Dave Airlie [Fri, 30 Apr 2021 00:13:08 +0000 (10:13 +1000)]
Merge tag 'drm-misc-next-fixes-2021-04-29' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Two patches in drm-misc-next-fixes this week, one to fix the error
handling in TTM when a BO can't be swapped out and one to prevent a
wrong dereference in efifb.
Dave Airlie [Thu, 29 Apr 2021 23:56:31 +0000 (09:56 +1000)]
Merge tag 'drm/tegra/for-5.13-rc1' of ssh://git.freedesktop.org/git/tegra/linux into drm-next
drm/tegra: Changes for v5.13-rc1
The changes this time around contain a couple of fixes for host1x along
with some improvements for Tegra DRM. Most notably the Tegra DRM driver
now supports the hardware cursor on Tegra186 and later, more correctly
reflects the capabilities of the display pipelines on various Tegra SoC
generations and knows how to deal with the dGPU sector layout by using
framebuffer modifiers.
drm/i915: Fix docbook descriptions for i915_gem_shrinker
Fixes the following htmldocs warning:
drivers/gpu/drm/i915/gem/i915_gem_shrinker.c:102: warning: Function parameter or member 'ww' not described in 'i915_gem_shrink'
Ville Syrjälä [Mon, 12 Apr 2021 05:46:05 +0000 (08:46 +0300)]
drm/i915: Disable LTTPR detection on GLK once again
The glk display version change is causing us to again attempt
LTTPR detection on glk. We must not do tha since glk doesn't
have a long enough AUX timeout. Restore the correct logic to
skip the detection.
Ville Syrjälä [Mon, 12 Apr 2021 05:46:03 +0000 (08:46 +0300)]
drm/i915: Restore lost glk FBC 16bpp w/a
We lost the FBC 16bpp 512byte stride requirement on glk when
we switched from display version 9 to 10. Restore the w/a to
avoid enabling FBC with a bad stride and thus display garbage.
Tvrtko Ursulin [Fri, 26 Mar 2021 10:57:59 +0000 (10:57 +0000)]
drm/i915: Take request reference before arming the watchdog timer
Reference needs to be taken before arming the timer. Luckily, given the
default timer period of 20s, the potential to hit the race is extremely
unlikely.
Dave Airlie [Fri, 23 Apr 2021 02:56:21 +0000 (12:56 +1000)]
Merge tag 'drm-misc-next-fixes-2021-04-22' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
A few fixes for the next merge window, with some build fixes for anx7625
and lt8912b bridges, incorrect error handling for lt8912b and TTM, and
one fix for TTM page limit accounting.
Jinzhou Su [Tue, 20 Apr 2021 08:17:14 +0000 (16:17 +0800)]
drm/amdgpu: Add mem sync flag for IB allocated by SA
The buffer of SA bo will be used by many cases. So it's better
to invalidate the cache of indirect buffer allocated by SA before
commit the IB.
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mukul Joshi [Wed, 24 Mar 2021 15:51:35 +0000 (11:51 -0400)]
drm/amdgpu: Fix SDMA RAS error reporting on Aldebaran
Fix the following issues with SDMA RAS error reporting:
1. Read the EDC_COUNTER2 register also to fetch error counts
for all sub-blocks in SDMA.
2. SDMA RAS on Aldebaran suports single-bit uncorrectable errors
only. So, report error count in UE count instead of CE count.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-By: John Clements <John.Clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Report Proper Quantization Range in AVI Infoframe
[Why?]
When a monitor does not set both QS and QY bits, DC does not
set Q0, Q1, QY0 and QY1 bits in AVI infoframe. Setting RGB bits
should be separate from setting YCC bits.
[How?]
Separate logic for setting RGB and YCC quantization range bits
in the AVI infoframe.
Signed-off-by: Dillon Varone <dillon.varone@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Galiffi [Thu, 8 Apr 2021 03:30:23 +0000 (23:30 -0400)]
drm/amd/display: Fixed typo in function name.
[How & Why]
Changed "prsent" to "present".
