Currently we have a btrfs_debug() for run_one_delayed_ref() failure, but
if end users hit such problem, there will be no chance that
btrfs_debug() is enabled. This can lead to very little useful info for
debugging.
This patch will:
- Add extra info for error reporting
Including:
* logical bytenr
* num_bytes
* type
* action
* ref_mod
- Replace the btrfs_debug() with btrfs_err()
- Move the error reporting into run_one_delayed_ref()
This is to avoid use-after-free, the @node can be freed in the caller.
This error should only be triggered at most once.
As if run_one_delayed_ref() failed, we trigger the error message, then
causing the call chain to error out:
And we will abort the current transaction in btrfs_run_delayed_refs().
If we have to run delayed refs for the abort transaction,
run_one_delayed_ref() will just cleanup the refs and do nothing, thus no
new error messages would be output.
This cmsg_so_mark.sh test will hang on non-amd64 systems because of the
infinity loop for argument parsing in cmsg_sender.
Variable "o" in cs_parse_args() for taking getopt() should be an int,
otherwise it will be 255 when getopt() returns -1 on non-amd64 system
and thus causing infinity loop.
Since gcc13, each member of an enum has the same type as the enum [1]. And
that is inherited from its members. Provided these two:
SRP_TAG_NO_REQ = ~0U,
SRP_TAG_TSK_MGMT = 1U << 31
all other members are unsigned ints.
Esp. with SRP_MAX_SGE and SRP_TSK_MGMT_SQ_SIZE and their use in min(),
this results in the following warnings:
include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast
drivers/infiniband/ulp/srp/ib_srp.c:563:42: note: in expansion of macro 'min'
include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast
drivers/infiniband/ulp/srp/ib_srp.c:2369:27: note: in expansion of macro 'min'
So move the large values away to a separate enum, so that they don't
affect other members.
Fix the system crash that happens when a task iterator travel through
vma of tasks.
In task iterators, we used to access mm by following the pointer on
the task_struct; however, the death of a task will clear the pointer,
even though we still hold the task_struct. That can cause an
unexpected crash for a null pointer when an iterator is visiting a
task that dies during the visit. Keeping a reference of mm on the
iterator ensures we always have a valid pointer to mm.
Co-developed-by: Song Liu <song@kernel.org> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Kui-Feng Lee <kuifeng@meta.com> Reported-by: Nathan Slingerland <slinger@meta.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/r/20221216221855.4122288-2-kuifeng@meta.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When close device, if wol is enabled, rx will be enabled. When open
device it will cause rx packet to be dma to the wrong memory address
after pci_set_master() and system log will show blow messages.
DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Write] Request device [02:00.0] PASID ffffffff fault addr ffdd4000 [fault reason 05] PTE Write access is not set
In this patch, driver disable tx/rx when close device. If wol is
enabled, only enable rx filter and disable rxdv_gate(if support) to
let hardware only receive packet to fifo but not to dma it.
Signed-off-by: Chunhao Lin <hau@realtek.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is no functional change. Moving these two functions for following
patch "r8169: fix dmar pte write access is not set error".
Signed-off-by: Chunhao Lin <hau@realtek.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
It's not very useful to copy back an empty ethtool_stats struct and
return 0 if we didn't actually have any stats. This also allows for
further simplification of this function in the future commits.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the receive_filter(), should not drop the packet with the
broadcast/multicast address. Add the check for this
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20221214054306.24145-1-lulu@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add a limit to 'config->vq_num' which is user controlled data which
comes from an vduse_ioctl to prevent large memory allocations.
Micheal says - This limit is somewhat arbitrary.
However, currently virtio pci and ccw are limited to a 16 bit vq number.
While MMIO isn't it is also isn't used with lots of VQs due to
current lack of support for per-vq interrupts.
Thus, the 0xffff limit on number of VQs corresponding
to a 16-bit VQ number seems sufficient for now.
This is found using static analysis with smatch.
Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Message-Id: <20221128155717.2579992-1-harshit.m.mogalapalli@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Virtio_crypto use max_data_queues+1 to setup vqs,
we use vp_modern_get_num_queues to protect the vq range in setup_vq.
We could enter index >= vp_modern_get_num_queues(mdev) in setup_vq
if common->num_queues is not set well,and it return -ENOENT.
It is better to use -EINVAL instead.
Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com>
Message-Id: <20221101111655.1947-1-angus.chen@jaguarmicro.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When qemu uses different address spaces for data and control virtqueues,
the current code would overwrite the control virtqueue iotlb through the
dup_iotlb call. Fix this by referring to the address space identifier
and the group to asid mapping to determine which mapping needs to be
updated. We also move the address space logic from mlx5 net to core
directory.
Reported-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20221114131759.57883-6-elic@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
event_handler runs under atomic context and may not acquire reslock. We
can still guarantee that the handler won't be called after suspend by
clearing nb_registered, unregistering the handler and flushing the
workqueue.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20221114131759.57883-5-elic@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Check if VIRTIO_NET_F_CTRL_VLAN is negotiated and return error if
control VQ command is received.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20221114131759.57883-3-elic@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The virtio_device vqs_list spinlocks must be initialized before use to
prevent functions that manipulate the device virtualqueues, such as
vring_new_virtqueue(), from blocking indefinitely.
