which is due to bio->bi_bdev being NULL. This can happen if we have two
tasks doing polled IO, and task B ends up completing IO from task A if
they are sharing a poll queue. If task B completes the IO and puts the
bio into our cache, then it can allocate that bio again before task A
is done polling for it. As that would necessitate a preempt between the
two tasks, it's enough to just be a bit more careful in checking for
whether or not bio->bi_bdev is NULL.
This isn't strictly needed in terms of correctness, but it does allow
polling to know if the bio has been put already by a different task
and hence avoid polling something that we don't need to.
If we're doing a large IO request which needs to be split into multiple
bios for issue, then we can run into the same situation as the below
marked commit fixes - parts will complete just fine, one or more parts
will fail to allocate a request. This will result in a partially
completed read or write request, where the caller gets EAGAIN even though
parts of the IO completed just fine.
Do the same for large bios as we do for splits - fail a NOWAIT request
with EAGAIN. This isn't technically fixing an issue in the below marked
patch, but for stable purposes, we should have either none of them or
both.
This depends on: 613b14884b85 ("block: handle bio_split_to_limits() NULL return")
Cc: stable@vger.kernel.org # 5.15+ Fixes: 9cea62b2cbab ("block: don't allow splitting of a REQ_NOWAIT bio") Link: https://github.com/axboe/liburing/issues/766 Reported-and-tested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The coreboot framebuffer doesn't support transparency, its 'reserved'
bit field is merely padding for byte/word alignment of pixel colors [1].
When trying to match the framebuffer to a simplefb format, the kernel
driver unnecessarily requires the format's transparency bit field to
exactly match this padding, even if the former is zero-width.
Due to a coreboot bug [2] (fixed upstream), some boards misreport the
reserved field's size as equal to its position (0x18 for both on a
'Lick' Chromebook), and the driver fails to probe where it would have
otherwise worked fine with e.g. the a8r8g8b8 or x8r8g8b8 formats.
Remove the transparency comparison with reserved bits. When the
bits-per-pixel and other color components match, transparency will
already be in a subset of the reserved field. Not forcing it to match
reserved bits allows the driver to work on the boards which misreport
the reserved field. It also enables using simplefb formats that don't
have transparency bits, although this doesn't currently happen due to
format support and ordering in linux/platform_data/simplefb.h.
fw_devlink can sometimes try to create a device link with the consumer
and supplier as the same device. These attempts will fail (correctly),
but are harmless. So, avoid printing an error for these cases. Also, add
more detail to the error message.
The referenced commit added a wrapper for drm_gem_shmem_get_pages_sgt(),
but in the process it accidentally changed the export type from GPL to
non-GPL. Switch it back to GPL.
Make sure to get an up-to-date TCP_Server_Info::nr_targets value prior
to waiting the server to be reconnected in smb2_reconnect(). It is
set in cifs_tcp_ses_needs_reconnect() and protected by
TCP_Server_Info::srv_lock.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We had a bug report that xfstest generic/355 was failing on NFSv4.0.
This test sets various combinations of setuid/setgid modes and tests
whether DIO writes will cause them to be stripped.
What I found was that the server did properly strip those bits, but
the client didn't notice because it held a delegation that was not
recalled. The recall didn't occur because the client itself was the
one generating the activity and we avoid recalls in that case.
Clearing setuid bits is an "implicit" activity. The client didn't
specifically request that we do that, so we need the server to issue a
CB_RECALL, or avoid the situation entirely by not issuing a delegation.
The easiest fix here is to simply not give out a delegation if the file
is being opened for write, and the mode has the setuid and/or setgid bit
set. Note that there is a potential race between the mode and lease
being set, so we test for this condition both before and after setting
the lease.
This patch fixes generic/355, generic/683 and generic/684 for me. (Note
that 355 fails only on v4.0, and 683 and 684 require NFSv4.2 to run and
fail).
Reported-by: Boyang Xue <bxue@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
At first, I thought this might be a source of nfsd_file overputs, but
the current callers seem to avoid an extra put when nfsd4_verify_copy
returns an error.
Still, it's "bad form" to leave the pointers filled out when we don't
have a reference to them anymore, and that might lead to bugs later.
Zero them out as a defensive coding measure.
Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the UFS error handling flow, the host will send a device management cmd
(NOP OUT) to the device for link recovery. If this cmd times out and
clearing the doorbell fails, ufshcd_wait_for_dev_cmd() will do nothing and
return. hba->dev_cmd.complete struct is not set to NULL.