Signed-off-by: David Galiffi <David.Galiffi@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Thu, 8 Apr 2021 16:21:47 +0000 (12:21 -0400)]
drm/amd/display: Always poll for rxstatus in authenticate
[Why]
Requirement from the spec - we shouldn't be potentially exiting out
early based on encryption status.
[How]
Drop the calls from HDCP1 and HDCP2 execution that exit out early
based on link encryption status.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michael Strauss [Tue, 6 Apr 2021 16:20:51 +0000 (12:20 -0400)]
drm/amd/display: Add link rate optimization logs for ILR
[Why&How]
Add logs to verify ILR optimization behaviour on boot
Signed-off-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Unconditionally clear training pattern set after lt
[WHY]
While Link Training is being performed,
and the LTTPRs are in Non-LTTPR or LTTPR Transparent mode,
any DPCD registers besides those used for Link Training are not to be
accessed.
The spec defines the link training registers as DP_TRAINING_PATTERN_SET
(102h) to DP_TRAINING_LANE3_SET (106h), and DP_LANE0_1_STATUS (202h)
to DP_ADJUST_REQUEST_LANE2_3 (207h).
[HOW]
Move the current write to DPCD Address DP_LINK_TRAINING_PATTERN_SET out
of its conditional block.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hugo Hu [Wed, 20 Jan 2021 07:54:11 +0000 (15:54 +0800)]
drm/amd/display: treat memory as a single-channel for asymmetric memory v2
Previous change had been reverted since it caused hang.
Remake change to avoid defect.
[Why]
1. Driver use umachannelnumber to calculate watermarks for stutter.
In asymmetric memory config, the actual bandwidth is less than
dual-channel. The bandwidth should be the same as single-channel.
2. We found single rank dimm need additional delay time for stutter.
[How]
Get information from each DIMM. Treat memory config as a single-channel
for asymmetric memory in bandwidth calculating.
Add additional delay time for single rank dimm.
Fixes: b8720ed0b87d32 ("drm/amd/display: System black screen hangs on driver load") Signed-off-by: Hugo Hu <hugo.hu@amd.com> Reviewed-by: Sung Lee <Sung.Lee@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Robin Singh [Mon, 5 Apr 2021 15:27:24 +0000 (11:27 -0400)]
drm/amd/display: removed unused function dc_link_reallocate_mst_payload.
[Why]
Found that dc_link_reallocate_mst_payload is not used anymore
in any of the use case scenario.
[How]
removed dc_link_reallocate_mst_payload function definition
and declaration.
Signed-off-by: Robin Singh <robin.singh@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Wang [Mon, 5 Apr 2021 21:25:25 +0000 (17:25 -0400)]
drm/amd/display: disable seamless boot for external DP
[Why]
Primary feature use case is with eDP panels.
[How]
Fail seamless boot validation if display is not an eDP panel.
Signed-off-by: Anthony Wang <anthony1.wang@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: add handling for hdcp2 rx id list validation
[why]
the current implementation of hdcp2 rx id list validation does not
have handler/checker for invalid message status, e.g. HMAC, the V
parameter calculated from PSP not matching the V prime from Rx.
[how]
return a generic FAILURE for any message status not SUCCESS or
REVOKED.
Anthony Wang [Mon, 5 Apr 2021 21:13:58 +0000 (17:13 -0400)]
drm/amd/display: Add DSC check to seamless boot validation
[Why & How]
We want to immediately fail seamless boot validation if DSC is active,
as VBIOS currently does not support DSC timings. Add a check for
the relevant flag in dc_validate_seamless_boot_timing.
Signed-off-by: Anthony Wang <anthony1.wang@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Robin Singh [Tue, 15 Dec 2020 00:14:48 +0000 (19:14 -0500)]
drm/amd/display: fixed divide by zero kernel crash during dsc enablement
[why]
During dsc enable, a divide by zero condition triggered the
kernel crash.
[how]
An IGT test, which enable the DSC, was crashing at the time of
restore the default dsc status, becaue of h_totals value
becoming 0. So add a check before divide condition. If h_total
is zero, gracefully ignore and set the default value.