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Message-Id: <20221012062949.1526176-1-ricardo.canuelo@collabora.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Verify that nullness information is not porpagated in the branches
of register to register JEQ and JNE operations if one of them is
PTR_TO_BTF_ID. Implement this in C level so we can use CO-RE.
Signed-off-by: Hao Sun <sunhao.th@gmail.com> Suggested-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/r/20221222024414.29539-2-sunhao.th@gmail.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When there is a single DS no striping constraints need to be placed on
the IO. When such constraint is applied then buffered reads don't
coalesce to the DS's rsize.
The init order and resulting error handling in dma_buf_export
was pretty messy.
Subordinate objects like the file and the sysfs kernel objects
were initializing and wiring itself up with the object in the
wrong order resulting not only in complicating and partially
incorrect error handling, but also in publishing only halve
initialized DMA-buf objects.
Clean this up thoughtfully by allocating the file independent
of the DMA-buf object. Then allocate and initialize the DMA-buf
object itself, before publishing it through sysfs. If everything
works as expected the file is then connected with the DMA-buf
object and publish it through debugfs.
Also adds the missing dma_resv_fini() into the error handling.
v2: add some missing changes to dma_bug_getfile() and a missing NULL
check in dma_buf_file_release()
Some laptops have been reported to wake up from s2idle when plugging
in the AC adapter or by closing the lid. This is a surprising
behavior that is further clarified by commit cb3e7d624c3ff ("PM:
wakeup: Add extra debugging statement for multiple active IRQs").
With that commit in place the following interaction can be seen
when the lid is closed:
[ 28.946038] PM: suspend-to-idle
[ 28.946083] ACPI: EC: ACPI EC GPE status set
[ 28.946101] ACPI: PM: Rearming ACPI SCI for wakeup
[ 28.950152] Timekeeping suspended for 3.320 seconds
[ 28.950152] PM: Triggering wakeup from IRQ 9
[ 28.950152] ACPI: EC: ACPI EC GPE status set
[ 28.950152] ACPI: EC: ACPI EC GPE dispatched
[ 28.995057] ACPI: EC: ACPI EC work flushed
[ 28.995075] ACPI: PM: Rearming ACPI SCI for wakeup
[ 28.995131] PM: Triggering wakeup from IRQ 9
[ 28.995271] ACPI: EC: ACPI EC GPE status set
[ 28.995291] ACPI: EC: ACPI EC GPE dispatched
[ 29.098556] ACPI: EC: ACPI EC work flushed
[ 29.207020] ACPI: EC: ACPI EC work flushed
[ 29.207037] ACPI: PM: Rearming ACPI SCI for wakeup
[ 29.211095] Timekeeping suspended for 0.739 seconds
[ 29.211095] PM: Triggering wakeup from IRQ 9
[ 29.211079] PM: Triggering wakeup from IRQ 7
[ 29.211095] ACPI: PM: ACPI non-EC GPE wakeup
[ 29.211095] PM: resume from suspend-to-idle
* IRQ9 on this laptop is used for the ACPI SCI.
* IRQ7 on this laptop is used for the GPIO controller.
What has occurred is when the lid was closed the EC woke up the
SoC from it's deepest sleep state and the kernel's s2idle loop
processed all EC events. When it was finished processing EC events,
it checked for any other reasons to wake (break the s2idle loop).
The IRQ for the GPIO controller was active so the loop broke, and
then this IRQ was processed. This is not a kernel bug but it is
certainly a surprising behavior, and to better debug it we should
have a dynamic debugging message that we can enact to catch it.
This patch results in some qemu test failures, specifically xilinx-zynq-a9
machine and zynq-zc702 as well as zynq-zed devicetree files, when trying
to boot from USB drive.
This can't happen right now, but in preparation for allowing
bio_split_to_limits() returning NULL if it ended the bio, check for it
in all the callers.
We have two types of task_work based creation, one is using an existing
worker to setup a new one (eg when going to sleep and we have no free
workers), and the other is allocating a new worker. Only the latter
should be freed when we cancel task_work creation for a new worker.
Fixes: af82425c6a2d ("io_uring/io-wq: free worker if task_work creation is canceled") Reported-by: syzbot+d56ec896af3637bdb7e4@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When booting with CONFIG_CFI_CLANG, there are numerous violations when
accessing the files under
/sys/devices/pci0000:00/0000:00:02.0/drm/card0/gt/gt0:
$ cd /sys/devices/pci0000:00/0000:00:02.0/drm/card0/gt/gt0
With kCFI, indirect calls are validated against their expected type
versus actual type and failures occur when the two types do not match.
The ultimate issue is that these sysfs functions are expecting to be
called via dev_attr_show() but they may also be called via
kobj_attr_show(), as certain files are created under two different
kobjects that have two different sysfs_ops in intel_gt_sysfs_register(),
hence the warnings above. When accessing the gt_ files under
/sys/devices/pci0000:00/0000:00:02.0/drm/card0, which are using the same
sysfs functions, there are no violations, meaning the functions are
being called with the proper type.