When this happens, if cmd has been completed by device, then we will call
complete() in __ufshcd_transfer_req_compl(). Because the complete struct is
allocated on the stack, the following crash will occur:
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic at
once.
Use devm_kasprintf() instead of kasprintf() to avoid any potential
leaks. At the moment drivers have no remove functionality thus
there is no need for fixes tag.
Coretemp's platform driver is unconventional. All the real work is done
globally by the initcall and CPU hotplug notifiers, while the "driver"
effectively just wraps an allocation and the registration of the hwmon
interface in a long-winded round-trip through the driver core. The whole
logic of dynamically creating and destroying platform devices to bring
the interfaces up and down is error prone, since it assumes
platform_device_add() will synchronously bind the driver and set drvdata
before it returns, thus results in a NULL dereference if drivers_autoprobe
is turned off for the platform bus. Furthermore, the unusual approach of
doing that from within a CPU hotplug notifier, already commented in the
code that it deadlocks suspend, also causes lockdep issues for other
drivers or subsystems which may want to legitimately register a CPU
hotplug notifier from a platform bus notifier.
All of these issues can be solved by ripping this unusual behaviour out
completely, simply tying the platform devices to the lifetime of the
module itself, and directly managing the hwmon interfaces from the
hotplug notifiers. There is a slight user-visible change in that
/sys/bus/platform/drivers/coretemp will no longer appear, and
/sys/devices/platform/coretemp.n will remain present if package n is
hotplugged off, but hwmon users should really only be looking for the
presence of the hwmon interfaces, whose behaviour remains unchanged.
In gfs2_make_fs_rw(), make sure to call gfs2_consist() to report an
inconsistency and mark the filesystem as withdrawn when
gfs2_find_jhead() fails.
At the end of gfs2_make_fs_rw(), when we discover that the filesystem
has been withdrawn, make sure we report an error. This also replaces
the gfs2_withdrawn() check after gfs2_find_jhead().
This reverts commit fac53471d0ea9693d314aa2df08d62b2e7e3a0f8.
The following change: move the drm_dev_unplug call after
amdgpu_driver_unload_kms in amdgpu_pci_remove. The reason is
the following: amdgpu_pci_remove calls drm_dev_unregister
and it should be called first to ensure userspace can't access the
device instance anymore. If we call drm_dev_unplug after
amdgpu_driver_unload_kms then we observe IGT PCI software unplug
test failure (kernel hung) for all ASICs. This is how this
regression was found.
After this revert, the following commands do work not, but it would
be fixed in the next commit:
- sudo modprobe -r amdgpu
- sudo modprobe amdgpu
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The compiler has no way to know if "id" is within the array bounds of
the regulators array. Add a check for this and a build-time check that
the regulators and reg_voltage_map arrays are sized the same. Seen with
GCC 13:
../drivers/regulator/s5m8767.c: In function 's5m8767_pmic_probe':
../drivers/regulator/s5m8767.c:936:35: warning: array subscript [0, 36] is outside array bounds of 'struct regulator_desc[37]' [-Warray-bounds=]
936 | regulators[id].vsel_reg =
| ~~~~~~~~~~^~~~
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: linux-samsung-soc@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230128005358.never.313-kees@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Walking the dram->cs array was seen as accesses beyond the first array
item by the compiler. Instead, use the array index directly. This allows
for run-time bounds checking under CONFIG_UBSAN_BOUNDS as well. Seen
with GCC 13 with -fstrict-flex-arrays:
../sound/soc/kirkwood/kirkwood-dma.c: In function
'kirkwood_dma_conf_mbus_windows.constprop':
../sound/soc/kirkwood/kirkwood-dma.c:90:24: warning: array subscript 0 is outside array bounds of 'const struct mbus_dram_window[0]' [-Warray-bounds=]
90 | if ((cs->base & 0xffff0000) < (dma & 0xffff0000)) {
| ~~^~~~~~
Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: alsa-devel@alsa-project.org Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230127224128.never.410-kees@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If panic_on_warn is set and compress stream(DPCM) is started,
then kernel panic occurred because card->pcm_mutex isn't held appropriately.
In the following functions, warning were issued at this line
"snd_soc_dpcm_mutex_assert_held".
static int dpcm_be_connect(struct snd_soc_pcm_runtime *fe,
struct snd_soc_pcm_runtime *be, int stream)
{
...
snd_soc_dpcm_mutex_assert_held(fe);
...
}
Add missing DSC hardware block register ranges to the snapshot utility
to include them in dmesg (on MSM_DISP_SNAPSHOT_DUMP_IN_CONSOLE) and the
kms debugfs file.