Signed-off-by: Robin Singh <robin.singh@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Reviewed-by: Robin Singh <Robin.Singh@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dennis Li [Fri, 16 Apr 2021 14:41:11 +0000 (22:41 +0800)]
drm/amdgpu: fix a error injection failed issue
because "sscanf(str, "retire_page")" always return 0, if application use
the raw data for error injection, it always wrongly falls into "op ==
3". Change to use strstr instead.
Signed-off-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: only harvest gcea/mmea error status in aldebaran
In aldebaran, driver only needs to harvest SDP
RdRspStatus, WrRspStatus and first parity error
on RdRsp data. Check error type before harvest
error information.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Stanley Yang <Stanley.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: only harvest gcea/mmea error status in arcturus
SDP RdRspStatus/WrRspStatus or first parity error on
RdRsp data can cause system fatal error in arcturus.
GPU will be freezed in such case.
Driver needs to harvest these error information before
reset the GPU. Check error type to avoid harvest normal
gcea/mmea information.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Stanley Yang <Stanley.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When gfx wdt was configured to fatal_disable, the
timeout period should be configured to 0x0 (timeout
disabled)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dennis Li [Wed, 14 Apr 2021 11:00:34 +0000 (19:00 +0800)]
drm/amdkfd: add edc error interrupt handle for poison propogate mode
In poison progogate mode, when driver receive the edc error interrupt
from SQ, driver should kill the process by pasid which is using the
poison data, and then trigger GPU reset.
Signed-off-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dan Carpenter [Wed, 14 Apr 2021 05:59:22 +0000 (08:59 +0300)]
drm/amd/pm: fix error code in smu_set_power_limit()
We should return -EINVAL instead of success if the "limit" is too high.
Fixes: e098bc9612c2 ("drm/amd/pm: optimize the power related source code layout") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dan Carpenter [Wed, 14 Apr 2021 05:58:55 +0000 (08:58 +0300)]
drm/amdgpu: fix an error code in init_pmu_entry_by_type_and_add()
If the kmemdup() fails then this should return a negative error code
but it currently returns success
Fixes: b4a7db71ea06 ("drm/amdgpu: add per device user friendly xgmi events for vega20") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Accept non-linear buffers which use a multi-planar format, as long
as they don't use DCC.
Tested on GFX9 with NV12.
Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu/dm: Fix NULL pointer crash during DP MST hotplug
This patch checks the return value of the function
dc_link_add_remote_sink before using it. This was causing
a crash during consecutive hotplugs of DP MST displays.
Cc: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Shashank Sharma <shashank.sharma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current list supports modifiers that have DCC_MAX_COMPRESSED_BLOCK
set to AMD_FMT_MOD_DCC_BLOCK_128B, while AMD_FMT_MOD_DCC_BLOCK_64B
is used instead by userspace.
[How]
Replace AMD_FMT_MOD_DCC_BLOCK_128B with AMD_FMT_MOD_DCC_BLOCK_64B
for modifiers with DCC supported.
Fixes: faa37f54ce0462 ("drm/amd/display: Expose modifiers") Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Xiaojian Du [Wed, 14 Apr 2021 06:55:27 +0000 (14:55 +0800)]
drm/amd/pm: revise two names of sensor values for vangogh
This patch is to revise two names of sensor values for vangogh.
New smu metrics table is supported by new pmfw
(from version 4.63.36.00 ), it includes two parts, one part is
the current smu metrics table data and the other part is the
average smu metrics table data. The hwmon will read the current gfxclk
and mclk from the current smu metrics table data.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Xiaojian Du [Tue, 13 Apr 2021 07:52:17 +0000 (15:52 +0800)]
drm/amd/pm: remove the "set" function of pp_dpm_mclk for vangogh
This patch is to remove the "set" function of pp_dpm_mclk for vangogh.
For vangogh, mclk bonds with fclk, they will lock each other
on the same perfomance level. But according to the smu message from pmfw,
only fclk is allowed to set value manually, so remove the unnecessary
code of "set" function for mclk.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Joseph Greathouse [Thu, 15 Apr 2021 06:02:46 +0000 (14:02 +0800)]
drm/amdgpu: Copy MEC FW version to MEC2 if we skipped loading MEC2
If we skipped loading MEC2 firmware separately
from MEC, then MEC2 will be running the same
firmware image. Copy the MEC version and feature
numbers into MEC2 version and feature numbers.