To make everything work properly, adjust certain functions to match the
type of the ->show() and ->store() members in 'struct kobj_attribute'.
Add a macro to generate functions for that can be called via both
dev_attr_{show,store}() or kobj_attr_{show,store}() so that they can be
called through both kobject locations without violating kCFI and adjust
the attribute groups to account for this.
If we have multiple requests waiting on the same target poll waitqueue,
then it's quite possible to get a request triggered and get disappointed
in not being able to make any progress with it. If we race in doing so,
we'll potentially leave the poll request on the internal tables, but
removed from the waitqueue. That means that any subsequent trigger of
the poll waitqueue will not kick that request into action, causing an
application to potentially wait for completion of a request that will
never happen.
Fix this by adding a new poll return state, IOU_POLL_REISSUE. Rather
than have complicated logic for how to re-arm a given type of request,
just punt it for a reissue.
While in there, move the 'ret' variable to the only section where it
gets used. This avoids confusion the scope of it.
There is no real problem for normal IOPOLL as flush is also called with
uring_lock taken, but it's getting more complicated for IOPOLL|SQPOLL,
for which __io_cqring_overflow_flush() happens from the CQ waiting path.
pci_get_domain_bus_and_slot() takes reference, the caller should release
the reference by calling pci_dev_put() after use. Call pci_dev_put() in
the error path to fix this.
Fixes: 3d7d407dfb05 ("platform/x86: amd-pmc: Add support for AMD Spill to DRAM STB feature") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20221229072534.1381432-1-linmq006@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Although rare, ssam_request_sync_init() can fail. In that case, the
request should be freed via ssam_request_sync_free(). Currently it is
leaked instead. Fix this.
Fixes: c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem") Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20221220175608.1436273-1-luzmaximilian@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Before the commit under Fixes the page would have been released
from the pool before the napi_alloc_skb() call, so normal page
freeing was fine (released page == no longer in the pool).
After the change we just mark the page for recycling so it's still
in the pool if the skb alloc fails, we need to recycle.
Same commit added the same bug in the new bnxt_rx_multi_page_skb().
Fixes: 1dc4c557bfed ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff") Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Link: https://lore.kernel.org/r/20230111042547.987749-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, it used old rss size to get current tc mode. As a result, the
rss size is updated, but the tc mode is still configured based on the old
rss size.
So this patch fixes it by using the new rss size in both process.
Fixes: 93969dc14fcd ("net: hns3: refactor VF rss init APIs with new common rss init APIs") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230110115359.10163-1-lanhao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch fix the pulse per second output delta between
two synchronized end-points.
Based on Intel Discrete I225 Software User Manual Section
4.2.15 TimeSync Auxiliary Control Register, ST0[Bit 4] and
ST1[Bit 7] must be set to ensure that clock output will be
toggles based on frequency value defined. This is to ensure
that output of the PPS is aligned with the clock.
How to test:
1) Running time synchronization on both end points.
Ex: ptp4l --step_threshold=1 -m -f gPTP.cfg -i <interface name>
2) Configure PPS output using below command for both end-points
Ex: SDP0 on I225 REV4 SKU variant
3) Measure the output using analyzer for both end-points
Fixes: 87938851b6ef ("igc: enable auxiliary PHC functions for the i225") Signed-off-by: Christopher S Hall <christopher.s.hall@intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 11e9734bcb6a7361 ("mm/slab_common: unify NUMA and UMA version of
tracepoints") adds the field "node" into the tracepoints 'kmalloc' and
'kmem_cache_alloc', so this patch modifies the event process function to
support the field "node".
If field "node" is detected by checking function evsel__field(), it
stats the cross allocation.
When the "node" value is NUMA_NO_NODE (-1), it means the memory can be
allocated from any memory node, in this case, we don't account it as a
cross allocation.
Fixes: 11e9734bcb6a7361 ("mm/slab_common: unify NUMA and UMA version of tracepoints") Reported-by: Ravi Bangoria <ravi.bangoria@amd.com> Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Link: https://lore.kernel.org/r/20230108062400.250690-2-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 11e9734bcb6a7361 ("mm/slab_common: unify NUMA and UMA version of
tracepoints") removed tracepoints 'kmalloc_node' and
'kmem_cache_alloc_node', we need to consider the tool should be backward
compatible.
If it detect the tracepoint "kmem:kmalloc_node", this patch enables the
legacy tracepoints, otherwise, it will ignore them.
Fixes: 11e9734bcb6a7361 ("mm/slab_common: unify NUMA and UMA version of tracepoints") Reported-by: Ravi Bangoria <ravi.bangoria@amd.com> Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Link: https://lore.kernel.org/r/20230108062400.250690-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Including libbpf header files should be guarded by HAVE_LIBBPF_SUPPORT.
In bpf_counter.h, move the skeleton utilities under HAVE_BPF_SKEL.
Fixes: d6a735ef3277c45f ("perf bpf_counter: Move common functions to bpf_counter.h") Reported-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Mike Leach <mike.leach@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20230105172243.7238-1-mike.leach@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
resources allocated like mcam entries to support the Ntuple feature
and hash tables for the tc feature are not getting freed in driver
unbind. This patch fixes the issue.