Protect re-using the same timestamp buffer record before actually
adding it to the to interrupt wait list.
Mark ts buff offset as in use in the spinlock protection area of the
interrupt wait list to avoid getting in the re-use section in
ts_buff_get_kernel_ts_record before adding the node to the list.
this scenario might happen when multiple threads are racing on
same offset and one thread could set data in the ts buff in
ts_buff_get_kernel_ts_record then the other thread takes over
and get to ts_buff_get_kernel_ts_record and we will try
to re-use the same ts buff offset then we will try to
delete a non existing node from the list.
[Why]
After enabling S/G on dcn314 a screen corruption may be observed.
HostVM flag should be set in S/G mode to be included in DML calculations.
[How]
In S/G mode gpu_vm_support flag is set.
Use its value to init is_hvm_enabled.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[why & how]
__drm_dbg() parameter set format is wrong and not aligned with the
format under CONFIG_DRM_USE_DYNAMIC_DEBUG is on. Fix it.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
On H3 ES1.x two bits in DPLLCR are used to select the DU input dot clock
source. These are bits 20 and 21 for DU2, and bits 22 and 23 for DU1. On
non-ES1.x, only the higher bits are used (bits 21 and 23), and the lower
bits are reserved and should be set to 0.
The current code always sets the lower bits, even on non-ES1.x.
For both DU1 and DU2, on all SoC versions, when writing zeroes to those
bits the input clock is DCLKIN, and thus there's no difference between
ES1.x and non-ES1.x.
For DU1, writing 0b10 to the bits (or only writing the higher bit)
results in using PLL0 as the input clock, so in this case there's also
no difference between ES1.x and non-ES1.x.
However, for DU2, writing 0b10 to the bits results in using PLL0 as the
input clock on ES1.x, whereas on non-ES1.x it results in using PLL1. On
ES1.x you need to write 0b11 to select PLL1.
The current code always writes 0b11 to PLCS0 field to select PLL1 on all
SoC versions, which works but causes an illegal (in the sense of not
allowed by the documentation) write to a reserved bit field.
To remove the illegal bit write on PLSC0 we need to handle the input dot
clock selection differently for ES1.x and non-ES1.x.
Add a new quirk, RCAR_DU_QUIRK_H3_ES1_PLL, for this. This way we can
always set the bit 21 on PLSC0 when choosing the PLL as the source
clock, and additionally set the bit 20 when on ES1.x.
rcar_du_crtc.c does a soc_device_match() in
rcar_du_crtc_set_display_timing() to find out if the SoC is H3 ES1.x, and
if so, apply a workaround.
We will need another H3 ES1.x check in the following patch, so rather than
adding more soc_device_match() calls, let's add a rcar_du_device_info
entry for the ES1, and a quirk flag,
RCAR_DU_QUIRK_H3_ES1_PCLK_STABILITY, for the workaround.
The XP-PEN Deco Pro MW is a UGEE v2 device with a frame with 8 buttons,
a bitmap dial and a mouse. Its pen has 2 buttons, supports tilt and
pressure.
It can be connected using a USB cable or, to use it in wireless mode,
using a USB Bluetooth dongle. When it is connected in wireless mode the
device battery is used to power it.
All the pieces to support it are already in place. Add its ID and
quirks in order to support the device.
Link: https://github.com/DIGImend/digimend-kernel-drivers/issues/622 Tested-by: Andreas Grosse <andig.mail@t-online.de> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
The XP-PEN Deco Pro SW is a UGEE v2 device with a frame with 8 buttons,
a bitmap dial and a mouse; however, the UCLOGIC_MOUSE_FRAME_QUIRK is
required because it reports an incorrect frame type. Its pen has 2
buttons, supports tilt and pressure.
It can be connected using a USB cable or, to use it in wireless mode,
using a USB Bluetooth dongle. When it is connected in wireless mode the
device battery is used to power it.
All the pieces to support it are already in place. Add its ID and
quirks in order to support the device.
Some UGEE v2 tablets have a wireless version with an internal battery
and their firmware is able to report their battery level.
However, there was not found a field on their descriptor indicating
whether the tablet has battery or not, making it mandatory to classify
such devices through the UCLOGIC_BATTERY_QUIRK quirk.
