Yuan Can [Tue, 22 Oct 2024 09:04:53 +0000 (17:04 +0800)]
wifi: wfx: Fix error handling in wfx_core_init()
The wfx_core_init() returns without checking the retval from
sdio_register_driver().
If the sdio_register_driver() failed, the module failed to install,
leaving the wfx_spi_driver not unregistered.
Fixes: a7a91ca5a23d ("staging: wfx: add infrastructure for new driver") Signed-off-by: Yuan Can <yuancan@huawei.com> Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241022090453.84679-1-yuancan@huawei.com
Kalle Valo [Thu, 31 Oct 2024 14:03:57 +0000 (16:03 +0200)]
Merge tag 'ath-next-20241030' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
ath.git patches for v6.13
This development cycle featured phase 1 of patches to ath12k to
support the new 802.11be MLO feature, along with other ath12k feature
patches. In older drivers, support for some additional devices were
added. And there was the usual set of bug fixes and cleanups across
most drivers.
Per-driver highlights:
ath12k
* Switch to using wiphy_lock() and remove ar->conf_mutex
* Convert struct ath12k_sta::update_wk to use struct wiphy_work
* Add phase 1 of 802.11be MLO support
* Add firmware coredump collection support
* Add debugfs support for a multitude of statistics
* Fix host representation of multiple hal_rx structs
* Fix use-after-free in ath12k_dp_cc_cleanup()
* Skip Rx TID cleanup for self peer
* Fix warning and crash when unloading in a VM
* Convert CE interrupt handling from tasklet to BH workqueue
* Fix A-MSDU indication in monitor mode
ath11k
* Fix double free issue during SRNG deinit
* Enable firmware diagnostic events for WCN6750
* Fix CE offset address calculation for WCN6750 during SSR
* Fix stack frame size warning in ath11k_vif_wow_set_wakeups()
* Document the inputs for ath11k on WCN6855
Jakub Kicinski [Wed, 30 Oct 2024 01:50:57 +0000 (18:50 -0700)]
Merge tag 'wireless-next-2024-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.13
The first -next "new features" pull request for v6.13. This is a big
one as we have not been able to send one earlier. We have also some
patches affecting other subsystems: in staging we deleted the rtl8192e
driver and in debugfs added a new interface to save struct
file_operations memory; both were acked by GregKH.
Because of the lib80211/libipw move there were quite a lot of
conflicts and to solve those we decided to merge net-next into
wireless-next.
Major changes:
cfg80211/mac80211
* stop exporting wext symbols
* new mac80211 op to indicate that a new interface is to be added
* support radio separation of multi-band devices
Wireless Extensions
* move wext spy implementation to libiw
* remove iw_public_data from struct net_device
brcmfmac
* optional LPO clock support
ipw2x00
* move remaining lib80211 code into libiw
wilc1000
* WILC3000 support
rtw89
* RTL8852BE and RTL8852BE-VT BT-coexistence improvements
* tag 'wireless-next-2024-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (126 commits)
mac80211: Remove NOP call to ieee80211_hw_config
wifi: iwlwifi: work around -Wenum-compare-conditional warning
wifi: mac80211: re-order assigning channel in activate links
wifi: mac80211: convert debugfs files to short fops
debugfs: add small file operations for most files
wifi: mac80211: remove misleading j_0 construction parts
wifi: mac80211_hwsim: use hrtimer_active()
wifi: mac80211: refactor BW limitation check for CSA parsing
wifi: mac80211: filter on monitor interfaces based on configured channel
wifi: mac80211: refactor ieee80211_rx_monitor
wifi: mac80211: add support for the monitor SKIP_TX flag
wifi: cfg80211: add monitor SKIP_TX flag
wifi: mac80211: add flag to opt out of virtual monitor support
wifi: cfg80211: pass net_device to .set_monitor_channel
wifi: mac80211: remove status->ampdu_delimiter_crc
wifi: cfg80211: report per wiphy radio antenna mask
wifi: mac80211: use vif radio mask to limit creating chanctx
wifi: mac80211: use vif radio mask to limit ibss scan frequencies
wifi: cfg80211: add option for vif allowed radios
wifi: iwlwifi: allow IWL_FW_CHECK() with just a string
...
Jakub Kicinski [Tue, 29 Oct 2024 23:52:59 +0000 (16:52 -0700)]
Merge branch 'devlink-minor-cleanup'
Przemek Kitszel says:
====================
devlink: minor cleanup
(Patch 1, 2) Add one helper shortcut to put u64 values into skb.