Fixes: 2da489432747 ("octeontx2-pf: devlink params support to set mcam entry count") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Link: https://lore.kernel.org/r/20230109061325.21395-1-hkelam@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Use 'set -e' and an exit handler to stop the script if a command fails
and ensure the test environment is cleaned up in any case. Also, handle
the case where the script is interrupted by SIGINT.
The only command that's expected to fail is 'wait $ping_pid', since
it's killed by the script. Handle this case with '|| true' to make it
play well with 'set -e'.
Finally, return the Kselftest SKIP code (4) when the script breaks
because of an environment problem or a command line failure. The 0 and
1 return codes should now reliably indicate that all tests have been
run (0: all tests run and passed, 1: all tests run but at least one
failed, 4: test script didn't run completely).
This selftest currently runs half in the current namespace and half in
a netns of its own. Therefore, the test can fail if the current
namespace is already configured with incompatible parameters (for
example if it already has a veth0 interface).
Adapt the script to put both ends of the veth pair in their own netns.
Now veth0 is created in NS0 instead of the current namespace, while
veth1 is set up in NS1 (instead of the 'testing' netns).
The user visible netns names are randomised to minimise the risk of
conflicts with already existing namespaces. The cleanup() function
doesn't need to remove the virtual interface anymore: deleting NS0 and
NS1 automatically removes the virtual interfaces they contained.
We can remove $ns, which was only used to run ip commands in the
'testing' netns (let's use the builtin "-netns" option instead).
However, we still need a similar functionality as ping and tcpdump
now need to run in NS0. So we now have $RUN_NS0 for that.
Upon updating MAC security entity (SecY) in hw offload path, the macsec
security association (SA) initialization routine is called. In case of
extended packet number (epn) is enabled the salt and ssci attributes are
retrieved using the MACsec driver rx_sa context which is unavailable when
updating a SecY property such as encoding-sa hence the null dereference.
Fix by using the provided SA to set those attributes.
Fixes: 4411a6c0abd3 ("net/mlx5e: Support MACsec offload extended packet number (EPN)") Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently when macsec offload is set with extended packet number (epn)
enabled, the driver wrongly deduce the short secure channel identifier
(ssci) from the salt instead of the stand alone ssci attribute as it
should, consequently creating a mismatch between the kernel and driver's
ssci values.
Fix by using the ssci value from the relevant attribute.
Fixes: 4411a6c0abd3 ("net/mlx5e: Support MACsec offload extended packet number (EPN)") Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
.max_adj of ptp_clock_info acts as an absolute value for the amount in ppb
that can be set for a single call of .adjfine. This means that a single
call to .getfine cannot be greater than .max_adj or less than -(.max_adj).
Provides correct value for max frequency adjustment value supported by
devices.
The current code always does the accounting using the
stats from the parent interface (linked in the rq). This
doesn't work when there are child interfaces configured.
Fix this behavior by always using the stats from the child
interface priv. This will also work for parent only
interfaces: the child (netdev) and parent netdev (rq->netdev)
will point to the same thing.
A user is able to configure an arbitrary number of rx queues when
creating an interface via netlink. This doesn't work for child PKEY
interfaces because the child interface uses the parent receive channels.
Although the child shares the parent's receive channels, the number of
rx queues is important for the channel_stats array: the parent's rx
channel index is used to access the child's channel_stats. So the array
has to be at least as large as the parent's rx queue size for the
counting to work correctly and to prevent out of bound accesses.
This patch checks for the mentioned scenario and returns an error when
trying to create the interface. The error is propagated to the user.
PKEY sub interfaces share the receive queues with the parent interface.
While setting the sub interface queue count is not supported, it is
currently possible to change the number of queues of the parent interface.
Thus we can end up with inconsistent queue sizes between the parent and its
sub interfaces.
This change disallows setting the queue count on the parent interface when
sub interfaces are present.
This is achieved by introducing an explicit reference to the parent netdev
in the mlx5i_priv of the child interface. An additional counter is also
required on the parent side to detect when sub interfaces are attached and
for proper cleanup.
The rtnl lock is taken during the ethtool op and the sub interface
ndo_init/uninit ops. There is no race here around counting the sub
interfaces, reading the sub interfaces and setting the number of
channels. The ASSERT_RTNL was added to document that.
The native NIC port net device instance is being used as Uplink
representor. While changing profiles private resources are not
available, fix features ndo does not check if the netdev is present.
Add driver protection to verify private resources are ready.
Fixes: 7a9fb35e8c3a ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode") Signed-off-by: Roy Novich <royno@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Command may fail while driver is reloading and can't accept FW commands
till command interface is reinitialized. Such command failure is being
logged to command stats. This results in NULL pointer access as command
stats structure is being freed and reallocated during mlx5 devlink
reload (see kernel log below).
Fix it by making command stats statically allocated on driver probe.
When offloading TC NIC rule which has mod_hdr action, the
mod_hdr actions list is freed upon mod_hdr allocation.
In the new format of handling multi table actions and CT in
particular, the mod_hdr actions list is still relevant when
setting the pre and post rules and therefore, freeing the list
may cause adding rules which don't set the FTE_ID.