Tested-by: Mia Kanashi <chad@redpilled.dev> Tested-by: Andreas Grosse <andig.mail@t-online.de> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
The report descriptor used to get information about UGEE v2 devices is
incorrect in the XP-PEN Deco Pro SW. It indicates that the device frame
is of type UCLOGIC_PARAMS_FRAME_BUTTONS but the device has a frame of
type UCLOGIC_PARAMS_FRAME_MOUSE.
Here is the original report descriptor:
0x0e 0x03 0xc8 0xb3 0x34 0x65 0x08 0x00 0xff 0x1f 0xd8 0x13 0x00 0x00
^ This byte should be 2
Add a quirk to be able to fix the reported frame type.
Tested-by: Mia Kanashi <chad@redpilled.dev> Tested-by: Andreas Grosse <andig.mail@t-online.de> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
Always free the console font when deinitializing the framebuffer
console. Subsequent framebuffer consoles will then use the default
font. Rely on userspace to load any user-configured font for these
consoles.
Commit ae1287865f53 ("fbcon: don't lose the console font across
generic->chip driver switch") was introduced to work around losing
the font during graphics-device handover. [1][2] It kept a dangling
pointer with the font data between loading the two consoles, which is
fairly adventurous hack. It also never covered cases when the other
consoles, such as VGA text mode, where involved.
The problem has meanwhile been solved in userspace. Systemd comes
with a udev rule that re-installs the configured font when a console
comes up. [3] So the kernel workaround can be removed.
This also removes one of the two special cases triggered by setting
FBINFO_MISC_FIRMWARE in an fbdev driver.
Tested during device handover from efifb and simpledrm to radeon. Udev
reloads the configured console font for the new driver's terminal.
During the sysfs firmware write process, a use-after-free read warning is
logged from the lpfc_wr_object() routine:
BUG: KFENCE: use-after-free read in lpfc_wr_object+0x235/0x310 [lpfc]
Use-after-free read at 0x0000000000cf164d (in kfence-#111):
lpfc_wr_object+0x235/0x310 [lpfc]
lpfc_write_firmware.cold+0x206/0x30d [lpfc]
lpfc_sli4_request_firmware_update+0xa6/0x100 [lpfc]
lpfc_request_firmware_upgrade_store+0x66/0xb0 [lpfc]
kernfs_fop_write_iter+0x121/0x1b0
new_sync_write+0x11c/0x1b0
vfs_write+0x1ef/0x280
ksys_write+0x5f/0xe0
do_syscall_64+0x59/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The driver accessed wr_object pointer data, which was initialized into
mailbox payload memory, after the mailbox object was released back to the
mailbox pool.
Fix by moving the mailbox free calls to the end of the routine ensuring
that we don't reference internal mailbox memory after release.
Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Use page aligned size to reserve memory usage because page aligned TTM
BO size is used to unreserve memory usage, otherwise no page aligned
size causes memory usage accounting unbalanced.
Change vram_used definition type to int64_t to be able to trigger
WARN_ONCE(adev && adev->kfd.vram_used < 0, "..."), to help debug the
accounting issue with warning and backtrace.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
iio was allocated in atom_index_iio() called by atom_parse(),
but it doesn't got released when the dirver is shutdown.
Fix this kmemleak by free it in radeon_atombios_fini().
Signed-off-by: Liwei Song <liwei.song@windriver.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
On some monitors we see a brief flash of corruption during the
monitor disable sequence caused by FIFO being disabled in the middle
of an active DP stream.
[How]
Wait until DP vid stream is disabled before turning off the FIFO.
The FIFO reset on DP unblank should take care of clearing any FIFO
error, if any.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Syed Hassan <Syed.Hassan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The pixel data for the ILI9486 is always 16-bits wide and it must be
sent over the SPI bus. When the controller is only able to deal with
8-bit transfers, this 16-bits data needs to be swapped before the
sending to account for the big endian bus, this is on the contrary not
needed when the SPI controller already supports 16-bits transfers.
The decision about swapping the pixel data or not is taken in the MIPI
DBI code by probing the controller capabilities: if the controller only
suppors 8-bit transfers the data is swapped, otherwise it is not.
This swapping/non-swapping is relying on the assumption that when the
controller does support 16-bit transactions then the data is sent
unswapped in 16-bits-per-word over SPI.
The problem with the ILI9486 driver is that it is forcing 8-bit
transactions also for controllers supporting 16-bits, violating the
assumption and corrupting the pixel data.
Align the driver to what is done in the MIPI DBI code by adjusting the
transfer size to the maximum allowed by the SPI controller.
[Why]
Fixing smatch error:
dm_resume() error: we previously assumed 'aconnector->dc_link' could be null
[How]
Check if dc_link null at the beginning of the loop,
so further checks can be dropped.
Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[WHY]
It causes regression AMD source will not write DPCD 340.
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Ian Chen <ian.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Like the ASUS T100HAN for which there is already a quirk,
the DynaBook K50 has a 800x1280 portrait screen mounted
in the tablet part of a landscape oriented 2-in-1.
Update the quirk to be more generic and apply to this device.
This is a followup of commit 2558b8039d05 ("net: use a bounce
buffer for copying skb->mark")
x86 and powerpc define user_access_begin, meaning
that they are not able to perform user copy checks
when using user_write_access_begin() / unsafe_copy_to_user()
and friends [1]
Instead of waiting bugs to trigger on other arches,
add a check_object_size() in put_cmsg() to make sure
that new code tested on x86 with CONFIG_HARDENED_USERCOPY=y
will perform more security checks.
[1] We can not generically call check_object_size() from
unsafe_copy_to_user() because UACCESS is enabled at this point.
Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Baoquan He reported lots of KFENCE reports when /proc/kcore is read,
e.g. with crash or even simpler with dd:
BUG: KFENCE: invalid read in copy_from_kernel_nofault+0x5e/0x120
Invalid read at 0x00000000f4f5149f:
copy_from_kernel_nofault+0x5e/0x120
read_kcore+0x6b2/0x870
proc_reg_read+0x9a/0xf0
vfs_read+0x94/0x270
ksys_read+0x70/0x100
__do_syscall+0x1d0/0x200
system_call+0x82/0xb0
The reason for this is that read_kcore() simply reads memory that might
have been unmapped by KFENCE with copy_from_kernel_nofault(). Any fault due
to pages being unmapped by KFENCE would be handled gracefully by the fault
handler (exception table fixup).
However the s390 fault handler first reports the fault, and only afterwards
would perform the exception table fixup. Most architectures have this in
reversed order, which also avoids the false positive KFENCE reports when an
unmapped page is accessed.
Therefore change the s390 fault handler so it handles exception table
fixups before KFENCE page faults are reported.
Reported-by: Baoquan He <bhe@redhat.com> Tested-by: Baoquan He <bhe@redhat.com> Acked-by: Alexander Potapenko <glider@google.com> Link: https://lore.kernel.org/r/20230213183858.1473681-1-hca@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Completion responses to SEND_RNDIS_PKT messages are currently processed
regardless of the status in the response, so that resources associated
with the request are freed. While this is appropriate, code bugs that
cause sending a malformed message, or errors on the Hyper-V host, go
undetected. Fix this by checking the status and outputting a rate-limited
message if there is an error.
Only 8852C chip has valid pages on RTW89_DBG_SEL_MAC_30. To other chips,
this section is an address hole. It will lead to crash if trying to access
this section on chips except for 8852C. So, we avoid that.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230119063529.61563-2-pkshih@realtek.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Cc: Sean Wang <sean.wang@mediatek.com> Cc: Anson Tsao <anson.tsao@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic at
once.
While there is logic about the difference between ksize and usize,
copy_struct_from_user() didn't check the size of the destination buffer
(when it was known) against ksize. Add this check so there is an upper
bounds check on the possible memset() call, otherwise lower bounds
checks made by callers will trigger bounds warnings under -Warray-bounds.
Seen under GCC 13:
In function 'copy_struct_from_user',
inlined from 'iommufd_fops_ioctl' at
../drivers/iommu/iommufd/main.c:333:8:
../include/linux/fortify-string.h:59:33: warning: '__builtin_memset' offset [57, 4294967294] is out of the bounds [0, 56] of object 'buf' with type 'union ucmd_buffer' [-Warray-bounds=]
59 | #define __underlying_memset __builtin_memset
| ^
../include/linux/fortify-string.h:453:9: note: in expansion of macro '__underlying_memset'
453 | __underlying_memset(p, c, __fortify_size); \
| ^~~~~~~~~~~~~~~~~~~
../include/linux/fortify-string.h:461:25: note: in expansion of macro '__fortify_memset_chk'
461 | #define memset(p, c, s) __fortify_memset_chk(p, c, s, \
| ^~~~~~~~~~~~~~~~~~~~
../include/linux/uaccess.h:334:17: note: in expansion of macro 'memset'
334 | memset(dst + size, 0, rest);
| ^~~~~~
../drivers/iommu/iommufd/main.c: In function 'iommufd_fops_ioctl':
../drivers/iommu/iommufd/main.c:311:27: note: 'buf' declared here
311 | union ucmd_buffer buf;
| ^~~
GCC does not like having a partially allocated object, since it cannot
reason about it for bounds checking when it is passed to other code.