(Patch 3, 4) Minor cleanup for error codes.
(Patch 5, 6, 7) Remove some devlink_resource_*() usage and functions
itself via replacing devlink_* variants by devl_* ones.
Przemek Kitszel [Wed, 23 Oct 2024 13:09:06 +0000 (15:09 +0200)]
devlink: remove unused devlink_resource_occ_get_register() and _unregister()
Remove not used devlink_resource_occ_get_register() and
devlink_resource_occ_get_unregister() functions; current devlink resource
users are fine with devl_ variants of the two.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/20241023131248.27192-7-przemyslaw.kitszel@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Przemek Kitszel [Wed, 23 Oct 2024 13:09:05 +0000 (15:09 +0200)]
net: dsa: replace devlink resource registration calls by devl_ variants
Replace devlink_resource_register(), devlink_resource_occ_get_register(),
and devlink_resource_occ_get_unregister() calls by respective devl_*
variants. Mentioned functions have no direct users in any drivers, and are
going to be removed in subsequent patches.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/20241023131248.27192-6-przemyslaw.kitszel@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current code is written to return -EINVAL when tailroom in the skb msg
would be exhausted precisely when it's time to nest, and return -EMSGSIZE
in all other "not enough space" conditions.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/20241023131248.27192-5-przemyslaw.kitszel@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit [Thu, 24 Oct 2024 20:42:33 +0000 (22:42 +0200)]
r8169: add support for RTL8125D
This adds support for new chip version RTL8125D, which can be found on
boards like Gigabyte X870E AORUS ELITE WIFI7. Firmware rtl8125d-1.fw
for this chip version is available in linux-firmware already.
Use a while loop in mlx5_eq_comp_int() and mlx5_eq_async_int() to
clarify the EQE polling logic. This consolidates the next_eqe_sw() calls
for the first and subequent iterations. It also avoids a goto. Turn the
num_eqes < MLX5_EQ_POLLING_BUDGET check into a break condition.
Rosen Penev [Tue, 22 Oct 2024 23:32:03 +0000 (16:32 -0700)]
amd-xgbe: use ethtool string helpers
The latter is the preferred way to copy ethtool strings.
Avoids manually incrementing the pointer.
Signed-off-by: Rosen Penev <rosenp@gmail.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241022233203.9670-1-rosenp@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Consolidate the handling of dedicated PHY and fixed-link phy by taking
advantage of logic in of_phy_get_and_connect() which handles both of
these cases, rather than open coding the same logic in ftgmac100_probe().
These two patches simplify how we attach SFP PHYs.
The first patch notices that at the two sites where we call
sfp_select_interface(), if that fails, we always print the same error.
Move this into its own function.
The second patch adds an additional level of validation, checking that
the returned interface is one that is supported by the MAC/PCS.
The last patch simplifies how SFP PHYs are attached, reducing the
number of times that we do validation in this path.
====================
Russell King (Oracle) [Wed, 23 Oct 2024 13:41:57 +0000 (14:41 +0100)]
net: phylink: simplify how SFP PHYs are attached
There are a few issues with how SFP PHYs are attached:
a) The phylink_sfp_connect_phy() and phylink_sfp_config_phy() code
validates the configuration three times:
1. To discover the support/advertising masks that the PHY/PCS/MAC
can support in order to select an interface.
2. To validate the selected interface.
3. When the PHY is brought up after being attached, another validation
is done.
This is needlessly complex.
b) The configuration is set prior to the PHY being attached, which
means we don't have the PHY available in phylink_major_config()
for phylink_pcs_neg_mode() to make decisions upon.
We have already added an extra step to validate the selected interface,
so we can now move the attachment and bringup of the PHY earlier,
inside phylink_sfp_config_phy(). This results in the validation at
step 2 above becoming entirely unnecessary, so remove that too.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1t3bcb-000c8H-3e@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Wed, 23 Oct 2024 13:41:51 +0000 (14:41 +0100)]
net: phylink: validate sfp_select_interface() returned interface
Validate that the returned interface from sfp_select_interface() is
supportable by the MAC/PCS. If it isn't, print an error and return
the NA interface type. This is a preparatory step to reorganising
how a PHY on a SFP module is handled.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1t3bcV-000c8B-Vz@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Wed, 23 Oct 2024 13:41:46 +0000 (14:41 +0100)]
net: phylink: add common validation for sfp_select_interface()
Whenever we call sfp_select_interface(), we check the returned value
and print an error. There are two cases where this happens with the
same message. Provide a common function to do this.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1t3bcQ-000c85-S4@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Tue, 22 Oct 2024 14:17:07 +0000 (15:17 +0100)]
net: phylink: simplify phylink_parse_fixedlink()
phylink_parse_fixedlink() wants to preserve the pause, asym_pause and
autoneg bits in pl->supported. Rather than reading the bits into
separate bools, zeroing pl->supported, and then setting them if they
were previously set, use a mask and linkmode_and() to achieve the same
result.