Therefore, the mod_hdr actions list needs to be kept for the
pre/post flows as well and should be left for these handler to
be freed.
Fixes: 8300f225268b ("net/mlx5e: Create new flow attr for multi table actions") Signed-off-by: Ariel Levkovich <lariel@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The 'TCA_MPLS_LABEL' attribute is of 'NLA_U32' type, but has a
validation type of 'NLA_VALIDATE_FUNCTION'. This is an invalid
combination according to the comment above 'struct nla_policy':
"
Meaning of `validate' field, use via NLA_POLICY_VALIDATE_FN:
NLA_BINARY Validation function called for the attribute.
All other Unused - but note that it's a union
"
This can trigger the warning [1] in nla_get_range_unsigned() when
validation of the attribute fails. Despite being of 'NLA_U32' type, the
associated 'min'/'max' fields in the policy are negative as they are
aliased by the 'validate' field.
Fix by changing the attribute type to 'NLA_BINARY' which is consistent
with the above comment and all other users of NLA_POLICY_VALIDATE_FN().
As a result, move the length validation to the validation function.
User resource lookups used rcu to avoid two extra atomics. Unfortunately
the rcu paths were buggy and it was easy to make the driver crash by
submitting command buffers from two different threads. Because the
lookups never show up in performance profiles replace them with a
regular spin lock which fixes the races in accesses to those shared
resources.
Fixes kernel oops'es in IGT's vmwgfx execution_buffer stress test and
seen crashes with apps using shared resources.
Fixes: e14c02e6b699 ("drm/vmwgfx: Look up objects without taking a reference") Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221207172907.959037-1-zack@kde.org Signed-off-by: Sasha Levin <sashal@kernel.org>
The vmwgfx driver has migrated from using the hashtable in vmwgfx_hashtab
to the linux/hashtable implementation. Remove the vmwgfx_hashtab from the
driver.
This is part of an effort to move from the vmwgfx_open_hash hashtable to
linux/hashtable implementation.
Refactor the ref_hash hashtable, used for fast lookup of reference objects
associated with a ttm file.
This also exposed a problem related to inconsistently using 32-bit and
64-bit keys with this hashtable. The hash function used changes depending
on the size of the type, and results are not consistent across numbers,
for example, hash_32(329) = 329, but hash_long(329) = 328. This would
cause the lookup to fail for objects already in the hashtable, since keys
of different sizes were being passed during adding and lookup. This was
not an issue before because vmwgfx_open_hash always used hash_long.
Fix this by always using 64-bit keys for this hashtable, which means that
hash_long is always used.
Vmwgfx's hashtab implementation needs to be replaced with linux/hashtable
to reduce maintenence burden.
As part of this effort, refactor the res_ht hashtable used for resource
validation during execbuf execution to use linux/hashtable implementation.
This also refactors vmw_validation_context to use vmw_sw_context as the
container for the hashtable, whereas before it used a vmwgfx_open_hash
directly. This makes vmw_validation_context less generic, but there is
no functional change since res_ht is the only instance where validation
context used a hashtable in vmwgfx driver.
Signed-off-by: Maaz Mombasawala <mombasawalam@vmware.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Zack Rusin <zackr@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-6-zack@kde.org
Stable-dep-of: a309c7194e8a ("drm/vmwgfx: Remove rcu locks from user resources") Signed-off-by: Sasha Levin <sashal@kernel.org>
Vmwgfx's hashtab implementation needs to be replaced with linux/hashtable
to reduce maintenance burden.
Refactor cmdbuf resource manager to use linux/hashtable.h implementation
as part of this effort.
Driver id registers are a new mechanism in the svga device to hint to the
device which driver is running. This should not change device behavior
in any way, but might be convenient to work-around specific bugs
in guest drivers.
The ice_gnss_tty_write() return directly if the write_buf alloc failed,
leaking the cmd_buf.
Fix by free cmd_buf if write_buf alloc failed.
Fixes: d6b98c8d242a ("ice: add write functionality for GNSS TTY") Signed-off-by: Yuan Can <yuancan@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When RISCV port was imported in 5.2, the O_* macros were taken with
their octal value and written as-is in hex, resulting in the getdents64()
to fail in nolibc-test.
Depending on the compiler used and the optimization options, the sbrk()
test was crashing, both on real hardware (mips-24kc) and in qemu. One
such example is kernel.org toolchain in version 11.3 optimizing at -Os.
Inspecting the sys_brk() call shows the following code:
It is obviously wrong, the "negu" instruction is placed in beqz's
delayed slot, and worse, there's no nop nor instruction after the
return, so the next function's first instruction (addiu sip,sip,-32)
will also be executed as part of the delayed slot that follows the
return.
This is caused by the ".set noreorder" directive in the _start block,
that applies to the whole program. The compiler emits code without the
delayed slots and relies on the compiler to swap instructions when this
option is not set. Removing the option would require to change the
startup code in a way that wouldn't make it look like the resulting
code, which would not be easy to debug. Instead let's just save the
default ordering before changing it, and restore it at the end of the
_start block. Now the code is correct:
Older Qualcomm platforms like APQ8016 do not have hardware support for
SoundWire, so kernel configurations made specifically for those platforms
will usually not have CONFIG_SOUNDWIRE enabled.