Instead, fully allocate sig_inputArgs. (Alternatively, sig_inputArgs
should be defined as a struct coda_in_hdr, if it is actually not using
any other part of the union.) Seen under GCC 13:
../fs/coda/upcall.c: In function 'coda_upcall':
../fs/coda/upcall.c:801:22: warning: array subscript 'union inputArgs[0]' is partly outside array bounds of 'unsigned char[20]' [-Warray-bounds=]
801 | sig_inputArgs->ih.opcode = CODA_SIGNAL;
| ^~
Multiple Ideapad Z570 variants need acpi_backlight=native to force native
use on these pre Windows 8 machines since acpi_video backlight control
does not work here.
The original DMI quirk matches on a product_name of "102434U" but other
variants may have different product_name-s such as e.g. "1024D9U".
Move to checking product_version instead as is more or less standard for
Lenovo DMI quirks for similar reasons.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This ends up being because of https://gcc.gnu.org/git/gitweb.cgi?p=gcc.git;h=b0241ce6e37031
upstream in GCC which changes the visibility of some types used by the kernel's
plugin infrastructure like tree_code_type.
After discussion with the GCC folks, we found that the kernel needs to be building
plugins with the same flags used to build GCC - and GCC defaults to gnu++17
right now. The minimum GCC version needed to build the kernel is GCC 5.1
and GCC 5.1 already defaults to gnu++14 anyway, so just drop the flag, as
all GCCs that could be used to build GCC already default to an acceptable
version which was >= the version we forced via flags until now.
Bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108634 Signed-off-by: Sam James <sam@gentoo.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230201230009.2252783-1-sam@gentoo.org Signed-off-by: Sasha Levin <sashal@kernel.org>
Syzbot created some code which matched the right sockaddr struct size
but used AF_XDP (0x2C) instead of AF_CAN (0x1D) in the address family
field:
bind$xdp(r2, &(0x7f0000000540)={0x2c, 0x0, r4, 0x0, r2}, 0x10)
^^^^
This has no funtional impact but the userspace should be notified about
the wrong address family field content.
static analyzer detect null pointer dereference case for 'type'
function __nft_obj_type_get() can return NULL value which require to handle
if type is NULL pointer return -ENOENT.
This is a theoretical issue, since an existing object has a type, but
better add this failsafe check.
---[ Real Memory Copy Area Start ]---
0x001bfffffffff000-0x001c000000000000 4K PTE I
---[ Kasan Shadow Start ]---
---[ Real Memory Copy Area End ]---
0x001c000000000000-0x001c000200000000 8G PMD RW NX
...
---[ Kasan Shadow End ]---
ptdump does a stable sort of markers. Move kasan markers after
memcpy real to avoid swapping.
Occasionnaly we may get oversized packets from the hardware which
exceed the nomimal 2KiB buffer size we allocate SKBs with. Add an early
check which drops the packet to avoid invoking skb_over_panic() and move
on to processing the next packet.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
To work around a Clang __builtin_object_size bug that shows up under
CONFIG_FORTIFY_SOURCE and UBSAN_BOUNDS, move the per-loop-iteration
mem_block wipe into a single wipe of the entire pool structure after
the loop.
Bugs have been reported on 8 sockets x86 machines in which the TSC was
wrongly disabled when the system is under heavy workload.
[ 818.380354] clocksource: timekeeping watchdog on CPU336: hpet wd-wd read-back delay of 1203520ns
[ 818.436160] clocksource: wd-tsc-wd read-back delay of 181880ns, clock-skew test skipped!
[ 819.402962] clocksource: timekeeping watchdog on CPU338: hpet wd-wd read-back delay of 324000ns
[ 819.448036] clocksource: wd-tsc-wd read-back delay of 337240ns, clock-skew test skipped!
[ 819.880863] clocksource: timekeeping watchdog on CPU339: hpet read-back delay of 150280ns, attempt 3, marking unstable
[ 819.936243] tsc: Marking TSC unstable due to clocksource watchdog
[ 820.068173] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
[ 820.092382] sched_clock: Marking unstable (818769414384, 1195404998)
[ 820.643627] clocksource: Checking clocksource tsc synchronization from CPU 267 to CPUs 0,4,25,70,126,430,557,564.
[ 821.067990] clocksource: Switched to clocksource hpet
This can be reproduced by running memory intensive 'stream' tests,
or some of the stress-ng subcases such as 'ioport'.