====================
mlx5e update features on config changes
This small patchset by Dragos adds a call to netdev_update_features()
in configuration changes that could impact the features status.
====================
Dragos Tatulea [Thu, 24 Oct 2024 16:41:33 +0000 (19:41 +0300)]
net/mlx5e: Update features on ring size change
When the ring size changes successfully, trigger
netdev_update_features() to enable features in wanted state if
applicable.
An example of such scenario:
$ ip link set dev eth1 up
$ ethtool --set-ring eth1 rx 8192
$ ip link set dev eth1 mtu 9000
$ ethtool --features eth1 rx-gro-hw on --> fails
$ ethtool --set-ring eth1 rx 1024
With this patch, HW GRO will be turned on automatically because
it is set in the device's wanted_features.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241024164134.299646-3-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dragos Tatulea [Thu, 24 Oct 2024 16:41:32 +0000 (19:41 +0300)]
net/mlx5e: Update features on MTU change
When the MTU changes successfully, trigger netdev_update_features() to
enable features in wanted state if applicable.
An example of such scenario:
$ ip link set dev eth1 up
$ ethtool --set-ring eth1 rx 8192
$ ip link set dev eth1 mtu 9000
$ ethtool --features eth1 rx-gro-hw on --> fails
$ ip link set dev eth1 mtu 7000
With this patch, HW GRO will be turned on automatically because
it is set in the device's wanted_features.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241024164134.299646-2-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon Horman [Wed, 23 Oct 2024 12:15:28 +0000 (13:15 +0100)]
wwan: core: Pass string literal as format argument of dev_set_name()
Both gcc-14 and clang-18 report that passing a non-string literal as the
format argument of dev_set_name() is potentially insecure.
E.g. clang-18 says:
drivers/net/wwan/wwan_core.c:442:34: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
442 | return dev_set_name(&port->dev, buf);
| ^~~
drivers/net/wwan/wwan_core.c:442:34: note: treat the string as an argument to avoid this
442 | return dev_set_name(&port->dev, buf);
| ^
| "%s",
It is always the case where the contents of mod is safe to pass as the
format argument. That is, in my understanding, it never contains any
format escape sequences.
But, it seems better to be safe than sorry. And, as a bonus, compiler
output becomes less verbose by addressing this issue as suggested by
clang-18.
Compile tested only.
No functional change intended.
====================
ipv4: Prepare core ipv4 files to future .flowi4_tos conversion.
Continue preparing users of ->flowi4_tos (struct flowi4) to the future
conversion of this field (from __u8 to dscp_t). The objective is to
have type annotation to properly separate DSCP bits from ECN ones. This
way we'll ensure that ECN doesn't interfere with DSCP and avoid
regressions where it break routing descisions (fib rules in particular).
This series concentrates on some easy IPv4 conversions where
->flowi4_tos is set directly from an IPv4 header, so we can get the
DSCP value using the ip4h_dscp() helper function.
====================
Paolo Abeni [Tue, 29 Oct 2024 14:33:24 +0000 (15:33 +0100)]
Merge branch 'ibm-emac-more-cleanups'
Rosen Penev says:
====================
ibm: emac: more cleanups
Tested on Cisco MX60W.
v2: fixed build errors. Also added extra commits to clean the driver up
further.
v3: Added tested message. Removed bad alloc_netdev_dummy commit.
v4: removed modules changes from patchset. Added fix for if MAC not
found.
v5: added of_find_matching_node commit.
v6: resend after net-next merge.
v7: removed of_find_matching_node commit. Adjusted mutex_init patch.
v8: removed patch removing custom init/exit. Needs more work.
====================
Rosen Penev [Tue, 22 Oct 2024 00:22:45 +0000 (17:22 -0700)]
net: ibm: emac: generate random MAC if not found
On this Cisco MX60W, u-boot sets the local-mac-address property.