This is needed for things like GWS support, where
we rely on knowing what version of firmware is
running on MEC2. Leaving these MEC2 entries blank
breaks our ability to version-check enables and
workarounds.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Wed, 7 Apr 2021 21:30:05 +0000 (17:30 -0400)]
drm/amdkfd: Remove legacy code not acquiring VMs
ROCm user mode has acquired VMs from DRM file descriptors for as long
as it supported the upstream KFD. Legacy code to support older versions
of ROCm is not needed any more.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Use iterator methods exposed by amdgpu_res_cursor.h in building SG_TABLE's for a VRAM BO
Extend current implementation of SG_TABLE construction method to
allow exportation of sub-buffers of a VRAM BO. This capability will
enable logical partitioning of a VRAM BO into multiple non-overlapping
sub-buffers. One example of this use case is to partition a VRAM BO
into two sub-buffers, one for SRC and another for DST.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add back the double-sscanf so that both decimal
and hexadecimal values could be read in, but this
time invert the scan so that hexadecimal format
with a leading 0x is tried first, and if that
fails, then try decimal format.
Also use a logical-AND instead of nesting double
if-conditional.
See commit "drm/amdgpu: Fix a bug for input with double sscanf"
Cc: Alexander Deucher <Alexander.Deucher@amd.com> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add bad_page_cnt_threshold to debugfs, an optional
file system used for debugging, for reporting
purposes only--it usually matches the size of
EEPROM but may be different depending on the
"bad_page_threshold" kernel module option.
The "bad_page_cnt_threshold" is a dynamically
computed value. It depends on three things: the
VRAM size; the size of the EEPROM (or the size
allocated to the RAS table therein); and the
"bad_page_threshold" module parameter. It is a
dynamically computed value, when the amdgpu module
is run, on which further parameters and logic
depend, and as such it is helpful to see the
dynamically computed value in debugfs.
Cc: Alexander Deucher <Alexander.Deucher@amd.com> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Fix a bug in checking the result of reserve page
Fix if (ret) --> if (!ret), a bug, for
"retire_page", which caused the kernel to recall
the method with *pos == end of file, and that
bounced back with error. On the first run, we
advanced *pos, but returned 0 back to fs layer,
also a bug.
Fix the logic of the check of the result of
amdgpu_reserve_page_direct()--it is 0 on success,
and non-zero on error, not the other way
around. This patch fixes this bug.
Cc: Alexander Deucher <Alexander.Deucher@amd.com> Cc: John Clements <john.clements@amd.com> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Fix a bug for input with double sscanf
Remove double-sscanf to scan for %llu and 0x%llx,
as that is not going to work!
The %llu will consume the "0" in "0x" of your
input, and the hex value you think you're entering
will always be 0. That is, a valid hex value can
never be consumed.
On the other hand, just entering a hex number
without leading 0x will either be scanned as a
string and not match, for instance FAB123, or
the leading decimal portion is scanned as the
%llu, for instance 123FAB will be scanned as 123,
which is not correct.
Thus remove the first %llu scan and leave only the
%llx scan, removing the leading 0x since %llx can
scan either.
Addresses are usually always hex values, so this
suffices.
Cc: Alexander Deucher <Alexander.Deucher@amd.com> Cc: Xinhui Pan <xinhui.pan@amd.com> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jinzhou Su [Mon, 12 Apr 2021 07:45:31 +0000 (15:45 +0800)]
drm/amdgpu: Add graphics cache rinse packet for sdma
Add emit mem sync callback for sdma_v5_2
In amdgpu sync object test, three threads created jobs
to send GFX IB and SDMA IB in sequence. After the first
GFX thread joined, sometimes the third thread will reuse
the same physical page to store the SDMA IB. There will
be a risk that SDMA will read GFX IB in the previous physical
page. So it's better to flush the cache before commit sdma IB.
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kent Russell [Mon, 12 Apr 2021 12:45:58 +0000 (08:45 -0400)]
drm/amdgpu: Ensure dcefclk isn't created on Aldebaran
Like Arcturus, this isn't available on Aldebaran, so remove it
accordingly
Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC version 3.2.131 brings improvements in multiple areas.