The reason for these issues is the when system is under heavy load, the
read latency of the clocksources can be very high. Even lightweight TSC
reads can show high latencies, and latencies are much worse for external
clocksources such as HPET or the APIC PM timer. These latencies can
result in false-positive clocksource-unstable determinations.
These issues were initially reported by a customer running on a production
system, and this problem was reproduced on several generations of Xeon
servers, especially when running the stress-ng test. These Xeon servers
were not production systems, but they did have the latest steppings
and firmware.
Given that the clocksource watchdog is a continual diagnostic check with
frequency of twice a second, there is no need to rush it when the system
is under heavy load. Therefore, when high clocksource read latencies
are detected, suspend the watchdog timer for 5 minutes.
Signed-off-by: Feng Tang <feng.tang@intel.com> Acked-by: Waiman Long <longman@redhat.com> Cc: John Stultz <jstultz@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Feng Tang <feng.tang@intel.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add the PCI ID for the Wellsburg C610 series chipset PCH.
The driver can read the temperature from the Wellsburg PCH with only
the PCI ID added and no other modifications.
Signed-off-by: Tim Zimmermann <tim@linux4.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This prevents CONFIG_FUNCTION_ALIGNMENT and
CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B from having their expected effect
on the ACPICA code. This is doubly unfortunate as in subsequent patches
arm64 will depend upon CONFIG_FUNCTION_ALIGNMENT for its ftrace
implementation.
Drop the '-Os' flag when building the ACPICA code. With this removed,
the code builds cleanly and works correctly in testing so far.
I've tested this by selecting CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y,
building and booting a kernel using ACPI, and looking for misaligned
text symbols:
With the patch applied, the remaining unaligned text labels are a
combination of static call trampolines and labels in assembly, which can
be dealt with in subsequent patches.
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Florent Revest <revest@chromium.org> Cc: Len Brown <lenb@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Deacon <will@kernel.org> Cc: linux-acpi@vger.kernel.org Link: https://lore.kernel.org/r/20230123134603.1064407-4-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There were a few places we had missed checking the VSI type to make sure
it was definitely a PF VSI, before calling setup functions intended only
for the PF VSI.
This doesn't fix any explicit bugs but cleans up the code in a few
places and removes one explicit != vsi->type check that can be
superseded by this code (it's a super set)
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The PHY provides only 39b timestamp. With current timing
implementation, we discard lower 7b, leaving 32b timestamp.
The driver reconstructs the full 64b timestamp by correlating the
32b timestamp with cached_time for performance. The reconstruction
algorithm does both forward & backward interpolation.
The 32b timeval has overflow duration of 2^32 counts ~= 4.23 second.
Due to interpolation in both direction, its now ~= 2.125 second
IIRC, going with at least half a duration, the cached_time is updated
with periodic thread of 1 second (worst-case) periodicity.
But the 1 second periodicity is based on System-timer.
With PPB adjustments, if the 1588 timers increments at say
double the rate, (2s in-place of 1s), the Nyquist rate/half duration
sampling/update of cached_time with 1 second periodic thread will
lead to incorrect interpolations.
Hence we should restrict the PPB adjustments to at least half duration
of cached_time update which translates to 500,000,000 PPB.
Since the periodicity of the cached-time system thread can vary,
it is good to have some buffer time and considering practicality of
PPB adjustments, limiting the max_adj to 100,000,000.
Signed-off-by: Siddaraju DH <siddaraju.dh@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
__inet_hash_connect() has a fast path taken if sk_head(&tb->owners) is
equal to the sk parameter.
sk_head() returns the hlist_entry() with respect to the sk_node field.
However entries in the tb->owners list are inserted with respect to the
sk_bind_node field with sk_add_bind_node().
Thus the check would never pass and the fast path never execute.
This fast path has never been executed or tested as this bug seems
to be present since commit 1da177e4c3f4 ("Linux-2.6.12-rc2"), thus
remove it to reduce code complexity.
Fix an integer underflow that leads to a null pointer dereference in
'mt7601u_rx_skb_from_seg()'. The variable 'dma_len' in the URB packet
could be manipulated, which could trigger an integer underflow of
'seg_len' in 'mt7601u_rx_process_seg()'. This underflow subsequently
causes the 'bad_frame' checks in 'mt7601u_rx_skb_from_seg()' to be
bypassed, eventually leading to a dereference of the pointer 'p', which
is a null pointer.
Ensure that 'dma_len' is greater than 'min_seg_len'.