Unfortunately by default, the MAC is wrong and is actually located on a
UBI partition. Which means nvmem needs to be used to grab it.
In the case where that fails, EMAC fails to initialize instead of
generating a random MAC as many other drivers do.
Match behavior with other drivers to have a working ethernet interface.
Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rosen Penev [Tue, 22 Oct 2024 00:22:41 +0000 (17:22 -0700)]
net: ibm: emac: use netif_receive_skb_list
Small rx improvement. Would use napi_gro_receive instead but that's a
lot more involved than netif_receive_skb_list because of how the
function is implemented.
Before:
> iperf -c 192.168.1.1
------------------------------------------------------------
Client connecting to 192.168.1.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 1] local 192.168.1.101 port 51556 connected with 192.168.1.1 port 5001
[ ID] Interval Transfer Bandwidth
[ 1] 0.00-10.04 sec 559 MBytes 467 Mbits/sec
> iperf -c 192.168.1.1
------------------------------------------------------------
Client connecting to 192.168.1.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 1] local 192.168.1.101 port 48228 connected with 192.168.1.1 port 5001
[ ID] Interval Transfer Bandwidth
[ 1] 0.00-10.03 sec 558 MBytes 467 Mbits/sec
> iperf -c 192.168.1.1
------------------------------------------------------------
Client connecting to 192.168.1.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 1] local 192.168.1.101 port 47600 connected with 192.168.1.1 port 5001
[ ID] Interval Transfer Bandwidth
[ 1] 0.00-10.04 sec 557 MBytes 466 Mbits/sec
> iperf -c 192.168.1.1
------------------------------------------------------------
Client connecting to 192.168.1.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 1] local 192.168.1.101 port 37252 connected with 192.168.1.1 port 5001
[ ID] Interval Transfer Bandwidth
[ 1] 0.00-10.05 sec 559 MBytes 467 Mbits/sec
After:
> iperf -c 192.168.1.1
------------------------------------------------------------
Client connecting to 192.168.1.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 1] local 192.168.1.101 port 40786 connected with 192.168.1.1 port 5001
[ ID] Interval Transfer Bandwidth
[ 1] 0.00-10.05 sec 572 MBytes 478 Mbits/sec
> iperf -c 192.168.1.1
------------------------------------------------------------
Client connecting to 192.168.1.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 1] local 192.168.1.101 port 52482 connected with 192.168.1.1 port 5001
[ ID] Interval Transfer Bandwidth
[ 1] 0.00-10.04 sec 571 MBytes 477 Mbits/sec
> iperf -c 192.168.1.1
------------------------------------------------------------
Client connecting to 192.168.1.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 1] local 192.168.1.101 port 48370 connected with 192.168.1.1 port 5001
[ ID] Interval Transfer Bandwidth
[ 1] 0.00-10.04 sec 572 MBytes 478 Mbits/sec
> iperf -c 192.168.1.1
------------------------------------------------------------
Client connecting to 192.168.1.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 1] local 192.168.1.101 port 46086 connected with 192.168.1.1 port 5001
[ ID] Interval Transfer Bandwidth
[ 1] 0.00-10.05 sec 571 MBytes 476 Mbits/sec
> iperf -c 192.168.1.1
------------------------------------------------------------
Client connecting to 192.168.1.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 1] local 192.168.1.101 port 46062 connected with 192.168.1.1 port 5001
[ ID] Interval Transfer Bandwidth
[ 1] 0.00-10.04 sec 572 MBytes 478 Mbits/sec
Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Kuniyuki Iwashima [Mon, 21 Oct 2024 18:32:28 +0000 (11:32 -0700)]
rtnetlink: Make per-netns RTNL dereference helpers to macro.
When CONFIG_DEBUG_NET_SMALL_RTNL is off, rtnl_net_dereference() is the
static inline wrapper of rtnl_dereference() returning a plain (void *)
pointer to make sure net is always evaluated as requested in [0].
But, it makes sparse complain [1] when the pointer has __rcu annotation:
net/ipv4/devinet.c: In function ‘inet_rtm_deladdr’:
./include/linux/rtnetlink.h:154:17: error: statement with no effect [-Werror=unused-value]
154 | (void *)net; \
net/ipv4/devinet.c:674:21: note: in expansion of macro ‘rtnl_net_dereference’
674 | (ifa = rtnl_net_dereference(net, *ifap)) != NULL;
| ^~~~~~~~~~~~~~~~~~~~
Let's go back to the original simplest macro.