In summary, we highlight:
-Enhancement for multiple eDP BL control.
-Add debug flag to enable eDP ILR by default and debugfs to repress HPD/HPR_RX IRQ.
-Fixes for DSC enable sequence,Force vsync flip,hang when psr is enabled etc.
-Firmware releases:
0.0.60
0.0.61
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Wed, 31 Mar 2021 20:50:44 +0000 (16:50 -0400)]
drm/amd/display: Fix hangs with psr enabled on dcn3.xx
[Why]
SKIP_CRTC_DISABLE bit should be applicable to all dcn asics
not only Raven.
[How]
Replace check for Raven only with check for all DCNs.
Signed-off-by: Roman Li <Roman.Li@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Xiaojian Du [Fri, 9 Apr 2021 08:19:43 +0000 (16:19 +0800)]
drm/amd/pm: add support for new smu metrics table for vangogh
This patch is to add support for new smu metrics table for vangogh.
It will support new and legacy smu metrics table in the meanwhile.
New pmfw version is 4.63.36.00, and new smu interface version is #3.
v1: check smu pmfw version to determine to use new or legacy smu metrics
table
v2: check smu interface version to determine to use new or legacy smu
metrics table
v3: revise wrong symbol
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Xiaojian Du [Thu, 25 Mar 2021 08:33:27 +0000 (16:33 +0800)]
drm/amd/pm: update the driver interface header for vangogh
This patch is to update the driver interface header for vangogh.
New version driver interface header will support new version pmfw
(from version 4.63.36.00) which uses new smu metrics table.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lewis Huang [Fri, 26 Mar 2021 08:12:45 +0000 (16:12 +0800)]
drm/amd/display: wait vblank when stream enabled and update dpp clock
[Why]
When boot into OS, seamless boot device won't blank stream.
Driver update dpp clock when scanline position in vactive will show
garbage on screen.
[How]
Wait for vblank for seamless boot edp display when driver update dpp clock.
The apply seamless boot flag will be clear when OS call SetVisibility on.
Therefore we only wait for vblank once after boot into OS.
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mikita Lipski [Tue, 27 Oct 2020 19:52:43 +0000 (15:52 -0400)]
drm/amd/display: Remove unused flag from stream state
[why & how]
Removing unused DSC flag which is incorrect and is not used.
We are only using stream->timing.flags.DSC for DSC's current
state. Stream state as an input parameter and should not contain
any past status flags.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Wang [Wed, 31 Mar 2021 15:03:35 +0000 (11:03 -0400)]
drm/amd/display: Force vsync flip when reconfiguring MPCC
[Why]
Underflow observed when disabling PIP overlay in-game when
vsync is disabled, due to OTC master lock not working with
game pipe which is immediate flip.
[How]
When performing a full update, override flip_immediate value
to false for all planes, so that flip occurs on vsync.
Signed-off-by: Anthony Wang <anthony1.wang@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michael Strauss [Tue, 9 Mar 2021 19:35:05 +0000 (14:35 -0500)]
drm/amd/display: Disable boot optimizations if ILR optimzation is required
[Why]
VBIOS currently sets the max link rate found in eDP 1.4 SUPPORTED_LINK_RATES table
If eDP fastboot optimizations are enabled, the link rate remains at max after init
[How]
Determine optimal link rate during boot, disable seamless boot
and eDP fastboot optimizations if link rate optimization is required
Signed-off-by: Michael Strauss <michael.strauss@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Thu, 1 Apr 2021 19:36:41 +0000 (14:36 -0500)]
drm/amdgpu: Calling address translation functions to simplify codes
Use amdgpu_gmc_vram_pa and amdgpu_gmc_vram_cpu_pa
to simplify codes. No logic change.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Thu, 1 Apr 2021 19:36:40 +0000 (14:36 -0500)]
drm/amdgpu: Introduce functions for vram physical addr calculation
Add one function to calculate BO's GPU physical address.
And another function to calculate BO's CPU physical address.
v2: Use functions vs macros (Christian)
Use more proper function names (Christian)
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Suggested-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / nvme.git / log