Unfortunately commit 8d89cf6ff229 ("ASoC: qcom: cleanup and fix
dependency of QCOM_COMMON") breaks those kernel configurations, because
SOUNDWIRE is now a required dependency for SND_SOC_QCOM_COMMON (and in
turn also SND_SOC_APQ8016_SBC). Trying to migrate such a kernel config
silently disables SND_SOC_APQ8016_SBC and breaks audio functionality.
The soundwire helpers in common.c are only used by two of the Qualcomm
audio machine drivers, so building and requiring CONFIG_SOUNDWIRE for
all platforms is unnecessary.
There is no need to stuff all common code into a single module. Fix the
issue by moving the soundwire helpers to a separate SND_SOC_QCOM_SDW
module/option that is selected only by the machine drivers that make
use of them. This also allows reverting the imply/depends changes from
the previous fix because both SM8250 and SC8280XP already depend on
SOUNDWIRE, so the soundwire helpers will be only built if SOUNDWIRE
is really enabled.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Fixes: 8d89cf6ff229 ("ASoC: qcom: cleanup and fix dependency of QCOM_COMMON") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20221231115506.82991-1-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Adjust size parameter in connect() to match the type of the parameter, to
fix "No such file or directory" error in selftests/net/af_unix/
test_oob_unix.c:127.
The existing code happens to work provided that the autogenerated pathname
is shorter than sizeof (struct sockaddr), which is why it hasn't been
noticed earlier.
Visible from the trace excerpt:
bind(3, {sa_family=AF_UNIX, sun_path="unix_oob_453059"}, 110) = 0
clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7fa6a6577a10) = 453060
[pid <child>] connect(6, {sa_family=AF_UNIX, sun_path="unix_oob_45305"}, 16) = -1 ENOENT (No such file or directory)
BUG: The filename is trimmed to sizeof (struct sockaddr).
Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Cc: Florian Westphal <fw@strlen.de> Reviewed-by: Florian Westphal <fw@strlen.de> Fixes: 314001f0bf92 ("af_unix: Add OOB support") Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Jaroslav reported a recent throughput regression with virtio_net
caused by blamed commit.
It is unclear if DODGY GSO packets coming from user space
can be accepted by GRO engine in the future with minimal
changes, and if there is any expected gain from it.
In the meantime, make sure to detect and flush DODGY packets.
Fixes: 5eddb24901ee ("gro: add support of (hw)gro packets to gro stack") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-and-bisected-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Cc: Coco Li <lixiaoyan@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
After searching for a protocol handler in dev_gro_receive, checking for
failure is redundant. Skip the failure code after finding the
corresponding handler.
Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20221108123320.GA59373@debian Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 7871f54e3dee ("gro: take care of DODGY packets") Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix a use-after-free that occurs in hcd when in_urb sent from
pn533_usb_send_frame() is completed earlier than out_urb. Its callback
frees the skb data in pn533_send_async_complete() that is used as a
transfer buffer of out_urb. Wait before sending in_urb until the
callback of out_urb is called. To modify the callback of out_urb alone,
separate the complete function of out_urb and ack_urb.
The currently lockless access to the xen console list in
vtermno_to_xencons() is incorrect, as additions and removals from the
list can happen anytime, and as such the traversal of the list to get
the private console data for a given termno needs to happen with the
lock held. Note users that modify the list already do so with the
lock taken.
Adjust current lock takers to use the _irq{save,restore} helpers,
since the context in which vtermno_to_xencons() is called can have
interrupts disabled. Use the _irq{save,restore} set of helpers to
switch the current callers to disable interrupts in the locked region.
I haven't checked if existing users could instead use the _irq
variant, as I think it's safer to use _irq{save,restore} upfront.
While there switch from using list_for_each_entry_safe to
list_for_each_entry: the current entry cursor won't be removed as
part of the code in the loop body, so using the _safe variant is
pointless.
PF netdev can request AF to enable or disable reception and transmission
on assigned CGX::LMAC. The current code instead of disabling or enabling
'reception and transmission' also disables/enable the LMAC. This patch
fixes this issue.
Commit fb70bf124b05 ("NFSD: Instantiate a struct file when creating a
regular NFSv4 file") added the ability to cache an open fd over a
compound. There are a couple of problems with the way this currently
works:
It's racy, as a newly-created nfsd_file can end up with its PENDING bit
cleared while the nf is hashed, and the nf_file pointer is still zeroed
out. Other tasks can find it in this state and they expect to see a
valid nf_file, and can oops if nf_file is NULL.
Also, there is no guarantee that we'll end up creating a new nfsd_file
if one is already in the hash. If an extant entry is in the hash with a
valid nf_file, nfs4_get_vfs_file will clobber its nf_file pointer with
the value of op_file and the old nf_file will leak.
Fix both issues by making a new nfsd_file_acquirei_opened variant that
takes an optional file pointer. If one is present when this is called,
we'll take a new reference to it instead of trying to open the file. If
the nfsd_file already has a valid nf_file, we'll just ignore the
optional file and pass the nfsd_file back as-is.