Note that checkpatch complains about this approach, but it's one-shot and
less noisy than the other two.
WARNING: Argument 'net' is not used in function-like macro
#76: FILE: include/linux/rtnetlink.h:142:
+#define rtnl_net_dereference(net, p) \
+ rtnl_dereference(p)
Fixes: 844e5e7e656d ("rtnetlink: Add assertion helpers for per-netns RTNL.") Link: https://lore.kernel.org/netdev/20241004132145.7fd208e9@kernel.org/ Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202410200325.SaEJmyZS-lkp@intel.com/ [1] Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Sebastian Ott [Wed, 23 Oct 2024 13:41:46 +0000 (15:41 +0200)]
net/mlx5: unique names for per device caches
Add the device name to the per device kmem_cache names to
ensure their uniqueness. This fixes warnings like this:
"kmem_cache of name 'mlx5_fs_fgs' already exists".
Signed-off-by: Sebastian Ott <sebott@redhat.com> Reviewed-by: Breno Leitao <leitao@debian.org> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20241023134146.28448-1-sebott@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hangbin Liu [Mon, 21 Oct 2024 03:12:10 +0000 (03:12 +0000)]
bonding: return detailed error when loading native XDP fails
Bonding only supports native XDP for specific modes, which can lead to
confusion for users regarding why XDP loads successfully at times and
fails at others. This patch enhances error handling by returning detailed
error messages, providing users with clearer insights into the specific
reasons for the failure when loading native XDP.
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20241021031211.814-2-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 28 Oct 2024 22:55:48 +0000 (15:55 -0700)]
Merge branch 'mptcp-various-small-improvements'
Matthieu Baerts says:
====================
mptcp: various small improvements
The following patches are not related to each other.
- Patch 1: Avoid sending advertisements on stale subflows, reducing
risks on loosing them.
- Patch 2: Annotate data-races around subflow->fully_established, using
READ/WRITE_ONCE().
- Patch 3: A small clean-up on the PM side, avoiding a bit of duplicated
code.
- Patch 4: Use "Middlebox interference" MP_TCPRST code in reaction to a
packet received without MPTCP options in the middle of a connection.
====================
Davide Caratti [Mon, 21 Oct 2024 15:14:06 +0000 (17:14 +0200)]
mptcp: use "middlebox interference" RST when no DSS
RFC8684 suggests use of "Middlebox interference (code 0x06)" in case of
fully established subflow that carries data at TCP level with no DSS
sub-option.
This is generally the case when mpext is NULL or mpext->use_map is 0:
use a dedicated value of 'mapping_status' and use it before closing the
socket in subflow_check_data_avail().
Geliang Tang [Mon, 21 Oct 2024 15:14:05 +0000 (17:14 +0200)]
mptcp: implement mptcp_pm_connection_closed
The MPTCP path manager event handler mptcp_pm_connection_closed
interface has been added in the commit 1b1c7a0ef7f3 ("mptcp: Add path
manager interface") but it was an empty function from then on.
With such name, it sounds good to invoke mptcp_event with the
MPTCP_EVENT_CLOSED event type from it. It also removes a bit of
duplicated code.
Gang Yan [Mon, 21 Oct 2024 15:14:04 +0000 (17:14 +0200)]
mptcp: annotate data-races around subflow->fully_established
We introduce the same handling for potential data races with the
'fully_established' flag in subflow as previously done for
msk->fully_established.
Additionally, we make a crucial change: convert the subflow's
'fully_established' from 'bit_field' to 'bool' type. This is
necessary because methods for avoiding data races don't work well
with 'bit_field'. Specifically, the 'READ_ONCE' needs to know
the size of the variable being accessed, which is not supported in
'bit_field'. Also, 'test_bit' expect the address of 'bit_field'.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/516 Signed-off-by: Gang Yan <yangang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241021-net-next-mptcp-misc-6-13-v1-2-1ef02746504a@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the subflow is considered as "staled", it is better to avoid it to
send an ACK carrying an ADD_ADDR or RM_ADDR. Another subflow, if any,
will then be selected.