Fix a stack-out-of-bounds read in brcmfmac that occurs
when 'buf' that is not null-terminated is passed as an argument of
strreplace() in brcmf_c_preinit_dcmds(). This buffer is filled with
a CLM version string by memcpy() in brcmf_fil_iovar_data_get().
Ensure buf is null-terminated.
When the clang toolchain has stack protection enabled in order to be
consistent with gcc - which just happens to be the case on Gentoo -
the bpftool build fails:
[...]
clang \
-I. \
-I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/include/uapi/ \
-I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/bpf/bpftool/bootstrap/libbpf/include \
-g -O2 -Wall -target bpf -c skeleton/pid_iter.bpf.c -o pid_iter.bpf.o
clang \
-I. \
-I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/include/uapi/ \
-I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/bpf/bpftool/bootstrap/libbpf/include \
-g -O2 -Wall -target bpf -c skeleton/profiler.bpf.c -o profiler.bpf.o
skeleton/profiler.bpf.c:40:14: error: A call to built-in function '__stack_chk_fail' is not supported.
int BPF_PROG(fentry_XXX)
^
skeleton/profiler.bpf.c:94:14: error: A call to built-in function '__stack_chk_fail' is not supported.
int BPF_PROG(fexit_XXX)
^
2 errors generated.
[...]
Since stack-protector makes no sense for the BPF bits just unconditionally
disable it.
Currently, x86_spec_ctrl_base is read at boot time and speculative bits
are set if Kconfig items are enabled. For example, IBRS is enabled if
CONFIG_CPU_IBRS_ENTRY is configured, etc. These MSR bits are not cleared
if the mitigations are disabled.
This is a problem when kexec-ing a kernel that has the mitigation
disabled from a kernel that has the mitigation enabled. In this case,
the MSR bits are not cleared during the new kernel boot. As a result,
this might have some performance degradation that is hard to pinpoint.
This problem does not happen if the machine is (hard) rebooted because
the bit will be cleared by default.
The nanosleep syscalls use the restart_block mechanism, with a quirk:
The `type` and `rmtp`/`compat_rmtp` fields are set up unconditionally on
syscall entry, while the rest of the restart_block is only set up in the
unlikely case that the syscall is actually interrupted by a signal (or
pseudo-signal) that doesn't have a signal handler.
If the restart_block was set up by a previous syscall (futex(...,
FUTEX_WAIT, ...) or poll()) and hasn't been invalidated somehow since then,
this will clobber some of the union fields used by futex_wait_restart() and
do_restart_poll().
If userspace afterwards wrongly calls the restart_syscall syscall,
futex_wait_restart()/do_restart_poll() will read struct fields that have
been clobbered.
This doesn't actually lead to anything particularly interesting because
none of the union fields contain trusted kernel data, and
futex(..., FUTEX_WAIT, ...) and poll() aren't syscalls where it makes much
sense to apply seccomp filters to their arguments.
So the current consequences are just of the "if userspace does bad stuff,
it can damage itself, and that's not a problem" flavor.
But still, it seems like a hazard for future developers, so invalidate the
restart_block when partly setting it up in the nanosleep syscalls.
The return value from the call to intel_tcc_get_tjmax() is int, which can
be a negative error code. However, the return value is being assigned to
an u32 variable 'tj_max', so making 'tj_max' an int.
Eliminate the following warning:
./drivers/thermal/intel/intel_soc_dts_iosf.c:394:5-11: WARNING: Unsigned expression compared with zero: tj_max < 0
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3637 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
ath11k fails to load if there are multiple ath11k PCI devices with same name:
ath11k_pci 0000:01:00.0: Hardware name qcn9074 hw1.0
debugfs: Directory 'ath11k' with parent '/' already present!
ath11k_pci 0000:01:00.0: failed to create ath11k debugfs
ath11k_pci 0000:01:00.0: failed to create soc core: -17
ath11k_pci 0000:01:00.0: failed to init core: -17
ath11k_pci: probe of 0000:01:00.0 failed with error -17
Fix this by creating a directory for each ath11k device using schema
<bus>-<devname>, for example "pci-0000:06:00.0". This directory created under
the top-level ath11k directory, for example /sys/kernel/debug/ath11k.
The reference to the toplevel ath11k directory is not stored anymore within ath11k, instead
it's retrieved using debugfs_lookup(). If the directory does not exist it will
be created. After the last directory from the ath11k directory is removed, for
example when doing rmmod ath11k, the empty ath11k directory is left in place,
it's a minor cosmetic issue anyway.