
from stmmac_dvr_probe() to stmmac_hw_setup().
Fixes: c02b7a914551 net: stmmac: use netif_set_real_num_{rx,tx}_queues Signed-off-by: Aashish Verma <aashishx.verma@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
_base_process_reply_queue() called from _base_interrupt() may schedule a
new irq poll. Fix this by calling synchronize_irq() first.
Also ensure that enable_irq() is called only when necessary to avoid
"Unbalanced enable for IRQ..." errors.
Link: https://lore.kernel.org/r/20200910142126.8147-1-thenzl@redhat.com Fixes: 320e77acb327 ("scsi: mpt3sas: Irq poll to avoid CPU hard lockups") Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In order to branch around tail calls (due to out-of-bounds index,
exceeding tail call count or missing tail call target), JIT uses
label[0] field, which contains the address of the instruction following
the tail call. When there are multiple tail calls, label[0] value comes
from handling of a previous tail call, which is incorrect.
Fix by getting rid of label array and resolving the label address
locally: for all 3 branches that jump to it, emit 0 offsets at the
beginning, and then backpatch them with the correct value.
Also, do not use the long jump infrastructure: the tail call sequence
is known to be short, so make all 3 jumps short.
projects / users / dwmw2 / linux.git / log