Florian Fainelli [Mon, 21 Oct 2024 17:49:35 +0000 (10:49 -0700)]
net: systemport: Move IO macros to header file
Move the BCM_SYSPORT_IO_MACRO() definition and its use to bcmsysport.h
where it is more appropriate and where static inline helpers are
acceptable. While at it, make sure that the macro 'offset' argument does
not trigger a checkpatch warning due to possible argument re-use.
Leo Stone [Mon, 21 Oct 2024 17:46:44 +0000 (10:46 -0700)]
selftest/tcp-ao: Add filter tests
Add tests that check if getsockopt(TCP_AO_GET_KEYS) returns the right
keys when using different filters.
Sample output:
> # ok 114 filter keys: by sndid, rcvid, address
> # ok 115 filter keys: by is_current
> # ok 116 filter keys: by is_rnext
> # ok 117 filter keys: by sndid, rcvid
> # ok 118 filter keys: correct nkeys when in.nkeys < matches
Jakub Kicinski [Wed, 16 Oct 2024 01:11:44 +0000 (18:11 -0700)]
configs/debug: make sure PROVE_RCU_LIST=y takes effect
Commit 0aaa8977acbf ("configs: introduce debug.config for CI-like setup")
added CONFIG_PROVE_RCU_LIST=y to the common CI config,
but RCU_EXPERT is not set, and it's a dependency for
CONFIG_PROVE_RCU_LIST=y. Make sure CIs take advantage
of CONFIG_PROVE_RCU_LIST=y, recent fixes in networking
indicate that it does catch bugs.
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Acked-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241016011144.3058445-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Javier Carrasco [Sat, 19 Oct 2024 20:16:49 +0000 (22:16 +0200)]
net: dsa: mv88e6xxx: fix unreleased fwnode_handle in setup_port()
'ports_fwnode' is initialized via device_get_named_child_node(), which
requires a call to fwnode_handle_put() when the variable is no longer
required to avoid leaking memory.
Add the missing fwnode_handle_put() after 'ports_fwnode' has been used
and is no longer required.
Fixes: 94a2a84f5e9e ("net: dsa: mv88e6xxx: Support LED control") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
wifi: ath12k: convert tasklet to BH workqueue for CE interrupts
Currently in Ath12k, tasklet is used to handle the BH context of CE
interrupts. However the tasklet is marked deprecated and has some
design flaws. To replace tasklets, BH workqueue support has been
added. BH workqueue behaves similarly to regular workqueues except
that the queued work items are executed in the BH context.
Hence, convert the tasklet to BH workqueue for handling CE interrupts
in the BH context.
Linus Torvalds [Thu, 24 Oct 2024 23:43:50 +0000 (16:43 -0700)]
Merge tag 'net-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfiler, xfrm and bluetooth.
Oddly this includes a fix for a posix clock regression; in our
previous PR we included a change there as a pre-requisite for
networking one. That fix proved to be buggy and requires the follow-up
included here. Thomas suggested we should send it, given we sent the
buggy patch.
Current release - regressions:
- posix-clock: Fix unbalanced locking in pc_clock_settime()
- netfilter: fix typo causing some targets not to load on IPv6
Current release - new code bugs:
- xfrm: policy: remove last remnants of pernet inexact list
Previous releases - regressions:
- core: fix races in netdev_tx_sent_queue()/dev_watchdog()
- bluetooth: fix UAF on sco_sock_timeout
- eth: hv_netvsc: fix VF namespace also in synthetic NIC
NETDEV_REGISTER event
- eth: usbnet: fix name regression
- eth: be2net: fix potential memory leak in be_xmit()
- eth: plip: fix transmit path breakage
Previous releases - always broken:
- sched: deny mismatched skip_sw/skip_hw flags for actions created by
classifiers
- netfilter: bpf: must hold reference on net namespace
- eth: virtio_net: fix integer overflow in stats
- eth: bnxt_en: replace ptp_lock with irqsave variant
- eth: octeon_ep: add SKB allocation failures handling in
__octep_oq_process_rx()
Misc:
- MAINTAINERS: add Simon as an official reviewer"
* tag 'net-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (40 commits)
net: dsa: mv88e6xxx: support 4000ps cycle counter period
net: dsa: mv88e6xxx: read cycle counter period from hardware
net: dsa: mv88e6xxx: group cycle counter coefficients
net: usb: qmi_wwan: add Fibocom FG132 0x0112 composition
hv_netvsc: Fix VF namespace also in synthetic NIC NETDEV_REGISTER event
net: dsa: microchip: disable EEE for KSZ879x/KSZ877x/KSZ876x
Bluetooth: ISO: Fix UAF on iso_sock_timeout
Bluetooth: SCO: Fix UAF on sco_sock_timeout
Bluetooth: hci_core: Disable works on hci_unregister_dev
posix-clock: posix-clock: Fix unbalanced locking in pc_clock_settime()
r8169: avoid unsolicited interrupts
net: sched: use RCU read-side critical section in taprio_dump()
net: sched: fix use-after-free in taprio_change()
net/sched: act_api: deny mismatched skip_sw/skip_hw flags for actions created by classifiers
net: usb: usbnet: fix name regression
mlxsw: spectrum_router: fix xa_store() error checking
virtio_net: fix integer overflow in stats
net: fix races in netdev_tx_sent_queue()/dev_watchdog()
net: wwan: fix global oob in wwan_rtnl_policy
netfilter: xtables: fix typo causing some targets not to load on IPv6
...