Also rework the tracepoints a bit to allow for an "opened" variant and
don't try to avoid counting acquisitions in the case where we already
have a cached open file.
Fixes: fb70bf124b05 ("NFSD: Instantiate a struct file when creating a regular NFSv4 file") Cc: Trond Myklebust <trondmy@hammerspace.com> Reported-by: Stanislav Saner <ssaner@redhat.com> Reported-and-Tested-by: Ruben Vestergaard <rubenv@drcmr.dk> Reported-and-Tested-by: Torkil Svensgaard <torkil@drcmr.dk> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The filecache refcounting is a bit non-standard for something searchable
by RCU, in that we maintain a sentinel reference while it's hashed. This
in turn requires that we have to do things differently in the "put"
depending on whether its hashed, which we believe to have led to races.
There are other problems in here too. nfsd_file_close_inode_sync can end
up freeing an nfsd_file while there are still outstanding references to
it, and there are a number of subtle ToC/ToU races.
Rework the code so that the refcount is what drives the lifecycle. When
the refcount goes to zero, then unhash and rcu free the object. A task
searching for a nfsd_file is allowed to bump its refcount, but only if
it's not already 0. Ensure that we don't make any other changes to it
until a reference is held.
With this change, the LRU carries a reference. Take special care to deal
with it when removing an entry from the list, and ensure that we only
repurpose the nf_lru list_head when the refcount is 0 to ensure
exclusive access to it.
Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of: 0b3a551fa58b ("nfsd: fix handling of cached open files in nfsd4_open codepath") Signed-off-by: Sasha Levin <sashal@kernel.org>
Add a tracepoint to capture the number of filecache-triggered fsync
calls and which files needed it. Also, record when an fsync triggers
a write verifier reset.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
Stable-dep-of: 0b3a551fa58b ("nfsd: fix handling of cached open files in nfsd4_open codepath") Signed-off-by: Sasha Levin <sashal@kernel.org>
In a coming patch, we're going to rework how the filecache refcounting
works. Move some code around in the function to reduce the churn in the
later patches, and rename some of the functions with (hopefully) clearer
names: nfsd_file_flush becomes nfsd_file_fsync, and
nfsd_file_unhash_and_dispose is renamed to nfsd_file_unhash_and_queue.
Also, the nfsd_file_put_final tracepoint is renamed to nfsd_file_free,
to better match the name of the function from which it's called.
Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of: 0b3a551fa58b ("nfsd: fix handling of cached open files in nfsd4_open codepath") Signed-off-by: Sasha Levin <sashal@kernel.org>
We're counting mapping->nrpages, but not all of those are necessarily
dirty. We don't really have a simple way to count just the dirty pages,
so just remove this stat since it's not accurate.
Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of: 0b3a551fa58b ("nfsd: fix handling of cached open files in nfsd4_open codepath") Signed-off-by: Sasha Levin <sashal@kernel.org>
NFSv4 operations manage the lifetime of nfsd_file items they use by
means of NFSv4 OPEN and CLOSE. Hence there's no need for them to be
garbage collected.
Introduce a mechanism to enable garbage collection for nfsd_file
items used only by NFSv2/3 callers.
Note that the change in nfsd_file_put() ensures that both CLOSE and
DELEGRETURN will actually close out and free an nfsd_file on last
reference of a non-garbage-collected file.
Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=394 Suggested-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: NeilBrown <neilb@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org>
Stable-dep-of: 0b3a551fa58b ("nfsd: fix handling of cached open files in nfsd4_open codepath") Signed-off-by: Sasha Levin <sashal@kernel.org>
That commit attempted to make files available to other users as soon
as all NFSv4 clients were done with them, rather than waiting until
the filecache LRU had garbage collected them.
It gets the reference counting wrong, for one thing.
But it also misses that DELEGRETURN should release a file in the
same fashion. In fact, any nfsd_file_put() on an file held open
by an NFSv4 client needs potentially to release the file
immediately...
Clear the way for implementing that idea.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: NeilBrown <neilb@suse.de>
Stable-dep-of: 0b3a551fa58b ("nfsd: fix handling of cached open files in nfsd4_open codepath") Signed-off-by: Sasha Levin <sashal@kernel.org>
In a moment I'm going to introduce separate nfsd_file types, one of
which is garbage-collected; the other, not. The garbage-collected
variety is to be used by NFSv2 and v3, and the non-garbage-collected
variety is to be used by NFSv4.
nfsd_commit() is invoked by both NFSv3 and NFSv4 consumers. We want
nfsd_commit() to find and use the correct variety of cached
nfsd_file object for the NFS version that is in use.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: NeilBrown <neilb@suse.de>
Stable-dep-of: 0b3a551fa58b ("nfsd: fix handling of cached open files in nfsd4_open codepath") Signed-off-by: Sasha Levin <sashal@kernel.org>
node 1 | node 2
------ | ------
link is established | link is established
reboot | link is reset
up | send discovery message
receive discovery message |
link is established | link is established
send discovery message |
| receive discovery message
| link is reset (unexpected)
| send reset message
link is reset |
It is due to delayed re-discovery as described in function
tipc_node_check_dest(): "this link endpoint has already reset
and re-established contact with the peer, before receiving a
discovery message from that node."