Linus Torvalds [Thu, 24 Oct 2024 23:31:58 +0000 (16:31 -0700)]
Merge tag 'hid-for-linus-20241024' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
"Device-specific functionality quirks for Thinkpad X1 Gen3, Logitech
Bolt and some Goodix touchpads (Bartłomiej Maryńczak, Hans de Goede
and Kenneth Albanowski)"
* tag 'hid-for-linus-20241024' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: lenovo: Add support for Thinkpad X1 Tablet Gen 3 keyboard
HID: multitouch: Add quirk for Logitech Bolt receiver w/ Casa touchpad
HID: i2c-hid: Delayed i2c resume wakeup for 0x0d42 Goodix touchpad
Linus Torvalds [Thu, 24 Oct 2024 21:17:34 +0000 (14:17 -0700)]
Merge tag 'loongarch-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Get correct cores_per_package for SMT systems, enable IRQ if do_ale()
triggered in irq-enabled context, and fix some bugs about vDSO, memory
managenent, hrtimer in KVM, etc"
* tag 'loongarch-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Mark hrtimer to expire in hard interrupt context
LoongArch: Make KASAN usable for variable cpu_vabits
LoongArch: Set initial pte entry with PAGE_GLOBAL for kernel space
LoongArch: Don't crash in stack_top() for tasks without vDSO
LoongArch: Set correct size for vDSO code mapping
LoongArch: Enable IRQ if do_ale() triggered in irq-enabled context
LoongArch: Get correct cores_per_package for SMT systems
LoongArch: Use "Exception return address" to comment ERA
Linus Torvalds [Thu, 24 Oct 2024 20:51:58 +0000 (13:51 -0700)]
Merge tag 'probes-fixes-v6.12-rc4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- objpool: Fix choosing allocation for percpu slots
Fixes to allocate objpool's percpu slots correctly according to the
GFP flag. It checks whether "any bit" in GFP_ATOMIC is set to choose
the vmalloc source, but it should check "all bits" in GFP_ATOMIC flag
is set, because GFP_ATOMIC is a combined flag.
If more than MAX_TRACE_ARGS are passed for creating a probe event,
the entries over MAX_TRACE_ARG in trace_arg array are not
initialized. Thus if the kernel accesses those entries, it crashes.
This rejects creating event if the number of arguments is over
MAX_TRACE_ARGS.
- tracing: Consider the NUL character when validating the event length
A strlen() is used when parsing the event name, and the original code
does not consider the terminal null byte. Thus it can pass the name
one byte longer than the buffer. This fixes to check it correctly.
* tag 'probes-fixes-v6.12-rc4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Consider the NULL character when validating the event length
tracing/probes: Fix MAX_TRACE_ARGS limit handling
objpool: fix choosing allocation for percpu slots
Linus Torvalds [Thu, 24 Oct 2024 20:04:15 +0000 (13:04 -0700)]
Merge tag 'for-6.12-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- mount option fixes:
- fix handling of compression mount options on remount
- reject rw remount in case there are options that don't work
in read-write mode (like rescue options)
- fix zone accounting of unusable space
- fix in-memory corruption when merging extent maps
- fix delalloc range locking for sector < page
- use more convenient default value of drop subtree threshold, clean
more subvolumes without the fallback to marking quotas inconsistent
- fix smatch warning about incorrect value passed to ERR_PTR
* tag 'for-6.12-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix passing 0 to ERR_PTR in btrfs_search_dir_index_item()
btrfs: reject ro->rw reconfiguration if there are hard ro requirements
btrfs: fix read corruption due to race with extent map merging
btrfs: fix the delalloc range locking if sector size < page size
btrfs: qgroup: set a more sane default value for subtree drop threshold
btrfs: clear force-compress on remount when compress mount option is given
btrfs: zoned: fix zone unusable accounting for freed reserved extent
Linus Torvalds [Thu, 24 Oct 2024 19:38:59 +0000 (12:38 -0700)]
Merge tag 'bcachefs-2024-10-22' of https://github.com/koverstreet/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Lots of hotfixes:
- transaction restart injection has been shaking out a few things
- fix a data corruption in the buffered write path on -ENOSPC, found
by xfstests generic/299
- Some small show_options fixes
- Repair mismatches in inode hash type, seed: different snapshot
versions of an inode must have the same hash/type seed, used for
directory entries and xattrs. We were checking the hash seed, but
not the type, and a user contributed a filesystem where the hash
type on one inode had somehow been flipped; these fixes allow his
filesystem to repair.
Additionally, the hash type flip made some directory entries
invisible, which were then recreated by userspace; so the hash
check code now checks for duplicate non dangling dirents, and
renames one of them if necessary.
- Don't use wait_event_interruptible() in recovery: this fixes some
filesystems failing to mount with -ERESTARTSYS
- Workaround for kvmalloc not supporting > INT_MAX allocations,
causing an -ENOMEM when allocating the sorted array of journal
keys: this allows a 75 TB filesystem to mount
- Make sure bch_inode_unpacked.bi_snapshot is set in the old inode
compat path: this alllows Marcin's filesystem (in use since before
6.7) to repair and mount"
* tag 'bcachefs-2024-10-22' of https://github.com/koverstreet/bcachefs: (26 commits)
bcachefs: Set bch_inode_unpacked.bi_snapshot in old inode path
bcachefs: Mark more errors as AUTOFIX
bcachefs: Workaround for kvmalloc() not supporting > INT_MAX allocations
bcachefs: Don't use wait_event_interruptible() in recovery
bcachefs: Fix __bch2_fsck_err() warning
bcachefs: fsck: Improve hash_check_key()
bcachefs: bch2_hash_set_or_get_in_snapshot()
bcachefs: Repair mismatches in inode hash seed, type
bcachefs: Add hash seed, type to inode_to_text()
bcachefs: INODE_STR_HASH() for bch_inode_unpacked
bcachefs: Run in-kernel offline fsck without ratelimit errors
bcachefs: skip mount option handle for empty string.
bcachefs: fix incorrect show_options results
bcachefs: Fix data corruption on -ENOSPC in buffered write path
bcachefs: bch2_folio_reservation_get_partial() is now better behaved
bcachefs: fix disk reservation accounting in bch2_folio_reservation_get()
bcachefS: ec: fix data type on stripe deletion
bcachefs: Don't use commit_do() unnecessarily
bcachefs: handle restarts in bch2_bucket_io_time_reset()
bcachefs: fix restart handling in __bch2_resume_logged_op_finsert()
...
====================
phonet: Convert all doit() and dumpit() to RCU.
addr_doit() and route_doit() access only phonet_device_list(dev_net(dev))
and phonet_pernet(dev_net(dev))->routes, respectively.
Each per-netns struct has its dedicated mutex, and RTNL also protects
the structs. __dev_change_net_namespace() has synchronize_net(), so
we have two options to convert addr_doit() and route_doit().
1. Use per-netns RTNL
2. Use RCU and convert each struct mutex to spinlock_t
As RCU is preferable, this series converts all PF_PHONET's doit()
and dumpit() to RCU.
4 doit()s and 1 dumpit() are now converted to RCU, 70 doit()s and
28 dumpit()s are still under RTNL.
====================
Kuniyuki Iwashima [Thu, 17 Oct 2024 18:31:36 +0000 (11:31 -0700)]
phonet: Don't hold RTNL for getaddr_dumpit().
getaddr_dumpit() already relies on RCU and does not need RTNL.
Let's use READ_ONCE() for ifindex and register getaddr_dumpit()
with RTNL_FLAG_DUMP_UNLOCKED.
While at it, the retval of getaddr_dumpit() is changed to combine
NLMSG_DONE and save recvmsg() as done in 58a4ff5d77b1 ("phonet: no
longer hold RTNL in route_dumpit()").
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
projects / users / jedix / linux-maple.git / log