However, commit 598411d70f85 has changed the condition for calling
tipc_node_link_down() which was the acceptance of new media address.
This commit fixes this by restoring the old and correct behavior.
Fixes: 598411d70f85 ("tipc: make resetting of links non-atomic") Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The fix commit the commit e4ea77f8e53f ("ALSA: usb-audio: Always apply
the hw constraints for implicit fb sync") tried to address the bug
where an incorrect PCM parameter is chosen when two (implicit fb)
streams are set up at the same time. This change had, however, some
side effect: once when the sync endpoint is chosen and set up, this
restriction is applied at the next hw params unless it's freed via hw
free explicitly.
This patch is a workaround for the problem by relaxing the hw
constraints a bit for the implicit fb sync. We still keep applying
the hw constraints for implicit fb sync, but only when the matching
sync EP is being used by other streams.
At the PCM hw params, we may re-configure the endpoints and it's done
by a temporary EP close followed by re-open. A potential problem
there is that the EP might be already running internally at the PCM
prepare stage; it's seen typically in the playback stream with the
implicit feedback sync. As this stream start isn't tracked by the
core PCM layer, we'd need to stop it explicitly, and that's the
missing piece.
This patch adds the stop_endpoints() call at snd_usb_hw_params() to
assure the stream stop before closing the EPs.
When MTD or MTD_CFI_GEOMETRY is disabled, the spi-intel driver
fails to build, as it includes the shared CFI header:
include/linux/mtd/cfi.h:62:2: error: #warning No CONFIG_MTD_CFI_Ix selected. No NOR chip support can work. [-Werror=cpp]
62 | #warning No CONFIG_MTD_CFI_Ix selected. No NOR chip support can work.
linux/mtd/spi-nor.h does not actually need to include cfi.h, so
remove the inclusion here to fix the warning. This uncovers a
missing #include in spi-nor/core.c so add that there to
prevent a different build issue.
This fixes the following compile error on mips architecture with clang
version 16.0.0 reported by the 0-DAY CI Kernel Test Service:
ld.lld: error: undefined symbol: __udivdi3
referenced by scpart.c
mtd/parsers/scpart.o:(scpart_parse) in archive drivers/built-in.a
As a workaround this makes 'offs' a 32-bit type. This is enough, because
the mtd containing partition table practically does not exceed 1 MB. We
can revert this when the [Link] has been resolved.
Restore volume after charge pump and PGA activation to ensure
that volume settings are correctly applied when re-enabling codec
from SND_SOC_BIAS_OFF state.
CLASS_W, CHARGE_PUMP and POWER_MANAGEMENT_2 register configuration
affect how the volume register are applied and must be configured first.
of_icc_get() alloc resources for path1, we should release it when not
need anymore. Early return when IS_ERR_OR_NULL(path0) may leak path1.
Defer getting path1 to fix this.
Fixes: b9364eed9232 ("drm/msm/dpu: Move min BW request and full BW disable back to mdss") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/514264/ Link: https://lore.kernel.org/r/20221207065922.2086368-1-linmq006@gmail.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Make the description of @init to @p in dpu_encoder_phys_wb_init()
and remove @wb_roi in dpu_encoder_phys_wb_setup_fb() to clear the below
warnings:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c:139: warning: Excess function parameter 'wb_roi' description in 'dpu_encoder_phys_wb_setup_fb'
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c:699: warning: Function parameter or member 'p' not described in 'dpu_encoder_phys_wb_init'
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c:699: warning: Excess function parameter 'init' description in 'dpu_encoder_phys_wb_init'
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3067 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/511605/ Link: https://lore.kernel.org/r/20221115014902.45240-1-yang.lee@linux.alibaba.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The maximum name length for a platform_device_id entry is 20 characters
including the trailing NUL byte. The sof_nau8825.c file exceeds that,
which causes an obscure error message:
sound/soc/intel/boards/snd-soc-sof_nau8825.mod.c:35:45: error: illegal character encoding in string literal [-Werror,-Winvalid-source-encoding]
MODULE_ALIAS("platform:adl_max98373_nau8825<U+0018><AA>");
^~~~
include/linux/module.h:168:49: note: expanded from macro 'MODULE_ALIAS'
^~~~~~
include/linux/module.h:165:56: note: expanded from macro 'MODULE_INFO'
^~~~
include/linux/moduleparam.h:26:47: note: expanded from macro '__MODULE_INFO'
= __MODULE_INFO_PREFIX __stringify(tag) "=" info
I could not figure out how to make the module handling robust enough
to handle this better, but as a quick fix, using slightly shorter
names that are still unique avoids the build issue.
When SSU/enter hibern8 fail in WLUN suspend flow, trigger the error handler
and return busy to break the suspend. Otherwise the consumer will get
stuck in runtime suspend status.
Fixes: b294ff3e3449 ("scsi: ufs: core: Enable power management for wlun") Signed-off-by: Peter Wang <peter.wang@mediatek.com> Link: https://lore.kernel.org/r/20221208072520.26210-1-peter.wang@mediatek.com Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / users / jedix / linux-maple.git / log